From 8998476269bf308e92b004f00e5ae3636f08541e Mon Sep 17 00:00:00 2001 From: Anders Svensson Date: Mon, 3 Oct 2011 00:56:18 +0200 Subject: Add tls testsuite --- lib/diameter/test/diameter_tls_SUITE.erl | 347 +++++++++++++++++++++ .../test/diameter_tls_SUITE_data/Makefile.ca | 43 +++ lib/diameter/test/modules.mk | 3 +- 3 files changed, 392 insertions(+), 1 deletion(-) create mode 100644 lib/diameter/test/diameter_tls_SUITE.erl create mode 100644 lib/diameter/test/diameter_tls_SUITE_data/Makefile.ca (limited to 'lib/diameter/test') diff --git a/lib/diameter/test/diameter_tls_SUITE.erl b/lib/diameter/test/diameter_tls_SUITE.erl new file mode 100644 index 0000000000..466f7af138 --- /dev/null +++ b/lib/diameter/test/diameter_tls_SUITE.erl @@ -0,0 +1,347 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%% +%% Tests of traffic between four Diameter nodes connected as follows. +%% +%% ---- SERVER.REALM1 +%% / +%% CLIENT.REALM0 ----- SERVER.REALM2 +%% \ +%% ---- SERVER.REALM3 +%% +%% The first two connections are established over TLS, the third not. +%% + +-module(diameter_tls_SUITE). + +-export([suite/0, + all/0, + groups/0, + init_per_group/2, + end_per_group/2, + init_per_suite/1, + end_per_suite/1]). + +%% testcases +-export([send1/1, + send2/1, + send3/1, + remove_transports/1, + stop_services/1]). + +%% diameter callbacks +-export([peer_up/3, + peer_down/3, + pick_peer/4, + prepare_request/3, + prepare_retransmit/3, + handle_answer/4, + handle_error/4, + handle_request/3]). + +-ifdef(DIAMETER_CT). +-include("diameter_gen_base_rfc3588.hrl"). +-else. +-include_lib("diameter/include/diameter_gen_base_rfc3588.hrl"). +-endif. + +-include_lib("diameter/include/diameter.hrl"). +-include("diameter_ct.hrl"). + +%% =========================================================================== + +-define(ADDR, {127,0,0,1}). + +-define(CLIENT, "CLIENT.REALM0"). +-define(SERVER1, "SERVER.REALM1"). +-define(SERVER2, "SERVER.REALM2"). +-define(SERVER3, "SERVER.REALM3"). + +-define(DICT_COMMON, ?DIAMETER_DICT_COMMON). + +-define(APP_ALIAS, the_app). +-define(APP_ID, ?DICT_COMMON:id()). + +-define(NO_INBAND_SECURITY, 0). +-define(TLS, 1). + +%% Config for diameter:start_service/2. +-define(SERVICE(Host, Dict), + [{'Origin-Host', Host}, + {'Origin-Realm', realm(Host)}, + {'Host-IP-Address', [?ADDR]}, + {'Vendor-Id', 12345}, + {'Product-Name', "OTP/diameter"}, + {'Inband-Security-Id', [?NO_INBAND_SECURITY]}, + {'Auth-Application-Id', [Dict:id()]}, + {application, [{alias, ?APP_ALIAS}, + {dictionary, Dict}, + {module, ?MODULE}, + {answer_errors, callback}]}]). + +%% Config for diameter:add_transport/2. In the listening case, listen +%% on a free port that we then lookup using the implementation detail +%% that diameter_tcp registers the port with diameter_reg. +-define(CONNECT(PortNr, Caps, Opts), + {connect, [{transport_module, diameter_tcp}, + {transport_config, [{raddr, ?ADDR}, + {rport, PortNr}, + {ip, ?ADDR}, + {port, 0} + | Opts]}, + {capabilities, Caps}]}). +-define(LISTEN(Caps, Opts), + {listen, [{transport_module, diameter_tcp}, + {transport_config, [{ip, ?ADDR}, {port, 0} | Opts]}, + {capabilities, Caps}]}). + +-define(SUCCESS, 2001). + +-define(LOGOUT, ?'DIAMETER_BASE_TERMINATION-CAUSE_DIAMETER_LOGOUT'). + +%% =========================================================================== + +suite() -> + [{timetrap, {seconds, 10}}]. + +all() -> + [{group, N} || {N, _, _} <- groups()] + ++ [remove_transports, stop_services]. + +groups() -> + Ts = tc(), + [{all, [], Ts}, + {p, [parallel], Ts}]. + +init_per_group(_, Config) -> + Config. + +end_per_group(_, _) -> + ok. + +init_per_suite(Config) -> + ok = ssl:start(), + ok = diameter:start(), + + Dir = proplists:get_value(priv_dir, Config), + Servers = [server(?SERVER1, + inband_security([?TLS]), + ssl_options(Dir, "server1")), + server(?SERVER2, + inband_security([?NO_INBAND_SECURITY, ?TLS]), + ssl_options(Dir, "server2")), + server(?SERVER3, + [], + [])], + + ok = diameter:start_service(?CLIENT, ?SERVICE(?CLIENT, ?DICT_COMMON)), + + true = diameter:subscribe(?CLIENT), + + Connections = connect(?CLIENT, + Servers, + inband_security([?NO_INBAND_SECURITY, ?TLS]), + ssl_options(Dir, "client")), + + [{transports, lists:zip(Servers, Connections)} | Config]. + +end_per_suite(_Config) -> + ok = diameter:stop(), + ok = ssl:stop(). + +%% Testcases to run when services are started and connections +%% established. These are trivial, the interesting stuff is setting up +%% the connections in init_per_suite/2. +tc() -> + [send1, + send2, + send3]. + +%% =========================================================================== + +inband_security(Ids) -> + [{'Inband-Security-Id', Ids}]. + +ssl_options(Dir, Base) -> + {Key, Cert} = make_cert(Dir, Base ++ "_key.pem", Base ++ "_ca.pem"), + [{ssl_options, [{certfile, Cert}, {keyfile, Key}]}]. + +server(Host, Caps, Opts) -> + ok = diameter:start_service(Host, ?SERVICE(Host, ?DICT_COMMON)), + {ok, LRef} = diameter:add_transport(Host, ?LISTEN(Caps, Opts)), + {LRef, portnr(LRef)}. + +connect(Host, {_LRef, PortNr}, Caps, Opts) -> + {ok, Ref} = diameter:add_transport(Host, ?CONNECT(PortNr, Caps, Opts)), + ok = receive + #diameter_event{service = Host, + info = {up, Ref, _, _, #diameter_packet{}}} -> + ok + after 2000 -> + false + end, + Ref; +connect(Host, Ports, Caps, Opts) -> + [connect(Host, P, Caps, Opts) || P <- Ports]. + +portnr(LRef) -> + portnr(LRef, 20). + +portnr(LRef, N) + when 0 < N -> + case diameter_reg:match({diameter_tcp, listener, {LRef, '_'}}) of + [{T, _Pid}] -> + {_, _, {LRef, {_Addr, LSock}}} = T, + {ok, PortNr} = inet:port(LSock), + PortNr; + [] -> + receive after 50 -> ok end, + portnr(LRef, N-1) + end. + +realm(Host) -> + tl(lists:dropwhile(fun(C) -> C /= $. end, Host)). + +make_cert(Dir, Keyfile, Certfile) -> + [K,C] = Paths = [filename:join([Dir, F]) || F <- [Keyfile, Certfile]], + + KCmd = join(["openssl genrsa -out", K, "2048"]), + CCmd = join(["openssl req -new -x509 -key", K, "-out", C, "-days 7", + "-subj /C=SE/ST=./L=Stockholm/CN=www.erlang.org"]), + + %% Hope for the best and only check that files are written. + os:cmd(KCmd), + os:cmd(CCmd), + + [_,_] = [T || P <- Paths, {ok, T} <- [file:read_file_info(P)]], + + {K,C}. + +join(Strs) -> + string:join(Strs, " "). + +%% =========================================================================== + +%% Send an STR intended for a specific server and expect success. +send1(_Config) -> + call(?SERVER1). +send2(_Config) -> + call(?SERVER2). +send3(_Config) -> + call(?SERVER3). + +%% Remove the client transports and expect the corresponding server +%% transport to go down. +remove_transports(Config) -> + Ts = proplists:get_value(transports, Config), + + true = diameter:subscribe(?SERVER1), + true = diameter:subscribe(?SERVER2), + true = diameter:subscribe(?SERVER3), + + lists:map(fun disconnect/1, Ts). + +disconnect({{LRef, _PortNr}, CRef}) -> + ok = diameter:remove_transport(?CLIENT, CRef), + ok = receive #diameter_event{info = {down, LRef, _, _}} -> ok + after 2000 -> false + end. + +stop_services(_Config) -> + S = [?CLIENT, ?SERVER1, ?SERVER2, ?SERVER3], + Ok = [ok || _ <- S], + Ok = [diameter:stop_service(H) || H <- S]. + +%% =========================================================================== + +call(Server) -> + Realm = realm(Server), + Req = ['STR', {'Destination-Realm', Realm}, + {'Termination-Cause', ?LOGOUT}, + {'Auth-Application-Id', ?APP_ID}], + #diameter_base_STA{'Result-Code' = ?SUCCESS, + 'Origin-Host' = Server, + 'Origin-Realm' = Realm} + = call(Req, [{filter, realm}]). + +call(Req, Opts) -> + diameter:call(?CLIENT, ?APP_ALIAS, Req, Opts). + +set([H|T], Vs) -> + [H | Vs ++ T]. + +%% =========================================================================== +%% diameter callbacks + +%% peer_up/3 + +peer_up(_SvcName, _Peer, State) -> + State. + +%% peer_down/3 + +peer_down(_SvcName, _Peer, State) -> + State. + +%% pick_peer/4 + +pick_peer([Peer], _, ?CLIENT, _State) -> + {ok, Peer}. + +%% prepare_request/3 + +prepare_request(#diameter_packet{msg = Req}, + ?CLIENT, + {_Ref, Caps}) -> + #diameter_caps{origin_host = {OH, _}, + origin_realm = {OR, _}} + = Caps, + + {send, set(Req, [{'Session-Id', diameter:session_id(OH)}, + {'Origin-Host', OH}, + {'Origin-Realm', OR}])}. + +%% prepare_retransmit/3 + +prepare_retransmit(_Pkt, false, _Peer) -> + discard. + +%% handle_answer/4 + +handle_answer(Pkt, _Req, ?CLIENT, _Peer) -> + #diameter_packet{msg = Rec, errors = []} = Pkt, + Rec. + +%% handle_error/4 + +handle_error(Reason, _Req, ?CLIENT, _Peer) -> + {error, Reason}. + +%% handle_request/3 + +handle_request(#diameter_packet{msg = #diameter_base_STR{'Session-Id' = SId}}, + OH, + {_Ref, #diameter_caps{origin_host = {OH,_}, + origin_realm = {OR, _}}}) + when OH /= ?CLIENT -> + {reply, #diameter_base_STA{'Result-Code' = ?SUCCESS, + 'Session-Id' = SId, + 'Origin-Host' = OH, + 'Origin-Realm' = OR}}. diff --git a/lib/diameter/test/diameter_tls_SUITE_data/Makefile.ca b/lib/diameter/test/diameter_tls_SUITE_data/Makefile.ca new file mode 100644 index 0000000000..3f2645add0 --- /dev/null +++ b/lib/diameter/test/diameter_tls_SUITE_data/Makefile.ca @@ -0,0 +1,43 @@ +# -*- makefile -*- +# %CopyrightBegin% +# +# Copyright Ericsson AB 2011. All Rights Reserved. +# +# The contents of this file are subject to the Erlang Public License, +# Version 1.1, (the "License"); you may not use this file except in +# compliance with the License. You should have received a copy of the +# Erlang Public License along with this software. If not, it can be +# retrieved online at http://www.erlang.org/. +# +# Software distributed under the License is distributed on an "AS IS" +# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +# the License for the specific language governing rights and limitations +# under the License. +# +# %CopyrightEnd% + +# +# Certificates are now generated from the suite itself but the +# makefile itself is still useful. +# + +KEYS = $(HOSTS:%=%_key.pem) +CERTS = $(HOSTS:%=%_ca.pem) + +all: $(CERTS) + +%_ca.pem: %_key.pem + openssl req -new -x509 -key $< -out $@ -days 1095 \ + -subj '/C=SE/ST=./L=Stockholm/CN=www.erlang.org' + +%_key.pem: + openssl genrsa -out $@ 2048 + +clean: + rm -f $(CERTS) + +realclean: clean + rm -f $(KEYS) + +.PRECIOUS: $(KEYS) +.PHONY: all clean realclean diff --git a/lib/diameter/test/modules.mk b/lib/diameter/test/modules.mk index c6f709dc36..7c691c302b 100644 --- a/lib/diameter/test/modules.mk +++ b/lib/diameter/test/modules.mk @@ -34,7 +34,8 @@ MODULES = \ diameter_watchdog_SUITE \ diameter_transport_SUITE \ diameter_traffic_SUITE \ - diameter_relay_SUITE + diameter_relay_SUITE \ + diameter_tls_SUITE INTERNAL_HRL_FILES = \ diameter_ct.hrl -- cgit v1.2.3