%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2007-2016. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
%% SCTP protocol contribution by Leonid Timochouk and Serge Aleynikov.
%% See also: $ERL_TOP/lib/kernel/AUTHORS
%%
%%
%% SCTP-related records.
%%
%% sctp_initmsg: For creating a new association (send*) and
%% SCTP_OPT_INITMSG setsockopt:
-record(sctp_initmsg,
{
num_ostreams, % 0 Use endpoint default
max_instreams, % 0 Use endpoint default
max_attempts, % 0 Use endpoint default
max_init_timeo % 0 Use endpoint default
}).
%% sctp_sndrcvinfo: Possible "flags": Atoms, as below. Used
%% in "send*" and SCTP_OPT_DEFAULT_SEND_PARAM setsockopt:
-record(sctp_sndrcvinfo,
{
stream, % 0 Streams numbered from 0 (XXX?)
ssn, % 0, Ignored for send
flags, % [unordered,
%% addr_over,
%% abort,
%% eof]
ppid, % 0, Passed to the remote end
context, % 0, Passed to the user on error
timetolive, % 0, In msec; 0 -> no expiration
tsn, % 0, Recv only: TSN of one of the chunks
cumtsn, % 0, Only for unordered recv
assoc_id % 0 IMPORTANT!
}).
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%
%% SCTP Notification Events:
%%
%% sctp_assoc_change: Possible valid "state" values include:
%% comm_up, comm_lost, restart,
%% shutdown_comp, cant_assoc
-record(sctp_assoc_change,
{
state = cant_assoc,
error = 0,
outbound_streams = 0,
inbound_streams = 0,
assoc_id = 0
}).
%% sctp_paddr_change: Peer address is a list. Possible "state" values:
%% addr_available, addr_unreachable,
%% addr_removed, addr_added,
%% addr_made_prim
-record(sctp_paddr_change,
{
addr = [0,0,0,0],
state = addr_available,
error = 0,
assoc_id = 0
}).
%% sctp_remote_error: Possible "data" elements are Error Causes (Atoms
%% (extending the info provided by "error" field).
-record(sctp_remote_error,
{
error = 0,
assoc_id = 0,
data = []
}).
%% sctp_send_failed: The "flags" is a Boolean specifying whether the
%% data have actually been transmitted over the wire.
%% "error" is similar to in #sctp_remote_error{} above.
%% "info" is the orig "*sndrcvinfo", and "data" is
%% the whole orig data chunk we attempted to send:
-record(sctp_send_failed,
{
flags = false,
error = 0,
info = #sctp_sndrcvinfo{},
assoc_id = 0,
data = <<>>
}).
%% sctp_shutdown_event: In this case, shut-down occurs on a particular
%% association, not on the whole socket.
-record(sctp_shutdown_event,
{
assoc_id = 0
}).
%% sctp_adaptation_event: "adaptation_ind" is opaque user-specified data:
-record(sctp_adaptation_event,
{
adaptation_ind = 0,
assoc_id = 0
}).
%% sctp_partial_delivery_event: XXX: Not clear whether it is delivered to
%% the Sender or to the Recipient (probably the
%% former). Currently, there is only 1 possible
%% value for "indication":
-record(sctp_pdapi_event,
{
indication = partial_delivery_aborted,
assoc_id = 0
}).
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%
%% SCTP Socket Options:
%%
-record(sctp_rtoinfo, % For SCTP_OPT_RTOINFO
{
assoc_id,
initial, % 0
max, % 0
min % 0
}).
-record(sctp_assocparams, % For SCTP_OPT_ASSOCINFO
{
assoc_id,
asocmaxrxt, % 0
number_peer_destinations, % 0
peer_rwnd, % 0
local_rwnd, % 0
cookie_life % 0
}).
% #sctp_initmsg{} and #sctp_sndrcvinfo{}, declared above, can also be options.
-record(sctp_prim, % For SCTP_OPT_SET_PRIMARY_ADDR and
{
assoc_id,
addr % When set: {IP, Port}
}).
-record(sctp_setpeerprim, % For SCTP_OPT_SET_PEER_PRIMARY_ADDR
{
assoc_id,
addr % When set: { IP, Port}
}).
-record(sctp_setadaptation, % For SCTP_OPT_ADAPTATION_LAYER
{
adaptation_ind % 0
}).
-record(sctp_paddrparams, % For SCTP_OPT_PEER_ADDR_PARAMS
{
assoc_id,
address, % When set: {IP, Port}
hbinterval, % 0
pathmaxrxt, % 0
pathmtu, % 0
sackdelay, % 0
flags % [hb_enable,
%% hb_disable
%% hb_demand,
%% pmtud_enable,
%% pmtud_disable,
%% sackdelay_enable,
%% sackdelay_disable]
}).
% SCTP events which will be subscribed by default upon opening the socket.
% NB: "data_io_event" controls delivery of #sctp_sndrcvinfo{} ancilary
% data, not events (which are normal data) in fact; it may be needed in
% order to get the AssocID of data just received:
%
-record(sctp_event_subscribe,
{
data_io_event, % true, % Used by gen_sctp
association_event, % true, % Used by gen_sctp
address_event, % true, % Unlikely to happen...
send_failure_event, % true, % Delivered as an ERROR
peer_error_event, % true, % Delivered as an ERROR
shutdown_event, % true, % Used by gen_sctp
partial_delivery_event, % true, % Unlikely to happen...
adaptation_layer_event, % false % Probably not needed...
authentication_event % false % Not implemented yet...
}).
-record(sctp_assoc_value, % For SCTP_OPT_DELAYED_ACK_TIME
{
assoc_id,
assoc_value % 0
}).
% sctp_paddrinfo and sctp_status are records for read-only options:
-record(sctp_paddrinfo,
{
assoc_id,
address, % When set: {IP, Port}
state, % 'inactive', Or 'active'
cwnd, % 0
srtt, % 0,
rto, % 0
mtu % 0
}).
-record(sctp_status,
{
assoc_id,
state, % empty,
% Other possible states:
% closed, cookie_wait,
% cookie_echoed, established,
% shutdown_pending, shutdow_sent,
% shutdown_received, shutdown_ack_sent;
% NOT YET IMPLEMENTED:
% bound, listen
rwnd, % 0
unackdata, % 0,
penddata, % 0,
instrms, % 0,
outstrms, % 0,
fragmentation_point, % 0,
primary % When set: an #sctp_paddrinfo{} record
}).
