<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE comref SYSTEM "comref.dtd">

<comref>
  <header>
    <copyright>
      <year>1997</year><year>2016</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at
 
          http://www.apache.org/licenses/LICENSE-2.0

      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.

    </legalnotice>

    <title>erlc</title>
    <prepared>Bj&ouml;rn Gustavsson</prepared>
    <responsible>Bjarne D&auml;cker</responsible>
    <docno>1</docno>
    <approved>Bjarne D&auml;cker</approved>
    <checked></checked>
    <date>97-03-24</date>
    <rev>A</rev>
    <file>erlc.xml</file>
  </header>
  <com>erlc</com>
  <comsummary>Compiler</comsummary>
  <description>
    <p>The <c><![CDATA[erlc]]></c> program provides a common way to run
      all compilers in the Erlang system.
      Depending on the extension of each input file, <c><![CDATA[erlc]]></c>
      will invoke the appropriate compiler.
      Regardless of which compiler is used, the same flags are used to provide parameters such as include paths and output directory.</p>
    <p>The current working directory, <c>"."</c>, will not be included
    in the code path when running the compiler (to avoid loading
    Beam files from the current working directory that could potentially
    be in conflict with the compiler or Erlang/OTP system used by the
    compiler).</p>
  </description>
  <funcs>
    <func>
      <name>erlc flags file1.ext file2.ext...</name>
      <fsummary>Compile files</fsummary>
      <desc>
        <p><c><![CDATA[Erlc]]></c> compiles one or more files.
          The files must include the extension, for example <c><![CDATA[.erl]]></c>
          for Erlang source code, or <c><![CDATA[.yrl]]></c> for Yecc source code.
          <c><![CDATA[Erlc]]></c> uses the extension to invoke the correct compiler.</p>
      </desc>
    </func>
  </funcs>

  <section>
    <title>Generally Useful Flags</title>
    <p>The following flags are supported:
      </p>
    <taglist>
      <tag>-I <em>directory</em></tag>
      <item>
        <p>Instructs the compiler to search for include files in
          the specified directory. When encountering an
          <c><![CDATA[-include]]></c> or <c><![CDATA[-include_lib]]></c> directive, the
          compiler searches for header files in the following
          directories:</p>
        <list type="ordered">
          <item>
            <p><c><![CDATA["."]]></c>, the current working directory of the
              file server;</p>
          </item>
          <item>
            <p>the base name of the compiled file;</p>
          </item>
          <item>
            <p>the directories specified using the <c><![CDATA[-I]]></c> option.
              The directory specified last is searched first.</p>
          </item>
        </list>
      </item>
      <tag>-o <em>directory</em></tag>
      <item>
        <p>The directory where the compiler should place the output files.
          If not specified, output files will be placed in the current working
          directory.</p>
      </item>
      <tag>-D<em>name</em></tag>
      <item>
        <p>Defines a macro.</p>
      </item>
      <tag>-D<em>name</em>=<em>value</em></tag>
      <item>
        <p>Defines a macro with the given value.
          The value can be any Erlang term.
          Depending on the platform, the value may need to be
          quoted if the shell itself interprets certain characters.
          On Unix, terms which contain tuples and list
          must be quoted. Terms which contain spaces
          must be quoted on all platforms.</p>
      </item>
      <tag>-W<em>error</em></tag>
      <item>
        <p>Makes all warnings into errors.</p>
      </item>
      <tag>-W<em>number</em></tag>
      <item>
        <p>Sets warning level to <em>number</em>. Default is <c><![CDATA[1]]></c>.
          Use <c><![CDATA[-W0]]></c> to turn off warnings.</p>
      </item>
      <tag>-W</tag>
      <item>
        <p>Same as <c><![CDATA[-W1]]></c>. Default.</p>
      </item>
      <tag>-v</tag>
      <item>
        <p>Enables verbose output.</p>
      </item>
      <tag>-b <em>output-type</em></tag>
      <item>
        <p>Specifies the type of output file.
          Generally, <em>output-type</em> is the same as the file extension
          of the output file but without the period.
          This option will be ignored by compilers that have a
          a single output format.</p>
      </item>
      <tag>-smp</tag>
      <item>
        <p>Compile using the SMP emulator. This is mainly useful
          for compiling native code, which needs to be compiled with the same
          run-time system that it should be run on.</p>
      </item>
      <tag>-M</tag>
      <item>
        <p>Produces a Makefile rule to track headers dependencies. The
          rule is sent to stdout. No object file is produced.
        </p>
      </item>
      <tag>-MF <em>Makefile</em></tag>
      <item>
        <p>Like the <c><![CDATA[-M]]></c> option above, except that the
          Makefile is written to <em>Makefile</em>. No object
          file is produced.
        </p>
      </item>
      <tag>-MD</tag>
      <item>
        <p>Same as <c><![CDATA[-M -MF <File>.Pbeam]]></c>.
        </p>
      </item>
      <tag>-MT <em>Target</em></tag>
      <item>
        <p>In conjunction with <c><![CDATA[-M]]></c> or
          <c><![CDATA[-MF]]></c>, change the name of the rule emitted
          to <em>Target</em>.
        </p>
      </item>
      <tag>-MQ <em>Target</em></tag>
      <item>
        <p>Like the <c><![CDATA[-MT]]></c> option above, except that
          characters special to make(1) are quoted.
        </p>
      </item>
      <tag>-MP</tag>
      <item>
        <p>In conjunction with <c><![CDATA[-M]]></c> or
          <c><![CDATA[-MF]]></c>, add a phony target for each dependency.
        </p>
      </item>
      <tag>-MG</tag>
      <item>
        <p>In conjunction with <c><![CDATA[-M]]></c> or
          <c><![CDATA[-MF]]></c>, consider missing headers as generated
          files and add them to the dependencies.
        </p>
      </item>
      <tag>--</tag>
      <item>
        <p>Signals that no more options will follow.
          The rest of the arguments will be treated as file names,
          even if they start with hyphens.</p>
      </item>
      <tag>+<em>term</em></tag>
      <item>
        <p>A flag starting with a plus ('<em>+</em>') rather than a hyphen
          will be converted to an Erlang term and passed unchanged to
          the compiler.
          For instance, the <c><![CDATA[export_all]]></c> option for the Erlang
          compiler can be specified as follows:</p>
        <pre>
erlc +export_all file.erl</pre>
        <p>Depending on the platform, the value may need to be
          quoted if the shell itself interprets certain characters.
          On Unix, terms which contain tuples and list
          must be quoted. Terms which contain spaces
          must be quoted on all platforms.</p>
      </item>
    </taglist>
  </section>

  <section>
    <title>Special Flags</title>
    <p>The flags in this section are useful in special situations
      such as re-building the OTP system.</p>
    <taglist>
      <tag>-pa <em>directory</em></tag>
      <item>
        <p>Appends <em>directory</em> to the front of the code path in
          the invoked Erlang emulator.
          This can be used to invoke another
          compiler than the default one.</p>
      </item>
      <tag>-pz <em>directory</em></tag>
      <item>
        <p>Appends <em>directory</em> to the code path in
          the invoked Erlang emulator.</p>
      </item>
    </taglist>
  </section>

  <section>
    <title>Supported Compilers</title>
    <taglist>
      <tag>.erl</tag>
      <item>
        <p>Erlang source code. It generates a <c><![CDATA[.beam]]></c> file.</p>
        <p>The options -P, -E, and -S are equivalent to +'P',
          +'E', and +'S', except that it is not necessary to include the single quotes to protect them
          from the shell.</p>
        <p>Supported options: -I, -o, -D, -v, -W, -b.</p>
      </item>
      <tag>.S</tag>
      <item>
        <p>Erlang assembler source code. It generates a <c><![CDATA[.beam]]></c> file.</p>
        <p>Supported options: same as for .erl.</p>
      </item>
      <tag>.core</tag>
      <item>
        <p>Erlang core source code. It generates a <c><![CDATA[.beam]]></c> file.</p>
        <p>Supported options: same as for .erl.</p>
      </item>
      <tag>.yrl</tag>
      <item>
        <p>Yecc source code. It generates an <c><![CDATA[.erl]]></c> file.</p>
        <p>Use the -I option with the name of a file to use that file
          as a customized prologue file (the <c><![CDATA[includefile]]></c> option).</p>
        <p>Supported options: -o, -v, -I, -W (see above).</p>
      </item>
      <tag>.mib</tag>
      <item>
        <p>MIB for SNMP. It generates a <c><![CDATA[.bin]]></c> file.</p>
        <p>Supported options: -I, -o, -W.</p>
      </item>
      <tag>.bin</tag>
      <item>
        <p>A compiled MIB for SNMP. It generates a <c><![CDATA[.hrl]]></c> file.</p>
        <p>Supported options: -o, -v.</p>
      </item>
      <tag>.rel</tag>
      <item>
        <p>Script file. It generates a boot file.</p>
        <p>Use the -I to name directories to be searched for application
          files (equivalent to the <c><![CDATA[path]]></c> in the option list for
          <c><![CDATA[systools:make_script/2]]></c>).</p>
        <p>Supported options: -o.</p>
      </item>
      <tag>.asn1</tag>
      <item>
        <p>ASN1 file.</p>
        <p>Creates an <c><![CDATA[.erl]]></c>, <c><![CDATA[.hrl]]></c>, and <c><![CDATA[.asn1db]]></c> file from
          an <c><![CDATA[.asn1]]></c> file. Also compiles the <c><![CDATA[.erl]]></c> using the Erlang
          compiler unless the <c><![CDATA[+noobj]]></c> options is given.</p>
        <p>Supported options: -I, -o, -b, -W.</p>
      </item>
      <tag>.idl</tag>
      <item>
        <p>IC file.</p>
        <p>Runs the IDL compiler.</p>
        <p>Supported options: -I, -o.</p>
      </item>
    </taglist>
  </section>

  <section>
    <title>Environment Variables</title>
    <taglist>
      <tag>ERLC_EMULATOR</tag>
      <item>The command for starting the emulator.
       Default is <em>erl</em> in the same directory as the <em>erlc</em> program
       itself, or if it doesn't exist, <em>erl</em> in any of the directories
       given in the <em>PATH</em> environment variable.</item>
    </taglist>
  </section>

  <section>
    <title>SEE ALSO</title>
    <p><seealso marker="erl">erl(1)</seealso>,
      <seealso marker="compiler:compile">compile(3)</seealso>,
      <seealso marker="parsetools:yecc">yecc(3)</seealso>,
      <seealso marker="snmp:snmp">snmp(3)</seealso></p>
  </section>
</comref>