20012016 Ericsson AB. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. erl_nif Sverker Eriksson Sverker Eriksson 1 2009-11-17 PA1 erl_nif.xml
erl_nif API functions for an Erlang NIF library

A NIF library contains native implementation of some functions of an Erlang module. The native implemented functions (NIFs) are called like any other functions without any difference to the caller. Each NIF must also have an implementation in Erlang that will be invoked if the function is called before the NIF library has been successfully loaded. A typical such stub implementation is to throw an exception. But it can also be used as a fallback implementation if the NIF library is not implemented for some architecture.

Use this functionality with extreme care!

A native function is executed as a direct extension of the native code of the VM. Execution is not made in a safe environment. The VM can not provide the same services as provided when executing Erlang code, such as preemptive scheduling or memory protection. If the native function doesn't behave well, the whole VM will misbehave.

A native function that crash will crash the whole VM.

An erroneously implemented native function might cause a VM internal state inconsistency which may cause a crash of the VM, or miscellaneous misbehaviors of the VM at any point after the call to the native function.

A native function that do lengthy work before returning will degrade responsiveness of the VM, and may cause miscellaneous strange behaviors. Such strange behaviors include, but are not limited to, extreme memory usage, and bad load balancing between schedulers. Strange behaviors that might occur due to lengthy work may also vary between OTP releases.

A minimal example of a NIF library can look like this:

/* niftest.c */ #include "erl_nif.h" static ERL_NIF_TERM hello(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) { return enif_make_string(env, "Hello world!", ERL_NIF_LATIN1); } static ErlNifFunc nif_funcs[] = { {"hello", 0, hello} }; ERL_NIF_INIT(niftest,nif_funcs,NULL,NULL,NULL,NULL)

and the Erlang module would have to look something like this:

-module(niftest). -export([init/0, hello/0]). init() -> erlang:load_nif("./niftest", 0). hello() -> "NIF library not loaded".

and compile and test something like this (on Linux):

$> gcc -fPIC -shared -o niftest.so niftest.c -I $ERL_ROOT/usr/include/ $> erl 1> c(niftest). {ok,niftest} 2> niftest:hello(). "NIF library not loaded" 3> niftest:init(). ok 4> niftest:hello(). "Hello world!"

A better solution for a real module is to take advantage of the new directive on_load to automatically load the NIF library when the module is loaded.

A NIF does not have to be exported, it can be local to the module. Note however that unused local stub functions will be optimized away by the compiler causing loading of the NIF library to fail.

A loaded NIF library is tied to the Erlang module code version that loaded it. If the module is upgraded with a new version, the new Erlang code will have to load its own NIF library (or maybe choose not to). The new code version can however choose to load the exact same NIF library as the old code if it wants to. Sharing the same dynamic library will mean that static data defined by the library will be shared as well. To avoid unintentionally shared static data, each Erlang module code can keep its own private data. This private data can be set when the NIF library is loaded and then retrieved by calling enif_priv_data.

There is no way to explicitly unload a NIF library. A library will be automatically unloaded when the module code that it belongs to is purged by the code server.

As mentioned in the warning text at the beginning of this document it is of vital importance that a native function return relatively quickly. It is hard to give an exact maximum amount of time that a native function is allowed to work, but as a rule of thumb a well-behaving native function should return to its caller before a millisecond has passed. This can be achieved using different approaches. If you have full control over the code to execute in the native function, the best approach is to divide the work into multiple chunks of work and call the native function multiple times, either directly from Erlang code or by having a native function schedule a future NIF call via the enif_schedule_nif function. Function enif_consume_timeslice can be used to help with such work division. In some cases, however, this might not be possible, e.g. when calling third-party libraries. Then you typically want to dispatch the work to another thread, return from the native function, and wait for the result. The thread can send the result back to the calling thread using message passing. Information about thread primitives can be found below. If you have built your system with the currently experimental support for dirty schedulers, you may want to try out this functionality by dispatching the work to a dirty NIF, which does not have the same duration restriction as a normal NIF.

FUNCTIONALITY

All functions that a NIF library needs to do with Erlang are performed through the NIF API functions. There are functions for the following functionality:

Read and write Erlang terms

Any Erlang terms can be passed to a NIF as function arguments and be returned as function return values. The terms are of C-type ERL_NIF_TERM and can only be read or written using API functions. Most functions to read the content of a term are prefixed enif_get_ and usually return true (or false) if the term was of the expected type (or not). The functions to write terms are all prefixed enif_make_ and usually return the created ERL_NIF_TERM. There are also some functions to query terms, like enif_is_atom, enif_is_identical and enif_compare.

All terms of type ERL_NIF_TERM belong to an environment of type ErlNifEnv. The lifetime of a term is controlled by the lifetime of its environment object. All API functions that read or write terms has the environment, that the term belongs to, as the first function argument.

Binaries

Terms of type binary are accessed with the help of the struct type ErlNifBinary that contains a pointer (data) to the raw binary data and the length (size) of the data in bytes. Both data and size are read-only and should only be written using calls to API functions. Instances of ErlNifBinary are however always allocated by the user (usually as local variables).

The raw data pointed to by data is only mutable after a call to enif_alloc_binary or enif_realloc_binary. All other functions that operates on a binary will leave the data as read-only. A mutable binary must in the end either be freed with enif_release_binary or made read-only by transferring it to an Erlang term with enif_make_binary. But it does not have to happen in the same NIF call. Read-only binaries do not have to be released.

enif_make_new_binary can be used as a shortcut to allocate and return a binary in the same NIF call.

Binaries are sequences of whole bytes. Bitstrings with an arbitrary bit length have no support yet.

Resource objects

The use of resource objects is a safe way to return pointers to native data structures from a NIF. A resource object is just a block of memory allocated with enif_alloc_resource. A handle ("safe pointer") to this memory block can then be returned to Erlang by the use of enif_make_resource. The term returned by enif_make_resource is totally opaque in nature. It can be stored and passed between processes on the same node, but the only real end usage is to pass it back as an argument to a NIF. The NIF can then call enif_get_resource and get back a pointer to the memory block that is guaranteed to still be valid. A resource object will not be deallocated until the last handle term has been garbage collected by the VM and the resource has been released with enif_release_resource (not necessarily in that order).

All resource objects are created as instances of some resource type. This makes resources from different modules to be distinguishable. A resource type is created by calling enif_open_resource_type when a library is loaded. Objects of that resource type can then later be allocated and enif_get_resource verifies that the resource is of the expected type. A resource type can have a user supplied destructor function that is automatically called when resources of that type are released (by either the garbage collector or enif_release_resource). Resource types are uniquely identified by a supplied name string and the name of the implementing module.

Here is a template example of how to create and return a resource object.

ERL_NIF_TERM term; MyStruct* obj = enif_alloc_resource(my_resource_type, sizeof(MyStruct)); /* initialize struct ... */ term = enif_make_resource(env, obj); if (keep_a_reference_of_our_own) { /* store 'obj' in static variable, private data or other resource object */ } else { enif_release_resource(obj); /* resource now only owned by "Erlang" */ } return term;

Note that once enif_make_resource creates the term to return to Erlang, the code can choose to either keep its own native pointer to the allocated struct and release it later, or release it immediately and rely solely on the garbage collector to eventually deallocate the resource object when it collects the term.

Another usage of resource objects is to create binary terms with user defined memory management. enif_make_resource_binary will create a binary term that is connected to a resource object. The destructor of the resource will be called when the binary is garbage collected, at which time the binary data can be released. An example of this can be a binary term consisting of data from a mmap'ed file. The destructor can then do munmap to release the memory region.

Resource types support upgrade in runtime by allowing a loaded NIF library to takeover an already existing resource type and thereby "inherit" all existing objects of that type. The destructor of the new library will thereafter be called for the inherited objects and the library with the old destructor function can be safely unloaded. Existing resource objects, of a module that is upgraded, must either be deleted or taken over by the new NIF library. The unloading of a library will be postponed as long as there exist resource objects with a destructor function in the library.

Threads and concurrency

A NIF is thread-safe without any explicit synchronization as long as it acts as a pure function and only reads the supplied arguments. As soon as you write towards a shared state either through static variables or enif_priv_data you need to supply your own explicit synchronization. This includes terms in process independent environments that are shared between threads. Resource objects will also require synchronization if you treat them as mutable.

The library initialization callbacks load, reload and upgrade are all thread-safe even for shared state data.

Version Management

When a NIF library is built, information about NIF API version is compiled into the library. When a NIF library is loaded the runtime system verifies that the library is of a compatible version. erl_nif.h defines ERL_NIF_MAJOR_VERSION, and ERL_NIF_MINOR_VERSION. ERL_NIF_MAJOR_VERSION will be incremented when NIF library incompatible changes are made to the Erlang runtime system. Normally it will suffice to recompile the NIF library when the ERL_NIF_MAJOR_VERSION has changed, but it could, under rare circumstances, mean that NIF libraries have to be slightly modified. If so, this will of course be documented. ERL_NIF_MINOR_VERSION will be incremented when new features are added. The runtime system uses the minor version to determine what features to use.

The runtime system will normally refuse to load a NIF library if the major versions differ, or if the major versions are equal and the minor version used by the NIF library is greater than the one used by the runtime system. Old NIF libraries with lower major versions will however be allowed after a bump of the major version during a transition period of two major releases. Such old NIF libraries might however fail if deprecated features are used.

Time Measurement

Support for time measurement in NIF libraries: ErlNifTime ErlNifTimeUnit enif_monotonic_time() enif_time_offset() enif_convert_time_unit()

Long-running NIFs

Native functions must normally run quickly, as explained earlier in this document. They generally should execute for no more than a millisecond. But not all native functions can execute so quickly; for example, functions that encrypt large blocks of data or perform lengthy file system operations can often run for tens of seconds or more.

If the functionality of a long-running NIF can be split so that its work can be achieved through a series of shorter NIF calls, the application can either make that series of NIF calls from the Erlang level, or it can call a NIF that first performs a chunk of the work, then invokes the enif_schedule_nif function to schedule another NIF call to perform the next chunk. The final call scheduled in this manner can then return the overall result. Breaking up a long-running function in this manner enables the VM to regain control between calls to the NIFs, thereby avoiding degraded responsiveness, scheduler load balancing problems, and other strange behaviours.

A NIF that cannot be split and cannot execute in a millisecond or less is called a "dirty NIF" because it performs work that the Erlang runtime cannot handle cleanly. Note that the dirty NIF functionality described here is experimental and that you have to enable support for dirty schedulers when building OTP in order to try the functionality out. Applications that make use of such functions must indicate to the runtime that the functions are dirty so they can be handled specially. To schedule a dirty NIF for execution, the appropriate flags value can be set for the NIF in its ErlNifFunc entry, or the application can call enif_schedule_nif, passing to it a pointer to the dirty NIF to be executed and indicating with the flags argument whether it expects the operation to be CPU-bound or I/O-bound.

Dirty NIF support is available only when the emulator is configured with dirty schedulers enabled. This feature is currently disabled by default. The Erlang runtime without SMP support currently do not support dirty schedulers even when the dirty scheduler support has been enabled. To check at runtime for the presence of dirty scheduler threads, code can use the enif_system_info() API function.

INITIALIZATION ERL_NIF_INIT(MODULE, ErlNifFunc funcs[], load, reload, upgrade, unload)

This is the magic macro to initialize a NIF library. It should be evaluated in global file scope.

MODULE is the name of the Erlang module as an identifier without string quotations. It will be stringified by the macro.

funcs is a static array of function descriptors for all the implemented NIFs in this library.

load, reload, upgrade and unload are pointers to functions. One of load, reload or upgrade will be called to initialize the library. unload is called to release the library. They are all described individually below.

If compiling a nif for static inclusion via --enable-static-nifs you have to define STATIC_ERLANG_NIF before the ERL_NIF_INIT declaration.

int (*load)(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info)

load is called when the NIF library is loaded and there is no previously loaded library for this module.

*priv_data can be set to point to some private data that the library needs in order to keep a state between NIF calls. enif_priv_data will return this pointer. *priv_data will be initialized to NULL when load is called.

load_info is the second argument to erlang:load_nif/2.

The library will fail to load if load returns anything other than 0. load can be NULL in case no initialization is needed.

int (*upgrade)(ErlNifEnv* env, void** priv_data, void** old_priv_data, ERL_NIF_TERM load_info)

upgrade is called when the NIF library is loaded and there is old code of this module with a loaded NIF library.

Works the same as load. The only difference is that *old_priv_data already contains the value set by the last call to load or reload for the old module code. *priv_data will be initialized to NULL when upgrade is called. It is allowed to write to both *priv_data and *old_priv_data.

The library will fail to load if upgrade returns anything other than 0 or if upgrade is NULL.

void (*unload)(ErlNifEnv* env, void* priv_data)

unload is called when the module code that the NIF library belongs to is purged as old. New code of the same module may or may not exist. Note that unload is not called for a replaced library as a consequence of reload.

int (*reload)(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info)

The reload mechanism is deprecated. It was only intended as a development feature. Do not use it as an upgrade method for live production systems. It might be removed in future releases. Be sure to pass reload as NULL to ERL_NIF_INIT to disable it when not used.

reload is called when the NIF library is loaded and there is already a previously loaded library for this module code.

Works the same as load. The only difference is that *priv_data already contains the value set by the previous call to load or reload.

The library will fail to load if reload returns anything other than 0 or if reload is NULL.

DATA TYPES ERL_NIF_TERM

Variables of type ERL_NIF_TERM can refer to any Erlang term. This is an opaque type and values of it can only by used either as arguments to API functions or as return values from NIFs. All ERL_NIF_TERM's belong to an environment (ErlNifEnv). A term can not be destructed individually, it is valid until its environment is destructed.

ErlNifEnv

ErlNifEnv represents an environment that can host Erlang terms. All terms in an environment are valid as long as the environment is valid. ErlNifEnv is an opaque type and pointers to it can only be passed on to API functions. There are two types of environments; process bound and process independent.

A process bound environment is passed as the first argument to all NIFs. All function arguments passed to a NIF will belong to that environment. The return value from a NIF must also be a term belonging to the same environment. In addition a process bound environment contains transient information about the calling Erlang process. The environment is only valid in the thread where it was supplied as argument until the NIF returns. It is thus useless and dangerous to store pointers to process bound environments between NIF calls.

A process independent environment is created by calling enif_alloc_env. It can be used to store terms between NIF calls and to send terms with enif_send. A process independent environment with all its terms is valid until you explicitly invalidates it with enif_free_env or enif_send.

All contained terms of a list/tuple/map must belong to the same environment as the list/tuple/map itself. Terms can be copied between environments with enif_make_copy.

ErlNifFunc

typedef struct { const char* name; unsigned arity; ERL_NIF_TERM (*fptr)(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); unsigned flags; } ErlNifFunc;

Describes a NIF by its name, arity and implementation. fptr is a pointer to the function that implements the NIF. The argument argv of a NIF will contain the function arguments passed to the NIF and argc is the length of the array, i.e. the function arity. argv[N-1] will thus denote the Nth argument to the NIF. Note that the argc argument allows for the same C function to implement several Erlang functions with different arity (but same name probably). For a regular NIF, flags is 0 (and so its value can be omitted for statically initialized ErlNifFunc instances), or it can be used to indicate that the NIF is a dirty NIF that should be executed on a dirty scheduler thread (note that the dirty NIF functionality described here is experimental and that you have to enable support for dirty schedulers when building OTP in order to try the functionality out). If the dirty NIF is expected to be CPU-bound, its flags field should be set to ERL_NIF_DIRTY_JOB_CPU_BOUND, or for I/O-bound jobs, ERL_NIF_DIRTY_JOB_IO_BOUND.

ErlNifBinary

typedef struct { unsigned size; unsigned char* data; } ErlNifBinary;

ErlNifBinary contains transient information about an inspected binary term. data is a pointer to a buffer of size bytes with the raw content of the binary.

Note that ErlNifBinary is a semi-opaque type and you are only allowed to read fields size and data.

ErlNifBinaryToTerm

An enumeration of the options that can be given to enif_binary_to_term. For default behavior, use the value 0.

ERL_NIF_BIN2TERM_SAFE

Use this option when receiving data from untrusted sources.

ErlNifPid

ErlNifPid is a process identifier (pid). In contrast to pid terms (instances of ERL_NIF_TERM), ErlNifPid's are self contained and not bound to any environment. ErlNifPid is an opaque type.

ErlNifPort

ErlNifPort is a port identifier. In contrast to port id terms (instances of ERL_NIF_TERM), ErlNifPort's are self contained and not bound to any environment. ErlNifPort is an opaque type.

ErlNifResourceType

Each instance of ErlNifResourceType represent a class of memory managed resource objects that can be garbage collected. Each resource type has a unique name and a destructor function that is called when objects of its type are released.

ErlNifResourceDtor

typedef void ErlNifResourceDtor(ErlNifEnv* env, void* obj);

The function prototype of a resource destructor function.

ErlNifCharEncoding

typedef enum { ERL_NIF_LATIN1 }ErlNifCharEncoding;

The character encoding used in strings and atoms. The only supported encoding is currently ERL_NIF_LATIN1 for iso-latin-1 (8-bit ascii).

ErlNifSysInfo

Used by enif_system_info to return information about the runtime system. Contains currently the exact same content as ErlDrvSysInfo.

ErlNifSInt64

A native signed 64-bit integer type.

ErlNifUInt64

A native unsigned 64-bit integer type.

ErlNifTime

A signed 64-bit integer type for representation of time.

ErlNifTimeUnit

An enumeration of time units supported by the NIF API:

ERL_NIF_SEC

Seconds

ERL_NIF_MSEC

Milliseconds

ERL_NIF_USEC

Microseconds

ERL_NIF_NSEC

Nanoseconds

ErlNifUniqueInteger

An enumeration of the properties that can be requested from enif_unique_integer. For default properties, use the value 0.

ERL_NIF_UNIQUE_POSITIVE

Return only positive integers

ERL_NIF_UNIQUE_MONOTONIC

Return only strictly monotonically increasing integer corresponding to creation time

void *enif_alloc(size_t size) Allocate dynamic memory

Allocate memory of size bytes. Return NULL if allocation failed.

intenif_alloc_binary(size_t size, ErlNifBinary* bin) Create a new binary

Allocate a new binary of size size bytes. Initialize the structure pointed to by bin to refer to the allocated binary. The binary must either be released by enif_release_binary or ownership transferred to an Erlang term with enif_make_binary. An allocated (and owned) ErlNifBinary can be kept between NIF calls.

Return true on success or false if allocation failed.

ErlNifEnv *enif_alloc_env() Create a new environment

Allocate a new process independent environment. The environment can be used to hold terms that is not bound to any process. Such terms can later be copied to a process environment with enif_make_copy or be sent to a process as a message with enif_send.

Return pointer to the new environment.

void *enif_alloc_resource(ErlNifResourceType* type, unsigned size) Allocate a memory managed resource object

Allocate a memory managed resource object of type type and size size bytes.

voidenif_clear_env(ErlNifEnv* env) Clear an environment for reuse

Free all terms in an environment and clear it for reuse. The environment must have been allocated with enif_alloc_env.

size_tenif_binary_to_term(ErlNifEnv *env, const unsigned char* data, size_t size, ERL_NIF_TERM *term, ErlNifBinaryToTerm opts) Create a term from the external format

Create a term that is the result of decoding the binary data at data, which must be encoded according to the Erlang external term format. No more than size bytes are read from data. Argument opts correspond to the second argument to erlang:binary_to_term/2, and must be either 0 or ERL_NIF_BIN2TERM_SAFE.

On success, store the resulting term at *term and return the actual number of bytes read. Return zero if decoding fails or if opts is invalid.

See also: ErlNifBinaryToTerm, erlang:binary_to_term/2 and enif_term_to_binary.

intenif_compare(ERL_NIF_TERM lhs, ERL_NIF_TERM rhs) Compare two terms

Return an integer less than, equal to, or greater than zero if lhs is found, respectively, to be less than, equal, or greater than rhs. Corresponds to the Erlang operators ==, /=, =<, <, >= and > (but not =:= or =/=).

voidenif_cond_broadcast(ErlNifCond *cnd)

Same as erl_drv_cond_broadcast.

ErlNifCond *enif_cond_create(char *name)

Same as erl_drv_cond_create.

voidenif_cond_destroy(ErlNifCond *cnd)

Same as erl_drv_cond_destroy.

voidenif_cond_signal(ErlNifCond *cnd)

Same as erl_drv_cond_signal.

voidenif_cond_wait(ErlNifCond *cnd, ErlNifMutex *mtx)

Same as erl_drv_cond_wait.

intenif_consume_timeslice(ErlNifEnv *env, int percent)

Give the runtime system a hint about how much CPU time the current NIF call has consumed since last hint, or since the start of the NIF if no previous hint has been given. The time is given as a percent of the timeslice that a process is allowed to execute Erlang code until it may be suspended to give time for other runnable processes. The scheduling timeslice is not an exact entity, but can usually be approximated to about 1 millisecond.

Note that it is up to the runtime system to determine if and how to use this information. Implementations on some platforms may use other means in order to determine consumed CPU time. Lengthy NIFs should regardless of this frequently call enif_consume_timeslice in order to determine if it is allowed to continue execution or not.

Returns 1 if the timeslice is exhausted, or 0 otherwise. If 1 is returned the NIF should return as soon as possible in order for the process to yield.

Argument percent must be an integer between 1 and 100. This function must only be called from a NIF-calling thread and argument env must be the environment of the calling process.

This function is provided to better support co-operative scheduling, improve system responsiveness, and make it easier to prevent misbehaviors of the VM due to a NIF monopolizing a scheduler thread. It can be used to divide length work into a number of repeated NIF-calls without the need to create threads. See also the warning text at the beginning of this document.

ErlNifTimeenif_convert_time_unit(ErlNifTime val, ErlNifTimeUnit from, ErlNifTimeUnit to) Convert time unit of a time value

Arguments:

val Value to convert time unit for. from Time unit of val. to Time unit of returned value.

Converts the val value of time unit from to the corresponding value of time unit to. The result is rounded using the floor function.

Returns ERL_NIF_TIME_ERROR if called with an invalid time unit argument.

See also: ErlNifTime and ErlNifTimeUnit.

ERL_NIF_TERMenif_cpu_time(ErlNifEnv *)

Returns the CPU time in the same format as erlang:timestamp(). The CPU time is the time the current logical cpu has spent executing since some arbitrary point in the past. If the OS does not support fetching of this value enif_cpu_time invokes enif_make_badarg.

intenif_equal_tids(ErlNifTid tid1, ErlNifTid tid2)

Same as erl_drv_equal_tids.

voidenif_free(void* ptr) Free dynamic memory

Free memory allocated by enif_alloc.

voidenif_free_env(ErlNifEnv* env) Free an environment allocated with enif_alloc_env

Free an environment allocated with enif_alloc_env. All terms created in the environment will be freed as well.

intenif_get_atom(ErlNifEnv* env, ERL_NIF_TERM term, char* buf, unsigned size, ErlNifCharEncoding encode) Get the text representation of an atom term

Write a null-terminated string, in the buffer pointed to by buf of size size, consisting of the string representation of the atom term with encoding encode. Return the number of bytes written (including terminating null character) or 0 if term is not an atom with maximum length of size-1.

intenif_get_atom_length(ErlNifEnv* env, ERL_NIF_TERM term, unsigned* len, ErlNifCharEncoding encode) Get the length of atom term

Set *len to the length (number of bytes excluding terminating null character) of the atom term with encoding encode. Return true on success or false if term is not an atom.

intenif_get_double(ErlNifEnv* env, ERL_NIF_TERM term, double* dp) Read a floating-point number term

Set *dp to the floating point value of term. Return true on success or false if term is not a float.

intenif_get_int(ErlNifEnv* env, ERL_NIF_TERM term, int* ip) Read an integer term

Set *ip to the integer value of term. Return true on success or false if term is not an integer or is outside the bounds of type int.

intenif_get_int64(ErlNifEnv* env, ERL_NIF_TERM term, ErlNifSInt64* ip) Read a 64-bit integer term

Set *ip to the integer value of term. Return true on success or false if term is not an integer or is outside the bounds of a signed 64-bit integer.

intenif_get_local_pid(ErlNifEnv* env, ERL_NIF_TERM term, ErlNifPid* pid) Read an local pid term

If term is the pid of a node local process, initialize the pid variable *pid from it and return true. Otherwise return false. No check if the process is alive is done.

intenif_get_local_port(ErlNifEnv* env, ERL_NIF_TERM term, ErlNifPort* port_id) Read an local port term

If term identifies a node local port, initialize the port variable *port_id from it and return true. Otherwise return false. No check if the port is alive is done.

intenif_get_list_cell(ErlNifEnv* env, ERL_NIF_TERM list, ERL_NIF_TERM* head, ERL_NIF_TERM* tail) Get head and tail from a list

Set *head and *tail from list and return true, or return false if list is not a non-empty list.

intenif_get_list_length(ErlNifEnv* env, ERL_NIF_TERM term, unsigned* len) Get the length of list term

Set *len to the length of list term and return true, or return false if term is not a proper list.

intenif_get_long(ErlNifEnv* env, ERL_NIF_TERM term, long int* ip) Read an long integer term

Set *ip to the long integer value of term and return true, or return false if term is not an integer or is outside the bounds of type long int.

intenif_get_map_size(ErlNifEnv* env, ERL_NIF_TERM term, size_t *size) Read the size of a map term

Set *size to the number of key-value pairs in the map term and return true, or return false if term is not a map.

intenif_get_map_value(ErlNifEnv* env, ERL_NIF_TERM map, ERL_NIF_TERM key, ERL_NIF_TERM* value) Get the value of a key in a map

Set *value to the value associated with key in the map map and return true. Return false if map is not a map or if map does not contain key.

intenif_get_resource(ErlNifEnv* env, ERL_NIF_TERM term, ErlNifResourceType* type, void** objp) Get the pointer to a resource object

Set *objp to point to the resource object referred to by term.

Return true on success or false if term is not a handle to a resource object of type type.

intenif_get_string(ErlNifEnv* env, ERL_NIF_TERM list, char* buf, unsigned size, ErlNifCharEncoding encode) Get a C-string from a list

Write a null-terminated string, in the buffer pointed to by buf with size size, consisting of the characters in the string list. The characters are written using encoding encode. Return the number of bytes written (including terminating null character), or -size if the string was truncated due to buffer space, or 0 if list is not a string that can be encoded with encode or if size was less than 1. The written string is always null-terminated unless buffer size is less than 1.

intenif_get_tuple(ErlNifEnv* env, ERL_NIF_TERM term, int* arity, const ERL_NIF_TERM** array) Inspect the elements of a tuple

If term is a tuple, set *array to point to an array containing the elements of the tuple and set *arity to the number of elements. Note that the array is read-only and (*array)[N-1] will be the Nth element of the tuple. *array is undefined if the arity of the tuple is zero.

Return true on success or false if term is not a tuple.

intenif_get_uint(ErlNifEnv* env, ERL_NIF_TERM term, unsigned int* ip) Read an unsigned integer term

Set *ip to the unsigned integer value of term and return true, or return false if term is not an unsigned integer or is outside the bounds of type unsigned int.

intenif_get_uint64(ErlNifEnv* env, ERL_NIF_TERM term, ErlNifUInt64* ip) Read an unsigned 64-bit integer term

Set *ip to the unsigned integer value of term and return true, or return false if term is not an unsigned integer or is outside the bounds of an unsigned 64-bit integer.

intenif_get_ulong(ErlNifEnv* env, ERL_NIF_TERM term, unsigned long* ip) Read an unsigned integer term

Set *ip to the unsigned long integer value of term and return true, or return false if term is not an unsigned integer or is outside the bounds of type unsigned long.

intenif_getenv(const char* key, char* value, size_t *value_size) Get the value of an environment variable

Same as erl_drv_getenv.

intenif_has_pending_exception(ErlNifEnv* env, ERL_NIF_TERM* reason) Check if an exception has been raised

Return true if a pending exception is associated with the environment env. If reason is a null pointer, ignore it. Otherwise, if there's a pending exception associated with env, set the ERL_NIF_TERM to which reason points to the value of the exception's term. For example, if enif_make_badarg is called to set a pending badarg exception, a subsequent call to enif_has_pending_exception(env, &reason) will set reason to the atom badarg, then return true.

See also: enif_make_badarg and enif_raise_exception.

intenif_inspect_binary(ErlNifEnv* env, ERL_NIF_TERM bin_term, ErlNifBinary* bin) Inspect the content of a binary

Initialize the structure pointed to by bin with information about the binary term bin_term. Return true on success or false if bin_term is not a binary.

intenif_inspect_iolist_as_binary(ErlNifEnv* env, ERL_NIF_TERM term, ErlNifBinary* bin) Inspect the content of an iolist

Initialize the structure pointed to by bin with one continuous buffer with the same byte content as iolist. As with inspect_binary, the data pointed to by bin is transient and does not need to be released. Return true on success or false if iolist is not an iolist.

intenif_is_atom(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is an atom

Return true if term is an atom.

intenif_is_binary(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is a binary

Return true if term is a binary

intenif_is_empty_list(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is an empty list

Return true if term is an empty list.

intenif_is_exception(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is an exception

Return true if term is an exception.

intenif_is_map(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is a map

Return true if term is a map, false otherwise.

intenif_is_number(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is a number (integer or float)

Return true if term is a number.

intenif_is_fun(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is a fun

Return true if term is a fun.

intenif_is_identical(ERL_NIF_TERM lhs, ERL_NIF_TERM rhs) Erlang operator =:=

Return true if the two terms are identical. Corresponds to the Erlang operators =:= and =/=.

intenif_is_on_dirty_scheduler(ErlNifEnv* env) Check to see if executing on a dirty scheduler thread

Check to see if the current NIF is executing on a dirty scheduler thread. If the emulator is built with threading support, calling enif_is_on_dirty_scheduler from within a dirty NIF returns true. It returns false when the calling NIF is a regular NIF running on a normal scheduler thread, or when the emulator is built without threading support.

intenif_is_pid(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is a pid

Return true if term is a pid.

intenif_is_port(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is a port

Return true if term is a port.

intenif_is_port_alive(ErlNifEnv* env, ErlNifPort *port_id) Determine if a local port is alive or not.

Return true if port_id is currently alive.

This function can only be used in a from a NIF-calling thread.

intenif_is_process_alive(ErlNifEnv* env, ErlNifPid *pid) Determine if a local process is alive or not.

Return true if pid is currently alive.

This function is only thread-safe when the emulator with SMP support is used. It can only be used in a non-SMP emulator from a NIF-calling thread.

intenif_is_ref(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is a reference

Return true if term is a reference.

intenif_is_tuple(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is a tuple

Return true if term is a tuple.

intenif_is_list(ErlNifEnv* env, ERL_NIF_TERM term) Determine if a term is a list

Return true if term is a list.

intenif_keep_resource(void* obj) Add a reference to a resource object

Add a reference to resource object obj obtained from enif_alloc_resource. Each call to enif_keep_resource for an object must be balanced by a call to enif_release_resource before the object will be destructed.

ERL_NIF_TERMenif_make_atom(ErlNifEnv* env, const char* name) Create an atom term

Create an atom term from the null-terminated C-string name with iso-latin-1 encoding. If the length of name exceeds the maximum length allowed for an atom (255 characters), enif_make_atom invokes enif_make_badarg.

ERL_NIF_TERMenif_make_atom_len(ErlNifEnv* env, const char* name, size_t len) Create an atom term

Create an atom term from the string name with length len. Null-characters are treated as any other characters. If len is greater than the maximum length allowed for an atom (255 characters), enif_make_atom invokes enif_make_badarg.

ERL_NIF_TERMenif_make_badarg(ErlNifEnv* env) Make a badarg exception

Make a badarg exception to be returned from a NIF, and associate it with the environment env. Once a NIF or any function it calls invokes enif_make_badarg, the runtime ensures that a badarg exception is raised when the NIF returns, even if the NIF attempts to return a non-exception term instead. The return value from enif_make_badarg may be used only as the return value from the NIF that invoked it (directly or indirectly) or be passed to enif_is_exception, but not to any other NIF API function.

See also: enif_has_pending_exception and enif_raise_exception.

In earlier versions (older than erts-7.0, OTP 18) the return value from enif_make_badarg had to be returned from the NIF. This requirement is now lifted as the return value from the NIF is ignored if enif_make_badarg has been invoked.

ERL_NIF_TERMenif_make_binary(ErlNifEnv* env, ErlNifBinary* bin) Make a binary term

Make a binary term from bin. Any ownership of the binary data will be transferred to the created term and bin should be considered read-only for the rest of the NIF call and then as released.

ERL_NIF_TERMenif_make_copy(ErlNifEnv* dst_env, ERL_NIF_TERM src_term) Make a copy of a term

Make a copy of term src_term. The copy will be created in environment dst_env. The source term may be located in any environment.

ERL_NIF_TERMenif_make_double(ErlNifEnv* env, double d) Create a floating-point term

Create a floating-point term from a double. If the double argument is not finite or is NaN, enif_make_double invokes enif_make_badarg.

intenif_make_existing_atom(ErlNifEnv* env, const char* name, ERL_NIF_TERM* atom, ErlNifCharEncoding encode) Create an existing atom term

Try to create the term of an already existing atom from the null-terminated C-string name with encoding encode. If the atom already exists store the term in *atom and return true, otherwise return false. If the length of name exceeds the maximum length allowed for an atom (255 characters), enif_make_existing_atom returns false.

intenif_make_existing_atom_len(ErlNifEnv* env, const char* name, size_t len, ERL_NIF_TERM* atom, ErlNifCharEncoding encoding) Create an existing atom term

Try to create the term of an already existing atom from the string name with length len and encoding encode. Null-characters are treated as any other characters. If the atom already exists store the term in *atom and return true, otherwise return false. If len is greater than the maximum length allowed for an atom (255 characters), enif_make_existing_atom_len returns false.

ERL_NIF_TERMenif_make_int(ErlNifEnv* env, int i) Create an integer term

Create an integer term.

ERL_NIF_TERMenif_make_int64(ErlNifEnv* env, ErlNifSInt64 i) Create an integer term

Create an integer term from a signed 64-bit integer.

ERL_NIF_TERMenif_make_list(ErlNifEnv* env, unsigned cnt, ...) Create a list term

Create an ordinary list term of length cnt. Expects cnt number of arguments (after cnt) of type ERL_NIF_TERM as the elements of the list. An empty list is returned if cnt is 0.

ERL_NIF_TERMenif_make_list1(ErlNifEnv* env, ERL_NIF_TERM e1) ERL_NIF_TERMenif_make_list2(ErlNifEnv* env, ERL_NIF_TERM e1, ERL_NIF_TERM e2) ERL_NIF_TERMenif_make_list3(ErlNifEnv* env, ERL_NIF_TERM e1, ERL_NIF_TERM e2, ERL_NIF_TERM e3) ERL_NIF_TERMenif_make_list4(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e4) ERL_NIF_TERMenif_make_list5(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e5) ERL_NIF_TERMenif_make_list6(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e6) ERL_NIF_TERMenif_make_list7(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e7) ERL_NIF_TERMenif_make_list8(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e8) ERL_NIF_TERMenif_make_list9(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e9) Create a list term

Create an ordinary list term with length indicated by the function name. Prefer these functions (macros) over the variadic enif_make_list to get a compile time error if the number of arguments does not match.

ERL_NIF_TERMenif_make_list_cell(ErlNifEnv* env, ERL_NIF_TERM head, ERL_NIF_TERM tail) Create a list cell

Create a list cell [head | tail].

ERL_NIF_TERMenif_make_list_from_array(ErlNifEnv* env, const ERL_NIF_TERM arr[], unsigned cnt) Create a list term from an array

Create an ordinary list containing the elements of array arr of length cnt. An empty list is returned if cnt is 0.

ERL_NIF_TERMenif_make_long(ErlNifEnv* env, long int i) Create an integer term from a long int

Create an integer term from a long int.

unsigned char *enif_make_new_binary(ErlNifEnv* env, size_t size, ERL_NIF_TERM* termp) Allocate and create a new binary term

Allocate a binary of size size bytes and create an owning term. The binary data is mutable until the calling NIF returns. This is a quick way to create a new binary without having to use ErlNifBinary. The drawbacks are that the binary can not be kept between NIF calls and it can not be reallocated.

Return a pointer to the raw binary data and set *termp to the binary term.

ERL_NIF_TERMenif_make_new_map(ErlNifEnv* env) Make an empty map term

Make an empty map term.

intenif_make_map_put(ErlNifEnv* env, ERL_NIF_TERM map_in, ERL_NIF_TERM key, ERL_NIF_TERM value, ERL_NIF_TERM* map_out) Insert key-value pair in map

Make a copy of map map_in and insert key with value. If key already exists in map_in, the old associated value is replaced by value. If successful set *map_out to the new map and return true. Return false if map_in is not a map.

The map_in term must belong to the environment env.

intenif_make_map_update(ErlNifEnv* env, ERL_NIF_TERM map_in, ERL_NIF_TERM key, ERL_NIF_TERM new_value, ERL_NIF_TERM* map_out) Replace value for key in map

Make a copy of map map_in and replace the old associated value for key with new_value. If successful set *map_out to the new map and return true. Return false if map_in is not a map or if it does no contain key.

The map_in term must belong to the environment env.

intenif_make_map_remove(ErlNifEnv* env, ERL_NIF_TERM map_in, ERL_NIF_TERM key, ERL_NIF_TERM* map_out) Remove key from map

If map map_in contains key, make a copy of map_in in *map_out and remove key and associated value. If map map_in does not contain key, set *map_out to map_in. Return true for success or false if map_in is not a map.

The map_in term must belong to the environment env.

ERL_NIF_TERMenif_make_pid(ErlNifEnv* env, const ErlNifPid* pid) Make a pid term

Make a pid term from *pid.

ERL_NIF_TERMenif_make_ref(ErlNifEnv* env) Create a reference

Create a reference like erlang:make_ref/0.

ERL_NIF_TERMenif_make_resource(ErlNifEnv* env, void* obj) Create an opaque handle to a resource object

Create an opaque handle to a memory managed resource object obtained by enif_alloc_resource. No ownership transfer is done, as the resource object still needs to be released by enif_release_resource, but note that the call to enif_release_resource can occur immediately after obtaining the term from enif_make_resource, in which case the resource object will be deallocated when the term is garbage collected. See the example of creating and returning a resource object for more details.

Note that the only defined behaviour of using a resource term in an Erlang program is to store it and send it between processes on the same node. Other operations such as matching or term_to_binary will have unpredictable (but harmless) results.

ERL_NIF_TERMenif_make_resource_binary(ErlNifEnv* env, void* obj, const void* data, size_t size) Create a custom binary term

Create a binary term that is memory managed by a resource object obj obtained by enif_alloc_resource. The returned binary term will consist of size bytes pointed to by data. This raw binary data must be kept readable and unchanged until the destructor of the resource is called. The binary data may be stored external to the resource object in which case it is the responsibility of the destructor to release the data.

Several binary terms may be managed by the same resource object. The destructor will not be called until the last binary is garbage collected. This can be useful as a way to return different parts of a larger binary buffer.

As with enif_make_resource, no ownership transfer is done. The resource still needs to be released with enif_release_resource.

intenif_make_reverse_list(ErlNifEnv* env, ERL_NIF_TERM list_in, ERL_NIF_TERM *list_out) Create the reverse of a list

Set *list_out to the reverse list of the list list_in and return true, or return false if list_in is not a list. This function should only be used on short lists as a copy will be created of the list which will not be released until after the nif returns.

The list_in term must belong to the environment env.

ERL_NIF_TERMenif_make_string(ErlNifEnv* env, const char* string, ErlNifCharEncoding encoding) Create a string

Create a list containing the characters of the null-terminated string string with encoding encoding.

ERL_NIF_TERMenif_make_string_len(ErlNifEnv* env, const char* string, size_t len, ErlNifCharEncoding encoding) Create a string

Create a list containing the characters of the string string with length len and encoding encoding. Null-characters are treated as any other characters.

ERL_NIF_TERMenif_make_sub_binary(ErlNifEnv* env, ERL_NIF_TERM bin_term, size_t pos, size_t size) Make a subbinary term

Make a subbinary of binary bin_term, starting at zero-based position pos with a length of size bytes. bin_term must be a binary or bitstring and pos+size must be less or equal to the number of whole bytes in bin_term.

ERL_NIF_TERMenif_make_tuple(ErlNifEnv* env, unsigned cnt, ...) Create a tuple term

Create a tuple term of arity cnt. Expects cnt number of arguments (after cnt) of type ERL_NIF_TERM as the elements of the tuple.

ERL_NIF_TERMenif_make_tuple1(ErlNifEnv* env, ERL_NIF_TERM e1) ERL_NIF_TERMenif_make_tuple2(ErlNifEnv* env, ERL_NIF_TERM e1, ERL_NIF_TERM e2) ERL_NIF_TERMenif_make_tuple3(ErlNifEnv* env, ERL_NIF_TERM e1, ERL_NIF_TERM e2, ERL_NIF_TERM e3) ERL_NIF_TERMenif_make_tuple4(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e4) ERL_NIF_TERMenif_make_tuple5(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e5) ERL_NIF_TERMenif_make_tuple6(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e6) ERL_NIF_TERMenif_make_tuple7(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e7) ERL_NIF_TERMenif_make_tuple8(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e8) ERL_NIF_TERMenif_make_tuple9(ErlNifEnv* env, ERL_NIF_TERM e1, ..., ERL_NIF_TERM e9) Create a tuple term

Create a tuple term with length indicated by the function name. Prefer these functions (macros) over the variadic enif_make_tuple to get a compile time error if the number of arguments does not match.

ERL_NIF_TERMenif_make_tuple_from_array(ErlNifEnv* env, const ERL_NIF_TERM arr[], unsigned cnt) Create a tuple term from an array

Create a tuple containing the elements of array arr of length cnt.

ERL_NIF_TERMenif_make_uint(ErlNifEnv* env, unsigned int i) Create an unsigned integer term

Create an integer term from an unsigned int.

ERL_NIF_TERMenif_make_uint64(ErlNifEnv* env, ErlNifUInt64 i) Create an unsigned integer term

Create an integer term from an unsigned 64-bit integer.

ERL_NIF_TERMenif_make_unique_integer(ErlNifEnv *env, ErlNifUniqueInteger properties)

Returns a unique integer with the same properties as given by erlang:unique_integer/1.

env is the environment to create the integer in.

ERL_NIF_UNIQUE_POSITIVE and ERL_NIF_UNIQUE_MONOTONIC can be passed as the second argument to change the properties of the integer returned. It is possible to combine them by or:ing the two values together.

See also: ErlNifUniqueInteger.

ERL_NIF_TERMenif_make_ulong(ErlNifEnv* env, unsigned long i) Create an integer term from an unsigned long int

Create an integer term from an unsigned long int.

intenif_map_iterator_create(ErlNifEnv *env, ERL_NIF_TERM map, ErlNifMapIterator *iter, ErlNifMapIteratorEntry entry) Create a map iterator

Create an iterator for the map map by initializing the structure pointed to by iter. The entry argument determines the start position of the iterator: ERL_NIF_MAP_ITERATOR_FIRST or ERL_NIF_MAP_ITERATOR_LAST. Return true on success or false if map is not a map.

A map iterator is only useful during the lifetime of the environment env that the map belongs to. The iterator must be destroyed by calling enif_map_iterator_destroy.

ERL_NIF_TERM key, value; ErlNifMapIterator iter; enif_map_iterator_create(env, my_map, &iter, ERL_NIF_MAP_ITERATOR_FIRST); while (enif_map_iterator_get_pair(env, &iter, &key, &value)) { do_something(key,value); enif_map_iterator_next(env, &iter); } enif_map_iterator_destroy(env, &iter);

The key-value pairs of a map have no defined iteration order. The only guarantee is that the iteration order of a single map instance is preserved during the lifetime of the environment that the map belongs to.

voidenif_map_iterator_destroy(ErlNifEnv *env, ErlNifMapIterator *iter) Destroy a map iterator

Destroy a map iterator created by enif_map_iterator_create.

intenif_map_iterator_get_pair(ErlNifEnv *env, ErlNifMapIterator *iter, ERL_NIF_TERM *key, ERL_NIF_TERM *value) Get key and value at current map iterator position

Get key and value terms at current map iterator position. On success set *key and *value and return true. Return false if the iterator is positioned at head (before first entry) or tail (beyond last entry).

intenif_map_iterator_is_head(ErlNifEnv *env, ErlNifMapIterator *iter) Check if map iterator is positioned before first

Return true if map iterator iter is positioned before first entry.

intenif_map_iterator_is_tail(ErlNifEnv *env, ErlNifMapIterator *iter) Check if map iterator is positioned after last

Return true if map iterator iter is positioned after last entry.

intenif_map_iterator_next(ErlNifEnv *env, ErlNifMapIterator *iter) Increment map iterator to point to next entry

Increment map iterator to point to next key-value entry. Return true if the iterator is now positioned at a valid key-value entry, or false if the iterator is positioned at the tail (beyond the last entry).

intenif_map_iterator_prev(ErlNifEnv *env, ErlNifMapIterator *iter) Decrement map iterator to point to previous entry

Decrement map iterator to point to previous key-value entry. Return true if the iterator is now positioned at a valid key-value entry, or false if the iterator is positioned at the head (before the first entry).

ErlNifTimeenif_monotonic_time(ErlNifTimeUnit time_unit) Get Erlang Monotonic Time

Arguments:

time_unit Time unit of returned value.

Returns the current Erlang monotonic time. Note that it is not uncommon with negative values.

Returns ERL_NIF_TIME_ERROR if called with an invalid time unit argument, or if called from a thread that is not a scheduler thread.

See also: ErlNifTime and ErlNifTimeUnit.

ErlNifMutex *enif_mutex_create(char *name)

Same as erl_drv_mutex_create.

voidenif_mutex_destroy(ErlNifMutex *mtx)

Same as erl_drv_mutex_destroy.

voidenif_mutex_lock(ErlNifMutex *mtx)

Same as erl_drv_mutex_lock.

intenif_mutex_trylock(ErlNifMutex *mtx)

Same as erl_drv_mutex_trylock.

voidenif_mutex_unlock(ErlNifMutex *mtx)

Same as erl_drv_mutex_unlock.

ERL_NIF_TERMenif_now_time(ErlNifEnv *env)

Retuns an erlang:now() timestamp. The enif_now_time function is deprecated.

ErlNifResourceType *enif_open_resource_type(ErlNifEnv* env, const char* module_str, const char* name, ErlNifResourceDtor* dtor, ErlNifResourceFlags flags, ErlNifResourceFlags* tried) Create or takeover a resource type

Create or takeover a resource type identified by the string name and give it the destructor function pointed to by dtor. Argument flags can have the following values:

ERL_NIF_RT_CREATE Create a new resource type that does not already exist. ERL_NIF_RT_TAKEOVER Open an existing resource type and take over ownership of all its instances. The supplied destructor dtor will be called both for existing instances as well as new instances not yet created by the calling NIF library.

The two flag values can be combined with bitwise-or. The name of the resource type is local to the calling module. Argument module_str is not (yet) used and must be NULL. The dtor may be NULL in case no destructor is needed.

On success, return a pointer to the resource type and *tried will be set to either ERL_NIF_RT_CREATE or ERL_NIF_RT_TAKEOVER to indicate what was actually done. On failure, return NULL and set *tried to flags. It is allowed to set tried to NULL.

Note that enif_open_resource_type is only allowed to be called in the three callbacks load, reload and upgrade.

intenif_port_command(ErlNifEnv* env, const ErlNifPort* to_port, ErlNifEnv *msg_env, ERL_NIF_TERM msg) Send a port_command to to_port

This function works the same as erlang:port_command/2 except that it is always completely asynchronous. This call may return false if it detects that the port is already dead, otherwise it will return true.

env The environment of the calling process. May not be NULL. *to_port The port id of the receiving port. The port id should refer to a port on the local node. msg_env The environment of the message term. Can be a process independent environment allocated with enif_alloc_env or NULL. msg The message term to send. The same limitations apply as on the payload to erlang:port_command/2.

Using a msg_env of NULL is an optimization which groups together calls to enif_alloc_env, enif_make_copy, enif_port_command and enif_free_env into one call. This optimization is only usefull when a majority of the terms are to be copied from env to the msg_env.

The call may return false if it detects that the command failed for some reason. Otherwise true is returned.

See also: enif_get_local_port.

void *enif_priv_data(ErlNifEnv* env) Get the private data of a NIF library

Return the pointer to the private data that was set by load, reload or upgrade.

Was previously named enif_get_data.

ERL_NIF_TERMenif_raise_exception(ErlNifEnv* env, ERL_NIF_TERM reason) Raise a NIF error exception

Create an error exception with the term reason to be returned from a NIF, and associate it with the environment env. Once a NIF or any function it calls invokes enif_raise_exception, the runtime ensures that the exception it creates is raised when the NIF returns, even if the NIF attempts to return a non-exception term instead. The return value from enif_raise_exception may be used only as the return value from the NIF that invoked it (directly or indirectly) or be passed to enif_is_exception, but not to any other NIF API function.

See also: enif_has_pending_exception and enif_make_badarg.

intenif_realloc_binary(ErlNifBinary* bin, size_t size) Change the size of a binary

Change the size of a binary bin. The source binary may be read-only, in which case it will be left untouched and a mutable copy is allocated and assigned to *bin. Return true on success, false if memory allocation failed.

voidenif_release_binary(ErlNifBinary* bin) Release a binary

Release a binary obtained from enif_alloc_binary.

voidenif_release_resource(void* obj) Release a resource object

Remove a reference to resource object objobtained from enif_alloc_resource. The resource object will be destructed when the last reference is removed. Each call to enif_release_resource must correspond to a previous call to enif_alloc_resource or enif_keep_resource. References made by enif_make_resource can only be removed by the garbage collector.

ErlNifRWLock *enif_rwlock_create(char *name)

Same as erl_drv_rwlock_create.

voidenif_rwlock_destroy(ErlNifRWLock *rwlck)

Same as erl_drv_rwlock_destroy.

voidenif_rwlock_rlock(ErlNifRWLock *rwlck)

Same as erl_drv_rwlock_rlock.

voidenif_rwlock_runlock(ErlNifRWLock *rwlck)

Same as erl_drv_rwlock_runlock.

voidenif_rwlock_rwlock(ErlNifRWLock *rwlck)

Same as erl_drv_rwlock_rwlock.

voidenif_rwlock_rwunlock(ErlNifRWLock *rwlck)

Same as erl_drv_rwlock_rwunlock.

intenif_rwlock_tryrlock(ErlNifRWLock *rwlck)

Same as erl_drv_rwlock_tryrlock.

intenif_rwlock_tryrwlock(ErlNifRWLock *rwlck)

Same as erl_drv_rwlock_tryrwlock.

ERL_NIF_TERMenif_schedule_nif(ErlNifEnv* env, const char* fun_name, int flags, ERL_NIF_TERM (*fp)(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]), int argc, const ERL_NIF_TERM argv[]) Schedule a NIF for execution

Schedule NIF fp to execute. This function allows an application to break up long-running work into multiple regular NIF calls or to schedule a dirty NIF to execute on a dirty scheduler thread (note that the dirty NIF functionality described here is experimental and that you have to enable support for dirty schedulers when building OTP in order to try the functionality out).

The fun_name argument provides a name for the NIF being scheduled for execution. If it cannot be converted to an atom, enif_schedule_nif returns a badarg exception.

The flags argument must be set to 0 for a regular NIF, or if the emulator was built the experimental dirty scheduler support enabled, flags can be set to either ERL_NIF_DIRTY_JOB_CPU_BOUND if the job is expected to be primarily CPU-bound, or ERL_NIF_DIRTY_JOB_IO_BOUND for jobs that will be I/O-bound. If dirty scheduler threads are not available in the emulator, a try to schedule such a job will result in a badarg exception.

The argc and argv arguments can either be the originals passed into the calling NIF, or they can be values created by the calling NIF.

The calling NIF must use the return value of enif_schedule_nif as its own return value.

Be aware that enif_schedule_nif, as its name implies, only schedules the NIF for future execution. The calling NIF does not block waiting for the scheduled NIF to execute and return, which means that the calling NIF can't expect to receive the scheduled NIF return value and use it for further operations.

ErlNifPid *enif_self(ErlNifEnv* caller_env, ErlNifPid* pid) Get the pid of the calling process

Initialize the pid variable *pid to represent the calling process. Return pid.

intenif_send(ErlNifEnv* env, ErlNifPid* to_pid, ErlNifEnv* msg_env, ERL_NIF_TERM msg) Send a message to a process

Send a message to a process.

env The environment of the calling process. Must be NULL if and only if calling from a created thread. *to_pid The pid of the receiving process. The pid should refer to a process on the local node. msg_env The environment of the message term. Must be a process independent environment allocated with enif_alloc_env or NULL. msg The message term to send.

Return true on success, or false if *to_pid does not refer to an alive local process.

The message environment msg_env with all its terms (including msg) will be invalidated by a successful call to enif_send. The environment should either be freed with enif_free_env of cleared for reuse with enif_clear_env.

If msg_env is set to NULL the msg term is copied and the original term and its environemt is still valid after the call.

This function is only thread-safe when the emulator with SMP support is used. It can only be used in a non-SMP emulator from a NIF-calling thread.

Passing msg_env as NULL is only supported since erts-8.0 (OTP 19).

unsignedenif_sizeof_resource(void* obj) Get the byte size of a resource object

Get the byte size of a resource object obj obtained by enif_alloc_resource.

voidenif_system_info(ErlNifSysInfo *sys_info_ptr, size_t size) Get information about the Erlang runtime system

Same as driver_system_info.

intenif_term_to_binary(ErlNifEnv *env, ERL_NIF_TERM term, ErlNifBinary *bin) Convert a term to the external format

Allocates a new binary with enif_alloc_binary and stores the result of encoding term according to the Erlang external term format.

Returns true on success or false if allocation failed.

See also: erlang:term_to_binary/1 and enif_binary_to_term.

intenif_thread_create(char *name,ErlNifTid *tid,void * (*func)(void *),void *args,ErlNifThreadOpts *opts)

Same as erl_drv_thread_create.

voidenif_thread_exit(void *resp)

Same as erl_drv_thread_exit.

intenif_thread_join(ErlNifTid, void **respp)

Same as erl_drv_thread_join .

ErlNifThreadOpts *enif_thread_opts_create(char *name)

Same as erl_drv_thread_opts_create.

voidenif_thread_opts_destroy(ErlNifThreadOpts *opts)

Same as erl_drv_thread_opts_destroy.

ErlNifTidenif_thread_self(void)

Same as erl_drv_thread_self.

ErlNifTimeenif_time_offset(ErlNifTimeUnit time_unit) Get current Time Offset

Arguments:

time_unit Time unit of returned value.

Returns the current time offset between Erlang monotonic time and Erlang system time converted into the time_unit passed as argument.

Returns ERL_NIF_TIME_ERROR if called with an invalid time unit argument, or if called from a thread that is not a scheduler thread.

See also: ErlNifTime and ErlNifTimeUnit.

intenif_tsd_key_create(char *name, ErlNifTSDKey *key)

Same as erl_drv_tsd_key_create.

voidenif_tsd_key_destroy(ErlNifTSDKey key)

Same as erl_drv_tsd_key_destroy.

void *enif_tsd_get(ErlNifTSDKey key)

Same as erl_drv_tsd_get.

voidenif_tsd_set(ErlNifTSDKey key, void *data)

Same as erl_drv_tsd_set.

SEE ALSO

erlang:load_nif/2