diff options
Diffstat (limited to 'erts/emulator/beam/bif_instrs.tab')
| -rw-r--r-- | erts/emulator/beam/bif_instrs.tab | 539 |
1 files changed, 539 insertions, 0 deletions
diff --git a/erts/emulator/beam/bif_instrs.tab b/erts/emulator/beam/bif_instrs.tab new file mode 100644 index 0000000000..0932b8b985 --- /dev/null +++ b/erts/emulator/beam/bif_instrs.tab @@ -0,0 +1,539 @@ +// -*- c -*- +// +// %CopyrightBegin% +// +// Copyright Ericsson AB 2017. All Rights Reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +// %CopyrightEnd% +// + +// ================================================================ +// All guards with zero arguments have special instructions, +// for example: +// +// self/0 +// node/0 +// +// All other guard BIFs take one or two arguments. +// ================================================================ + +CALL_GUARD_BIF(BF, TmpReg, Dst) { + Eterm result; + + ERTS_DBG_CHK_REDS(c_p, FCALLS); + c_p->fcalls = FCALLS; + PROCESS_MAIN_CHK_LOCKS(c_p); + ASSERT(!ERTS_PROC_IS_EXITING(c_p)); + ERTS_CHK_MBUF_SZ(c_p); + result = (*$BF)(c_p, $TmpReg, I); + ERTS_CHK_MBUF_SZ(c_p); + ASSERT(!ERTS_PROC_IS_EXITING(c_p) || is_non_value(result)); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + PROCESS_MAIN_CHK_LOCKS(c_p); + ERTS_HOLE_CHECK(c_p); + FCALLS = c_p->fcalls; + ERTS_DBG_CHK_REDS(c_p, FCALLS); + if (ERTS_LIKELY(is_value(result))) { + $Dst = result; + $NEXT0(); + } +} + +// Guard BIF in head. On failure, ignore the error and jump +// to the code for the next clause. We don't support tracing +// of guard BIFs. + +bif1(Fail, Bif, Src, Dst) { + ErtsBifFunc bf; + Eterm tmp_reg[1]; + + tmp_reg[0] = $Src; + bf = (BifFunction) $Bif; + $CALL_GUARD_BIF(bf, tmp_reg, $Dst); + + $FAIL($Fail); +} + +// +// Guard BIF in body. It can fail like any BIF. No trace support. +// + +bif1_body(Bif, Src, Dst) { + ErtsBifFunc bf; + Eterm tmp_reg[1]; + + tmp_reg[0] = $Src; + bf = (BifFunction) $Bif; + $CALL_GUARD_BIF(bf, tmp_reg, $Dst); + + reg[0] = tmp_reg[0]; + SWAPOUT; + I = handle_error(c_p, I, reg, ubif2mfa((void *) bf)); + goto post_error_handling; +} + +// +// Guard bif in guard with two arguments ('and'/2, 'or'/2, 'xor'/2). +// + +i_bif2(Fail, Bif, Src1, Src2, Dst) { + Eterm tmp_reg[2]; + ErtsBifFunc bf; + + tmp_reg[0] = $Src1; + tmp_reg[1] = $Src2; + bf = (ErtsBifFunc) $Bif; + $CALL_GUARD_BIF(bf, tmp_reg, $Dst); + $FAIL($Fail); +} + +// +// Guard bif in body with two arguments ('and'/2, 'or'/2, 'xor'/2). +// + +i_bif2_body(Bif, Src1, Src2, Dst) { + Eterm tmp_reg[2]; + ErtsBifFunc bf; + + tmp_reg[0] = $Src1; + tmp_reg[1] = $Src2; + bf = (ErtsBifFunc) $Bif; + $CALL_GUARD_BIF(bf, tmp_reg, $Dst); + reg[0] = tmp_reg[0]; + reg[1] = tmp_reg[1]; + SWAPOUT; + I = handle_error(c_p, I, reg, ubif2mfa((void *) bf)); + goto post_error_handling; +} + +// +// Garbage-collecting BIF with one argument in either guard or body. +// + +i_gc_bif1(Fail, Bif, Src, Live, Dst) { + typedef Eterm (*GcBifFunction)(Process*, Eterm*, Uint); + GcBifFunction bf; + Eterm result; + Uint live = (Uint) $Live; + + x(live) = $Src; + bf = (GcBifFunction) $Bif; + ERTS_DBG_CHK_REDS(c_p, FCALLS); + c_p->fcalls = FCALLS; + SWAPOUT; + PROCESS_MAIN_CHK_LOCKS(c_p); + ERTS_UNREQ_PROC_MAIN_LOCK(c_p); + ERTS_CHK_MBUF_SZ(c_p); + result = (*bf)(c_p, reg, live); + ERTS_CHK_MBUF_SZ(c_p); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + ERTS_REQ_PROC_MAIN_LOCK(c_p); + PROCESS_MAIN_CHK_LOCKS(c_p); + SWAPIN; + ERTS_HOLE_CHECK(c_p); + FCALLS = c_p->fcalls; + ERTS_DBG_CHK_REDS(c_p, FCALLS); + if (ERTS_LIKELY(is_value(result))) { + $REFRESH_GEN_DEST(); + $Dst = result; + $NEXT0(); + } + if (ERTS_LIKELY($Fail != 0)) { /* Handle error in guard. */ + $JUMP($Fail); + } + + /* Handle error in body. */ + x(0) = x(live); + I = handle_error(c_p, I, reg, gcbif2mfa((void *) bf)); + goto post_error_handling; +} + +// +// Garbage-collecting BIF with two arguments in either guard or body. +// + +i_gc_bif2(Fail, Bif, Live, Src1, Src2, Dst) { + typedef Eterm (*GcBifFunction)(Process*, Eterm*, Uint); + GcBifFunction bf; + Eterm result; + Uint live = (Uint) $Live; + + /* + * XXX This calling convention does not make sense. 'live' + * should point out the first argument, not the second + * (i.e. 'live' should not be incremented below). + */ + x(live) = $Src1; + x(live+1) = $Src2; + live++; + + bf = (GcBifFunction) $Bif; + ERTS_DBG_CHK_REDS(c_p, FCALLS); + c_p->fcalls = FCALLS; + SWAPOUT; + PROCESS_MAIN_CHK_LOCKS(c_p); + ERTS_UNREQ_PROC_MAIN_LOCK(c_p); + ERTS_CHK_MBUF_SZ(c_p); + result = (*bf)(c_p, reg, live); + ERTS_CHK_MBUF_SZ(c_p); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + ERTS_REQ_PROC_MAIN_LOCK(c_p); + PROCESS_MAIN_CHK_LOCKS(c_p); + SWAPIN; + ERTS_HOLE_CHECK(c_p); + FCALLS = c_p->fcalls; + ERTS_DBG_CHK_REDS(c_p, FCALLS); + if (ERTS_LIKELY(is_value(result))) { + $REFRESH_GEN_DEST(); + $Dst = result; + $NEXT0(); + } + + if (ERTS_LIKELY($Fail != 0)) { /* Handle error in guard. */ + $JUMP($Fail); + } + + /* Handle error in body. */ + live--; + x(0) = x(live); + x(1) = x(live+1); + I = handle_error(c_p, I, reg, gcbif2mfa((void *) bf)); + goto post_error_handling; +} + +// +// Garbage-collecting BIF with three arguments in either guard or body. +// + +i_gc_bif3(Fail, Bif, Live, Src2, Src3, Dst) { + typedef Eterm (*GcBifFunction)(Process*, Eterm*, Uint); + GcBifFunction bf; + Eterm result; + Uint live = (Uint) $Live; + + /* + * XXX This calling convention does not make sense. 'live' + * should point out the first argument, not the third + * (i.e. 'live' should not be incremented below). + */ + x(live) = x(SCRATCH_X_REG); + x(live+1) = $Src2; + x(live+2) = $Src3; + live += 2; + + bf = (GcBifFunction) $Bif; + ERTS_DBG_CHK_REDS(c_p, FCALLS); + c_p->fcalls = FCALLS; + SWAPOUT; + PROCESS_MAIN_CHK_LOCKS(c_p); + ERTS_UNREQ_PROC_MAIN_LOCK(c_p); + ERTS_CHK_MBUF_SZ(c_p); + result = (*bf)(c_p, reg, live); + ERTS_CHK_MBUF_SZ(c_p); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + ERTS_REQ_PROC_MAIN_LOCK(c_p); + PROCESS_MAIN_CHK_LOCKS(c_p); + SWAPIN; + ERTS_HOLE_CHECK(c_p); + FCALLS = c_p->fcalls; + ERTS_DBG_CHK_REDS(c_p, FCALLS); + if (ERTS_LIKELY(is_value(result))) { + $REFRESH_GEN_DEST(); + $Dst = result; + $NEXT0(); + } + + /* Handle error in guard. */ + if (ERTS_LIKELY($Fail != 0)) { + $JUMP($Fail); + } + + /* Handle error in body. */ + live -= 2; + x(0) = x(live); + x(1) = x(live+1); + x(2) = x(live+2); + I = handle_error(c_p, I, reg, gcbif2mfa((void *) bf)); + goto post_error_handling; +} + +// +// The most general BIF call. The BIF may build any amount of data +// on the heap. The result is always returned in r(0). +// +call_bif(Exp) { + ErtsBifFunc bf; + Eterm result; + ErlHeapFragment *live_hf_end; + Export *export = (Export*) $Exp; + + if (!((FCALLS - 1) > 0 || (FCALLS-1) > neg_o_reds)) { + /* If we have run out of reductions, we do a context + switch before calling the bif */ + c_p->arity = GET_BIF_ARITY(export); + c_p->current = &export->info.mfa; + goto context_switch3; + } + + ERTS_MSACC_SET_BIF_STATE_CACHED_X(GET_BIF_MODULE(export), + GET_BIF_ADDRESS(export)); + + bf = GET_BIF_ADDRESS(export); + + PRE_BIF_SWAPOUT(c_p); + ERTS_DBG_CHK_REDS(c_p, FCALLS); + c_p->fcalls = FCALLS - 1; + if (FCALLS <= 0) { + save_calls(c_p, export); + } + ASSERT(!ERTS_PROC_IS_EXITING(c_p)); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + live_hf_end = c_p->mbuf; + ERTS_CHK_MBUF_SZ(c_p); + result = (*bf)(c_p, reg, I); + ERTS_CHK_MBUF_SZ(c_p); + ASSERT(!ERTS_PROC_IS_EXITING(c_p) || is_non_value(result)); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + ERTS_HOLE_CHECK(c_p); + ERTS_REQ_PROC_MAIN_LOCK(c_p); + if (ERTS_IS_GC_DESIRED(c_p)) { + Uint arity = GET_BIF_ARITY(export); + result = erts_gc_after_bif_call_lhf(c_p, live_hf_end, result, + reg, arity); + E = c_p->stop; + } + PROCESS_MAIN_CHK_LOCKS(c_p); + HTOP = HEAP_TOP(c_p); + FCALLS = c_p->fcalls; + ERTS_DBG_CHK_REDS(c_p, FCALLS); + /* We have to update the cache if we are enabled in order + to make sure no book keeping is done after we disabled + msacc. We don't always do this as it is quite expensive. */ + if (ERTS_MSACC_IS_ENABLED_CACHED_X()) { + ERTS_MSACC_UPDATE_CACHE_X(); + } + ERTS_MSACC_SET_STATE_CACHED_M_X(ERTS_MSACC_STATE_EMULATOR); + if (ERTS_LIKELY(is_value(result))) { + r(0) = result; + CHECK_TERM(r(0)); + $NEXT0(); + } else if (c_p->freason == TRAP) { + SET_CP(c_p, I+2); + SET_I(c_p->i); + SWAPIN; + Dispatch(); + } + + /* + * Error handling. SWAPOUT is not needed because it was done above. + */ + ASSERT(c_p->stop == E); + I = handle_error(c_p, I, reg, &export->info.mfa); + goto post_error_handling; +} + +// +// Send is almost a standard call-BIF with two arguments, except for: +// 1. It cannot be traced. +// 2. There is no pointer to the send_2 function stored in +// the instruction. +// + +send() { + Eterm result; + + if (!(FCALLS > 0 || FCALLS > neg_o_reds)) { + /* If we have run out of reductions, we do a context + switch before calling the bif */ + c_p->arity = 2; + c_p->current = NULL; + goto context_switch3; + } + + PRE_BIF_SWAPOUT(c_p); + c_p->fcalls = FCALLS - 1; + result = erl_send(c_p, r(0), x(1)); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + ERTS_REQ_PROC_MAIN_LOCK(c_p); + PROCESS_MAIN_CHK_LOCKS(c_p); + HTOP = HEAP_TOP(c_p); + FCALLS = c_p->fcalls; + if (ERTS_LIKELY(is_value(result))) { + r(0) = result; + CHECK_TERM(r(0)); + } else if (c_p->freason == TRAP) { + SET_CP(c_p, I+1); + SET_I(c_p->i); + SWAPIN; + Dispatch(); + } else { + goto find_func_info; + } +} + +call_nif := nif_bif.call_nif.epilogue; +apply_bif := nif_bif.apply_bif.epilogue; + +nif_bif.head() { + Eterm nif_bif_result; + Eterm bif_nif_arity; + BifFunction vbf; + ErlHeapFragment *live_hf_end; + ErtsCodeMFA *codemfa; +} + +nif_bif.call_nif() { + /* + * call_nif is always first instruction in function: + * + * I[-3]: Module + * I[-2]: Function + * I[-1]: Arity + * I[0]: &&call_nif + * I[1]: Function pointer to NIF function + * I[2]: Pointer to erl_module_nif + * I[3]: Function pointer to dirty NIF + * + * This layout is determined by the NifExport struct + */ + + ERTS_MSACC_SET_STATE_CACHED_M_X(ERTS_MSACC_STATE_NIF); + + codemfa = erts_code_to_codemfa(I); + + c_p->current = codemfa; /* current and vbf set to please handle_error */ + + DTRACE_NIF_ENTRY(c_p, codemfa); + + HEAVY_SWAPOUT; + + PROCESS_MAIN_CHK_LOCKS(c_p); + bif_nif_arity = codemfa->arity; + ERTS_UNREQ_PROC_MAIN_LOCK(c_p); + + ASSERT(!ERTS_PROC_IS_EXITING(c_p)); + { + typedef Eterm NifF(struct enif_environment_t*, int argc, Eterm argv[]); + NifF* fp = vbf = (NifF*) I[1]; + struct enif_environment_t env; + ASSERT(c_p->scheduler_data); + live_hf_end = c_p->mbuf; + ERTS_CHK_MBUF_SZ(c_p); + erts_pre_nif(&env, c_p, (struct erl_module_nif*)I[2], NULL); + nif_bif_result = (*fp)(&env, bif_nif_arity, reg); + if (env.exception_thrown) + nif_bif_result = THE_NON_VALUE; + erts_post_nif(&env); + ERTS_CHK_MBUF_SZ(c_p); + + PROCESS_MAIN_CHK_LOCKS(c_p); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + ERTS_MSACC_SET_STATE_CACHED_M_X(ERTS_MSACC_STATE_EMULATOR); + ASSERT(!env.exiting); + ASSERT(!ERTS_PROC_IS_EXITING(c_p)); + } + + DTRACE_NIF_RETURN(c_p, codemfa); +} + +nif_bif.apply_bif() { + /* + * At this point, I points to the code[0] in the export entry for + * the BIF: + * + * code[-3]: Module + * code[-2]: Function + * code[-1]: Arity + * code[0]: &&apply_bif + * code[1]: Function pointer to BIF function + */ + + if (!((FCALLS - 1) > 0 || (FCALLS - 1) > neg_o_reds)) { + /* If we have run out of reductions, we do a context + switch before calling the bif */ + goto context_switch; + } + + codemfa = erts_code_to_codemfa(I); + + ERTS_MSACC_SET_BIF_STATE_CACHED_X(codemfa->module, (BifFunction)Arg(0)); + + + /* In case we apply process_info/1,2 or load_nif/1 */ + c_p->current = codemfa; + $SET_CP_I_ABS(I); /* In case we apply check_process_code/2. */ + c_p->arity = 0; /* To allow garbage collection on ourselves + * (check_process_code/2). + */ + DTRACE_BIF_ENTRY(c_p, codemfa); + + SWAPOUT; + ERTS_DBG_CHK_REDS(c_p, FCALLS - 1); + c_p->fcalls = FCALLS - 1; + vbf = (BifFunction) Arg(0); + PROCESS_MAIN_CHK_LOCKS(c_p); + bif_nif_arity = codemfa->arity; + ASSERT(bif_nif_arity <= 4); + ERTS_UNREQ_PROC_MAIN_LOCK(c_p); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + { + ErtsBifFunc bf = vbf; + ASSERT(!ERTS_PROC_IS_EXITING(c_p)); + live_hf_end = c_p->mbuf; + ERTS_CHK_MBUF_SZ(c_p); + nif_bif_result = (*bf)(c_p, reg, I); + ERTS_CHK_MBUF_SZ(c_p); + ASSERT(!ERTS_PROC_IS_EXITING(c_p) || + is_non_value(nif_bif_result)); + ERTS_VERIFY_UNUSED_TEMP_ALLOC(c_p); + PROCESS_MAIN_CHK_LOCKS(c_p); + } + /* We have to update the cache if we are enabled in order + to make sure no book keeping is done after we disabled + msacc. We don't always do this as it is quite expensive. */ + if (ERTS_MSACC_IS_ENABLED_CACHED_X()) + ERTS_MSACC_UPDATE_CACHE_X(); + ERTS_MSACC_SET_STATE_CACHED_M_X(ERTS_MSACC_STATE_EMULATOR); + DTRACE_BIF_RETURN(c_p, codemfa); +} + +nif_bif.epilogue() { + ERTS_REQ_PROC_MAIN_LOCK(c_p); + ERTS_HOLE_CHECK(c_p); + if (ERTS_IS_GC_DESIRED(c_p)) { + nif_bif_result = erts_gc_after_bif_call_lhf(c_p, live_hf_end, + nif_bif_result, + reg, bif_nif_arity); + } + SWAPIN; /* There might have been a garbage collection. */ + FCALLS = c_p->fcalls; + ERTS_DBG_CHK_REDS(c_p, FCALLS); + if (ERTS_LIKELY(is_value(nif_bif_result))) { + r(0) = nif_bif_result; + CHECK_TERM(r(0)); + SET_I(c_p->cp); + c_p->cp = 0; + Goto(*I); + } else if (c_p->freason == TRAP) { + SET_I(c_p->i); + if (c_p->flags & F_HIBERNATE_SCHED) { + c_p->flags &= ~F_HIBERNATE_SCHED; + goto do_schedule; + } + Dispatch(); + } + I = handle_error(c_p, c_p->cp, reg, c_p->current); + goto post_error_handling; +} |