The R13B03 release.OTP_R13B03

1 files changed, 3511 insertions, 0 deletions

diff --git a/lib/ssh/doc/standard/draft-ietf-secsh-filexfer-03.2.ps b/lib/ssh/doc/standard/draft-ietf-secsh-filexfer-03.2.ps
new file mode 100644
index 0000000000..6a40cd6067
--- /dev/null
+++ b/lib/ssh/doc/standard/draft-ietf-secsh-filexfer-03.2.ps
@@ -0,0 +1,3511 @@
+%!PS-Adobe-3.0
+%%BoundingBox: 75 0 595 747
+%%Title: Enscript Output
+%%For: Magnus Thoang
+%%Creator: GNU enscript 1.6.1
+%%CreationDate: Wed Nov 12 12:18:50 2003
+%%Orientation: Portrait
+%%Pages: 18 0
+%%DocumentMedia: A4 595 842 0 () ()
+%%DocumentNeededResources: (atend)
+%%EndComments
+%%BeginProlog
+%%BeginProcSet: PStoPS 1 15
+userdict begin
+[/showpage/erasepage/copypage]{dup where{pop dup load
+ type/operatortype eq{1 array cvx dup 0 3 index cvx put
+ bind def}{pop}ifelse}{pop}ifelse}forall
+[/letter/legal/executivepage/a4/a4small/b5/com10envelope
+ /monarchenvelope/c5envelope/dlenvelope/lettersmall/note
+ /folio/quarto/a5]{dup where{dup wcheck{exch{}put}
+ {pop{}def}ifelse}{pop}ifelse}forall
+/setpagedevice {pop}bind 1 index where{dup wcheck{3 1 roll put}
+ {pop def}ifelse}{def}ifelse
+/PStoPSmatrix matrix currentmatrix def
+/PStoPSxform matrix def/PStoPSclip{clippath}def
+/defaultmatrix{PStoPSmatrix exch PStoPSxform exch concatmatrix}bind def
+/initmatrix{matrix defaultmatrix setmatrix}bind def
+/initclip[{matrix currentmatrix PStoPSmatrix setmatrix
+ [{currentpoint}stopped{$error/newerror false put{newpath}}
+ {/newpath cvx 3 1 roll/moveto cvx 4 array astore cvx}ifelse]
+ {[/newpath cvx{/moveto cvx}{/lineto cvx}
+ {/curveto cvx}{/closepath cvx}pathforall]cvx exch pop}
+ stopped{$error/errorname get/invalidaccess eq{cleartomark
+ $error/newerror false put cvx exec}{stop}ifelse}if}bind aload pop
+ /initclip dup load dup type dup/operatortype eq{pop exch pop}
+ {dup/arraytype eq exch/packedarraytype eq or
+  {dup xcheck{exch pop aload pop}{pop cvx}ifelse}
+  {pop cvx}ifelse}ifelse
+ {newpath PStoPSclip clip newpath exec setmatrix} bind aload pop]cvx def
+/initgraphics{initmatrix newpath initclip 1 setlinewidth
+ 0 setlinecap 0 setlinejoin []0 setdash 0 setgray
+ 10 setmiterlimit}bind def
+end
+%%EndProcSet
+%%BeginResource: procset Enscript-Prolog 1.6 1
+%
+% Procedures.
+%
+
+/_S {	% save current state
+  /_s save def
+} def
+/_R {	% restore from saved state
+  _s restore
+} def
+
+/S {	% showpage protecting gstate
+  gsave
+  showpage
+  grestore
+} bind def
+
+/MF {	% fontname newfontname -> -	make a new encoded font
+  /newfontname exch def
+  /fontname exch def
+
+  /fontdict fontname findfont def
+  /newfont fontdict maxlength dict def
+
+  fontdict {
+    exch
+    dup /FID eq {
+      % skip FID pair
+      pop pop
+    } {
+      % copy to the new font dictionary
+      exch newfont 3 1 roll put
+    } ifelse
+  } forall
+
+  newfont /FontName newfontname put
+
+  % insert only valid encoding vectors
+  encoding_vector length 256 eq {
+    newfont /Encoding encoding_vector put
+  } if
+
+  newfontname newfont definefont pop
+} def
+
+/SF { % fontname width height -> -	set a new font
+  /height exch def
+  /width exch def
+
+  findfont
+  [width 0 0 height 0 0] makefont setfont
+} def
+
+/SUF { % fontname width height -> -	set a new user font
+  /height exch def
+  /width exch def
+
+  /F-gs-user-font MF
+  /F-gs-user-font width height SF
+} def
+
+/M {moveto} bind def
+/s {show} bind def
+
+/Box {	% x y w h -> -			define box path
+  /d_h exch def /d_w exch def /d_y exch def /d_x exch def
+  d_x d_y  moveto
+  d_w 0 rlineto
+  0 d_h rlineto
+  d_w neg 0 rlineto
+  closepath
+} def
+
+/bgs {	% x y height blskip gray str -> -	show string with bg color
+  /str exch def
+  /gray exch def
+  /blskip exch def
+  /height exch def
+  /y exch def
+  /x exch def
+
+  gsave
+    x y blskip sub str stringwidth pop height Box
+    gray setgray
+    fill
+  grestore
+  x y M str s
+} def
+
+% Highlight bars.
+/highlight_bars {	% nlines lineheight output_y_margin gray -> -
+  gsave
+    setgray
+    /ymarg exch def
+    /lineheight exch def
+    /nlines exch def
+
+    % This 2 is just a magic number to sync highlight lines to text.
+    0 d_header_y ymarg sub 2 sub translate
+
+    /cw d_output_w cols div def
+    /nrows d_output_h ymarg 2 mul sub lineheight div cvi def
+
+    % for each column
+    0 1 cols 1 sub {
+      cw mul /xp exch def
+
+      % for each rows
+      0 1 nrows 1 sub {
+        /rn exch def
+        rn lineheight mul neg /yp exch def
+        rn nlines idiv 2 mod 0 eq {
+	  % Draw highlight bar.  4 is just a magic indentation.
+	  xp 4 add yp cw 8 sub lineheight neg Box fill
+	} if
+      } for
+    } for
+
+  grestore
+} def
+
+% Line highlight bar.
+/line_highlight {	% x y width height gray -> -
+  gsave
+    /gray exch def
+    Box gray setgray fill
+  grestore
+} def
+
+% Column separator lines.
+/column_lines {
+  gsave
+    .1 setlinewidth
+    0 d_footer_h translate
+    /cw d_output_w cols div def
+    1 1 cols 1 sub {
+      cw mul 0 moveto
+      0 d_output_h rlineto stroke
+    } for
+  grestore
+} def
+
+% Column borders.
+/column_borders {
+  gsave
+    .1 setlinewidth
+    0 d_footer_h moveto
+    0 d_output_h rlineto
+    d_output_w 0 rlineto
+    0 d_output_h neg rlineto
+    closepath stroke
+  grestore
+} def
+
+% Do the actual underlay drawing
+/draw_underlay {
+  ul_style 0 eq {
+    ul_str true charpath stroke
+  } {
+    ul_str show
+  } ifelse
+} def
+
+% Underlay
+/underlay {	% - -> -
+  gsave
+    0 d_page_h translate
+    d_page_h neg d_page_w atan rotate
+
+    ul_gray setgray
+    ul_font setfont
+    /dw d_page_h dup mul d_page_w dup mul add sqrt def
+    ul_str stringwidth pop dw exch sub 2 div ul_h_ptsize -2 div moveto
+    draw_underlay
+  grestore
+} def
+
+/user_underlay {	% - -> -
+  gsave
+    ul_x ul_y translate
+    ul_angle rotate
+    ul_gray setgray
+    ul_font setfont
+    0 0 ul_h_ptsize 2 div sub moveto
+    draw_underlay
+  grestore
+} def
+
+% Page prefeed
+/page_prefeed {		% bool -> -
+  statusdict /prefeed known {
+    statusdict exch /prefeed exch put
+  } {
+    pop
+  } ifelse
+} def
+
+% Wrapped line markers
+/wrapped_line_mark {	% x y charwith charheight type -> -
+  /type exch def
+  /h exch def
+  /w exch def
+  /y exch def
+  /x exch def
+
+  type 2 eq {
+    % Black boxes (like TeX does)
+    gsave
+      0 setlinewidth
+      x w 4 div add y M
+      0 h rlineto w 2 div 0 rlineto 0 h neg rlineto
+      closepath fill
+    grestore
+  } {
+    type 3 eq {
+      % Small arrows
+      gsave
+        .2 setlinewidth
+        x w 2 div add y h 2 div add M
+        w 4 div 0 rlineto
+        x w 4 div add y lineto stroke
+
+        x w 4 div add w 8 div add y h 4 div add M
+        x w 4 div add y lineto
+	w 4 div h 8 div rlineto stroke
+      grestore
+    } {
+      % do nothing
+    } ifelse
+  } ifelse
+} def
+
+% EPSF import.
+
+/BeginEPSF {
+  /b4_Inc_state save def    		% Save state for cleanup
+  /dict_count countdictstack def	% Count objects on dict stack
+  /op_count count 1 sub def		% Count objects on operand stack
+  userdict begin
+  /showpage { } def
+  0 setgray 0 setlinecap
+  1 setlinewidth 0 setlinejoin
+  10 setmiterlimit [ ] 0 setdash newpath
+  /languagelevel where {
+    pop languagelevel
+    1 ne {
+      false setstrokeadjust false setoverprint
+    } if
+  } if
+} bind def
+
+/EndEPSF {
+  count op_count sub { pos } repeat	% Clean up stacks
+  countdictstack dict_count sub { end } repeat
+  b4_Inc_state restore
+} bind def
+
+% Check PostScript language level.
+/languagelevel where {
+  pop /gs_languagelevel languagelevel def
+} {
+  /gs_languagelevel 1 def
+} ifelse
+%%EndResource
+%%BeginResource: procset Enscript-Encoding-88591 1.6 1
+/encoding_vector [
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/space        	/exclam       	/quotedbl     	/numbersign   	
+/dollar       	/percent      	/ampersand    	/quoteright   	
+/parenleft    	/parenright   	/asterisk     	/plus         	
+/comma        	/hyphen       	/period       	/slash        	
+/zero         	/one          	/two          	/three        	
+/four         	/five         	/six          	/seven        	
+/eight        	/nine         	/colon        	/semicolon    	
+/less         	/equal        	/greater      	/question     	
+/at           	/A            	/B            	/C            	
+/D            	/E            	/F            	/G            	
+/H            	/I            	/J            	/K            	
+/L            	/M            	/N            	/O            	
+/P            	/Q            	/R            	/S            	
+/T            	/U            	/V            	/W            	
+/X            	/Y            	/Z            	/bracketleft  	
+/backslash    	/bracketright 	/asciicircum  	/underscore   	
+/quoteleft    	/a            	/b            	/c            	
+/d            	/e            	/f            	/g            	
+/h            	/i            	/j            	/k            	
+/l            	/m            	/n            	/o            	
+/p            	/q            	/r            	/s            	
+/t            	/u            	/v            	/w            	
+/x            	/y            	/z            	/braceleft    	
+/bar          	/braceright   	/tilde        	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/.notdef      	/.notdef      	/.notdef      	/.notdef      	
+/space        	/exclamdown   	/cent         	/sterling     	
+/currency     	/yen          	/brokenbar    	/section      	
+/dieresis     	/copyright    	/ordfeminine  	/guillemotleft	
+/logicalnot   	/hyphen       	/registered   	/macron       	
+/degree       	/plusminus    	/twosuperior  	/threesuperior	
+/acute        	/mu           	/paragraph    	/bullet       	
+/cedilla      	/onesuperior  	/ordmasculine 	/guillemotright	
+/onequarter   	/onehalf      	/threequarters	/questiondown 	
+/Agrave       	/Aacute       	/Acircumflex  	/Atilde       	
+/Adieresis    	/Aring        	/AE           	/Ccedilla     	
+/Egrave       	/Eacute       	/Ecircumflex  	/Edieresis    	
+/Igrave       	/Iacute       	/Icircumflex  	/Idieresis    	
+/Eth          	/Ntilde       	/Ograve       	/Oacute       	
+/Ocircumflex  	/Otilde       	/Odieresis    	/multiply     	
+/Oslash       	/Ugrave       	/Uacute       	/Ucircumflex  	
+/Udieresis    	/Yacute       	/Thorn        	/germandbls   	
+/agrave       	/aacute       	/acircumflex  	/atilde       	
+/adieresis    	/aring        	/ae           	/ccedilla     	
+/egrave       	/eacute       	/ecircumflex  	/edieresis    	
+/igrave       	/iacute       	/icircumflex  	/idieresis    	
+/eth          	/ntilde       	/ograve       	/oacute       	
+/ocircumflex  	/otilde       	/odieresis    	/divide       	
+/oslash       	/ugrave       	/uacute       	/ucircumflex  	
+/udieresis    	/yacute       	/thorn        	/ydieresis    	
+] def
+%%EndResource
+%%EndProlog
+%%BeginSetup
+%%IncludeResource: font Courier-Bold
+%%IncludeResource: font Courier
+/HFpt_w 10 def
+/HFpt_h 10 def
+/Courier-Bold /HF-gs-font MF
+/HF /HF-gs-font findfont [HFpt_w 0 0 HFpt_h 0 0] makefont def
+/Courier /F-gs-font MF
+/F-gs-font 10 10 SF
+/#copies 1 def
+/d_page_w 520 def
+/d_page_h 747 def
+/d_header_x 0 def
+/d_header_y 747 def
+/d_header_w 520 def
+/d_header_h 0 def
+/d_footer_x 0 def
+/d_footer_y 0 def
+/d_footer_w 520 def
+/d_footer_h 0 def
+/d_output_w 520 def
+/d_output_h 747 def
+/cols 1 def
+userdict/PStoPSxform PStoPSmatrix matrix currentmatrix
+ matrix invertmatrix matrix concatmatrix
+ matrix invertmatrix put
+%%EndSetup
+%%Page: (0,1) 1
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 1 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 701 M
+(Secure Shell Working Group                                  J. Galbraith) s
+5 690 M
+(Internet-Draft                                          VanDyke Software) s
+5 679 M
+(Expires: April 16, 2003                                        T. Ylonen) s
+5 668 M
+(                                                             S. Lehtinen) s
+5 657 M
+(                                        SSH Communications Security Corp) s
+5 646 M
+(                                                        October 16, 2002) s
+5 613 M
+(                       SSH File Transfer Protocol) s
+5 602 M
+(                    draft-ietf-secsh-filexfer-03.txt) s
+5 580 M
+(Status of this Memo) s
+5 558 M
+(   This document is an Internet-Draft and is in full conformance with) s
+5 547 M
+(   all provisions of Section 10 of RFC2026.) s
+5 525 M
+(   Internet-Drafts are working documents of the Internet Engineering) s
+5 514 M
+(   Task Force \(IETF\), its areas, and its working groups.  Note that) s
+5 503 M
+(   other groups may also distribute working documents as Internet-) s
+5 492 M
+(   Drafts.) s
+5 470 M
+(   Internet-Drafts are draft documents valid for a maximum of six months) s
+5 459 M
+(   and may be updated, replaced, or obsoleted by other documents at any) s
+5 448 M
+(   time.  It is inappropriate to use Internet-Drafts as reference) s
+5 437 M
+(   material or to cite them other than as "work in progress.") s
+5 415 M
+(   The list of current Internet-Drafts can be accessed at http://) s
+5 404 M
+(   www.ietf.org/ietf/1id-abstracts.txt.) s
+5 382 M
+(   The list of Internet-Draft Shadow Directories can be accessed at) s
+5 371 M
+(   http://www.ietf.org/shadow.html.) s
+5 349 M
+(   This Internet-Draft will expire on April 16, 2003.) s
+5 327 M
+(Copyright Notice) s
+5 305 M
+(   Copyright \(C\) The Internet Society \(2002\).  All Rights Reserved.) s
+5 283 M
+(Abstract) s
+5 261 M
+(   The SSH File Transfer Protocol provides secure file transfer) s
+5 250 M
+(   functionality over any reliable data stream.  It is the standard file) s
+5 239 M
+(   transfer protocol for use with the SSH2 protocol.  This document) s
+5 228 M
+(   describes the file transfer protocol and its interface to the SSH2) s
+5 217 M
+(   protocol suite.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                 [Page 1]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 2 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(Table of Contents) s
+5 668 M
+(   1.     Introduction . . . . . . . . . . . . . . . . . . . . . . .   3) s
+5 657 M
+(   2.     Use with the SSH Connection Protocol . . . . . . . . . . .   4) s
+5 646 M
+(   3.     General Packet Format  . . . . . . . . . . . . . . . . . .   5) s
+5 635 M
+(   4.     Protocol Initialization  . . . . . . . . . . . . . . . . .   7) s
+5 624 M
+(   4.1    Client Initialization  . . . . . . . . . . . . . . . . . .   7) s
+5 613 M
+(   4.2    Server Initialization  . . . . . . . . . . . . . . . . . .   7) s
+5 602 M
+(   4.3    Determining Server Newline Convention  . . . . . . . . . .   8) s
+5 591 M
+(   5.     File Attributes  . . . . . . . . . . . . . . . . . . . . .   9) s
+5 580 M
+(   5.1    Flags  . . . . . . . . . . . . . . . . . . . . . . . . . .   9) s
+5 569 M
+(   5.2    Type . . . . . . . . . . . . . . . . . . . . . . . . . . .  10) s
+5 558 M
+(   5.3    Size . . . . . . . . . . . . . . . . . . . . . . . . . . .  10) s
+5 547 M
+(   5.4    Owner and Group  . . . . . . . . . . . . . . . . . . . . .  10) s
+5 536 M
+(   5.5    Permissions  . . . . . . . . . . . . . . . . . . . . . . .  11) s
+5 525 M
+(   5.6    Times  . . . . . . . . . . . . . . . . . . . . . . . . . .  11) s
+5 514 M
+(   5.7    ACL  . . . . . . . . . . . . . . . . . . . . . . . . . . .  11) s
+5 503 M
+(   5.8    Extended attributes  . . . . . . . . . . . . . . . . . . .  12) s
+5 492 M
+(   6.     Requests From the Client to the Server . . . . . . . . . .  13) s
+5 481 M
+(   6.1    Request Synchronization and Reordering . . . . . . . . . .  13) s
+5 470 M
+(   6.2    File Names . . . . . . . . . . . . . . . . . . . . . . . .  14) s
+5 459 M
+(   6.3    Opening, Creating, and Closing Files . . . . . . . . . . .  14) s
+5 448 M
+(   6.4    Reading and Writing  . . . . . . . . . . . . . . . . . . .  17) s
+5 437 M
+(   6.5    Removing and Renaming Files  . . . . . . . . . . . . . . .  18) s
+5 426 M
+(   6.6    Creating and Deleting Directories  . . . . . . . . . . . .  19) s
+5 415 M
+(   6.7    Scanning Directories . . . . . . . . . . . . . . . . . . .  19) s
+5 404 M
+(   6.8    Retrieving File Attributes . . . . . . . . . . . . . . . .  20) s
+5 393 M
+(   6.9    Setting File Attributes  . . . . . . . . . . . . . . . . .  21) s
+5 382 M
+(   6.10   Dealing with Symbolic links  . . . . . . . . . . . . . . .  22) s
+5 371 M
+(   6.11   Canonicalizing the Server-Side Path Name . . . . . . . . .  23) s
+5 360 M
+(   6.11.1 Best practice for dealing with paths . . . . . . . . . . .  23) s
+5 349 M
+(   7.     Responses from the Server to the Client  . . . . . . . . .  24) s
+5 338 M
+(   8.     Vendor-Specific Extensions . . . . . . . . . . . . . . . .  28) s
+5 327 M
+(   9.     Security Considerations  . . . . . . . . . . . . . . . . .  29) s
+5 316 M
+(   10.    Changes from previous protocol versions  . . . . . . . . .  30) s
+5 305 M
+(   10.1   Changes between versions 4 and 3 . . . . . . . . . . . . .  30) s
+5 294 M
+(   10.2   Changes between versions 3 and 2 . . . . . . . . . . . . .  31) s
+5 283 M
+(   10.3   Changes between versions 2 and 1 . . . . . . . . . . . . .  31) s
+5 272 M
+(   10.4   Changes between versions 1 and 0 . . . . . . . . . . . . .  31) s
+5 261 M
+(   11.    Trademark Issues . . . . . . . . . . . . . . . . . . . . .  32) s
+5 250 M
+(          References . . . . . . . . . . . . . . . . . . . . . . . .  33) s
+5 239 M
+(          Authors' Addresses . . . . . . . . . . . . . . . . . . . .  33) s
+5 228 M
+(          Full Copyright Statement . . . . . . . . . . . . . . . . .  35) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                 [Page 2]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (2,3) 2
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 3 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(1. Introduction) s
+5 668 M
+(   This protocol provides secure file transfer \(and more generally file) s
+5 657 M
+(   system access\) functionality over a reliable data stream, such as a) s
+5 646 M
+(   channel in the SSH2 protocol [5].) s
+5 624 M
+(   This protocol is designed so that it could be used to implement a) s
+5 613 M
+(   secure remote file system service, as well as a secure file transfer) s
+5 602 M
+(   service.) s
+5 580 M
+(   This protocol assumes that it runs over a secure channel, and that) s
+5 569 M
+(   the server has already authenticated the user at the client end, and) s
+5 558 M
+(   that the identity of the client user is externally available to the) s
+5 547 M
+(   server implementation.) s
+5 525 M
+(   In general, this protocol follows a simple request-response model.) s
+5 514 M
+(   Each request and response contains a sequence number and multiple) s
+5 503 M
+(   requests may be pending simultaneously.  There are a relatively large) s
+5 492 M
+(   number of different request messages, but a small number of possible) s
+5 481 M
+(   response messages.  Each request has one or more response messages) s
+5 470 M
+(   that may be returned in result \(e.g., a read either returns data or) s
+5 459 M
+(   reports error status\).) s
+5 437 M
+(   The packet format descriptions in this specification follow the) s
+5 426 M
+(   notation presented in the secsh architecture draft. [5]) s
+5 404 M
+(   Even though this protocol is described in the context of the SSH2) s
+5 393 M
+(   protocol, this protocol is general and independent of the rest of the) s
+5 382 M
+(   SSH2 protocol suite.  It could be used in a number of different) s
+5 371 M
+(   applications, such as secure file transfer over TLS RFC 2246 [1] and) s
+5 360 M
+(   transfer of management information in VPN applications.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                 [Page 3]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 4 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(2. Use with the SSH Connection Protocol) s
+5 668 M
+(   When used with the SSH2 Protocol suite, this protocol is intended to) s
+5 657 M
+(   be used from the SSH Connection Protocol [7] as a subsystem, as) s
+5 646 M
+(   described in section ``Starting a Shell or a Command''.  The) s
+5 635 M
+(   subsystem name used with this protocol is "sftp".) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                 [Page 4]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (4,5) 3
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 5 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(3. General Packet Format) s
+5 668 M
+(   All packets transmitted over the secure connection are of the) s
+5 657 M
+(   following format:) s
+5 635 M
+(        uint32             length) s
+5 624 M
+(        byte               type) s
+5 613 M
+(        byte[length - 1]   data payload) s
+5 591 M
+(   That is, they are just data preceded by 32-bit length and 8-bit type) s
+5 580 M
+(   fields.  The `length' is the length of the data area, and does not) s
+5 569 M
+(   include the `length' field itself.  The format and interpretation of) s
+5 558 M
+(   the data area depends on the packet type.) s
+5 536 M
+(   All packet descriptions below only specify the packet type and the) s
+5 525 M
+(   data that goes into the data field.  Thus, they should be prefixed by) s
+5 514 M
+(   the `length' and `type' fields.) s
+5 492 M
+(   The maximum size of a packet is in practice determined by the client) s
+5 481 M
+(   \(the maximum size of read or write requests that it sends, plus a few) s
+5 470 M
+(   bytes of packet overhead\).  All servers SHOULD support packets of at) s
+5 459 M
+(   least 34000 bytes \(where the packet size refers to the full length,) s
+5 448 M
+(   including the header above\).  This should allow for reads and writes) s
+5 437 M
+(   of at most 32768 bytes.) s
+5 415 M
+(   There is no limit on the number of outstanding \(non-acknowledged\)) s
+5 404 M
+(   requests that the client may send to the server.  In practice this is) s
+5 393 M
+(   limited by the buffering available on the data stream and the queuing) s
+5 382 M
+(   performed by the server.  If the server's queues are full, it should) s
+5 371 M
+(   not read any more data from the stream, and flow control will prevent) s
+5 360 M
+(   the client from sending more requests.  Note, however, that while) s
+5 349 M
+(   there is no restriction on the protocol level, the client's API may) s
+5 338 M
+(   provide a limit in order to prevent infinite queuing of outgoing) s
+5 327 M
+(   requests at the client.) s
+5 305 M
+(   The following values are defined for packet types.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                 [Page 5]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 6 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(        #define SSH_FXP_INIT                1) s
+5 679 M
+(        #define SSH_FXP_VERSION             2) s
+5 668 M
+(        #define SSH_FXP_OPEN                3) s
+5 657 M
+(        #define SSH_FXP_CLOSE               4) s
+5 646 M
+(        #define SSH_FXP_READ                5) s
+5 635 M
+(        #define SSH_FXP_WRITE               6) s
+5 624 M
+(        #define SSH_FXP_LSTAT               7) s
+5 613 M
+(        #define SSH_FXP_FSTAT               8) s
+5 602 M
+(        #define SSH_FXP_SETSTAT             9) s
+5 591 M
+(        #define SSH_FXP_FSETSTAT           10) s
+5 580 M
+(        #define SSH_FXP_OPENDIR            11) s
+5 569 M
+(        #define SSH_FXP_READDIR            12) s
+5 558 M
+(        #define SSH_FXP_REMOVE             13) s
+5 547 M
+(        #define SSH_FXP_MKDIR              14) s
+5 536 M
+(        #define SSH_FXP_RMDIR              15) s
+5 525 M
+(        #define SSH_FXP_REALPATH           16) s
+5 514 M
+(        #define SSH_FXP_STAT               17) s
+5 503 M
+(        #define SSH_FXP_RENAME             18) s
+5 492 M
+(        #define SSH_FXP_READLINK           19) s
+5 481 M
+(        #define SSH_FXP_SYMLINK            20) s
+5 459 M
+(        #define SSH_FXP_STATUS            101) s
+5 448 M
+(        #define SSH_FXP_HANDLE            102) s
+5 437 M
+(        #define SSH_FXP_DATA              103) s
+5 426 M
+(        #define SSH_FXP_NAME              104) s
+5 415 M
+(        #define SSH_FXP_ATTRS             105) s
+5 393 M
+(        #define SSH_FXP_EXTENDED          200) s
+5 382 M
+(        #define SSH_FXP_EXTENDED_REPLY    201) s
+5 360 M
+(        RESERVED_FOR_EXTENSIONS            210-255) s
+5 338 M
+(   Additional packet types should only be defined if the protocol) s
+5 327 M
+(   version number \(see Section ``Protocol Initialization''\) is) s
+5 316 M
+(   incremented, and their use MUST be negotiated using the version) s
+5 305 M
+(   number.  However, the SSH_FXP_EXTENDED and SSH_FXP_EXTENDED_REPLY) s
+5 294 M
+(   packets can be used to implement vendor-specific extensions.  See) s
+5 283 M
+(   Section ``Vendor-Specific-Extensions'' for more details.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                 [Page 6]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (6,7) 4
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 7 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(4. Protocol Initialization) s
+5 668 M
+(   When the file transfer protocol starts, the client first sends a) s
+5 657 M
+(   SSH_FXP_INIT \(including its version number\) packet to the server.) s
+5 646 M
+(   The server responds with a SSH_FXP_VERSION packet, supplying the) s
+5 635 M
+(   lowest of its own and the client's version number.  Both parties) s
+5 624 M
+(   should from then on adhere to particular version of the protocol.) s
+5 602 M
+(   The version number of the protocol specified in this document is 4.) s
+5 591 M
+(   The version number should be incremented for each incompatible) s
+5 580 M
+(   revision of this protocol.) s
+5 558 M
+(4.1 Client Initialization) s
+5 536 M
+(   The SSH_FXP_INIT packet \(from client to server\) has the following) s
+5 525 M
+(   data:) s
+5 503 M
+(                uint32 version) s
+5 481 M
+(   Version 3 of this protocol allowed clients to include extensions in) s
+5 470 M
+(   the SSH_FXP_INIT packet; however, this can cause interoperability) s
+5 459 M
+(   problems with version 1 and version 2 servers because the client must) s
+5 448 M
+(   send this packet before knowing the servers version.) s
+5 426 M
+(   In this version of the protocol, clients MUST use the) s
+5 415 M
+(   SSH_FXP_EXTENDED packet to send extensions to the server after) s
+5 404 M
+(   version exchange has completed.  Clients MUST NOT include extensions) s
+5 393 M
+(   in the version packet.  This will prevent interoperability problems) s
+5 382 M
+(   with older servers) s
+5 360 M
+(4.2 Server Initialization) s
+5 338 M
+(   The SSH_FXP_VERSION packet \(from server to client\) has the following) s
+5 327 M
+(   data:) s
+5 305 M
+(                uint32 version) s
+5 294 M
+(                <extension data>) s
+5 272 M
+(   'version' is the lower of the protocol version supported by the) s
+5 261 M
+(   server and the version number received from the client.) s
+5 239 M
+(   The extension data may be empty, or may be a sequence of) s
+5 217 M
+(                string extension_name) s
+5 206 M
+(                string extension_data) s
+5 184 M
+(   pairs \(both strings MUST always be present if one is, but the) s
+5 173 M
+(   `extension_data' string may be of zero length\).  If present, these) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                 [Page 7]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 8 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   strings indicate extensions to the baseline protocol.  The) s
+5 679 M
+(   `extension_name' field\(s\) identify the name of the extension.  The) s
+5 668 M
+(   name should be of the form "name@domain", where the domain is the DNS) s
+5 657 M
+(   domain name of the organization defining the extension.  Additional) s
+5 646 M
+(   names that are not of this format may be defined later by the IETF.) s
+5 635 M
+(   Implementations MUST silently ignore any extensions whose name they) s
+5 624 M
+(   do not recognize.) s
+5 602 M
+(4.3 Determining Server Newline Convention) s
+5 580 M
+(   In order to correctly process text files in a cross platform) s
+5 569 M
+(   compatible way, the newline convention must be converted from that of) s
+5 558 M
+(   the server to that of the client, or, during an upload, from that of) s
+5 547 M
+(   the client to that of the server.) s
+5 525 M
+(   Versions 3 and prior of this protocol made no provisions for) s
+5 514 M
+(   processing text files.  Many clients implemented some sort of) s
+5 503 M
+(   conversion algorithm, but without either a 'canonical' on the wire) s
+5 492 M
+(   format or knowledge of the servers newline convention, correct) s
+5 481 M
+(   conversion was not always possible.) s
+5 459 M
+(   Starting with Version 4, the SSH_FXF_TEXT file open flag \(Section) s
+5 448 M
+(   6.3\) makes it possible to request that the server translate a file to) s
+5 437 M
+(   a 'canonical' on the wire format.  This format uses \\r\\n as the line) s
+5 426 M
+(   separator.) s
+5 404 M
+(   Servers for systems using multiple newline characters \(for example,) s
+5 393 M
+(   Mac OS X or VMS\) or systems using counted records, MUST translate to) s
+5 382 M
+(   the canonical form.) s
+5 360 M
+(   However, to ease the burden of implementation on servers that use a) s
+5 349 M
+(   single, simple separator sequence, the following extension allows the) s
+5 338 M
+(   canonical format to be changed.) s
+5 316 M
+(        string "newline") s
+5 305 M
+(        string new-canonical-separator \(usually "\\r" or "\\n" or "\\r\\n"\)) s
+5 283 M
+(   All clients MUST support this extension.) s
+5 261 M
+(   When processing text files, clients SHOULD NOT translate any) s
+5 250 M
+(   character or sequence that is not an exact match of the servers) s
+5 239 M
+(   newline separator.) s
+5 217 M
+(   In particular, if the newline sequence being used is the canonical) s
+5 206 M
+(   "\\r\\n" sequence, a lone \\r or a lone \\n SHOULD be written through) s
+5 195 M
+(   without change.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                 [Page 8]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (8,9) 5
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 9 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(5. File Attributes) s
+5 668 M
+(   A new compound data type is defined for encoding file attributes.) s
+5 657 M
+(   The same encoding is used both when returning file attributes from) s
+5 646 M
+(   the server and when sending file attributes to the server.  When) s
+5 635 M
+(   sending it to the server, the flags field specifies which attributes) s
+5 624 M
+(   are included, and the server will use default values for the) s
+5 613 M
+(   remaining attributes \(or will not modify the values of remaining) s
+5 602 M
+(   attributes\).  When receiving attributes from the server, the flags) s
+5 591 M
+(   specify which attributes are included in the returned data.  The) s
+5 580 M
+(   server normally returns all attributes it knows about.) s
+5 558 M
+(        uint32   flags) s
+5 547 M
+(        byte     type           always present) s
+5 536 M
+(        uint64   size           present only if flag SSH_FILEXFER_ATTR_SIZE) s
+5 525 M
+(        string   owner          present only if flag SSH_FILEXFER_ATTR_OWNERGROUP) s
+5 514 M
+(        string   group          present only if flag SSH_FILEXFER_ATTR_OWNERGROUP) s
+5 503 M
+(        uint32   permissions    present only if flag SSH_FILEXFER_ATTR_PERMISSIONS) s
+5 492 M
+(        uint32   atime          present only if flag SSH_FILEXFER_ATTR_ACCESSTIME) s
+5 481 M
+(        uint32   createtime     present only if flag SSH_FILEXFER_ATTR_CREATETIME) s
+5 470 M
+(        uint32   mtime          present only if flag SSH_FILEXFER_ATTR_MODIFYTIME) s
+5 459 M
+(        string   acl            present only if flag SSH_FILEXFER_ATTR_ACL) s
+5 448 M
+(        uint32   extended_count present only if flag SSH_FILEXFER_ATTR_EXTENDED) s
+5 437 M
+(        string   extended_type) s
+5 426 M
+(        string   extended_data) s
+5 415 M
+(        ...      more extended data \(extended_type - extended_data pairs\),) s
+5 404 M
+(                   so that number of pairs equals extended_count) s
+5 371 M
+(5.1 Flags) s
+5 349 M
+(   The `flags' specify which of the fields are present.  Those fields) s
+5 338 M
+(   for which the corresponding flag is not set are not present \(not) s
+5 327 M
+(   included in the packet\).  New flags can only be added by incrementing) s
+5 316 M
+(   the protocol version number \(or by using the extension mechanism) s
+5 305 M
+(   described below\).) s
+5 283 M
+(   The flags bits are defined to have the following values:) s
+5 261 M
+(        #define SSH_FILEXFER_ATTR_SIZE            0x00000001) s
+5 250 M
+(        #define SSH_FILEXFER_ATTR_PERMISSIONS     0x00000004) s
+5 239 M
+(        #define SSH_FILEXFER_ATTR_ACCESSTIME      0x00000008) s
+5 228 M
+(        #define SSH_FILEXFER_ATTR_CREATETIME      0x00000010) s
+5 217 M
+(        #define SSH_FILEXFER_ATTR_MODIFYTIME      0x00000020) s
+5 206 M
+(        #define SSH_FILEXFER_ATTR_ACL             0x00000040) s
+5 195 M
+(        #define SSH_FILEXFER_ATTR_OWNERGROUP      0x00000080) s
+5 184 M
+(        #define SSH_FILEXFER_ATTR_EXTENDED        0x80000000) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                 [Page 9]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 10 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   In previous versions of this protocol flags value 0x00000002 was) s
+5 679 M
+(   SSH_FILEXFER_ATTR_UIDGID.  This value is now unused, and OWNERGROUP) s
+5 668 M
+(   was given a new value in order to ease implementation burden.) s
+5 657 M
+(   0x00000002 MUST NOT appear in the mask.  Some future version of this) s
+5 646 M
+(   protocol may reuse flag 0x00000002.) s
+5 624 M
+(5.2 Type) s
+5 602 M
+(   The type field is always present.  The following types are defined:) s
+5 580 M
+(        #define SSH_FILEXFER_TYPE_REGULAR          1) s
+5 569 M
+(        #define SSH_FILEXFER_TYPE_DIRECTORY        2) s
+5 558 M
+(        #define SSH_FILEXFER_TYPE_SYMLINK          3) s
+5 547 M
+(        #define SSH_FILEXFER_TYPE_SPECIAL          4) s
+5 536 M
+(        #define SSH_FILEXFER_TYPE_UNKNOWN          5) s
+5 514 M
+(   On a POSIX system, these values would be derived from the permission) s
+5 503 M
+(   field.) s
+5 481 M
+(5.3 Size) s
+5 459 M
+(   The `size' field specifies the size of the file on disk, in bytes.) s
+5 448 M
+(   If it is present during file creation, it should be considered a hint) s
+5 437 M
+(   as to the files eventual size.) s
+5 415 M
+(   Files opened with the SSH_FXF_TEXT flag may have a size that is) s
+5 404 M
+(   greater or less than the value of the size field.) s
+5 382 M
+(5.4 Owner and Group) s
+5 360 M
+(   The `owner' and `group' fields are represented as UTF-8 strings; this) s
+5 349 M
+(   is the form used by NFS v4.  See NFS version 4 Protocol.  [3] The) s
+5 338 M
+(   following text is selected quotations from section 5.6.) s
+5 316 M
+(   To avoid a representation that is tied to a particular underlying) s
+5 305 M
+(   implementation at the client or server, the use of UTF-8 strings has) s
+5 294 M
+(   been chosen.  The string should be of the form user@dns_domain".) s
+5 283 M
+(   This will allow for a client and server that do not use the same) s
+5 272 M
+(   local representation the ability to translate to a common syntax that) s
+5 261 M
+(   can be interpreted by both.  In the case where there is no) s
+5 250 M
+(   translation available to the client or server, the attribute value) s
+5 239 M
+(   must be constructed without the "@".  Therefore, the absence of the @) s
+5 228 M
+(   from the owner or owner_group attribute signifies that no translation) s
+5 217 M
+(   was available and the receiver of the attribute should not place any) s
+5 206 M
+(   special meaning with the attribute value.  Even though the attribute) s
+5 195 M
+(   value can not be translated, it may still be useful.  In the case of) s
+5 184 M
+(   a client, the attribute string may be used for local display of) s
+5 173 M
+(   ownership.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 10]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (10,11) 6
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 11 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(5.5 Permissions) s
+5 668 M
+(   The `permissions' field contains a bit mask of file permissions as) s
+5 657 M
+(   defined by POSIX [1].) s
+5 635 M
+(5.6 Times) s
+5 613 M
+(   The 'atime', 'createtime', and 'mtime' contain the access, creation,) s
+5 602 M
+(   and modification times of the files, respectively.  They are) s
+5 591 M
+(   represented as seconds from Jan 1, 1970 in UTC.) s
+5 569 M
+(5.7 ACL) s
+5 547 M
+(   The 'ACL' field contains an ACL similar to that defined in section) s
+5 536 M
+(   5.9 of NFS version 4 Protocol [3].) s
+5 514 M
+(           uint32   ace-count) s
+5 492 M
+(           repeated ace-count time:) s
+5 481 M
+(                uint32   ace-type) s
+5 470 M
+(                uint32   ace-flag) s
+5 459 M
+(                uint32   ace-mask) s
+5 448 M
+(                string   who [UTF-8]) s
+5 426 M
+(   ace-type is one of the following four values \(taken from NFS Version) s
+5 415 M
+(   4 Protocol [3]:) s
+5 393 M
+(        const ACE4_ACCESS_ALLOWED_ACE_TYPE      = 0x00000000;) s
+5 382 M
+(        const ACE4_ACCESS_DENIED_ACE_TYPE       = 0x00000001;) s
+5 371 M
+(        const ACE4_SYSTEM_AUDIT_ACE_TYPE        = 0x00000002;) s
+5 360 M
+(        const ACE4_SYSTEM_ALARM_ACE_TYPE        = 0x00000003;) s
+5 338 M
+(   ace-flag is a combination of the following flag values.  See NFS) s
+5 327 M
+(   Version 4 Protocol [3] section 5.9.2:) s
+5 305 M
+(        const ACE4_FILE_INHERIT_ACE             = 0x00000001;) s
+5 294 M
+(        const ACE4_DIRECTORY_INHERIT_ACE        = 0x00000002;) s
+5 283 M
+(        const ACE4_NO_PROPAGATE_INHERIT_ACE     = 0x00000004;) s
+5 272 M
+(        const ACE4_INHERIT_ONLY_ACE             = 0x00000008;) s
+5 261 M
+(        const ACE4_SUCCESSFUL_ACCESS_ACE_FLAG   = 0x00000010;) s
+5 250 M
+(        const ACE4_FAILED_ACCESS_ACE_FLAG       = 0x00000020;) s
+5 239 M
+(        const ACE4_IDENTIFIER_GROUP             = 0x00000040;) s
+5 217 M
+(   ace-mask is any combination of the following flags \(taken from NFS) s
+5 206 M
+(   Version 4 Protocol [3] section 5.9.3:) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 11]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 12 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(        const ACE4_READ_DATA            = 0x00000001;) s
+5 679 M
+(        const ACE4_LIST_DIRECTORY       = 0x00000001;) s
+5 668 M
+(        const ACE4_WRITE_DATA           = 0x00000002;) s
+5 657 M
+(        const ACE4_ADD_FILE             = 0x00000002;) s
+5 646 M
+(        const ACE4_APPEND_DATA          = 0x00000004;) s
+5 635 M
+(        const ACE4_ADD_SUBDIRECTORY     = 0x00000004;) s
+5 624 M
+(        const ACE4_READ_NAMED_ATTRS     = 0x00000008;) s
+5 613 M
+(        const ACE4_WRITE_NAMED_ATTRS    = 0x00000010;) s
+5 602 M
+(        const ACE4_EXECUTE              = 0x00000020;) s
+5 591 M
+(        const ACE4_DELETE_CHILD         = 0x00000040;) s
+5 580 M
+(        const ACE4_READ_ATTRIBUTES      = 0x00000080;) s
+5 569 M
+(        const ACE4_WRITE_ATTRIBUTES     = 0x00000100;) s
+5 558 M
+(        const ACE4_DELETE               = 0x00010000;) s
+5 547 M
+(        const ACE4_READ_ACL             = 0x00020000;) s
+5 536 M
+(        const ACE4_WRITE_ACL            = 0x00040000;) s
+5 525 M
+(        const ACE4_WRITE_OWNER          = 0x00080000;) s
+5 514 M
+(        const ACE4_SYNCHRONIZE          = 0x00100000;) s
+5 492 M
+(   who is a UTF-8 string of the form described in 'Owner and Group') s
+5 481 M
+(   \(Section 5.4\)) s
+5 459 M
+(5.8 Extended attributes) s
+5 437 M
+(   The SSH_FILEXFER_ATTR_EXTENDED flag provides a general extension) s
+5 426 M
+(   mechanism for vendor-specific extensions.  If the flag is specified,) s
+5 415 M
+(   then the `extended_count' field is present.  It specifies the number) s
+5 404 M
+(   of extended_type-extended_data pairs that follow.  Each of these) s
+5 393 M
+(   pairs specifies an extended attribute.  For each of the attributes,) s
+5 382 M
+(   the extended_type field should be a string of the format) s
+5 371 M
+(   "name@domain", where "domain" is a valid, registered domain name and) s
+5 360 M
+(   "name" identifies the method.  The IETF may later standardize certain) s
+5 349 M
+(   names that deviate from this format \(e.g., that do not contain the) s
+5 338 M
+(   "@" sign\).  The interpretation of `extended_data' depends on the) s
+5 327 M
+(   type.  Implementations SHOULD ignore extended data fields that they) s
+5 316 M
+(   do not understand.) s
+5 294 M
+(   Additional fields can be added to the attributes by either defining) s
+5 283 M
+(   additional bits to the flags field to indicate their presence, or by) s
+5 272 M
+(   defining extended attributes for them.  The extended attributes) s
+5 261 M
+(   mechanism is recommended for most purposes; additional flags bits) s
+5 250 M
+(   should only be defined by an IETF standards action that also) s
+5 239 M
+(   increments the protocol version number.  The use of such new fields) s
+5 228 M
+(   MUST be negotiated by the version number in the protocol exchange.) s
+5 217 M
+(   It is a protocol error if a packet with unsupported protocol bits is) s
+5 206 M
+(   received.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 12]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (12,13) 7
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 13 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(6. Requests From the Client to the Server) s
+5 668 M
+(   Requests from the client to the server represent the various file) s
+5 657 M
+(   system operations.  Each request begins with an `id' field, which is) s
+5 646 M
+(   a 32-bit identifier identifying the request \(selected by the client\).) s
+5 635 M
+(   The same identifier will be returned in the response to the request.) s
+5 624 M
+(   One possible implementation is a monotonically increasing request) s
+5 613 M
+(   sequence number \(modulo 2^32\).) s
+5 591 M
+(   Many operations in the protocol operate on open files.  The) s
+5 580 M
+(   SSH_FXP_OPEN request can return a file handle \(which is an opaque) s
+5 569 M
+(   variable-length string\) which may be used to access the file later) s
+5 558 M
+(   \(e.g.  in a read operation\).  The client MUST NOT send requests the) s
+5 547 M
+(   server with bogus or closed handles.  However, the server MUST) s
+5 536 M
+(   perform adequate checks on the handle in order to avoid security) s
+5 525 M
+(   risks due to fabricated handles.) s
+5 503 M
+(   This design allows either stateful and stateless server) s
+5 492 M
+(   implementation, as well as an implementation which caches state) s
+5 481 M
+(   between requests but may also flush it.  The contents of the file) s
+5 470 M
+(   handle string are entirely up to the server and its design.  The) s
+5 459 M
+(   client should not modify or attempt to interpret the file handle) s
+5 448 M
+(   strings.) s
+5 426 M
+(   The file handle strings MUST NOT be longer than 256 bytes.) s
+5 404 M
+(6.1 Request Synchronization and Reordering) s
+5 382 M
+(   The protocol and implementations MUST process requests relating to) s
+5 371 M
+(   the same file in the order in which they are received.  In other) s
+5 360 M
+(   words, if an application submits multiple requests to the server, the) s
+5 349 M
+(   results in the responses will be the same as if it had sent the) s
+5 338 M
+(   requests one at a time and waited for the response in each case.  For) s
+5 327 M
+(   example, the server may process non-overlapping read/write requests) s
+5 316 M
+(   to the same file in parallel, but overlapping reads and writes cannot) s
+5 305 M
+(   be reordered or parallelized.  However, there are no ordering) s
+5 294 M
+(   restrictions on the server for processing requests from two different) s
+5 283 M
+(   file transfer connections.  The server may interleave and parallelize) s
+5 272 M
+(   them at will.) s
+5 250 M
+(   There are no restrictions on the order in which responses to) s
+5 239 M
+(   outstanding requests are delivered to the client, except that the) s
+5 228 M
+(   server must ensure fairness in the sense that processing of no) s
+5 217 M
+(   request will be indefinitely delayed even if the client is sending) s
+5 206 M
+(   other requests so that there are multiple outstanding requests all) s
+5 195 M
+(   the time.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 13]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 14 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(6.2 File Names) s
+5 668 M
+(   This protocol represents file names as strings.  File names are) s
+5 657 M
+(   assumed to use the slash \('/'\) character as a directory separator.) s
+5 635 M
+(   File names starting with a slash are "absolute", and are relative to) s
+5 624 M
+(   the root of the file system.  Names starting with any other character) s
+5 613 M
+(   are relative to the user's default directory \(home directory\).  Note) s
+5 602 M
+(   that identifying the user is assumed to take place outside of this) s
+5 591 M
+(   protocol.) s
+5 569 M
+(   Servers SHOULD interpret a path name component ".." as referring to) s
+5 558 M
+(   the parent directory, and "." as referring to the current directory.) s
+5 547 M
+(   If the server implementation limits access to certain parts of the) s
+5 536 M
+(   file system, it must be extra careful in parsing file names when) s
+5 525 M
+(   enforcing such restrictions.  There have been numerous reported) s
+5 514 M
+(   security bugs where a ".." in a path name has allowed access outside) s
+5 503 M
+(   the intended area.) s
+5 481 M
+(   An empty path name is valid, and it refers to the user's default) s
+5 470 M
+(   directory \(usually the user's home directory\).) s
+5 448 M
+(   Otherwise, no syntax is defined for file names by this specification.) s
+5 437 M
+(   Clients should not make any other assumptions; however, they can) s
+5 426 M
+(   splice path name components returned by SSH_FXP_READDIR together) s
+5 415 M
+(   using a slash \('/'\) as the separator, and that will work as expected.) s
+5 393 M
+(   In order to comply with IETF Policy on Character Sets and Languages) s
+5 382 M
+(   [2], all filenames are to be encoded in UTF-8.  The shortest valid) s
+5 371 M
+(   UTF-8 encoding of the UNICODE data MUST be used.  The server is) s
+5 360 M
+(   responsible for converting the UNICODE data to whatever canonical) s
+5 349 M
+(   form it requires.) s
+5 327 M
+(   For example, if the server requires that precomposed characters) s
+5 316 M
+(   always be used, the server MUST NOT assume the filename as sent by) s
+5 305 M
+(   the client has this attribute, but must do this normalization itself.) s
+5 283 M
+(   It is understood that the lack of well-defined semantics for file) s
+5 272 M
+(   names may cause interoperability problems between clients and servers) s
+5 261 M
+(   using radically different operating systems.  However, this approach) s
+5 250 M
+(   is known to work acceptably with most systems, and alternative) s
+5 239 M
+(   approaches that e.g.  treat file names as sequences of structured) s
+5 228 M
+(   components are quite complicated.) s
+5 206 M
+(6.3 Opening, Creating, and Closing Files) s
+5 184 M
+(   Files are opened and created using the SSH_FXP_OPEN message, whose) s
+5 173 M
+(   data part is as follows:) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 14]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (14,15) 8
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 15 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(        uint32        id) s
+5 679 M
+(        string        filename [UTF-8]) s
+5 668 M
+(        uint32        pflags) s
+5 657 M
+(        ATTRS         attrs) s
+5 635 M
+(   The `id' field is the request identifier as for all requests.) s
+5 613 M
+(   The `filename' field specifies the file name.  See Section ``File) s
+5 602 M
+(   Names'' for more information.) s
+5 580 M
+(   The `pflags' field is a bitmask.  The following bits have been) s
+5 569 M
+(   defined.) s
+5 547 M
+(        #define SSH_FXF_READ            0x00000001) s
+5 536 M
+(        #define SSH_FXF_WRITE           0x00000002) s
+5 525 M
+(        #define SSH_FXF_APPEND          0x00000004) s
+5 514 M
+(        #define SSH_FXF_CREAT           0x00000008) s
+5 503 M
+(        #define SSH_FXF_TRUNC           0x00000010) s
+5 492 M
+(        #define SSH_FXF_EXCL            0x00000020) s
+5 481 M
+(        #define SSH_FXF_TEXT            0x00000040) s
+5 459 M
+(   These have the following meanings:) s
+5 437 M
+(   SSH_FXF_READ) s
+5 426 M
+(      Open the file for reading.) s
+5 404 M
+(   SSH_FXF_WRITE) s
+5 393 M
+(      Open the file for writing.  If both this and SSH_FXF_READ are) s
+5 382 M
+(      specified, the file is opened for both reading and writing.) s
+5 360 M
+(   SSH_FXF_APPEND) s
+5 349 M
+(      Force all writes to append data at the end of the file.  The) s
+5 338 M
+(      offset parameter to write will be ignored.) s
+5 316 M
+(   SSH_FXF_CREAT) s
+5 305 M
+(      If this flag is specified, then a new file will be created if one) s
+5 294 M
+(      does not already exist \(if O_TRUNC is specified, the new file will) s
+5 283 M
+(      be truncated to zero length if it previously exists\).) s
+5 261 M
+(   SSH_FXF_TRUNC) s
+5 250 M
+(      Forces an existing file with the same name to be truncated to zero) s
+5 239 M
+(      length when creating a file by specifying SSH_FXF_CREAT.) s
+5 228 M
+(      SSH_FXF_CREAT MUST also be specified if this flag is used.) s
+5 206 M
+(   SSH_FXF_EXCL) s
+5 195 M
+(      Causes the request to fail if the named file already exists.) s
+5 184 M
+(      SSH_FXF_CREAT MUST also be specified if this flag is used.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 15]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 16 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   SSH_FXF_TEXT) s
+5 679 M
+(      Indicates that the server should treat the file as text and) s
+5 668 M
+(      convert it to the canonical newline convention in use.  \(See) s
+5 657 M
+(      Determining Server Newline Convention. \(Section 4.3\)) s
+5 635 M
+(      When a file is opened with the FXF_TEXT flag, the offset field in) s
+5 624 M
+(      both the read and write function are ignored.) s
+5 602 M
+(      Servers MUST correctly process multiple parallel reads and writes) s
+5 591 M
+(      correctly in this mode.  Naturally, it is permissible for them to) s
+5 580 M
+(      do this by serializing the requests.  It would not be possible for) s
+5 569 M
+(      a client to reliably detect a server that does not implement) s
+5 558 M
+(      parallel writes in time to prevent damage.) s
+5 536 M
+(      Clients SHOULD use the SSH_FXF_APPEND flag to append data to a) s
+5 525 M
+(      text file rather then using write with a calculated offset.) s
+5 503 M
+(      To support seeks on text file the following SSH_FXP_EXTENDED) s
+5 492 M
+(      packet is defined.) s
+5 448 M
+(        string "text-seek") s
+5 437 M
+(        string file-handle) s
+5 426 M
+(        uint64 line-number) s
+5 404 M
+(      line-number is the index of the line number to seek to, where byte) s
+5 393 M
+(      0 in the file is line number 0, and the byte directly following) s
+5 382 M
+(      the first newline sequence in the file is line number 1 and so on.) s
+5 360 M
+(      The response to a "text-seek" request is an SSH_FXP_STATUS) s
+5 349 M
+(      message.) s
+5 327 M
+(      An attempt to seek past the end-of-file should result in a) s
+5 316 M
+(      SSH_FX_EOF status.) s
+5 294 M
+(      Servers SHOULD support at least one "text-seek" in order to) s
+5 283 M
+(      support resume.  However, a client MUST be prepared to receive) s
+5 272 M
+(      SSH_FX_OP_UNSUPPORTED when attempting a "text-seek" operation.) s
+5 261 M
+(      The client can then try a fall-back strategy, if it has one.) s
+5 239 M
+(      Clients MUST be prepared to handle SSH_FX_OP_UNSUPPORTED returned) s
+5 228 M
+(      for read or write operations that are not sequential.) s
+5 206 M
+(   The `attrs' field specifies the initial attributes for the file.) s
+5 195 M
+(   Default values will be used for those attributes that are not) s
+5 184 M
+(   specified.  See Section ``File Attributes'' for more information.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 16]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (16,17) 9
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 17 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   The response to this message will be either SSH_FXP_HANDLE \(if the) s
+5 679 M
+(   operation is successful\) or SSH_FXP_STATUS \(if the operation fails\).) s
+5 657 M
+(   A file is closed by using the SSH_FXP_CLOSE request.  Its data field) s
+5 646 M
+(   has the following format:) s
+5 624 M
+(        uint32     id) s
+5 613 M
+(        string     handle) s
+5 591 M
+(   where `id' is the request identifier, and `handle' is a handle) s
+5 580 M
+(   previously returned in the response to SSH_FXP_OPEN or) s
+5 569 M
+(   SSH_FXP_OPENDIR.  The handle becomes invalid immediately after this) s
+5 558 M
+(   request has been sent.) s
+5 536 M
+(   The response to this request will be a SSH_FXP_STATUS message.  One) s
+5 525 M
+(   should note that on some server platforms even a close can fail.) s
+5 514 M
+(   This can happen e.g.  if the server operating system caches writes,) s
+5 503 M
+(   and an error occurs while flushing cached writes during the close.) s
+5 481 M
+(6.4 Reading and Writing) s
+5 459 M
+(   Once a file has been opened, it can be read using the SSH_FXP_READ) s
+5 448 M
+(   message, which has the following format:) s
+5 426 M
+(        uint32     id) s
+5 415 M
+(        string     handle) s
+5 404 M
+(        uint64     offset) s
+5 393 M
+(        uint32     len) s
+5 371 M
+(   where `id' is the request identifier, `handle' is an open file handle) s
+5 360 M
+(   returned by SSH_FXP_OPEN, `offset' is the offset \(in bytes\) relative) s
+5 349 M
+(   to the beginning of the file from where to start reading, and `len') s
+5 338 M
+(   is the maximum number of bytes to read.) s
+5 316 M
+(   In response to this request, the server will read as many bytes as it) s
+5 305 M
+(   can from the file \(up to `len'\), and return them in a SSH_FXP_DATA) s
+5 294 M
+(   message.  If an error occurs or EOF is encountered before reading any) s
+5 283 M
+(   data, the server will respond with SSH_FXP_STATUS.  For normal disk) s
+5 272 M
+(   files, it is guaranteed that this will read the specified number of) s
+5 261 M
+(   bytes, or up to end of file.  For e.g.  device files this may return) s
+5 250 M
+(   fewer bytes than requested.) s
+5 228 M
+(   Writing to a file is achieved using the SSH_FXP_WRITE message, which) s
+5 217 M
+(   has the following format:) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 17]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 18 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(        uint32     id) s
+5 679 M
+(        string     handle) s
+5 668 M
+(        uint64     offset) s
+5 657 M
+(        string     data) s
+5 635 M
+(   where `id' is a request identifier, `handle' is a file handle) s
+5 624 M
+(   returned by SSH_FXP_OPEN, `offset' is the offset \(in bytes\) from the) s
+5 613 M
+(   beginning of the file where to start writing, and `data' is the data) s
+5 602 M
+(   to be written.) s
+5 580 M
+(   The write will extend the file if writing beyond the end of the file.) s
+5 569 M
+(   It is legal to write way beyond the end of the file; the semantics) s
+5 558 M
+(   are to write zeroes from the end of the file to the specified offset) s
+5 547 M
+(   and then the data.  On most operating systems, such writes do not) s
+5 536 M
+(   allocate disk space but instead leave "holes" in the file.) s
+5 514 M
+(   The server responds to a write request with a SSH_FXP_STATUS message.) s
+5 492 M
+(6.5 Removing and Renaming Files) s
+5 470 M
+(   Files can be removed using the SSH_FXP_REMOVE message.  It has the) s
+5 459 M
+(   following format:) s
+5 437 M
+(        uint32     id) s
+5 426 M
+(        string     filename [UTF-8]) s
+5 404 M
+(   where `id' is the request identifier and `filename' is the name of) s
+5 393 M
+(   the file to be removed.  See Section ``File Names'' for more) s
+5 382 M
+(   information.  This request cannot be used to remove directories.) s
+5 360 M
+(   The server will respond to this request with a SSH_FXP_STATUS) s
+5 349 M
+(   message.) s
+5 327 M
+(   Files \(and directories\) can be renamed using the SSH_FXP_RENAME) s
+5 316 M
+(   message.  Its data is as follows:) s
+5 294 M
+(        uint32     id) s
+5 283 M
+(        string     oldpath [UTF-8]) s
+5 272 M
+(        string     newpath [UTF-8]) s
+5 250 M
+(   where `id' is the request identifier, `oldpath' is the name of an) s
+5 239 M
+(   existing file or directory, and `newpath' is the new name for the) s
+5 228 M
+(   file or directory.  It is an error if there already exists a file) s
+5 217 M
+(   with the name specified by newpath.  The server may also fail rename) s
+5 206 M
+(   requests in other situations, for example if `oldpath' and `newpath') s
+5 195 M
+(   point to different file systems on the server.) s
+5 173 M
+(   The server will respond to this request with a SSH_FXP_STATUS) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 18]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (18,19) 10
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 19 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   message.) s
+5 668 M
+(6.6 Creating and Deleting Directories) s
+5 646 M
+(   New directories can be created using the SSH_FXP_MKDIR request.  It) s
+5 635 M
+(   has the following format:) s
+5 613 M
+(        uint32     id) s
+5 602 M
+(        string     path [UTF-8]) s
+5 591 M
+(        ATTRS      attrs) s
+5 569 M
+(   where `id' is the request identifier.) s
+5 547 M
+(   `path' specifies the directory to be created.  See Section ``File) s
+5 536 M
+(   Names'' for more information on file names.) s
+5 514 M
+(   `attrs' specifies the attributes that should be applied to it upon) s
+5 503 M
+(   creation.  Attributes are discussed in more detail in Section ``File) s
+5 492 M
+(   Attributes''.) s
+5 470 M
+(   The server will respond to this request with a SSH_FXP_STATUS) s
+5 459 M
+(   message.  If a file or directory with the specified path already) s
+5 448 M
+(   exists, an error will be returned.) s
+5 426 M
+(   Directories can be removed using the SSH_FXP_RMDIR request, which has) s
+5 415 M
+(   the following format:) s
+5 393 M
+(        uint32     id) s
+5 382 M
+(        string     path [UTF-8]) s
+5 360 M
+(   where `id' is the request identifier, and `path' specifies the) s
+5 349 M
+(   directory to be removed.  See Section ``File Names'' for more) s
+5 338 M
+(   information on file names.) s
+5 316 M
+(   The server responds to this request with a SSH_FXP_STATUS message.) s
+5 305 M
+(   Errors may be returned from this operation for various reasons,) s
+5 294 M
+(   including, but not limited to, the path does not exist, the path does) s
+5 283 M
+(   not refer to a directory object, the directory is not empty, or the) s
+5 272 M
+(   user has insufficient access or permission to perform the requested) s
+5 261 M
+(   operation.) s
+5 239 M
+(6.7 Scanning Directories) s
+5 217 M
+(   The files in a directory can be listed using the SSH_FXP_OPENDIR and) s
+5 206 M
+(   SSH_FXP_READDIR requests.  Each SSH_FXP_READDIR request returns one) s
+5 195 M
+(   or more file names with full file attributes for each file.  The) s
+5 184 M
+(   client should call SSH_FXP_READDIR repeatedly until it has found the) s
+5 173 M
+(   file it is looking for or until the server responds with a) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 19]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 20 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   SSH_FXP_STATUS message indicating an error \(normally SSH_FX_EOF if) s
+5 679 M
+(   there are no more files in the directory\).  The client should then) s
+5 668 M
+(   close the handle using the SSH_FXP_CLOSE request.) s
+5 646 M
+(   The SSH_FXP_OPENDIR opens a directory for reading.  It has the) s
+5 635 M
+(   following format:) s
+5 613 M
+(        uint32     id) s
+5 602 M
+(        string     path [UTF-8]) s
+5 580 M
+(   where `id' is the request identifier and `path' is the path name of) s
+5 569 M
+(   the directory to be listed \(without any trailing slash\).  See Section) s
+5 558 M
+(   ``File Names'' for more information on file names.  This will return) s
+5 547 M
+(   an error if the path does not specify a directory or if the directory) s
+5 536 M
+(   is not readable.  The server will respond to this request with either) s
+5 525 M
+(   a SSH_FXP_HANDLE or a SSH_FXP_STATUS message.) s
+5 503 M
+(   Once the directory has been successfully opened, files \(and) s
+5 492 M
+(   directories\) contained in it can be listed using SSH_FXP_READDIR) s
+5 481 M
+(   requests.  These are of the format) s
+5 459 M
+(        uint32     id) s
+5 448 M
+(        string     handle) s
+5 426 M
+(   where `id' is the request identifier, and `handle' is a handle) s
+5 415 M
+(   returned by SSH_FXP_OPENDIR.  \(It is a protocol error to attempt to) s
+5 404 M
+(   use an ordinary file handle returned by SSH_FXP_OPEN.\)) s
+5 382 M
+(   The server responds to this request with either a SSH_FXP_NAME or a) s
+5 371 M
+(   SSH_FXP_STATUS message.  One or more names may be returned at a time.) s
+5 360 M
+(   Full status information is returned for each name in order to speed) s
+5 349 M
+(   up typical directory listings.) s
+5 327 M
+(   If there are no more names available to be read, the server MUST) s
+5 316 M
+(   respond with a SSH_FXP_STATUS message with error code of SSH_FX_EOF.) s
+5 294 M
+(   When the client no longer wishes to read more names from the) s
+5 283 M
+(   directory, it SHOULD call SSH_FXP_CLOSE for the handle.  The handle) s
+5 272 M
+(   should be closed regardless of whether an error has occurred or not.) s
+5 250 M
+(6.8 Retrieving File Attributes) s
+5 228 M
+(   Very often, file attributes are automatically returned by) s
+5 217 M
+(   SSH_FXP_READDIR.  However, sometimes there is need to specifically) s
+5 206 M
+(   retrieve the attributes for a named file.  This can be done using the) s
+5 195 M
+(   SSH_FXP_STAT, SSH_FXP_LSTAT and SSH_FXP_FSTAT requests.) s
+5 173 M
+(   SSH_FXP_STAT and SSH_FXP_LSTAT only differ in that SSH_FXP_STAT) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 20]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (20,21) 11
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 21 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   follows symbolic links on the server, whereas SSH_FXP_LSTAT does not) s
+5 679 M
+(   follow symbolic links.  Both have the same format:) s
+5 657 M
+(        uint32     id) s
+5 646 M
+(        string     path [UTF-8]) s
+5 635 M
+(        uint32     flags) s
+5 613 M
+(   where `id' is the request identifier, and `path' specifies the file) s
+5 602 M
+(   system object for which status is to be returned.  The server) s
+5 591 M
+(   responds to this request with either SSH_FXP_ATTRS or SSH_FXP_STATUS.) s
+5 569 M
+(   The flags field specify the attribute flags in which the client has) s
+5 558 M
+(   particular interest.  This is a hint to the server.  For example,) s
+5 547 M
+(   because retrieving owner / group and acl information can be an) s
+5 536 M
+(   expensive operation under some operating systems, the server may) s
+5 525 M
+(   choose not to retrieve this information unless the client expresses a) s
+5 514 M
+(   specific interest in it.) s
+5 492 M
+(   The client has no guarantee the server will provide all the fields) s
+5 481 M
+(   that it has expressed an interest in.) s
+5 459 M
+(   SSH_FXP_FSTAT differs from the others in that it returns status) s
+5 448 M
+(   information for an open file \(identified by the file handle\).  Its) s
+5 437 M
+(   format is as follows:) s
+5 415 M
+(        uint32     id) s
+5 404 M
+(        string     handle) s
+5 393 M
+(        uint32     flags) s
+5 371 M
+(   where `id' is the request identifier and `handle' is a file handle) s
+5 360 M
+(   returned by SSH_FXP_OPEN.  The server responds to this request with) s
+5 349 M
+(   SSH_FXP_ATTRS or SSH_FXP_STATUS.) s
+5 327 M
+(6.9 Setting File Attributes) s
+5 305 M
+(   File attributes may be modified using the SSH_FXP_SETSTAT and) s
+5 294 M
+(   SSH_FXP_FSETSTAT requests.  These requests are used for operations) s
+5 283 M
+(   such as changing the ownership, permissions or access times, as well) s
+5 272 M
+(   as for truncating a file.) s
+5 250 M
+(   The SSH_FXP_SETSTAT request is of the following format:) s
+5 228 M
+(        uint32     id) s
+5 217 M
+(        string     path [UTF-8]) s
+5 206 M
+(        ATTRS      attrs) s
+5 184 M
+(   where `id' is the request identifier, `path' specifies the file) s
+5 173 M
+(   system object \(e.g.  file or directory\) whose attributes are to be) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 21]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 22 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   modified, and `attrs' specifies the modifications to be made to its) s
+5 679 M
+(   attributes.  Attributes are discussed in more detail in Section) s
+5 668 M
+(   ``File Attributes''.) s
+5 646 M
+(   An error will be returned if the specified file system object does) s
+5 635 M
+(   not exist or the user does not have sufficient rights to modify the) s
+5 624 M
+(   specified attributes.  The server responds to this request with a) s
+5 613 M
+(   SSH_FXP_STATUS message.) s
+5 591 M
+(   The SSH_FXP_FSETSTAT request modifies the attributes of a file which) s
+5 580 M
+(   is already open.  It has the following format:) s
+5 558 M
+(        uint32     id) s
+5 547 M
+(        string     handle) s
+5 536 M
+(        ATTRS      attrs) s
+5 514 M
+(   where `id' is the request identifier, `handle' \(MUST be returned by) s
+5 503 M
+(   SSH_FXP_OPEN\) identifies the file whose attributes are to be) s
+5 492 M
+(   modified, and `attrs' specifies the modifications to be made to its) s
+5 481 M
+(   attributes.  Attributes are discussed in more detail in Section) s
+5 470 M
+(   ``File Attributes''.  The server will respond to this request with) s
+5 459 M
+(   SSH_FXP_STATUS.) s
+5 437 M
+(6.10 Dealing with Symbolic links) s
+5 415 M
+(   The SSH_FXP_READLINK request may be used to read the target of a) s
+5 404 M
+(   symbolic link.  It would have a data part as follows:) s
+5 382 M
+(        uint32     id) s
+5 371 M
+(        string     path [UTF-8]) s
+5 349 M
+(   where `id' is the request identifier and `path' specifies the path) s
+5 338 M
+(   name of the symlink to be read.) s
+5 316 M
+(   The server will respond with a SSH_FXP_NAME packet containing only) s
+5 305 M
+(   one name and a dummy attributes value.  The name in the returned) s
+5 294 M
+(   packet contains the target of the link.  If an error occurs, the) s
+5 283 M
+(   server may respond with SSH_FXP_STATUS.) s
+5 261 M
+(   The SSH_FXP_SYMLINK request will create a symbolic link on the) s
+5 250 M
+(   server.  It is of the following format) s
+5 228 M
+(        uint32     id) s
+5 217 M
+(        string     linkpath   [UTF-8]) s
+5 206 M
+(        string     targetpath [UTF-8]) s
+5 184 M
+(   where `id' is the request identifier, `linkpath' specifies the path) s
+5 173 M
+(   name of the symlink to be created and `targetpath' specifies the) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 22]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (22,23) 12
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 23 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   target of the symlink.  The server shall respond with a) s
+5 679 M
+(   SSH_FXP_STATUS indicating either success \(SSH_FX_OK\) or an error) s
+5 668 M
+(   condition.) s
+5 646 M
+(6.11 Canonicalizing the Server-Side Path Name) s
+5 624 M
+(   The SSH_FXP_REALPATH request can be used to have the server) s
+5 613 M
+(   canonicalize any given path name to an absolute path.  This is useful) s
+5 602 M
+(   for converting path names containing ".." components or relative) s
+5 591 M
+(   pathnames without a leading slash into absolute paths.  The format of) s
+5 580 M
+(   the request is as follows:) s
+5 558 M
+(        uint32     id) s
+5 547 M
+(        string     path [UTF-8]) s
+5 525 M
+(   where `id' is the request identifier and `path' specifies the path) s
+5 514 M
+(   name to be canonicalized.  The server will respond with a) s
+5 503 M
+(   SSH_FXP_NAME packet containing the name in canonical form and a dummy) s
+5 492 M
+(   attributes value.  If an error occurs, the server may also respond) s
+5 481 M
+(   with SSH_FXP_STATUS.) s
+5 459 M
+(6.11.1 Best practice for dealing with paths) s
+5 437 M
+(   The client SHOULD treat the results of SSH_FXP_REALPATH as a) s
+5 426 M
+(   canonical absolute path, even if the path does not appear to be) s
+5 415 M
+(   absolute.  A client that use REALPATH\("."\) and treats the result as) s
+5 404 M
+(   absolute, even if there is no leading slash, will continue to) s
+5 393 M
+(   function correctly, even when talking to a Windows NT or VMS style) s
+5 382 M
+(   system, where absolute paths may not begin with a slash.) s
+5 360 M
+(   For example, if the client wishes to change directory up, and the) s
+5 349 M
+(   server has returned "c:/x/y/z" from REALPATH, the client SHOULD use) s
+5 338 M
+(   "c:/x/y/z/..".) s
+5 316 M
+(   As a second example, if the client wishes to open the file "x.txt" in) s
+5 305 M
+(   the current directory, and server has returned "dka100:/x/y/z" as the) s
+5 294 M
+(   canonical path of the directory, the client SHOULD open "dka100:/x/y/) s
+5 283 M
+(   z/x.txt") s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 23]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 24 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(7. Responses from the Server to the Client) s
+5 668 M
+(   The server responds to the client using one of a few response) s
+5 657 M
+(   packets.  All requests can return a SSH_FXP_STATUS response upon) s
+5 646 M
+(   failure.  When the operation is successful, any of the responses may) s
+5 635 M
+(   be returned \(depending on the operation\).  If no data needs to be) s
+5 624 M
+(   returned to the client, the SSH_FXP_STATUS response with SSH_FX_OK) s
+5 613 M
+(   status is appropriate.  Otherwise, the SSH_FXP_HANDLE message is used) s
+5 602 M
+(   to return a file handle \(for SSH_FXP_OPEN and SSH_FXP_OPENDIR) s
+5 591 M
+(   requests\), SSH_FXP_DATA is used to return data from SSH_FXP_READ,) s
+5 580 M
+(   SSH_FXP_NAME is used to return one or more file names from a) s
+5 569 M
+(   SSH_FXP_READDIR or SSH_FXP_REALPATH request, and SSH_FXP_ATTRS is) s
+5 558 M
+(   used to return file attributes from SSH_FXP_STAT, SSH_FXP_LSTAT, and) s
+5 547 M
+(   SSH_FXP_FSTAT requests.) s
+5 525 M
+(   Exactly one response will be returned for each request.  Each) s
+5 514 M
+(   response packet contains a request identifier which can be used to) s
+5 503 M
+(   match each response with the corresponding request.  Note that it is) s
+5 492 M
+(   legal to have several requests outstanding simultaneously, and the) s
+5 481 M
+(   server is allowed to send responses to them in a different order from) s
+5 470 M
+(   the order in which the requests were sent \(the result of their) s
+5 459 M
+(   execution, however, is guaranteed to be as if they had been processed) s
+5 448 M
+(   one at a time in the order in which the requests were sent\).) s
+5 426 M
+(   Response packets are of the same general format as request packets.) s
+5 415 M
+(   Each response packet begins with the request identifier.) s
+5 393 M
+(   The format of the data portion of the SSH_FXP_STATUS response is as) s
+5 382 M
+(   follows:) s
+5 360 M
+(        uint32     id) s
+5 349 M
+(        uint32     error/status code) s
+5 338 M
+(        string     error message \(ISO-10646 UTF-8 [RFC-2279]\)) s
+5 327 M
+(        string     language tag \(as defined in [RFC-1766]\)) s
+5 305 M
+(   where `id' is the request identifier, and `error/status code') s
+5 294 M
+(   indicates the result of the requested operation.  The value SSH_FX_OK) s
+5 283 M
+(   indicates success, and all other values indicate failure.) s
+5 261 M
+(   Currently, the following values are defined \(other values may be) s
+5 250 M
+(   defined by future versions of this protocol\):) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 24]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (24,25) 13
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 25 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(        #define SSH_FX_OK                            0) s
+5 679 M
+(        #define SSH_FX_EOF                           1) s
+5 668 M
+(        #define SSH_FX_NO_SUCH_FILE                  2) s
+5 657 M
+(        #define SSH_FX_PERMISSION_DENIED             3) s
+5 646 M
+(        #define SSH_FX_FAILURE                       4) s
+5 635 M
+(        #define SSH_FX_BAD_MESSAGE                   5) s
+5 624 M
+(        #define SSH_FX_NO_CONNECTION                 6) s
+5 613 M
+(        #define SSH_FX_CONNECTION_LOST               7) s
+5 602 M
+(        #define SSH_FX_OP_UNSUPPORTED                8) s
+5 591 M
+(        #define SSH_FX_INVALID_HANDLE                9) s
+5 580 M
+(        #define SSH_FX_NO_SUCH_PATH                  10) s
+5 569 M
+(        #define SSH_FX_FILE_ALREADY_EXISTS                       11) s
+5 558 M
+(        #define SSH_FX_WRITE_PROTECT                             12) s
+5 536 M
+(   SSH_FX_OK) s
+5 525 M
+(      Indicates successful completion of the operation.) s
+5 503 M
+(   SSH_FX_EOF) s
+5 492 M
+(      indicates end-of-file condition; for SSH_FX_READ it means that no) s
+5 481 M
+(      more data is available in the file, and for SSH_FX_READDIR it) s
+5 470 M
+(      indicates that no more files are contained in the directory.) s
+5 448 M
+(   SSH_FX_NO_SUCH_FILE) s
+5 437 M
+(      is returned when a reference is made to a file which does not) s
+5 426 M
+(      exist.) s
+5 404 M
+(   SSH_FX_PERMISSION_DENIED) s
+5 393 M
+(      is returned when the authenticated user does not have sufficient) s
+5 382 M
+(      permissions to perform the operation.) s
+5 360 M
+(   SSH_FX_FAILURE) s
+5 349 M
+(      is a generic catch-all error message; it should be returned if an) s
+5 338 M
+(      error occurs for which there is no more specific error code) s
+5 327 M
+(      defined.) s
+5 305 M
+(   SSH_FX_BAD_MESSAGE) s
+5 294 M
+(      may be returned if a badly formatted packet or protocol) s
+5 283 M
+(      incompatibility is detected.) s
+5 261 M
+(   SSH_FX_NO_CONNECTION) s
+5 250 M
+(      is a pseudo-error which indicates that the client has no) s
+5 239 M
+(      connection to the server \(it can only be generated locally by the) s
+5 228 M
+(      client, and MUST NOT be returned by servers\).) s
+5 206 M
+(   SSH_FX_CONNECTION_LOST) s
+5 195 M
+(      is a pseudo-error which indicates that the connection to the) s
+5 184 M
+(      server has been lost \(it can only be generated locally by the) s
+5 173 M
+(      client, and MUST NOT be returned by servers\).) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 25]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 26 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   SSH_FX_OP_UNSUPPORTED) s
+5 679 M
+(      indicates that an attempt was made to perform an operation which) s
+5 668 M
+(      is not supported for the server \(it may be generated locally by) s
+5 657 M
+(      the client if e.g.  the version number exchange indicates that a) s
+5 646 M
+(      required feature is not supported by the server, or it may be) s
+5 635 M
+(      returned by the server if the server does not implement an) s
+5 624 M
+(      operation\).) s
+5 602 M
+(   SSH_FX_INVALID_HANDLE) s
+5 591 M
+(      The handle value was invalid.) s
+5 569 M
+(   SSH_FX_NO_SUCH_PATH) s
+5 558 M
+(      The file path does not exist or is invalid.) s
+5 536 M
+(   SSH_FX_FILE_ALREADY_EXISTS) s
+5 525 M
+(      The file already exists.) s
+5 503 M
+(   SSH_FX_WRITE_PROTECT) s
+5 492 M
+(      The file is on read only media, or the media is write protected.) s
+5 470 M
+(   The SSH_FXP_HANDLE response has the following format:) s
+5 448 M
+(        uint32     id) s
+5 437 M
+(        string     handle) s
+5 415 M
+(   where `id' is the request identifier, and `handle' is an arbitrary) s
+5 404 M
+(   string that identifies an open file or directory on the server.  The) s
+5 393 M
+(   handle is opaque to the client; the client MUST NOT attempt to) s
+5 382 M
+(   interpret or modify it in any way.  The length of the handle string) s
+5 371 M
+(   MUST NOT exceed 256 data bytes.) s
+5 349 M
+(   The SSH_FXP_DATA response has the following format:) s
+5 327 M
+(        uint32     id) s
+5 316 M
+(        string     data) s
+5 294 M
+(   where `id' is the request identifier, and `data' is an arbitrary byte) s
+5 283 M
+(   string containing the requested data.  The data string may be at most) s
+5 272 M
+(   the number of bytes requested in a SSH_FXP_READ request, but may also) s
+5 261 M
+(   be shorter if end of file is reached or if the read is from something) s
+5 250 M
+(   other than a regular file.) s
+5 228 M
+(   The SSH_FXP_NAME response has the following format:) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 26]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (26,27) 14
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 27 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(        uint32     id) s
+5 679 M
+(        uint32     count) s
+5 668 M
+(        repeats count times:) s
+5 657 M
+(                string     filename [UTF-8]) s
+5 646 M
+(                ATTRS      attrs) s
+5 624 M
+(   where `id' is the request identifier, `count' is the number of names) s
+5 613 M
+(   returned in this response, and the remaining fields repeat `count') s
+5 602 M
+(   times \(so that all three fields are first included for the first) s
+5 591 M
+(   file, then for the second file, etc\).  In the repeated part,) s
+5 580 M
+(   `filename' is a file name being returned \(for SSH_FXP_READDIR, it) s
+5 569 M
+(   will be a relative name within the directory, without any path) s
+5 558 M
+(   components; for SSH_FXP_REALPATH it will be an absolute path name\),) s
+5 547 M
+(   and `attrs' is the attributes of the file as described in Section) s
+5 536 M
+(   ``File Attributes''.) s
+5 514 M
+(   The SSH_FXP_ATTRS response has the following format:) s
+5 492 M
+(        uint32     id) s
+5 481 M
+(        ATTRS      attrs) s
+5 459 M
+(   where `id' is the request identifier, and `attrs' is the returned) s
+5 448 M
+(   file attributes as described in Section ``File Attributes''.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 27]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 28 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(8. Vendor-Specific Extensions) s
+5 668 M
+(   The SSH_FXP_EXTENDED request provides a generic extension mechanism) s
+5 657 M
+(   for adding vendor-specific commands.  The request has the following) s
+5 646 M
+(   format:) s
+5 624 M
+(        uint32     id) s
+5 613 M
+(        string     extended-request) s
+5 602 M
+(        ... any request-specific data ...) s
+5 580 M
+(   where `id' is the request identifier, and `extended-request' is a) s
+5 569 M
+(   string of the format "name@domain", where domain is an internet) s
+5 558 M
+(   domain name of the vendor defining the request.  The rest of the) s
+5 547 M
+(   request is completely vendor-specific, and servers should only) s
+5 536 M
+(   attempt to interpret it if they recognize the `extended-request') s
+5 525 M
+(   name.) s
+5 503 M
+(   The server may respond to such requests using any of the response) s
+5 492 M
+(   packets defined in Section ``Responses from the Server to the) s
+5 481 M
+(   Client''.  Additionally, the server may also respond with a) s
+5 470 M
+(   SSH_FXP_EXTENDED_REPLY packet, as defined below.  If the server does) s
+5 459 M
+(   not recognize the `extended-request' name, then the server MUST) s
+5 448 M
+(   respond with SSH_FXP_STATUS with error/status set to) s
+5 437 M
+(   SSH_FX_OP_UNSUPPORTED.) s
+5 415 M
+(   The SSH_FXP_EXTENDED_REPLY packet can be used to carry arbitrary) s
+5 404 M
+(   extension-specific data from the server to the client.  It is of the) s
+5 393 M
+(   following format:) s
+5 371 M
+(        uint32     id) s
+5 360 M
+(        ... any request-specific data ...) s
+5 338 M
+(   There is a range of packet types reserved for use by extensions.  In) s
+5 327 M
+(   order to avoid collision, extensions that turn on the use of) s
+5 316 M
+(   additional packet types should determine those numbers dynamically.) s
+5 294 M
+(   The suggested way of doing this is have an extension request from the) s
+5 283 M
+(   client to the server that enables the extension; the extension) s
+5 272 M
+(   response from the server to the client would specify the actual type) s
+5 261 M
+(   values to use, in additional to any other data.) s
+5 239 M
+(   Extension authors should be mindful of the limited range of packet) s
+5 228 M
+(   types available \(there are only 45 values available\) and avoid) s
+5 217 M
+(   requiring a new packet type where possible.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 28]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (28,29) 15
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 29 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(9. Security Considerations) s
+5 668 M
+(   This protocol assumes that it is run over a secure channel and that) s
+5 657 M
+(   the endpoints of the channel have been authenticated.  Thus, this) s
+5 646 M
+(   protocol assumes that it is externally protected from network-level) s
+5 635 M
+(   attacks.) s
+5 613 M
+(   This protocol provides file system access to arbitrary files on the) s
+5 602 M
+(   server \(only constrained by the server implementation\).  It is the) s
+5 591 M
+(   responsibility of the server implementation to enforce any access) s
+5 580 M
+(   controls that may be required to limit the access allowed for any) s
+5 569 M
+(   particular user \(the user being authenticated externally to this) s
+5 558 M
+(   protocol, typically using the SSH User Authentication Protocol [8].) s
+5 536 M
+(   Care must be taken in the server implementation to check the validity) s
+5 525 M
+(   of received file handle strings.  The server should not rely on them) s
+5 514 M
+(   directly; it MUST check the validity of each handle before relying on) s
+5 503 M
+(   it.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 29]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 30 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(10. Changes from previous protocol versions) s
+5 668 M
+(   The SSH File Transfer Protocol has changed over time, before it's) s
+5 657 M
+(   standardization.  The following is a description of the incompatible) s
+5 646 M
+(   changes between different versions.) s
+5 624 M
+(10.1 Changes between versions 4 and 3) s
+5 602 M
+(   Many of the changes between version 4 and version 3 are to the) s
+5 591 M
+(   attribute structure to make it more flexible for non-unix platforms.) s
+5 569 M
+(   o  Make all filenames UTF-8.) s
+5 547 M
+(   o  Added 'newline' extension.) s
+5 525 M
+(   o  Made file attribute owner and group strings so they can actually) s
+5 514 M
+(      be used on disparate systems.) s
+5 492 M
+(   o  Added createtime field, and added separate flags for atime,) s
+5 481 M
+(      createtime, and mtime so they can be set separately.) s
+5 459 M
+(   o  Split the file type out of the permissions field and into it's own) s
+5 448 M
+(      field \(which is always present.\)) s
+5 426 M
+(   o  Added acl attribute.) s
+5 404 M
+(   o  Added SSH_FXF_TEXT file open flag.) s
+5 382 M
+(   o  Added flags field to the get stat commands so that the client can) s
+5 371 M
+(      specifically request information the server might not normally) s
+5 360 M
+(      included for performance reasons.) s
+5 338 M
+(   o  Removed the long filename from the names structure-- it can now be) s
+5 327 M
+(      built from information available in the attrs structure.) s
+5 305 M
+(   o  Added reserved range of packet numbers for extensions.) s
+5 283 M
+(   o  Added several additional error codes.) s
+5 261 M
+(   o  Change the way version negotiate works slightly.  Previously, if) s
+5 250 M
+(      the client version were higher than the server version, the server) s
+5 239 M
+(      was supposed to 'echo back' the clients version.  The server now) s
+5 228 M
+(      sends it's own version and the lower of the two is considered to) s
+5 217 M
+(      be the one in use.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 30]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (30,31) 16
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 31 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(10.2 Changes between versions 3 and 2) s
+5 668 M
+(   o  The SSH_FXP_READLINK and SSH_FXP_SYMLINK messages were added.) s
+5 646 M
+(   o  The SSH_FXP_EXTENDED and SSH_FXP_EXTENDED_REPLY messages were) s
+5 635 M
+(      added.) s
+5 613 M
+(   o  The SSH_FXP_STATUS message was changed to include fields `error) s
+5 602 M
+(      message' and `language tag'.) s
+5 569 M
+(10.3 Changes between versions 2 and 1) s
+5 547 M
+(   o  The SSH_FXP_RENAME message was added.) s
+5 514 M
+(10.4 Changes between versions 1 and 0) s
+5 492 M
+(   o  Implementation changes, no actual protocol changes.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 31]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 32 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(11. Trademark Issues) s
+5 668 M
+(   "ssh" is a registered trademark of SSH Communications Security Corp) s
+5 657 M
+(   in the United States and/or other countries.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 32]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (32,33) 17
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 33 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(References) s
+5 668 M
+(   [1]  Dierks, T., Allen, C., Treese, W., Karlton, P., Freier, A. and) s
+5 657 M
+(        P. Kocher, "The TLS Protocol Version 1.0", RFC 2246, January) s
+5 646 M
+(        1999.) s
+5 624 M
+(   [2]  Alvestrand, H., "IETF Policy on Character Sets and Languages",) s
+5 613 M
+(        BCP 18, RFC 2277, January 1998.) s
+5 591 M
+(   [3]  Shepler, S., Callaghan, B., Robinson, D., Thurlow, R., Beame,) s
+5 580 M
+(        C., Eisler, M. and D. Noveck, "NFS version 4 Protocol", RFC) s
+5 569 M
+(        3010, December 2000.) s
+5 547 M
+(   [4]  Institute of Electrical and Electronics Engineers, "Information) s
+5 536 M
+(        Technology - Portable Operating System Interface \(POSIX\) - Part) s
+5 525 M
+(        1: System Application Program Interface \(API\) [C Language]",) s
+5 514 M
+(        IEEE Standard 1003.2, 1996.) s
+5 492 M
+(   [5]  Rinne, T., Ylonen, T., Kivinen, T., Saarinen, M. and S.) s
+5 481 M
+(        Lehtinen, "SSH Protocol Architecture", draft-ietf-secsh-) s
+5 470 M
+(        architecture-13 \(work in progress\), September 2002.) s
+5 448 M
+(   [6]  Rinne, T., Ylonen, T., Kivinen, T., Saarinen, M. and S.) s
+5 437 M
+(        Lehtinen, "SSH Protocol Transport Protocol", draft-ietf-secsh-) s
+5 426 M
+(        transport-15 \(work in progress\), September 2002.) s
+5 404 M
+(   [7]  Rinne, T., Ylonen, T., Kivinen, T., Saarinen, M. and S.) s
+5 393 M
+(        Lehtinen, "SSH Connection Protocol", draft-ietf-secsh-connect-16) s
+5 382 M
+(        \(work in progress\), September 2002.) s
+5 360 M
+(   [8]  Rinne, T., Ylonen, T., Kivinen, T., Saarinen, M. and S.) s
+5 349 M
+(        Lehtinen, "SSH Authentication Protocol", draft-ietf-secsh-) s
+5 338 M
+(        userauth-16 \(work in progress\), September 2002.) s
+5 305 M
+(Authors' Addresses) s
+5 283 M
+(   Joseph Galbraith) s
+5 272 M
+(   VanDyke Software) s
+5 261 M
+(   4848 Tramway Ridge Blvd) s
+5 250 M
+(   Suite 101) s
+5 239 M
+(   Albuquerque, NM  87111) s
+5 228 M
+(   US) s
+5 206 M
+(   Phone: +1 505 332 5700) s
+5 195 M
+(   EMail: [email protected]) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 33]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 34 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(   Tatu Ylonen) s
+5 679 M
+(   SSH Communications Security Corp) s
+5 668 M
+(   Fredrikinkatu 42) s
+5 657 M
+(   HELSINKI  FIN-00100) s
+5 646 M
+(   Finland) s
+5 624 M
+(   EMail: [email protected]) s
+5 591 M
+(   Sami Lehtinen) s
+5 580 M
+(   SSH Communications Security Corp) s
+5 569 M
+(   Fredrikinkatu 42) s
+5 558 M
+(   HELSINKI  FIN-00100) s
+5 547 M
+(   Finland) s
+5 525 M
+(   EMail: [email protected]) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 34]) s
+_R
+S
+PStoPSsaved restore
+%%Page: (34,35) 18
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 0.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+/showpage{}def/copypage{}def/erasepage{}def
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 35 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+5 723 M
+(Internet-Draft         SSH File Transfer Protocol           October 2002) s
+5 690 M
+(Full Copyright Statement) s
+5 668 M
+(   Copyright \(C\) The Internet Society \(2002\).  All Rights Reserved.) s
+5 646 M
+(   This document and translations of it may be copied and furnished to) s
+5 635 M
+(   others, and derivative works that comment on or otherwise explain it) s
+5 624 M
+(   or assist in its implementation may be prepared, copied, published) s
+5 613 M
+(   and distributed, in whole or in part, without restriction of any) s
+5 602 M
+(   kind, provided that the above copyright notice and this paragraph are) s
+5 591 M
+(   included on all such copies and derivative works.  However, this) s
+5 580 M
+(   document itself may not be modified in any way, such as by removing) s
+5 569 M
+(   the copyright notice or references to the Internet Society or other) s
+5 558 M
+(   Internet organizations, except as needed for the purpose of) s
+5 547 M
+(   developing Internet standards in which case the procedures for) s
+5 536 M
+(   copyrights defined in the Internet Standards process must be) s
+5 525 M
+(   followed, or as required to translate it into languages other than) s
+5 514 M
+(   English.) s
+5 492 M
+(   The limited permissions granted above are perpetual and will not be) s
+5 481 M
+(   revoked by the Internet Society or its successors or assigns.) s
+5 459 M
+(   This document and the information contained herein is provided on an) s
+5 448 M
+(   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING) s
+5 437 M
+(   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING) s
+5 426 M
+(   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION) s
+5 415 M
+(   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF) s
+5 404 M
+(   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.) s
+5 382 M
+(Acknowledgement) s
+5 360 M
+(   Funding for the RFC Editor function is currently provided by the) s
+5 349 M
+(   Internet Society.) s
+5 129 M
+(Galbraith, et al.        Expires April 16, 2003                [Page 35]) s
+_R
+S
+PStoPSsaved restore
+userdict/PStoPSsaved save put
+PStoPSmatrix setmatrix
+595.000000 421.271378 translate
+90 rotate
+0.706651 dup scale
+userdict/PStoPSmatrix matrix currentmatrix put
+userdict/PStoPSclip{0 0 moveto
+ 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto
+ closepath}put initclip
+PStoPSxform concat
+%%BeginPageSetup
+_S
+75 0 translate
+/pagenum 36 def
+/fname () def
+/fdir () def
+/ftail () def
+/user_header_p false def
+%%EndPageSetup
+_R
+S
+PStoPSsaved restore
+%%Trailer
+%%Pages: 36
+%%DocumentNeededResources: font Courier-Bold Courier 
+%%EOF