diff options
Diffstat (limited to 'erts/etc/unix/etp-commands')
| -rw-r--r-- | erts/etc/unix/etp-commands | 763 |
1 files changed, 689 insertions, 74 deletions
diff --git a/erts/etc/unix/etp-commands b/erts/etc/unix/etp-commands index 1c886620bb..46d35a7f76 100644 --- a/erts/etc/unix/etp-commands +++ b/erts/etc/unix/etp-commands @@ -1263,7 +1263,684 @@ document etpf-stackdump %--------------------------------------------------------------------------- end +define etp-pix2proc +# Args: Eterm +# + set $proc = (Process *) *((UWord *) &erts_proc.tab[((int) $arg0)]) + printf "(Process *) %p\n", $proc +end + +define etp-pid2proc-1 +# Args: Eterm +# + set $pix = (int) ($arg0 >> 4) + + if (erts_proc.pix_cl_mask != 0) + set $proc = (Process *) *((UWord *) &erts_proc.tab[(((($pix) & erts_proc.pix_cl_mask) << erts_proc.pix_cl_shift) + ((($pix) >> erts_proc.pix_cli_shift) & erts_proc.pix_cli_mask))]) + else + set $proc =(Process *) *((UWord *) &erts_proc.tab[((($pix) % erts_proc.max) % erts_proc.tab_cache_lines + (($pix) % erts_proc.max) / erts_proc.tab_cache_lines)]) + end +end + +define etp-pid2proc +# Args: Eterm +# + etp-pid2proc-1 $arg0 + printf "(Process *) %p\n", $proc +end + +define etp-proc-state-int +# Args: int +# + if ($arg0 & 0xfffff000) + printf "GARBAGE | " + end + if ($arg0 & 0x800) + printf "trapping-exit | " + end + if ($arg0 & 0x400) + printf "bound | " + end + if ($arg0 & 0x200) + printf "garbage-collecting | " + end + if ($arg0 & 0x100) + printf "suspended | " + end + if ($arg0 & 0x80) + printf "running | " + end + if ($arg0 & 0x40) + printf "in-run-queue | " + end + if ($arg0 & 0x20) + printf "active | " + end + if ($arg0 & 0x10) + printf "pending-exit | " + end + if ($arg0 & 0x8) + printf "exiting | " + end + if ($arg0 & 0x4) + printf "free | " + end + if ($arg0 & 0x3) == 0 + printf "prio-max\n" + else + if ($arg0 & 0x3) == 1 + printf "prio-high\n" + else + if ($arg0 & 0x3) == 2 + printf "prio-normal\n" + else + printf "prio-low\n" + end + end + end +end + +document etp-proc-state-int +%--------------------------------------------------------------------------- +% etp-proc-state-int int +% +% Print state of process state value +%--------------------------------------------------------------------------- +end + + +define etp-proc-state +# Args: Process* +# + set $state_int = *(((Uint32 *) &(((Process *) $arg0)->state))) + etp-proc-state-int $state_int +end + +document etp-proc-state +%--------------------------------------------------------------------------- +% etp-proc-state Process* +% +% Print state of process +%--------------------------------------------------------------------------- +end + +define etp-process-info +# Args: Process* +# + printf " Pid: " + etp-1 $arg0->id + printf "\n State: " + etp-proc-state $arg0 + if ($arg0->reg) + printf " Registered name: " + etp-1 $arg0->reg->name + printf "\n" + end + if ($arg0->current) + printf " Current function: " + etp-1 $arg0->current[0] + printf ":" + etp-1 $arg0->current[1] + printf "/%d\n", $arg0->current[2] + end + if ($arg0->cp) + printf " CP: " + etp-cp-1 $arg0->cp + printf "\n" + end + if ($arg0->i) + printf " I: " + etp-cp-1 $arg0->i + printf "\n" + end + printf " Heap size: %ld\n", $arg0->heap_sz + if ($arg0->old_heap) + printf " Old-heap size: %ld\n", $arg0->old_hend - $arg0->old_heap + end + printf " Mbuf size: %ld\n", $arg0->mbuf_sz + if (etp_smp_compiled) + printf " Msgq len: %ld (inner=%ld, outer=%ld)\n", ($arg0->msg.len + $arg0->msg_inq.len), $arg0->msg.len, $arg0->msg_inq.len + else + printf " Msgq len: %d\n", $arg0->msg.len + end + printf " Parent: " + etp-1 $arg0->parent + printf "\n Pointer: (Process *) %p\n", $arg0 +end + +document etp-process-info +%--------------------------------------------------------------------------- +% etp-process-info Process* +% +% Print info about process +%--------------------------------------------------------------------------- +end + +define etp-processes + if (!erts_initialized) + printf "No processes, since system isn't initialized!\n" + else + set $proc_ix = 0 + while $proc_ix < erts_proc.max + set $proc = (Process *) *((UWord *) &erts_proc.tab[$proc_ix]) + if ($proc != (Process *) 0) + printf "---\n" + printf " Pix: %d\n", $proc_ix + etp-process-info $proc + end + set $proc_ix++ + end + printf "---\n", + end +end + +document etp-processes +%--------------------------------------------------------------------------- +% etp-processes +% +% Print misc info about all processes +%--------------------------------------------------------------------------- +end + + +define etp-port-status-int +# Args: int +# + if ($arg0 & 0x1) + printf " connected" + end + if ($arg0 & 0x2) + printf " exiting" + end + if ($arg0 & 0x4) + printf " distribution" + end + if ($arg0 & 0x8) + printf " binary-io" + end + if ($arg0 & 0x10) + printf " soft-eof" + end + if ($arg0 & 0x20) + printf " port-busy" + end + if ($arg0 & 0x40) + printf " closing" + end + if ($arg0 & 0x80) + printf " send-closed" + end + if ($arg0 & 0x100) + printf " linebuf-io" + end + if ($arg0 & 0x200) + printf " immortal" + end + if ($arg0 & 0x400) + printf " free" + end + if ($arg0 & 0x800) + printf " free-scheduled" + end + if ($arg0 & 0x1000) + printf " initializing" + end + if ($arg0 & 0x2000) + printf " port-specific-lock" + end + if ($arg0 & 0x4000) + printf " invalid" + end + if (etp_debug_compiled) + if ($arg0 & 0x7fff8000) + printf " GARBAGE" + end + else + if ($arg0 & 0xffff8000) + printf " GARBAGE" + end + end + printf "\n" +end + +document etp-port-status-int +%--------------------------------------------------------------------------- +% etp-proc-state-int int +% +% Print port status +%--------------------------------------------------------------------------- +end + + +define etp-port-status +# Args: Port* +# + set $status_int = *(((Uint32 *) &(((Port *) $arg0)->status))) + etp-port-status-int $status_int +end + +document etp-port-status +%--------------------------------------------------------------------------- +% etp-proc-state-int Port * +% +% Print port status +%--------------------------------------------------------------------------- +end + +define etp-port-info +# Args: Port* +# + printf " Port: " + etp-1 $arg0->id + printf "\n Name: %s\n", $arg0->name + printf " Status:" + etp-port-status $arg0 + if ($arg0->reg) + printf " Registered name: " + etp-1 $arg0->reg->name + printf "\n" + end + printf " Connected: " + etp-1 $arg0->connected + printf "\n Pointer: (Port *) %p\n", $arg0 +end + +document etp-port-info +%--------------------------------------------------------------------------- +% etp-port-info Port* +% +% Print info about port +%--------------------------------------------------------------------------- +end + + +define etp-ports + if (!erts_initialized) + printf "No ports, since system isn't initialized!\n" + else + set $port_ix = 0 + while $port_ix < erts_max_ports + set $port = &erts_port[$port_ix] + if ($port->status & 0x400) == 0 + # I.e, not free + printf "---\n" + printf " Pix: %d\n", $port_ix + etp-port-info $port + end + set $port_ix++ + end + printf "---\n", + end +end + +document etp-ports +%--------------------------------------------------------------------------- +% etp-ports +% +% Print misc info about all ports +%--------------------------------------------------------------------------- +end + +define etp-rq-flags-int +# Args: int +# + if ($arg0 & 0x1f) + printf " Queue Mask:" + if ($arg0 & 0x1) + printf " max" + end + if ($arg0 & 0x2) + printf " high" + end + if ($arg0 & 0x4) + printf " normal" + end + if ($arg0 & 0x8) + printf " low" + end + if ($arg0 & 0x10) + printf " ports" + end + printf "\n" + end + + if ($arg0 & 0x3fe0) + printf " Emigrate Mask:" + if ($arg0 & 0x20) + printf " max" + end + if ($arg0 & 0x40) + printf " high" + end + if ($arg0 & 0x80) + printf " normal" + end + if ($arg0 & 0x100) + printf " low" + end + if ($arg0 & 0x200) + printf " ports" + end + printf "\n" + end + + if ($arg0 & 0x7fc00) + printf " Immigrate Mask:" + if ($arg0 & 0x400) + printf " max" + end + if ($arg0 & 0x800) + printf " high" + end + if ($arg0 & 0x1000) + printf " normal" + end + if ($arg0 & 0x2000) + printf " low" + end + if ($arg0 & 0x4000) + printf " ports" + end + printf "\n" + end + + if ($arg0 & 0xf8000) + printf " Evaquate Mask:" + if ($arg0 & 0x8000) + printf " max" + end + if ($arg0 & 0x10000) + printf " high" + end + if ($arg0 & 0x20000) + printf " normal" + end + if ($arg0 & 0x40000) + printf " low" + end + if ($arg0 & 0x80000) + printf " ports" + end + printf "\n" + end + + if ($arg0 & ~0xfffff) + printf " Misc Flags:" + if ($arg0 & 0x100000) + printf " out-of-work" + end + if ($arg0 & 0x200000) + printf " halftime-out-of-work" + end + if ($arg0 & 0x400000) + printf " suspended" + end + if ($arg0 & 0x800000) + printf " check-cpu-bind" + end + if ($arg0 & 0x1000000) + printf " inactive" + end + if ($arg0 & 0x2000000) + printf " non-empty" + end + if ($arg0 & 0x4000000) + printf " protected" + end + if ($arg0 & ~0x7ffffff) + printf " GARBAGE(0x%x)", ($arg0 & ~0x3ffffff) + end + printf "\n" + end +end + +document etp-rq-flags-int +%--------------------------------------------------------------------------- +% etp-rq-flags-int +% +% Print run queue flags +%--------------------------------------------------------------------------- +end + +define etp-ssi-flags +# Args: int +# + if ($arg0 & 0x1) + printf " sleeping" + end + if ($arg0 & 0x2) + printf " poll" + end + if ($arg0 & 0x4) + printf " tse" + end + if ($arg0 & 0x8) + printf " waiting" + end + if ($arg0 & 0x10) + printf " suspended" + end + printf "\n" +end + +document etp-ssi-flags +%--------------------------------------------------------------------------- +% etp-ssi-flags +% Arg int +% +% Print aux work flags +%--------------------------------------------------------------------------- +end + +define etp-aux-work-flags +# Args: int +# + if ($arg0 & 0x1) + printf " delayed-dealloc" + end + if ($arg0 & 0x2) + printf " delayed-dealloc-thr-prgr" + end + if ($arg0 & 0x4) + printf " fix-alloc-dealloc" + end + if ($arg0 & 0x8) + printf " fix-alloc-lower-lim" + end + if ($arg0 & 0x10) + printf " async-ready" + end + if ($arg0 & 0x20) + printf " async-ready-clean" + end + if ($arg0 & 0x40) + printf " misc-work-thr-prgr" + end + if ($arg0 & 0x80) + printf " misc-work" + end + if ($arg0 & 0x100) + printf " check-children" + end + if ($arg0 & 0x200) + printf " set-tmo" + end + if ($arg0 & 0x400) + printf " mseg-cached-check" + end + if ($arg0 & ~0x7ff) + printf " GARBAGE" + end + printf "\n" +end + +document etp-aux-work-flags +%--------------------------------------------------------------------------- +% etp-aux-work-flags +% Arg int +% +% Print aux work flags +%--------------------------------------------------------------------------- +end + +define etp-schedulers + if (!erts_initialized) + printf "No schedulers, since system isn't initialized!\n" + else + set $sched_ix = 0 + while $sched_ix < erts_no_schedulers + printf "--- Scheduler %d ---\n", $sched_ix+1 + printf " IX: %d\n", $sched_ix + if (erts_aligned_scheduler_data[$sched_ix].esd.cpu_id < 0) + printf " CPU Binding: unbound\n" + else + printf " CPU Binding: %d\n", erts_aligned_scheduler_data[$sched_ix].esd.cpu_id + end + printf " Aux work Flags:" + set $aux_work_flags = *((Uint32 *) &erts_aligned_scheduler_data[$sched_ix].esd.ssi->aux_work) + etp-aux-work-flags $aux_work_flags + printf " Sleep Info Flags:" + set $ssi_flags = *((Uint32 *) &erts_aligned_scheduler_data[$sched_ix].esd.ssi->flags) + etp-ssi-flags $ssi_flags + printf " Pointer: (ErtsSchedulerData *) %p\n", &erts_aligned_scheduler_data[$sched_ix].esd + printf " - Run Queue -\n" + if (etp_smp_compiled) + set $runq = erts_aligned_scheduler_data[$sched_ix].esd.run_queue + else + set $runq = &erts_aligned_run_queues[0].runq + end + printf " Length: total=%d", *((Uint32 *) &($runq->len)) + printf ", max=%d", *((Uint32 *) &($runq->procs.prio_info[0].len)) + printf ", high=%d", *((Uint32 *) &($runq->procs.prio_info[1].len)) + printf ", normal=%d", *((Uint32 *) &($runq->procs.prio_info[2].len)) + printf ", low=%d", *((Uint32 *) &($runq->procs.prio_info[3].len)) + printf ", port=%d\n", *((Uint32 *) &($runq->ports.info.len)) + if ($runq->misc.start) + printf " Misc Jobs: yes\n" + else + printf " Misc Jobs: no\n" + end + set $rq_flags = *((Uint32 *) &($runq->flags)) + etp-rq-flags-int $rq_flags + printf " Pointer: (ErtsRunQueue *) %p\n", $runq + + set $sched_ix++ + end + printf "-------------------\n", + end +end + +document etp-schedulers +%--------------------------------------------------------------------------- +% etp-schedulers +% +% Print misc info about all schedulers +%--------------------------------------------------------------------------- +end + +define etp-migration-info + set $minfo = (ErtsMigrationPaths *) *((UWord *) &erts_migration_paths) + set $rq_ix = 0 + while $rq_ix < erts_no_run_queues + if ($minfo->mpath[$rq_ix]) + printf "---\n" + printf "Run Queue Ix: %d\n", $rq_ix + etp-rq-flags-int $minfo->mpath[$rq_ix].flags + end + set $rq_ix++ + end +end +document etp-migration-info +%--------------------------------------------------------------------------- +% etp-migration-info +% +% Print migration information +%--------------------------------------------------------------------------- +end + +define etp-system-info + printf "--------------- System Information ---------------\n" + printf "OTP release: %s\n", etp_otp_release + printf "ERTS version: %s\n", etp_erts_version + printf "Compile date: %s\n", etp_compile_date + printf "Arch: %s\n", etp_arch + printf "Word size: %d-bit\n", etp_arch_bits + printf "Halfword: " + if (etp_halfword) + printf "yes\n" + else + printf "no\n" + end + printf "HiPE support: " + if (etp_hipe) + printf "yes\n" + else + printf "no\n" + end + if (etp_smp_compiled) + printf "SMP support: yes\n" + else + printf "SMP support: no\n" + end + printf "Thread support: " + if (etp_thread_compiled) + printf "yes\n" + else + printf "no\n" + end + printf "Kernel poll: " + if (etp_kernel_poll_support) + if (!erts_initialized) + printf "Supported\n" + else + if (erts_use_kernel_poll) + printf "Supported and used\n" + else + printf "Supported but not used\n" + end + end + else + printf "No support\n" + end + printf "Debug compiled: " + if (etp_debug_compiled) + printf "yes\n" + else + printf "no\n" + end + printf "Lock checking: " + if (etp_lock_check) + printf "yes\n" + else + printf "no\n" + end + printf "Lock counting: " + if (etp_lock_count) + printf "yes\n" + else + printf "no\n" + end + + if (!erts_initialized) + printf "System not initialized\n" + else + printf "Node name: " + etp-1 erts_this_node->sysname + printf "\n" + printf "Number of schedulers: %d\n", erts_no_schedulers + printf "Number of async-threads: %d\n", erts_async_max_threads + end + printf "--------------------------------------------------\n" +end + +document etp-system-info +%--------------------------------------------------------------------------- +% etp-system-info +% +% Print general information about the system +%--------------------------------------------------------------------------- +end define etp-dictdump # Args: ProcDict* @@ -1407,69 +2084,6 @@ document etpf-offheapdump %--------------------------------------------------------------------------- end -define etp-print-procs -# Args: Eterm -# -# Non-reentrant -# - etp-print-procs-1 -end - -define etp-print-procs-1 -# Args: Eterm* -# -# Non-reentrant -# - set $etp_print_procs_q = erts_max_processes / 10 - set $etp_print_procs_r = erts_max_processes % 10 - set $etp_print_procs_t = 10 - set $etp_print_procs_m = $etp_print_procs_q - if $etp_print_procs_r > 0 - set $etp_print_procs_m++ - set $etp_print_procs_r-- - end - set $etp_print_procs_i = 0 - set $etp_print_procs_found = 0 - while $etp_print_procs_i < erts_max_processes - if process_tab[$etp_print_procs_i] - printf "%d: ", $etp_print_procs_i - etp-1 process_tab[$etp_print_procs_i]->id - printf " " - etp-1 ((Eterm)(process_tab[$etp_print_procs_i]->i)) - printf " heap=%d/%d(%d)", process_tab[$etp_print_procs_i]->htop - process_tab[$etp_print_procs_i]->heap, \ - process_tab[$etp_print_procs_i]->hend - process_tab[$etp_print_procs_i]->heap, \ - process_tab[$etp_print_procs_i]->hend - process_tab[$etp_print_procs_i]->stop - printf " old=%d/%d ", process_tab[$etp_print_procs_i]->old_htop - process_tab[$etp_print_procs_i]->old_heap, \ - process_tab[$etp_print_procs_i]->old_hend - process_tab[$etp_print_procs_i]->old_heap - printf " mbuf_sz=%d ", process_tab[$etp_print_procs_i]->mbuf_sz - printf " min=%d ", process_tab[$etp_print_procs_i]->min_heap_size - printf " flags=%x ", process_tab[$etp_print_procs_i]->flags - printf " msgs=%d ", process_tab[$etp_print_procs_i]->msg.len - printf "\n" - end - set $etp_print_procs_i++ - if $etp_print_procs_i > $etp_print_procs_m - printf "%% %d%%...\n", $etp_print_procs_t - set $etp_print_procs_t += 10 - set $etp_print_procs_m += $etp_print_procs_q - if $etp_print_procs_r > 0 - set $etp_print_procs_m++ - set $etp_print_procs_r-- - end - end - end - printf "%% 100%%.\n" -end - -document etp-print-procs -%--------------------------------------------------------------------------- -% etp-print-procs Eterm -% -% Print some information about ALL processes. -%--------------------------------------------------------------------------- -end - - define etp-search-heaps # Args: Eterm # @@ -1498,20 +2112,21 @@ define etp-search-heaps-1 end set $etp_search_heaps_i = 0 set $etp_search_heaps_found = 0 - while $etp_search_heaps_i < erts_max_processes - if process_tab[$etp_search_heaps_i] - if (process_tab[$etp_search_heaps_i]->heap <= ($arg0)) && \ - (($arg0) < process_tab[$etp_search_heaps_i]->hend) + while $etp_search_heaps_i < erts_proc.max + set $proc = (Process *) *((UWord *) &erts_proc.tab[$proc_ix]) + if $proc + if ($proc->heap <= ($arg0)) && \ + (($arg0) < $proc->hend) printf "process_tab[%d]->heap+%d\n", $etp_search_heaps_i, \ - ($arg0)-process_tab[$etp_search_heaps_i]->heap + ($arg0)-$proc->heap end - if (process_tab[$etp_search_heaps_i]->old_heap <= ($arg0)) && \ - (($arg0) <= process_tab[$etp_search_heaps_i]->old_hend) + if ($proc->old_heap <= ($arg0)) && \ + (($arg0) <= $proc->old_hend) printf "process_tab[%d]->old_heap+%d\n", $etp_search_heaps_i, \ - ($arg0)-process_tab[$etp_search_heaps_i]->old_heap + ($arg0)-$proc->old_heap end set $etp_search_heaps_cnt = 0 - set $etp_search_heaps_p = process_tab[$etp_search_heaps_i]->mbuf + set $etp_search_heaps_p = $proc->mbuf while $etp_search_heaps_p && ($etp_search_heaps_cnt < $etp_max_depth) set $etp_search_heaps_cnt++ if (&($etp_search_heaps_p->mem) <= ($arg0)) && \ @@ -1523,7 +2138,7 @@ define etp-search-heaps-1 set $etp_search_heaps_p = $etp_search_heaps_p->next end if $etp_search_heaps_p - printf "process_tab[%d] %% Too many HeapFragments\n", \ + printf "Process ix=%d %% Too many HeapFragments\n", \ $etp_search_heaps_i end end @@ -2070,7 +2685,7 @@ document etp-init %--------------------------------------------------------------------------- end - etp-init help etp-init etp-show +etp-system-info |