Building and Installing Erlang/OTP ================================== Introduction ------------ This document describes how to build and install Erlang/OTP-%OTP-REL%. You are advised to read the whole document before attempting to build and install Erlang/OTP. You can find more information about Open Source Erlang/OTP at: <http://www.erlang.org/> The source code for Erlang/OTP can also be found in a Git repository: <http://github.com/erlang/otp> Erlang/OTP should be possible to build from source on any Unix system, including Mac OS X. This document describes how to native compile Erlang/OTP on Unix. For detailed instructions on how to * cross compile Erlang/OTP, see the [$ERL_TOP/INSTALL-CROSS.md][] document. * build Erlang/OTP on Windows, see the [$ERL_TOP/INSTALL-WIN32.md][] document. Binary releases for Windows can be found at <http://www.erlang.org/download.html>. Before reading the above mentioned documents you are in any case advised to read this document first, since it covers building Erlang/OTP in general as well as other important information. Daily Build and Test -------------------- At Ericsson we have a "Daily Build and Test" that runs on: * Solaris 8, 9 * Sparc32 * Sparc64 * Solaris 10 * Sparc32 * Sparc64 * x86 * SuSE Linux/GNU 9.4, 10.1 * x86 * SuSE Linux/GNU 10.0, 10.1, 11.0 * x86 * x86\_64 * openSuSE 11.4 (Celadon) * x86\_64 (valgrind) * Fedora 7 * PowerPC * Fedora 14 * x86\_64 * Gentoo Linux/GNU 1.12.11.1 * x86 * Ubuntu Linux/GNU 7.04, 10.04, 10.10, 11.0 * x86\_64 * MontaVista Linux/GNU 4.0.1 * PowerPC * FreeBSD 8.2 * x86 * OpenBSD 5.0 * x86\_64 * Mac OS X 10.5.8 (Leopard), 10.6.0 (Snow Leopard), 10.7.3 (Lion) * x86 * Windows XP SP3, 2003, Vista, 7 * x86 * Windows 7 * x86\_64 We also have the following "Daily Cross Builds": * SuSE Linux/GNU 10.1 x86 -> SuSE Linux/GNU 10.1 x86\_64 * SuSE Linux/GNU 10.1 x86\_64 -> Linux/GNU TILEPro64 and the following "Daily Cross Build Tests": * SuSE Linux/GNU 10.1 x86\_64 Versions Known NOT to Work -------------------------- * Suse linux 9.1 is shipped with a patched GCC version 3.3.3, having the rpm named `gcc-3.3.3-41`. That version has a serious optimization bug that makes it unusable for building the Erlang emulator. Please upgrade GCC to a newer version before building on Suse 9.1. Suse Linux Enterprise edition 9 (SLES9) has `gcc-3.3.3-43` and is not affected. * `gcc-4.3.0` has a serious optimizer bug. It produces an Erlang emulator that will crash immediately. The bug is supposed to be fixed in `gcc-4.3.1`. * FreeBSD had a bug which caused `kqueue`/`poll`/`select` to fail to detect that a `writev()` on a pipe has been made. This bug should have been fixed in FreeBSD 6.3 and FreeBSD 7.0. NetBSD and DragonFlyBSD probably have or have had the same bug. More information can be found at: * <http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/kern/sys_pipe.c> * <http://lists.freebsd.org/pipermail/freebsd-arch/2007-September/006790.html> * `getcwd()` on Solaris 9 can cause an emulator crash. If you have async-threads enabled you can increase the stack size of the async-threads as a temporary workaround. See the `+a` command-line argument in the documentation of `erl(1)`. Without async-threads the emulator is not as vulnerable to this bug, but if you hit it without async-threads the only workaround available is to enable async-threads and increase the stack size of the async-threads. Sun has however released patches that fixes the issue: > Problem Description: 6448300 large mnttab can cause stack overrun > during Solaris 9 getcwd More information can be found at: * <http://sunsolve.sun.com/search/document.do?assetkey=1-21-112874-40-1&searchclause=6448300> * <http://sunsolve.sun.com/search/document.do?assetkey=1-21-114432-29-1&searchclause=6448300> Required Utilities ------------------ These are the tools you will need in order to unpack and build Erlang/OTP. ### Unpacking ### * GNU unzip, or a modern uncompress. * A TAR program that understands the GNU TAR format for long filenames (such as GNU TAR). ### Building ### * GNU `make` * `gcc` -- GNU C compiler * Perl 5 * GNU `m4` -- If HiPE (native code) support is enabled. HiPE can be disabled using `--disable-hipe` * `ncurses`, `termcap`, or `termlib` -- The development headers and libraries are needed, often known as `ncurses-devel`. Use `--without-termcap` to build without any of these libraries. Note that in this case only the old shell (without any line editing) can be used. * OpenSSL -- Optional, but needed for building the Erlang/OTP applications `ssl` and `crypto`. You need the "development package" of OpenSSL, i.e. including the header files. For building the application `ssl` the OpenSSL binary command program `openssl` is also needed. At least version 0.9.8 of OpenSSL is required. Can be downloaded from <http://www.openssl.org>. * Sun Java jdk-1.5.0 or higher -- Optional but needed for building the Erlang/OTP application `jinterface` and parts of `ic` and `orber`. Can be downloaded from <http://java.sun.com>. We have also tested IBM's JDK 1.5.0. * X Windows -- Optional, but development headers and libraries are needed to build the Erlang/OTP application `gs` on Unix/Linux. * `sed` -- There seem to be some problems with some of the `sed` version on Solaris. Make sure `/bin/sed` or `/usr/bin/sed` is used on the Solaris platform. * `flex` -- Optional, headers and libraries are needed to build the `flex` scanner for the `megaco` application on Unix/Linux. #### Building Documentation #### * `xsltproc` -- XSLT processor. A tool for applying XSLT stylesheets to XML documents. Can be downloaded from <http://xmlsoft.org/XSLT/xsltproc2.html>. * `fop` -- Apache FOP print formatter (requires Java). Can be downloaded from <http://xmlgraphics.apache.org/fop>. #### Building in Git #### * GNU `autoconf` of at least version 2.59. Note that `autoconf` is not needed when building an unmodified version of the released source. ### Installing ### * An `install` program that can take multiple file names. How to Build and Install Erlang/OTP ----------------------------------- The following instructions are for building [the released source tar ball][]. The variable `$ERL_TOP` will be mentioned a lot of times. It refers to the top directory in the source tree. More information about `$ERL_TOP` can be found in the [make and $ERL_TOP][] section below. If you are building in git you probably want to take a look at the [Building in Git][] section below before proceeding. ### Unpacking ### Step 1: Start by unpacking the Erlang/OTP distribution file with your GNU compatible TAR program. $ gunzip -c otp_src_%OTP-REL%.tar.gz | tar xf - alternatively: $ zcat otp_src_%OTP-REL%.tar.gz | tar xf - Step 2: Now cd into the base directory (`$ERL_TOP`). $ cd otp_src_%OTP-REL% ### Configuring ### Step 3: On some platforms Perl may behave strangely if certain locales are set, so optionally you may need to set the LANG variable: # Bourne shell $ LANG=C; export LANG or # C-Shell $ setenv LANG C Step 4: Run the following commands to configure the build: $ ./configure [ options ] By default, Erlang/OTP will be installed in `/usr/local/{bin,lib/erlang}`. To instead install in `<BaseDir>/{bin,lib/erlang}`, use the `--prefix=<BaseDir>` option. If you upgraded the source with some patch you may need to clean up from previous builds before the new build. Before doing a `make clean`, be sure to read the [Pre-built Source Release][] section below. ### Building ### Step 5: Build the Erlang/OTP package. $ make ### Installing ### Step 6: Install then Erlang/OTP package $ make install ### A Closer Look at the individual Steps ### Let us go through them in some detail. #### Configuring #### Step 4 runs a configuration script created by the GNU autoconf utility, which checks for system specific features and then creates a number of makefiles. The configure script allows you to customize a number of parameters; type `./configure --help` or `./configure --help=recursive` for details. `./configure --help=recursive` will give help for all `configure` scripts in all applications. One of the things you can specify is where Erlang/OTP should be installed. By default Erlang/OTP will be installed in `/usr/local/{bin,lib/erlang}`. To keep the same structure but install in a different place, `<Dir>` say, use the `--prefix` argument like this: `./configure --prefix=<Dir>`. Some of the available `configure` options are: * `--prefix=PATH` - Specify installation prefix. * `--{enable,disable}-threads` - Thread support (enabled by default if possible) * `--{enable,disable}-smp-support` - SMP support (enabled by default if possible) * `--{enable,disable}-kernel-poll` - Kernel poll support (enabled by default if possible) * `--{enable,disable}-hipe` - HiPE support (enabled by default on supported platforms) * `--enable-darwin-universal` - Build universal binaries on darwin i386. * `--enable-darwin-64bit` - Build 64-bit binaries on darwin * `--enable-m64-build` - Build 64-bit binaries using the `-m64` flag to `(g)cc` * `--enable-m32-build` - Build 32-bit binaries using the `-m32` flag to `(g)cc` * `--{with,without}-termcap` - termcap (without implies that only the old Erlang shell can be used) * `--with-javac=JAVAC` - Specify Java compiler to use * `--{with,without}-javac` - Java compiler (without implies that the `jinterface` application won't be built) * `--{enable,disable}-dynamic-ssl-lib` - Dynamic OpenSSL libraries * `--{enable,disable}-shared-zlib` - Shared zlib library * `--with-ssl=PATH` - Specify location of OpenSSL include and lib * `--{with,without}-ssl` - OpenSSL (without implies that the `crypto`, `ssh`, and `ssl` won't be built) * `--with-libatomic_ops=PATH` - Use the `libatomic_ops` library for atomic memory accesses. If `configure` should inform you about no native atomic implementation available, you typically want to try using the `libatomic_ops` library. It can be downloaded from <http://www.hpl.hp.com/research/linux/atomic_ops/>. If you or your system has special requirements please read the `Makefile` for additional configuration information. #### Building #### Step 5 builds the Erlang/OTP system. On a fast computer, this will take about 5 minutes. After completion of this step, you should have a working Erlang/OTP system which you can try by typing `bin/erl`. This should start up Erlang/OTP and give you a prompt: $ bin/erl Erlang %OTP-REL% (erts-%ERTS-VSN%) [source] [smp:4:4] [rq:4] [async-threads:0] [kernel-poll:false] Eshell V%ERTS-VSN% (abort with ^G) 1> _ #### Installing #### Step 6 is optional. It installs Erlang/OTP at a standardized location (if you change your mind about where you wish to install you can rerun step 4, without having to do step 5 again). ##### Alternative Installation Procedures ##### * Staged install using [DESTDIR][]. You can perform the install phase in a temporary directory and later move the installation into its correct location by use of the `DESTDIR` variable: $ make DESTDIR=<tmp install dir> install The installation will be created in a location prefixed by `$DESTDIR`. It can, however, not be run from there. It needs to be moved into the correct location before it can be run. If `DESTDIR` have not been set but `INSTALL_PREFIX` has been set, `DESTDIR` will be set to `INSTALL_PREFIX`. Note that `INSTALL_PREFIX` in pre R13B04 was buggy and behaved as `EXTRA_PREFIX` (see below). There are lots of areas of use for an installation procedure using `DESTDIR`, e.g. when creating a package, cross compiling, etc. Here is an example where the installation should be located under `/opt/local`: $ ./configure --prefix=/opt/local $ make $ make DESTDIR=/tmp/erlang-build install $ cd /tmp/erlang-build/opt/local $ # gnu-tar is used in this example $ tar -zcf /home/me/my-erlang-build.tgz * $ su - Password: ***** $ cd /opt/local $ tar -zxf /home/me/my-erlang-build.tgz * Install using the `release` target. Instead of doing `make install` you can create the installation in whatever directory you like using the `release` target and run the `Install` script yourself. `RELEASE_ROOT` is used for specifying the directory where the installation should be created. This is what by default ends up under `/usr/local/lib/erlang` if you do the install using `make install`. All installation paths provided in the `configure` phase are ignored, as well as `DESTDIR`, and `INSTALL_PREFIX`. If you want links from a specific `bin` directory to the installation you have to set those up yourself. An example where Erlang/OTP should be located at `/home/me/OTP`: $ ./configure $ make $ make RELEASE_ROOT=/home/me/OTP release $ cd /home/me/OTP $ ./Install -minimal /home/me/OTP $ mkdir -p /home/me/bin $ cd /home/me/bin $ ln -s /home/me/OTP/bin/erl erl $ ln -s /home/me/OTP/bin/erlc erlc $ ln -s /home/me/OTP/bin/escript escript ... The `Install` script should currently be invoked as follows in the directory where it resides (the top directory): $ ./Install [-cross] [-minimal|-sasl] <ERL_ROOT> where: * `-minimal` Creates an installation that starts up a minimal amount of applications, i.e., only `kernel` and `stdlib` are started. The minimal system is normally enough, and is what `make install` uses. * `-sasl` Creates an installation that also starts up the `sasl` application. * `-cross` For cross compilation. Informs the install script that it is run on the build machine. * `<ERL_ROOT>` - The absolute path to the Erlang installation to use at run time. This is often the same as the current working directory, but does not have to be. It can follow any other path through the file system to the same directory. If neither `-minimal`, nor `-sasl` is passed as argument you will be prompted. * Test install using `EXTRA_PREFIX`. The content of the `EXTRA_PREFIX` variable will prefix all installation paths when doing `make install`. Note that `EXTRA_PREFIX` is similar to `DESTDIR`, but it does *not* have the same effect as `DESTDIR`. The installation can and have to be run from the location specified by `EXTRA_PREFIX`. That is, it can be useful if you want to try the system out, running test suites, etc, before doing the real install without `EXTRA_PREFIX`. ### Symbolic Links in --bindir ### When doing `make install` and the default installation prefix is used, relative symbolic links will be created from `/usr/local/bin` to all public Erlang/OTP executables in `/usr/local/lib/erlang/bin`. The installation phase will try to create relative symbolic links as long as `--bindir` and the Erlang bin directory, located under `--libdir`, both have `--exec-prefix` as prefix. Where `--exec-prefix` defaults to `--prefix`. `--prefix`, `--exec-prefix`, `--bindir`, and `--libdir` are all arguments that can be passed to `configure`. One can force relative, or absolute links by passing `BINDIR_SYMLINKS=relative|absolute` as arguments to `make` during the install phase. Note that such a request might cause a failure if the request cannot be satisfied. ### Pre-built Source Release ### The source release is delivered with a lot of platform independent build results already pre-built. If you want to remove these pre-built files, invoke `./otp_build remove_prebuilt_files` from the `$ERL_TOP` directory. After you have done this, you can build exactly the same way as before, but the build process will take a much longer time. > *WARNING*: Doing `make clean` in an arbitrary directory of the source > tree, may remove files needed for bootstrapping the build. > > Doing `./otp_build save_bootstrap` from the `$ERL_TOP` directory before > doing `make clean` will ensure that it will be possible to build after > doing `make clean`. `./otp_build save_bootstrap` will be invoked > automatically when `make` is invoked from `$ERL_TOP` with either the > `clean` target, or the default target. It is also automatically invoked > if `./otp_build remove_prebuilt_files` is invoked. ### Building in Git ### When building in a Git working directory you also have to have a GNU `autoconf` of at least version 2.59 on your system, because you need to generate the `configure` scripts before you can start building. The `configure` scripts are generated by invoking `./otp_build autoconf` in the `$ERL_TOP` directory. The `configure` scripts also have to be regenerated when a `configure.in` or `aclocal.m4` file has been modified. Note that when checking out a branch a `configure.in` or `aclocal.m4` file may change content, and you may therefore have to regenerate the `configure` scripts when checking out a branch. Regenerated `configure` scripts imply that you have to run `configure` and build again. > *NOTE*: Running `./otp_build autoconf` is **not** needed when building > an unmodified version of the released source. Other useful information can be found at our github wiki: <http://wiki.github.com/erlang/otp> ### make and $ERL\_TOP ### All the makefiles in the entire directory tree use the environment variable `ERL_TOP` to find the absolute path of the installation. The `configure` script will figure this out and set it in the top level Makefile (which, when building, it will pass on). However, when developing it is sometimes convenient to be able to run make in a subdirectory. To do this you must set the `ERL_TOP` variable before you run make. For example, assume your GNU make program is called `make` and you want to rebuild the application `STDLIB`, then you could do: $ cd lib/stdlib; env ERL_TOP=<Dir> make where `<Dir>` would be what you find `ERL_TOP` is set to in the top level Makefile. The Erlang/OTP Documentation ---------------------------- ### How to Build the Documentation ### $ cd $ERL_TOP If you have just built Erlang/OTP in the current source tree, you have already ran `configure` and do not need to do this again; otherwise, run `configure`. $ ./configure [Configure Args] When building the documentation you need a full Erlang/OTP-%OTP-REL% system in the `$PATH`. $ export PATH=<Erlang/OTP-%OTP-REL% bin dir>:$PATH # Assuming bash/sh Build the documentation. $ make docs The documentation can be installed either using the `install-docs` target, or using the `release_docs` target. * If you have installed Erlang/OTP using the `install` target, install the documentation using the `install-docs` target. Install locations determined by `configure` will be used. `$DESTDIR` can be used the same way as when doing `make install`. $ make install-docs * If you have installed Erlang/OTP using the `release` target, install the documentation using the `release_docs` target. You typically want to use the same `RELEASE_ROOT` as when invoking `make release`. $ make release_docs RELEASE_ROOT=<release dir> #### Build Issues #### We have sometimes experienced problems with Sun's `java` running out of memory when running `fop`. Increasing the amount of memory available as follows has in our case solved the problem. $ export FOP_OPTS="-Xmx<Installed amount of RAM in MB>m" More information can be found at <http://xmlgraphics.apache.org/fop/0.95/running.html#memory>. ### How to Install the Pre-formatted Documentation ### Pre-formatted [html documentation][] and [man pages][] can be downloaded at <http://www.erlang.org/download.html>. For some graphical tools to find the on-line help you have to install the HTML documentation on top of the installed OTP applications, i.e. $ cd <ReleaseDir> $ gunzip -c otp_html_%OTP-REL%.tar.gz | tar xf - For `erl -man <page>` to work the Unix manual pages have to be installed in the same way, i.e. $ cd <ReleaseDir> $ gunzip -c otp_man_%OTP-REL%.tar.gz | tar xf - Where `<ReleaseDir>` is * `<PrefixDir>/lib/erlang` if you have installed Erlang/OTP using `make install`. * `$DESTDIR<PrefixDir>/lib/erlang` if you have installed Erlang/OTP using `make install DESTDIR=<TmpInstallDir>`. * `RELEASE_ROOT` if you have installed using `make release RELEASE_ROOT=<ReleaseDir>`. Support for SMP (Symmetric Multi Processing) -------------------------------------------- An emulator with SMP support will be built by default on most platforms if a usable POSIX thread library or native Windows threads is found. You can force building of an SMP emulator, by using `./configure --enable-smp-support`. However, if configure does not automatically enable SMP support, the build is very likely to fail. Use `./configure --disable-smp-support` if you for some reason do not want to have the emulator with SMP support built. If SMP support is enabled, support for threaded I/O will also be turned on (also in the emulator without SMP support). The `erl` command will automatically start the SMP emulator if the computer has more than one logical processor. You can force a start of the emulator with SMP support by passing `-smp enable` as command line arguments to erl, and you can force a start of the emulator without SMP support by passing `-smp disable`. GS (Graphic System) ------------------- GS now Tcl/Tk 8.4. It will be searched for when starting GS. Using HiPE ---------- HiPE supports the following system configurations: * x86: All 32-bit and 64-bit mode processors should work. * Linux: Fedora Core is supported. Both 32-bit and 64-bit modes are supported. NPTL glibc is strongly preferred, or a LinuxThreads glibc configured for "floating stacks". Old non-floating stacks glibcs have a fundamental problem that makes HiPE support and threads support mutually exclusive. * Solaris: Solaris 10 (32-bit and 64-bit) and 9 (32-bit) are supported. The build requires a version of the GNU C compiler (gcc) that has been configured to use the GNU assembler (gas). Sun's x86 assembler is emphatically **not** supported. * FreeBSD: FreeBSD 6.1 and 6.2 in 32-bit and 64-bit modes should work. * MacOSX/Darwin: Darwin 9.8.0 in 32-bit mode should work. * PowerPC: All 32-bit 6xx/7xx(G3)/74xx(G4) processors should work. 32-bit mode on 970 (G5) and POWER5 processors should work. * Linux (Yellow Dog) and Mac OSX 10.4 are supported. * SPARC: All UltraSPARC processors running 32-bit user code should work. * Solaris 9 is supported. The build requires a `gcc` that has been configured to use Sun's assembler and linker. Using the GNU assembler but Sun's linker has been known to cause problems. * Linux (Aurora) is supported. * ARM: ARMv5TE (i.e. XScale) processors should work. Both big-endian and little-endian modes are supported. * Linux is supported. HiPE is automatically enabled on the following systems: * x86 in 32-bit mode: Linux, Solaris, FreeBSD * x86 in 64-bit mode: Linux, Solaris, FreeBSD * PowerPC: Linux, MacOSX * SPARC: Linux * ARM: Linux On other supported systems you need to `./configure --enable-hipe`. If you are running on a platform supporting HiPE and if you have not disabled HiPE, you can compile a module into native code like this from the Erlang shell: 1> c(Module, native). or 1> c(Module, [native|OtherOptions]). Using the erlc program, write like this: $ erlc +native Module.erl The native code will be placed into the beam file and automatically loaded when the beam file is loaded. To add hipe options, write like this from the Erlang shell: 1> c(Module, [native,{hipe,HipeOptions}|MoreOptions]). Use `hipe:help_options/0` to print out the available options. 1> hipe:help_options(). Mac OS X (Darwin) ----------------- Make sure that the command `hostname` returns a valid fully qualified host name (this is configured in `/etc/hostconfig`). If you develop linked-in drivers (shared library) you need to link using `gcc` and the flags `-bundle -flat_namespace -undefined suppress`. You also include `-fno-common` in `CFLAGS` when compiling. Use `.so` as the library suffix. Use the `--enable-darwin-64bit` configure flag to build a 64-bit binaries on Mac OS X. Building universal binaries on Mac OS X (obsolete information) -------------------------------------------------------------- (This information was written when Mac OS X Leopard was the current release. It may no longer work.) Universal 32bit binaries can be built on an Intel Mac using the `--enable-darwin-universal` configure option. There still may occur problems with certain applications using this option, but the base system should run smoothly. When building universal binaries on a PowerPC Mac (at least on Tiger), you must point out a suitable SDK that contains universal binaries. For instance, to build universal binaries for Tiger (10.4): $ CFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk" \ LDFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk" \ ./configure --enable-darwin-universal Also, if you run Leopard, but want to build for Tiger, you must do by setting the `MACOSX_DEPLOYMENT_TARGET` environmental variable. $ export MACOSX_DEPLOYMENT_TARGET=10.4 Experimental support for 64bit x86 darwin binaries can be enabled using the `--enable-darwin-64bit` configure flag. The 64bit binaries are best built and run on Leopard, but most of the system also works on Tiger (Tiger's 64bit libraries are, however, limited; therefore e.g. `odbc`, `crypto`, `ssl` etc. are not supported in Tiger). 64bit PPC binaries are not supported and we have no plans to add such support (no machines to test on). Universal binaries and 64bit binaries are mutually exclusive options. Building a fast Erlang VM on Mac OS Lion ---------------------------------------- Starting with Xcode 4.2, Apple no longer includes a "real" `gcc` compiler (not based on the LLVM). Building with `llvm-gcc` or `clang` will work, but the performance of the Erlang run-time system will not be the best possible. Note that if you have `gcc-4.2` installed and included in `PATH` (from a previous version of Xcode), `configure` will automatically make sure that `gcc-4.2` will be used to compile `beam_emu.c` (the source file most in need of `gcc`). If you don't have `gcc-4.2.` and want to build a run-time system with the best possible performance, do like this: Install Xcode from the AppStore if it is not already installed. If you have Xcode 4.3, or later, you will also need to download "Command Line Tools" via the Downloads preference pane in Xcode. Some tools may still be lacking or out-of-date, we recommend using [Homebrew](https://github.com/mxcl/homebrew/wiki/installation) or Macports to update those tools. Install MacPorts (<http://www.macports.org/>). Then: $ sudo port selfupdate $ sudo port install gcc45 +universal ### Building with wxErlang ### If you want to build the `wx` application, you will need to get wxMac-2.8.12 (`wxMac-2.8.12.tar.gz` from <http://sourceforge.net/projects/wxwindows/files/2.8.12/>) and install it. Export the path for MacOSX10.6.sdk: $ export SDK=/Developer/SDKs/MacOSX10.6.sdk In Xcode 4.3 the path has changed so use the following instead, $ export SDK=/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.6.sdk Then configure and build wxMac: $ arch_flags="-arch i386" ./configure CFLAGS="$arch_flags" CXXFLAGS="$arch_flags" CPPFLAGS="$arch_flags" LDFLAGS="$arch_flags" OBJCFLAGS="$arch_flags" OBJCXXFLAGS="$arch_flags" --prefix=/usr/local --with-macosx-sdk="$SDK" --with-macosx-version-min=10.6 --enable-unicode --with-opengl --disable-shared $ make $ sudo make install To link wx properly you will also need to build and install `wxStyledTextCtrl`: $ cd contrib/src/stc $ make $ sudo make install ### Finish up ### Build Erlang with the MacPorts GCC as the main compiler (using `clang` for the Objective-C Cocoa code in the `wx` application): $ PATH=/usr/local/bin:$PATH CC=/opt/local/bin/gcc-mp-4.5 CXX=/opt/local/bin/g++-mp-4.5 ./configure --enable-m32-build make $ sudo make install How to Build a Debug Enabled Erlang RunTime System -------------------------------------------------- After completing all the normal building steps described above a debug enabled runtime system can be built. To do this you have to change directory to `$ERL_TOP/erts/emulator`. In this directory execute: $ make debug FLAVOR=$FLAVOR where `$FLAVOR` is either `plain` or `smp`. The flavor options will produce a beam.debug and beam.smp.debug executable respectively. The files are installed along side with the normal (opt) versions `beam.smp` and `beam`. To start the debug enabled runtime system execute: $ $ERL_TOP/bin/cerl -debug The debug enabled runtime system features lock violation checking, assert checking and various sanity checks to help a developer ensure correctness. Some of these features can be enabled on a normal beam using appropriate configure options. There are other types of runtime systems that can be built as well using the similar steps just described. $ make $TYPE FLAVOR=$FLAVOR where `$TYPE` is `opt`, `gcov`, `gprof`, `debug`, `valgrind`, or `lcnt`. These different beam types are useful for debugging and profiling purposes. Authors ------- Authors are mostly listed in the application's `AUTHORS` files, that is `$ERL_TOP/lib/*/AUTHORS` and `$ERL_TOP/erts/AUTHORS`, not in the individual source files. Copyright and License --------------------- %CopyrightBegin% Copyright Ericsson AB 1998-2012. All Rights Reserved. The contents of this file are subject to the Erlang Public License, Version 1.1, (the "License"); you may not use this file except in compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. %CopyrightEnd% More Information ---------------- More information can be found at <http://www.erlang.org>. Modifying This Document ----------------------- Before modifying this document you need to have a look at the `$ERL_TOP/README.md.txt` document. [$ERL_TOP/INSTALL-CROSS.md]: INSTALL-CROSS [$ERL_TOP/INSTALL-WIN32.md]: INSTALL-WIN32 [DESTDIR]: http://www.gnu.org/prep/standards/html_node/DESTDIR.html [Building in Git]: #How-to-Build-and-Install-ErlangOTP_Building-in-Git [Pre-built Source Release]: #How-to-Build-and-Install-ErlangOTP_Prebuilt-Source-Release [make and $ERL_TOP]: #How-to-Build-and-Install-ErlangOTP_make-and-ERLTOP [html documentation]: http://www.erlang.org/download/otp_doc_html_%OTP-REL%.tar.gz [man pages]: http://www.erlang.org/download/otp_doc_man_%OTP-REL%.tar.gz [the released source tar ball]: http://www.erlang.org/download/otp_src_%OTP-REL%.tar.gz [?TOC]: true