From e05868f49b442c10cedbded390c110473cda6f00 Mon Sep 17 00:00:00 2001 From: Anders Svensson Date: Mon, 8 Aug 2011 18:24:36 +0200 Subject: Add transport and gen_sctp suites --- lib/diameter/test/diameter_transport_SUITE.erl | 454 +++++++++++++++++++++++++ 1 file changed, 454 insertions(+) create mode 100644 lib/diameter/test/diameter_transport_SUITE.erl (limited to 'lib/diameter/test/diameter_transport_SUITE.erl') diff --git a/lib/diameter/test/diameter_transport_SUITE.erl b/lib/diameter/test/diameter_transport_SUITE.erl new file mode 100644 index 0000000000..6de6d6bad3 --- /dev/null +++ b/lib/diameter/test/diameter_transport_SUITE.erl @@ -0,0 +1,454 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%% +%% Tests of diameter_tcp/sctp as implementations of the diameter +%% transport interface. See also the sctp suite for some gen_sctp +%% related issues. +%% + +-module(diameter_transport_SUITE). + +-export([suite/0, + all/0, + init_per_suite/1, + end_per_suite/1]). + +%% testcases +-export([scramble/1, + tcp_accept/1, + tcp_connect/1, + sctp_accept/1, + sctp_connect/1]). + +-export([accept/1, + connect/1, + init/2]). + +-include_lib("kernel/include/inet_sctp.hrl"). +-include_lib("diameter/include/diameter.hrl"). +-include("diameter_ct.hrl"). + +-define(util, diameter_util). + +%% Corresponding to diameter_* transport modules. +-define(TRANSPORTS, [tcp, sctp]). + +%% Receive a message. +-define(RECV(Pat, Ret), receive Pat -> Ret end). +-define(RECV(Pat), ?RECV(Pat, now())). + +%% Or not. +-define(WAIT(Ms), receive after Ms -> now() end). + +%% Sockets are opened on the loopback address. +-define(ADDR, {127,0,0,1}). + +%% diameter_tcp doesn't use anything but host_ip_address, and that +%% only is a local address isn't configured as at transport start. +-define(SVC(Addrs), #diameter_service{capabilities + = #diameter_caps{host_ip_address + = Addrs}}). + +%% The term diameter_tcp/sctp registers after opening a listening +%% socket. This is an implementation detail that should probably be +%% replaced by some documented way of getting at the port number of +%% the listening socket, which is what we're after since we specify +%% port 0 to get something unused. +-define(TCP_LISTENER(Ref, Addr, LSock), + {diameter_tcp, listener, {Ref, {Addr, LSock}}}). +-define(SCTP_LISTENER(Ref, Addr, LSock), + {diameter_sctp, listener, {Ref, {[Addr], LSock}}}). + +%% The term we register after open a listening port with gen_tcp. +-define(TEST_LISTENER(Ref, PortNr), + {?MODULE, listen, Ref, PortNr}). + +%% Message over the transport interface. +-define(TMSG(T), {diameter, T}). + +%% Options for gen_tcp/gen_sctp. +-define(TCP_OPTS, [binary, {active, true}, {packet, 0}]). +-define(SCTP_OPTS, [binary, {active, true}, {sctp_initmsg, ?SCTP_INIT}]). + +%% Request a specific number of streams just because we can. +-define(SCTP_INIT, #sctp_initmsg{num_ostreams = 5, + max_instreams = 5}). + +%% Messages from gen_sctp. +-define(SCTP(Sock, Data), {sctp, Sock, _, _, Data}). + +%% =========================================================================== + +suite() -> + [{timetrap, {minutes, 2}}]. + +all() -> + [scramble | tc()]. + +tc() -> + [tcp_accept, + tcp_connect, + sctp_accept, + sctp_connect]. + +init_per_suite(Config) -> + ok = diameter:start(), + [{sctp, have_sctp()} | Config]. + +end_per_suite(_Config) -> + ok = diameter:stop(). + +%% =========================================================================== +%% scramble/1 + +scramble(Config) -> + [] = ?util:run(?util:scramble([{?MODULE, [F, Config]} || F <- tc()])). + +%% =========================================================================== +%% tcp_accept/1 +%% sctp_accept/1 +%% +%% diameter transport accepting, test code connecting. + +tcp_accept(_) -> + accept(tcp). + +sctp_accept(Config) -> + if_sctp(fun accept/1, Config). + +%% Start multiple accepting transport processes that are connected to +%% with an equal number of connecting processes using gen_tcp/sctp +%% directly. + +-define(PEER_COUNT, 8). + +accept(Prot) -> + T = {Prot, make_ref()}, + [] = ?util:run(?util:scramble(acc(2*?PEER_COUNT, T, []))). + +acc(0, _, Acc) -> + Acc; +acc(N, T, Acc) -> + acc(N-1, T, [{?MODULE, [init, + element(1 + N rem 2, {accept, gen_connect}), + T]} + | Acc]). + +%% =========================================================================== +%% tcp_connect/1 +%% sctp_connect/1 +%% +%% Test code accepting, diameter transport connecting. + +tcp_connect(_) -> + connect(tcp). + +sctp_connect(Config) -> + if_sctp(fun connect/1, Config). + +connect(Prot) -> + T = {Prot, make_ref()}, + [] = ?util:run([{?MODULE, [init, X, T]} || X <- [gen_accept, connect]]). + +%% =========================================================================== +%% =========================================================================== + +%% have_sctp/0 + +have_sctp() -> + try gen_sctp:open() of + {ok, Sock} -> + gen_sctp:close(Sock), + true + catch + error: badarg -> + false + end. + +%% if_sctp/2 + +if_sctp(F, Config) -> + case proplists:get_value(sctp, Config) of + true -> + F(sctp); + false -> + {skip, no_sctp} + end. + +%% init/2 + +init(accept, {Prot, Ref}) -> + %% Start an accepting transport and receive notification of a + %% connection. + TPid = start_accept(Prot, Ref), + + %% Receive a message and send it back. + <<_:8, Len:24, _/binary>> = Bin = bin(Prot, ?RECV(?TMSG({recv, P}), P)), + + Len = size(Bin), + TPid ! ?TMSG({send, Bin}), + + %% Expect the transport process to die as a result of the peer + %% closing the connection. + MRef = erlang:monitor(process, TPid), + ?RECV({'DOWN', MRef, process, _, _}); + +init(gen_connect, {Prot, Ref}) -> + %% Lookup the peer's listening socket. + {ok, PortNr} = inet:port(lsock(Prot, Ref)), + + %% Connect, send a message and receive it back. + {ok, Sock} = gen_connect(Prot, PortNr, Ref), + Bin = make_msg(), + ok = gen_send(Prot, Sock, Bin), + Bin = gen_recv(Prot, Sock); + +init(gen_accept, {Prot, Ref}) -> + %% Open a listening socket and publish the port number. + {ok, LSock} = gen_listen(Prot), + {ok, PortNr} = inet:port(LSock), + true = diameter_reg:add_new(?TEST_LISTENER(Ref, PortNr)), + + %% Accept a connection, receive a message and send it back. + {ok, Sock} = gen_accept(Prot, LSock), + Bin = gen_recv(Prot, Sock), + ok = gen_send(Prot, Sock, Bin); + +init(connect, {Prot, Ref}) -> + %% Lookup the peer's listening socket. + [{?TEST_LISTENER(_, PortNr), _}] = match(?TEST_LISTENER(Ref, '_')), + + %% Start a connecting transport and receive notification of + %% the connection. + TPid = start_connect(Prot, PortNr, Ref), + + %% Send a message and receive it back. + Bin = make_msg(), + TPid ! ?TMSG({send, Bin}), + Bin = bin(Prot, ?RECV(?TMSG({recv, P}), P)), + + %% Expect the transport process to die as a result of the peer + %% closing the connection. + MRef = erlang:monitor(process, TPid), + ?RECV({'DOWN', MRef, process, _, _}). + +lsock(sctp, Ref) -> + [{?SCTP_LISTENER(_ , _, LSock), _}] + = match(?SCTP_LISTENER(Ref, ?ADDR, '_')), + LSock; +lsock(tcp, Ref) -> + [{?TCP_LISTENER(_ , _, LSock), _}] + = match(?TCP_LISTENER(Ref, ?ADDR, '_')), + LSock. + +match(Pat) -> + case diameter_reg:match(Pat) of + [] -> + ?WAIT(50), + match(Pat); + L -> + L + end. + +bin(sctp, #diameter_packet{bin = Bin}) -> + Bin; +bin(tcp, Bin) -> + Bin. + +%% make_msg/0 +%% +%% A valid Diameter message in as far as diameter_tcp examines it, +%% the module examining the length in the Diameter header to locate +%% message boundaries. + +make_msg() -> + N = 1024, + Bin = rand_bytes(4*N), + Len = 4*(N+1), + <<1:8, Len:24, Bin/binary>>. + +%% crypto:rand_bytes/1 isn't available on all platforms (since openssl +%% isn't) so roll our own. +rand_bytes(N) -> + random:seed(now()), + rand_bytes(N, <<>>). + +rand_bytes(0, Bin) -> + Bin; +rand_bytes(N, Bin) -> + Oct = random:uniform(256) - 1, + rand_bytes(N-1, <>). + +%% =========================================================================== + +%% start_connect/3 + +start_connect(Prot, PortNr, Ref) -> + {ok, TPid, [?ADDR]} = start_connect(Prot, + {connect, Ref}, + ?SVC([]), + [{raddr, ?ADDR}, + {rport, PortNr}, + {ip, ?ADDR}, + {port, 0}]), + ?RECV(?TMSG({TPid, connected, _})), + TPid. + +start_connect(sctp, T, Svc, Opts) -> + diameter_sctp:start(T, Svc, [{sctp_initmsg, ?SCTP_INIT} | Opts]); +start_connect(tcp, T, Svc, Opts) -> + diameter_tcp:start(T, Svc, Opts). + +%% start_accept/2 +%% +%% Start transports sequentially by having each wait for a message +%% from a job in a queue before commencing. Only one transport with +%% a pending accept is started at a time since diameter_sctp currently +%% assumes (and diameter currently implements) this. + +start_accept(Prot, Ref) -> + Pid = sync(accept, Ref), + + %% Configure the same port number for transports on the same + %% reference. + PortNr = portnr(Prot, Ref), + {Mod, Opts} = tmod(Prot), + + try + {ok, TPid, [?ADDR]} = Mod:start({accept, Ref}, + ?SVC([?ADDR]), + [{port, PortNr} | Opts]), + ?RECV(?TMSG({TPid, connected})), + TPid + after + Pid ! Ref + end. + +sync(What, Ref) -> + ok = diameter_sync:cast({?MODULE, What, Ref}, + [fun lock/2, Ref, self()], + infinity, + infinity), + receive {start, Ref, Pid} -> Pid end. + +lock(Ref, Pid) -> + Pid ! {start, Ref, self()}, + erlang:monitor(process, Pid), + Ref = receive T -> T end. + +tmod(sctp) -> + {diameter_sctp, [{sctp_initmsg, ?SCTP_INIT}]}; +tmod(tcp) -> + {diameter_tcp, []}. + +portnr(sctp, Ref) -> + case diameter_reg:match(?SCTP_LISTENER(Ref, ?ADDR, '_')) of + [{?SCTP_LISTENER(_, _, LSock), _}] -> + {ok, N} = inet:port(LSock), + N; + [] -> + 0 + end; +portnr(tcp, Ref) -> + case diameter_reg:match(?TCP_LISTENER(Ref, ?ADDR, '_')) of + [{?TCP_LISTENER(_, _, LSock), _}] -> + {ok, N} = inet:port(LSock), + N; + [] -> + 0 + end. + +%% =========================================================================== + +%% gen_connect/3 + +gen_connect(Prot, PortNr, Ref) -> + Pid = sync(connect, Ref), + + %% Stagger connect attempts to avoid the situation that no + %% transport process is accepting yet. + receive after 250 -> ok end, + + try + gen_connect(Prot, PortNr) + after + Pid ! Ref + end. + +gen_connect(sctp = P, PortNr) -> + {ok, Sock} = Ok = gen_sctp:open([{ip, ?ADDR}, {port, 0} | ?SCTP_OPTS]), + ok = gen_sctp:connect_init(Sock, ?ADDR, PortNr, []), + Ok = gen_accept(P, Sock); +gen_connect(tcp, PortNr) -> + gen_tcp:connect(?ADDR, PortNr, ?TCP_OPTS). + +%% gen_listen/1 + +gen_listen(sctp) -> + {ok, Sock} = gen_sctp:open([{ip, ?ADDR}, {port, 0} | ?SCTP_OPTS]), + {gen_sctp:listen(Sock, true), Sock}; +gen_listen(tcp) -> + gen_tcp:listen(0, [{ip, ?ADDR} | ?TCP_OPTS]). + +%% gen_accept/2 + +gen_accept(sctp, Sock) -> + Assoc = ?RECV(?SCTP(Sock, {_, #sctp_assoc_change{state = comm_up, + outbound_streams = O, + inbound_streams = I, + assoc_id = A}}), + {O, I, A}), + putr(assoc, Assoc), + {ok, Sock}; +gen_accept(tcp, LSock) -> + gen_tcp:accept(LSock). + +%% gen_send/3 + +gen_send(sctp, Sock, Bin) -> + {OS, _IS, Id} = getr(assoc), + {_, _, Us} = now(), + gen_sctp:send(Sock, Id, Us rem OS, Bin); +gen_send(tcp, Sock, Bin) -> + gen_tcp:send(Sock, Bin). + +%% gen_recv/2 + +gen_recv(sctp, Sock) -> + {_OS, _IS, Id} = getr(assoc), + ?RECV(?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], Bin}), Bin); +gen_recv(tcp, Sock) -> + tcp_recv(Sock, <<>>). + +tcp_recv(_, <<_:8, Len:24, _/binary>> = Bin) + when Len =< size(Bin) -> + Bin; +tcp_recv(Sock, B) -> + receive {tcp, Sock, Bin} -> tcp_recv(Sock, <>) end. + +%% putr/2 + +putr(Key, Val) -> + put({?MODULE, Key}, Val). + +%% getr/1 + +getr(Key) -> + get({?MODULE, Key}). -- cgit v1.2.3