From 61b9efd8b4cf35dce44ec2fefd26339d2d20cb3c Mon Sep 17 00:00:00 2001 From: Anders Svensson Date: Tue, 12 Feb 2013 17:46:38 +0100 Subject: Be less brutal in setting Result-Code/Failed-AVP When receiving a request for which errors have been detected during decode, diameter previously used the errors list in the decoded diameter_packet record to unconditionally set Result-Code and Failed-AVP in the outgoing answer. It wasn't particularly delicate in doing so however and would happily set a 5xxx Result-Code even if a handle_request callback returned an answer-message, leading to an encode error. This behaviour became even less endearing as of commit ac452e28, which made it possible to handle_request to take place even for protocol errors. (ie. When a callback typically should return an answer-message.) This commit fixes the behaviour by only setting a value that's appropriate for the answer in question, either a 3xxx or a 5xxx, depending on if the answer's an answer-message or not. It also allows handle_request to prevent diameter from setting anything by setting errors = false in a returned diameter_packet. Ideally it should have been errors = [] but the empty list is the default value for the errors field and changing the default (ideally there shouldn't have been one) would require recompilation of all modules including diameter.hrl: choose the less attractive 'false' to avoid such backwards incompatibility. The request reception is also refactored somewhat to shorten some call chains. --- lib/diameter/doc/src/diameter_app.xml | 21 +- lib/diameter/src/base/diameter_traffic.erl | 426 +++++++++++++++-------------- 2 files changed, 231 insertions(+), 216 deletions(-) (limited to 'lib/diameter') diff --git a/lib/diameter/doc/src/diameter_app.xml b/lib/diameter/doc/src/diameter_app.xml index f4db625c71..5c23c9d683 100644 --- a/lib/diameter/doc/src/diameter_app.xml +++ b/lib/diameter/doc/src/diameter_app.xml @@ -13,7 +13,7 @@
-20112012 +20112013 Ericsson AB. All Rights Reserved. @@ -509,14 +509,15 @@ Otherwise it contains the record representing the request as outlined in &dict;.

-The errors field specifies any Result-Code's identifying errors -that were encountered in decoding the request. -In this case diameter will set both Result-Code and -Failed-AVP AVP's in a returned -answer &message; before sending it to the peer: -the returned &message; need only set any other required AVP's. -Note that the errors detected by diameter are all of the 5xxx series -(Permanent Failures). +The errors field specifies any results codes identifying errors +found while decoding the request. +This is used to set Result-Code and/or Failed-AVP in a returned +answer unless the callback returns a #diameter_packet{} +whose errors field is set to either a non-empty list of its +own, in which case this list is used instead, or the atom false +to disable any setting of Result-Code and Failed-AVP. +Note that the errors detected by diameter are of the 3xxx +and 5xxx series, Protocol Errors and Permanent Failures respectively. The errors list is empty if the request has been received in the relay application.

@@ -558,8 +559,6 @@ where Avps sets the Origin-Host, Origin-Realm, the specified Result-Code and (if the request sent one) Session-Id AVP's.

-Note that &the_rfc; mandates that only answers with a 3xxx series -Result-Code (protocol errors) may set the E bit. Returning a non-3xxx value in a protocol_error tuple will cause the request process in question to fail.

diff --git a/lib/diameter/src/base/diameter_traffic.erl b/lib/diameter/src/base/diameter_traffic.erl index c3b9c195fb..d6cb5ff0fa 100644 --- a/lib/diameter/src/base/diameter_traffic.erl +++ b/lib/diameter/src/base/diameter_traffic.erl @@ -20,7 +20,7 @@ %% %% Implements the handling of incoming and outgoing Diameter messages %% except CER/CEA, DWR/DWA and DPR/DPA. That is, the messages that a -%% diameter client sends of receives. +%% diameter client sends and receives. %% -module(diameter_traffic). @@ -38,7 +38,7 @@ failover/1, pending/1]). -%% Other callbacks. +%% towards ?MODULE -export([send/1]). %% send from remote node -include_lib("diameter/include/diameter.hrl"). @@ -187,46 +187,39 @@ recv_request(TPid, Dict0, #recvdata{peerT = PeerT, apps = Apps} = RecvData) -> - recv_request(diameter_service:find_incoming_app(PeerT, TPid, Id, Apps), - TPid, - Pkt, - Dict0, - RecvData). - -%% recv_request/5 - -recv_request({#diameter_app{id = Id, dictionary = Dict} = App, Caps}, - TPid, - Pkt, - Dict0, - RecvData) -> - recv_R(App, + send_A(recv_R(diameter_service:find_incoming_app(PeerT, TPid, Id, Apps), + TPid, + Pkt, + RecvData), TPid, - Caps, Dict0, - RecvData, - errors(Id, diameter_codec:decode(Id, Dict, Pkt))); + RecvData). + +%% recv_R/4 + +recv_R({#diameter_app{id = Id, dictionary = Dict} = App, Caps}, + TPid, + Pkt0, + RecvData) -> + Pkt = errors(Id, diameter_codec:decode(Id, Dict, Pkt0)), + {Caps, Pkt, App, recv_R(App, TPid, Caps, RecvData, Pkt)}; %% Note that the decode is different depending on whether or not Id is %% ?APP_ID_RELAY. %% DIAMETER_APPLICATION_UNSUPPORTED 3007 %% A request was sent for an application that is not supported. -recv_request(#diameter_caps{} - = Caps, - TPid, - #diameter_packet{errors = Es} - = Pkt, - Dict0, - _) -> - protocol_error(TPid, - Caps, - Dict0, - Pkt#diameter_packet{avps = collect_avps(Pkt), - errors = [3007 | Es]}); - -recv_request(false, _, _, _, _) -> %% transport has gone down - ok. +recv_R(#diameter_caps{} + = Caps, + _TPid, + #diameter_packet{errors = Es} + = Pkt, + _RecvData) -> + {Caps, Pkt#diameter_packet{avps = collect_avps(Pkt), + errors = [3007 | Es]}}; + +recv_R(false = No, _, _, _) -> %% transport has gone down + No. collect_avps(Pkt) -> case diameter_codec:collect_avps(Pkt) of @@ -236,44 +229,38 @@ collect_avps(Pkt) -> As end. -%% recv_R/6 +%% recv_R/5 %% Answer 3xxx errors ourselves ... recv_R(#diameter_app{options = [_, {request_errors, answer_3xxx} | _]}, - TPid, - Caps, - Dict0, + _TPid, + _Caps, _RecvData, - #diameter_packet{errors = [RC|_]} = Pkt) + #diameter_packet{errors = [RC|_]}) %% a detected 3xxx is hd when 3 == RC div 1000 -> - protocol_error(TPid, Caps, Dict0, Pkt); + {{protocol_error, RC}, [], []}; %% ... or make a handle_request callback. Note that %% Pkt#diameter_packet.msg = undefined in the 3001 case. recv_R(App, TPid, Caps, - Dict0, - #recvdata{service_name = SvcName} - = RecvData, + #recvdata{service_name = SvcName}, Pkt) -> request_cb(cb(App, handle_request, [Pkt, SvcName, {TPid, Caps}]), App, - TPid, - Caps, - Dict0, - RecvData, [], - Pkt). + []). %% errors/1 %% -%% Look for errors in a decoded message, prepending the errors field -%% with the first detected error. It's odd/unfortunate that 5011 isn't -%% a protocol error. +%% Look for additional errors in a decoded message, prepending the +%% errors field with the first detected error. It's odd/unfortunate +%% that 501[15] aren't protocol errors. With RFC 3588 this means that +%% a handle_request callback has to formulate the answer. With RFC +%% 6733 it's acceptable for 5xxx to be sent in an answer-message. %% DIAMETER_INVALID_MESSAGE_LENGTH 5015 -%% %% This error is returned when a request is received with an invalid %% message length. @@ -333,48 +320,27 @@ errors(_, #diameter_packet{header = #diameter_header{is_request = true, errors(_, Pkt) -> Pkt. -%% request_cb/8 +%% request_cb/4 %% A reply may be an answer-message, constructed either here or by %% the handle_request callback. The header from the incoming request %% is passed into the encode so that it can retrieve the relevant %% command code in this case. It will also then ignore Dict and use %% the base encoder. -request_cb({reply, Ans}, - #diameter_app{dictionary = Dict}, - TPid, - _Caps, - Dict0, - _RecvData, - Fs, - Pkt) -> - reply(Ans, dict(Dict, Dict0, Ans), TPid, Fs, Pkt); +request_cb({reply, _Ans} = T, _App, EvalPktFs, EvalFs) -> + {T, EvalPktFs, EvalFs}; %% An 3xxx result code, for which the E-bit is set in the header. -request_cb({protocol_error, RC}, - _App, - TPid, - Caps, - Dict0, - _RecvData, - Fs, - Pkt) +request_cb({protocol_error, RC} = T, _App, EvalPktFs, EvalFs) when 3 == RC div 1000 -> - protocol_error(RC, TPid, Caps, Dict0, Fs, Pkt); + {T, EvalPktFs, EvalFs}; %% RFC 3588 says we must reply 3001 to anything unrecognized or %% unsupported. 'noreply' is undocumented (and inappropriately named) %% backwards compatibility for this, protocol_error the documented %% alternative. -request_cb(noreply, - _App, - TPid, - Caps, - Dict0, - _RecvData, - Fs, - Pkt) -> - protocol_error(3001, TPid, Caps, Dict0, Fs, Pkt); +request_cb(noreply, _App, EvalPktFs, EvalFs) -> + {{protocol_error, 3001}, EvalPktFs, EvalFs}; %% Relay a request to another peer. This is equivalent to doing an %% explicit call/4 with the message in question except that (1) a loop @@ -391,29 +357,71 @@ request_cb(noreply, %% want to distinguish between the cases in the callback return value %% then 'resend' is a neutral alternative. %% -request_cb({A, Opts}, - #diameter_app{id = Id} - = App, - TPid, - Caps, - Dict0, - RecvData, - Fs, - Pkt) +request_cb({A, Opts}, #diameter_app{id = Id}, EvalPktFs, EvalFs) when A == relay, Id == ?APP_ID_RELAY; A == proxy, Id /= ?APP_ID_RELAY; A == resend -> - resend(Opts, App, TPid, Caps, Dict0, RecvData, Fs, Pkt); + {{call, Opts}, EvalPktFs, EvalFs}; -request_cb(discard, _, _, _, _, _, _, _) -> - ok; +request_cb(discard = No, _, _, _) -> + No; + +request_cb({eval_packet, RC, F}, App, Fs, EvalFs) -> + request_cb(RC, App, [F|Fs], EvalFs); + +request_cb({eval, RC, F}, App, EvalPktFs, Fs) -> + request_cb(RC, App, EvalPktFs, [F|Fs]); + +request_cb(T, #diameter_app{module = ModX}, _, _) -> + ?ERROR({invalid_return, T, {ModX, handle_request}}). + +%% send_A/4 -request_cb({eval_packet, RC, F}, App, TPid, Caps, Dict0, RecvData, Fs, Pkt) -> - request_cb(RC, App, TPid, Caps, Dict0, RecvData, [F|Fs], Pkt); +send_A({Caps, Pkt}, TPid, Dict0, _RecvData) -> %% unsupported application + #diameter_packet{errors = [RC|_]} = Pkt, + send_A(protocol_error(RC, Caps, Dict0, Pkt), + TPid, + Pkt, + [], + []); + +send_A({Caps, Pkt, App, {T, EvalPktFs, EvalFs}}, TPid, Dict0, RecvData) -> + send_A(answer(T, Caps, Pkt, App, Dict0, RecvData), + TPid, + Pkt, + EvalPktFs, + EvalFs); + +send_A(_, _, _, _) -> + ok. -request_cb({eval, RC, F}, App, TPid, Caps, Dict0, RecvData, Fs, Pkt) -> - request_cb(RC, App, TPid, Caps, Dict0, RecvData, Fs, Pkt), - diameter_lib:eval(F). +%% send_A/5 + +send_A(T, TPid, ReqPkt, EvalPktFs, EvalFs) -> + reply(T, TPid, EvalPktFs, ReqPkt), + lists:foreach(fun diameter_lib:eval/1, EvalFs). + +%% answer/6 + +answer({reply, Ans}, _Caps, _Pkt, App, Dict0, _RecvData) -> + {dict(App#diameter_app.dictionary, Dict0, Ans), Ans}; + +answer({call, Opts}, Caps, Pkt, App, Dict0, RecvData) -> + #diameter_caps{origin_host = {OH,_}} + = Caps, + #diameter_packet{avps = Avps} + = Pkt, + {Code, _Flags, Vid} = Dict0:avp_header('Route-Record'), + resend(is_loop(Code, Vid, OH, Dict0, Avps), + Opts, + Caps, + Pkt, + App, + Dict0, + RecvData); + +answer({protocol_error, RC}, Caps, Pkt, _App, Dict0, _RecvData) -> + protocol_error(RC, Caps, Dict0, Pkt). %% dict/3 @@ -430,73 +438,31 @@ dict(Dict, Dict0, [Msg]) -> dict(Dict, Dict0, #diameter_packet{msg = Msg}) -> dict(Dict, Dict0, Msg); -dict(_Dict, Dict0, ['answer-message' | _]) -> - Dict0; +dict(Dict, Dict0, Msg) -> + choose(is_answer_message(Msg, Dict0), Dict0, Dict). + +is_answer_message([Name | _], _) -> + Name == 'answer-message'; -dict(Dict, Dict0, Rec) -> +is_answer_message(Rec, Dict) -> try - 'answer-message' = Dict0:rec2msg(element(1,Rec)), - Dict0 + 'answer-message' == Dict:rec2msg(element(1,Rec)) catch - error:_ -> Dict + error:_ -> false end. -%% protocol_error/5 +%% protocol_error/4 -protocol_error(TPid, +protocol_error(RC, #diameter_caps{origin_host = {OH,_}, origin_realm = {OR,_}}, Dict0, - Fs, - #diameter_packet{avps = Avps, - errors = [RC|_]} + #diameter_packet{avps = Avps} = Pkt) -> ?LOG({error, RC}, Pkt), - reply(answer_message({OH, OR, RC}, Dict0, Avps), Dict0, TPid, Fs, Pkt). -%% Note that reply/5 may set the result code once more. It's set in -%% answer_message/3 in case reply/5 doesn't. - -protocol_error(TPid, Caps, Dict0, Pkt) -> - protocol_error(TPid, Caps, Dict0, [], Pkt). - -protocol_error(RC, - TPid, - Caps, - Dict0, - Fs, - #diameter_packet{errors = Es} - = Pkt) -> - protocol_error(TPid, - Caps, - Dict0, - Fs, - Pkt#diameter_packet{errors = [RC | Es]}). + {Dict0, answer_message(OH, OR, RC, Dict0, Avps)}. %% resend/7 -%% -%% Resend a message as a relay or proxy agent. - -resend(Opts, - #diameter_app{} - = App, - TPid, - #diameter_caps{origin_host = {OH,_}} - = Caps, - Dict0, - RecvData, - Fs, - #diameter_packet{avps = Avps} - = Pkt) -> - {Code, _Flags, Vid} = Dict0:avp_header('Route-Record'), - resend(is_loop(Code, Vid, OH, Dict0, Avps), - Opts, - App, - TPid, - Caps, - Dict0, - RecvData, - Fs, - Pkt). %% DIAMETER_LOOP_DETECTED 3005 %% An agent detected a loop while trying to get the message to the @@ -504,8 +470,8 @@ resend(Opts, %% if one is available, but the peer reporting the error has %% identified a configuration problem. -resend(true, _Opts, _App, TPid, Caps, Dict0, _RecvData, Fs, Pkt) -> - protocol_error(3005, TPid, Caps, Dict0, Fs, Pkt); +resend(true, _Opts, Caps, Pkt, _App, Dict0, _RecvData) -> + protocol_error(3005, Caps, Dict0, Pkt); %% 6.1.8. Relaying and Proxying Requests %% @@ -515,22 +481,20 @@ resend(true, _Opts, _App, TPid, Caps, Dict0, _RecvData, Fs, Pkt) -> resend(false, Opts, - App, - TPid, #diameter_caps{origin_host = {_,OH}} = Caps, - Dict0, - #recvdata{service_name = SvcName, - sequence = Mask}, - Fs, #diameter_packet{header = Hdr0, avps = Avps} - = Pkt) -> + = Pkt, + App, + Dict0, + #recvdata{service_name = SvcName, + sequence = Mask}) -> Route = #diameter_avp{data = {Dict0, 'Route-Record', OH}}, Seq = diameter_session:sequence(Mask), Hdr = Hdr0#diameter_header{hop_by_hop_id = Seq}, Msg = [Hdr, Route | Avps], - resend(send_request(SvcName, App, Msg, Opts), TPid, Caps, Dict0, Fs, Pkt). + resend(send_request(SvcName, App, Msg, Opts), Caps, Dict0, Pkt). %% The incoming request is relayed with the addition of a %% Route-Record. Note the requirement on the return from call/4 below, %% which places a requirement on the value returned by the @@ -547,28 +511,24 @@ resend(false, %% RFC 6.3 says that a relay agent does not modify Origin-Host but %% says nothing about a proxy. Assume it should behave the same way. -%% resend/6 +%% resend/4 %% %% Relay a reply to a relayed request. %% Answer from the peer: reset the hop by hop identifier and send. resend(#diameter_packet{bin = B} = Pkt, - TPid, _Caps, _Dict0, - Fs, #diameter_packet{header = #diameter_header{hop_by_hop_id = Id}, transport_data = TD}) -> - P = Pkt#diameter_packet{bin = diameter_codec:hop_by_hop_id(Id, B), - transport_data = TD}, - eval_packet(P, Fs), - send(TPid, P); + Pkt#diameter_packet{bin = diameter_codec:hop_by_hop_id(Id, B), + transport_data = TD}; %% TODO: counters %% Or not: DIAMETER_UNABLE_TO_DELIVER. -resend(_, TPid, Caps, Dict0, Fs, Pkt) -> - protocol_error(3002, TPid, Caps, Dict0, Fs, Pkt). +resend(_, Caps, Dict0, Pkt) -> + protocol_error(3002, Caps, Dict0, Pkt). %% is_loop/5 %% @@ -591,38 +551,111 @@ is_loop(Code, Vid, OH, Dict0, [_ | Avps]) is_loop(Code, Vid, OH, Dict0, Avps) -> is_loop(Code, Vid, Dict0:avp(encode, OH, 'Route-Record'), Dict0, Avps). +%% reply/4 + +%% Local answer ... +reply({Dict, Ans}, TPid, Fs, ReqPkt) -> + reply(Ans, Dict, TPid, Fs, ReqPkt); + +%% ... or relayed. +reply(#diameter_packet{} = Pkt, TPid, Fs, _ReqPkt) -> + eval_packet(Pkt, Fs), + send(TPid, Pkt). + %% reply/5 %% %% Send a locally originating reply. %% Skip the setting of Result-Code and Failed-AVP's below. This is -%% currently undocumented. -reply([Msg], Dict, TPid, Fs, Pkt) +%% undocumented and shouldn't be relied on. +reply([Msg], Dict, TPid, Fs, ReqPkt) when is_list(Msg); is_tuple(Msg) -> - reply(Msg, Dict, TPid, Fs, Pkt#diameter_packet{errors = []}); + reply(Msg, Dict, TPid, Fs, ReqPkt#diameter_packet{errors = []}); %% No errors or a diameter_header/avp list. -reply(Msg, Dict, TPid, Fs, #diameter_packet{errors = Es} = ReqPkt) - when [] == Es; - is_record(hd(Msg), diameter_header) -> - Pkt = encode(Dict, make_answer_packet(Msg, ReqPkt), Fs), +reply(Msg, Dict, TPid, Fs, ReqPkt) -> + Pkt = encode(Dict, reset(make_answer_packet(Msg, ReqPkt), Dict), Fs), incr(send, Pkt, Dict, TPid), %% count result codes in sent answers - send(TPid, Pkt); + send(TPid, Pkt). + +%% reset/2 + +%% Header/avps list: send as is. +reset(#diameter_packet{msg = [#diameter_header{} | _]} = Pkt, _) -> + Pkt; + +%% No errors to set or errors explicitly ignored. +reset(#diameter_packet{errors = Es} = Pkt, _) + when Es == []; + Es == false -> + Pkt; + +%% Otherwise possibly set Result-Code and/or Failed-AVP. +reset(#diameter_packet{msg = Msg, errors = Es} = Pkt, Dict) -> + Pkt#diameter_packet{msg = reset(Msg, Dict, Es)}. -%% Or not: set Result-Code and Failed-AVP AVP's. -reply(Msg, Dict, TPid, Fs, #diameter_packet{errors = [H|_] = Es} = Pkt) -> - reply(rc(Msg, rc(H), [A || {_,A} <- Es], Dict), +%% reset/3 + +reset(Msg, Dict, Es) + when is_list(Es) -> + {E3, E5, Fs} = partition(Es), + FailedAVP = failed_avp(Msg, lists:reverse(Fs), Dict), + reset(set(Msg, FailedAVP, Dict), Dict, - TPid, - Fs, - Pkt#diameter_packet{errors = []}). + choose(is_answer_message(Msg, Dict), E3, E5)); + +reset(Msg, Dict, N) + when is_integer(N) -> + ResultCode = rc(Msg, {'Result-Code', N}, Dict), + set(Msg, ResultCode, Dict); + +reset(Msg, _, _) -> + Msg. + +partition(Es) -> + lists:foldl(fun pacc/2, {false, false, []}, Es). + +%% Note that the errors list can contain not only integer() and +%% {integer(), #diameter_avp{}} but also #diameter_avp{}. The latter +%% isn't something that's returned by decode but can be set in a reply +%% for encode. + +pacc({RC, #diameter_avp{} = A}, {E3, E5, Acc}) + when is_integer(RC) -> + pacc(RC, {E3, E5, [A|Acc]}); + +pacc(#diameter_avp{} = A, {E3, E5, Acc}) -> + {E3, E5, [A|Acc]}; + +pacc(RC, {false, E5, Acc}) + when 3 == RC div 1000 -> + {RC, E5, Acc}; + +pacc(RC, {E3, false, Acc}) + when 5 == RC div 1000 -> + {E3, RC, Acc}; + +pacc(_, Acc) -> + Acc. eval_packet(Pkt, Fs) -> lists:foreach(fun(F) -> diameter_lib:eval([F,Pkt]) end, Fs). %% make_answer_packet/2 +%% Use decode errors to set Result-Code and/or Failed-AVP unless the +%% the errors field has been explicitly set. Unfortunately, the +%% default value is the empty list rather than 'undefined' so use the +%% atom 'false' for "set nothing". (This is historical and changing +%% the default value would require modules including diameter.hrl to +%% be recompiled.) +make_answer_packet(#diameter_packet{errors = []} + = Pkt, + #diameter_packet{errors = [_|_] = Es} + = ReqPkt) -> + make_answer_packet(Pkt#diameter_packet{errors = Es}, ReqPkt); + %% A reply message clears the R and T flags and retains the P flag. %% The E flag will be set at encode. 6.2 of 3588 requires the same P %% flag on an answer as on the request. A #diameter_packet{} returned @@ -630,6 +663,7 @@ eval_packet(Pkt, Fs) -> %% own header values. make_answer_packet(#diameter_packet{header = Hdr, msg = Msg, + errors = Es, transport_data = TD}, #diameter_packet{header = ReqHdr}) -> Hdr0 = ReqHdr#diameter_header{version = ?DIAMETER_VERSION, @@ -638,6 +672,7 @@ make_answer_packet(#diameter_packet{header = Hdr, is_retransmitted = false}, #diameter_packet{header = fold_record(Hdr0, Hdr), msg = Msg, + errors = Es, transport_data = TD}; %% Binaries and header/avp lists are sent as-is. @@ -654,25 +689,6 @@ make_answer_packet([#diameter_header{} | _] = Msg, make_answer_packet(Msg, #diameter_packet{transport_data = TD} = Pkt) -> make_answer_packet(#diameter_packet{msg = Msg, transport_data = TD}, Pkt). -%% rc/1 - -rc({RC, _}) -> - RC; -rc(RC) -> - RC. - -%% rc/4 - -rc(#diameter_packet{msg = Rec} = Pkt, RC, Failed, Dict) -> - Pkt#diameter_packet{msg = rc(Rec, RC, Failed, Dict)}; - -rc(Rec, RC, Failed, Dict) - when is_integer(RC) -> - set(Rec, - lists:append([rc(Rec, {'Result-Code', RC}, Dict), - failed_avp(Rec, Failed, Dict)]), - Dict). - %% Reply as name and tuple list ... set([_|_] = Ans, Avps, _) -> Ans ++ Avps; %% Values nearer tail take precedence. @@ -798,9 +814,9 @@ fa(Rec, FailedAvp, Dict) -> %% Error-Message AVP is not intended to be useful in real-time, and %% SHOULD NOT be expected to be parsed by network entities. -%% answer_message/3 +%% answer_message/5 -answer_message({OH, OR, RC}, Dict0, Avps) -> +answer_message(OH, OR, RC, Dict0, Avps) -> {Code, _, Vid} = Dict0:avp_header('Session-Id'), ['answer-message', {'Origin-Host', OH}, {'Origin-Realm', OR}, -- cgit v1.2.3