From 84adefa331c4159d432d22840663c38f155cd4c1 Mon Sep 17 00:00:00 2001 From: Erlang/OTP Date: Fri, 20 Nov 2009 14:54:40 +0000 Subject: The R13B03 release. --- lib/mnesia/doc/misc/Makefile | 64 ++++++ lib/mnesia/doc/misc/implementation.txt | 375 +++++++++++++++++++++++++++++++++ 2 files changed, 439 insertions(+) create mode 100644 lib/mnesia/doc/misc/Makefile create mode 100644 lib/mnesia/doc/misc/implementation.txt (limited to 'lib/mnesia/doc/misc') diff --git a/lib/mnesia/doc/misc/Makefile b/lib/mnesia/doc/misc/Makefile new file mode 100644 index 0000000000..e5fa327f5b --- /dev/null +++ b/lib/mnesia/doc/misc/Makefile @@ -0,0 +1,64 @@ +# +# %CopyrightBegin% +# +# Copyright Ericsson AB 1996-2009. All Rights Reserved. +# +# The contents of this file are subject to the Erlang Public License, +# Version 1.1, (the "License"); you may not use this file except in +# compliance with the License. You should have received a copy of the +# Erlang Public License along with this software. If not, it can be +# retrieved online at http://www.erlang.org/. +# +# Software distributed under the License is distributed on an "AS IS" +# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +# the License for the specific language governing rights and limitations +# under the License. +# +# %CopyrightEnd% +# + +# +OTP_MAKE_ROOT=/home/super/otp/otp_make +include $(OTP_MAKE_ROOT)/otp.mk + +# +# Release Macros +# + +# +# Common macros +# + + +SGML_FILES= release_notes.sgml + +FIG_FILES = +HTML_FILES= $(SGML_FILES:.sgml=.html) +TEX_FILES= $(SGML_FILES:.sgml=.tex) +DVI_FILES= $(SGML_FILES:.sgml=.dvi) +PSFIG_FILES= $(FIG_FILES:.fig=.ps) +PS_FILES= $(SGML_FILES:.sgml=.ps) +GIF_FILES= min_head.gif +ERL_FILES= +HRL_FILES= +DATA_FILES= + + +# +# Make Rules +# + +all $(DEFAULT_OPT_TARGETS) $(DEFAULT_DEBUG_TARGETS): $(HTML_FILES) $(TEX_FILES) $(PSFIG_FILES) $(DVI_FILES) $(PS_FILES) + +clean: + @rm -f *.toc *.log *.aux *.tex sgmls_output sgmls_errs $(HTML_FILES) $(TEX_FILES) $(DVI_FILES) $(PSFIG_FILES) $(PS_FILES) + +# +# Release Targets +# +include $(OTP_MAKE_ROOT)/otp_release_targets.mk + +release_variant: opt.$(TARGET) + $(MKPATH.$(TARGET)) $(RELEASE_PATH)/$(TARGET)/lib/mnesia-$(VSN)/doc/misc + $(INSTALLFILES.$(TARGET)) $(HTML_FILES) $(GIF_FILES) $(ERL_FILES) $(HRL_FILES) $(DATA_FILES) $(PS_FILES) $(RELEASE_PATH)/$(TARGET)/lib/mnesia-$(VSN)/doc/misc + diff --git a/lib/mnesia/doc/misc/implementation.txt b/lib/mnesia/doc/misc/implementation.txt new file mode 100644 index 0000000000..1b8369e466 --- /dev/null +++ b/lib/mnesia/doc/misc/implementation.txt @@ -0,0 +1,375 @@ + +Mnesia + +1 Introduction + +This document aims to give a brief introduction of the implementation +of mnesia, it's data and functions. + +Håkan has written other mnesia papers of interest, (see ~hakan/public_html/): +o Resource consumption (mnesia_consumption.txt) +o What to think about when changing mnesia (mnesia_upgrade_policy.txt) +o Mnesia internals course (mnesia_internals_slides.pdf) +o Mnesia overview (mnesia_overview.pdf) + +1.1. Basic concepts + +In a mnesia cluster all nodes are equal, there is no concept off +master or backup nodes. That said when mixing disc based (uses the +disc to store meta information) nodes and ram based (do not use disc +at all) nodes the disc based ones sometimes have precedence over ram +based nodes. + +2 Meta Data + +Mnesia has two types of global meta data, static and dynamic. +All the meta data is stored in the ets table mnesia_gvar. + +2.1 Static Meta Data +The static data is the schema information, usually kept in +'schema.DAT' file, the data is created with +mnesia:create_schema(Nodes) for disc nodes (i.e. nodes which uses the +disc). Ram based mnesia nodes create an empty schema at startup. + +The static data i.e. schema, contains information about which nodes +are involved in the cluster and which type (ram or disc) they have. It +also contains information about which tables exist on which node and +so on. + +The schema information (static data) must always be the same on all +active nodes in the mnesia cluster. Schema information is updated via +schema functions, e.g. mnesia:add_table_copy/3, +mnesia:change_table_copy/3... + +2.2 Dynamic Meta Data + +The dynamic data is transient and is local to each mnesia node +in the cluster. Examples of dynamic data is: currently active mnesia +nodes, which tables are currently available and where are they +located. Dynamic data is updated internally by each mnesia during the +nodes lifetime, i.e. when nodes goes up and down or are added to or +deleted from the mnesia cluster. + +3 Processes and Files + +The most important processes in mnesia are mnesia_monitor, +mnesia_controller, mnesia_tm and mnesia_locker. + +Mnesia_monitor acts as supervisor and monitors all resources. It +listens for nodeup and nodedown and keeps links to other mnesia nodes, +if a node goes down it forwards the information to all the necessary +processes, e.g. mnesia_controller, mnesia_locker, mnesia_tm and all +transactions. During start it negotiates the protocol version with +the other nodes and keep track of which nodes uses which version. The +monitor process also detects and warns about partioned networks, it is +then up to the user to deal with them. It is the owner of all open +files, ets tables and so on. + +The mnesia_controller process is responsible for loading tables, +keeping the dynamic meta data updated, synchronize dangerous work such +as schema transactions vs dump log operation vs table loading/sending. + +The last two processes are involved in all transactions, the +mnesia_locker process manages transaction locks, and mnesia_tm manages +all transaction work. + +4 Startup and table Loading + +The early startup is mostly driven by the mnesia_tm process/module, +logs are dumped (see log dumping), node-names of other nodes in the +cluster are retrieved from the static meta data or from environment +parameters and initial connections are made to the other mnesia +nodes. + +The rest of start up is driven by the mnesia_controller process where +the schema (static meta data) is merged between each node, this is +done to keep the schema consistent between all nodes in the +cluster. When the schema is merged all local tables are put in a +loading queue, tables which are only available or have local content +is loaded directly from disc or created if they are type ram_copies. + +The other tables are kept in the queue until mnesia decides whether to +load them from disk or from another node. If another mnesia node has +already loaded the table, i.e. got a copy in ram or an open dets file, +the table is always loaded from that node to keep the data consistent. +If no other node has a loaded copy of the table, some mnesia node has +to load it first, and the other nodes can copy the table from the +first node. Mnesia keeps information about when other nodes went down, +a starting mnesia will check which nodes have been down, if some of +the nodes have not been down the starting node will let those nodes +load the table first. If all other nodes have been down then the +starting mnesia will load the table. The node that is allowed to load +the table will load it and the other nodes will copy it from that node. + +If a node, which the starter node has not a 'mnesia_down' note from, +is down the starter node will have to wait until that node comes up +and decision can be taken, this behavior can be overruled by user +settings. The order of table loading could be described as: + +1. Mnesia downs, Normally decides from where mnesia should load tables. +2. Master nodes (overrides mnesia downs). +3. Force load (overrides Master nodes). + 1) If possible, load table from active master nodes + 2) if no master nodes is active load from any active nodes, + 3) if no active node has an active table get local copy + (if ram create empty one) + +Currently mnesia can handle one download and one upload at the same +time. Dumping and loading/sending may run simultaneously but neither +of them may run during schema commit. Loaders/senders may not start if +a schema commit is enqueued. That synchronization is made to prohibit +that the schema transaction modifies the meta data and the +prerequisites of the table loading changes. + +The actual loading of a table is implemented in 'mnesia_loader.erl'. +It currently works as follows: + +Receiver Sender +-------- ------ +Spawned +Find sender node +Queue sender request ----> + Spawned +*)Spawn real receiver <---- Send init info +*)Grab schema lock for Grab write table lock + that table to avoid Subscribe receiver + deadlock with schema transactions to table updates +Create table (ets or dets) Release Lock + +Get data (with ack ----> + as flow control) <---- Burst data to receiver + Send no_more +Apply subscription messages +Store copy on disc Grab read lock +Create index, snmp data Update meta data info +and checkpoints if needed cleanup +no_more ----> + Release lock + +*) Don't spawn or grab schema lock if operation is add_table_copy, + it's already a schema operation. + + +5 Transaction + +Transaction are normally driven from the client process, i.e. the +process that call 'mnesia:transaction'. The client first acquires a +globally unique transaction id (tid) and temporary transaction storage +(ts an ets table) from mnesia_tm and then executes the transaction +fun. Mnesia-api calls such as 'mnesia:write/1' and 'mnesia:read' +contains code for acquiring the needed locks. Intermediate database +states and acquired locks are kept in the transaction storage, and all +mnesia operations has to be "patched" against that store. I.e. a write +operation in a transaction should be seen within (and only within) +that transaction, if the same key is read after the write. +After the transaction fun is completed the ts is analyzed to see which +nodes are involved in the transaction, and what type of commit protocol +shall be used. Then the result is committed and additional work such as +snmp, checkpoints and index updates are performed. The transaction is +finish by releasing all resources. + +An example: + +Example = fun(X) -> + {table1, key, Value} = mnesia:read(table1, key), + ok = mnesia:write(table1, {table1, key, Value+X}), + {table1, key, Updated} = mnesia:read(table1, key), + Updated + end, +mnesia:transaction(Example, [10]). + +A message overview of a simple successful asynchronous transaction + non local +Client Process mnesia_tm(local) mnesia_locker mnesia_tm +------------------------------------------------------------------------ +Get tid ----> + <--- Tid and ts +Get read lock +from available node -------------------------------> +Value <----------Value or restart trans--- +Patch value against ts + +Get write lock +from all nodes -------------------------------> + -------------------------------> +ok's <<---------ok's or restart trans--- +write data in ts + +Get read lock,already done. +Read data Value +'Patch' data with ts +Fun return Value+X. + +If everything is ok +commit transaction + +Find the nodes that the transaction +needs to be committed on and +collect every update from ts. + +Ask for commit -----------> + -----------------------------------------------> + +Ok's <<--------- ------------------------------ +Commit -----------------------------------------------> +log commit decision on disk +Commit locally + update snmp + update checkpoints + notify subscribers + update index + +Release locks -------------------------------> +Release transaction -----> + +Return trans result +---------------------- + +If all needed resources are available, i.e. the needed tables are +loaded somewhere in the cluster during the transaction, and the user +code doesn't crash, a transaction in mnesia won't fail. If something +happens in the mnesia cluster such as node down from the replica the +transaction was about to read from, or that a lock couldn't be +acquired and the transaction was not allowed to be queued on that +lock, the transaction is restarted, i.e. all resources are released +and the fun is called again. By default a transaction can be +restarted is infinity many times, but the user may choose to limit +the number of restarts. + +The dirty operations don't do any of the above they just finds out +where to write the data, logs the operation to disk and casts (or call +in case of sync_dirty operation) the data to those nodes. Therefore +the dirty operations have the drawback that each write or delete sends +a message per operation to the involved nodes. + +There is also a synchronous variant of 2-phase commit protocol which +waits on an additional ack message after the transaction is committed +on every node. The intention is to provide the user with a way to +solve overloading problems. + +A 3-phase commit protocol is used for schema transaction or if the +transaction result is going to be committed in a asymmetrical way, +i.e. a transaction that writes to table a and b where table a and b +have replicas on different nodes. The outcome of the transactions are +stored temporary in an ets table and in the log file. + +6 Schema transactions + +Schema transactions are handled differently than ordinary +transactions, they are implemented in mnesia_schema (and in +mnesia_dumper). The schema operation is always spawned to protect from +that the client process dies during the transaction. + +The actual transaction fun checks the pre-conditions and acquires the +needed locks and notes the operation in the transaction store. During +the commit, the schema transaction runs a schema prepare operation (on +every node) that does the needed prerequisite job. Then the operation +is logged to disc, and the actual commit work is done by dumping the +log. Every schema operation has special clause in mnesia_dumper to +handle the finishing work. Every schema prepare operation has a +matching undo_prepare operation which needs to be invoked if the +transaction is aborted. + +7 Locks + +"The locking algorithm is a traditional 'two-phase locking'* and the +deadlock prevention is 'wait-die'*, time stamps for the wait-die algorithm +is 'Lamport clock'* maintained by mnesia_tm. The Lamport clock is kept +when the transaction is restarted to avoid starving." + +* References can be found in the paper mnesia_overview.pdf + Klacke, Håkan and Hans wrote about mnesia. + +What the quote above means is that read locks are acquired on the +replica that mnesia read from, write locks are acquired on all nodes +which have a replica. Several read lock can lock the same object, but +write locks are exclusive. The transaction identifier (tid) is a ever +increasing system uniq counter which have the same sort order on every +node (a Lamport clock), which enables mnesia_locker to order the lock +requests. When a lock request arrives, mnesia_locker checks whether +the lock is available, if it is a 'granted' is sent back to the client +and the lock is noted as taken in an ets table. If the lock is already +occupied, it's tid is compared with tid of the transaction holding the +lock. If the tid of holding transaction is greater than the tid of +asking transaction it's allowed to be put in the lock queue (another +ets table) and no response is sent back until the lock is released, if +not the transaction will get a negative response and mnesia_tm will +restart the transaction after it has slept for a random time. + +Sticky locks works almost as a write lock, the first time a sticky +lock is acquired a request is sent to all nodes. The lock is marked as +taken by the requesting node (not transaction), when the lock is later +released it's only released on the node that has the sticky lock, +thus the next time a transaction is requesting the lock it don't need +to ask the others nodes. If another node wants the lock it has to request +a lock release first, before it can acquire the lock. + +8 Fragmented tables + +Fragmented tables are used to split a large table in smaller parts. +It is implemented as a layer between the client and mnesia which +extends the meta data with additional properties and maps a {table, +key} tuple to a table_fragment. + +The default mapping is erlang:phash() but the user may provide his own +mapping function to be able to predict which records is stored in +which table fragment, e.g. the client may want to steer where a +record generated from a certain device is placed. + +The foreign key is used to co-locate other tables to the same node. +The other additinal table attributes are also used to distribute the +table fragments. + +9 Log Dumping + +All operations on disk tables are stored on a log 'LATEST.LOG' on +disk, so mnesia can redo the transactions if the node goes down. +Dumping the log means that mnesia moves the committed data from the +general log to the table specific disk storage. To avoid that the log +grows to large and uses a lot of disk space and makes the startup slow, +mnesia dumps the log during it's uptime. There are two triggers that +start the log dumping, timeouts and the number of commits since last +dump, both are user configurable. + +Disc copies tables are implemented with two disk_log files, one +'table.DCD' (disc copies data) and one 'table.DCL' (disc copies log). +The dcd contains raw records, and the dcl contains operations on that +table, i.e. '{write, {table, key, value}}' or '{delete, {table, +key}}'. First time a record for a specific table is found when +dumping the table, the size of both the dcd and the dcl files are +checked. And if the sizeof(dcl)/sizeof(dcd) is greater than a +threshold, the current ram table is dumped to file 'table.DCD' and the +corresponding dcl file is deleted, and all other records in the +general log that belongs to that table are ignored. If the threshold +is not meet than the operations in the general log to that table are +appended to the dcl file. On start up both files are read, first the +contents of the dcd are loaded to an ets table, then it's modified by +the operations stored in the corresponding dcl file. + +Disc only copies tables updates the 'dets' file directly when +committing the data so those entries can be ignored during normal log +dumping, they are only added to the 'dets' file during startup when +mnesia don't know the state of the disk table. + +10 Checkpoints and backups + +Checkpoints are created to be able to take snapshots of the database, +which is pretty good when you want consistent backups, i.e. you don't +want half of a transaction in the backup. The checkpoint creates a +shadow table (called retainer) for each table involved in the +checkpoint. When a checkpoint is requested it will not start until all +ongoing transactions are completed. The new transactions will update +both the real table and update the shadow table with operations to +undo the changes on the real table, when a key is modified the first +time. I.e. when write operation '{table, a, 14}' is made, the shadow +table is checked if key 'a' has a undo operation, if it has, nothing +more is done. If not a {write, {table, a, OLD_VALUE}} is added to the +shadow table if the real table had an old value, if not a {delete, +{table, a}} operation is added to the shadow table. + +The backup is taken by copying every record in the real table and then +appending every operation in the shadow table to the backup, thus +undoing the changes that where made since the checkpoint where +started. + + -- cgit v1.2.3