From 84adefa331c4159d432d22840663c38f155cd4c1 Mon Sep 17 00:00:00 2001 From: Erlang/OTP Date: Fri, 20 Nov 2009 14:54:40 +0000 Subject: The R13B03 release. --- erts/emulator/pcre/pcre_exec.c | 5394 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 5394 insertions(+) create mode 100644 erts/emulator/pcre/pcre_exec.c (limited to 'erts/emulator/pcre/pcre_exec.c') diff --git a/erts/emulator/pcre/pcre_exec.c b/erts/emulator/pcre/pcre_exec.c new file mode 100644 index 0000000000..51625130c3 --- /dev/null +++ b/erts/emulator/pcre/pcre_exec.c @@ -0,0 +1,5394 @@ +/************************************************* +* Perl-Compatible Regular Expressions * +*************************************************/ + +/* PCRE is a library of functions to support regular expressions whose syntax +and semantics are as close as possible to those of the Perl 5 language. + + Written by Philip Hazel + Copyright (c) 1997-2008 University of Cambridge + +----------------------------------------------------------------------------- +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of the University of Cambridge nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +----------------------------------------------------------------------------- +*/ +//#define ERLANG_DEBUG 1 + +/* This module contains erts_pcre_exec(), the externally visible function that does +pattern matching using an NFA algorithm, trying to mimic Perl as closely as +possible. There are also some static supporting functions. */ + +/* %ExternalCopyright% */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#define NLBLOCK md /* Block containing newline information */ +#define PSSTART start_subject /* Field containing processed string start */ +#define PSEND end_subject /* Field containing processed string end */ + +#include "pcre_internal.h" + +/* Undefine some potentially clashing cpp symbols */ + +#undef min +#undef max + +/* Flag bits for the match() function */ + +#define match_condassert 0x01 /* Called to check a condition assertion */ +#define match_cbegroup 0x02 /* Could-be-empty unlimited repeat group */ + +/* Non-error returns from the match() function. Error returns are externally +defined PCRE_ERROR_xxx codes, which are all negative. */ + +#define MATCH_MATCH 1 +#define MATCH_NOMATCH 0 + +/* Special internal returns from the match() function. Make them sufficiently +negative to avoid the external error codes. */ + +#define MATCH_COMMIT (-999) +#define MATCH_PRUNE (-998) +#define MATCH_SKIP (-997) +#define MATCH_THEN (-996) + +/* Maximum number of ints of offset to save on the stack for recursive calls. +If the offset vector is bigger, malloc is used. This should be a multiple of 3, +because the offset vector is always a multiple of 3 long. */ + +#define REC_STACK_SAVE_MAX 30 + +/* Min and max values for the common repeats; for the maxima, 0 => infinity */ + +static const char rep_min[] = { 0, 0, 1, 1, 0, 0 }; +static const char rep_max[] = { 0, 0, 0, 0, 1, 1 }; + + + +#ifdef DEBUG +/************************************************* +* Debugging function to print chars * +*************************************************/ + +/* Print a sequence of chars in printable format, stopping at the end of the +subject if the requested. + +Arguments: + p points to characters + length number to print + is_subject TRUE if printing from within md->start_subject + md pointer to matching data block, if is_subject is TRUE + +Returns: nothing +*/ + +static void +pchars(const uschar *p, int length, BOOL is_subject, match_data *md) +{ +unsigned int c; +if (is_subject && length > md->end_subject - p) length = md->end_subject - p; +while (length-- > 0) + if (isprint(c = *(p++))) printf("%c", c); else printf("\\x%02x", c); +} +#endif + +#ifdef ERLANG_INTEGRATION +#ifdef ERLANG_DEBUG +#include +static void +edebug_printf(const char *format, ...) +{ + va_list args; + + va_start(args, format); + fprintf(stderr, "PCRE: "); + vfprintf(stderr, format, args); + va_end(args); + fprintf(stderr, "\r\n"); +} +#endif +#endif + +/************************************************* +* Match a back-reference * +*************************************************/ + +/* If a back reference hasn't been set, the length that is passed is greater +than the number of characters left in the string, so the match fails. + +Arguments: + offset index into the offset vector + eptr points into the subject + length length to be matched + md points to match data block + ims the ims flags + +Returns: TRUE if matched +*/ + +static BOOL +match_ref(int offset, register USPTR eptr, int length, match_data *md, + unsigned long int ims) +{ +USPTR p = md->start_subject + md->offset_vector[offset]; + +#ifdef DEBUG +if (eptr >= md->end_subject) + printf("matching subject "); +else + { + printf("matching subject "); + pchars(eptr, length, TRUE, md); + } +printf(" against backref "); +pchars(p, length, FALSE, md); +printf("\n"); +#endif + +/* Always fail if not enough characters left */ + +if (length > md->end_subject - eptr) return FALSE; + +/* Separate the caselesss case for speed */ + +if ((ims & PCRE_CASELESS) != 0) + { + while (length-- > 0) + if (md->lcc[*p++] != md->lcc[*eptr++]) return FALSE; + } +else + { while (length-- > 0) if (*p++ != *eptr++) return FALSE; } + +return TRUE; +} + + + +/*************************************************************************** +**************************************************************************** + RECURSION IN THE match() FUNCTION + +The match() function is highly recursive, though not every recursive call +increases the recursive depth. Nevertheless, some regular expressions can cause +it to recurse to a great depth. I was writing for Unix, so I just let it call +itself recursively. This uses the stack for saving everything that has to be +saved for a recursive call. On Unix, the stack can be large, and this works +fine. + +It turns out that on some non-Unix-like systems there are problems with +programs that use a lot of stack. (This despite the fact that every last chip +has oodles of memory these days, and techniques for extending the stack have +been known for decades.) So.... + +There is a fudge, triggered by defining NO_RECURSE, which avoids recursive +calls by keeping local variables that need to be preserved in blocks of memory +obtained from malloc() instead instead of on the stack. Macros are used to +achieve this so that the actual code doesn't look very different to what it +always used to. + +The original heap-recursive code used longjmp(). However, it seems that this +can be very slow on some operating systems. Following a suggestion from Stan +Switzer, the use of longjmp() has been abolished, at the cost of having to +provide a unique number for each call to RMATCH. There is no way of generating +a sequence of numbers at compile time in C. I have given them names, to make +them stand out more clearly. + +Crude tests on x86 Linux show a small speedup of around 5-8%. However, on +FreeBSD, avoiding longjmp() more than halves the time taken to run the standard +tests. Furthermore, not using longjmp() means that local dynamic variables +don't have indeterminate values; this has meant that the frame size can be +reduced because the result can be "passed back" by straight setting of the +variable instead of being passed in the frame. +**************************************************************************** +***************************************************************************/ + +/* Numbers for RMATCH calls. When this list is changed, the code at HEAP_RETURN +below must be updated in sync. */ + +enum { RM1=1, RM2, RM3, RM4, RM5, RM6, RM7, RM8, RM9, RM10, + RM11, RM12, RM13, RM14, RM15, RM16, RM17, RM18, RM19, RM20, + RM21, RM22, RM23, RM24, RM25, RM26, RM27, RM28, RM29, RM30, + RM31, RM32, RM33, RM34, RM35, RM36, RM37, RM38, RM39, RM40, + RM41, RM42, RM43, RM44, RM45, RM46, RM47, RM48, RM49, RM50, + RM51, RM52, RM53, RM54 +}; +/* These versions of the macros use the stack, as normal. There are debugging +versions and production versions. Note that the "rw" argument of RMATCH isn't +actuall used in this definition. */ + +#ifndef NO_RECURSE +#ifdef ERLANG_INTEGRATION +#error ERLANG_INTEGRATION only together with NO_RECURSE +#endif +#define REGISTER register + +#ifdef DEBUG +#define RMATCH(ra,rb,rc,rd,re,rf,rg,rw) \ + { \ + printf("match() called in line %d\n", __LINE__); \ + rrc = match(ra,rb,mstart,rc,rd,re,rf,rg,rdepth+1); \ + printf("to line %d\n", __LINE__); \ + } +#define RRETURN(ra) \ + { \ + printf("match() returned %d from line %d ", ra, __LINE__); \ + return ra; \ + } +#else +#define RMATCH(ra,rb,rc,rd,re,rf,rg,rw) \ + rrc = match(ra,rb,mstart,rc,rd,re,rf,rg,rdepth+1) +#define RRETURN(ra) return ra +#endif + +#else + + +/* These versions of the macros manage a private stack on the heap. Note that +the "rd" argument of RMATCH isn't actually used in this definition. It's the md +argument of match(), which never changes. */ + +#define REGISTER + +#define RMATCH(ra,rb,rc,rd,re,rf,rg,rw)\ + {\ + heapframe *newframe = (erts_pcre_stack_malloc)(sizeof(heapframe));\ + frame->Xwhere = rw; \ + newframe->Xeptr = ra;\ + newframe->Xecode = rb;\ + newframe->Xmstart = mstart;\ + newframe->Xoffset_top = rc;\ + newframe->Xims = re;\ + newframe->Xeptrb = rf;\ + newframe->Xflags = rg;\ + newframe->Xrdepth = frame->Xrdepth + 1;\ + newframe->Xprevframe = frame;\ + frame = newframe;\ + DPRINTF(("restarting from line %d\n", __LINE__));\ + goto HEAP_RECURSE;\ + L_##rw:\ + DPRINTF(("jumped back to line %d\n", __LINE__));\ + } + +#ifdef ERLANG_INTEGRATION +#define RRETURN(ra)\ + {\ + heapframe *newframe = frame;\ + frame = newframe->Xprevframe;\ + (erts_pcre_stack_free)(newframe);\ + if (frame != NULL)\ + {\ + rrc = ra;\ + goto HEAP_RETURN;\ + }\ + if (LOOP_LIMIT != 0) \ + { \ + md->loop_limit -= LOOP_COUNT; \ + } \ + return ra;\ + } +#else +#define RRETURN(ra)\ + {\ + heapframe *newframe = frame;\ + frame = newframe->Xprevframe;\ + (erts_pcre_stack_free)(newframe);\ + if (frame != NULL)\ + {\ + rrc = ra;\ + goto HEAP_RETURN;\ + }\ + return ra;\ + } +#endif + + +/* Structure for remembering the local variables in a private frame */ + +typedef struct heapframe { + struct heapframe *Xprevframe; + + /* Function arguments that may change */ + + const uschar *Xeptr; + const uschar *Xecode; + const uschar *Xmstart; + int Xoffset_top; + long int Xims; + eptrblock *Xeptrb; + int Xflags; + unsigned int Xrdepth; + + /* Function local variables */ + + const uschar *Xcallpat; + const uschar *Xcharptr; + const uschar *Xdata; + const uschar *Xnext; + const uschar *Xpp; + const uschar *Xprev; + const uschar *Xsaved_eptr; + + recursion_info Xnew_recursive; + + BOOL Xcur_is_word; + BOOL Xcondition; + BOOL Xprev_is_word; + + unsigned long int Xoriginal_ims; + +#ifdef SUPPORT_UCP + int Xprop_type; + int Xprop_value; + int Xprop_fail_result; + int Xprop_category; + int Xprop_chartype; + int Xprop_script; + int Xoclength; + uschar Xocchars[8]; +#endif + + int Xctype; + unsigned int Xfc; + int Xfi; + int Xlength; + int Xmax; + int Xmin; + int Xnumber; + int Xoffset; + int Xop; + int Xsave_capture_last; + int Xsave_offset1, Xsave_offset2, Xsave_offset3; + int Xstacksave[REC_STACK_SAVE_MAX]; + + eptrblock Xnewptrb; + + /* Where to jump back to */ + + int Xwhere; + +} heapframe; + +#endif + + +/*************************************************************************** +***************************************************************************/ + + + +/************************************************* +* Match from current position * +*************************************************/ + +/* This function is called recursively in many circumstances. Whenever it +returns a negative (error) response, the outer incarnation must also return the +same response. + +Performance note: It might be tempting to extract commonly used fields from the +md structure (e.g. utf8, end_subject) into individual variables to improve +performance. Tests using gcc on a SPARC disproved this; in the first case, it +made performance worse. + +Arguments: + eptr pointer to current character in subject + ecode pointer to current position in compiled code + mstart pointer to the current match start position (can be modified + by encountering \K) + offset_top current top pointer + md pointer to "static" info for the match + ims current /i, /m, and /s options + eptrb pointer to chain of blocks containing eptr at start of + brackets - for testing for empty matches + flags can contain + match_condassert - this is an assertion condition + match_cbegroup - this is the start of an unlimited repeat + group that can match an empty string + rdepth the recursion depth + +Returns: MATCH_MATCH if matched ) these values are >= 0 + MATCH_NOMATCH if failed to match ) + a negative PCRE_ERROR_xxx value if aborted by an error condition + (e.g. stopped by repeated call or recursion limit) +*/ + +static int +match(REGISTER USPTR eptr, REGISTER const uschar *ecode, const uschar *mstart, + int offset_top, match_data *md, unsigned long int ims, eptrblock *eptrb, + int flags, unsigned int rdepth) +{ +/* These variables do not need to be preserved over recursion in this function, +so they can be ordinary variables in all cases. Mark some of them with +"register" because they are used a lot in loops. */ + +register int rrc; /* Returns from recursive calls */ +register int i; /* Used for loops not involving calls to RMATCH() */ +register unsigned int c; /* Character values not kept over RMATCH() calls */ +register BOOL utf8; /* Local copy of UTF-8 flag for speed */ + +BOOL minimize, possessive; /* Quantifier options */ + +/* When recursion is not being used, all "local" variables that have to be +preserved over calls to RMATCH() are part of a "frame" which is obtained from +heap storage. Set up the top-level frame here; others are obtained from the +heap whenever RMATCH() does a "recursion". See the macro definitions above. */ + +#ifdef NO_RECURSE +#ifdef ERLANG_INTEGRATION +#define LOOP_COUNT loop_count +#define LOOP_LIMIT loop_limit +#ifdef ERLANG_DEBUG +#define EDEBUGF(X) edebug_printf X +#else +#define EDEBUGF(X) +#endif +#define COST(N) (LOOP_COUNT += (N)) +#define LABEL_XCAT(A,B) A##B +#define LABEL_CAT(A,B) LABEL_XCAT(A,B) + +#define COST_CHK(N) \ +do { \ + LOOP_COUNT += (N); \ + if (LOOP_LIMIT != 0) { \ + if (LOOP_COUNT > LOOP_LIMIT) { \ + frame->Xwhere = __LINE__ + 100; \ + goto LOOP_COUNT_BREAK; \ + LABEL_CAT(L_LOOP_COUNT_,__LINE__): \ + ; \ + } \ + } \ +} while (0) + +register int loop_count = 0; +register int loop_limit = md->loop_limit; +heapframe *frame; +if (md->state_save) { + frame = md->state_save; + /* ASSERT(frame != NULL); */ + EDEBUGF(("Break restore!")); + goto LOOP_COUNT_RETURN; +} +frame = (erts_pcre_stack_malloc)(sizeof(heapframe)); +#else +#define COST(N) +#define COST_CHK(N) +heapframe *frame = (erts_pcre_stack_malloc)(sizeof(heapframe)); +#endif + +frame->Xprevframe = NULL; /* Marks the top level */ + +/* Copy in the original argument variables */ + +frame->Xeptr = eptr; +frame->Xecode = ecode; +frame->Xmstart = mstart; +frame->Xoffset_top = offset_top; +frame->Xims = ims; +frame->Xeptrb = eptrb; +frame->Xflags = flags; +frame->Xrdepth = rdepth; + +/* This is where control jumps back to to effect "recursion" */ + +HEAP_RECURSE: + +/* Macros make the argument variables come from the current frame */ + +#define eptr frame->Xeptr +#define ecode frame->Xecode +#define mstart frame->Xmstart +#define offset_top frame->Xoffset_top +#define ims frame->Xims +#define eptrb frame->Xeptrb +#define flags frame->Xflags +#define rdepth frame->Xrdepth + +/* Ditto for the local variables */ + +#ifdef SUPPORT_UTF8 +#define charptr frame->Xcharptr +#endif +#define callpat frame->Xcallpat +#define data frame->Xdata +#define next frame->Xnext +#define pp frame->Xpp +#define prev frame->Xprev +#define saved_eptr frame->Xsaved_eptr + +#define new_recursive frame->Xnew_recursive + +#define cur_is_word frame->Xcur_is_word +#define condition frame->Xcondition +#define prev_is_word frame->Xprev_is_word + +#define original_ims frame->Xoriginal_ims + +#ifdef SUPPORT_UCP +#define prop_type frame->Xprop_type +#define prop_value frame->Xprop_value +#define prop_fail_result frame->Xprop_fail_result +#define prop_category frame->Xprop_category +#define prop_chartype frame->Xprop_chartype +#define prop_script frame->Xprop_script +#define oclength frame->Xoclength +#define occhars frame->Xocchars +#endif + +#define ctype frame->Xctype +#define fc frame->Xfc +#define fi frame->Xfi +#define length frame->Xlength +#define max frame->Xmax +#define min frame->Xmin +#define number frame->Xnumber +#define offset frame->Xoffset +#define op frame->Xop +#define save_capture_last frame->Xsave_capture_last +#define save_offset1 frame->Xsave_offset1 +#define save_offset2 frame->Xsave_offset2 +#define save_offset3 frame->Xsave_offset3 +#define stacksave frame->Xstacksave + +#define newptrb frame->Xnewptrb + +/* When recursion is being used, local variables are allocated on the stack and +get preserved during recursion in the normal way. In this environment, fi and +i, and fc and c, can be the same variables. */ + +#else /* NO_RECURSE not defined */ +#define COST(N) +#define COST_CHK(N) +#define fi i +#define fc c + + +#ifdef SUPPORT_UTF8 /* Many of these variables are used only */ +const uschar *charptr; /* in small blocks of the code. My normal */ +#endif /* style of coding would have declared */ +const uschar *callpat; /* them within each of those blocks. */ +const uschar *data; /* However, in order to accommodate the */ +const uschar *next; /* version of this code that uses an */ +USPTR pp; /* external "stack" implemented on the */ +const uschar *prev; /* heap, it is easier to declare them all */ +USPTR saved_eptr; /* here, so the declarations can be cut */ + /* out in a block. The only declarations */ +recursion_info new_recursive; /* within blocks below are for variables */ + /* that do not have to be preserved over */ +BOOL cur_is_word; /* a recursive call to RMATCH(). */ +BOOL condition; +BOOL prev_is_word; + +unsigned long int original_ims; + +#ifdef SUPPORT_UCP +int prop_type; +int prop_value; +int prop_fail_result; +int prop_category; +int prop_chartype; +int prop_script; +int oclength; +uschar occhars[8]; +#endif + +int ctype; +int length; +int max; +int min; +int number; +int offset; +int op; +int save_capture_last; +int save_offset1, save_offset2, save_offset3; +int stacksave[REC_STACK_SAVE_MAX]; + +eptrblock newptrb; +#endif /* NO_RECURSE */ + +/* These statements are here to stop the compiler complaining about unitialized +variables. */ + +#ifdef SUPPORT_UCP +prop_value = 0; +prop_fail_result = 0; +#endif + + +/* This label is used for tail recursion, which is used in a few cases even +when NO_RECURSE is not defined, in order to reduce the amount of stack that is +used. Thanks to Ian Taylor for noticing this possibility and sending the +original patch. */ + +TAIL_RECURSE: + +/* OK, now we can get on with the real code of the function. Recursive calls +are specified by the macro RMATCH and RRETURN is used to return. When +NO_RECURSE is *not* defined, these just turn into a recursive call to match() +and a "return", respectively (possibly with some debugging if DEBUG is +defined). However, RMATCH isn't like a function call because it's quite a +complicated macro. It has to be used in one particular way. This shouldn't, +however, impact performance when true recursion is being used. */ + +#ifdef SUPPORT_UTF8 +utf8 = md->utf8; /* Local copy of the flag */ +#else +utf8 = FALSE; +#endif + +/* First check that we haven't called match() too many times, or that we +haven't exceeded the recursive call limit. */ + +if (md->match_call_count++ >= md->match_limit) RRETURN(PCRE_ERROR_MATCHLIMIT); +if (rdepth >= md->match_limit_recursion) RRETURN(PCRE_ERROR_RECURSIONLIMIT); + +original_ims = ims; /* Save for resetting on ')' */ + +/* At the start of a group with an unlimited repeat that may match an empty +string, the match_cbegroup flag is set. When this is the case, add the current +subject pointer to the chain of such remembered pointers, to be checked when we +hit the closing ket, in order to break infinite loops that match no characters. +When match() is called in other circumstances, don't add to the chain. The +match_cbegroup flag must NOT be used with tail recursion, because the memory +block that is used is on the stack, so a new one may be required for each +match(). */ + +if ((flags & match_cbegroup) != 0) + { + newptrb.epb_saved_eptr = eptr; + newptrb.epb_prev = eptrb; + eptrb = &newptrb; + } + +/* Now start processing the opcodes. */ + +for (;;) + { + COST_CHK(1); + minimize = possessive = FALSE; + op = *ecode; + EDEBUGF(("Op = %d",op)); + + /* For partial matching, remember if we ever hit the end of the subject after + matching at least one subject character. */ + + if (md->partial && + eptr >= md->end_subject && + eptr > mstart) + md->hitend = TRUE; + + switch(op) + { + case OP_FAIL: + RRETURN(MATCH_NOMATCH); + + case OP_PRUNE: + RMATCH(eptr, ecode + _erts_pcre_OP_lengths[*ecode], offset_top, md, + ims, eptrb, flags, RM51); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + RRETURN(MATCH_PRUNE); + + case OP_COMMIT: + RMATCH(eptr, ecode + _erts_pcre_OP_lengths[*ecode], offset_top, md, + ims, eptrb, flags, RM52); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + RRETURN(MATCH_COMMIT); + + case OP_SKIP: + RMATCH(eptr, ecode + _erts_pcre_OP_lengths[*ecode], offset_top, md, + ims, eptrb, flags, RM53); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + md->start_match_ptr = eptr; /* Pass back current position */ + RRETURN(MATCH_SKIP); + + case OP_THEN: + RMATCH(eptr, ecode + _erts_pcre_OP_lengths[*ecode], offset_top, md, + ims, eptrb, flags, RM54); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + RRETURN(MATCH_THEN); + + /* Handle a capturing bracket. If there is space in the offset vector, save + the current subject position in the working slot at the top of the vector. + We mustn't change the current values of the data slot, because they may be + set from a previous iteration of this group, and be referred to by a + reference inside the group. + + If the bracket fails to match, we need to restore this value and also the + values of the final offsets, in case they were set by a previous iteration + of the same bracket. + + If there isn't enough space in the offset vector, treat this as if it were + a non-capturing bracket. Don't worry about setting the flag for the error + case here; that is handled in the code for KET. */ + + case OP_CBRA: + case OP_SCBRA: + number = GET2(ecode, 1+LINK_SIZE); + offset = number << 1; + +#ifdef DEBUG + printf("start bracket %d\n", number); + printf("subject="); + pchars(eptr, 16, TRUE, md); + printf("\n"); +#endif + + if (offset < md->offset_max) + { + save_offset1 = md->offset_vector[offset]; + save_offset2 = md->offset_vector[offset+1]; + save_offset3 = md->offset_vector[md->offset_end - number]; + save_capture_last = md->capture_last; + + DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3)); + md->offset_vector[md->offset_end - number] = eptr - md->start_subject; + + flags = (op == OP_SCBRA)? match_cbegroup : 0; + do /* PaN: OK */ + { + RMATCH(eptr, ecode + _erts_pcre_OP_lengths[*ecode], offset_top, md, + ims, eptrb, flags, RM1); + if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc); + md->capture_last = save_capture_last; + ecode += GET(ecode, 1); + } + while (*ecode == OP_ALT); + + DPRINTF(("bracket %d failed\n", number)); + + md->offset_vector[offset] = save_offset1; + md->offset_vector[offset+1] = save_offset2; + md->offset_vector[md->offset_end - number] = save_offset3; + + RRETURN(MATCH_NOMATCH); + } + + /* FALL THROUGH ... Insufficient room for saving captured contents. Treat + as a non-capturing bracket. */ + + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + + DPRINTF(("insufficient capture room: treat as non-capturing\n")); + + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + /* VVVVVVVVVVVVVVVVVVVVVVVVV */ + + /* Non-capturing bracket. Loop for all the alternatives. When we get to the + final alternative within the brackets, we would return the result of a + recursive call to match() whatever happened. We can reduce stack usage by + turning this into a tail recursion, except in the case when match_cbegroup + is set.*/ + + case OP_BRA: + case OP_SBRA: + DPRINTF(("start non-capturing bracket\n")); + flags = (op >= OP_SBRA)? match_cbegroup : 0; + for (;;) /* PaN: OK */ + { + if (ecode[GET(ecode, 1)] != OP_ALT) /* Final alternative */ + { + if (flags == 0) /* Not a possibly empty group */ + { + ecode += _erts_pcre_OP_lengths[*ecode]; + DPRINTF(("bracket 0 tail recursion\n")); + goto TAIL_RECURSE; + } + + /* Possibly empty group; can't use tail recursion. */ + + RMATCH(eptr, ecode + _erts_pcre_OP_lengths[*ecode], offset_top, md, ims, + eptrb, flags, RM48); + RRETURN(rrc); + } + + /* For non-final alternatives, continue the loop for a NOMATCH result; + otherwise return. */ + + RMATCH(eptr, ecode + _erts_pcre_OP_lengths[*ecode], offset_top, md, ims, + eptrb, flags, RM2); + if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc); + ecode += GET(ecode, 1); + } + /* Control never reaches here. */ + + /* Conditional group: compilation checked that there are no more than + two branches. If the condition is false, skipping the first branch takes us + past the end if there is only one branch, but that's OK because that is + exactly what going to the ket would do. As there is only one branch to be + obeyed, we can use tail recursion to avoid using another stack frame. */ + + case OP_COND: + case OP_SCOND: + if (ecode[LINK_SIZE+1] == OP_RREF) /* Recursion test */ + { + offset = GET2(ecode, LINK_SIZE + 2); /* Recursion group number*/ + condition = md->recursive != NULL && + (offset == RREF_ANY || offset == md->recursive->group_num); + ecode += condition? 3 : GET(ecode, 1); + } + + else if (ecode[LINK_SIZE+1] == OP_CREF) /* Group used test */ + { + offset = GET2(ecode, LINK_SIZE+2) << 1; /* Doubled ref number */ + condition = offset < offset_top && md->offset_vector[offset] >= 0; + ecode += condition? 3 : GET(ecode, 1); + } + + else if (ecode[LINK_SIZE+1] == OP_DEF) /* DEFINE - always false */ + { + condition = FALSE; + ecode += GET(ecode, 1); + } + + /* The condition is an assertion. Call match() to evaluate it - setting + the final argument match_condassert causes it to stop at the end of an + assertion. */ + + else + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL, + match_condassert, RM3); + if (rrc == MATCH_MATCH) + { + condition = TRUE; + ecode += 1 + LINK_SIZE + GET(ecode, LINK_SIZE + 2); + while (*ecode == OP_ALT) ecode += GET(ecode, 1); /* PaN: Check */ + } + else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) + { + RRETURN(rrc); /* Need braces because of following else */ + } + else + { + condition = FALSE; + ecode += GET(ecode, 1); + } + } + + /* We are now at the branch that is to be obeyed. As there is only one, + we can use tail recursion to avoid using another stack frame, except when + match_cbegroup is required for an unlimited repeat of a possibly empty + group. If the second alternative doesn't exist, we can just plough on. */ + + if (condition || *ecode == OP_ALT) + { + ecode += 1 + LINK_SIZE; + if (op == OP_SCOND) /* Possibly empty group */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, match_cbegroup, RM49); + RRETURN(rrc); + } + else /* Group must match something */ + { + flags = 0; + goto TAIL_RECURSE; + } + } + else /* Condition false & no 2nd alternative */ + { + ecode += 1 + LINK_SIZE; + } + break; + + + /* End of the pattern, either real or forced. If we are in a top-level + recursion, we should restore the offsets appropriately and continue from + after the call. */ + + case OP_ACCEPT: + case OP_END: + if (md->recursive != NULL && md->recursive->group_num == 0) + { + recursion_info *rec = md->recursive; + DPRINTF(("End of pattern in a (?0) recursion\n")); + md->recursive = rec->prevrec; + memmove(md->offset_vector, rec->offset_save, + rec->saved_max * sizeof(int)); + mstart = rec->save_start; + ims = original_ims; + ecode = rec->after_call; + break; + } + + /* Otherwise, if PCRE_NOTEMPTY is set, fail if we have matched an empty + string - backtracking will then try other alternatives, if any. */ + + if (md->notempty && eptr == mstart) RRETURN(MATCH_NOMATCH); + md->end_match_ptr = eptr; /* Record where we ended */ + md->end_offset_top = offset_top; /* and how many extracts were taken */ + md->start_match_ptr = mstart; /* and the start (\K can modify) */ + RRETURN(MATCH_MATCH); + + /* Change option settings */ + + case OP_OPT: + ims = ecode[1]; + ecode += 2; + DPRINTF(("ims set to %02lx\n", ims)); + break; + + /* Assertion brackets. Check the alternative branches in turn - the + matching won't pass the KET for an assertion. If any one branch matches, + the assertion is true. Lookbehind assertions have an OP_REVERSE item at the + start of each branch to move the current point backwards, so the code at + this level is identical to the lookahead case. */ + + case OP_ASSERT: + case OP_ASSERTBACK: + do /* PaN: OK */ + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL, 0, + RM4); + if (rrc == MATCH_MATCH) break; + if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc); + ecode += GET(ecode, 1); + } + while (*ecode == OP_ALT); + if (*ecode == OP_KET) RRETURN(MATCH_NOMATCH); + + /* If checking an assertion for a condition, return MATCH_MATCH. */ + + if ((flags & match_condassert) != 0) RRETURN(MATCH_MATCH); + + /* Continue from after the assertion, updating the offsets high water + mark, since extracts may have been taken during the assertion. */ + + do ecode += GET(ecode,1); while (*ecode == OP_ALT); /* PaN: OK */ + ecode += 1 + LINK_SIZE; + offset_top = md->end_offset_top; + continue; + + /* Negative assertion: all branches must fail to match */ + + case OP_ASSERT_NOT: + case OP_ASSERTBACK_NOT: + do /* PaN: OK */ + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL, 0, + RM5); + if (rrc == MATCH_MATCH) RRETURN(MATCH_NOMATCH); + if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc); + ecode += GET(ecode,1); + } + while (*ecode == OP_ALT); + + if ((flags & match_condassert) != 0) RRETURN(MATCH_MATCH); + + ecode += 1 + LINK_SIZE; + continue; + + /* Move the subject pointer back. This occurs only at the start of + each branch of a lookbehind assertion. If we are too close to the start to + move back, this match function fails. When working with UTF-8 we move + back a number of characters, not bytes. */ + + case OP_REVERSE: +#ifdef SUPPORT_UTF8 + if (utf8) + { + i = GET(ecode, 1); + COST(i); + while (i-- > 0) /* PaN: OK */ + { + eptr--; + if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH); + BACKCHAR(eptr); + } + } + else +#endif + + /* No UTF-8 support, or not in UTF-8 mode: count is byte count */ + + { + eptr -= GET(ecode, 1); + if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH); + } + + /* Skip to next op code */ + + ecode += 1 + LINK_SIZE; + break; + + /* The callout item calls an external function, if one is provided, passing + details of the match so far. This is mainly for debugging, though the + function is able to force a failure. */ + + case OP_CALLOUT: + if (erts_pcre_callout != NULL) + { + pcre_callout_block cb; + cb.version = 1; /* Version 1 of the callout block */ + cb.callout_number = ecode[1]; + cb.offset_vector = md->offset_vector; + cb.subject = (PCRE_SPTR)md->start_subject; + cb.subject_length = md->end_subject - md->start_subject; + cb.start_match = mstart - md->start_subject; + cb.current_position = eptr - md->start_subject; + cb.pattern_position = GET(ecode, 2); + cb.next_item_length = GET(ecode, 2 + LINK_SIZE); + cb.capture_top = offset_top/2; + cb.capture_last = md->capture_last; + cb.callout_data = md->callout_data; + if ((rrc = (*erts_pcre_callout)(&cb)) > 0) RRETURN(MATCH_NOMATCH); + if (rrc < 0) RRETURN(rrc); + } + ecode += 2 + 2*LINK_SIZE; + break; + + /* Recursion either matches the current regex, or some subexpression. The + offset data is the offset to the starting bracket from the start of the + whole pattern. (This is so that it works from duplicated subpatterns.) + + If there are any capturing brackets started but not finished, we have to + save their starting points and reinstate them after the recursion. However, + we don't know how many such there are (offset_top records the completed + total) so we just have to save all the potential data. There may be up to + 65535 such values, which is too large to put on the stack, but using malloc + for small numbers seems expensive. As a compromise, the stack is used when + there are no more than REC_STACK_SAVE_MAX values to store; otherwise malloc + is used. A problem is what to do if the malloc fails ... there is no way of + returning to the top level with an error. Save the top REC_STACK_SAVE_MAX + values on the stack, and accept that the rest may be wrong. + + There are also other values that have to be saved. We use a chained + sequence of blocks that actually live on the stack. Thanks to Robin Houston + for the original version of this logic. */ + + case OP_RECURSE: + { + callpat = md->start_code + GET(ecode, 1); + new_recursive.group_num = (callpat == md->start_code)? 0 : + GET2(callpat, 1 + LINK_SIZE); + + /* Add to "recursing stack" */ + + new_recursive.prevrec = md->recursive; + md->recursive = &new_recursive; + + /* Find where to continue from afterwards */ + + ecode += 1 + LINK_SIZE; + new_recursive.after_call = ecode; + + /* Now save the offset data. */ + + new_recursive.saved_max = md->offset_end; + if (new_recursive.saved_max <= REC_STACK_SAVE_MAX) + new_recursive.offset_save = stacksave; + else + { + new_recursive.offset_save = + (int *)(erts_pcre_malloc)(new_recursive.saved_max * sizeof(int)); + if (new_recursive.offset_save == NULL) RRETURN(PCRE_ERROR_NOMEMORY); + } + + memcpy(new_recursive.offset_save, md->offset_vector, + new_recursive.saved_max * sizeof(int)); + new_recursive.save_start = mstart; + mstart = eptr; + + /* OK, now we can do the recursion. For each top-level alternative we + restore the offset and recursion data. */ + + DPRINTF(("Recursing into group %d\n", new_recursive.group_num)); + flags = (*callpat >= OP_SBRA)? match_cbegroup : 0; + do /* PaN: OK */ + { + RMATCH(eptr, callpat + _erts_pcre_OP_lengths[*callpat], offset_top, + md, ims, eptrb, flags, RM6); + if (rrc == MATCH_MATCH) + { + DPRINTF(("Recursion matched\n")); + md->recursive = new_recursive.prevrec; + if (new_recursive.offset_save != stacksave) + (erts_pcre_free)(new_recursive.offset_save); + RRETURN(MATCH_MATCH); + } + else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) + { + DPRINTF(("Recursion gave error %d\n", rrc)); + RRETURN(rrc); + } + + md->recursive = &new_recursive; + memcpy(md->offset_vector, new_recursive.offset_save, + new_recursive.saved_max * sizeof(int)); + callpat += GET(callpat, 1); + } + while (*callpat == OP_ALT); + + DPRINTF(("Recursion didn't match\n")); + md->recursive = new_recursive.prevrec; + if (new_recursive.offset_save != stacksave) + (erts_pcre_free)(new_recursive.offset_save); + RRETURN(MATCH_NOMATCH); + } + /* Control never reaches here */ + + /* "Once" brackets are like assertion brackets except that after a match, + the point in the subject string is not moved back. Thus there can never be + a move back into the brackets. Friedl calls these "atomic" subpatterns. + Check the alternative branches in turn - the matching won't pass the KET + for this kind of subpattern. If any one branch matches, we carry on as at + the end of a normal bracket, leaving the subject pointer. */ + + case OP_ONCE: + prev = ecode; + saved_eptr = eptr; + + do /* PaN: OK */ + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, 0, RM7); + if (rrc == MATCH_MATCH) break; + if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc); + ecode += GET(ecode,1); + } + while (*ecode == OP_ALT); + + /* If hit the end of the group (which could be repeated), fail */ + + if (*ecode != OP_ONCE && *ecode != OP_ALT) RRETURN(MATCH_NOMATCH); + + /* Continue as from after the assertion, updating the offsets high water + mark, since extracts may have been taken. */ + + do ecode += GET(ecode, 1); while (*ecode == OP_ALT); /* PaN: OK */ + + offset_top = md->end_offset_top; + eptr = md->end_match_ptr; + + /* For a non-repeating ket, just continue at this level. This also + happens for a repeating ket if no characters were matched in the group. + This is the forcible breaking of infinite loops as implemented in Perl + 5.005. If there is an options reset, it will get obeyed in the normal + course of events. */ + + if (*ecode == OP_KET || eptr == saved_eptr) + { + ecode += 1+LINK_SIZE; + break; + } + + /* The repeating kets try the rest of the pattern or restart from the + preceding bracket, in the appropriate order. The second "call" of match() + uses tail recursion, to avoid using another stack frame. We need to reset + any options that changed within the bracket before re-running it, so + check the next opcode. */ + + if (ecode[1+LINK_SIZE] == OP_OPT) + { + ims = (ims & ~PCRE_IMS) | ecode[4]; + DPRINTF(("ims set to %02lx at group repeat\n", ims)); + } + + if (*ecode == OP_KETRMIN) + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, 0, RM8); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + ecode = prev; + flags = 0; + goto TAIL_RECURSE; + } + else /* OP_KETRMAX */ + { + RMATCH(eptr, prev, offset_top, md, ims, eptrb, match_cbegroup, RM9); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + ecode += 1 + LINK_SIZE; + flags = 0; + goto TAIL_RECURSE; + } + /* Control never gets here */ + + /* An alternation is the end of a branch; scan along to find the end of the + bracketed group and go to there. */ + + case OP_ALT: + do ecode += GET(ecode,1); while (*ecode == OP_ALT); /* PaN: OK */ + break; + + /* BRAZERO and BRAMINZERO occur just before a bracket group, indicating + that it may occur zero times. It may repeat infinitely, or not at all - + i.e. it could be ()* or ()? in the pattern. Brackets with fixed upper + repeat limits are compiled as a number of copies, with the optional ones + preceded by BRAZERO or BRAMINZERO. */ + + case OP_BRAZERO: + { + next = ecode+1; + RMATCH(eptr, next, offset_top, md, ims, eptrb, 0, RM10); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + do next += GET(next,1); while (*next == OP_ALT); /* PaN: OK */ + ecode = next + 1 + LINK_SIZE; + } + break; + + case OP_BRAMINZERO: + { + next = ecode+1; + do next += GET(next, 1); while (*next == OP_ALT); /* PaN: OK */ + RMATCH(eptr, next + 1+LINK_SIZE, offset_top, md, ims, eptrb, 0, RM11); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + ecode++; + } + break; + + /* End of a group, repeated or non-repeating. */ + + case OP_KET: + case OP_KETRMIN: + case OP_KETRMAX: + prev = ecode - GET(ecode, 1); + + /* If this was a group that remembered the subject start, in order to break + infinite repeats of empty string matches, retrieve the subject start from + the chain. Otherwise, set it NULL. */ + + if (*prev >= OP_SBRA) + { + saved_eptr = eptrb->epb_saved_eptr; /* Value at start of group */ + eptrb = eptrb->epb_prev; /* Backup to previous group */ + } + else saved_eptr = NULL; + + /* If we are at the end of an assertion group, stop matching and return + MATCH_MATCH, but record the current high water mark for use by positive + assertions. Do this also for the "once" (atomic) groups. */ + + if (*prev == OP_ASSERT || *prev == OP_ASSERT_NOT || + *prev == OP_ASSERTBACK || *prev == OP_ASSERTBACK_NOT || + *prev == OP_ONCE) + { + md->end_match_ptr = eptr; /* For ONCE */ + md->end_offset_top = offset_top; + RRETURN(MATCH_MATCH); + } + + /* For capturing groups we have to check the group number back at the start + and if necessary complete handling an extraction by setting the offsets and + bumping the high water mark. Note that whole-pattern recursion is coded as + a recurse into group 0, so it won't be picked up here. Instead, we catch it + when the OP_END is reached. Other recursion is handled here. */ + + if (*prev == OP_CBRA || *prev == OP_SCBRA) + { + number = GET2(prev, 1+LINK_SIZE); + offset = number << 1; + +#ifdef DEBUG + printf("end bracket %d", number); + printf("\n"); +#endif + + md->capture_last = number; + if (offset >= md->offset_max) md->offset_overflow = TRUE; else + { + md->offset_vector[offset] = + md->offset_vector[md->offset_end - number]; + md->offset_vector[offset+1] = eptr - md->start_subject; + if (offset_top <= offset) offset_top = offset + 2; + } + + /* Handle a recursively called group. Restore the offsets + appropriately and continue from after the call. */ + + if (md->recursive != NULL && md->recursive->group_num == number) + { + recursion_info *rec = md->recursive; + DPRINTF(("Recursion (%d) succeeded - continuing\n", number)); + md->recursive = rec->prevrec; + mstart = rec->save_start; + memcpy(md->offset_vector, rec->offset_save, + rec->saved_max * sizeof(int)); + ecode = rec->after_call; + ims = original_ims; + break; + } + } + + /* For both capturing and non-capturing groups, reset the value of the ims + flags, in case they got changed during the group. */ + + ims = original_ims; + DPRINTF(("ims reset to %02lx\n", ims)); + + /* For a non-repeating ket, just continue at this level. This also + happens for a repeating ket if no characters were matched in the group. + This is the forcible breaking of infinite loops as implemented in Perl + 5.005. If there is an options reset, it will get obeyed in the normal + course of events. */ + + if (*ecode == OP_KET || eptr == saved_eptr) + { + ecode += 1 + LINK_SIZE; + break; + } + + /* The repeating kets try the rest of the pattern or restart from the + preceding bracket, in the appropriate order. In the second case, we can use + tail recursion to avoid using another stack frame, unless we have an + unlimited repeat of a group that can match an empty string. */ + + flags = (*prev >= OP_SBRA)? match_cbegroup : 0; + + if (*ecode == OP_KETRMIN) + { + RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, 0, RM12); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (flags != 0) /* Could match an empty string */ + { + RMATCH(eptr, prev, offset_top, md, ims, eptrb, flags, RM50); + RRETURN(rrc); + } + ecode = prev; + goto TAIL_RECURSE; + } + else /* OP_KETRMAX */ + { + RMATCH(eptr, prev, offset_top, md, ims, eptrb, flags, RM13); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + ecode += 1 + LINK_SIZE; + flags = 0; + goto TAIL_RECURSE; + } + /* Control never gets here */ + + /* Start of subject unless notbol, or after internal newline if multiline */ + + case OP_CIRC: + if (md->notbol && eptr == md->start_subject) RRETURN(MATCH_NOMATCH); + if ((ims & PCRE_MULTILINE) != 0) + { + if (eptr != md->start_subject && + (eptr >= md->end_subject || !WAS_NEWLINE(eptr))) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + } + /* ... else fall through */ + + /* Start of subject assertion */ + + case OP_SOD: + if (eptr != md->start_subject) RRETURN(MATCH_NOMATCH); + ecode++; + break; + + /* Start of match assertion */ + + case OP_SOM: + if (eptr != md->start_subject + md->start_offset) RRETURN(MATCH_NOMATCH); + ecode++; + break; + + /* Reset the start of match point */ + + case OP_SET_SOM: + mstart = eptr; + ecode++; + break; + + /* Assert before internal newline if multiline, or before a terminating + newline unless endonly is set, else end of subject unless noteol is set. */ + + case OP_DOLL: + if ((ims & PCRE_MULTILINE) != 0) + { + if (eptr < md->end_subject) + { if (!IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH); } + else + { if (md->noteol) RRETURN(MATCH_NOMATCH); } + ecode++; + break; + } + else + { + if (md->noteol) RRETURN(MATCH_NOMATCH); + if (!md->endonly) + { + if (eptr != md->end_subject && + (!IS_NEWLINE(eptr) || eptr != md->end_subject - md->nllen)) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + } + } + /* ... else fall through for endonly */ + + /* End of subject assertion (\z) */ + + case OP_EOD: + if (eptr < md->end_subject) RRETURN(MATCH_NOMATCH); + ecode++; + break; + + /* End of subject or ending \n assertion (\Z) */ + + case OP_EODN: + if (eptr != md->end_subject && + (!IS_NEWLINE(eptr) || eptr != md->end_subject - md->nllen)) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + /* Word boundary assertions */ + + case OP_NOT_WORD_BOUNDARY: + case OP_WORD_BOUNDARY: + { + + /* Find out if the previous and current characters are "word" characters. + It takes a bit more work in UTF-8 mode. Characters > 255 are assumed to + be "non-word" characters. */ + +#ifdef SUPPORT_UTF8 + if (utf8) + { + if (eptr == md->start_subject) prev_is_word = FALSE; else + { + const uschar *lastptr = eptr - 1; + while((*lastptr & 0xc0) == 0x80) lastptr--; /* PaN: OK */ + GETCHAR(c, lastptr); + prev_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0; + } + if (eptr >= md->end_subject) cur_is_word = FALSE; else + { + GETCHAR(c, eptr); + cur_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0; + } + } + else +#endif + + /* More streamlined when not in UTF-8 mode */ + + { + prev_is_word = (eptr != md->start_subject) && + ((md->ctypes[eptr[-1]] & ctype_word) != 0); + cur_is_word = (eptr < md->end_subject) && + ((md->ctypes[*eptr] & ctype_word) != 0); + } + + /* Now see if the situation is what we want */ + + if ((*ecode++ == OP_WORD_BOUNDARY)? + cur_is_word == prev_is_word : cur_is_word != prev_is_word) + RRETURN(MATCH_NOMATCH); + } + break; + + /* Match a single character type; inline for speed */ + + case OP_ANY: + if ((ims & PCRE_DOTALL) == 0) + { + if (IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH); + } + if (eptr++ >= md->end_subject) RRETURN(MATCH_NOMATCH); + if (utf8) + while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; /* PaN: OK */ + ecode++; + break; + + /* Match a single byte, even in UTF-8 mode. This opcode really does match + any byte, even newline, independent of the setting of PCRE_DOTALL. */ + + case OP_ANYBYTE: + if (eptr++ >= md->end_subject) RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_NOT_DIGIT: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + if ( +#ifdef SUPPORT_UTF8 + c < 256 && +#endif + (md->ctypes[c] & ctype_digit) != 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_DIGIT: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + if ( +#ifdef SUPPORT_UTF8 + c >= 256 || +#endif + (md->ctypes[c] & ctype_digit) == 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_NOT_WHITESPACE: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + if ( +#ifdef SUPPORT_UTF8 + c < 256 && +#endif + (md->ctypes[c] & ctype_space) != 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_WHITESPACE: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + if ( +#ifdef SUPPORT_UTF8 + c >= 256 || +#endif + (md->ctypes[c] & ctype_space) == 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_NOT_WORDCHAR: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + if ( +#ifdef SUPPORT_UTF8 + c < 256 && +#endif + (md->ctypes[c] & ctype_word) != 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_WORDCHAR: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + if ( +#ifdef SUPPORT_UTF8 + c >= 256 || +#endif + (md->ctypes[c] & ctype_word) == 0 + ) + RRETURN(MATCH_NOMATCH); + ecode++; + break; + + case OP_ANYNL: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + ecode++; + break; + + case OP_NOT_HSPACE: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + switch(c) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + RRETURN(MATCH_NOMATCH); + } + ecode++; + break; + + case OP_HSPACE: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + break; + } + ecode++; + break; + + case OP_NOT_VSPACE: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + switch(c) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + RRETURN(MATCH_NOMATCH); + } + ecode++; + break; + + case OP_VSPACE: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + break; + } + ecode++; + break; + +#ifdef SUPPORT_UCP + /* Check the next character by Unicode property. We will get here only + if the support is in the binary; otherwise a compile-time error occurs. */ + + case OP_PROP: + case OP_NOTPROP: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + { + int chartype, script; + int category = _erts_pcre_ucp_findprop(c, &chartype, &script); + + switch(ecode[1]) + { + case PT_ANY: + if (op == OP_NOTPROP) RRETURN(MATCH_NOMATCH); + break; + + case PT_LAMP: + if ((chartype == ucp_Lu || + chartype == ucp_Ll || + chartype == ucp_Lt) == (op == OP_NOTPROP)) + RRETURN(MATCH_NOMATCH); + break; + + case PT_GC: + if ((ecode[2] != category) == (op == OP_PROP)) + RRETURN(MATCH_NOMATCH); + break; + + case PT_PC: + if ((ecode[2] != chartype) == (op == OP_PROP)) + RRETURN(MATCH_NOMATCH); + break; + + case PT_SC: + if ((ecode[2] != script) == (op == OP_PROP)) + RRETURN(MATCH_NOMATCH); + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + + ecode += 3; + } + break; + + /* Match an extended Unicode sequence. We will get here only if the support + is in the binary; otherwise a compile-time error occurs. */ + + case OP_EXTUNI: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + { + int chartype, script; + int category = _erts_pcre_ucp_findprop(c, &chartype, &script); + if (category == ucp_M) RRETURN(MATCH_NOMATCH); + while (eptr < md->end_subject) /* PaN: OK */ + { + int len = 1; + if (!utf8) c = *eptr; else + { + GETCHARLEN(c, eptr, len); + } + category = _erts_pcre_ucp_findprop(c, &chartype, &script); + if (category != ucp_M) break; + eptr += len; + COST_CHK(1); + } + } + ecode++; + break; +#endif + + + /* Match a back reference, possibly repeatedly. Look past the end of the + item to see if there is repeat information following. The code is similar + to that for character classes, but repeated for efficiency. Then obey + similar code to character type repeats - written out again for speed. + However, if the referenced string is the empty string, always treat + it as matched, any number of times (otherwise there could be infinite + loops). */ + + case OP_REF: + { + offset = GET2(ecode, 1) << 1; /* Doubled ref number */ + ecode += 3; /* Advance past item */ + + /* If the reference is unset, set the length to be longer than the amount + of subject left; this ensures that every attempt at a match fails. We + can't just fail here, because of the possibility of quantifiers with zero + minima. */ + + length = (offset >= offset_top || md->offset_vector[offset] < 0)? + md->end_subject - eptr + 1 : + md->offset_vector[offset+1] - md->offset_vector[offset]; + + /* Set up for repetition, or handle the non-repeated case */ + + switch (*ecode) + { + case OP_CRSTAR: + case OP_CRMINSTAR: + case OP_CRPLUS: + case OP_CRMINPLUS: + case OP_CRQUERY: + case OP_CRMINQUERY: + c = *ecode++ - OP_CRSTAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + break; + + case OP_CRRANGE: + case OP_CRMINRANGE: + minimize = (*ecode == OP_CRMINRANGE); + min = GET2(ecode, 1); + max = GET2(ecode, 3); + if (max == 0) max = INT_MAX; + ecode += 5; + break; + + default: /* No repeat follows */ + if (!match_ref(offset, eptr, length, md, ims)) RRETURN(MATCH_NOMATCH); + eptr += length; + continue; /* With the main loop */ + } + + /* If the length of the reference is zero, just continue with the + main loop. */ + + if (length == 0) continue; + + /* First, ensure the minimum number of matches are present. We get back + the length of the reference string explicitly rather than passing the + address of eptr, so that eptr can be a register variable. */ + + COST(min); + for (i = 1; i <= min; i++) + { + if (!match_ref(offset, eptr, length, md, ims)) RRETURN(MATCH_NOMATCH); + eptr += length; + } + + /* If min = max, continue at the same level without recursion. + They are not both allowed to be zero. */ + + if (min == max) continue; + + /* If minimizing, keep trying and advancing the pointer */ + + if (minimize) + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM14); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || !match_ref(offset, eptr, length, md, ims)) + RRETURN(MATCH_NOMATCH); + eptr += length; + } + /* Control never gets here */ + } + + /* If maximizing, find the longest string and work backwards */ + + else + { + pp = eptr; + for (i = min; i < max; i++) /* PaN: OK */ + { + if (!match_ref(offset, eptr, length, md, ims)) break; + eptr += length; + COST_CHK(1); + } + while (eptr >= pp) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM15); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + eptr -= length; + } + RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + + + + /* Match a bit-mapped character class, possibly repeatedly. This op code is + used when all the characters in the class have values in the range 0-255, + and either the matching is caseful, or the characters are in the range + 0-127 when UTF-8 processing is enabled. The only difference between + OP_CLASS and OP_NCLASS occurs when a data character outside the range is + encountered. + + First, look past the end of the item to see if there is repeat information + following. Then obey similar code to character type repeats - written out + again for speed. */ + + case OP_NCLASS: + case OP_CLASS: + { + data = ecode + 1; /* Save for matching */ + ecode += 33; /* Advance past the item */ +#ifdef ERLANG_INTEGRATION + EDEBUGF(("OP_(N)CLASS (%d)...",*ecode)); +#endif + + switch (*ecode) + { + case OP_CRSTAR: + case OP_CRMINSTAR: + case OP_CRPLUS: + case OP_CRMINPLUS: + case OP_CRQUERY: + case OP_CRMINQUERY: + c = *ecode++ - OP_CRSTAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + break; + + case OP_CRRANGE: + case OP_CRMINRANGE: + minimize = (*ecode == OP_CRMINRANGE); + min = GET2(ecode, 1); + max = GET2(ecode, 3); + if (max == 0) max = INT_MAX; + ecode += 5; + break; + + default: /* No repeat follows */ + min = max = 1; + break; + } + + /* First, ensure the minimum number of matches are present. */ + +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + if (c > 255) + { + if (op == OP_CLASS) RRETURN(MATCH_NOMATCH); + } + else + { + if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); + } + } + } + else +#endif + /* Not UTF-8 mode */ + { + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + c = *eptr++; + if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); + } + } + + /* If max == min we can continue with the main loop without the + need to recurse. */ + + if (min == max) continue; + + /* If minimizing, keep testing the rest of the expression and advancing + the pointer while it matches the class. */ + + if (minimize) + { +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM16); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + if (c > 255) + { + if (op == OP_CLASS) RRETURN(MATCH_NOMATCH); + } + else + { + if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); + } + } + } + else +#endif + /* Not UTF-8 mode */ + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM17); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + c = *eptr++; + if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + } + + /* If maximizing, find the longest possible run, then work backwards. */ + + else + { + pp = eptr; + +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + for (i = min; i < max; i++) /* PaN: OK */ + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (c > 255) + { + if (op == OP_CLASS) break; + } + else + { + if ((data[c/8] & (1 << (c&7))) == 0) break; + } + eptr += len; + COST_CHK(1); + } + for (;;) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM18); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + BACKCHAR(eptr); + } + } + else +#endif + /* Not UTF-8 mode */ + { + for (i = min; i < max; i++) /* PaN: OK */ + { + if (eptr >= md->end_subject) break; + c = *eptr; + if ((data[c/8] & (1 << (c&7))) == 0) break; + eptr++; + COST_CHK(1); + } + while (eptr >= pp) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM19); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + eptr--; + } + } + + RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + + + /* Match an extended character class. This opcode is encountered only + in UTF-8 mode, because that's the only time it is compiled. */ + +#ifdef SUPPORT_UTF8 + case OP_XCLASS: + { + data = ecode + 1 + LINK_SIZE; /* Save for matching */ + ecode += GET(ecode, 1); /* Advance past the item */ + + switch (*ecode) + { + case OP_CRSTAR: + case OP_CRMINSTAR: + case OP_CRPLUS: + case OP_CRMINPLUS: + case OP_CRQUERY: + case OP_CRMINQUERY: + c = *ecode++ - OP_CRSTAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + break; + + case OP_CRRANGE: + case OP_CRMINRANGE: + minimize = (*ecode == OP_CRMINRANGE); + min = GET2(ecode, 1); + max = GET2(ecode, 3); + if (max == 0) max = INT_MAX; + ecode += 5; + break; + + default: /* No repeat follows */ + min = max = 1; + break; + } + + /* First, ensure the minimum number of matches are present. */ + + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + if (!_erts_pcre_xclass(c, data)) RRETURN(MATCH_NOMATCH); + } + + /* If max == min we can continue with the main loop without the + need to recurse. */ + + if (min == max) continue; + + /* If minimizing, keep testing the rest of the expression and advancing + the pointer while it matches the class. */ + + if (minimize) + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM20); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + if (!_erts_pcre_xclass(c, data)) RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + } + + /* If maximizing, find the longest possible run, then work backwards. */ + + else + { + pp = eptr; + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (!_erts_pcre_xclass(c, data)) break; + eptr += len; + COST_CHK(1); + } + for(;;) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM21); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + if (utf8) BACKCHAR(eptr); + } + RRETURN(MATCH_NOMATCH); + } + + /* Control never gets here */ + } +#endif /* End of XCLASS */ + + /* Match a single character, casefully */ + + case OP_CHAR: +#ifdef SUPPORT_UTF8 + if (utf8) + { + length = 1; + ecode++; + GETCHARLEN(fc, ecode, length); + if (length > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); + while (length-- > 0) if (*ecode++ != *eptr++) RRETURN(MATCH_NOMATCH); /* PaN: OK */ + } + else +#endif + + /* Non-UTF-8 mode */ + { + if (md->end_subject - eptr < 1) RRETURN(MATCH_NOMATCH); + EDEBUGF(("code to match:%d, code is:%d",ecode[1],*eptr)); + if (ecode[1] != *eptr++) RRETURN(MATCH_NOMATCH); + ecode += 2; + } + break; + + /* Match a single character, caselessly */ + + case OP_CHARNC: +#ifdef SUPPORT_UTF8 + if (utf8) + { + length = 1; + ecode++; + GETCHARLEN(fc, ecode, length); + + if (length > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); + + /* If the pattern character's value is < 128, we have only one byte, and + can use the fast lookup table. */ + + if (fc < 128) + { + if (md->lcc[*ecode++] != md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH); + } + + /* Otherwise we must pick up the subject character */ + + else + { + unsigned int dc; + GETCHARINC(dc, eptr); + ecode += length; + + /* If we have Unicode property support, we can use it to test the other + case of the character, if there is one. */ + + if (fc != dc) + { +#ifdef SUPPORT_UCP + if (dc != _erts_pcre_ucp_othercase(fc)) +#endif + RRETURN(MATCH_NOMATCH); + } + } + } + else +#endif /* SUPPORT_UTF8 */ + + /* Non-UTF-8 mode */ + { + if (md->end_subject - eptr < 1) RRETURN(MATCH_NOMATCH); + if (md->lcc[ecode[1]] != md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH); + ecode += 2; + } + break; + + /* Match a single character repeatedly. */ + + case OP_EXACT: + min = max = GET2(ecode, 1); + ecode += 3; + goto REPEATCHAR; + + case OP_POSUPTO: + possessive = TRUE; + /* Fall through */ + + case OP_UPTO: + case OP_MINUPTO: + min = 0; + max = GET2(ecode, 1); + minimize = *ecode == OP_MINUPTO; + ecode += 3; + goto REPEATCHAR; + + case OP_POSSTAR: + possessive = TRUE; + min = 0; + max = INT_MAX; + ecode++; + goto REPEATCHAR; + + case OP_POSPLUS: + possessive = TRUE; + min = 1; + max = INT_MAX; + ecode++; + goto REPEATCHAR; + + case OP_POSQUERY: + possessive = TRUE; + min = 0; + max = 1; + ecode++; + goto REPEATCHAR; + + case OP_STAR: + case OP_MINSTAR: + case OP_PLUS: + case OP_MINPLUS: + case OP_QUERY: + case OP_MINQUERY: + c = *ecode++ - OP_STAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + + /* Common code for all repeated single-character matches. We can give + up quickly if there are fewer than the minimum number of characters left in + the subject. */ + + REPEATCHAR: +#ifdef SUPPORT_UTF8 + if (utf8) + { + length = 1; + charptr = ecode; + GETCHARLEN(fc, ecode, length); + if (min * length > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); + ecode += length; + + /* Handle multibyte character matching specially here. There is + support for caseless matching if UCP support is present. */ + + if (length > 1) + { +#ifdef SUPPORT_UCP + unsigned int othercase; + if ((ims & PCRE_CASELESS) != 0 && + (othercase = _erts_pcre_ucp_othercase(fc)) != NOTACHAR) + oclength = _erts_pcre_ord2utf8(othercase, occhars); + else oclength = 0; +#endif /* SUPPORT_UCP */ + COST(min); + for (i = 1; i <= min; i++) /* PaN: Cost min (?) */ + { + if (memcmp(eptr, charptr, length) == 0) eptr += length; +#ifdef SUPPORT_UCP + /* Need braces because of following else */ + else if (oclength == 0) { RRETURN(MATCH_NOMATCH); } + else + { + if (memcmp(eptr, occhars, oclength) != 0) RRETURN(MATCH_NOMATCH); + eptr += oclength; + } +#else /* without SUPPORT_UCP */ + else { RRETURN(MATCH_NOMATCH); } +#endif /* SUPPORT_UCP */ + } + + if (min == max) continue; + + if (minimize) + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM22); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + if (memcmp(eptr, charptr, length) == 0) eptr += length; +#ifdef SUPPORT_UCP + /* Need braces because of following else */ + else if (oclength == 0) { RRETURN(MATCH_NOMATCH); } + else + { + if (memcmp(eptr, occhars, oclength) != 0) RRETURN(MATCH_NOMATCH); + eptr += oclength; + } +#else /* without SUPPORT_UCP */ + else { RRETURN (MATCH_NOMATCH); } +#endif /* SUPPORT_UCP */ + } + /* Control never gets here */ + } + + else /* Maximize */ + { + pp = eptr; + for (i = min; i < max; i++) + { + if (eptr > md->end_subject - length) break; + if (memcmp(eptr, charptr, length) == 0) eptr += length; +#ifdef SUPPORT_UCP + else if (oclength == 0) break; + else + { + if (memcmp(eptr, occhars, oclength) != 0) break; + eptr += oclength; + } +#else /* without SUPPORT_UCP */ + else break; +#endif /* SUPPORT_UCP */ + COST_CHK(1); + } + + if (possessive) continue; + for(;;) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM23); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr == pp) RRETURN(MATCH_NOMATCH); +#ifdef SUPPORT_UCP + eptr--; + BACKCHAR(eptr); +#else /* without SUPPORT_UCP */ + eptr -= length; +#endif /* SUPPORT_UCP */ + } + } + /* Control never gets here */ + } + + /* If the length of a UTF-8 character is 1, we fall through here, and + obey the code as for non-UTF-8 characters below, though in this case the + value of fc will always be < 128. */ + } + else +#endif /* SUPPORT_UTF8 */ + + /* When not in UTF-8 mode, load a single-byte character. */ + { + if (min > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); + fc = *ecode++; + } + + /* The value of fc at this point is always less than 256, though we may or + may not be in UTF-8 mode. The code is duplicated for the caseless and + caseful cases, for speed, since matching characters is likely to be quite + common. First, ensure the minimum number of matches are present. If min = + max, continue at the same level without recursing. Otherwise, if + minimizing, keep trying the rest of the expression and advancing one + matching character if failing, up to the maximum. Alternatively, if + maximizing, find the maximum number of characters and work backwards. */ + + DPRINTF(("matching %c{%d,%d} against subject %.*s\n", fc, min, max, + max, eptr)); + + if ((ims & PCRE_CASELESS) != 0) + { + fc = md->lcc[fc]; + COST(min); + for (i = 1; i <= min; i++) + if (fc != md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH); + if (min == max) continue; + if (minimize) + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM24); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject || + fc != md->lcc[*eptr++]) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + } + else /* Maximize */ + { + pp = eptr; + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || fc != md->lcc[*eptr]) break; + eptr++; + COST_CHK(1); + } + if (possessive) continue; + while (eptr >= pp) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM25); + eptr--; + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + } + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + } + + /* Caseful comparisons (includes all multi-byte characters) */ + + else + { + COST(min); + for (i = 1; i <= min; i++) if (fc != *eptr++) RRETURN(MATCH_NOMATCH); + if (min == max) continue; + if (minimize) + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM26); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject || fc != *eptr++) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + } + else /* Maximize */ + { + pp = eptr; + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || fc != *eptr) break; + eptr++; + COST_CHK(1); + } + if (possessive) continue; + while (eptr >= pp) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM27); + eptr--; + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + } + RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + + /* Match a negated single one-byte character. The character we are + checking can be multibyte. */ + + case OP_NOT: + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + ecode++; + GETCHARINCTEST(c, eptr); + if ((ims & PCRE_CASELESS) != 0) + { +#ifdef SUPPORT_UTF8 + if (c < 256) +#endif + c = md->lcc[c]; + if (md->lcc[*ecode++] == c) RRETURN(MATCH_NOMATCH); + } + else + { + if (*ecode++ == c) RRETURN(MATCH_NOMATCH); + } + break; + + /* Match a negated single one-byte character repeatedly. This is almost a + repeat of the code for a repeated single character, but I haven't found a + nice way of commoning these up that doesn't require a test of the + positive/negative option for each character match. Maybe that wouldn't add + very much to the time taken, but character matching *is* what this is all + about... */ + + case OP_NOTEXACT: + min = max = GET2(ecode, 1); + ecode += 3; + goto REPEATNOTCHAR; + + case OP_NOTUPTO: + case OP_NOTMINUPTO: + min = 0; + max = GET2(ecode, 1); + minimize = *ecode == OP_NOTMINUPTO; + ecode += 3; + goto REPEATNOTCHAR; + + case OP_NOTPOSSTAR: + possessive = TRUE; + min = 0; + max = INT_MAX; + ecode++; + goto REPEATNOTCHAR; + + case OP_NOTPOSPLUS: + possessive = TRUE; + min = 1; + max = INT_MAX; + ecode++; + goto REPEATNOTCHAR; + + case OP_NOTPOSQUERY: + possessive = TRUE; + min = 0; + max = 1; + ecode++; + goto REPEATNOTCHAR; + + case OP_NOTPOSUPTO: + possessive = TRUE; + min = 0; + max = GET2(ecode, 1); + ecode += 3; + goto REPEATNOTCHAR; + + case OP_NOTSTAR: + case OP_NOTMINSTAR: + case OP_NOTPLUS: + case OP_NOTMINPLUS: + case OP_NOTQUERY: + case OP_NOTMINQUERY: + c = *ecode++ - OP_NOTSTAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + + /* Common code for all repeated single-byte matches. We can give up quickly + if there are fewer than the minimum number of bytes left in the + subject. */ + + REPEATNOTCHAR: + if (min > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); + fc = *ecode++; + + /* The code is duplicated for the caseless and caseful cases, for speed, + since matching characters is likely to be quite common. First, ensure the + minimum number of matches are present. If min = max, continue at the same + level without recursing. Otherwise, if minimizing, keep trying the rest of + the expression and advancing one matching character if failing, up to the + maximum. Alternatively, if maximizing, find the maximum number of + characters and work backwards. */ + + DPRINTF(("negative matching %c{%d,%d} against subject %.*s\n", fc, min, max, + max, eptr)); + + if ((ims & PCRE_CASELESS) != 0) + { + fc = md->lcc[fc]; + +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + register unsigned int d; + COST(min); + for (i = 1; i <= min; i++) + { + GETCHARINC(d, eptr); + if (d < 256) d = md->lcc[d]; + if (fc == d) RRETURN(MATCH_NOMATCH); + } + } + else +#endif + + /* Not UTF-8 mode */ + { + COST(min); + for (i = 1; i <= min; i++) + if (fc == md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH); + } + + if (min == max) continue; + + if (minimize) + { +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + register unsigned int d; + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM28); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + GETCHARINC(d, eptr); + if (d < 256) d = md->lcc[d]; + if (fi >= max || eptr >= md->end_subject || fc == d) + RRETURN(MATCH_NOMATCH); + } + } + else +#endif + /* Not UTF-8 mode */ + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM29); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject || fc == md->lcc[*eptr++]) + RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + } + + /* Maximize case */ + + else + { + pp = eptr; + +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + register unsigned int d; + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(d, eptr, len); + if (d < 256) d = md->lcc[d]; + if (fc == d) break; + eptr += len; + COST_CHK(1); + } + if (possessive) continue; + for(;;) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM30); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + BACKCHAR(eptr); + } + } + else +#endif + /* Not UTF-8 mode */ + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || fc == md->lcc[*eptr]) break; + eptr++; + COST_CHK(1); + } + if (possessive) continue; + while (eptr >= pp) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM31); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + eptr--; + } + } + + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + } + + /* Caseful comparisons */ + + else + { +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + register unsigned int d; + COST(min); + for (i = 1; i <= min; i++) + { + GETCHARINC(d, eptr); + if (fc == d) RRETURN(MATCH_NOMATCH); + } + } + else +#endif + /* Not UTF-8 mode */ + { + COST(min); + for (i = 1; i <= min; i++) + if (fc == *eptr++) RRETURN(MATCH_NOMATCH); + } + + if (min == max) continue; + + if (minimize) + { +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + register unsigned int d; + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM32); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + GETCHARINC(d, eptr); + if (fi >= max || eptr >= md->end_subject || fc == d) + RRETURN(MATCH_NOMATCH); + } + } + else +#endif + /* Not UTF-8 mode */ + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM33); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject || fc == *eptr++) + RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + } + + /* Maximize case */ + + else + { + pp = eptr; + +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + register unsigned int d; + COST(min); + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(d, eptr, len); + if (fc == d) break; + eptr += len; + } + if (possessive) continue; + for(;;) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM34); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + BACKCHAR(eptr); + } + } + else +#endif + /* Not UTF-8 mode */ + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || fc == *eptr) break; + eptr++; + COST_CHK(1); + } + if (possessive) continue; + while (eptr >= pp) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM35); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + eptr--; + } + } + + RRETURN(MATCH_NOMATCH); + } + } + /* Control never gets here */ + + /* Match a single character type repeatedly; several different opcodes + share code. This is very similar to the code for single characters, but we + repeat it in the interests of efficiency. */ + + case OP_TYPEEXACT: + min = max = GET2(ecode, 1); + minimize = TRUE; + ecode += 3; + goto REPEATTYPE; + + case OP_TYPEUPTO: + case OP_TYPEMINUPTO: + min = 0; + max = GET2(ecode, 1); + minimize = *ecode == OP_TYPEMINUPTO; + ecode += 3; + goto REPEATTYPE; + + case OP_TYPEPOSSTAR: + possessive = TRUE; + min = 0; + max = INT_MAX; + ecode++; + goto REPEATTYPE; + + case OP_TYPEPOSPLUS: + possessive = TRUE; + min = 1; + max = INT_MAX; + ecode++; + goto REPEATTYPE; + + case OP_TYPEPOSQUERY: + possessive = TRUE; + min = 0; + max = 1; + ecode++; + goto REPEATTYPE; + + case OP_TYPEPOSUPTO: + possessive = TRUE; + min = 0; + max = GET2(ecode, 1); + ecode += 3; + goto REPEATTYPE; + + case OP_TYPESTAR: + case OP_TYPEMINSTAR: + case OP_TYPEPLUS: + case OP_TYPEMINPLUS: + case OP_TYPEQUERY: + case OP_TYPEMINQUERY: + c = *ecode++ - OP_TYPESTAR; + minimize = (c & 1) != 0; + min = rep_min[c]; /* Pick up values from tables; */ + max = rep_max[c]; /* zero for max => infinity */ + if (max == 0) max = INT_MAX; + + /* Common code for all repeated single character type matches. Note that + in UTF-8 mode, '.' matches a character of any length, but for the other + character types, the valid characters are all one-byte long. */ + + REPEATTYPE: + ctype = *ecode++; /* Code for the character type */ + +#ifdef SUPPORT_UCP + if (ctype == OP_PROP || ctype == OP_NOTPROP) + { + prop_fail_result = ctype == OP_NOTPROP; + prop_type = *ecode++; + prop_value = *ecode++; + } + else prop_type = -1; +#endif + + /* First, ensure the minimum number of matches are present. Use inline + code for maximizing the speed, and do the type test once at the start + (i.e. keep it out of the loop). Also we can test that there are at least + the minimum number of bytes before we start. This isn't as effective in + UTF-8 mode, but it does no harm. Separate the UTF-8 code completely as that + is tidier. Also separate the UCP code, which can be the same for both UTF-8 + and single-bytes. */ + + if (min > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); + if (min > 0) + { +#ifdef SUPPORT_UCP + if (prop_type >= 0) + { + COST(min); + switch(prop_type) + { + case PT_ANY: + if (prop_fail_result) RRETURN(MATCH_NOMATCH); + for (i = 1; i <= min; i++) /* PaN: OK (cost above) */ + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + } + break; + + case PT_LAMP: + for (i = 1; i <= min; i++) /* PaN: OK (cost above) */ + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_chartype == ucp_Lu || + prop_chartype == ucp_Ll || + prop_chartype == ucp_Lt) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_GC: + for (i = 1; i <= min; i++) /* PaN: OK (cost above) */ + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_category == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_PC: + for (i = 1; i <= min; i++) /* PaN: OK (cost above) */ + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_chartype == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + case PT_SC: + for (i = 1; i <= min; i++) /* PaN: OK (cost above) */ + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_script == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + + /* Match extended Unicode sequences. We will get here only if the + support is in the binary; otherwise a compile-time error occurs. */ + + else if (ctype == OP_EXTUNI) + { + COST(min); + for (i = 1; i <= min; i++) + { + GETCHARINCTEST(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if (prop_category == ucp_M) RRETURN(MATCH_NOMATCH); + while (eptr < md->end_subject) + { + int len = 1; + if (!utf8) c = *eptr; else + { + GETCHARLEN(c, eptr, len); + } + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if (prop_category != ucp_M) break; + eptr += len; + COST_CHK(1); + } + } + } + + else +#endif /* SUPPORT_UCP */ + +/* Handle all other cases when the coding is UTF-8 */ + +#ifdef SUPPORT_UTF8 + if (utf8) switch(ctype) + { + case OP_ANY: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject || + ((ims & PCRE_DOTALL) == 0 && IS_NEWLINE(eptr))) + RRETURN(MATCH_NOMATCH); + eptr++; + while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; + } + break; + + case OP_ANYBYTE: + eptr += min; + break; + + case OP_ANYNL: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + } + break; + + case OP_NOT_HSPACE: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + switch(c) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + RRETURN(MATCH_NOMATCH); + } + } + break; + + case OP_HSPACE: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + break; + } + } + break; + + case OP_NOT_VSPACE: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + switch(c) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + RRETURN(MATCH_NOMATCH); + } + } + break; + + case OP_VSPACE: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + break; + } + } + break; + + case OP_NOT_DIGIT: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + if (c < 128 && (md->ctypes[c] & ctype_digit) != 0) + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_DIGIT: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject || + *eptr >= 128 || (md->ctypes[*eptr++] & ctype_digit) == 0) + RRETURN(MATCH_NOMATCH); + /* No need to skip more bytes - we know it's a 1-byte character */ + } + break; + + case OP_NOT_WHITESPACE: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject || + (*eptr < 128 && (md->ctypes[*eptr] & ctype_space) != 0)) + RRETURN(MATCH_NOMATCH); + while (++eptr < md->end_subject && (*eptr & 0xc0) == 0x80); /* PaN: Check */ + } + break; + + case OP_WHITESPACE: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject || + *eptr >= 128 || (md->ctypes[*eptr++] & ctype_space) == 0) + RRETURN(MATCH_NOMATCH); + /* No need to skip more bytes - we know it's a 1-byte character */ + } + break; + + case OP_NOT_WORDCHAR: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject || + (*eptr < 128 && (md->ctypes[*eptr] & ctype_word) != 0)) + RRETURN(MATCH_NOMATCH); + while (++eptr < md->end_subject && (*eptr & 0xc0) == 0x80); /* PaN: Check */ + } + break; + + case OP_WORDCHAR: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject || + *eptr >= 128 || (md->ctypes[*eptr++] & ctype_word) == 0) + RRETURN(MATCH_NOMATCH); + /* No need to skip more bytes - we know it's a 1-byte character */ + } + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } /* End switch(ctype) */ + + else +#endif /* SUPPORT_UTF8 */ + + /* Code for the non-UTF-8 case for minimum matching of operators other + than OP_PROP and OP_NOTPROP. We can assume that there are the minimum + number of bytes present, as this was tested above. */ + + switch(ctype) + { + case OP_ANY: + if ((ims & PCRE_DOTALL) == 0) + { + COST(min); + for (i = 1; i <= min; i++) + { + if (IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH); + eptr++; + } + } + else eptr += min; + break; + + case OP_ANYBYTE: + eptr += min; + break; + + /* Because of the CRLF case, we can't assume the minimum number of + bytes are present in this case. */ + + case OP_ANYNL: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + switch(*eptr++) + { + default: RRETURN(MATCH_NOMATCH); + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + } + break; + + case OP_NOT_HSPACE: + COST(min); + for (i = 1; i <= min; i++) /* PaN: Check */ + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + switch(*eptr++) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + RRETURN(MATCH_NOMATCH); + } + } + break; + + case OP_HSPACE: + COST(min); + for (i = 1; i <= min; i++) /* PaN: Check */ + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + switch(*eptr++) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + break; + } + } + break; + + case OP_NOT_VSPACE: + COST(min); + for (i = 1; i <= min; i++) /* PaN: Check */ + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + switch(*eptr++) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + RRETURN(MATCH_NOMATCH); + } + } + break; + + case OP_VSPACE: + COST(min); + for (i = 1; i <= min; i++) + { + if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + switch(*eptr++) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + break; + } + } + break; + + case OP_NOT_DIGIT: + COST(min); + for (i = 1; i <= min; i++) + if ((md->ctypes[*eptr++] & ctype_digit) != 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_DIGIT: + COST(min); + for (i = 1; i <= min; i++) + if ((md->ctypes[*eptr++] & ctype_digit) == 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WHITESPACE: + COST(min); + for (i = 1; i <= min; i++) + if ((md->ctypes[*eptr++] & ctype_space) != 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_WHITESPACE: + COST(min); + for (i = 1; i <= min; i++) + if ((md->ctypes[*eptr++] & ctype_space) == 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WORDCHAR: + COST(min); + for (i = 1; i <= min; i++) + if ((md->ctypes[*eptr++] & ctype_word) != 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_WORDCHAR: + COST(min); + for (i = 1; i <= min; i++) + if ((md->ctypes[*eptr++] & ctype_word) == 0) + RRETURN(MATCH_NOMATCH); + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + + /* If min = max, continue at the same level without recursing */ + + if (min == max) continue; + + /* If minimizing, we have to test the rest of the pattern before each + subsequent match. Again, separate the UTF-8 case for speed, and also + separate the UCP cases. */ + + if (minimize) + { +#ifdef SUPPORT_UCP + if (prop_type >= 0) + { + switch(prop_type) + { + case PT_ANY: + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM36); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + if (prop_fail_result) RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_LAMP: + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM37); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_chartype == ucp_Lu || + prop_chartype == ucp_Ll || + prop_chartype == ucp_Lt) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_GC: + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM38); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_category == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_PC: + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM39); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_chartype == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + case PT_SC: + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM40); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINC(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_script == prop_value) == prop_fail_result) + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + + /* Match extended Unicode sequences. We will get here only if the + support is in the binary; otherwise a compile-time error occurs. */ + + else if (ctype == OP_EXTUNI) + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM41); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); + GETCHARINCTEST(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if (prop_category == ucp_M) RRETURN(MATCH_NOMATCH); + while (eptr < md->end_subject) /* PaN: Check */ + { + int len = 1; + if (!utf8) c = *eptr; else + { + GETCHARLEN(c, eptr, len); + } + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if (prop_category != ucp_M) break; + eptr += len; + } + } + } + + else +#endif /* SUPPORT_UCP */ + +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + if (utf8) + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM42); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject || + (ctype == OP_ANY && (ims & PCRE_DOTALL) == 0 && + IS_NEWLINE(eptr))) + RRETURN(MATCH_NOMATCH); + + GETCHARINC(c, eptr); + switch(ctype) + { + case OP_ANY: /* This is the DOTALL case */ + break; + + case OP_ANYBYTE: + break; + + case OP_ANYNL: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + break; + + case OP_NOT_HSPACE: + switch(c) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_HSPACE: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + break; + } + break; + + case OP_NOT_VSPACE: + switch(c) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_VSPACE: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + break; + } + break; + + case OP_NOT_DIGIT: + if (c < 256 && (md->ctypes[c] & ctype_digit) != 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_DIGIT: + if (c >= 256 || (md->ctypes[c] & ctype_digit) == 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WHITESPACE: + if (c < 256 && (md->ctypes[c] & ctype_space) != 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_WHITESPACE: + if (c >= 256 || (md->ctypes[c] & ctype_space) == 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WORDCHAR: + if (c < 256 && (md->ctypes[c] & ctype_word) != 0) + RRETURN(MATCH_NOMATCH); + break; + + case OP_WORDCHAR: + if (c >= 256 || (md->ctypes[c] & ctype_word) == 0) + RRETURN(MATCH_NOMATCH); + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + } + else +#endif + /* Not UTF-8 mode */ + { + for (fi = min;; fi++) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM43); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (fi >= max || eptr >= md->end_subject || + ((ims & PCRE_DOTALL) == 0 && IS_NEWLINE(eptr))) + RRETURN(MATCH_NOMATCH); + + c = *eptr++; + switch(ctype) + { + case OP_ANY: /* This is the DOTALL case */ + break; + + case OP_ANYBYTE: + break; + + case OP_ANYNL: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x000d: + if (eptr < md->end_subject && *eptr == 0x0a) eptr++; + break; + + case 0x000a: + break; + + case 0x000b: + case 0x000c: + case 0x0085: + if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH); + break; + } + break; + + case OP_NOT_HSPACE: + switch(c) + { + default: break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_HSPACE: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + break; + } + break; + + case OP_NOT_VSPACE: + switch(c) + { + default: break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + RRETURN(MATCH_NOMATCH); + } + break; + + case OP_VSPACE: + switch(c) + { + default: RRETURN(MATCH_NOMATCH); + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + break; + } + break; + + case OP_NOT_DIGIT: + if ((md->ctypes[c] & ctype_digit) != 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_DIGIT: + if ((md->ctypes[c] & ctype_digit) == 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WHITESPACE: + if ((md->ctypes[c] & ctype_space) != 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_WHITESPACE: + if ((md->ctypes[c] & ctype_space) == 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_NOT_WORDCHAR: + if ((md->ctypes[c] & ctype_word) != 0) RRETURN(MATCH_NOMATCH); + break; + + case OP_WORDCHAR: + if ((md->ctypes[c] & ctype_word) == 0) RRETURN(MATCH_NOMATCH); + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + } + } + /* Control never gets here */ + } + + /* If maximizing, it is worth using inline code for speed, doing the type + test once at the start (i.e. keep it out of the loop). Again, keep the + UTF-8 and UCP stuff separate. */ + + else + { + pp = eptr; /* Remember where we started */ + +#ifdef SUPPORT_UCP + if (prop_type >= 0) + { + switch(prop_type) + { + case PT_ANY: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (prop_fail_result) break; + eptr+= len; + COST_CHK(1); + } + break; + + case PT_LAMP: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_chartype == ucp_Lu || + prop_chartype == ucp_Ll || + prop_chartype == ucp_Lt) == prop_fail_result) + break; + eptr+= len; + COST_CHK(1); + } + break; + + case PT_GC: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_category == prop_value) == prop_fail_result) + break; + eptr+= len; + COST_CHK(1); + } + break; + + case PT_PC: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_chartype == prop_value) == prop_fail_result) + break; + eptr+= len; + COST_CHK(1); + } + break; + + case PT_SC: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if ((prop_script == prop_value) == prop_fail_result) + break; + eptr+= len; + COST_CHK(1); + } + break; + } + + /* eptr is now past the end of the maximum run */ + + if (possessive) continue; + for(;;) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM44); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + if (utf8) BACKCHAR(eptr); + } + } + + /* Match extended Unicode sequences. We will get here only if the + support is in the binary; otherwise a compile-time error occurs. */ + + else if (ctype == OP_EXTUNI) + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) break; + GETCHARINCTEST(c, eptr); + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if (prop_category == ucp_M) break; + while (eptr < md->end_subject) + { + int len = 1; + if (!utf8) c = *eptr; else + { + GETCHARLEN(c, eptr, len); + } + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if (prop_category != ucp_M) break; + eptr += len; + COST_CHK(1); + } + COST_CHK(1); + } + + /* eptr is now past the end of the maximum run */ + + if (possessive) continue; + for(;;) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM45); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + for (;;) /* Move back over one extended */ /* PaN: Check */ + { + int len = 1; + if (!utf8) c = *eptr; else + { + BACKCHAR(eptr); + GETCHARLEN(c, eptr, len); + } + prop_category = _erts_pcre_ucp_findprop(c, &prop_chartype, &prop_script); + if (prop_category != ucp_M) break; + eptr--; + } + } + } + + else +#endif /* SUPPORT_UCP */ + +#ifdef SUPPORT_UTF8 + /* UTF-8 mode */ + + if (utf8) + { + switch(ctype) + { + case OP_ANY: + if (max < INT_MAX) + { + if ((ims & PCRE_DOTALL) == 0) + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || IS_NEWLINE(eptr)) break; + eptr++; + while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; + COST_CHK(1); + } + } + else + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) break; + eptr++; + while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; /* PaN: Check */ + COST_CHK(1); + } + } + } + + /* Handle unlimited UTF-8 repeat */ + + else + { + if ((ims & PCRE_DOTALL) == 0) + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || IS_NEWLINE(eptr)) break; + eptr++; + while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; + COST_CHK(1); + } + } + else + { + eptr = md->end_subject; + } + } + break; + + /* The byte case is the same as non-UTF8 */ + + case OP_ANYBYTE: + c = max - min; + if (c > (unsigned int)(md->end_subject - eptr)) + c = md->end_subject - eptr; + eptr += c; + break; + + case OP_ANYNL: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (c == 0x000d) + { + if (++eptr >= md->end_subject) break; + if (*eptr == 0x000a) eptr++; + } + else + { + if (c != 0x000a && + (md->bsr_anycrlf || + (c != 0x000b && c != 0x000c && + c != 0x0085 && c != 0x2028 && c != 0x2029))) + break; + eptr += len; + } + COST_CHK(1); + } + break; + + case OP_NOT_HSPACE: + case OP_HSPACE: + for (i = min; i < max; i++) + { + BOOL gotspace; + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + switch(c) + { + default: gotspace = FALSE; break; + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + gotspace = TRUE; + break; + } + if (gotspace == (ctype == OP_NOT_HSPACE)) break; + eptr += len; + COST_CHK(1); + } + break; + + case OP_NOT_VSPACE: + case OP_VSPACE: + for (i = min; i < max; i++) + { + BOOL gotspace; + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + switch(c) + { + default: gotspace = FALSE; break; + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LINE SEPARATOR */ + case 0x2029: /* PARAGRAPH SEPARATOR */ + gotspace = TRUE; + break; + } + if (gotspace == (ctype == OP_NOT_VSPACE)) break; + eptr += len; + COST_CHK(1); + } + break; + + case OP_NOT_DIGIT: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (c < 256 && (md->ctypes[c] & ctype_digit) != 0) break; + eptr+= len; + COST_CHK(1); + } + break; + + case OP_DIGIT: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (c >= 256 ||(md->ctypes[c] & ctype_digit) == 0) break; + eptr+= len; + COST_CHK(1); + } + break; + + case OP_NOT_WHITESPACE: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (c < 256 && (md->ctypes[c] & ctype_space) != 0) break; + eptr+= len; + COST_CHK(1); + } + break; + + case OP_WHITESPACE: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (c >= 256 ||(md->ctypes[c] & ctype_space) == 0) break; + eptr+= len; + COST_CHK(1); + } + break; + + case OP_NOT_WORDCHAR: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (c < 256 && (md->ctypes[c] & ctype_word) != 0) break; + eptr+= len; + COST_CHK(1); + } + break; + + case OP_WORDCHAR: + for (i = min; i < max; i++) + { + int len = 1; + if (eptr >= md->end_subject) break; + GETCHARLEN(c, eptr, len); + if (c >= 256 || (md->ctypes[c] & ctype_word) == 0) break; + eptr+= len; + COST_CHK(1); + } + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + + /* eptr is now past the end of the maximum run */ + + if (possessive) continue; + for(;;) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM46); + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + if (eptr-- == pp) break; /* Stop if tried at original pos */ + BACKCHAR(eptr); + } + } + else +#endif /* SUPPORT_UTF8 */ + + /* Not UTF-8 mode */ + { + switch(ctype) + { + case OP_ANY: + if ((ims & PCRE_DOTALL) == 0) + { + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || IS_NEWLINE(eptr)) break; + eptr++; + COST_CHK(1); + } + break; + } + /* For DOTALL case, fall through and treat as \C */ + + case OP_ANYBYTE: + c = max - min; + if (c > (unsigned int)(md->end_subject - eptr)) + c = md->end_subject - eptr; + eptr += c; + break; + + case OP_ANYNL: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) break; + c = *eptr; + if (c == 0x000d) + { + if (++eptr >= md->end_subject) break; + if (*eptr == 0x000a) eptr++; + } + else + { + if (c != 0x000a && + (md->bsr_anycrlf || + (c != 0x000b && c != 0x000c && c != 0x0085))) + break; + eptr++; + } + COST_CHK(1); + } + break; + + case OP_NOT_HSPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) break; + c = *eptr; + if (c == 0x09 || c == 0x20 || c == 0xa0) break; + eptr++; + COST_CHK(1); + } + break; + + case OP_HSPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) break; + c = *eptr; + if (c != 0x09 && c != 0x20 && c != 0xa0) break; + eptr++; + COST_CHK(1); + } + break; + + case OP_NOT_VSPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) break; + c = *eptr; + if (c == 0x0a || c == 0x0b || c == 0x0c || c == 0x0d || c == 0x85) + break; + eptr++; + COST_CHK(1); + } + break; + + case OP_VSPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject) break; + c = *eptr; + if (c != 0x0a && c != 0x0b && c != 0x0c && c != 0x0d && c != 0x85) + break; + eptr++; + COST_CHK(1); + } + break; + + case OP_NOT_DIGIT: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) != 0) + break; + eptr++; + COST_CHK(1); + } + break; + + case OP_DIGIT: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) == 0) + break; + eptr++; + COST_CHK(1); + } + break; + + case OP_NOT_WHITESPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) != 0) + break; + eptr++; + COST_CHK(1); + } + break; + + case OP_WHITESPACE: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) == 0) + break; + eptr++; + COST_CHK(1); + } + break; + + case OP_NOT_WORDCHAR: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) != 0) + break; + eptr++; + COST_CHK(1); + } + break; + + case OP_WORDCHAR: + for (i = min; i < max; i++) + { + if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) == 0) + break; + eptr++; + COST_CHK(1); + } + break; + + default: + RRETURN(PCRE_ERROR_INTERNAL); + } + + /* eptr is now past the end of the maximum run */ + + if (possessive) continue; + while (eptr >= pp) /* PaN: OK */ + { + RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM47); + eptr--; + if (rrc != MATCH_NOMATCH) RRETURN(rrc); + } + } + + /* Get here if we can't make it match with any permitted repetitions */ + + RRETURN(MATCH_NOMATCH); + } + /* Control never gets here */ + + /* There's been some horrible disaster. Arrival here can only mean there is + something seriously wrong in the code above or the OP_xxx definitions. */ + + default: + DPRINTF(("Unknown opcode %d\n", *ecode)); + RRETURN(PCRE_ERROR_UNKNOWN_OPCODE); + } + + /* Do not stick any code in here without much thought; it is assumed + that "continue" in the code above comes out to here to repeat the main + loop. */ + + } /* End of main loop */ +/* Control never reaches here */ + + +/* When compiling to use the heap rather than the stack for recursive calls to +match(), the RRETURN() macro jumps here. The number that is saved in +frame->Xwhere indicates which label we actually want to return to. */ + +#ifdef NO_RECURSE +#define LBL(val) case val: goto L_RM##val; +HEAP_RETURN: +switch (frame->Xwhere) + { + LBL( 1) LBL( 2) LBL( 3) LBL( 4) LBL( 5) LBL( 6) LBL( 7) LBL( 8) + LBL( 9) LBL(10) LBL(11) LBL(12) LBL(13) LBL(14) LBL(15) LBL(17) + LBL(19) LBL(24) LBL(25) LBL(26) LBL(27) LBL(29) LBL(31) LBL(33) + LBL(35) LBL(43) LBL(47) LBL(48) LBL(49) LBL(50) LBL(51) LBL(52) + LBL(53) LBL(54) +#ifdef SUPPORT_UTF8 + LBL(16) LBL(18) LBL(20) LBL(21) LBL(22) LBL(23) LBL(28) LBL(30) + LBL(32) LBL(34) LBL(42) LBL(46) +#ifdef SUPPORT_UCP + LBL(36) LBL(37) LBL(38) LBL(39) LBL(40) LBL(41) LBL(44) LBL(45) +#endif /* SUPPORT_UCP */ +#endif /* SUPPORT_UTF8 */ + default: + DPRINTF(("jump error in pcre match: label %d non-existent\n", frame->Xwhere)); + return PCRE_ERROR_INTERNAL; + } +#undef LBL + + +#ifdef ERLANG_INTEGRATION +LOOP_COUNT_RETURN: + /* Restore the saved register variables in the upper dummy frame, description below */ + { + heapframe *newframe = frame; + frame = newframe->Xprevframe; + rrc = newframe->Xop; + i = newframe->Xfi; + c = newframe->Xfc; + utf8 = newframe->Xcur_is_word; + minimize = newframe->Xcondition; + possessive = newframe->Xprev_is_word; + (erts_pcre_stack_free)(newframe); + EDEBUGF(("LOOP_COUNT_RETURN: %d",frame->Xwhere)); + switch (frame->Xwhere) + { +#include "pcre_exec_loop_break_cases.inc" + default: + DPRINTF(("jump error in pcre match: label %d non-existent\n", frame->Xwhere)); + return PCRE_ERROR_INTERNAL; + } + } + +LOOP_COUNT_BREAK: + /* Save the local register variables in a dummy frame, to keep the + * every frame of equal size rule */ + /* + * Store Local in + * ------------------------------ -------------- + * rrc Xop + * i Xfi + * c Xfc + * utf8 Xcur_is_word + * minimize Xcondition + * possessive Xprev_is_word + */ + { + heapframe *newframe = (erts_pcre_stack_malloc)(sizeof(heapframe)); + newframe->Xprevframe = frame; + newframe->Xop = rrc; + newframe->Xfi = i; + newframe->Xfc = c; + newframe->Xcur_is_word = utf8; + newframe->Xcondition = minimize; + newframe->Xprev_is_word = possessive; + md->state_save = newframe; + md->loop_limit = 0; + EDEBUGF(("Break loop!")); + return PCRE_ERROR_LOOP_LIMIT; + } +#endif + +#endif /* NO_RECURSE */ +} + +#ifdef ERLANG_INTEGRATION +static void free_saved_match_state(heapframe *top) { + while (top != NULL) { + heapframe *nxt = top->Xprevframe; + (erts_pcre_stack_free)(top); + top = nxt; + } +} +#endif + + +/*************************************************************************** +**************************************************************************** + RECURSION IN THE match() FUNCTION + +Undefine all the macros that were defined above to handle this. */ + +#ifdef NO_RECURSE +#undef eptr +#undef ecode +#undef mstart +#undef offset_top +#undef ims +#undef eptrb +#undef flags + +#undef callpat +#undef charptr +#undef data +#undef next +#undef pp +#undef prev +#undef saved_eptr + +#undef new_recursive + +#undef cur_is_word +#undef condition +#undef prev_is_word + +#undef original_ims + +#undef ctype +#undef length +#undef max +#undef min +#undef number +#undef offset +#undef op +#undef save_capture_last +#undef save_offset1 +#undef save_offset2 +#undef save_offset3 +#undef stacksave + +#undef newptrb + +#endif + +/* These two are defined as macros in both cases */ + +#undef fc +#undef fi + +/*************************************************************************** +***************************************************************************/ + + + +/************************************************* +* Execute a Regular Expression * +*************************************************/ + +/* This function applies a compiled re to a subject string and picks out +portions of the string if it matches. Two elements in the vector are set for +each substring: the offsets to the start and end of the substring. + +Arguments: + argument_re points to the compiled expression + extra_data points to extra data or is NULL + subject points to the subject string + length length of subject string (may contain binary zeros) + start_offset where to start in the subject string + options option bits + offsets points to a vector of ints to be filled in with offsets + offsetcount the number of elements in the vector + +Returns: > 0 => success; value is the number of elements filled in + = 0 => success, but offsets is not big enough + -1 => failed to match + < -1 => some kind of unexpected problem +*/ +#ifdef ERLANG_INTEGRATION +typedef struct { + int Xresetcount; + int Xfirst_byte; + BOOL Xfirst_byte_caseless; + int Xreq_byte; + int Xreq_byte2; + unsigned long int Xims; + BOOL Xreq_byte_caseless; + BOOL Xusing_temporary_offsets; + BOOL Xanchored; + BOOL Xstartline; + BOOL Xfirstline; + BOOL Xutf8; + match_data Xmatch_block; + match_data *Xmd; + const uschar *Xtables; /* may point to extra_data->tables, so the tables cannot be relocated + between restarts */ + const uschar *Xstart_bits; /* Points into study, so if studies are used, *they* + cannot be relocated between restarts */ + /* The following points into the subject, so the sublect needs to stay put too */ + USPTR Xstart_match; + USPTR Xend_subject; + USPTR Xreq_byte_ptr; + /* We'll handle internal studies and re's although this will not happen + in the erlang emulator in current implementation */ + pcre_study_data Xinternal_study; + const pcre_study_data *Xstudy; + + real_pcre Xinternal_re; + const real_pcre *Xexternal_re; + const real_pcre *Xre; + /* Original function parameters that need be saved */ + int Xstart_offset; + int Xoffsetcount; + int *Xoffsets; +} PcreExecContext; +#endif + +PCRE_EXP_DEFN int +erts_pcre_exec(const pcre *argument_re, const pcre_extra *extra_data, + PCRE_SPTR subject, int length, int start_offset, int options, int *offsets, + int offsetcount) +{ +#ifndef ERLANG_INTEGRATION +int rc, resetcount, ocount; +int first_byte = -1; +int req_byte = -1; +int req_byte2 = -1; +int newline; +unsigned long int ims; +BOOL using_temporary_offsets = FALSE; +BOOL anchored; +BOOL startline; +BOOL firstline; +BOOL first_byte_caseless = FALSE; +BOOL req_byte_caseless = FALSE; +BOOL utf8; +match_data match_block; +match_data *md = &match_block; +const uschar *tables; +const uschar *start_bits = NULL; +USPTR start_match = (USPTR)subject + start_offset; +USPTR end_subject; +USPTR req_byte_ptr = start_match - 1; + +pcre_study_data internal_study; +const pcre_study_data *study; + +real_pcre internal_re; +const real_pcre *external_re = (const real_pcre *)argument_re; +const real_pcre *re = external_re; + +#else + +/* "local" variables in faked stackframe instead */ +#define resetcount (exec_context->Xresetcount) +#define req_byte2 (exec_context->Xreq_byte2) +#define using_temporary_offsets (exec_context->Xusing_temporary_offsets) +#define anchored (exec_context->Xanchored) +#define startline (exec_context->Xstartline) +#define firstline (exec_context->Xfirstline) +#define first_byte_caseless (exec_context->Xfirst_byte_caseless) +#define req_byte_caseless (exec_context->Xreq_byte_caseless) +#define match_block (exec_context->Xmatch_block) +#define md (exec_context->Xmd) +#define start_match (exec_context->Xstart_match) +#define req_byte_ptr (exec_context->Xreq_byte_ptr) +#define internal_study (exec_context->Xinternal_study) +#define study (exec_context->Xstudy) +#define internal_re (exec_context->Xinternal_re) +#define external_re (exec_context->Xexternal_re) +#define re (exec_context->Xre) +#define ims (exec_context->Xims) + +#define SWAPIN() do { \ + utf8 = exec_context->Xutf8; \ + first_byte = exec_context->Xfirst_byte; \ + tables = exec_context->Xtables; \ + start_bits = exec_context->Xstart_bits; \ + end_subject = exec_context->Xend_subject; \ + req_byte = exec_context->Xreq_byte; \ + start_offset = exec_context->Xstart_offset; \ + offsetcount = exec_context->Xoffsetcount; \ + offsets = exec_context->Xoffsets; \ +} while (0) + +#define SWAPOUT() do { \ + exec_context->Xutf8 = utf8; \ + exec_context->Xfirst_byte = first_byte; \ + exec_context->Xtables = tables; \ + exec_context->Xstart_bits = start_bits; \ + exec_context->Xend_subject = end_subject; \ + exec_context->Xreq_byte = req_byte; \ + exec_context->Xstart_offset = start_offset; \ + exec_context->Xoffsetcount = offsetcount; \ + exec_context->Xoffsets = offsets; \ +} while (0) + +PcreExecContext *exec_context; +PcreExecContext internal_context; + +int rc, ocount; +int newline; + +/* special variables follow, swapped in and out */ +BOOL utf8; +int first_byte; +const uschar *tables; +const uschar *start_bits; +USPTR end_subject; +int req_byte; +/* End special swapped variables */ + + if (extra_data != NULL && + (extra_data->flags & PCRE_EXTRA_LOOP_LIMIT) && + *(extra_data->restart_data) != NULL) { + /* we are restarting, every initialization is skipped and we jump directly into the loop */ + exec_context = (PcreExecContext *) *(extra_data->restart_data); + SWAPIN(); + goto RESTART_INTERRUPTED; + } else { + if (extra_data != NULL && + (extra_data->flags & PCRE_EXTRA_LOOP_LIMIT)) { + exec_context = (PcreExecContext *) (erts_pcre_malloc)(sizeof(PcreExecContext)); + *(extra_data->restart_data) = (void *) exec_context; + /* need freeing by special routine from client */ + } else { + exec_context = &internal_context; + } + + /* OK, no restart here, initialize variables instead */ + first_byte = -1; + req_byte = -1; + req_byte2 = -1; + using_temporary_offsets = FALSE; + first_byte_caseless = FALSE; + req_byte_caseless = FALSE; + md = &match_block; + start_bits = NULL; + start_match = (USPTR)subject + start_offset; + req_byte_ptr = start_match - 1; + external_re = (const real_pcre *)argument_re; + re = external_re; + + md->state_save = NULL; + +} + +#endif /* ERLANG_INTEGRATION */ + + +/* Plausibility checks */ + +if ((options & ~PUBLIC_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION; +if (re == NULL || subject == NULL || + (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL; +if (offsetcount < 0) return PCRE_ERROR_BADCOUNT; + +/* Fish out the optional data from the extra_data structure, first setting +the default values. */ + +study = NULL; +md->match_limit = MATCH_LIMIT; +md->match_limit_recursion = MATCH_LIMIT_RECURSION; +md->callout_data = NULL; + +/* The table pointer is always in native byte order. */ + +tables = external_re->tables; + +if (extra_data != NULL) + { + register unsigned int flags = extra_data->flags; + if ((flags & PCRE_EXTRA_STUDY_DATA) != 0) + study = (const pcre_study_data *)extra_data->study_data; + if ((flags & PCRE_EXTRA_MATCH_LIMIT) != 0) + md->match_limit = extra_data->match_limit; + if ((flags & PCRE_EXTRA_MATCH_LIMIT_RECURSION) != 0) + md->match_limit_recursion = extra_data->match_limit_recursion; + if ((flags & PCRE_EXTRA_CALLOUT_DATA) != 0) + md->callout_data = extra_data->callout_data; + if ((flags & PCRE_EXTRA_TABLES) != 0) tables = extra_data->tables; +#ifdef ERLANG_INTEGRATION + if ((flags & PCRE_EXTRA_LOOP_LIMIT) != 0) + { + md->loop_limit = extra_data->loop_limit; + } +#endif + } + +/* If the exec call supplied NULL for tables, use the inbuilt ones. This +is a feature that makes it possible to save compiled regex and re-use them +in other programs later. */ + +if (tables == NULL) tables = _erts_pcre_default_tables; + +/* Check that the first field in the block is the magic number. If it is not, +test for a regex that was compiled on a host of opposite endianness. If this is +the case, flipped values are put in internal_re and internal_study if there was +study data too. */ + +if (re->magic_number != MAGIC_NUMBER) + { + re = _erts_pcre_try_flipped(re, &internal_re, study, &internal_study); + if (re == NULL) return PCRE_ERROR_BADMAGIC; + if (study != NULL) study = &internal_study; + } + +/* Set up other data */ + +anchored = ((re->options | options) & PCRE_ANCHORED) != 0; +startline = (re->flags & PCRE_STARTLINE) != 0; +firstline = (re->options & PCRE_FIRSTLINE) != 0; + +/* The code starts after the real_pcre block and the capture name table. */ + +md->start_code = (const uschar *)external_re + re->name_table_offset + + re->name_count * re->name_entry_size; + +md->start_subject = (USPTR)subject; +md->start_offset = start_offset; +md->end_subject = md->start_subject + length; +end_subject = md->end_subject; + +md->endonly = (re->options & PCRE_DOLLAR_ENDONLY) != 0; +utf8 = md->utf8 = (re->options & PCRE_UTF8) != 0; + +md->notbol = (options & PCRE_NOTBOL) != 0; +md->noteol = (options & PCRE_NOTEOL) != 0; +md->notempty = (options & PCRE_NOTEMPTY) != 0; +md->partial = (options & PCRE_PARTIAL) != 0; +md->hitend = FALSE; + +md->recursive = NULL; /* No recursion at top level */ + +md->lcc = tables + lcc_offset; +md->ctypes = tables + ctypes_offset; + +/* Handle different \R options. */ + +switch (options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) + { + case 0: + if ((re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) != 0) + md->bsr_anycrlf = (re->options & PCRE_BSR_ANYCRLF) != 0; + else +#ifdef BSR_ANYCRLF + md->bsr_anycrlf = TRUE; +#else + md->bsr_anycrlf = FALSE; +#endif + break; + + case PCRE_BSR_ANYCRLF: + md->bsr_anycrlf = TRUE; + break; + + case PCRE_BSR_UNICODE: + md->bsr_anycrlf = FALSE; + break; + + default: return PCRE_ERROR_BADNEWLINE; + } + +/* Handle different types of newline. The three bits give eight cases. If +nothing is set at run time, whatever was used at compile time applies. */ + +switch ((((options & PCRE_NEWLINE_BITS) == 0)? re->options : + (pcre_uint32)options) & PCRE_NEWLINE_BITS) + { + case 0: newline = NEWLINE; break; /* Compile-time default */ + case PCRE_NEWLINE_CR: newline = '\r'; break; + case PCRE_NEWLINE_LF: newline = '\n'; break; + case PCRE_NEWLINE_CR+ + PCRE_NEWLINE_LF: newline = ('\r' << 8) | '\n'; break; + case PCRE_NEWLINE_ANY: newline = -1; break; + case PCRE_NEWLINE_ANYCRLF: newline = -2; break; + default: return PCRE_ERROR_BADNEWLINE; + } + +if (newline == -2) + { + md->nltype = NLTYPE_ANYCRLF; + } +else if (newline < 0) + { + md->nltype = NLTYPE_ANY; + } +else + { + md->nltype = NLTYPE_FIXED; + if (newline > 255) + { + md->nllen = 2; + md->nl[0] = (newline >> 8) & 255; + md->nl[1] = newline & 255; + } + else + { + md->nllen = 1; + md->nl[0] = newline; + } + } + +/* Partial matching is supported only for a restricted set of regexes at the +moment. */ + +if (md->partial && (re->flags & PCRE_NOPARTIAL) != 0) + return PCRE_ERROR_BADPARTIAL; + +/* Check a UTF-8 string if required. Unfortunately there's no way of passing +back the character offset. */ + +#ifdef SUPPORT_UTF8 +if (utf8 && (options & PCRE_NO_UTF8_CHECK) == 0) + { + if (_erts_pcre_valid_utf8((uschar *)subject, length) >= 0) + return PCRE_ERROR_BADUTF8; + if (start_offset > 0 && start_offset < length) + { + int tb = ((uschar *)subject)[start_offset]; + if (tb > 127) + { + tb &= 0xc0; + if (tb != 0 && tb != 0xc0) return PCRE_ERROR_BADUTF8_OFFSET; + } + } + } +#endif + +/* The ims options can vary during the matching as a result of the presence +of (?ims) items in the pattern. They are kept in a local variable so that +restoring at the exit of a group is easy. */ + +ims = re->options & (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL); + +/* If the expression has got more back references than the offsets supplied can +hold, we get a temporary chunk of working store to use during the matching. +Otherwise, we can use the vector supplied, rounding down its size to a multiple +of 3. */ + +ocount = offsetcount - (offsetcount % 3); + +if (re->top_backref > 0 && re->top_backref >= ocount/3) + { + ocount = re->top_backref * 3 + 3; + md->offset_vector = (int *)(erts_pcre_malloc)(ocount * sizeof(int)); + if (md->offset_vector == NULL) return PCRE_ERROR_NOMEMORY; + using_temporary_offsets = TRUE; + DPRINTF(("Got memory to hold back references\n")); + } +else md->offset_vector = offsets; + +md->offset_end = ocount; +md->offset_max = (2*ocount)/3; +md->offset_overflow = FALSE; +md->capture_last = -1; + +/* Compute the minimum number of offsets that we need to reset each time. Doing +this makes a huge difference to execution time when there aren't many brackets +in the pattern. */ + +resetcount = 2 + re->top_bracket * 2; +if (resetcount > offsetcount) resetcount = ocount; + +/* Reset the working variable associated with each extraction. These should +never be used unless previously set, but they get saved and restored, and so we +initialize them to avoid reading uninitialized locations. */ + +if (md->offset_vector != NULL) + { + register int *iptr = md->offset_vector + ocount; + register int *iend = iptr - resetcount/2 + 1; + while (--iptr >= iend) *iptr = -1; + } + +/* Set up the first character to match, if available. The first_byte value is +never set for an anchored regular expression, but the anchoring may be forced +at run time, so we have to test for anchoring. The first char may be unset for +an unanchored pattern, of course. If there's no first char and the pattern was +studied, there may be a bitmap of possible first characters. */ + +if (!anchored) + { + if ((re->flags & PCRE_FIRSTSET) != 0) + { + first_byte = re->first_byte & 255; + if ((first_byte_caseless = ((re->first_byte & REQ_CASELESS) != 0)) == TRUE) + first_byte = md->lcc[first_byte]; + } + else + if (!startline && study != NULL && + (study->options & PCRE_STUDY_MAPPED) != 0) + start_bits = study->start_bits; + } + +/* For anchored or unanchored matches, there may be a "last known required +character" set. */ + +if ((re->flags & PCRE_REQCHSET) != 0) + { + req_byte = re->req_byte & 255; + req_byte_caseless = (re->req_byte & REQ_CASELESS) != 0; + req_byte2 = (tables + fcc_offset)[req_byte]; /* case flipped */ + } + + +/* ==========================================================================*/ + +/* Loop for handling unanchored repeated matching attempts; for anchored regexs +the loop runs just once. */ + +for(;;) + { + USPTR save_end_subject = end_subject; + USPTR new_start_match; + + /* Reset the maximum number of extractions we might see. */ + + if (md->offset_vector != NULL) + { + register int *iptr = md->offset_vector; + register int *iend = iptr + resetcount; + while (iptr < iend) *iptr++ = -1; + } + + /* Advance to a unique first char if possible. If firstline is TRUE, the + start of the match is constrained to the first line of a multiline string. + That is, the match must be before or at the first newline. Implement this by + temporarily adjusting end_subject so that we stop scanning at a newline. If + the match fails at the newline, later code breaks this loop. */ + + if (firstline) + { + USPTR t = start_match; + while (t < md->end_subject && !IS_NEWLINE(t)) t++; + end_subject = t; + } + + /* Now test for a unique first byte */ + + if (first_byte >= 0) + { + if (first_byte_caseless) + while (start_match < end_subject && + md->lcc[*start_match] != first_byte) + { NEXTCHAR(start_match,end_subject); } + else + while (start_match < end_subject && *start_match != first_byte) + { NEXTCHAR(start_match,end_subject); } + } + + /* Or to just after a linebreak for a multiline match if possible */ + + else if (startline) + { + if (start_match > md->start_subject + start_offset) + { + while (start_match <= end_subject && !WAS_NEWLINE(start_match)) + { NEXTCHAR(start_match,end_subject); } + + /* If we have just passed a CR and the newline option is ANY or ANYCRLF, + and we are now at a LF, advance the match position by one more character. + */ + + if (start_match <= end_subject && start_match[-1] == '\r' && + (md->nltype == NLTYPE_ANY || md->nltype == NLTYPE_ANYCRLF) && + start_match < end_subject && + *start_match == '\n') + start_match++; + } + } + + /* Or to a non-unique first char after study */ + + else if (start_bits != NULL) + { + while (start_match < end_subject) + { + register unsigned int c = *start_match; + if ((start_bits[c/8] & (1 << (c&7))) == 0) + { NEXTCHAR(start_match,end_subject); } +#ifdef ERLANG_INTEGRATION + else { + if ((extra_data->flags & PCRE_EXTRA_LOOP_LIMIT) != 0) + { + *extra_data->loop_counter_return = + (extra_data->loop_limit - md->loop_limit); + } + break; + } +#else + else break; +#endif + } + } + + /* Restore fudged end_subject */ + + end_subject = save_end_subject; + +#ifdef DEBUG /* Sigh. Some compilers never learn. */ + printf(">>>> Match against: "); + pchars(start_match, end_subject - start_match, TRUE, md); + printf("\n"); +#endif + + /* If req_byte is set, we know that that character must appear in the subject + for the match to succeed. If the first character is set, req_byte must be + later in the subject; otherwise the test starts at the match point. This + optimization can save a huge amount of backtracking in patterns with nested + unlimited repeats that aren't going to match. Writing separate code for + cased/caseless versions makes it go faster, as does using an autoincrement + and backing off on a match. + + HOWEVER: when the subject string is very, very long, searching to its end can + take a long time, and give bad performance on quite ordinary patterns. This + showed up when somebody was matching something like /^\d+C/ on a 32-megabyte + string... so we don't do this when the string is sufficiently long. + + ALSO: this processing is disabled when partial matching is requested. + */ + + if (req_byte >= 0 && + end_subject - start_match < REQ_BYTE_MAX && + !md->partial) + { + register USPTR p = start_match + ((first_byte >= 0)? 1 : 0); + + /* We don't need to repeat the search if we haven't yet reached the + place we found it at last time. */ + + if (p > req_byte_ptr) + { + if (req_byte_caseless) + { + while (p < end_subject) + { + register int pp = *p++; + if (pp == req_byte || pp == req_byte2) { p--; break; } + } + } + else + { + while (p < end_subject) + { + if (*p++ == req_byte) { p--; break; } + } + } + + /* If we can't find the required character, break the matching loop, + forcing a match failure. */ + + if (p >= end_subject) + { + rc = MATCH_NOMATCH; +#ifdef ERLANG_INTEGRATION + if ((extra_data->flags & PCRE_EXTRA_LOOP_LIMIT) != 0) + { + *extra_data->loop_counter_return = + (extra_data->loop_limit - md->loop_limit); + } +#endif + break; + } + + /* If we have found the required character, save the point where we + found it, so that we don't search again next time round the loop if + the start hasn't passed this character yet. */ + + req_byte_ptr = p; + } + } + + /* OK, we can now run the match. */ + + md->start_match_ptr = start_match; + md->match_call_count = 0; + EDEBUGF(("Calling match...")); + rc = match(start_match, md->start_code, start_match, 2, md, ims, NULL, 0, 0); +#ifdef ERLANG_INTEGRATION + if ((extra_data->flags & PCRE_EXTRA_LOOP_LIMIT) != 0) + { + *extra_data->loop_counter_return = + (extra_data->loop_limit - md->loop_limit); + } + SWAPOUT(); + while(rc == PCRE_ERROR_LOOP_LIMIT) { + EDEBUGF(("Loop limit break detected")); + return PCRE_ERROR_LOOP_LIMIT; + RESTART_INTERRUPTED: + md->match_call_count = 0; + md->loop_limit = extra_data->loop_limit; + rc = match(NULL,NULL,NULL,0,md,0,NULL,0,0); + *extra_data->loop_counter_return = + (extra_data->loop_limit - md->loop_limit); + } + md->state_save = NULL; /* So that next call to free_saved... does not crash */ +#endif + + switch(rc) + { + /* NOMATCH and PRUNE advance by one character. THEN at this level acts + exactly like PRUNE. */ + + case MATCH_NOMATCH: + case MATCH_PRUNE: + case MATCH_THEN: + new_start_match = start_match + 1; +#ifdef SUPPORT_UTF8 + if (utf8) + while(new_start_match < end_subject && (*new_start_match & 0xc0) == 0x80) + new_start_match++; +#endif + break; + + /* SKIP passes back the next starting point explicitly. */ + + case MATCH_SKIP: + new_start_match = md->start_match_ptr; + break; + + /* COMMIT disables the bumpalong, but otherwise behaves as NOMATCH. */ + + case MATCH_COMMIT: + rc = MATCH_NOMATCH; + goto ENDLOOP; + + /* Any other return is some kind of error. */ + + default: + goto ENDLOOP; + } + + /* Control reaches here for the various types of "no match at this point" + result. Reset the code to MATCH_NOMATCH for subsequent checking. */ + + rc = MATCH_NOMATCH; + + /* If PCRE_FIRSTLINE is set, the match must happen before or at the first + newline in the subject (though it may continue over the newline). Therefore, + if we have just failed to match, starting at a newline, do not continue. */ + + if (firstline && IS_NEWLINE(start_match)) break; + + /* Advance to new matching position */ + + start_match = new_start_match; + + /* Break the loop if the pattern is anchored or if we have passed the end of + the subject. */ + + if (anchored || start_match > end_subject) break; + + /* If we have just passed a CR and we are now at a LF, and the pattern does + not contain any explicit matches for \r or \n, and the newline option is CRLF + or ANY or ANYCRLF, advance the match position by one more character. */ + + if (start_match[-1] == '\r' && + start_match < end_subject && + *start_match == '\n' && + (re->flags & PCRE_HASCRORLF) == 0 && + (md->nltype == NLTYPE_ANY || + md->nltype == NLTYPE_ANYCRLF || + md->nllen == 2)) + start_match++; + + } /* End of for(;;) "bumpalong" loop */ + +/* ==========================================================================*/ + +/* We reach here when rc is not MATCH_NOMATCH, or if one of the stopping +conditions is true: + +(1) The pattern is anchored or the match was failed by (*COMMIT); + +(2) We are past the end of the subject; + +(3) PCRE_FIRSTLINE is set and we have failed to match at a newline, because + this option requests that a match occur at or before the first newline in + the subject. + +When we have a match and the offset vector is big enough to deal with any +backreferences, captured substring offsets will already be set up. In the case +where we had to get some local store to hold offsets for backreference +processing, copy those that we can. In this case there need not be overflow if +certain parts of the pattern were not used, even though there are more +capturing parentheses than vector slots. */ + +ENDLOOP: + +if (rc == MATCH_MATCH) + { + if (using_temporary_offsets) + { + if (offsetcount >= 4) + { + memcpy(offsets + 2, md->offset_vector + 2, + (offsetcount - 2) * sizeof(int)); + DPRINTF(("Copied offsets from temporary memory\n")); + } + if (md->end_offset_top > offsetcount) md->offset_overflow = TRUE; + DPRINTF(("Freeing temporary memory\n")); +#ifdef ERLANG_INTEGRATION + if (extra_data == NULL || + !(extra_data->flags & PCRE_EXTRA_LOOP_LIMIT)) { + (erts_pcre_free)(md->offset_vector); + } +#else + (erts_pcre_free)(md->offset_vector); +#endif + } + + /* Set the return code to the number of captured strings, or 0 if there are + too many to fit into the vector. */ + + rc = md->offset_overflow? 0 : md->end_offset_top/2; + + /* If there is space, set up the whole thing as substring 0. The value of + md->start_match_ptr might be modified if \K was encountered on the success + matching path. */ + + if (offsetcount < 2) rc = 0; else + { + offsets[0] = md->start_match_ptr - md->start_subject; + offsets[1] = md->end_match_ptr - md->start_subject; + } + + DPRINTF((">>>> returning %d\n", rc)); + return rc; + } + +/* Control gets here if there has been an error, or if the overall match +attempt has failed at all permitted starting positions. */ + +if (using_temporary_offsets) + { + DPRINTF(("Freeing temporary memory\n")); + (erts_pcre_free)(md->offset_vector); + } + +if (rc != MATCH_NOMATCH) + { + DPRINTF((">>>> error: returning %d\n", rc)); + return rc; + } +else if (md->partial && md->hitend) + { + DPRINTF((">>>> returning PCRE_ERROR_PARTIAL\n")); + return PCRE_ERROR_PARTIAL; + } +else + { + DPRINTF((">>>> returning PCRE_ERROR_NOMATCH\n")); + return PCRE_ERROR_NOMATCH; + } +} +#ifdef ERLANG_INTEGRATION +#undef resetcount +#undef req_byte2 +#undef using_temporary_offsets +#undef anchored +#undef startline +#undef firstline +#undef first_byte_caseless +#undef req_byte_caseless +#undef match_block +#undef md +#undef start_match +#undef req_byte_ptr +#undef internal_study +#undef study +#undef internal_re +#undef external_re +#undef re +#undef ims + +void erts_pcre_free_restart_data(void *restart_data) { + PcreExecContext *top = (PcreExecContext *) restart_data; + /* We might be done, or we might not, so there might be some saved match_states here */ + if (top != NULL) { + match_data *md = top->Xmd; + if (top->Xusing_temporary_offsets && md->offset_vector != NULL) { + (erts_pcre_free)(md->offset_vector); + } + free_saved_match_state(top->Xmd->state_save); + (erts_pcre_free)(top); + } +} +#endif + +/* End of pcre_exec.c */ -- cgit v1.2.3