erlang.mk ========= Common Makefile rules for building and testing Erlang applications. Also features support for dependencies and a package index. Why erlang.mk? -------------- A number of reasons might push someone to use erlang.mk instead of an Erlang-based build tool, including but not limited to the following: * You want a very fast compilation and test cycle * You want the full power of Unix at your disposal when hooking into your build tool * You want to use the deps mechanism with non-Erlang Makefile-based projects * Your project will be part of a larger make or automake based environment Requirements ------------ `erlang.mk` requires GNU Make and expects to be ran in a standard unix environment with Erlang installed and in the `$PATH`. `erlang.mk` uses `wget` for downloading the package index file. `erlang.mk` will NOT work if the path contains spaces. This is a limitation of POSIX compatible make build tools. Usage ----- Add the file `erlang.mk` to your project, then use the following base Makefile: ``` Makefile PROJECT = my_project include erlang.mk ``` Alternatively you can use the following command to generate a skeleton of an OTP application: ``` bash $ make -f erlang.mk bootstrap ``` To generate a skeleton of an OTP library: ``` bash $ make -f erlang.mk bootstrap-lib ``` Finally if you are going to create a release of this project you may want to also use the `bootstrap-rel` target. You can combine targets to perform many operations. For example, the shell command `make clean app` will have the effect of recompiling the application fully, without touching the dependencies. A common workflow when editing a file would be to run `make` regularly to see if it compiles (or less often `make clean app` if you want to recompile everything), followed by `make dialyze` to see if there are any type errors and then `make tests` to run the test suites. The result of the test runs can be browsed from the `logs/index.html` file. Getting help ------------ You can use `make help` to get help about erlang.mk or its plugins. Packages -------- A package index functionality is included with erlang.mk. To use a package, you simply have to add it to the `DEPS` variable in your Makefile. For example this depends on Cowboy: ``` Makefile PROJECT = my_project DEPS = cowboy include erlang.mk ``` If you need to specify multiple dependencies, you can specify each of them separated by spaces: ``` Makefile PROJECT = my_project DEPS = cowboy gun include erlang.mk ``` If the project you want is not included in the package index, or if you want a different version, a few options are available. You can edit the package file and contribute to it by opening a pull request. You can use a custom package file, in which case you will probably want to set the `PKG_FILE2` variable to its location. Or you can put the project information directly in the Makefile. In the latter case you need to create a variable `dep_*` with the asterisk replaced by the project name, for example `cowboy`. This variable must contain three things: the fetching method used, the URL and the version requested. These lines must be defined before the erlang.mk include line. The following snippet overrides the Cowboy version required: ``` Makefile DEPS = cowboy dep_cowboy = git https://github.com/ninenines/cowboy 1.0.0 ``` They will always be compiled using the command `make`. If the dependency does not feature a Makefile, then erlang.mk will be used for building. You can also specify test-only dependencies. These dependencies will only be downloaded when running `make tests`. The format is the same as above, except the variable `TEST_DEPS` holds the list of test-only dependencies. ``` erlang TEST_DEPS = ct_helper dep_ct_helper = git https://github.com/extend/ct_helper.git master ``` Please note that the test dependencies will only be compiled once when they are fetched, unlike the normal dependencies. Releases -------- If a `relx.config` file is present, erlang.mk will download `relx` automatically and build the release into the `_rel` folder. This is the default command when the file exists. No special configuration is required for this to work. Customization ------------- A custom erlang.mk may be created by editing the `build.config` file and then running `make`. Only the core package handling and erlc support are required. If you need more functionality out of your Makefile, you can add extra targets after the include line, or create an erlang.mk plugin. Defining a target before the include line will override the default target `all`. The rest of this README starts by listing the core functionality and then details each plugin individually. Core functionality ------------------ The following targets are standard: `all` is equivalent to `deps app rel`. `deps` fetches and compiles the dependencies. `app` compiles the application. `rel` builds the release. `docs` generates the documentation. `tests` runs the test suites. `clean` deletes the output files. `distclean` deletes the output files but also any intermediate files that are usually worth keeping around to save time, and any other files needed by plugins (for example the Dialyzer PLT file). `help` gives some help about using erlang.mk. You may add additional operations to them by using the double colons. Make will run all targets sharing the same name when invoked. ``` Makefile clean:: @rm anotherfile ``` You can enable verbose mode by calling Make with the variable `V` set to 1. ``` bash $ V=1 make ``` Core package functionality -------------------------- The following targets are specific to packages: `pkg-list` lists all packages in the index. `pkg-search n=STRING` searches the index for STRING. Packages are downloaded into `DEPS_DIR` (`./deps/` by default). The package index file is downloaded from `PKG_FILE_URL` and saved in `PKG_FILE2`. Core compiler functionality --------------------------- erlang.mk will automatically compile the OTP application resource file found in `src/$(PROJECT).app.src` (do note it requires an empty `modules` line); Erlang source files found in `src/*.erl` or any subdirectory; Core Erlang source files found in `src/*.core` or any subdirectory; Leex source files found in `src/*.xrl` or any subdirectory; and Yecc source files found in `src/*.yrl` or any subdirectory. You can change compilation options by setting the `ERLC_OPTS` variable. It takes the arguments that will then be passed to `erlc`. For more information, please see `erl -man erlc`. You can specify a list of modules to be compiled first using the `COMPILE_FIRST` variable. You can also use the `ERLC_EXCLUDE` variable to prevent some modules from being compiled by the core compiler. Note that `ERLC_EXCLUDE` is a list of module names (i.e., no file extension is required). If `{id, "git"},` is found in your project's `.app.src`, the extended output of `git describe ...` will replace it. This can be retrieved at runtime via `application:get_key/2`. Updating erlang.mk ------------------ You can update erlang.mk by running `make erlang-mk`. This automated update will always take the latest erlang.mk version, compile it and replace the erlang.mk of your project with the updated version. If your project includes a `build.config`, erlang.mk will use it when building the updated version. The `ERLANG_MK_BUILD_CONFIG` variable can be used to rename the `build.config` file. The `ERLANG_MK_BUILD_DIR` variable contains the path to the temporary directory used to build the updated erlang.mk. Bootstrap plugin ---------------- This plugin is available by default. It adds the following targets: `bootstrap` generates a skeleton of an OTP application. `bootstrap-lib` generates a skeleton of an OTP library. `bootstrap-rel` generates the files needed to build a release. `new` generate a skeleton module based on one of the available templates. `list-templates` lists the available templates. C/C++ compiler plugin --------------------- This plugin is available by default. It is meant to simplify the management of projects that include C and/or C++ source code, like NIFs for example. If the file `$(C_SRC_DIR)/Makefile` exists, then the plugin simply calls it when needed. Otherwise it tries to compile it directly. You can use a different directory than `./c_src` by setting the `C_SRC_DIR` variable. You can override the output file by setting the `C_SRC_OUTPUT` variable. You can override the temporary file containing information about Erlang's environment by setting the `C_SRC_ENV` variable. This file is automatically generated on first run. The `CC`, `CXX`, `CFLAGS`, `CXXFLAGS`, `LDLIBS` and `LDFLAGS` variables may be modified or replaced with any value of your choosing. The defaults are system dependent. Common_test plugin ------------------ This plugin is available by default. There is nothing to configure to use it, simply create your test suites in the `./test/` directory and erlang.mk will figure everything out automatically. You can override the list of suites that will run when using `make tests` by setting the `CT_SUITES` variable. You can add extra `ct_run` options by defining the `CT_OPTS` variable. For more information please see `erl -man ct_run`. You can run an individual test suite by using the special `ct-*` targets. For example if you have a common_test suite named `spdy` and you want to run only this suite and not the others, you can use the `make ct-spdy` command. Dialyzer plugin --------------- This plugin is available by default. It adds the following targets: `plt` builds the PLT file for this application. `dialyze` runs Dialyzer. The PLT file is built in `./$(PROJECT).plt` by default. You can override this location by setting the `DIALYZER_PLT` variable. The `PLT_APPS` variable lists the applications that will be included in the PLT file. There is no need to specify `erts`, `kernel`, `stdlib` or the project's dependencies here, as they are automatically added. Dialyzer options can be modified by defining the `DIALYZER_OPTS` variable. The directories to be analyzed can be overriden using the `DIALYZER_DIRS` variable. It defaults to analyzing source files recursively found in `src/`. For more information please see `erl -man dialyzer`. EDoc plugin ----------- This plugin is available by default. EDoc options can be specified in Erlang format by defining the `EDOC_OPTS` variable. For more information please see `erl -man edoc`. Elvis plugin ------------ This plugin is available by default. It adds the following target: `elvis` runs Elvis style checker for this application. The `ELVIS_CONFIG` variable specifies the location of the configuration file which holds the rules to be applied. If there's no `elvis.config` file the default one will be downloaded. When the `ELVIS` variable points to a non-existing file then the `elvis` executable will be downloaded as well. Any other option should go in the `ELVIS_OPTS` variable. ErlyDTL plugin -------------- This plugin is available by default. It adds automatic compilation of ErlyDTL templates found in `templates/*.dtl` or any subdirectory. Escript plugin -------------- This plugin is available by default. It adds the following target: `escript` which creates a shell-executable archive named the same as your `$(PROJECT)`, containing the following files from your application and its dependencies: * `*.beam` * contents of `priv/` * `sys.config` for your application There are a number of optional configuration parameters: * `ESCRIPT_NAME` if a different output file is required * `ESCRIPT_COMMENT` to alter the comment line in the escript header * `ESCRIPT_BEAMS` for the paths searched for `*.beam` files to include * `ESCRIPT_SYS_CONFIG` defaults to `rel/sys.config` * `ESCRIPT_EMU_ARGS` for the parameters used to start the VM * `ESCRIPT_SHEBANG` for the line used by your shell to start `escript` * `ESCRIPT_STATIC` for non-beam directories to be included as well Refer to http://www.erlang.org/doc/man/escript.html for more information on `escript` functionality in general. EUnit plugin ------------ This plugin is available by default. It adds the following target: `eunit` which runs all the EUnit tests found in `ebin` and any of the additional EUnit directories specified in `EUNIT_DIR`. `EUNIT_OPTS` can be used to specify EUnit-specific options (e.g. `verbose`) that will be used when calling `eunit:test/2`. This configuration parameter defaults to `verbose`. Note that EUnit options are specified as a comma-separated list of options. Relx plugin ----------- This plugin is available by default. You can change the location of the `relx` executable (downloaded automatically) by defining the `RELX` variable, and the location of the configuration file by defining the `RELX_CONFIG` variable. The URL used to download `relx` can be overriden by setting the `RELX_URL` variable. You can change the generated releases location by setting the `RELX_OUTPUT_DIR` variable. Any other option should go in the `RELX_OPTS` variable. If `RELX_OPTS` includes the `-o` option (instead of using `RELX_OUTPUT_DIR`, then that option must be the first in the list, otherwise erlang.mk will fail to find it and will not be able to clean up the release directory. Shell plugin ------------ This plugin is available by default. `SHELL_DEPS` adds the specified modules only when `make shell` or `make build-shell-deps` is run. For example, to include a module reloader and TDD test runner, one might add `SHELL_DEPS = tddreloader` to the Makefile. You can add extra `erl` options by defining the `SHELL_OPTS` variable. For more information please see `erl -man erl`. `SHELL_PATH` adds paths to the shell's library search path. By default this option sets the paths to `-pa ../$(PROJECT)/ebin $(DEPS_DIR)/*/ebin`. Contributing ------------ You can contribute by providing feedback, creating patches, adding packages to the index or new features as plugins. To add a package to the index, please use the `pkg_add.sh` script. To use it, first fork the repository, then please follow the example below: ``` bash $ git clone https://github.com/$YOURUSERNAME/erlang.mk $ cd erlang.mk $ ./pkg_add.sh cowboy git https://github.com/ninenines/cowboy 1.0.0 http://ninenines.eu "Small, fast and modular HTTP server." $ git push origin master ``` Then open a pull request. The arguments given to the script are, in order, the project name, the download method used, the repository URL, the commit/tag/branch/version to pull, a link to the package's website and finally its description. Make sure to put double quotes around the description. You can submit as many packages as you want in one pull request as long as you follow the instructions above. For patches or plugins, you have to edit the `core/*.mk` or `plugins/*.mk` files and then run `make` to create an updated `erlang.mk`. If you submit a new plugin, you also need to add it to the `build.config` file. Make sure to keep the commit title short, to have a single commit per package/feature/fix and you're good to submit a pull request! And again, please don't forget to run make and to commit the updated erlang.mk or index files along with your other changes. Thanks! Support ------- * Official IRC Channel: #ninenines on irc.freenode.net * [Mailing Lists](http://lists.ninenines.eu)