| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
* bjorn/stdlib/filelib-wildcard/OTP-10812:
Remove special case handling "-" at the beginning of a charset
Optimize character sets using gb_sets
Clean up and simplify the inner matching loop
Only sort the result list once, just before returning
Replace filename:join/2 with '++'
Rethink the filelib:wildcard() functions
Don't redefine error/1
Don't allow binaries as the Cwd argument for filelib:wildcard()
Don't handle binaries from file:list_dir/1
Strengthen test suite
|
|
* bjorn/stdlib/types:
Make the file:filename() type more restrictive
c: Remove handling of binaries in return from file:list_dir/1
|
|
Commit 70b5e24c9498225fadc08d19503269c8aad851bf broke
filelib:wildcard(Pattern, ".").
Over the years, the logic for filelib:wilcard() has become a mess
of special cases.
Probably because of premature optimization, filelib:wildcard(Pattern)
and filelib:wildcard(Pattern, Cwd) are handled differently.
They can be consolidated if we use a "." as the default Cwd argument.
We can also simplify things by compiling the Cwd argument into the
wildcard. We did not that in the initial implementation because it
used to be possible to pre-compile a wildcard and pass it to
filelib:wildcard/{1,2}. Since that is no longer possible, there is
no point in keeping the compiled wildcard "portable" (not dependent
on the Cwd argument).
|
|
|
|
The recommended type for filenames is a list of characters (which
may be Unicode characters greater than 255). Change the
file:filename() to reflect that.
For the filename module we still need a type that can be either
a string or a binary, so we need to introduce the type
file:filename_all().
|
|
* pan/unicode_filename_warnings:
Add file:list_dir_all/1 and file:read_link_all/1
prim_file: Add list_dir_all() and read_link_all()
Teach prim_file:set_cwd() to avoid entering non-translatable directories
Make prim_file skip invalid filenames in unicode mode
prim_file: Refactor functions that return filenames
prim_file: Refactor handling of responses
prim_file: Always open non-file ports in binary mode
Test that list_dir("non-existing-dir") fails with the correct error
|
|
|
|
|
|
|
|
* vd/code_get_mode/OTP-10823:
Added name prefix to code.xml
Add a new function code:get_mode() can be used to detect how the code servers behaves
|
|
|
|
* mh/duplicate_name_error_message/OTP-10797:
Slightly nicer error message when node start fails due to duplicate name
|
|
* bjorn/remove-packages/OTP-10348:
kernel docs: Remove references to specs_packages.xml
|
|
|
|
|
|
servers behaves
Rationale:
Some applications (like erlide) have code to be loaded dynamically on a
node. It may be slow to load everything upfront every time, so if the
node is in interactive mode, we would like to just append to the load
path. Currently, there is no direct way to detect if the node is running
in embedded mode or not so that we can do the right thing.
|
|
|
|
|
|
|
|
When starting up an Erlang node using a node name that is already in
use, the new node used to crash with output starting with this message:
{error_logger,{{2013,1,25},{16,0,42}},"Protocol: ~p: register error: ~p~n",["inet_tcp",{{badmatch,{error,duplicate_name}},[{inet_tcp_dist,listen,1,[.....
With this change, the first line in the output changes to:
{error_logger,{{2013,1,25},{16,40,41}},"Protocol: ~tp: the name foo@localhost seems to be in use by another Erlang node",["inet_tcp"]}
|
|
|
|
The inline attribute has been simplified due to problems with
compiling to native code. The exact cause it beyond the scope
of this commit.
|
|
The documentation of some Unicode functions in io_lib was committed by
mistake.
|
|
* bjorn/kernel/undefined-function-handler/OTP-10617:
Add a warning to discourage abuse of $handle_undefined_function/2
|
|
* bjorn/warnings-zero-tolerance:
Turn warnings to errors on selected applications
runtime_tools_sup: Eliminate warning
inet_parse: Eliminate a compiler warning
|
|
* sverk/r16/utf8-atoms:
erl_interface: Fix bug when transcoding atoms from and to UTF8
erl_interface: Changed erlang_char_encoding interface
erts: Testcase doing unicode atom printout with ~w
erl_interface: even more utf8 atom stuff
erts: Fix bug in analyze_utf8 causing faulty latin1 detection
Add UTF-8 node name support for epmd
workaround...
Fix merge conflict with hasse
UTF-8 atom documentation
test case
erl_interface: utf8 atoms continued
Add utf8 atom distribution test cases
atom fixes for NIFs and atom_to_binary
UTF-8 support for distribution
Implement UTF-8 atom support for jinterface
erl_interface: Enable decode of unicode atoms
stdlib: Fix printing of unicode atoms
erts: Change internal representation of atoms to utf8
erts: Refactor rename DFLAG(S)_INTERNAL_TAGS for conformity
Conflicts:
erts/emulator/beam/io.c
OTP-10753
|
|
|
|
When using the async thread pool and compressed files, when
an efile driver port instance is shutdown, the efile_drv
stop callback closes the file descriptor (a gzFile instance
actually) - this is dangerous if at the same time there's
an async thread performing an operation against the file,
for example calling invoke_read(), which can result in a
segmentation fault, or calling invoke_close() which double
closes the gzFile and this in turn causes 2 consecutive calls
to driver_free() against same gzFile instance (resulting in
later unexpected crashes in erl_bestfit_alloc.c for example).
The following test program makes the emulator crash when using
the async thread pool:
-module(t2).
-export([t/1]).
t(N) ->
file:delete("foo.bar"),
% Use of 'compressed' option, for creating/writing the file,
% is irrelevant. It only matters when opening it later for
% reads - a non-compressed file open with the 'compressed'
% option goes through an internal gzFile handle (instead of
% a plain integer fd), just like a compressed file.
%{ok, Fd} = file:open("foo.bar", [raw, write, binary]),
{ok, Fd} = file:open("foo.bar", [raw, write, binary, compressed]),
ok = file:write(Fd, <<"qwerty">>),
ok = file:close(Fd),
Pid = spawn_link(fun() ->
process_flag(trap_exit, true),
loop(N)
end),
Ref = erlang:monitor(process, Pid),
receive
{'DOWN', Ref, _, _, _} ->
ok
end.
loop(0) ->
ok;
loop(N) ->
Server = self(),
Pid = spawn(fun() ->
{ok, Fd} = file:open("foo.bar", [read, raw, binary, compressed]),
Server ! continue,
% Comment the file:read/2 call to make the file:close/1 call much
% more likely to crash or end up causing efile_drv to close twice
% the fd (gzFile), which will make the emulator crash later in the
% best fit allocator (erl_bestfit_alloc.c).
_ = file:read(Fd, 5),
file:close(Fd)
end),
receive continue -> ok end,
exit(Pid, shutdown),
loop(N - 1).
Running this test when using the async thread pool:
shell> erl +A 4
Erlang R15B03 (erts-5.9.3.1) [source] [64-bit] [smp:4:4] [async-threads:4] [hipe] [kernel-poll:false]
Eshell V5.9.3.1 (abort with ^G)
1> c(t2).
{ok,t2}
2> t2:t(500000).
Segmentation fault (core dumped)
When not using the async thread pool, there are no issues:
shell> erl
Erlang R15B03 (erts-5.9.3.1) [source] [64-bit] [smp:4:4] [async-threads:0] [hipe] [kernel-poll:false]
Eshell V5.9.3.1 (abort with ^G)
1> c(t2).
{ok,t2}
2> t2:t(500000).
ok
3>
An example stack trace when the crash happens because there's
an ongoing read operation is:
Thread 1 (Thread 0x7f021cf2c700 (LWP 10687)):
#0 updatewindow (strm=0x2691bf8, out=5) at zlib/inflate.c:338
#1 0x00000000005a2ba0 in inflate (strm=0x2691bf8, flush=0) at zlib/inflate.c:1141
#2 0x000000000055c46a in erts_gzread (file=0x2691bf8, buf=0x7f0215b29e80, len=5) at drivers/common/gzio.c:523
#3 0x00000000005849ef in invoke_read (data=0x26b2228) at drivers/common/efile_drv.c:1114
#4 0x000000000050adcb in async_main (arg=0x7f021bf5cf40) at beam/erl_async.c:488
#5 0x00000000005c21a0 in thr_wrapper (vtwd=0x7fff69c6ff10) at pthread/ethread.c:106
#6 0x00007f021c573e9a in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
#7 0x00007f021c097cbd in clone () from /lib/x86_64-linux-gnu/libc.so.6
#8 0x0000000000000000 in ?? ()
And when there's an ongoing close operation when the driver
is stopped:
Thread 1 (Thread 0x7fe5f5654700 (LWP 747)):
#0 0x0000000000459b64 in bf_unlink_free_block (block=0x10b2a70, allctr=<optimized out>, flags=<optimized out>) at beam/erl_bestfit_alloc.c:792
#1 bf_unlink_free_block (flags=0, block=0x10b2a70, allctr=0x873380) at beam/erl_bestfit_alloc.c:822
#2 bf_get_free_block (allctr=0x873380, size=<optimized out>, cand_blk=<optimized out>, cand_size=<optimized out>, flags=0) at beam/erl_bestfit_alloc.c:869
#3 0x000000000044f0dd in mbc_alloc_block (alcu_flgsp=<synthetic pointer>, blk_szp=<synthetic pointer>, size=200, allctr=0x873380) at beam/erl_alloc_util.c:1198
#4 mbc_alloc (allctr=0x873380, size=200) at beam/erl_alloc_util.c:1345
#5 0x000000000045449b in do_erts_alcu_alloc (size=200, extra=0x873380, type=165) at beam/erl_alloc_util.c:3442
#6 erts_alcu_alloc_thr_pref (type=165, extra=<optimized out>, size=192) at beam/erl_alloc_util.c:3520
#7 0x000000000055c0bf in gz_open (mode=0x5d98b2 "rb", path=0x1103418 "foo.bar") at drivers/common/gzio.c:164
#8 erts_gzopen (path=0x1103418 "foo.bar", mode=0x5d98b2 "rb") at drivers/common/gzio.c:307
#9 0x0000000000584e47 in invoke_open (data=0x1103330) at drivers/common/efile_drv.c:1857
#10 0x000000000050adcb in async_main (arg=0x7fe5f698af80) at beam/erl_async.c:488
|
|
* fh/shell_history_search/OTP-10739:
Add search to Erlang shell's history
|
|
|
|
The warning was introduced in e367eb44969b00cac910c8eb14e7b3ce3ee0cc91.
|
|
|
|
The type ascii_string() in the base64 module has been corrected.
The type file:file_info() has been cleaned up.
The type file:fd() has been made opaque in the documentation.
The type nodes() has been removed from erl_bif_types.erl.
|
|
* lukas/kernel/iter_max_socks_to_node/OTP-10734:
Isolate iter_max_socks to own node
|
|
This prevents this testcase from ruining the entire
testrun if it should fail critically.
|
|
Search mode can be entered by pressing ctrl-r. Enter terms and press
ctrl-r again to search backwards, or ctrl-s to then search forward (if
you terminal doesn't eat up that one). Press enter to execute the line,
or use tab, arrow keys, or other control sequences (^D, ^K, etc.) to
exit search mode while remaining on the last found line. Exiting is also
possible by pressing the escape key twice.
The search mode is a simpler version of the one available in bash or
zsh shells.
This adds a few modes to the shell (search, on top of none and meta) in
group.erl for history search, and a few more in edlin.erl to change the
meaning of control sequences while searching.
|
|
|
|
* nox/enable-silent-rules/OTP-10726:
Implement ./otp_build configure --enable-silent-rules
|
|
* bjorn/kernel/undefined-function-handler/OTP-10617:
Teach error_handler to call '$handle_undefined_function'
|
|
global_SUITE registers the name 'test_server' in the global registry
for what seems to be only historical reasons. Exactly how it happened
is lost in the mists of time, but I think the following is a reasonable
reconstruction:
* At one point in time, the test_server application started to do
a global registration of a 'test_server' process to support
embedded systems when the test_server application was run on both a
host and a target system.
* global_SUITE had to be modified to take the pre-existing
'test_server' registration into account.
* When Erlang/OTP switched to using common_test, global_SUITE was
modified to register the 'test_server' name itself in commit
8bd07f450816eaaae52d28740d89ead1f930cd02 (since the test_server
application does not register the 'test_server' name when run
under control of common_test).
To slightly reduce the size of global_SUITE, remove the redundant
registration and stop expecting 'test_server' to be registered.
|
|
* bjorn/remove-packages/OTP-10348:
compile: Remove vestiges of package support
Remove documentation about packages
|
|
* sal/get_env/OTP-10694:
Moved documentation in a separate entry
Removed obsolete ?line macro
Add application:get_key/3
|
|
|
|
|
|
With silent rules, the output of make is less verbose and compilation
warnings are easier to spot. Silent rules are disabled by default and
can be disabled or enabled at will by make V=0 and make V=1.
|
|
|
|
|
|
The new function provides a default value for a configuration
parameter.
|
