| Age | Commit message (Collapse) | Author |
|---|
|
The old time API is based on erlang:now/0. The major issue with
erlang:now/0 is that it was intended to be used for so many
unrelated things. This tied these unrelated operations together
and unnecessarily caused performance, scalability as well as
accuracy, and precision issues for operations that do not need
to have such issues. The new API spreads different functionality
over multiple functions in order to improve on this.
The new API consists of a number of new BIFs:
- erlang:convert_time_unit/3
- erlang:monotonic_time/0
- erlang:monotonic_time/1
- erlang:system_time/0
- erlang:system_time/1
- erlang:time_offset/0
- erlang:time_offset/1
- erlang:timestamp/0
- erlang:unique_integer/0
- erlang:unique_integer/1
- os:system_time/0
- os:system_time/1
and a number of extensions of existing BIFs:
- erlang:monitor(time_offset, clock_service)
- erlang:system_flag(time_offset, finalize)
- erlang:system_info(os_monotonic_time_source)
- erlang:system_info(time_offset)
- erlang:system_info(time_warp_mode)
- erlang:system_info(time_correction)
- erlang:system_info(start_time)
See the "Time and Time Correction in Erlang" chapter of the
ERTS User's Guide for more information.
|
|
Conflicts:
OTP_VERSION
|
|
Need to include sys/ioctl.h for TIOCSWINSZ to be defined.
Seems this was broken when refactoring run_erl for OSE in OTP 17.0.
|
|
rickard/maint-17/eager-check-io/OTP-12117
* rickard/eager-check-io/OTP-12117:
Introduce support for eager check I/O scheduling
Conflicts:
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_init.c
erts/emulator/beam/erl_process.c
erts/preloaded/ebin/erlang.beam
|
|
|
|
|
|
* lukas/ose/master-17.0/OTP-11334:
ose: Fix erts assert failed printouts
ose: fix for packet_bytes in fd/spawn driver.
ose: Prepare slave for running on OSE
ose: Fix bug when hunting for signal proxy
ose: Implement tcp inet driver for OSE
ose: Add ifdefs for HAVE_UDP
ose: Yielding has to be done differently for background processes.
ose: Print faults in aio sys driver calls
ose: Prinout errno when to_erl read fails
ose: erlang display goes to ramlog printf
ose: Initiate stdin/stdout/stderr
ose: Break lmconf into one per load module
ose: Reset busy port when pdq empty
ose: Restore the owner of the signal
|
|
|
|
|
|
Enable a cross compile Erlang/OTP platform to Android or Raspberry PI
using Android NDK. Port emulator and core application to support target
HW platform. Exclude any add-on services required for OTP platform deployment
into target hardware due to device fragmentation and jail-break requirements.
* fix erts/emulator/beam/sys.h
Disable redefinition of __noreturn macro
* port erts/emulator/sys/unix/erl_child_setup.c
Use techniques proposed by https://code.google.com/p/erlang4android to
access system properties
* fix erts/emulator/sys/unix/erl_unix_sys_ddll.c
The static linking of emulator cannot find dlerror(), dlopen() symbols
* port erts/emulator/sys/unix/sys.c
make path to shell configurable at build time
* port erts/etc/common/Makefile.in
disable librt for *-linux-androideabi
* port erts/lib_src/pthread/ethread.c
Use techniques proposed by https://code.google.com/p/erlang4android to
disable emulator crash if kernel threads are on. Replace unreliable
pthread_sigmask() by sigprocmask()
* port lib/erl_interface/src/connect/ei_connect.c
Disable call to undefined gethostid()
* port lib/erl_interface/src/connect/ei_resolve.c
Use gethostbyname_r() on Android platform
|
|
* lukas/ose/master/OTP-11334: (71 commits)
erts: Fix unix efile assert
ose: Use -O2 when building
ose: Expand OSE docs
ose: Add dummy ttsl driver
ose: Cleanup cleanup of mutex selection defines
ose: Polish mmap configure checks
ose: Add ose specific x-compile flags
ose: Updating fd_driver and spawn_driver for OSE
ose: Updating event and signal API for OSE
ose: Cleanup of mutex selection defines
win32: Compile erl_log.exe
ose: Remove uneccesary define
ose: Fix ssl configure test for osx
erts: Fix sys_msg_dispatcher assert
ose: Fix broken doc links
ose: Thread priorities configurable from lmconf
ose: Yielding the cpu is done "the OSE" way
ose: Start using ppdata for tse key
ose: Do not use spinlocks on OSE
ose: Fix support for crypto
...
Conflicts:
lib/crypto/c_src/crypto.c
|
|
|
|
erl_log is used together with debug emulator.
Use 'erl -debug -console' to get a denug console.
|
|
This is needed because when starting multiple processes
from the same shell command they will see the same
global data if using status variables.
|
|
|
|
This is in preperation for writing ose version of run_erl and to_erl
|
|
This port has support for both non-smp and smp.
It contains a new way to do io checking in which erts_poll_wait
receives the payload of the polled entity. This has implications
for all linked-in drivers.
|
|
* vinoski/ds2:
further enhancements for dirty schedulers
allow optional whitespace in dirty scheduler erl options
|
|
To make the result executable as is the case for erl.src.
|
|
The +SDcpu, +SDPcpu, and +SDio options did not properly handle having their
arguments immediately following them without intervening whitespace,
e.g. +SDio20 was treated as an error. Fix all the dirty scheduler command
line options so they handle optional whitespace between them and their
associated arguments.
|
|
Add initial support for dirty schedulers.
There are two types of dirty schedulers: CPU schedulers and I/O
schedulers. By default, there are as many dirty CPU schedulers as there are
normal schedulers and as many dirty CPU schedulers online as normal
schedulers online. There are 10 dirty I/O schedulers (similar to the choice
of 10 as the default for async threads).
By default, dirty schedulers are disabled and conditionally compiled
out. To enable them, you must pass --enable-dirty-schedulers to the
top-level configure script when building Erlang/OTP.
Current dirty scheduler support requires the emulator to be built with SMP
support. This restriction will be lifted in the future.
You can specify the number of dirty schedulers with the command-line
options +SDcpu (for dirty CPU schedulers) and +SDio (for dirty I/O
schedulers). The +SDcpu option is similar to the +S option in that it takes
two numbers separated by a colon: C1:C2, where C1 specifies the number of
dirty schedulers available and C2 specifies the number of dirty schedulers
online. The +SDPcpu option allows numbers of dirty CPU schedulers available
and dirty CPU schedulers online to be specified as percentages, similar to
the existing +SP option for normal schedulers. The number of dirty CPU
schedulers created and dirty CPU schedulers online may not exceed the
number of normal schedulers created and normal schedulers online,
respectively. The +SDio option takes only a single number specifying the
number of dirty I/O schedulers available and online. There is no support
yet for programmatically changing at run time the number of dirty CPU
schedulers online via erlang:system_flag/2. Also, changing the number of
normal schedulers online via erlang:system_flag(schedulers_online,
NewSchedulersOnline) should ensure that there are no more dirty CPU
schedulers than normal schedulers, but this is not yet implemented. You can
retrieve the number of dirty schedulers by passing dirty_cpu_schedulers,
dirty_cpu_schedulers_online, or dirty_io_schedulers to
erlang:system_info/1.
Currently only NIFs are able to access dirty scheduler
functionality. Neither drivers nor BIFs currently support dirty
schedulers. This restriction will be addressed in the future.
If dirty scheduler support is present in the runtime, the initial status
line Erlang prints before presenting its interactive prompt will include
the indicator "[ds:C1:C2:I]" where "ds" indicates "dirty schedulers", "C1"
indicates the number of dirty CPU schedulers available, "C2" indicates the
number of dirty CPU schedulers online, and "I" indicates the number of
dirty I/O schedulers.
Document The dirty NIF API in the erl_nif man page. The API closely follows
Rickard Green's presentation slides from his talk "Future Extensions to the
Native Interface", presented at the 2011 Erlang Factory held in the San
Francisco Bay Area. Rickard's slides are available online at
http://bit.ly/1m34UHB .
Document the new erl command-line options, the additions to
erlang:system_info/1, and also add the erlang:system_flag/2 dirty scheduler
documentation even though it's not yet implemented.
To determine whether the dirty NIF API is available, native code can check
to see whether the C preprocessor macro ERL_NIF_DIRTY_SCHEDULER_SUPPORT is
defined. To check if dirty schedulers are available at run time, native
code can call the boolean enif_have_dirty_schedulers() function, and Erlang
code can call erlang:system_info(dirty_cpu_schedulers), which raises
badarg if no dirty scheduler support is available.
Add a simple dirty NIF test to the emulator NIF suite.
|
|
For more information see documentation of the new command line argument +sub
|
|
|
|
Update versions of OTP, erts, kernel, and stdlib to comply with
the new version scheme decided by the OTP technical board.
|
|
* maint:
Fix observer retrieval of alloc info
Fix documentation of the +MMsco switch
Replace the +MMscmgc switch with +MMscrfsd
Add switch for disabling sys_alloc carriers
Add support for locking mappings to physical memory
|
|
Replaced the +MMscmgc switch with the +MMscrfsd switch. The old switch
didn't reflect what it controlled.
|
|
The switch "+Musac <boolean>" controls if sys_alloc carriers
are allowed.
|
|
Using "+Mlpm all" switch all mappings made by the emulator will
be locked into physical memory.
|
|
Conflicts:
erts/preloaded/ebin/erlang.beam
|
|
* Coalescing and trimming of free segments in supercarrier
* Management of super aligned and super unaligned areas in
supercarrier
* Management of reservation of physical memory
* erts_mseg usage of erts_mmap
|
|
|
|
The 'erlc' program passes options to the 'erl' program using
the '-s' option. The '-s' option causes all options to be converted
to atoms, which implies that UTF-8 file names may not be given on
the command line.
We could solve just the UTF-8 problem by using '-run' and change
the erl_compile module to expect strings instead of atoms, but since
that is an incompatible change, we should take the opportunity to
make more incompatible changes while we are at it.
Specifically, when 'erlc' was first written, there was no way to pass
command line arguments starting with '-' to Erlang, so 'erlc' did all
parsing of arguments and translated options to atoms starting with a
'@' character (for example, -I was translated to @i). Since then,
the '-extra' option has been introduced which allows us to pass
anything to Erlang at the end of the command line.
Therefore, while at it, do the minimum of necessary command line
parsing in the 'erlc' program (e.g. the '-smp' option), passing the
command line essentially unchanged to 'erl' using the '-extra' option,
and rewrite the option parsing in Erlang.
|
|
|
|
|
|
* maint:
add erl option to set schedulers by percentages
|
|
For applications where measurements show enhanced performance from the use
of a non-default number of emulator scheduler threads, having to accurately
set the right number of scheduler threads across multiple hosts each with
different numbers of logical processors is difficult because the erl +S
option requires absolute numbers of scheduler threads and scheduler threads
online to be specified.
To address this issue, add a +SP option to erl, similar to the existing +S
option but allowing the number of scheduler threads and scheduler threads
online to be set as percentages of logical processors configured and
logical processors available, respectively. For example, "+SP 50:25" sets
the number of scheduler threads to 50% of the logical processors
configured, and the number of scheduler threads online to 25% of the
logical processors available. The +SP option also interacts with any
settings specified with the +S option, such that the combination of options
"+S 4:4 +SP 50:50" (in either order) results in 2 scheduler threads and 2
scheduler threads online.
Add documentation for the +SP option.
Add tests for the +SP option to scheduler_SUITE.
Add tests and documentation for two existing features of the +S option: +S
0:0 resets the scheduler thread count and scheduler threads online count to
their defaults, and specifying negative numbers for +S results in those
values being subtracted from the default values for the host.
|
|
* maint:
erts: Add the +sfwi system flag
|
|
+sfwi Interval
Set scheduler forced wakeup interval. All run queues will be scanned
each Interval milliseconds. While there are sleeping schedulers in
the system, one scheduler will be woken for each non-empty run queue
found. An Interval of zero disables this feature, which also is the
default.
This feature has been introduced as a temporary workaround for lengthy
executing native code, and native code that do not bump reductions
properly in OTP. When these bugs have be fixed the +sfwi flag will
be removed.
|
|
* dgud/win32_unicode:
erts: Windows, convert erlsrv to use widestring
erts: Window start_erl now uses widechars/unicode
Quote windows paths with spaces
Handle space in paths in test Makefiles
erts: Fix windows widestring args and paths in tools
erts: Windows, use widechars for all paths during startup
OTP-11135
|
|
|
|
|
|
Fix erlc, escript, dialyzer, typer, ct_run, heart
and epmd should all be using widestrings on windows
|
|
To enable unicode paths as installation dir and allow
unicode in arguments
|
|
Conflicts:
erts/vsn.mk
|
|
|
|
|
|
|
|
* lukas/common_test/remove_deprecated_run_test/OTP-9052:
Remove the deprecated run_test start program
OTP-10881
|
|
It was replaced by ct_run in R14B.
|
|
|
