| Age | Commit message (Collapse) | Author |
|---|
|
If a fun is defined locally and only used for calls, it can be replaced
with direct calls to the relevant function. This greatly speeds up "named
functions" (which rely on make_fun to recreate themselves) and macros that
wrap their body in a fun.
|
|
This commit improves the bit-syntax match optimization pass,
leveraging the new SSA intermediate format to perform much more
aggressive optimizations. Some highlights:
* Watch contexts can be reused even after being passed to a
function or being used in a try block.
* Sub-binaries are no longer eagerly extracted, making it far
easier to keep "happy paths" free from binary creation.
* Trivial wrapper functions no longer disable context reuse.
|
|
Most of the optimizations in beam_dead have been superseded
by the optimizations in beam_ssa_dead.
The forward/1 pass of beam_dead has been moved to beam_jump.
The beam_split pass splits blocks that contain instructions with
non-zero labels. Because there are no optimizations left that optimize
instructions within blocks, beam_block never needs to put such
instructions into blocks in the first place. beam_split also moved
'move' instructions out block to help beam_dead. That is no longer
necessary since beam_dead no longer exists.
|
|
Add beam_ssa_dead to perform the main optimizations done
by beam_dead:
* Shortcut branches that jump to another block with a branch.
If it can be seen that the second branch will always branch
to a specific block, replace the target of the first branch.
* Combined nested sequences of '=:=' tests and switch
instructions operating on the same variable to a single switch.
Diffing the compiler output, it seems that beam_ssa_dead finds
many more opportunities for optimizations than beam_dead,
although it does not find all opportunities that beam_dead does.
In total, beam_ssa_dead is such improvement over beam_dead that
there is no reason to keep beam_dead as well as beam_ssa_dead.
Note that beam_ssa_dead does not attempt to optimize away
redundant bs_context_binary instructions, because that instruction
will be superseded by new instructions in the near future.
|
|
v3_codegen is replaced by three new passes:
* beam_kernel_to_ssa which translates the Kernel Erlang format
to a new SSA-based intermediate format.
* beam_ssa_pre_codegen which prepares the SSA-based format
for code generation, including register allocation. Registers
are allocated using the linear scan algorithm.
* beam_ssa_codegen which generates BEAM assembly code from the
SSA-based format.
It easier and more effective to optimize the SSA-based format before X
and Y registers have been assigned. The current optimization passes
constantly have to make sure no "holes" in the X register assignments
are created (that is, that no X register becomes undefined that an
allocation instruction depends on).
This commit also introduces the following optimizations:
* Replacing of tuple matching of records with the is_tagged_tuple
instruction. (Replacing beam_record.)
* Sinking of get_tuple_element instructions to just before the first
use of the extracted values. As well as potentially avoiding
extracting tuple elements when they are not actually used on all
executions paths, this optimization could also reduce the number
values that will need to be stored in Y registers. (Similar to
beam_reorder, but more effective.)
* Live optimizations, removing the definition of a variable that is
not subsequently used (provided that the operation has no side
effects), as well strength reduction of binary matching by replacing
the extraction of value from a binary with a skip instruction. (Used
to be done by beam_block, beam_utils, and v3_codegen.)
* Removal of redundant bs_restore2 instructions. (Formerly done
by beam_bs.)
* Type-based optimizations across branches. More effective than
the old beam_type pass that only did type-based optimizations in
basic blocks.
* Optimization of floating point instructions. (Formerly done
by beam_type.)
* Optimization of receive statements to introduce recv_mark and
recv_set instructions. More effective with far fewer restrictions
on what instructions are allowed between creating the reference
and entering the receive statement.
* Common subexpression elimination. (Formerly done by beam_block.)
|
|
As a preparation for replacing v3_codegen with a new code generator,
remove unsafe optimization passes. Especially the older compiler
passes have implicit assumptions about how the code is generated.
Remove the optimizations in beam_block (keep the code that creates
blocks) because they are unsafe. beam_block also calls
beam_utils:live_opt/1, which is unsafe.
Remove beam_type because it calls beam_utils:live_opt/1, and also
because it recalculates the number of heaps words and number of live
registers in allocation instructions, thus potentially hiding bugs in
other passes.
Remove beam_receive because it is unsafe.
Remove beam_record because it is the only remaining user
of beam_utils:anno_defs/1.
Remove beam_reorder because it makes much more sense to run it
as an early SSA-based optimization pass.
Remove the now unused functions in beam_utils:
anno_def/1
delete_annos/1
is_killed_block/2
live_opt/1
usage/3
Note that the following test cases will fail because of the
removed optimizations:
compile_SUITE:optimized_guards/1
compile_SUITE:bc_options/1
receive_SUITE:ref_opt/1
|
|
The v3_life pass does not do enough to be worth being its own
pass. Essentially it does two things:
* Calculates life-time information starting from the annotations
that v3_kernel provides. That part can be moved into v3_codegen.
* Rewrites the Kernel Erlang records to similar plain tuples
(for example, #k_cons{hd=Hd,tl=Tl} is rewritten to {cons,Hd,Tl}).
That rewriting is not needed and can be eliminated.
|
|
The goal of this pass is to find values that are built from
patterns and generate aliases for those values to remove
pressure from the GC. For example, this code:
example({ok, Val}) ->
{ok, Val}.
shall become:
example({ok, Val} = Tuple) ->
Tuple.
Currently this pass aliases tuple and cons nodes made of literals,
variables and other cons. The tuple/cons may appear anywhere in the
pattern and it will be aliased if used later on.
Notice a tuple/cons made only of literals is not aliased as it may
be part of the literal pool.
|
|
|
|
As part of sys_core_fold, variables involved in bit syntax
matching would be annotated when it would be safe for a later
pass to do the delayed sub-binary creation optimization.
An implicit assumption regarding the annotation was that the
code must not be further optimized. That assumption was broken
in 05130e48555891, which introduced a fixpoint iteration
(applying the optimizations until there were no more changes).
That means that a variable could be annotated as safe for
reusing the match context in one iteration, but a later iteration
could rewrite the code in a way that would make the optimization
unsafe.
One way to fix this would be to clear all reuse_for_context
annotations before each iteration. But that would be wasteful.
Instead I chose to fix the problem by moving out the annotation
code to a separate pass (sys_core_bsm) that is run later after
all major optimizations of Core Erlang has been done.
|
|
Rewrite the instruction stream on tagged tuple tests.
Tagged tuples means a tuple of any arity with an atom as its first element.
Typically records, ok-tuples and error-tuples.
from:
...
{test,is_tuple,Fail,[Src]}.
{test,test_arity,Fail,[Src,Sz]}.
...
{get_tuple_element,Src,0,Dst}.
...
{test,is_eq_exact,Fail,[Dst,Atom]}.
...
to:
...
{test,is_tagged_tuple,Fail,[Src,Sz,Atom]}.
...
|
|
The guard optimizations in v3_kernel has removed the need for
beam_bool.
|
|
* rickard/time-unit/OTP-13831:
Replace usage of deprecated time units
|
|
The previous commits have made sys_pre_expand superfluous. Since
sys_pre_expand is undocumented and unsupported it can be removed in
a major release without prior deprecation.
Also remove code in erl_parse that handles abstract code that has
passed through sys_pre_expand.
We considered deprecating sys_pre_expand just in case, but decided
against it for the following reasons:
- Anyone brave and knowledgeable enough to use sys_pre_expand should
be able to cope with sys_pre_expand being removed.
- If we kept it, but didn't test it anywhere in OTP, it could
potentially stop working. So we would probably have to add some test
cases.
|
|
|
|
|
|
In the future we might want to add more bit syntax optimizations,
but beam_block is already sufficiently complicated. Therefore, move
the bit syntax optimizations out of beam_block into a separate
compiler pass called beam_bs.
|
|
When matching tuples, the pattern matching compiler would generate
code that would fetch all elements of the tuple that will ultimately
be used, *before* testing that (for example) the first element is the
correct record tag. For example:
is_tuple Fail {x,0}
test_arity Fail {x,0} 3
get_tuple_element {x,0} 0 {x,1}
get_tuple_element {x,0} 1 {x,2}
get_tuple_element {x,0} 2 {x,3}
is_eq_exact Fail {x,1} some_tag
If {x,2} and {x,3} are not used at label Fail, we can re-arrange the
code like this:
is_tuple Fail {x,0}
test_arity Fail {x,0} 3
get_tuple_element {x,0} 0 {x,1}
is_eq_exact Fail {x,1} some_tag
get_tuple_element {x,0} 1 {x,2}
get_tuple_element {x,0} 2 {x,3}
Doing that may be beneficial in two ways.
If the branch is taken, we have eliminated the execution of two
unnecessary instructions.
Even if the branch is never or rarely taken, there is the possibility
for more optimizations following the is_eq_exact instructions.
For example, imagine that the code looks like this:
get_tuple_element {x,0} 1 {x,2}
get_tuple_element {x,0} 2 {x,3}
move {x,2} {y,0}
move {x,3} {y,1}
Assuming that {x,2} and {x,3} have no further uses in the code
that follows, that can be rewritten to:
get_tuple_element {x,0} 1 {y,0}
get_tuple_element {x,0} 2 {y,1}
When should we perform this optimization?
At the very latest, it must be done before opt_blocks/1 in
beam_block which does the elimination of unnecessary moves.
Actually, we want do the optimization before the blocks have
been established, since moving instructions out of one block
into another is cumbersome.
Therefore, we will do the optimization in a new pass that is
run before beam_block. A new pass will make debugging easier,
and beam_block already has a fair number of sub passes.
|
|
|
|
* egil/opt-compile-time/OTP-12774:
stdlib: Relax erl_anno_SUITE:is_anno/1 test
Update primary bootstrap
compiler: Use Maps as type information
compiler: Use Maps instead of dict in beam_jump
compiler: Use cerl_sets instead of gb_sets in beam_type
compiler: Use Maps instead of gb_trees in beam_dead
compiler: Use cerl_sets instead of gb_sets in beam_jump
compiler: Use cerl_sets instead of sets in v3_kernel
compiler: Use cerl_sets instead of gb_sets in sys_core_fold
compiler: Add cerl_sets module
compiler: Scope uses gb_sets not gb_trees
beam_dict: Use Maps to map function name indices
beam_dict: Use Maps to map line indices
beam_dict: Use Maps to map atom indices
v3_codegen: Use Maps to map local functions
v3_life: Refactor variable db
compiler: Use lc instead of map/1 in v3_codegen
stdlib: Optimize erl_anno:is_string/1
Conflicts:
bootstrap/lib/kernel/ebin/inet_dns.beam
bootstrap/lib/stdlib/ebin/erl_anno.beam
bootstrap/lib/stdlib/ebin/erl_lint.beam
|
|
A sets implementation based on maps.
|
|
|
|
* rickard/time_api/OTP-11997: (22 commits)
Update primary bootstrap
inets: Suppress deprecated warning on erlang:now/0
inets: Cleanup of multiple copies of functions Add inets_lib with common functions used by multiple modules
inets: Update comments
Suppress deprecated warning on erlang:now/0
Use new time API and be back-compatible in inets Remove unused functions and removed redundant test
asn1 test SUITE: Eliminate use of now/0
Disable deprecated warning on erlang:now/0 in diameter_lib
Use new time API and be back-compatible in ssh
Replace all calls to now/0 in CT with new time API functions
test_server: Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
otp_SUITE: Warn for calls to erlang:now/0
Replace usage of erlang:now() with usage of new API
Multiple timer wheels
Erlang based BIF timer implementation for scalability
Implement ethread events with timeout
...
Conflicts:
bootstrap/bin/start.boot
bootstrap/bin/start_clean.boot
bootstrap/lib/compiler/ebin/beam_asm.beam
bootstrap/lib/compiler/ebin/compile.beam
bootstrap/lib/kernel/ebin/auth.beam
bootstrap/lib/kernel/ebin/dist_util.beam
bootstrap/lib/kernel/ebin/global.beam
bootstrap/lib/kernel/ebin/hipe_unified_loader.beam
bootstrap/lib/kernel/ebin/inet_db.beam
bootstrap/lib/kernel/ebin/inet_dns.beam
bootstrap/lib/kernel/ebin/inet_res.beam
bootstrap/lib/kernel/ebin/os.beam
bootstrap/lib/kernel/ebin/pg2.beam
bootstrap/lib/stdlib/ebin/dets.beam
bootstrap/lib/stdlib/ebin/dets_utils.beam
bootstrap/lib/stdlib/ebin/erl_tar.beam
bootstrap/lib/stdlib/ebin/escript.beam
bootstrap/lib/stdlib/ebin/file_sorter.beam
bootstrap/lib/stdlib/ebin/otp_internal.beam
bootstrap/lib/stdlib/ebin/qlc.beam
bootstrap/lib/stdlib/ebin/random.beam
bootstrap/lib/stdlib/ebin/supervisor.beam
bootstrap/lib/stdlib/ebin/timer.beam
erts/aclocal.m4
erts/emulator/beam/bif.c
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_db_hash.c
erts/emulator/beam/erl_init.c
erts/emulator/beam/erl_process.h
erts/emulator/beam/erl_thr_progress.c
erts/emulator/beam/utils.c
erts/emulator/sys/unix/sys.c
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/erts_internal.beam
erts/preloaded/ebin/init.beam
erts/preloaded/src/erts_internal.erl
lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl
lib/diameter/src/base/diameter_lib.erl
lib/kernel/src/os.erl
lib/ssh/test/ssh_basic_SUITE.erl
system/doc/efficiency_guide/advanced.xml
|
|
|
|
The code for inlining high-order functions from the lists module
is quite annoying when you try to navigate the sys_core_fold
module. Break out the code into its own module.
|
|
Most dependencies introduced are exactly the dependencies to other
applications found by xref. That is, there might be real dependencies
missing. There might also be pure debug dependencies listed that
probably should be removed. Each application has to be manually
inspected in order to ensure that all real dependencies are listed.
All dependencies introduced are to application versions used in
OTP 17.0. This since the previously used version scheme wasn't
designed for this, and in order to minimize the work of introducing
the dependencies.
|
|
|
|
|
|
Introduce the mandary beam_a pass that will be run directly after code
generation, and the mandatory beam_z pass that will be run just before
beam_asm. Since these passes surround the optimizations, beam_a can
(for example) do instruction renaming to simplify the optimization
passes and beam_z can undo those renamings.
|
|
In order to save space, rewrite suitable calls to erlang:error/{1,2}
to special BEAM instructions.
This code is probably longer than the code taken out of v3_life and
v3_codegen in the previous commit, but it is much easier to
understand and maintain since the BEAM assembler format is better
understood than the v3_life format.
|
|
|
|
To facilitate debugging of compiler bugs, teach the compiler the
'no_dead' option. Since the beam_dead pass used to do the necessary
splitting of basic blocks to expose all labels, we must move that
splitting into a separate pass that is always run.
|
|
* bg/opt-receive:
Test that gen_server:call/2,3 are fast even with a huge message queue
erts: Add tests for the receive optimization
Update primary bootstrap
erts: Implement recv_mark/1 and recv_set/1 for real
compiler tests: Cover the error handling code in beam_receive
compiler test: Test optimization of receive statements
Optimize selective receives in the presence of a large message queue
Introduce the new recv_mark/1 and recv_mark/1 instructions
Compile tests that communicate with R12 nodes with the r12 option
Move p_run/2 to test_lib
gen: Inline wait_resp_mon/2 to help the compiler optimize
OTP-8623 bg/opt-receive
reveive statements that can only read out a newly created reference are now
specially optimized so that it will execute in constant time regardless of
the number of messages in the receive queue for the process. That
optimization will benefit calls to gen_server:call(). (See gen:do_call/4
for an example of a receive statement that will be optimized.)
|
|
If a gen_server process has many messages in its message queue and
calls another gen_server process, the selective receive in
gen_server:call() will have to go through the entire message queue.
Have the compiler generate the new mark_recv/1 and mark_recv/1
instructions that can avoid going through the entire message queue.
|
|
|
