From 626f4720baafedca7a58711c0e8d30a2f1b522ee Mon Sep 17 00:00:00 2001 From: Peter Andersson Date: Sat, 5 Jan 2013 15:09:58 +0100 Subject: Add test case to verify that config data gets properly restored --- lib/common_test/test/ct_error_SUITE.erl | 35 ++- .../error/test/config_restored_SUITE.erl | 175 +++++++++++++ .../error/test/verify_config.erl | 284 +++++++++++++++++++++ 3 files changed, 490 insertions(+), 4 deletions(-) create mode 100644 lib/common_test/test/ct_error_SUITE_data/error/test/config_restored_SUITE.erl create mode 100644 lib/common_test/test/ct_error_SUITE_data/error/test/verify_config.erl (limited to 'lib/common_test') diff --git a/lib/common_test/test/ct_error_SUITE.erl b/lib/common_test/test/ct_error_SUITE.erl index 6d90b29f41..a077cb2560 100644 --- a/lib/common_test/test/ct_error_SUITE.erl +++ b/lib/common_test/test/ct_error_SUITE.erl @@ -44,8 +44,12 @@ %% there will be clashes with logging processes etc). %%-------------------------------------------------------------------- init_per_suite(Config) -> - Config1 = ct_test_support:init_per_suite(Config), - Config1. + DataDir = ?config(data_dir, Config), + TestDir = filename:join(DataDir, "error/test/"), + CTH = filename:join(TestDir, "verify_config.erl"), + ct:pal("Compiling ~p: ~p", + [CTH,compile:file(CTH,[{outdir,TestDir},debug_info])]), + ct_test_support:init_per_suite([{path_dirs,[TestDir]} | Config]). end_per_suite(Config) -> ct_test_support:end_per_suite(Config). @@ -61,7 +65,8 @@ suite() -> [{ct_hooks,[ts_install_cth]}]. all() -> [cfg_error, lib_error, no_compile, timetrap_end_conf, timetrap_normal, timetrap_extended, timetrap_parallel, - timetrap_fun, timetrap_fun_group, misc_errors]. + timetrap_fun, timetrap_fun_group, misc_errors, + config_restored]. groups() -> []. @@ -285,6 +290,24 @@ misc_errors(Config) when is_list(Config) -> TestEvents = events_to_check(misc_errors), ok = ct_test_support:verify_events(TestEvents, Events, Config). +%%%----------------------------------------------------------------- +%%% +config_restored(Config) when is_list(Config) -> + DataDir = ?config(data_dir, Config), + Suite = filename:join(DataDir, "error/test/config_restored_SUITE"), + {Opts,ERPid} = setup([{suite,Suite}, + {ct_hooks,[verify_config]}], + Config), + ok = ct_test_support:run(Opts, Config), + Events = ct_test_support:get_events(ERPid, Config), + + ct_test_support:log_events(config_restored, + reformat(Events, ?eh), + ?config(priv_dir, Config), + Opts), + + TestEvents = events_to_check(config_restored), + ok = ct_test_support:verify_events(TestEvents, Events, Config). %%%----------------------------------------------------------------- %%% HELP FUNCTIONS @@ -1439,4 +1462,8 @@ test_events(misc_errors) -> {?eh,test_stats,{2,7,{0,0}}}, {?eh,test_done,{'DEF','STOP_TIME'}}, {?eh,stop_logging,[]} - ]. + ]; + +test_events(config_restored) -> + []. + diff --git a/lib/common_test/test/ct_error_SUITE_data/error/test/config_restored_SUITE.erl b/lib/common_test/test/ct_error_SUITE_data/error/test/config_restored_SUITE.erl new file mode 100644 index 0000000000..fb47f2bcb9 --- /dev/null +++ b/lib/common_test/test/ct_error_SUITE_data/error/test/config_restored_SUITE.erl @@ -0,0 +1,175 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2010-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +-module(config_restored_SUITE). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). + +%%-------------------------------------------------------------------- +%% Function: suite() -> Info +%% Info = [tuple()] +%%-------------------------------------------------------------------- +suite() -> + [{timetrap,1000}]. + +%%-------------------------------------------------------------------- +%% Function: init_per_suite(Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%%-------------------------------------------------------------------- +init_per_suite(Config) -> + Config1 = [{init_per_suite,?MODULE} | Config], + TabPid = spawn(fun() -> + ets:new(?MODULE, [named_table, set, public]), + receive _ -> ok end + end), + [{tab,TabPid} | Config1]. + +%%-------------------------------------------------------------------- +%% Function: end_per_suite(Config0) -> void() | {save_config,Config1} +%% Config0 = Config1 = [tuple()] +%%-------------------------------------------------------------------- +end_per_suite(Config) -> + ets:delete(?MODULE), + exit(?config(tab, Config), kill), + ok. + +%%-------------------------------------------------------------------- +%% Function: init_per_group(GroupName, Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% GroupName = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%%-------------------------------------------------------------------- +init_per_group(GroupName, Config) -> + [{init_per_group,GroupName} | Config]. + +%%-------------------------------------------------------------------- +%% Function: end_per_group(GroupName, Config0) -> +%% void() | {save_config,Config1} +%% GroupName = atom() +%% Config0 = Config1 = [tuple()] +%%-------------------------------------------------------------------- +end_per_group(_GroupName, _Config) -> + ok. + +%%-------------------------------------------------------------------- +%% Function: init_per_testcase(TestCase, Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% TestCase = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%%-------------------------------------------------------------------- +init_per_testcase(TC, Config) -> + Config1 = [{init_per_testcase,TC} | Config], + ets:insert(?MODULE, {config,Config}), + %% ct:pal("Config after init_per_testcase(~w) = ~p", [TC,Config1]), + Config1. + +%%-------------------------------------------------------------------- +%% Function: end_per_testcase(TestCase, Config0) -> +%% void() | {save_config,Config1} +%% TestCase = atom() +%% Config0 = Config1 = [tuple()] +%%-------------------------------------------------------------------- +end_per_testcase(TC, Config) -> + ct:pal("Config in end_per_testcase(~w) = ~p", [TC,Config]), + [{_,MemConfig}] = ets:lookup(?MODULE, config), + diff_config(Config, MemConfig, [tc_status]), + ?MODULE = proplists:get_value(init_per_suite, Config), + TC = proplists:get_value(init_per_testcase, Config), + case ?config(tc_group_properties, Config) of + undefined -> + ok; + Props -> + GName = proplists:get_value(name, Props), + GName = proplists:get_value(init_per_group, Config) + end, + ok. + +%%-------------------------------------------------------------------- +%% Function: groups() -> [Group] +%% Group = {GroupName,Properties,GroupsAndTestCases} +%% GroupName = atom() +%% Properties = [parallel | sequence | Shuffle | {RepeatType,N}] +%% GroupsAndTestCases = [Group | {group,GroupName} | TestCase] +%% TestCase = atom() +%% Shuffle = shuffle | {shuffle,{integer(),integer(),integer()}} +%% RepeatType = repeat | repeat_until_all_ok | repeat_until_all_fail | +%% repeat_until_any_ok | repeat_until_any_fail +%% N = integer() | forever +%%-------------------------------------------------------------------- +groups() -> + [{g1,[],[to_tc, exit_tc]}]. + +%%-------------------------------------------------------------------- +%% Function: all() -> GroupsAndTestCases | {skip,Reason} +%% GroupsAndTestCases = [{group,GroupName} | TestCase] +%% GroupName = atom() +%% TestCase = atom() +%% Reason = term() +%%-------------------------------------------------------------------- +all() -> + [to_tc, exit_tc, + {group,g1}]. + + +to_tc(Config) -> + %% ct:pal("Config for to_tc = ~p", [Config]), + [{_,MemConfig}] = ets:lookup(?MODULE, config), + diff_config(Config, MemConfig, []), + ct:sleep(2000). + +exit_tc(Config) -> + %% ct:pal("Config for exit_tc = ~p", [Config]), + [{_,MemConfig}] = ets:lookup(?MODULE, config), + diff_config(Config, MemConfig, []), + ct:fail("Goodbye!"). + + +%%%----------------------------------------------------------------- +%%% HELP FUNCTIONS + +diff_config(Cfg1, Cfg2, DiffKeys) -> + diff_config(Cfg1, Cfg2, DiffKeys, []). + +diff_config([{K,V} | Cfg1], Cfg2, DiffKeys, RemKeys) -> + case proplists:get_value(K, Cfg2) of + undefined -> + diff_config(Cfg1, Cfg2, proplists:delete(K, DiffKeys), RemKeys); + V -> + diff_config(Cfg1, proplists:delete(K, Cfg2), DiffKeys, RemKeys); + _Other -> + case proplists:is_defined(K, DiffKeys) of + true -> + diff_config(Cfg1, Cfg2, proplists:delete(K, DiffKeys), RemKeys); + false -> + diff_config(Cfg1, Cfg2, DiffKeys, [K | RemKeys]) + end + end; +diff_config([], [], [], []) -> + ct:pal("Diff ok!", []), + ok; +diff_config([], Cfg2, DiffKeys, RemKeys) -> + Result = {diff_failed, {cfg2,Cfg2}, {diffkeys,DiffKeys}, {remkeys,RemKeys}}, + ct:pal("Diff failed! Result = ~p", [Result]), + exit(Result). + diff --git a/lib/common_test/test/ct_error_SUITE_data/error/test/verify_config.erl b/lib/common_test/test/ct_error_SUITE_data/error/test/verify_config.erl new file mode 100644 index 0000000000..3a9ba75e12 --- /dev/null +++ b/lib/common_test/test/ct_error_SUITE_data/error/test/verify_config.erl @@ -0,0 +1,284 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2010-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%%% @doc Common Test Example Suite Callback module. +%%% +%%%

This module gives an example of a common test CTH (Common Test Hook). +%%% There are many ways to add a CTH to a test run, you can do it either in +%%% the command line using -ct_hook, in a test spec using +%%% {ct_hook,M} or in the suite it self by returning ct_hook +%%% from either suite/0, init_per_suite/1, init_per_group/2 and +%%% init_per_testcase/2. The scope of the CTH is determined by where is it +%%% started. If it is started in the command line or test spec then it will +%%% be stopped at the end of all tests. If it is started in init_per_suite, +%%% it will be stopped after end_per_suite and so on. See terminate +%%% documentation for a table describing the scoping machanics. +%%% +%%% All of callbacks except init/1 in a CTH are optional.

+ +-module(verify_config). + +%% CT Hooks +-export([id/1]). +-export([init/2]). + +-export([pre_init_per_suite/3]). +-export([post_init_per_suite/4]). +-export([pre_end_per_suite/3]). +-export([post_end_per_suite/4]). + +-export([pre_init_per_group/3]). +-export([post_init_per_group/4]). +-export([pre_end_per_group/3]). +-export([post_end_per_group/4]). + +-export([pre_init_per_testcase/3]). +-export([post_end_per_testcase/4]). + +-export([on_tc_fail/3]). +-export([on_tc_skip/3]). + +-export([terminate/1]). + +-include_lib("common_test/src/ct_util.hrl"). +-include_lib("common_test/include/ct_event.hrl"). + +-type config() :: proplists:proplist(). +-type reason() :: term(). +-type skip_or_fail() :: {skip, reason()} | + {auto_skip, reason()} | + {fail, reason()} | + {'EXIT',reason()}. + +-record(state, { id = ?MODULE :: term()}). + +%% @doc Always called before any other callback function. Use this to initiate +%% any common state. It should return an state for this CTH. +-spec init(Id :: term(), Opts :: proplists:proplist()) -> + {ok, State :: #state{}}. +init(Id, Opts) -> + gen_event:notify(?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, init, [Id, Opts]}}), + {ok,Opts}. + +%% @doc The ID is used to uniquly identify an CTH instance, if two CTH's +%% return the same ID the seconds CTH is ignored. This function should NOT +%% have any side effects as it might be called multiple times by common test. +-spec id(Opts :: proplists:proplist()) -> + Id :: term(). +id(Opts) -> + gen_event:notify(?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, id, [Opts]}}), + now(). + +%% @doc Called before init_per_suite is called. Note that this callback is +%% only called if the CTH is added before init_per_suite is run (eg. in a test +%% specification, suite/0 function etc). +%% You can change the config in the this function. +-spec pre_init_per_suite(Suite :: atom(), + Config :: config(), + State :: #state{}) -> + {config() | skip_or_fail(), NewState :: #state{}}. +pre_init_per_suite(Suite,Config,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, pre_init_per_suite, + [Suite,Config,State]}}), + {Config, State}. + +%% @doc Called after init_per_suite. +%% you can change the return value in this function. +-spec post_init_per_suite(Suite :: atom(), + Config :: config(), + Return :: config() | skip_or_fail(), + State :: #state{}) -> + {config() | skip_or_fail(), NewState :: #state{}}. +post_init_per_suite(Suite,Config,Return,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, post_init_per_suite, + [Suite,Config,Return,State]}}), + {Return, State}. + +%% @doc Called before end_per_suite. The config/state can be changed here, +%% though it will only affect the *end_per_suite function. +-spec pre_end_per_suite(Suite :: atom(), + Config :: config() | skip_or_fail(), + State :: #state{}) -> + {ok | skip_or_fail(), NewState :: #state{}}. +pre_end_per_suite(Suite,Config,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, pre_end_per_suite, + [Suite,Config,State]}}), + {Config, State}. + +%% @doc Called after end_per_suite. Note that the config cannot be +%% changed here, only the status of the suite. +-spec post_end_per_suite(Suite :: atom(), + Config :: config(), + Return :: term(), + State :: #state{}) -> + {ok | skip_or_fail(), NewState :: #state{}}. +post_end_per_suite(Suite,Config,Return,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, post_end_per_suite, + [Suite,Config,Return,State]}}), + {Return, State}. + +%% @doc Called before each init_per_group. +%% You can change the config in this function. +-spec pre_init_per_group(Group :: atom(), + Config :: config(), + State :: #state{}) -> + {config() | skip_or_fail(), NewState :: #state{}}. +pre_init_per_group(Group,Config,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, pre_init_per_group, + [Group,Config,State]}}), + {Config, State}. + +%% @doc Called after each init_per_group. +%% You can change the return value in this function. +-spec post_init_per_group(Group :: atom(), + Config :: config(), + Return :: config() | skip_or_fail(), + State :: #state{}) -> + {config() | skip_or_fail(), NewState :: #state{}}. +post_init_per_group(Group,Config,Return,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, post_init_per_group, + [Group,Config,Return,State]}}), + {Return, State}. + +%% @doc Called after each end_per_group. The config/state can be changed here, +%% though it will only affect the *end_per_group functions. +-spec pre_end_per_group(Group :: atom(), + Config :: config() | skip_or_fail(), + State :: #state{}) -> + {ok | skip_or_fail(), NewState :: #state{}}. +pre_end_per_group(Group,Config,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, pre_end_per_group, + [Group,Config,State]}}), + {Config, State}. + +%% @doc Called after each end_per_group. Note that the config cannot be +%% changed here, only the status of the group. +-spec post_end_per_group(Group :: atom(), + Config :: config(), + Return :: term(), + State :: #state{}) -> + {ok | skip_or_fail(), NewState :: #state{}}. +post_end_per_group(Group,Config,Return,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, post_end_per_group, + [Group,Config,Return,State]}}), + {Return, State}. + +%% @doc Called before each test case. +%% You can change the config in this function. +-spec pre_init_per_testcase(TC :: atom(), + Config :: config(), + State :: #state{}) -> + {config() | skip_or_fail(), NewState :: #state{}}. +pre_init_per_testcase(TC,Config,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, pre_init_per_testcase, + [TC,Config,State]}}), + {Config, State}. + +%% @doc Called after each test case. Note that the config cannot be +%% changed here, only the status of the test case. +-spec post_end_per_testcase(TC :: atom(), + Config :: config(), + Return :: term(), + State :: #state{}) -> + {ok | skip_or_fail(), NewState :: #state{}}. +post_end_per_testcase(TC,Config,Return,State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, post_end_per_testcase, + [TC,Config,Return,State]}}), + + %% check that config has been restored + ct:pal("Config in verify_config:post_end_per_testcase(~w) = ~p", + [TC,Config]), + [{_,MemConfig}] = ets:lookup(config_restored_SUITE, config), + config_restored_SUITE:diff_config(Config, MemConfig, [tc_status]), + + {Return, State}. + +%% @doc Called after post_init_per_suite, post_end_per_suite, post_init_per_group, +%% post_end_per_group and post_end_per_tc if the suite, group or test case failed. +%% This function should be used for extra cleanup which might be needed. +%% It is not possible to modify the config or the status of the test run. +-spec on_tc_fail(TC :: init_per_suite | end_per_suite | + init_per_group | end_per_group | atom(), + Reason :: term(), State :: #state{}) -> + NewState :: #state{}. +on_tc_fail(TC, Reason, State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, on_tc_fail, + [TC,Reason,State]}}), + State. + +%% @doc Called when a test case is skipped by either user action +%% or due to an init function failing. Test case can be +%% end_per_suite, init_per_group, end_per_group and the actual test cases. +-spec on_tc_skip(TC :: end_per_suite | + init_per_group | end_per_group | atom(), + {tc_auto_skip, {failed, {Mod :: atom(), Function :: atom(), Reason :: term()}}} | + {tc_user_skip, {skipped, Reason :: term()}}, + State :: #state{}) -> + NewState :: #state{}. +on_tc_skip(TC, Reason, State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, on_tc_skip, + [TC,Reason,State]}}), + State. + +%% @doc Called when the scope of the CTH is done, this depends on +%% when the CTH was specified. This translation table describes when this +%% function is called. +%% +%% | Started in | terminate called | +%% |---------------------|-------------------------| +%% | command_line | after all tests are run | +%% | test spec | after all tests are run | +%% | suite/0 | after SUITE is done | +%% | init_per_suite/1 | after SUITE is done | +%% | init_per_group/2 | after group is done | +%% |-----------------------------------------------| +%% +-spec terminate(State :: #state{}) -> + term(). +terminate(State) -> + gen_event:notify( + ?CT_EVMGR_REF, #event{ name = cth, node = node(), + data = {?MODULE, terminate, [State]}}), + ok. -- cgit v1.2.3