| Age | Commit message (Collapse) | Author |
|---|
|
anders/diameter/decode_format/OTP-14511
* anders/diameter/config_consistency/OTP-14555:
Fix strict_arities blunder
Fix minor error-handling blunder
Let strict_mbit and incoming_maxlen be configured per transport
Let a service configure default transport options
Rename type evaluable -> eval
Document transport_opt() strict_capx
Rename transport_opt() capx_strictness to strict_capx
|
|
Remove value from the merged map, not from the maps being merged.
Bundled in commit 5f3becad.
|
|
Leading to this admonition from dialyzer:
diameter_config.erl:670: The variable No can never match since previous
clauses completely covered the type 'ok'
The throw was caught, but resulted in an error return without the
intended information.
|
|
RFC 6733 says this:
6.2. Diameter Answer Processing
When a request is locally processed, the following procedures MUST be
applied to create the associated answer, in addition to any
additional procedures that MAY be discussed in the Diameter
application defining the command:
...
o Any Proxy-Info AVPs in the request MUST be added to the answer
message, in the same order they were present in the request.
This wasn't done when a handle_request callback returned a Result-Code
in an 'answer-message' or protocol_error tuple, causing diameter itself
to construct the answer message. This form of answer is just a
convenience, since the callback can always return an answer that it
constructs itself.
|
|
The introduction of decode_format in commit 722fa415 (and then 55e65b26)
meant the value was not necessarily the intended tuple.
|
|
It's no longer the AVP name as of the parent commit, but the name of
the field/member the value will be stored in. Typically the AVP name,
but possibly 'AVP'.
|
|
That is, when the arity of an 'AVP' field has an upper bound. This
shouldn't happen in practice, but if an AVP is known but its name not
explicit in the message grammar then its count was confused with that
of AVPs packed into the 'AVP' field.
|
|
Commit 96cd627a changed the way the index field was used, but the
enumeration is used in at least one known application (as a pointer from
elements of diameter_packet.errors to elements of diameter_packet.avps)
and the motivation for the change is questionable: the lookup that was
avoided was unnecessary given that it was already performed in
incrementing a counter. Revert to enumerating as before in the non-relay
case, but not in the relay case since there's no corresponding usecase.
|
|
* anders/diameter/config_consistency/OTP-14555:
Let strict_mbit and incoming_maxlen be configured per transport
Let a service configure default transport options
Rename type evaluable -> eval
|
|
* anders/diameter/upgrade/OTP-14552:
Fix compatibility of remote send
|
|
* anders/diameter/strict_capx/OTP-14546:
Document transport_opt() strict_capx
Rename transport_opt() capx_strictness to strict_capx
|
|
* anders/diameter/performance/OTP-14521:
Fix influence of decode_format on service events
Work around more common_test woe
|
|
* anders/diameter/caseless/OTP-14535:
Replace calls to inet_parse(3)
Fix regexp match of accept tuple in diameter_tcp/sctp
|
|
Decoded CER/CEA messages are passed in events messages that can be
subscribed to using diameter:subscribe/1. A configured decode_format was
not reflected in these, messages always being passed as records.
Clarify that strict_arities only applies to message callbacks.
|
|
Since these can make sense per peer. The remaining service-only options
either belong there or make little sense being configured per transport.
|
|
Only a default spawn_opt has been possible to configure, but there's
no reason why most others should need to be configured per transport.
Those options that still only make sense on a transport are
transport_module/config (because of the semantics of multiple values),
applications/capabilities (since these override service options), and
private (since it's only to allow user-specific options in a backwards
compatible way).
|
|
Export the old type as a synonym for backwards compatability. The name
evaluable is a bit too awkward.
|
|
To follow the naming of options like strict_mbit and more. Still accept
capx_strictness since this is known to be used.
Introduced in commit e4f28f3b.
|
|
By changing the definition of the request record, commit f489c0d5 broke
sending an outgoing request over a peer connection terminated on a
remote node running an older version of diameter. The modified fields
aren't even used on the remote node, so simply reintroduce one of the
fields so that the size of the tuple is unchanged.
|
|
* anders/diameter/performance/OTP-14521:
Work around unexpected common_test behaviour
Randomly skip groups in traffic suite
Randomly disable traffic counters in traffic suite
Add service_opt() traffic_counters
Fix type spec
Split AVPs at decode
Avoid unnecessary copying of binaries in diameter_tcp
Don't update diameter_tcp state unnecessarily
Don't update diameter_tcp state unnecessarily
Simplify extraction of incoming Diameter messages in diameter_tcp
Restructure/simplify message reception in diameter_peer_fsm
Sleep randomly at the start of (parallel) traffic testcases
Fix ct return value in traffic suite
Fix type spec
Optimize sub-binaries
Optimize sub-binaries
Count AVPs in #diameter_avp.index
Don't extract options unnecessarily at encode
Redo message decode as a single pass
|
|
* anders/diameter/5009/OTP-14512:
Use relaxed arity checks in traffic suite
Be forgiving of non-list values at encode
Add service_opt() strict_arities
Fix detection of 5009 errors
Test Result-Code 5009 in traffic suite
|
|
* anders/diameter/codec/OTP-14511: (26 commits)
Limit SCTP testing in traffic suite
Increase init_per_group timetrap in traffic suite
Add diameter_util:eprof/1 for test
Don't search forms unnecessarily in diameter_exprecs parse transform
Increase init_per_suite timetrap in traffic suite
Don't count AVPs unnecessarily at encode
Test decode_format record_from_map in traffic suite
Tweak limiting of testcases in traffic suite
Don't take length of AVP lists unnecessarily at encode
Tweak map-valued decode
Rearrange group names in traffic suite
Randomly wrap answers in diameter_packet in transport suite
Don't exercise client/server encoding independently in traffic suite
Add decode_format record_from_map
Rename record_decode -> decode_format
Create fewer client connections in traffic suite
Test record_decode in traffic suite
Map answers to maps in traffic suite
Test map encoding in traffic suite
Let messages and grouped AVPs be decoded to lists
...
|
|
With the documented calls to inet(3).
|
|
Matching of remote addresses when accepting connections in a listening
transport was case-sensitive, causing the semantics to change as a
consequence of 95ebfa0b, which made inet:ntoa/1 return lowercase.
|
|
To be able to disable the counting of messages for which application
callbacks take place. Messages sent/handled by diameter itself are
always counted.
|
|
That dialyzer hasn't noticed is broken.
|
|
Despite what the Efficiency Guide says about match being more efficient,
split_binary appears to be slightly faster. (Although this one
extraction is a drop in the bucket.) Binary optimizations aren't an
issue during decode.
|
|
Create less garbage.
|
|
That dialyzer hasn't noticed is broken.
|
|
* anders/diameter/message_cb/OTP-14486:
Add simple message_cb to example server
Fix inappropriate message callbacks
|
|
Also inline incr/8 and associated functions that were needed for the
compiler to accept the optimization, since this does make for a
measuable improvement.
|
|
With ERL_COMPILER_OPTIONS=bin_opt_info, before:
base/diameter_codec.erl:508: Warning: NOT OPTIMIZED: the binary matching instruction that follows in the same function have problems that prevent delayed sub binary optimization (probably indicated by INFO warnings)
And after:
base/diameter_codec.erl:508: Warning: OPTIMIZED: creation of sub binary delayed
This has a surprisingly large impact on the performance of
diameter_codec:collect_avps/2: about 15% faster in one testcase on a RAR
with 7 AVPs.
|
|
The index field in record diameter_avp was previously used to enumerate
AVPs so that the list could be returned in some cases, since
diameter_codec:collect_avps/2 (now /1) reversed the order. That's no
longer the case as of the grandparent commit, so use the field to
enumerate instances of the same AVP instead, and only when arities are
being checked, to save having to look them up in the map when checking
for 5009 errors, or counting AVPs at all in diameter_codec:collect_avps/1.
|
|
Extract strict_arities once and pass it through as an argument.
|
|
Decode has previously been two passes: first chunk the message into a
reversed list of toplevel diameter_avp records, then fold through the
reversed list to build the full result. Various workarounds have made it
a bit more convoluted than it should be however. Rework it completely,
turning the previous 2-pass tail-recursive implementation into a 1-pass
body recursive one.
The relay decode still exists in diameter_codec, as a stripped down
version of the full decode in diameter_gen.
|
|
|
|
To be able to disable the relatively expensive check that the number of
AVPs received in a message or grouped AVP agrees with the dictionary in
question. The may well be easier for the user in handle_request/answer
callbacks, when digesting the received message, and in some cases may
not be important.
The check at encode can also be disabled, allowing messages that don't
agree with the dictionary in question to be sent, which can be useful in
test (at least).
|
|
As noted in the parent commit, the wrong AVPs were reported, being
counted from the back of the message instead of the front. Both 5005 and
5009 errors are now detected after the message is decoded.
|
|
Stop counting when there can be no arity errors.
|
|
Count as AVPs are encoded instead.
|
|
Use the same [MsgName | Avps] representation as for the list decode, but
with Avps a map instead of a AVP name/values list. As a result, don't
set the message/AVP name on an additional key in the map, which felt a
bit odd. Messages are [MsgName :: atom() | map()], Grouped AVPs are just
map().
Fix at least one problem in the traffic suite along the way: with
decode_format false, the own decode in to_map/2 didn't know whether or
not to decode strings, resulting on some failures.
|
|
Undocumented, for transforming a map decode to record.
The record decode becomes more expensive the larger the number of AVPs
in the message definition in question, since the record is recreated
each time an AVP value is set in it. The map decode can potentially do
better.
|
|
{record_decode, map} is a bit too quirky.
|
|
That is, decode to the same format that encode already accepts. Only a
message has its name at the head of the list since AVPs are already
name/value pairs.
|
|
With {record_decode, map}. The option name is arguably a bit misleading
now, but not too objectionable given that the encode/decode in question
has historically only been of records.
One advantage of the map decode is that the map only contains values for
those AVPs existing in the message or grouped AVP in question. The name
of the message or grouped AVP is stored in with key ':name', the leading
colon ensuring that the key isn't a diameter-name.
Decoding to maps makes the hrl files generated from dictionary files
largely irrelevant. There are value defines generated into these, but
they're typically so long as to be unusable.
|
|
To control whether or not messages and grouped AVPs are decoded to
records, in #diameter_packet.msg and #diameter_avp.value respectively.
The decode became unnecessary for diameter's needs in parent commit,
which decoupled it from the checking of AVP arities.
|
|
Instead of after, during the check that AVPs have sufficient arity.
This makes the arity checks independent of the record decode, which
will allow the latter to be made optional.
|
|
Most of the contents were moved to module diameter_gen in commit
205521d3.
|
|
Commit ca09cf7b caused an incoming CER or DPR to be regarded as
discarded in diameter_watchdog, resulting in a corresponding message
callback (if configured) in diameter_tcp/sctp.
|
|
Service configuration share_peers and use_shared_peers is used to share
peer connections with other connected nodes having a service of the same
name: a service process asks its neighbours about existing connections
when it starts, and pushes new connections as they're established.
The problem is that the mechanics assume that nodes() doesn't change. In
particular, if a neighbour isn't connected when a service starts then it
doesn't receive the request to share connections. Solve by having each
service process monitor nodes, a nodeup notification causing it to
request connections of its neighbours. Nodes going down is already
handled, by remote connections being monitored in diameter_service.
|
