From ce5b401b2e75ca9f3880304298ad87592b6784de Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?P=C3=A9ter=20Dimitrov?= Date: Wed, 2 May 2018 21:10:31 +0200 Subject: Add conf file for cross compilation to Raspberry Pi 3 --- xcomp/erl-xcomp-armv8-rpi3-linux-gnueabihf.conf | 276 ++++++++++++++++++++++++ 1 file changed, 276 insertions(+) create mode 100644 xcomp/erl-xcomp-armv8-rpi3-linux-gnueabihf.conf diff --git a/xcomp/erl-xcomp-armv8-rpi3-linux-gnueabihf.conf b/xcomp/erl-xcomp-armv8-rpi3-linux-gnueabihf.conf new file mode 100644 index 0000000000..dffc4a4b56 --- /dev/null +++ b/xcomp/erl-xcomp-armv8-rpi3-linux-gnueabihf.conf @@ -0,0 +1,276 @@ +## -*-shell-script-*- +## +## %CopyrightBegin% +## +## Copyright Ericsson AB 2009-2018. All Rights Reserved. +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## +## %CopyrightEnd% +## +## File: erl-xcomp-armv8-rpi3-linux-gnueabihf.conf +## Author: Péter Dimitrov +## Tested: macOS High Sierra 10.13.2 / +## Raspberry Pi 3 Model B Rev 1.2 +## +## ----------------------------------------------------------------------------- +## When cross compiling Erlang/OTP using `otp_build', copy this file and set +## the variables needed below. Then pass the path to the copy of this file as +## an argument to `otp_build' in the configure stage: +## `otp_build configure --xcomp-conf=' +## ----------------------------------------------------------------------------- + +## Note that you cannot define arbitrary variables in a cross compilation +## configuration file. Only the ones listed below will be guaranteed to be +## visible throughout the whole execution of all `configure' scripts. Other +## variables needs to be defined as arguments to `configure' or exported in +## the environment. + +## -- Variables for `otp_build' Only ------------------------------------------- + +## Variables in this section are only used, when configuring Erlang/OTP for +## cross compilation using `$ERL_TOP/otp_build configure'. + +## *NOTE*! These variables currently have *no* effect if you configure using +## the `configure' script directly. + +# * `erl_xcomp_build' - The build system used. This value will be passed as +# `--build=$erl_xcomp_build' argument to the `configure' script. It does +# not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full +# `CPU-VENDOR-OS' triplet will be created by +# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess', +# the build system will be guessed using +# `$ERL_TOP/erts/autoconf/config.guess'. +erl_xcomp_build=guess + +# * `erl_xcomp_host' - Cross host/target system to build for. This value will +# be passed as `--host=$erl_xcomp_host' argument to the `configure' script. +# It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The +# full `CPU-VENDOR-OS' triplet will be created by +# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'. +erl_xcomp_host=armv8-rpi3-linux-gnueabihf + +# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the +# `configure' script. +#erl_xcomp_configure_flags= + +## -- Cross Compiler and Other Tools ------------------------------------------- + +## If the cross compilation tools are prefixed by `-' you probably do +## not need to set these variables (where `' is what has been passed as +## `--host=' argument to `configure'). + +## All variables in this section can also be used when native compiling. + +# * `CC' - C compiler. +CC=armv8-rpi3-linux-gnueabihf-gcc + +# * `CFLAGS' - C compiler flags. +#CFLAGS= + +# * `STATIC_CFLAGS' - Static C compiler flags. +#STATIC_CFLAGS= + +# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library +# search path for the shared libraries. Note that this actually is a +# linker flag, but it needs to be passed via the compiler. +#CFLAG_RUNTIME_LIBRARY_PATH= + +# * `CPP' - C pre-processor. +CPP=armv8-rpi3-linux-gnueabihf-cpp + +# * `CPPFLAGS' - C pre-processor flags. +#CPPFLAGS= + +# * `CXX' - C++ compiler. +CXX=armv8-rpi3-linux-gnueabihf-g++ + +# * `CXXFLAGS' - C++ compiler flags. +#CXXFLAGS= + +# * `LD' - Linker. +LD=armv8-rpi3-linux-gnueabihf-ld + +# * `LDFLAGS' - Linker flags. +LDFLAGS="-L$RPI_SYSROOT/lib" + +# * `LIBS' - Libraries. +#LIBS= + +## -- *D*ynamic *E*rlang *D*river Linking -- + +## *NOTE*! Either set all or none of the `DED_LD*' variables. + +# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers. +#DED_LD= + +# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'. +#DED_LDFLAGS= + +# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library +# search path for shared libraries when linking with `DED_LD'. +#DED_LD_FLAG_RUNTIME_LIBRARY_PATH= + +## -- Large File Support -- + +## *NOTE*! Either set all or none of the `LFS_*' variables. + +# * `LFS_CFLAGS' - Large file support C compiler flags. +#LFS_CFLAGS= + +# * `LFS_LDFLAGS' - Large file support linker flags. +#LFS_LDFLAGS= + +# * `LFS_LIBS' - Large file support libraries. +#LFS_LIBS= + +## -- Other Tools -- + +# * `RANLIB' - `ranlib' archive index tool. +RANLIB=armv8-rpi3-linux-gnueabihf-ranlib + +# * `AR' - `ar' archiving tool. +AR=armv8-rpi3-linux-gnueabihf-ar + +# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is +# currently used for finding out large file support flags to use, and +# on Linux systems for finding out if we have an NPTL thread library or +# not. +#GETCONF= + +## -- Cross System Root Locations ---------------------------------------------- + +# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross +# compilation environment. Currently, the `crypto', `odbc', `ssh' and +# `ssl' applications need the system root. These applications will be +# skipped if the system root has not been set. The system root might be +# needed for other things too. If this is the case and the system root +# has not been set, `configure' will fail and request you to set it. +erl_xcomp_sysroot="$RPI_SYSROOT" + +# * `erl_xcomp_isysroot' - The absolute path to the system root for includes +# of the cross compilation environment. If not set, this value defaults +# to `$erl_xcomp_sysroot', i.e., only set this value if the include system +# root path is not the same as the system root path. +#erl_xcomp_isysroot= + +## -- Optional Feature, and Bug Tests ------------------------------------------ + +## These tests cannot (always) be done automatically when cross compiling. You +## usually do not need to set these variables. Only set these if you really +## know what you are doing. + +## Note that some of these values will override results of tests performed +## by `configure', and some will not be used until `configure' is sure that +## it cannot figure the result out. + +## The `configure' script will issue a warning when a default value is used. +## When a variable has been set, no warning will be issued. + +# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes', +# the target system must have a working `__after_morecore_hook' that can be +# used for tracking used `malloc()' implementations core memory usage. +# This is currently only used by unsupported features. +#erl_xcomp_after_morecore_hook= + +# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system +# must be big endian. If `no', little endian. This can often be +# automatically detected, but not always. If not automatically detected, +# `configure' will fail unless this variable is set. Since no default +# value is used, `configure' will try to figure this out automatically. +#erl_xcomp_bigendian= + +# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the +# target system must have doubles in "middle-endian" format. If +# `no`, it has "regular" endianness. This can often be automatically +# detected, but not always. If not automatically detected, +# `configure` will fail unless this variable is set. Since no +# default value is used, `configure` will try to figure this out +# automatically. +#erl_xcomp_double_middle_endian + +# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes', +# the target system must have a working `clock_gettime()' implementation +# that can be used for retrieving process CPU time. +#erl_xcomp_clock_gettime_cpu_time= + +# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target +# system must have a working `getaddrinfo()' implementation that can +# handle both IPv4 and IPv6. +#erl_xcomp_getaddrinfo= + +# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes', +# the target system must have a working `gethrvtime()' implementation and +# is used with procfs `ioctl()'. +#erl_xcomp_gethrvtime_procfs_ioctl= + +# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the +# target system must have a working `dlsym(RTLD_NEXT, )' implementation +# that can be used on `brk' and `sbrk' symbols used by the `malloc()' +# implementation in use, and by this track the `malloc()' implementations +# core memory usage. This is currently only used by unsupported features. +#erl_xcomp_dlsym_brk_wrappers= + +# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target +# system must have a working `kqueue()' implementation that returns a file +# descriptor which can be used by `poll()' and/or `select()'. If `no' and +# the target system has not got `epoll()' or `/dev/poll', the kernel-poll +# feature will be disabled. +#erl_xcomp_kqueue= + +# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on +# Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on +# the target system must work. This variable is recommended to be set to +# `no' on Linux systems with kernel versions less than 2.6. +#erl_xcomp_linux_clock_gettime_correction= + +# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise, +# `no'. If `yes', the target system must have NPTL (Native POSIX Thread +# Library). Older Linux systems have LinuxThreads instead of NPTL (Linux +# kernel versions typically less than 2.6). +#erl_xcomp_linux_nptl= + +# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux; +# otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target +# system. `sigaltstack()' on Linux kernel versions less than 2.4 are +# broken. +#erl_xcomp_linux_usable_sigaltstack= + +# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes', +# the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old +# LinuxThreads thread libraries (Linux kernel versions typically less than +# 2.2) used these signals and made them unusable by the ERTS. +#erl_xcomp_linux_usable_sigusrx= + +# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise, +# `yes'. If `yes', the target system must have a working `poll()' +# implementation that also can handle devices. If `no', `select()' will be +# used instead of `poll()'. +#erl_xcomp_poll= + +# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target +# system must have a `putenv()' implementation that stores a copy of the +# key/value pair. +#erl_xcomp_putenv_copy= + +# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target +# system must have reliable floating point exceptions. +#erl_xcomp_reliable_fpe= + +# * `erl_xcomp_posix_memalign' - `yes|no'. Defaults to `yes' if `posix_memalign' +# system call exists; otherwise `no'. If `yes', the target system must have a +# `posix_memalign' implementation that accepts larger than page size +# alignment. +#erl_xcomp_posix_memalign= + +## ----------------------------------------------------------------------------- -- cgit v1.2.3 From 0a4f1f5e6f5134ec45acc3c2080ace5d010f2f95 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?P=C3=A9ter=20Dimitrov?= Date: Wed, 2 May 2018 22:53:10 +0200 Subject: Add HOWTO for cross compilation to Raspberry Pi 3 --- HOWTO/INSTALL-RASPBERRYPI3.md | 323 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 323 insertions(+) create mode 100644 HOWTO/INSTALL-RASPBERRYPI3.md diff --git a/HOWTO/INSTALL-RASPBERRYPI3.md b/HOWTO/INSTALL-RASPBERRYPI3.md new file mode 100644 index 0000000000..536d095cb4 --- /dev/null +++ b/HOWTO/INSTALL-RASPBERRYPI3.md @@ -0,0 +1,323 @@ +# Cross Compiling Erlang/OTP - Raspberry Pi 3 + + +## Introduction + +This document describes how to build a toolchain and cross compile Erlang/OTP +to Raspberry Pi 3 on macOS High Sierra. It is recommended to consult +[Building and Installing Erlang/OTP](https://github.com/erlang/otp/blob/master/HOWTO/INSTALL.md) and [Cross Compiling Erlang/OTP](https://github.com/erlang/otp/blob/master/HOWTO/INSTALL-CROSS.md) before attempting to follow the instructions in this guide. + +The whole process takes several hours and depending on the package versions different problems may arise that require additional +fixes not described in this document. In other words, it is not fun to build a toolchain. I assume that you have a Mac and would +like to develop Erlang/OTP applications based on the latest OTP release (or master) that not yet released as a binary for +Raspberry Pi 3. + +The first and most time consuming step is building the toolchain from scratch. Once your cross compiler is ready you cross compile +all library dependencies and create the sysroot file system. In the last step you cross compile Erlang/OTP using the new +toolchain and sysroot. + +#### Tested Configuration + +macOS High Sierra 10.13.2
+Raspberry Pi Model B Rev 1.2
+Crosstools-NG 1.23.0_1 + +> Note: /proc/device/tree/model contains model information of your +> Raspberry Pi. + + +#### Install Crosstool NG + + (1) + + $ brew install crosstool-ng + $ brew install grep --default-names # needed by crosstools-ng scripts + $ brew install md5sha1sum # needed by crosstools-ng populate script + + +#### Create case-sensitive disk images + + (2) + +Create two case-sensitive disk images using Disk Utility: + +`File -> New Image -> Blank Image...` + +Format: `Mac OS Extended (Case-sensitive, Journaled)` + +``` +/Volumes/xtools-build-env 15 GB +/Volumes/xtools           500 MB +``` + +The first image holds all source and object files while building the toolchain. The second image houses the compiled +toolchain. + +## Building the Toolchain + + +#### Configure crosstool-ng + + (4) + + $ ct-ng armv8-rpi3-linux-gnueabihf + $ ct-ng menuconfig + +#### Modify *path* section + +* Local tarballs directory: `/Volumes/xtools-build-env/src` +* Working directory: `/Volumes/xtools-build-env/.build` +* Prefix directory: `/Volumes/xtools/${CT_TARGET}` + +#### Modify *Extracting* section + +* Check option: _Stop after extracting tarballs_. + +> Note: The build shall stop after the tarballs have been extracted to give us time to fix source code problems. + +#### Enable STOP / RESTART + +Edit /Volumes/xtools-build-env/.config +  `CT_DEBUG_CT_SAVE_STEPS=y` + +Should the build break at a particular build step, you can fix the problem and continue the build from where it broke. + +Short summary of the most common `ct-ng` commands: + +* Listing all build steps + +``` +    $ ct-ng list-steps + + Available build steps, in order: + - companion_tools_for_build + - companion_libs_for_build + - binutils_for_build + - companion_tools_for_host + - companion_libs_for_host + - binutils_for_host + - cc_core_pass_1 + - kernel_headers + - libc_start_files + - cc_core_pass_2 + - libc + - cc_for_build + - cc_for_host + - libc_post_cc + - companion_libs_for_target + - binutils_for_target + - debug + - test_suite +    - finish +``` + +* Re-run step +``` +    $ ct-ng step +``` + +* Restart from step +``` +    $ ct-ng step+ +``` + +* Run until step +``` +    $ ct-ng +step +``` + +#### Fix file permissions on crosstool-NG.sh + + (5) + + $ chmod 744 /usr/local/Cellar/crosstool-ng/1.23.0_1/lib/crosstool-ng-1.23.0/scripts/crosstool-NG.sh + +#### Run build command + +Build process stops just after the tarballs have been extracted. + + (6) + + $ ct-ng build + + Retrieving needed toolchain components' tarballs + [EXTRA] Retrieving 'make-4.2.1' + [EXTRA] Retrieving 'm4-1.4.18' + [EXTRA] Retrieving 'linux-4.10.8' + [EXTRA] Retrieving 'gmp-6.1.2' + [EXTRA] Retrieving 'mpfr-3.1.5' + [EXTRA] Retrieving 'isl-0.16.1' + [EXTRA] Retrieving 'mpc-1.0.3' + [EXTRA] Retrieving 'expat-2.2.0' + [EXTRA] Retrieving 'ncurses-6.0' + [EXTRA] Retrieving 'libiconv-1.15' + [EXTRA] Retrieving 'gettext-0.19.8.1' + [EXTRA] Retrieving 'binutils-2.28' + [EXTRA] Retrieving 'gcc-6.3.0' + [EXTRA] Retrieving 'glibc-2.25' + [EXTRA] Retrieving 'gdb-7.12.1' + +#### Fix source files + + (7) + +Add macro to /Volumes/xtools-build-env/.build/src/gdb-7.12.1/gdb/doublest.c: +```C +#define min(a,b) \ + ({ typeof (a) _a = (a); \ + typeof (b) _b = (b); \ +    _a < _b ? _a : _b; }) +``` + +  (8) Update ulimit + + $ ulimit -n 1024 + +#### Modify *extract* section + + (8) + + $ ct-ng menuconfig + + Uncheck option: _Stop after extracting tarballs_ + +#### Re-run build command + +Restarts build process from where it previously stopped. + + (9) + + $ ct-ng build + +#### Fix gettext + +Build will fail at step `companion_tools_for_build` but it can be fixed by running autoreconf: + + (10) + + $ cd .build/src/gettext-0.19.8.1/ + $ ./autoreconf + $ ct-ng companion_tools_for_build+ + +#### Test the toolchain + + (11) + + $ cat > test.c + $ int main() { printf("Hello, world!\n"); return 0; } + $ /Volumes/xtools/arm-unknown-linux-gnueabi-gcc -o test test.c + + (12) OPTIONAL + + “Render the toolchain read-only” from crosstool-NG’s “Paths and misc options” configuration page. + + +## Cross compiling dependencies + + (13) + + $ export PATH=/Volumes/xtools/armv8-rpi3-linux-gnueabihf/bin:$PATH + +#### Cross compiling zlib + + (14) + + $ wget http://zlib.net/zlib-1.2.11.tar.gz + $ tar xf zlib-1.2.11.tar.gz + $ cd zlib-1.2.11 + $ CHOST=armv8-rpi3-linux-gnueabihf ./configure --prefix=/Users//git/raspberrypi/arm + $ make + $ make install + +#### Cross compiling openssl + + (15) + + $ wget http://openssl.org/source/openssl-1.1.0g.tar.gz + $ tar xf openssl-1.1.0g.tar.gz + $ cd openssl-1.1.0g + $ ./Configure linux-generic32 --prefix=/Users//git/raspberrypi/arm --openssldir=/Users//git/raspberrypi/arm/openssl --cross-compile-prefix=armv8-rpi3-linux-gnueabihf + $ make + $ make install + +#### Cross compiling ncurses + + (16) + + $ wget http://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.9.tar.gz + + + (17) + +Apply patch: + +```patch +--- a/ncurses/base/MKlib_gen.sh ++++ b/ncurses/base/MKlib_gen.sh +@@ -474,11 +474,22 @@ sed -n -f $ED1 \ + -e 's/gen_$//' \ + -e 's/ / /g' >>$TMP + ++cat >$ED1 < $ED2 ++cat $ED2 >$TMP ++ + $preprocessor $TMP 2>/dev/null \ +-| sed \ +- -e 's/ / /g' \ +- -e 's/^ //' \ +- -e 's/_Bool/NCURSES_BOOL/g' \ ++| sed -f $ED1 \ + | $AWK -f $AW2 \ + | sed -f $ED3 \ + | sed \ +``` + +  (18) + + $ ./configure --build=x86_64-apple-darwin17.3.0 --host=armv8-rpi3-linux-gnueabihf --without-ada --without-cxx --without-cxx-binding --without-manpages --without-progs --without-tests --prefix=/usr --libdir=/lib --with-build-cc="gcc -D_GNU_SOURCE" --with-shared + $ make + $ make DESTDIR=/Users//git/raspberrypi/arm install + + (19) + +Compile ncurses test program: + + $ cd test + $ armv8-rpi3-linux-gnueabihf-gcc -o nctest ncurses.c -I${RPI_SYSROOT}/usr/include -L${RPI_SYSROOT}/lib -lncursesw + + +## Populating sysroot + + (19) + + Edit /Volumes/xtools/armv8-rpi3-linux-gnueabihf/bin/armv8-rpi3-linux-gnueabihf-populate: + + sed="gsed" + + (20) + + $ armv8-rpi3-linux-gnueabihf-populate -s /Users//git/raspberrypi/arm -d /Users//git/raspberrypi/sysroot + $ export RPI_SYSROOT=/Users//git/raspberrypi/sysroot + + +## Cross compiling Erlang/OTP + + (21) + + $ LC_CTYPE=C && LANG=C && ./otp_build autoconf + $ ./otp_build configure --disable-dynamic-ssl-lib --xcomp-conf=./xcomp/erl-xcomp-armv8-rpi3-linux-gnueabihf.conf + $ ./otp_build boot -a + $ ./otp_build release -a /Users//git/raspberrypi/erlang + $ tar czf erlang.tgz ./erlang + -- cgit v1.2.3