From 84adefa331c4159d432d22840663c38f155cd4c1 Mon Sep 17 00:00:00 2001 From: Erlang/OTP Date: Fri, 20 Nov 2009 14:54:40 +0000 Subject: The R13B03 release. --- lib/snmp/mibs/SNMP-TARGET-MIB.mib | 629 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 629 insertions(+) create mode 100644 lib/snmp/mibs/SNMP-TARGET-MIB.mib (limited to 'lib/snmp/mibs/SNMP-TARGET-MIB.mib') diff --git a/lib/snmp/mibs/SNMP-TARGET-MIB.mib b/lib/snmp/mibs/SNMP-TARGET-MIB.mib new file mode 100644 index 0000000000..b1b2c49753 --- /dev/null +++ b/lib/snmp/mibs/SNMP-TARGET-MIB.mib @@ -0,0 +1,629 @@ + SNMP-TARGET-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + snmpModules, + Counter32, + Integer32 + FROM SNMPv2-SMI + + TEXTUAL-CONVENTION, + TDomain, + TAddress, + TimeInterval, + RowStatus, + StorageType, + TestAndIncr + FROM SNMPv2-TC + + SnmpSecurityModel, + SnmpMessageProcessingModel, + SnmpSecurityLevel, + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + + MODULE-COMPLIANCE, + OBJECT-GROUP + FROM SNMPv2-CONF; + + snmpTargetMIB MODULE-IDENTITY + LAST-UPDATED "9808040000Z" + ORGANIZATION "IETF SNMPv3 Working Group" + CONTACT-INFO + "WG-email: snmpv3@tis.com + Subscribe: majordomo@tis.com + In message body: subscribe snmpv3 + + Chair: Russ Mundy + Trusted Information Systems + Postal: 3060 Washington Rd + Glenwood MD 21738 + USA + EMail: mundy@tis.com + Phone: +1-301-854-6889 + + Co-editor: David B. Levi + SNMP Research, Inc. + Postal: 3001 Kimberlin Heights Road + Knoxville, TN 37920-9716 + EMail: levi@snmp.com + Phone: +1 423 573 1434 + + Co-editor: Paul Meyer + Secure Computing Corporation + Postal: 2675 Long Lake Road + Roseville, MN 55113 + EMail: paul_meyer@securecomputing.com + Phone: +1 651 628 1592 + + Co-editor: Bob Stewart + Cisco Systems, Inc. + Postal: 170 West Tasman Drive + San Jose, CA 95134-1706 + EMail: bstewart@cisco.com + Phone: +1 603 654 2686" + DESCRIPTION + "This MIB module defines MIB objects which provide + mechanisms to remotely configure the parameters used + by an SNMP entity for the generation of SNMP messages." + REVISION "9808040000Z" + DESCRIPTION "Clarifications, published as + draft-ietf-snmpv3-appl-v2-01.txt." + REVISION "9707140000Z" + DESCRIPTION "The initial revision, published as RFC2273." + ::= { snmpModules 12 } + + snmpTargetObjects OBJECT IDENTIFIER ::= { snmpTargetMIB 1 } + snmpTargetConformance OBJECT IDENTIFIER ::= { snmpTargetMIB 3 } + + SnmpTagValue ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "An octet string containing a tag value. + Tag values are preferably in human-readable form. + + To facilitate internationalization, this information + is represented using the ISO/IEC IS 10646-1 character + set, encoded as an octet string using the UTF-8 + character encoding scheme described in RFC 2279. + + Since additional code points are added by amendments + to the 10646 standard from time to time, + implementations must be prepared to encounter any code + point from 0x00000000 to 0x7fffffff. + + The use of control codes should be avoided, and certain + control codes are not allowed as described below. + + For code points not directly supported by user + interface hardware or software, an alternative means + of entry and display, such as hexadecimal, may be + provided. + + For information encoded in 7-bit US-ASCII, the UTF-8 + representation is identical to the US-ASCII encoding. + + Note that when this TC is used for an object that + is used or envisioned to be used as an index, then a + SIZE restriction must be specified so that the number + of sub-identifiers for any object instance does not + exceed the limit of 128, as defined by [RFC1905]. + + An object of this type contains a single tag value + which is used to select a set of entries in a table. + + A tag value is an arbitrary string of octets, but + may not contain a delimiter character. Delimiter + characters are defined to be one of the following: + + - An ASCII space character (0x20). + + - An ASCII TAB character (0x09). + + - An ASCII carriage return (CR) character (0x0D). + + - An ASCII line feed (LF) character (0x0B). + + Delimiter characters are used to separate tag values + in a tag list. An object of this type may only + contain a single tag value, and so delimiter + characters are not allowed in a value of this type. + + Some examples of valid tag values are: + + - 'acme' + + - 'router' + + - 'host' + + The use of a tag value to select table entries is + application and MIB specific." + SYNTAX OCTET STRING (SIZE (0..255)) + + SnmpTagList ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "An octet string containing a list of tag values. + Tag values are preferably in human-readable form. + + To facilitate internationalization, this information + is represented using the ISO/IEC IS 10646-1 character + set, encoded as an octet string using the UTF-8 + character encoding scheme described in RFC 2279. + + Since additional code points are added by amendments + to the 10646 standard from time to time, + implementations must be prepared to encounter any code + point from 0x00000000 to 0x7fffffff. + + The use of control codes should be avoided, except as + described below. + + For code points not directly supported by user + interface hardware or software, an alternative means + of entry and display, such as hexadecimal, may be + provided. + + For information encoded in 7-bit US-ASCII, the UTF-8 + representation is identical to the US-ASCII encoding. + + An object of this type contains a list of tag values + which are used to select a set of entries in a table. + + A tag value is an arbitrary string of octets, but + may not contain a delimiter character. Delimiter + characters are defined to be one of the following: + + - An ASCII space character (0x20). + + - An ASCII TAB character (0x09). + + - An ASCII carriage return (CR) character (0x0D). + + - An ASCII line feed (LF) character (0x0B). + + Delimiter characters are used to separate tag values + in a tag list. Only a single delimiter character may + occur between two tag values. A tag value may not + have a zero length. These constraints imply certain + restrictions on the contents of this object: + + - There cannot be a leading or trailing delimiter + character. + + - There cannot be multiple adjacent delimiter + characters. + + Some examples of valid tag lists are: + + - An empty string + + - 'acme router' + + - 'host managerStation' + + Note that although a tag value may not have a length of + zero, an empty string is still valid. This indicates + an empty list (i.e. there are no tag values in the list). + + The use of the tag list to select table entries is + application and MIB specific. Typically, an application + will provide one or more tag values, and any entry + which contains some combination of these tag values + will be selected." + SYNTAX OCTET STRING (SIZE (0..255)) + + -- + -- + -- The snmpTargetObjects group + -- + -- + + snmpTargetSpinLock OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to facilitate modification of table + entries in the SNMP-TARGET-MIB module by multiple + managers. In particular, it is useful when modifying + the value of the snmpTargetAddrTagList object. + + The procedure for modifying the snmpTargetAddrTagList + object is as follows: + + 1. Retrieve the value of snmpTargetSpinLock and + of snmpTargetAddrTagList. + + 2. Generate a new value for snmpTargetAddrTagList. + + 3. Set the value of snmpTargetSpinLock to the + retrieved value, and the value of + snmpTargetAddrTagList to the new value. If + the set fails for the snmpTargetSpinLock + object, go back to step 1." + ::= { snmpTargetObjects 1 } + + snmpTargetAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnmpTargetAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of transport addresses to be used in the generation + of SNMP messages." + ::= { snmpTargetObjects 2 } + + snmpTargetAddrEntry OBJECT-TYPE + SYNTAX SnmpTargetAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A transport address to be used in the generation + of SNMP operations. + + Entries in the snmpTargetAddrTable are created and + deleted using the snmpTargetAddrRowStatus object." + INDEX { IMPLIED snmpTargetAddrName } + ::= { snmpTargetAddrTable 1 } + + SnmpTargetAddrEntry ::= SEQUENCE { + snmpTargetAddrName SnmpAdminString, + snmpTargetAddrTDomain TDomain, + snmpTargetAddrTAddress TAddress, + snmpTargetAddrTimeout TimeInterval, + snmpTargetAddrRetryCount Integer32, + snmpTargetAddrTagList SnmpTagList, + snmpTargetAddrParams SnmpAdminString, + snmpTargetAddrStorageType StorageType, + snmpTargetAddrRowStatus RowStatus + } + + snmpTargetAddrName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this snmpTargetAddrEntry." + ::= { snmpTargetAddrEntry 1 } + + snmpTargetAddrTDomain OBJECT-TYPE + SYNTAX TDomain + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the transport type of the address + contained in the snmpTargetAddrTAddress object." + ::= { snmpTargetAddrEntry 2 } + + snmpTargetAddrTAddress OBJECT-TYPE + SYNTAX TAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object contains a transport address. The format of + this address depends on the value of the + snmpTargetAddrTDomain object." + ::= { snmpTargetAddrEntry 3 } + + snmpTargetAddrTimeout OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object should reflect the expected maximum round + trip time for communicating with the transport address + defined by this row. When a message is sent to this + address, and a response (if one is expected) is not + received within this time period, an implementation + may assume that the response will not be delivered. + + Note that the time interval that an application waits + for a response may actually be derived from the value + of this object. The method for deriving the actual time + interval is implementation dependent. One such method + is to derive the expected round trip time based on a + particular retransmission algorithm and on the number + of timeouts which have occurred. The type of message may + also be considered when deriving expected round trip + times for retransmissions. For example, if a message is + being sent with a securityLevel that indicates both + authentication and privacy, the derived value may be + increased to compensate for extra processing time spent + during authentication and encryption processing." + DEFVAL { 1500 } + ::= { snmpTargetAddrEntry 4 } + + snmpTargetAddrRetryCount OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies a default number of retries to be + attempted when a response is not received for a generated + message. An application may provide its own retry count, + in which case the value of this object is ignored." + DEFVAL { 3 } + ::= { snmpTargetAddrEntry 5 } + + snmpTargetAddrTagList OBJECT-TYPE + SYNTAX SnmpTagList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object contains a list of tag values which are + used to select target addresses for a particular + operation." + DEFVAL { "" } + ::= { snmpTargetAddrEntry 6 } + + snmpTargetAddrParams OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies an entry in the + snmpTargetParamsTable. The identified entry + contains SNMP parameters to be used when generating + messages to be sent to this transport address." + ::= { snmpTargetAddrEntry 7 } + + snmpTargetAddrStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row." + DEFVAL { nonVolatile } + ::= { snmpTargetAddrEntry 8 } + + snmpTargetAddrRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. + + To create a row in this table, a manager must + set this object to either createAndGo(4) or + createAndWait(5). + + Until instances of all corresponding columns are + appropriately configured, the value of the + corresponding instance of the snmpTargetAddrRowStatus + column is 'notReady'. + + In particular, a newly created row cannot be made + active until the corresponding instances of + snmpTargetAddrTDomain, snmpTargetAddrTAddress, and + snmpTargetAddrParams have all been set. + + The following objects may not be modified while the + value of this object is active(1): + - snmpTargetAddrTDomain + - snmpTargetAddrTAddress + An attempt to set these objects while the value of + snmpTargetAddrRowStatus is active(1) will result in + an inconsistentValue error." + ::= { snmpTargetAddrEntry 9 } + + snmpTargetParamsTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnmpTargetParamsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of SNMP target information to be used + in the generation of SNMP messages." + ::= { snmpTargetObjects 3 } + + snmpTargetParamsEntry OBJECT-TYPE + SYNTAX SnmpTargetParamsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of SNMP target information. + + Entries in the snmpTargetParamsTable are created and + deleted using the snmpTargetParamsRowStatus object." + INDEX { IMPLIED snmpTargetParamsName } + ::= { snmpTargetParamsTable 1 } + + SnmpTargetParamsEntry ::= SEQUENCE { + snmpTargetParamsName SnmpAdminString, + snmpTargetParamsMPModel SnmpMessageProcessingModel, + snmpTargetParamsSecurityModel SnmpSecurityModel, + snmpTargetParamsSecurityName SnmpAdminString, + snmpTargetParamsSecurityLevel SnmpSecurityLevel, + snmpTargetParamsStorageType StorageType, + snmpTargetParamsRowStatus RowStatus + } + + snmpTargetParamsName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this snmpTargetParamsEntry." + ::= { snmpTargetParamsEntry 1 } + + snmpTargetParamsMPModel OBJECT-TYPE + SYNTAX SnmpMessageProcessingModel + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Message Processing Model to be used when generating + SNMP messages using this entry." + ::= { snmpTargetParamsEntry 2 } + + snmpTargetParamsSecurityModel OBJECT-TYPE + SYNTAX SnmpSecurityModel (1..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Security Model to be used when generating SNMP + messages using this entry. An implementation may + choose to return an inconsistentValue error if an + attempt is made to set this variable to a value + for a security model which the implementation does + not support." + ::= { snmpTargetParamsEntry 3 } + + snmpTargetParamsSecurityName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The securityName which identifies the Principal on + whose behalf SNMP messages will be generated using + this entry." + ::= { snmpTargetParamsEntry 4 } + + snmpTargetParamsSecurityLevel OBJECT-TYPE + SYNTAX SnmpSecurityLevel + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Level of Security to be used when generating + SNMP messages using this entry." + ::= { snmpTargetParamsEntry 5 } + + snmpTargetParamsStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row." + DEFVAL { nonVolatile } + ::= { snmpTargetParamsEntry 6 } + + snmpTargetParamsRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. + + To create a row in this table, a manager must + set this object to either createAndGo(4) or + createAndWait(5). + + Until instances of all corresponding columns are + appropriately configured, the value of the + corresponding instance of the snmpTargetParamsRowStatus + column is 'notReady'. + + In particular, a newly created row cannot be made + active until the corresponding + snmpTargetParamsMPModel, + snmpTargetParamsSecurityModel, + snmpTargetParamsSecurityName, + and snmpTargetParamsSecurityLevel have all been set. + + The following objects may not be modified while the + value of this object is active(1): + - snmpTargetParamsMPModel + - snmpTargetParamsSecurityModel + - snmpTargetParamsSecurityName + - snmpTargetParamsSecurityLevel + An attempt to set these objects while the value of + snmpTargetParamsRowStatus is active(1) will result in + an inconsistentValue error." + ::= { snmpTargetParamsEntry 7 } + + snmpUnavailableContexts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received by the SNMP + engine which were dropped because the context + contained in the message was unavailable." + ::= { snmpTargetObjects 4 } + + snmpUnknownContexts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received by the SNMP + engine which were dropped because the context + contained in the message was unknown." + ::= { snmpTargetObjects 5 } + + -- + -- + -- Conformance information + -- + -- + + snmpTargetCompliances OBJECT IDENTIFIER ::= + { snmpTargetConformance 1 } + snmpTargetGroups OBJECT IDENTIFIER ::= + { snmpTargetConformance 2 } + + -- + -- + -- Compliance statements + -- + -- + snmpTargetCommandResponderCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities which include + a command responder application." + MODULE -- This Module + MANDATORY-GROUPS { snmpTargetCommandResponderGroup } + ::= { snmpTargetCompliances 1 } + + snmpTargetBasicGroup OBJECT-GROUP + OBJECTS { + snmpTargetSpinLock, + snmpTargetAddrTDomain, + snmpTargetAddrTAddress, + snmpTargetAddrTagList, + snmpTargetAddrParams, + snmpTargetAddrStorageType, + snmpTargetAddrRowStatus, + snmpTargetParamsMPModel, + snmpTargetParamsSecurityModel, + snmpTargetParamsSecurityName, + snmpTargetParamsSecurityLevel, + snmpTargetParamsStorageType, + snmpTargetParamsRowStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing basic remote + configuration of management targets." + ::= { snmpTargetGroups 1 } + + snmpTargetResponseGroup OBJECT-GROUP + OBJECTS { + snmpTargetAddrTimeout, + snmpTargetAddrRetryCount + } + STATUS current + DESCRIPTION + "A collection of objects providing remote configuration + of management targets for applications which generate + SNMP messages for which a response message would be + expected." + ::= { snmpTargetGroups 2 } + + snmpTargetCommandResponderGroup OBJECT-GROUP + OBJECTS { + snmpUnavailableContexts, + snmpUnknownContexts + } + STATUS current + DESCRIPTION + "A collection of objects required for command responder + applications, used for counting error conditions." + ::= { snmpTargetGroups 3 } + + END -- cgit v1.2.3