%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2010-2017. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
%%
%% This module implements (as a process) the RFC 3588/6733 Peer State
%% Machine modulo the necessity of adapting the peer election to the
%% fact that we don't know the identity of a peer until we've received
%% a CER/CEA from it.
%%
-module(diameter_peer_fsm).
-behaviour(gen_server).
%% Interface towards diameter_watchdog.
-export([start/3,
result_code/2]).
%% Interface towards diameter.
-export([find/1]).
%% gen_server callbacks
-export([init/1,
handle_call/3,
handle_cast/2,
handle_info/2,
terminate/2,
code_change/3]).
%% diameter_peer_fsm_sup callback
-export([start_link/1]).
%% internal callbacks
-export([match/1]).
-include_lib("diameter/include/diameter.hrl").
-include("diameter_internal.hrl").
%% Values of Disconnect-Cause in DPR.
-define(GOAWAY, 2). %% DO_NOT_WANT_TO_TALK_TO_YOU
-define(BUSY, 1). %% BUSY
-define(REBOOT, 0). %% REBOOTING
%% Values of Inband-Security-Id.
-define(NO_INBAND_SECURITY, 0).
-define(TLS, 1).
%% Note that the a common dictionary hrl is purposely not included
%% since the common dictionary is an argument to start/3.
%% Keys in process dictionary.
-define(CB_KEY, cb). %% capabilities callback
-define(DPR_KEY, dpr). %% disconnect callback
-define(DPA_KEY, dpa). %% timeout for incoming DPA, or shutdown after
%% outgoing DPA
-define(REF_KEY, ref). %% transport_ref()
-define(Q_KEY, q). %% transport start queue
-define(START_KEY, start). %% start of connected transport
-define(SEQUENCE_KEY, mask). %% mask for sequence numbers
-define(RESTRICT_KEY, restrict). %% nodes for connection check
%% The default sequence mask.
-define(NOMASK, {0,32}).
%% A 2xxx series Result-Code. Not necessarily 2001.
-define(IS_SUCCESS(N), 2 == (N) div 1000).
%% Guards.
-define(IS_UINT32(N), (is_integer(N) andalso 0 =< N andalso 0 == N bsr 32)).
-define(IS_TIMEOUT(N), ?IS_UINT32(N)).
-define(IS_CAUSE(N), N == ?REBOOT; N == rebooting;
N == ?GOAWAY; N == goaway;
N == ?BUSY; N == busy).
%% RFC 6733:
%%
%% Timeout An application-defined timer has expired while waiting
%% for some event.
%%
%% Default timeout for reception of CER/CEA.
-define(CAPX_TIMEOUT, 10000).
%% Default timeout for DPA to be received in response to an outgoing
%% DPR. A bit short but the timeout used to be hardcoded. (So it could
%% be worse.)
-define(DPA_TIMEOUT, 1000).
%% Default timeout for the connection to be closed by the peer
%% following an outgoing DPA in response to an incoming DPR. It's the
%% recipient of DPA that should close the connection according to the
%% RFC.
-define(DPR_TIMEOUT, 5000).
-type uint32() :: diameter:'Unsigned32'().
-record(state,
{state %% of RFC 3588 Peer State Machine
:: {'Wait-Conn-Ack', uint32()}
| recv_CER
| {'Wait-CEA', uint32(), uint32()}
| 'Open',
mode :: accept | connect | {connect, reference()},
parent :: pid(), %% watchdog process
transport :: pid(), %% transport process
dictionary :: module(), %% common dictionary
service :: #diameter_service{} | undefined,
dpr = false :: false
| true %% DPR received, DPA sent
| {boolean(), uint32(), uint32()},
%% hop by hop and end to end identifiers in
%% outgoing DPR; boolean says whether or not
%% the request was sent explicitly with
%% diameter:call/4.
codec :: #{decode_format := diameter:decode_format(),
string_decode := boolean(),
strict_mbit := boolean(),
rfc := 3588 | 6733,
ordered_encode := false},
strict :: boolean(),
ack = false :: boolean(),
length_errors :: exit | handle | discard,
incoming_maxlen :: integer() | infinity}).
%% There are non-3588 states possible as a consequence of 5.6.1 of the
%% standard and the corresponding problem for incoming CEA's: we don't
%% know who we're talking to until either a CER or CEA has been
%% received. The CEA problem in particular makes it impossible to
%% follow the state machine exactly as documented in 3588: there can
%% be no election until the CEA arrives and we have an Origin-Host to
%% elect.
%%
%% Once upon a time start/2 started a process akin to that started by
%% start/3 below, which in turn started a watchdog/transport process
%% with the result that the watchdog could send DWR/DWA regardless of
%% whether or not the corresponding Peer State Machine was in its open
%% state; that is, before capabilities exchange had taken place. This
%% is not what RFC's 3588 and 3539 say (albeit not very clearly).
%% Watchdog messages are only exchanged on *open* connections, so the
%% 3539 state machine is more naturally placed on top of the 3588 Peer
%% State Machine rather than closer to the transport. This is what we
%% now do below: connect/accept call diameter_watchdog and return the
%% pid of the watchdog process, and the watchdog in turn calls start/3
%% below to start the process implementing the Peer State Machine.
%%
%% ---------------------------------------------------------------------------
%% # start/3
%% ---------------------------------------------------------------------------
-spec start(T, [Opt], {map(), [node()], module(), #diameter_service{}})
-> {reference(), pid()}
when T :: {connect|accept, diameter:transport_ref()},
Opt :: diameter:transport_opt().
%% diameter_config requires a non-empty list of applications on the
%% service but diameter_service then constrains the list to any
%% specified on the transport in question. Check here that the list is
%% still non-empty.
start({_,_} = Type, Opts, S) ->
Ack = make_ref(),
T = {Ack, self(), Type, Opts, S},
{ok, Pid} = diameter_peer_fsm_sup:start_child(T),
try
{erlang:monitor(process, Pid), Pid}
after
Pid ! Ack
end.
start_link(T) ->
{ok, _} = proc_lib:start_link(?MODULE,
init,
[T],
infinity,
diameter_lib:spawn_opts(server, [])).
%% find/1
%%
%% Identify both pids of a peer_fsm/transport pair.
find(Pid) ->
findl([{?MODULE, '_', Pid}, {?MODULE, Pid, '_'}]).
findl([]) ->
false;
findl([Pat | Rest]) ->
try
[{{_, Pid, TPid}, Pid}] = diameter_reg:match(Pat),
{Pid, TPid}
catch
error:_ ->
findl(Rest)
end.
%% ---------------------------------------------------------------------------
%% ---------------------------------------------------------------------------
%% init/1
init(T) ->
proc_lib:init_ack({ok, self()}),
gen_server:enter_loop(?MODULE, [], i(T)).
i({Ack, WPid, {M, Ref} = T, Opts, {SvcOpts, Nodes, Dict0, Svc}}) ->
erlang:monitor(process, WPid),
wait(Ack, WPid),
diameter_stats:reg(Ref),
#{sequence := Mask, incoming_maxlen := Maxlen}
= SvcOpts,
{[Cs,Ds], Rest} = proplists:split(Opts, [capabilities_cb, disconnect_cb]),
putr(?CB_KEY, {Ref, [F || {_,F} <- Cs]}),
putr(?DPR_KEY, [F || {_, F} <- Ds]),
putr(?REF_KEY, Ref),
putr(?SEQUENCE_KEY, Mask),
putr(?RESTRICT_KEY, Nodes),
putr(?DPA_KEY, {proplists:get_value(dpr_timeout, Opts, ?DPR_TIMEOUT),
proplists:get_value(dpa_timeout, Opts, ?DPA_TIMEOUT)}),
Tmo = proplists:get_value(capx_timeout, Opts, ?CAPX_TIMEOUT),
Strict = proplists:get_value(strict_capx, Opts, true),
LengthErr = proplists:get_value(length_errors, Opts, exit),
{TPid, Addrs} = start_transport(T, Rest, Svc),
diameter_reg:add({?MODULE, self(), TPid}), %% lets pairs be discovered
#state{state = {'Wait-Conn-Ack', Tmo},
parent = WPid,
transport = TPid,
dictionary = Dict0,
mode = M,
service = svc(Svc, Addrs),
length_errors = LengthErr,
strict = Strict,
incoming_maxlen = Maxlen,
codec = maps:with([decode_format,
string_decode,
strict_mbit,
rfc,
ordered_encode],
SvcOpts#{ordered_encode => false})}.
%% The transport returns its local ip addresses so that different
%% transports on the same service can use different local addresses.
%% The local addresses are put into Host-IP-Address avps here when
%% sending capabilities exchange messages.
%% Wait for the caller to have a monitor to avoid a race with our
%% death. (Since the exit reason is used in diameter_service.)
wait(Ref, Pid) ->
receive
Ref ->
ok;
{'DOWN', _, process, Pid, _} = D ->
x(D)
end.
x(T) ->
exit({shutdown, T}).
start_transport(T, Opts, #diameter_service{capabilities = LCaps} = Svc) ->
Addrs0 = LCaps#diameter_caps.host_ip_address,
start_transport(Addrs0, {T, Opts, Svc}).
start_transport(Addrs0, T) ->
case diameter_peer:start(T) of
{TPid, Addrs, Tmo, Data} ->
erlang:monitor(process, TPid),
q_next(TPid, Addrs0, Tmo, Data),
{TPid, Addrs};
{error, No} ->
x({no_connection, No})
end.
svc(#diameter_service{capabilities = LCaps0} = Svc, Addrs) ->
#diameter_caps{host_ip_address = Addrs0}
= LCaps0,
case Addrs0 of
[] ->
LCaps = LCaps0#diameter_caps{host_ip_address = Addrs},
Svc#diameter_service{capabilities = LCaps};
[_|_] ->
Svc
end.
readdr(#diameter_service{capabilities = LCaps0} = Svc, Addrs) ->
LCaps = LCaps0#diameter_caps{host_ip_address = Addrs},
Svc#diameter_service{capabilities = LCaps}.
%% The 4-tuple Data returned from diameter_peer:start/1 identifies the
%% transport module/config use to start the transport process in
%% question as well as any alternates to try if a connection isn't
%% established within Tmo.
q_next(TPid, Addrs0, Tmo, {_,_,_,_} = Data) ->
send_after(Tmo, {connection_timeout, TPid}),
putr(?Q_KEY, {Addrs0, Tmo, Data}).
%% Connection has been established: retain the started
%% pid/module/config in the process dictionary. This is a part of the
%% interface defined by this module, so that the transport pid can be
%% found when constructing service_info (in order to extract further
%% information from it).
keep_transport(TPid) ->
{_, _, {{_,_,_} = T, _, _, _}} = eraser(?Q_KEY),
putr(?START_KEY, {TPid, T}).
send_after(infinity, _) ->
ok;
send_after(Tmo, T) ->
erlang:send_after(Tmo, self(), T).
%% handle_call/3
handle_call(_, _, State) ->
{reply, nok, State}.
%% handle_cast/2
handle_cast(_, State) ->
{noreply, State}.
%% handle_info/1
handle_info(T, #state{} = State) ->
try transition(T, State) of
ok ->
{noreply, State};
#state{state = X} = S ->
?LOGC(X /= State#state.state, transition, X),
{noreply, S};
{stop, Reason} ->
?LOG(stop, Reason),
{stop, {shutdown, Reason}, State};
stop ->
?LOG(stop, truncate(T)),
{stop, {shutdown, T}, State}
catch
exit: {diameter_codec, encode, T} = Reason ->
incr_error(send, T, State#state.dictionary),
?LOG(stop, Reason),
{stop, {shutdown, Reason}, State};
{?MODULE, Tag, Reason} ->
?LOG(stop, Tag),
{stop, {shutdown, Reason}, State}
end.
%% The form of the throw caught here is historical. It's
%% significant that it's not a 2-tuple, as in ?FAILURE(Reason),
%% since these are caught elsewhere.
%% Note that there's no guarantee that the service and transport
%% capabilities are good enough to build a CER/CEA that can be
%% successfully encoded. It's not checked at diameter:add_transport/2
%% since this can be called before creating the service.
%% terminate/2
terminate(_, _) ->
ok.
%% code_change/3
code_change(_, State, _) ->
{ok, State}.
%% ---------------------------------------------------------------------------
%% ---------------------------------------------------------------------------
truncate({'DOWN' = T, _, process, Pid, _}) ->
{T, Pid};
truncate(T) ->
T.
putr(Key, Val) ->
put({?MODULE, Key}, Val).
getr(Key) ->
get({?MODULE, Key}).
eraser(Key) ->
erase({?MODULE, Key}).
%% transition/2
%% Connection to peer.
transition({diameter, {TPid, connected, Remote}},
#state{transport = TPid,
state = PS,
mode = M}
= S) ->
{'Wait-Conn-Ack', _} = PS, %% assert
connect = M, %%
keep_transport(TPid),
send_CER(S#state{mode = {M, Remote}});
transition({diameter, {TPid, connected, Remote, LAddrs}},
#state{transport = TPid,
service = Svc}
= S) ->
transition({diameter, {TPid, connected, Remote}},
S#state{service = svc(Svc, LAddrs)});
%% Connection from peer.
transition({diameter, {TPid, connected}},
#state{transport = TPid,
state = PS,
mode = M,
parent = Pid}
= S) ->
{'Wait-Conn-Ack', Tmo} = PS, %% assert
accept = M, %%
keep_transport(TPid),
Pid ! {accepted, self()},
start_timer(Tmo, S#state{state = recv_CER});
%% Connection established after receiving a connection_timeout
%% message. This may be followed by an incoming message which arrived
%% before the transport was killed and this can't be distinguished
%% from one from the transport that's been started to replace it.
transition({diameter, T}, _)
when tuple_size(T) < 5, connected == element(2,T) ->
{stop, connection_timeout};
%% Connection has timed out: start an alternate.
transition({connection_timeout = T, TPid},
#state{transport = TPid,
state = {'Wait-Conn-Ack', _}}
= S) ->
exit(TPid, {shutdown, T}),
start_next(S);
%% Connect timeout after connection or alternate start: ignore.
transition({connection_timeout, _}, _) ->
ok;
%% Requests for acknowledgements to the transport.
transition({diameter, ack}, S) ->
S#state{ack = true};
%% Incoming message from the transport.
transition({diameter, {recv, Msg}}, S) ->
incoming(recv(Msg, S), S);
%% Handler of an incoming request is telling of its existence.
transition({handler, Pid}, _) ->
put_route(Pid),
ok;
%% Timeout when still in the same state ...
transition({timeout = T, PS}, #state{state = PS}) ->
{stop, {capx(PS), T}};
%% ... or not.
transition({timeout, _}, _) ->
ok;
%% Outgoing message.
transition({send, Msg}, S) ->
outgoing(Msg, S);
transition({send, Msg, Route}, S) ->
route_outgoing(Route),
outgoing(Msg, S);
%% Request for graceful shutdown at remove_transport, stop_service of
%% application shutdown.
transition({shutdown, Pid, Reason}, #state{parent = Pid, dpr = false} = S) ->
dpr(Reason, S);
transition({shutdown, Pid, _}, #state{parent = Pid}) ->
ok;
%% DPA reception has timed out, or peer has not closed the connection
%% as a result of outgoing DPA.
transition(dpa_timeout, _) ->
stop;
%% Someone wants to know a resolved port: forward to the transport process.
transition({resolve_port, _Pid} = T, #state{transport = TPid}) ->
TPid ! T,
ok;
%% Parent has died.
transition({'DOWN', _, process, WPid, _},
#state{parent = WPid}) ->
stop;
%% Transport has died before connection timeout.
transition({'DOWN', _, process, TPid, _},
#state{transport = TPid}
= S) ->
start_next(S#state{ack = false});
%% Transport has died after connection timeout, or handler process has
%% died.
transition({'DOWN', _, process, Pid, _}, #state{transport = TPid}) ->
is_reference(erase_route(Pid))
andalso send(TPid, false), %% answer not forthcoming
ok;
%% State query.
transition({state, Pid}, #state{state = S, transport = TPid}) ->
Pid ! {self(), [S, TPid]},
ok.
%% Crash on anything unexpected.
%% route_outgoing/1
%% Map identifiers in an outgoing request to be able to lookup the
%% handler process when the answer is received.
route_outgoing({Pid, Ref, Seqs}) -> %% request
MRef = monitor(process, Pid),
put(Pid, Seqs),
put(Seqs, {Pid, Ref, MRef});
%% Remove a mapping made for an incoming request.
route_outgoing(Pid)
when is_pid(Pid) -> %% answer
MRef = erase_route(Pid),
undefined == MRef orelse demonitor(MRef).
%% put_route/1
%% Monitor on a handler process for an incoming request.
put_route(Pid) ->
MRef = monitor(process, Pid),
put(Pid, MRef).
%% get_route/2
%% incoming answer
get_route(_, #diameter_packet{header = #diameter_header{is_request = false}}
= Pkt) ->
Seqs = diameter_codec:sequence_numbers(Pkt),
case erase(Seqs) of
{Pid, Ref, MRef} ->
demonitor(MRef),
erase(Pid),
{Pid, Ref, self()};
undefined -> %% request unknown
false
end;
%% incoming request
get_route(Ack, _) ->
Ack.
%% erase_route/1
erase_route(Pid) ->
case erase(Pid) of
{_,_} = Seqs ->
erase(Seqs);
T ->
T
end.
%% capx/1
capx(recv_CER) ->
'CER';
capx({'Wait-CEA', _, _}) ->
'CEA'.
%% start_next/1
start_next(#state{service = Svc0} = S) ->
case getr(?Q_KEY) of
{Addrs0, Tmo, Data} ->
Svc = readdr(Svc0, Addrs0),
{TPid, Addrs} = start_transport(Addrs0, {Svc, Tmo, Data}),
S#state{transport = TPid,
service = svc(Svc, Addrs)};
undefined ->
stop
end.
%% send_CER/1
send_CER(#state{state = {'Wait-Conn-Ack', Tmo},
mode = {connect, Remote},
service = #diameter_service{capabilities = LCaps},
transport = TPid,
dictionary = Dict,
codec = Opts}
= S) ->
OH = LCaps#diameter_caps.origin_host,
req_send_CER(OH, Remote)
orelse
close({already_connected, Remote, LCaps}),
CER = build_CER(S),
#diameter_packet{header = #diameter_header{end_to_end_id = Eid,
hop_by_hop_id = Hid}}
= Pkt
= encode(CER, Opts, Dict),
incr(send, Pkt, Dict),
send(TPid, Pkt),
?LOG(send, 'CER'),
start_timer(Tmo, S#state{state = {'Wait-CEA', Hid, Eid}}).
%% Register ourselves as connecting to the remote endpoint in
%% question. This isn't strictly necessary since a peer implementing
%% the 3588 Peer State Machine should reject duplicate connection's
%% from the same peer but there's little point in us setting up a
%% duplicate connection in the first place. This could also include
%% the transport protocol being used but since we're blind to
%% transport just avoid duplicate connections to the same host/port.
req_send_CER(OriginHost, Remote) ->
register_everywhere({?MODULE, connection, OriginHost, {remote, Remote}}).
%% start_timer/2
start_timer(Tmo, #state{state = PS} = S) ->
erlang:send_after(Tmo, self(), {timeout, PS}),
S.
%% build_CER/1
build_CER(#state{service = #diameter_service{capabilities = LCaps},
dictionary = Dict}) ->
{ok, CER} = diameter_capx:build_CER(LCaps, Dict),
CER.
%% encode/3
encode(Rec, Opts, Dict) ->
Seq = diameter_session:sequence({_,_} = getr(?SEQUENCE_KEY)),
Hdr = #diameter_header{version = ?DIAMETER_VERSION,
end_to_end_id = Seq,
hop_by_hop_id = Seq},
diameter_codec:encode(Dict, Opts, #diameter_packet{header = Hdr,
msg = Rec}).
%% incoming/2
incoming(#diameter_header{is_request = R}, #state{transport = TPid,
ack = Ack}) ->
R andalso Ack andalso send(TPid, false),
ok;
incoming(<<_:32, 1:1, _/bits>>, #state{ack = true} = S) ->
send(S#state.transport, false),
ok;
incoming(<<_/bits>>, _) ->
ok;
incoming(T, _) ->
T.
%% recv/2
recv(#diameter_packet{bin = Bin} = Pkt, S) ->
recv(Bin, Pkt, S);
recv(Bin, S) ->
recv(Bin, Bin, S).
%% recv/3
recv(Bin, Msg, S) ->
recv(diameter_codec:decode_header(Bin), Bin, Msg, S).
%% recv/4
recv(false, Bin, _, #state{length_errors = E}) ->
invalid(E, truncated_header, Bin),
Bin;
recv(#diameter_header{length = Len} = H, Bin, Msg, #state{length_errors = E,
incoming_maxlen = M,
dictionary = Dict0}
= S)
when E == handle;
0 == Len rem 4, bit_size(Bin) == 8*Len, size(Bin) =< M ->
recv1(diameter_codec:msg_name(Dict0, H), H, Msg, S);
recv(H, Bin, _, #state{incoming_maxlen = M})
when M < size(Bin) ->
invalid(false, incoming_maxlen_exceeded, {size(Bin), H}),
H;
recv(H, Bin, _, #state{length_errors = E}) ->
T = {size(Bin), bit_size(Bin) rem 8, H},
invalid(E, message_length_mismatch, T),
H.
%% recv1/4
%% Ignore anything but an expected CER/CEA if so configured. This is
%% non-standard behaviour.
recv1(Name, H, _, #state{state = {'Wait-CEA', _, _},
strict = false})
when Name /= 'CEA' ->
H;
recv1(Name, H, _, #state{state = recv_CER,
strict = false})
when Name /= 'CER' ->
H;
%% Incoming request after outgoing DPR: discard. Don't discard DPR, so
%% both ends don't do so when sending simultaneously.
recv1(Name, #diameter_header{is_request = true} = H, _, #state{dpr = {_,_,_}})
when Name /= 'DPR' ->
invalid(false, recv_after_outgoing_dpr, H),
H;
%% Incoming request after incoming DPR: discard.
recv1(_, #diameter_header{is_request = true} = H, _, #state{dpr = true}) ->
invalid(false, recv_after_incoming_dpr, H),
H;
%% DPA with identifier mismatch, or in response to a DPR initiated by
%% the service.
recv1('DPA' = Name,
#diameter_header{hop_by_hop_id = Hid, end_to_end_id = Eid}
= H,
Msg,
#state{dpr = {X,HI,EI}}
= S)
when HI /= Hid;
EI /= Eid;
not X ->
Pkt = pkt(H, Msg),
handle(Name, Pkt, S);
%% Any other message with a header and no length errors.
recv1(Name, H, Msg, #state{parent = Pid, ack = Ack} = S) ->
Pkt = pkt(H, Msg),
Pid ! {recv, self(), get_route(Ack, Pkt), Name, Pkt},
handle(Name, Pkt, S).
%% pkt/2
pkt(H, Bin)
when is_binary(Bin) ->
#diameter_packet{header = H,
bin = Bin};
pkt(H, Pkt) ->
Pkt#diameter_packet{header = H}.
%% invalid/3
%% Note that counters here only count discarded messages.
invalid(E, Reason, T) ->
diameter_stats:incr(Reason),
E == exit andalso close({Reason, T}),
?LOG(Reason, T),
ok.
%% handle/3
%% Incoming CEA.
handle('CEA' = N,
#diameter_packet{header = #diameter_header{end_to_end_id = Eid,
hop_by_hop_id = Hid}}
= Pkt,
#state{state = {'Wait-CEA', Hid, Eid}}
= S) ->
?LOG(recv, N),
handle_CEA(Pkt, S);
%% Incoming CER
handle('CER' = N, Pkt, #state{state = recv_CER} = S) ->
handle_request(N, Pkt, S);
%% Anything but CER/CEA in a non-Open state is an error, as is
%% CER/CEA in anything but recv_CER/Wait-CEA.
handle(Name, _, #state{state = PS})
when PS /= 'Open';
Name == 'CER';
Name == 'CEA' ->
{stop, {Name, PS}};
handle('DPR' = N, Pkt, S) ->
handle_request(N, Pkt, S);
%% DPA in response to DPR, with the expected identifiers.
handle('DPA' = N,
#diameter_packet{header = #diameter_header{end_to_end_id = Eid,
hop_by_hop_id = Hid}
= H}
= Pkt,
#state{dictionary = Dict0,
transport = TPid,
dpr = {X, Hid, Eid},
codec = Opts}) ->
?LOG(recv, N),
X orelse begin
%% Only count DPA in response to a DPR sent by the
%% service: explicit DPR is counted in the same way
%% as other explicitly sent requests.
incr(recv, H, Dict0),
{_, RecPkt} = decode(Dict0, Opts, Pkt),
incr_rc(recv, RecPkt, Dict0)
end,
diameter_peer:close(TPid),
{stop, N};
%% Ignore an unsolicited DPA in particular. Note that dpa_timeout
%% deals with the case in which the peer sends the wrong identifiers
%% in DPA.
handle('DPA' = N, #diameter_packet{header = H}, _) ->
?LOG(ignored, N),
%% Note that these aren't counted in the normal recv counter.
diameter_stats:incr({diameter_codec:msg_id(H), recv, ignored}),
ok;
handle(_, _, _) ->
ok.
%% incr/3
incr(Dir, Hdr, Dict0) ->
diameter_traffic:incr(Dir, Hdr, self(), Dict0).
%% incr_rc/3
incr_rc(Dir, Pkt, Dict0) ->
diameter_traffic:incr_rc(Dir, Pkt, self(), Dict0).
%% incr_error/3
incr_error(Dir, Pkt, Dict0) ->
diameter_traffic:incr_error(Dir, Pkt, self(), Dict0).
%% send/2
%% Msg here could be a #diameter_packet or a binary depending on who's
%% sending. In particular, the watchdog will send DWR as a binary
%% while messages coming from clients will be in a #diameter_packet.
send(Pid, Msg) ->
diameter_peer:send(Pid, Msg).
%% outgoing/2
%% Explicit DPR.
outgoing(#diameter_packet{header = #diameter_header{application_id = 0,
cmd_code = 282,
is_request = true}
= H}
= Pkt,
#state{dpr = T,
parent = Pid}
= S) ->
if T == false ->
inform_dpr(Pid),
send_dpr(true, Pkt, dpa_timeout(), S);
T == true ->
invalid(false, dpr_after_dpa, H); %% DPA sent: discard
true ->
invalid(false, dpr_after_dpr, H) %% DPR sent: discard
end;
%% Explicit CER or DWR: discard. These are sent by us.
outgoing(#diameter_packet{header = #diameter_header{application_id = 0,
cmd_code = C,
is_request = true}
= H},
_)
when 257 == C; %% CER
280 == C -> %% DWR
invalid(false, invalid_request, H);
%% DPR not sent: send.
outgoing(Msg, #state{transport = TPid, dpr = false}) ->
send(TPid, Msg),
ok;
%% Outgoing answer: send.
outgoing(#diameter_packet{header = #diameter_header{is_request = false}}
= Pkt,
#state{transport = TPid}) ->
send(TPid, Pkt),
ok;
%% Outgoing request: discard.
outgoing(Msg, #state{dpr = {_,_,_}}) ->
invalid(false, send_after_dpr, header(Msg)).
header(#diameter_packet{header = H}) ->
H;
header(Bin) -> %% DWR
diameter_codec:decode_header(Bin).
%% handle_request/3
%%
%% Incoming CER or DPR.
handle_request(Name,
#diameter_packet{header = H}
= Pkt,
#state{dictionary = Dict0,
codec = Opts}
= S) ->
?LOG(recv, Name),
incr(recv, H, Dict0),
send_answer(Name, decode(Dict0, Opts, Pkt), S).
%% decode/3
%%
%% Decode the message as record for diameter_capx, and in the
%% configured format for events.
decode(Dict0, Opts, Pkt) ->
{diameter_codec:decode(Dict0, Opts, Pkt),
diameter_codec:decode(Dict0, Opts#{decode_format := record}, Pkt)}.
%% send_answer/3
send_answer(Type, {DecPkt, RecPkt}, #state{transport = TPid,
dictionary = Dict,
codec = Opts}
= S) ->
incr_error(recv, RecPkt, Dict),
#diameter_packet{header = H,
transport_data = TD}
= RecPkt,
{Msg, PostF} = build_answer(Type, DecPkt, RecPkt, S),
%% An answer message clears the R and T flags and retains the P
%% flag. The E flag is set at encode.
Pkt = #diameter_packet{header
= H#diameter_header{version = ?DIAMETER_VERSION,
is_request = false,
is_error = undefined,
is_retransmitted = false},
msg = Msg,
transport_data = TD},
AnsPkt = diameter_codec:encode(Dict, Opts, Pkt),
incr(send, AnsPkt, Dict),
incr_rc(send, AnsPkt, Dict),
send(TPid, AnsPkt),
?LOG(send, ans(Type)),
eval(PostF, S).
ans('CER') -> 'CEA';
ans('DPR') -> 'DPA'.
eval([F|A], S) ->
apply(F, A ++ [S]);
eval(T, _) ->
close(T).
%% build_answer/4
build_answer('CER',
DecPkt,
#diameter_packet{msg = CER,
header = #diameter_header{version
= ?DIAMETER_VERSION,
is_error = false},
errors = []},
#state{dictionary = Dict0}
= S) ->
{SupportedApps, RCaps, CEA} = recv_CER(CER, S),
[RC, IS] = Dict0:'#get-'(['Result-Code', 'Inband-Security-Id'], CEA),
#diameter_caps{origin_host = {OH, DH}}
= Caps
= capz(caps(S), RCaps),
try
2001 == RC %% DIAMETER_SUCCESS
orelse ?THROW(RC),
register_everywhere({?MODULE, connection, OH, DH})
orelse ?THROW(4003), %% DIAMETER_ELECTION_LOST
caps_cb(Caps)
of
N -> {cea(CEA, N, Dict0), [fun open/5, DecPkt,
SupportedApps,
Caps,
{accept, inband_security(IS)}]}
catch
?FAILURE(Reason) ->
rejected(Reason, {'CER', Reason, Caps, DecPkt}, S)
end;
%% The error checks below are similar to those in diameter_traffic for
%% other messages. Should factor out the commonality.
build_answer(Type,
DecPkt,
#diameter_packet{header = H,
errors = Es},
S) ->
{RC, FailedAVP} = result_code(Type, H, Es),
{answer(Type, RC, FailedAVP, S), post(Type, RC, DecPkt, S)}.
inband_security([]) ->
?NO_INBAND_SECURITY;
inband_security([IS]) ->
IS.
cea(CEA, ok, _) ->
CEA;
cea(CEA, 2001, _) ->
CEA;
cea(CEA, RC, Dict0) ->
Dict0:'#set-'({'Result-Code', RC}, CEA).
post('CER' = T, RC, Pkt, S) ->
{T, caps(S), {RC, Pkt}};
post('DPR', _, _, #state{parent = Pid}) ->
[fun(S) -> dpr_timer(), inform_dpr(Pid), dpr(S) end].
dpr(#state{dpr = false} = S) -> %% not awaiting DPA
S#state{dpr = true}; %% DPR received
dpr(S) -> %% DPR already sent or received
S.
inform_dpr(Pid) ->
Pid ! {'DPR', self()}. %% tell watchdog to die with us
rejected({capabilities_cb, _F, Reason}, T, S) ->
rejected(Reason, T, S);
rejected(discard, T, _) ->
close(T);
rejected({N, Es}, T, S) ->
{answer('CER', N, failed_avp(N, Es), S), T};
rejected(N, T, S) ->
{answer('CER', N, [], S), T}.
failed_avp(RC, [{RC, Avp} | _]) ->
[{'Failed-AVP', [[{'AVP', [Avp]}]]}];
failed_avp(RC, [_ | Es]) ->
failed_avp(RC, Es);
failed_avp(_, [] = No) ->
No.
answer(Type, RC, FailedAVP, S) ->
set(answer(Type, RC, S), FailedAVP).
answer(Type, RC, S) ->
answer_message(answer(Type, S), RC).
%% answer_message/2
answer_message([_ | Avps], RC)
when 3000 =< RC, RC < 4000 ->
['answer-message', {'Result-Code', RC}
| lists:filter(fun is_origin/1, Avps)];
answer_message(Msg, RC) ->
Msg ++ [{'Result-Code', RC}].
is_origin({N, _}) ->
N == 'Origin-Host'
orelse N == 'Origin-Realm'
orelse N == 'Origin-State-Id'.
%% set/2
set(Ans, []) ->
Ans;
set(['answer-message' | _] = Ans, FailedAvp) ->
Ans ++ [{'AVP', [FailedAvp]}];
set([_|_] = Ans, FailedAvp) ->
Ans ++ FailedAvp.
%% result_code/3
%% Be lenient with errors in DPR since there's no reason to be
%% otherwise. Rejecting may cause the peer to missinterpret the error
%% as meaning that the connection should not be closed, which may well
%% lead to more problems than any errors in the DPR.
result_code('DPR', _, _) ->
{2001, []};
result_code('CER', H, Es) ->
result_code(H, Es).
%% result_code/2
result_code(#diameter_header{is_error = true}, _) ->
{3008, []}; %% DIAMETER_INVALID_HDR_BITS
result_code(#diameter_header{version = ?DIAMETER_VERSION}, Es) ->
rc(Es);
result_code(_, _) ->
{5011, []}. %% DIAMETER_UNSUPPORTED_VERSION
%% rc/1
rc([]) ->
{2001, []}; %% DIAMETER_SUCCESS
rc([{RC, _} | _] = Es) ->
{RC, failed_avp(RC, Es)};
rc([RC|_]) ->
{RC, []}.
%% DIAMETER_INVALID_HDR_BITS 3008
%% A request was received whose bits in the Diameter header were
%% either set to an invalid combination, or to a value that is
%% inconsistent with the command code's definition.
%% DIAMETER_INVALID_AVP_BITS 3009
%% A request was received that included an AVP whose flag bits are
%% set to an unrecognized value, or that is inconsistent with the
%% AVP's definition.
%% ELECTION_LOST 4003
%% The peer has determined that it has lost the election process and
%% has therefore disconnected the transport connection.
%% DIAMETER_NO_COMMON_APPLICATION 5010
%% This error is returned when a CER message is received, and there
%% are no common applications supported between the peers.
%% DIAMETER_UNSUPPORTED_VERSION 5011
%% This error is returned when a request was received, whose version
%% number is unsupported.
%% answer/2
answer(Name, #state{service = #diameter_service{capabilities = Caps}}) ->
a(Name, Caps).
a('CER', #diameter_caps{vendor_id = Vid,
origin_host = Host,
origin_realm = Realm,
host_ip_address = Addrs,
product_name = Name,
origin_state_id = OSI}) ->
['CEA', {'Origin-Host', Host},
{'Origin-Realm', Realm},
{'Host-IP-Address', Addrs},
{'Vendor-Id', Vid},
{'Product-Name', Name},
{'Origin-State-Id', OSI}];
a('DPR', #diameter_caps{origin_host = {Host, _},
origin_realm = {Realm, _}}) ->
['DPA', {'Origin-Host', Host},
{'Origin-Realm', Realm}].
%% recv_CER/2
recv_CER(CER, #state{service = Svc, dictionary = Dict}) ->
case diameter_capx:recv_CER(CER, Svc, Dict) of
{ok, T} ->
T;
{error, Reason} ->
close({'CER', CER, Svc, Dict, Reason})
end.
%% handle_CEA/2
handle_CEA(#diameter_packet{header = H}
= Pkt,
#state{dictionary = Dict0,
service = #diameter_service{capabilities = LCaps},
codec = Opts}
= S) ->
incr(recv, H, Dict0),
{DecPkt, RecPkt} = decode(Dict0, Opts, Pkt),
RC = result_code(incr_rc(recv, RecPkt, Dict0)),
{SApps, IS, RCaps} = recv_CEA(RecPkt, S),
#diameter_caps{origin_host = {OH, DH}}
= Caps
= capz(LCaps, RCaps),
%% Ensure that we don't already have a connection to the peer in
%% question. This isn't the peer election of 3588 except in the
%% sense that, since we don't know who we're talking to until we
%% receive a CER/CEA, the first that arrives wins the right to a
%% connection with the peer.
try
is_integer(RC) andalso ?IS_SUCCESS(RC)
orelse ?THROW(RC),
[] == SApps
andalso ?THROW(no_common_application),
[] == IS
andalso ?THROW(no_common_security),
register_everywhere({?MODULE, connection, OH, DH})
orelse ?THROW(election_lost),
caps_cb(Caps)
of
_ -> open(DecPkt, SApps, Caps, {connect, hd([_] = IS)}, S)
catch
?FAILURE(Reason) -> close({'CEA', Reason, Caps, DecPkt})
end.
%% Check more than the result code since the peer could send success
%% regardless. If not 2001 then a peer_up callback could do anything
%% required. It's not unimaginable that a peer agreeing to TLS after
%% capabilities exchange could send DIAMETER_LIMITED_SUCCESS = 2002,
%% even if this isn't required by RFC 3588.
result_code({'Result-Code', N}) ->
N;
result_code(_) ->
undefined.
%% recv_CEA/2
recv_CEA(#diameter_packet{header = #diameter_header{version
= ?DIAMETER_VERSION,
is_error = false},
msg = CEA,
errors = []},
#state{service = Svc,
dictionary = Dict}) ->
case diameter_capx:recv_CEA(CEA, Svc, Dict) of
{ok, T} ->
T;
{error, Reason} ->
close({'CEA', CEA, Svc, Dict, Reason})
end;
recv_CEA(Pkt, S) ->
close({'CEA', caps(S), Pkt}).
caps(#diameter_service{capabilities = Caps}) ->
Caps;
caps(#state{service = Svc}) ->
caps(Svc).
%% caps_cb/1
caps_cb(Caps) ->
{Ref, Ts} = eraser(?CB_KEY),
caps_cb(Ts, [Ref, Caps]).
caps_cb([], _) ->
ok;
caps_cb([F | Rest], T) ->
case diameter_lib:eval([F|T]) of
ok ->
caps_cb(Rest, T);
N when ?IS_SUCCESS(N) -> %% 2xxx result code: accept immediately
N;
Res ->
?THROW({capabilities_cb, F, rejected(Res)})
end.
%% Note that returning 2xxx causes the capabilities exchange to be
%% accepted directly, without further callbacks.
rejected(discard = T) ->
T;
rejected(unknown) ->
3010; %% DIAMETER_UNKNOWN_PEER
rejected(N)
when is_integer(N) ->
N.
%% open/5
open(Pkt, SupportedApps, Caps, {Type, IS}, #state{parent = Pid,
service = Svc}
= S) ->
#diameter_caps{origin_host = {_,_} = H,
inband_security_id = {LS,_}}
= Caps,
tls_ack(lists:member(?TLS, LS), Caps, Type, IS, S),
Pid ! {open, self(), H, {Caps, SupportedApps, Pkt}},
%% Replace capabilities record with local/remote pairs.
S#state{state = 'Open',
service = Svc#diameter_service{capabilities = Caps}}.
%% We've advertised TLS support: tell the transport the result
%% and expect a reply when the handshake is complete.
tls_ack(true, Caps, Type, IS, #state{transport = TPid}) ->
Ref = make_ref(),
TPid ! {diameter, {tls, Ref, Type, IS == ?TLS}},
receive
{diameter, {tls, Ref}} ->
ok;
{'DOWN', _, process, TPid, Reason} ->
close({tls_ack, Reason, Caps})
end;
%% Or not. Don't send anything to the transport so that transports
%% not supporting TLS work as before without modification.
tls_ack(false, _, _, _, _) ->
ok.
capz(#diameter_caps{} = L, #diameter_caps{} = R) ->
#diameter_caps{}
= list_to_tuple([diameter_caps | lists:zip(tl(tuple_to_list(L)),
tl(tuple_to_list(R)))]).
%% close/1
%%
%% A good function to trace on in case of problems with capabilities
%% exchange.
close(Reason) ->
throw({?MODULE, close, Reason}).
%% dpr/2
%%
%% The RFC isn't clear on whether DPR should be sent in a non-Open
%% state. The Peer State Machine transitions it documents aren't
%% exhaustive (no Stop in Wait-I-CEA for example) so assume it's up to
%% the implementation and transition to Closed (ie. die) if we haven't
%% yet reached Open.
%% Connection is open, DPR has not been sent.
dpr(Reason, #state{state = 'Open',
dpr = false,
service = #diameter_service{capabilities = Caps}}
= S) ->
CBs = getr(?DPR_KEY),
Ref = getr(?REF_KEY),
Peer = {self(), Caps},
dpr(CBs, [Reason, Ref, Peer], S);
%% Connection is open, DPR already sent or received.
dpr(_, #state{state = 'Open'}) ->
ok;
%% Connection not open.
dpr(_Reason, _S) ->
stop.
%% dpr/3
%%
%% Note that an implementation that wants to do something
%% transport_module-specific can lookup the pid of the transport
%% process and contact it. (eg. diameter:service_info/2)
dpr([CB|Rest], [Reason | _] = Args, S) ->
case diameter_lib:eval([CB | Args]) of
{dpr, Opts} when is_list(Opts) ->
send_dpr(Reason, Opts, S);
dpr ->
send_dpr(Reason, [], S);
close = T ->
{stop, {disconnect_cb, T}};
ignore ->
dpr(Rest, Args, S);
T ->
?ERROR({disconnect_cb, CB, Args, T})
end;
dpr([], [Reason | _], S) ->
send_dpr(Reason, [], S).
-record(opts, {cause, timeout}).
send_dpr(Reason, DprOpts, #state{dictionary = Dict,
service = #diameter_service{capabilities = Caps},
codec = Opts}
= S) ->
#opts{cause = Cause, timeout = Tmo}
= lists:foldl(fun opt/2,
#opts{cause = case Reason of
transport -> ?GOAWAY;
_ -> ?REBOOT
end,
timeout = dpa_timeout()},
DprOpts),
#diameter_caps{origin_host = {OH, _},
origin_realm = {OR, _}}
= Caps,
Pkt = encode(['DPR', {'Origin-Host', OH},
{'Origin-Realm', OR},
{'Disconnect-Cause', Cause}],
Opts,
Dict),
send_dpr(false, Pkt, Tmo, S).
%% send_dpr/4
send_dpr(X,
#diameter_packet{header = #diameter_header{end_to_end_id = Eid,
hop_by_hop_id = Hid}}
= Pkt,
Tmo,
#state{transport = TPid,
dictionary = Dict}
= S) ->
%% Only count DPR sent by the service: explicit DPR is counted in
%% the same way as other explicitly sent requests.
X orelse incr(send, Pkt, Dict),
send(TPid, Pkt),
dpa_timer(Tmo),
?LOG(send, 'DPR'),
S#state{dpr = {X, Hid, Eid}}.
%% opt/2
opt({timeout, Tmo}, Rec)
when ?IS_TIMEOUT(Tmo) ->
Rec#opts{timeout = Tmo};
opt({cause, Cause}, Rec)
when ?IS_CAUSE(Cause) ->
Rec#opts{cause = cause(Cause)};
opt(T, _) ->
?ERROR({invalid_option, T}).
cause(rebooting) -> ?REBOOT;
cause(goaway) -> ?GOAWAY;
cause(busy) -> ?BUSY;
cause(N)
when ?IS_CAUSE(N) ->
N;
cause(N) ->
?ERROR({invalid_cause, N}).
dpa_timer(Tmo) ->
erlang:send_after(Tmo, self(), dpa_timeout).
dpa_timeout() ->
{_, Tmo} = getr(?DPA_KEY),
Tmo.
dpr_timer() ->
dpa_timer(dpr_timeout()).
dpr_timeout() ->
{Tmo, _} = getr(?DPA_KEY),
Tmo.
%% register_everywhere/1
%%
%% Register a term and ensure it's not registered elsewhere. Note that
%% two process that simultaneously register the same term may well
%% both fail to do so this isn't foolproof.
%%
%% Everywhere is no longer everywhere, it's where a
%% restrict_connections service_opt() specifies.
register_everywhere(T) ->
reg(getr(?RESTRICT_KEY), T).
reg(Nodes, T) ->
add(lists:member(node(), Nodes), T) andalso unregistered(Nodes, T).
add(true, T) ->
diameter_reg:add_new(T);
add(false, T) ->
diameter_reg:add(T).
%% unregistered
%%
%% Ensure that the term in question isn't registered on other nodes.
unregistered(Nodes, T) ->
{ResL, _} = rpc:multicall(Nodes, ?MODULE, match, [{node(), T}]),
lists:all(fun nomatch/1, ResL).
nomatch({badrpc, {'EXIT', {undef, _}}}) -> %% no diameter on remote node
true;
nomatch(L) ->
[] == L.
%% match/1
match({Node, _})
when Node == node() ->
[];
match({_, T}) ->
try
diameter_reg:match(T)
catch
_:_ -> []
end.
