aboutsummaryrefslogtreecommitdiffstats
path: root/test/rfc7540_SUITE.erl
diff options
context:
space:
mode:
Diffstat (limited to 'test/rfc7540_SUITE.erl')
-rw-r--r--test/rfc7540_SUITE.erl594
1 files changed, 593 insertions, 1 deletions
diff --git a/test/rfc7540_SUITE.erl b/test/rfc7540_SUITE.erl
index a024d64..65321aa 100644
--- a/test/rfc7540_SUITE.erl
+++ b/test/rfc7540_SUITE.erl
@@ -17,6 +17,7 @@
-import(ct_helper, [config/2]).
-import(ct_helper, [doc/1]).
+-import(cowboy_test, [gun_open/1]).
-import(cowboy_test, [raw_open/1]).
-import(cowboy_test, [raw_send/2]).
-import(cowboy_test, [raw_recv_head/1]).
@@ -45,7 +46,8 @@ end_per_group(Name, _) ->
init_routes(_) -> [
{"localhost", [
{"/", hello_h, []},
- {"/echo/:key", echo_h, []}
+ {"/echo/:key", echo_h, []},
+ {"/resp/:key[/:arg]", resp_h, []}
]}
].
@@ -2731,3 +2733,593 @@ settings_initial_window_size_reject_overflow(Config) ->
%% Receive a FLOW_CONTROL_ERROR connection error.
{ok, << _:24, 7:8, _:72, 3:32 >>} = gen_tcp:recv(Socket, 17, 6000),
ok.
+
+%% (RFC7540 6.9.3)
+%% @todo The right way to do this seems to be to wait for the SETTINGS ack
+%% before we KNOW the flow control window was updated on the other side.
+% A receiver that wishes to use a smaller flow-control window than the
+% current size can send a new SETTINGS frame. However, the receiver
+% MUST be prepared to receive data that exceeds this window size, since
+% the sender might send data that exceeds the lower limit prior to
+% processing the SETTINGS frame.
+
+%% (RFC7540 6.10) CONTINUATION
+% CONTINUATION frames MUST be associated with a stream. If a
+% CONTINUATION frame is received whose stream identifier field is 0x0,
+% the recipient MUST respond with a connection error (Section 5.4.1) of
+% type PROTOCOL_ERROR.
+%
+% A CONTINUATION frame MUST be preceded by a HEADERS, PUSH_PROMISE or
+% CONTINUATION frame without the END_HEADERS flag set. A recipient
+% that observes violation of this rule MUST respond with a connection
+% error (Section 5.4.1) of type PROTOCOL_ERROR.
+
+%% (RFC7540 7) Error Codes
+% Unknown or unsupported error codes MUST NOT trigger any special
+% behavior. These MAY be treated by an implementation as being
+% equivalent to INTERNAL_ERROR.
+
+%% (RFC7540 8.1)
+% A HEADERS frame (and associated CONTINUATION frames) can only appear
+% at the start or end of a stream. An endpoint that receives a HEADERS
+% frame without the END_STREAM flag set after receiving a final (non-
+% informational) status code MUST treat the corresponding request or
+% response as malformed (Section 8.1.2.6).
+%
+%% @todo This one is interesting to implement because Cowboy DOES this.
+% A server can
+% send a complete response prior to the client sending an entire
+% request if the response does not depend on any portion of the request
+% that has not been sent and received. When this is true, a server MAY
+% request that the client abort transmission of a request without error
+% by sending a RST_STREAM with an error code of NO_ERROR after sending
+% a complete response (i.e., a frame with the END_STREAM flag).
+
+headers_reject_uppercase_header_name(Config) ->
+ doc("Requests containing uppercase header names must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a uppercase header name.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<"HELLO">>, <<"world">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_response_pseudo_headers(Config) ->
+ doc("Requests containing response pseudo-headers must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.1, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a response pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<":status">>, <<"200">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_unknown_pseudo_headers(Config) ->
+ doc("Requests containing unknown pseudo-headers must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.1, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with an unknown pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<":upgrade">>, <<"websocket">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+%% @todo Implement request trailers. reject_pseudo_headers_in_trailers(Config) ->
+% Pseudo-header fields MUST NOT appear in trailers.
+% Endpoints MUST treat a request or response that contains
+% undefined or invalid pseudo-header fields as malformed
+% (Section 8.1.2.6).
+
+reject_pseudo_headers_after_regular_headers(Config) ->
+ doc("Requests containing pseudo-headers after regular headers must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.1, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a pseudo-header after regular headers.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<"content-length">>, <<"0">>},
+ {<<":path">>, <<"/">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_connection_header(Config) ->
+ doc("Requests containing a connection header must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.2, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a connection header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<"connection">>, <<"close">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_keep_alive_header(Config) ->
+ doc("Requests containing a keep-alive header must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.2, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a keep-alive header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<"keep-alive">>, <<"timeout=5, max=1000">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_proxy_authenticate_header(Config) ->
+ doc("Requests containing a connection header must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.2, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a proxy-authenticate header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<"proxy-authenticate">>, <<"Basic">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_proxy_authorization_header(Config) ->
+ doc("Requests containing a connection header must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.2, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a proxy-authorization header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<"proxy-authorization">>, <<"Basic YWxhZGRpbjpvcGVuc2VzYW1l">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_transfer_encoding_header(Config) ->
+ doc("Requests containing a connection header must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.2, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a transfer-encoding header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<"transfer-encoding">>, <<"chunked">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_upgrade_header(Config) ->
+ doc("Requests containing a connection header must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.2, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a upgrade header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<"upgrade">>, <<"websocket">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+accept_te_header_value_trailers(Config) ->
+ doc("Requests containing a TE header with a value of \"trailers\" "
+ "must be accepted. (RFC7540 8.1.2.2)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a TE header with value "trailers".
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<"te">>, <<"trailers">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a response.
+ {ok, << _:24, 1:8, _:8, 1:32 >>} = gen_tcp:recv(Socket, 9, 1000),
+ ok.
+
+reject_te_header_other_values(Config) ->
+ doc("Requests containing a TE header with a value other than \"trailers\" must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.2, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a TE header with a different value.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>},
+ {<<"te">>, <<"trailers, deflate;q=0.5">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+%% (RFC7540 8.1.2.2)
+% This means that an intermediary transforming an HTTP/1.x message to
+% HTTP/2 will need to remove any header fields nominated by the
+% Connection header field, along with the Connection header field
+% itself. Such intermediaries SHOULD also remove other connection-
+% specific header fields, such as Keep-Alive, Proxy-Connection,
+% Transfer-Encoding, and Upgrade, even if they are not nominated by the
+% Connection header field.
+
+reject_userinfo(Config) ->
+ doc("An authority containing a userinfo component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with a userinfo authority component.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"user@localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<"/">>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+%% (RFC7540 8.1.2.3)
+% To ensure that the HTTP/1.1 request line can be reproduced
+% accurately, this pseudo-header field MUST be omitted when
+% translating from an HTTP/1.1 request that has a request target in
+% origin or asterisk form (see [RFC7230], Section 5.3). Clients
+% that generate HTTP/2 requests directly SHOULD use the ":authority"
+% pseudo-header field instead of the Host header field. An
+% intermediary that converts an HTTP/2 request to HTTP/1.1 MUST
+% create a Host header field if one is not present in a request by
+% copying the value of the ":authority" pseudo-header field.
+
+reject_empty_path(Config) ->
+ doc("A request containing an empty path component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with an empty path component.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<>>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_missing_pseudo_header_method(Config) ->
+ doc("A request without a method component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame without a :method pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<>>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_many_pseudo_header_method(Config) ->
+ doc("A request containing more than one method component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with more than one :method pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<>>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_missing_pseudo_header_scheme(Config) ->
+ doc("A request without a scheme component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame without a :scheme pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<>>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_many_pseudo_header_scheme(Config) ->
+ doc("A request containing more than one scheme component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with more than one :scheme pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<>>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_missing_pseudo_header_authority(Config) ->
+ doc("A request without an authority component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame without an :authority pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":path">>, <<>>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_many_pseudo_header_authority(Config) ->
+ doc("A request containing more than one authority component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with more than one :authority pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<>>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_missing_pseudo_header_path(Config) ->
+ doc("A request without a path component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame without a :path pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>} %% @todo Correct port number.
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+reject_many_pseudo_header_path(Config) ->
+ doc("A request containing more than one path component must be rejected "
+ "with a PROTOCOL_ERROR stream error. (RFC7540 8.1.2.3, RFC7540 8.1.2.6)"),
+ {ok, Socket} = do_handshake(Config),
+ %% Send a HEADERS frame with more than one :path pseudo-header.
+ {HeadersBlock, _} = cow_hpack:encode([
+ {<<":method">>, <<"GET">>},
+ {<<":scheme">>, <<"http">>},
+ {<<":authority">>, <<"localhost">>}, %% @todo Correct port number.
+ {<<":path">>, <<>>},
+ {<<":path">>, <<>>}
+ ]),
+ ok = gen_tcp:send(Socket, cow_http2:headers(1, fin, HeadersBlock)),
+ %% Receive a PROTOCOL_ERROR stream error.
+ {ok, << _:24, 3:8, _:8, 1:32, 1:32 >>} = gen_tcp:recv(Socket, 13, 6000),
+ ok.
+
+%% (RFC7540 8.1.2.4)
+% For HTTP/2 responses, a single ":status" pseudo-header field is
+% defined that carries the HTTP status code field (see [RFC7231],
+% Section 6). This pseudo-header field MUST be included in all
+% responses; otherwise, the response is malformed (Section 8.1.2.6).
+
+%% (RFC7540 8.1.2.5)
+% To allow for better compression efficiency, the Cookie header field
+% MAY be split into separate header fields, each with one or more
+% cookie-pairs. If there are multiple Cookie header fields after
+% decompression, these MUST be concatenated into a single octet string
+% using the two-octet delimiter of 0x3B, 0x20 (the ASCII string "; ")
+% before being passed into a non-HTTP/2 context, such as an HTTP/1.1
+% connection, or a generic HTTP server application.
+
+%% (RFC7540 8.1.2.6)
+% A request or response that includes a payload body can include a
+% content-length header field. A request or response is also malformed
+% if the value of a content-length header field does not equal the sum
+% of the DATA frame payload lengths that form the body. A response
+% that is defined to have no payload, as described in [RFC7230],
+% Section 3.3.2, can have a non-zero content-length header field, even
+% though no content is included in DATA frames.
+%
+% Intermediaries that process HTTP requests or responses (i.e., any
+% intermediary not acting as a tunnel) MUST NOT forward a malformed
+% request or response. Malformed requests or responses that are
+% detected MUST be treated as a stream error (Section 5.4.2) of type
+% PROTOCOL_ERROR.
+%
+% For malformed requests, a server MAY send an HTTP response prior to
+% closing or resetting the stream. Clients MUST NOT accept a malformed
+% response. Note that these requirements are intended to protect
+% against several types of common attacks against HTTP; they are
+% deliberately strict because being permissive can expose
+% implementations to these vulnerabilities.
+
+%% @todo It migh be worth reproducing the good examples. (RFC7540 8.1.3)
+
+%% (RFC7540 8.1.4)
+% A server MUST NOT indicate that a stream has not been processed
+% unless it can guarantee that fact. If frames that are on a stream
+% are passed to the application layer for any stream, then
+% REFUSED_STREAM MUST NOT be used for that stream, and a GOAWAY frame
+% MUST include a stream identifier that is greater than or equal to the
+% given stream identifier.
+
+%% (RFC7540 8.2)
+% Promised requests MUST be cacheable (see [RFC7231], Section 4.2.3),
+% MUST be safe (see [RFC7231], Section 4.2.1), and MUST NOT include a
+% request body.
+%
+% The server MUST include a value in the ":authority" pseudo-header
+% field for which the server is authoritative (see Section 10.1).
+%
+% A client cannot push. Thus, servers MUST treat the receipt of a
+% PUSH_PROMISE frame as a connection error (Section 5.4.1) of type
+% PROTOCOL_ERROR.
+
+%% (RFC7540 8.2.1)
+% The header fields in PUSH_PROMISE and any subsequent CONTINUATION
+% frames MUST be a valid and complete set of request header fields
+% (Section 8.1.2.3). The server MUST include a method in the ":method"
+% pseudo-header field that is safe and cacheable. If a client receives
+% a PUSH_PROMISE that does not include a complete and valid set of
+% header fields or the ":method" pseudo-header field identifies a
+% method that is not safe, it MUST respond with a stream error
+% (Section 5.4.2) of type PROTOCOL_ERROR.
+%
+%% @todo This probably should be documented.
+% The server SHOULD send PUSH_PROMISE (Section 6.6) frames prior to
+% sending any frames that reference the promised responses. This
+% avoids a race where clients issue requests prior to receiving any
+% PUSH_PROMISE frames.
+%
+% PUSH_PROMISE frames MUST NOT be sent by the client.
+%
+% PUSH_PROMISE frames can be sent by the server in response to any
+% client-initiated stream, but the stream MUST be in either the "open"
+% or "half-closed (remote)" state with respect to the server.
+% PUSH_PROMISE frames are interspersed with the frames that comprise a
+% response, though they cannot be interspersed with HEADERS and
+% CONTINUATION frames that comprise a single header block.
+
+%% (RFC7540 8.2.2)
+% If the client determines, for any reason, that it does not wish to
+% receive the pushed response from the server or if the server takes
+% too long to begin sending the promised response, the client can send
+% a RST_STREAM frame, using either the CANCEL or REFUSED_STREAM code
+% and referencing the pushed stream's identifier.
+%
+% A client can use the SETTINGS_MAX_CONCURRENT_STREAMS setting to limit
+% the number of responses that can be concurrently pushed by a server.
+% Advertising a SETTINGS_MAX_CONCURRENT_STREAMS value of zero disables
+% server push by preventing the server from creating the necessary
+% streams. This does not prohibit a server from sending PUSH_PROMISE
+% frames; clients need to reset any promised streams that are not
+% wanted.
+
+%% @todo Implement CONNECT. (RFC7540 8.3)
+
+status_code_421(Config) ->
+ doc("The 421 Misdirected Request status code can be sent. (RFC7540 9.1.2)"),
+ ConnPid = gun_open(Config),
+ Ref = gun:get(ConnPid, "/resp/reply2/421"),
+ {response, fin, 421, _} = gun:await(ConnPid, Ref),
+ ok.
+
+%% @todo Review (RFC7540 9.2, 9.2.1, 9.2.2) TLS 1.2 usage.
+%% We probably want different ways to enforce these to simplify the life
+%% of users. A function cowboy:start_h2_tls could do the same as start_tls
+%% but with the security requirements of HTTP/2 enforced. Another way is to
+%% have an option at the establishment of the connection that checks that
+%% the security of the connection is adequate.
+
+%% (RFC7540 10.3)
+% The HTTP/2 header field encoding allows the expression of names that
+% are not valid field names in the Internet Message Syntax used by
+% HTTP/1.1. Requests or responses containing invalid header field
+% names MUST be treated as malformed (Section 8.1.2.6).
+%
+% Similarly, HTTP/2 allows header field values that are not valid.
+% While most of the values that can be encoded will not alter header
+% field parsing, carriage return (CR, ASCII 0xd), line feed (LF, ASCII
+% 0xa), and the zero character (NUL, ASCII 0x0) might be exploited by
+% an attacker if they are translated verbatim. Any request or response
+% that contains a character not permitted in a header field value MUST
+% be treated as malformed (Section 8.1.2.6). Valid characters are
+% defined by the "field-content" ABNF rule in Section 3.2 of [RFC7230].
+
+%% (RFC7540 10.5) Denial-of-Service Considerations
+% An endpoint that doesn't monitor this behavior exposes itself to a
+% risk of denial-of-service attack. Implementations SHOULD track the
+% use of these features and set limits on their use. An endpoint MAY
+% treat activity that is suspicious as a connection error
+% (Section 5.4.1) of type ENHANCE_YOUR_CALM.
+
+%% (RFC7540 10.5.1)
+% A server that receives a larger header block than it is willing to
+% handle can send an HTTP 431 (Request Header Fields Too Large) status
+% code [RFC6585]. A client can discard responses that it cannot
+% process. The header block MUST be processed to ensure a consistent
+% connection state, unless the connection is closed.
+
+%% @todo Implement CONNECT and limit the number of CONNECT streams (RFC7540 10.5.2).
+
+%% @todo This probably should be documented. (RFC7540 10.6)
+% Implementations communicating on a secure channel MUST NOT compress
+% content that includes both confidential and attacker-controlled data
+% unless separate compression dictionaries are used for each source of
+% data. Compression MUST NOT be used if the source of data cannot be
+% reliably determined. Generic stream compression, such as that
+% provided by TLS, MUST NOT be used with HTTP/2 (see Section 9.2).
+
+%% (RFC7540 A)
+% An HTTP/2 implementation MAY treat the negotiation of any of the
+% following cipher suites with TLS 1.2 as a connection error
+% (Section 5.4.1) of type INADEQUATE_SECURITY.