<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">

<erlref>
  <header>
    <copyright>
      <year>1996</year><year>2013</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at
 
          http://www.apache.org/licenses/LICENSE-2.0

      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.
    
    </legalnotice>

    <title>init</title>
    <prepared></prepared>
    <docno></docno>
    <date></date>
    <rev></rev>
    <file>init.xml</file>
  </header>
  <module>init</module>
  <modulesummary>Coordination of System Startup</modulesummary>
  <description>
    <p>The <c>init</c> module is pre-loaded and contains the code for
      the <c>init</c> system process which coordinates the start-up of
      the system. The first function evaluated at start-up is
      <c>boot(BootArgs)</c>, where <c>BootArgs</c> is a list of command
      line arguments supplied to the Erlang runtime system from
      the local operating system. See
      <seealso marker="erts:erl">erl(1)</seealso>.</p>
    <p><c>init</c> reads the boot script which contains instructions on
      how to initiate the system. See
      <seealso marker="sasl:script">script(4)</seealso> for more
      information about boot scripts.</p>
    <p><c>init</c> also contains functions to restart, reboot, and stop
      the system.</p>
  </description>
  <funcs>
    <func>
      <name name="boot" arity="1"/>
      <fsummary>Start the Erlang runtime system</fsummary>
      <desc>
        <p>Starts the Erlang runtime system. This function is called
          when the emulator is started and coordinates system start-up.</p>
        <p><c><anno>BootArgs</anno></c> are all command line arguments except
          the emulator flags, that is, flags and plain arguments. See
          <seealso marker="erts:erl">erl(1)</seealso>.</p>
        <p><c>init</c> itself interprets some of the flags, see
          <seealso marker="#flags">Command Line Flags</seealso> below.
          The remaining flags ("user flags") and plain arguments are
          passed to the <c>init</c> loop and can be retrieved by calling
          <c>get_arguments/0</c> and <c>get_plain_arguments/0</c>,
          respectively.</p>
      </desc>
    </func>
    <func>
      <name name="get_argument" arity="1"/>
      <fsummary>Get the values associated with a command line user flag</fsummary>
      <desc>
        <p>Returns all values associated with the command line user flag
          <c><anno>Flag</anno></c>. If <c><anno>Flag</anno></c> is provided several times, each
          <c><anno>Values</anno></c> is returned in preserved order.</p>
        <pre>
% <input>erl -a b c -a d</input>
...
1> <input>init:get_argument(a).</input>
{ok,[["b","c"],["d"]]}</pre>
        <p>There are also a number of flags, which are defined
          automatically and can be retrieved using this function:</p>
        <taglist>
          <tag><c>root</c></tag>
          <item>
            <p>The installation directory of Erlang/OTP, <c>$ROOT</c>.</p>
            <pre>
2> <input>init:get_argument(root).</input>
{ok,[["/usr/local/otp/releases/otp_beam_solaris8_r10b_patched"]]}</pre>
          </item>
          <tag><c>progname</c></tag>
          <item>
            <p>The name of the program which started Erlang.</p>
            <pre>
3> <input>init:get_argument(progname).</input>
{ok,[["erl"]]}</pre>
          </item>
          <tag><c>home</c></tag>
          <item>
            <p>The home directory.</p>
            <pre>
4> <input>init:get_argument(home).</input>
{ok,[["/home/harry"]]}</pre>
          </item>
        </taglist>
        <p>Returns <c>error</c> if there is no value associated with
          <c>Flag</c>.</p>
      </desc>
    </func>
    <func>
      <name name="get_arguments" arity="0"/>
      <fsummary>Get all command line user flags</fsummary>
      <desc>
        <p>Returns all command line flags, as well as the system
          defined flags, see <c>get_argument/1</c>.</p>
      </desc>
    </func>
    <func>
      <name name="get_plain_arguments" arity="0"/>
      <fsummary>Get all non-flag command line arguments</fsummary>
      <desc>
        <p>Returns any plain command line arguments as a list of strings
          (possibly empty).</p>
      </desc>
    </func>
    <func>
      <name name="get_status" arity="0"/>
      <fsummary>Get system status information</fsummary>
      <type name="internal_status"/>
      <desc>
        <p>The current status of the <c>init</c> process can be
          inspected. During system startup (initialization),
          <c><anno>InternalStatus</anno></c> is <c>starting</c>, and
          <c><anno>ProvidedStatus</anno></c> indicates how far the boot script has
          been interpreted. Each <c>{progress, Info}</c> term
          interpreted in the boot script affects <c><anno>ProvidedStatus</anno></c>,
          that is, <c><anno>ProvidedStatus</anno></c> gets the value of <c>Info</c>.</p>
      </desc>
    </func>
    <func>
      <name name="reboot" arity="0"/>
      <fsummary>Take down and restart an Erlang node smoothly</fsummary>
      <desc>
        <p>All applications are taken down smoothly, all code is
          unloaded, and all ports are closed before the system
          terminates. If the <c>-heart</c> command line flag was given,
          the <c>heart</c> program will try to reboot the system. Refer
          to <c>heart(3)</c> for more information.</p>
        <p>To limit the shutdown time, the time <c>init</c> is allowed
          to spend taking down applications, the <c>-shutdown_time</c>
          command line flag should be used.</p>
      </desc>
    </func>
    <func>
      <name name="restart" arity="0"/>
      <fsummary>Restart the running Erlang node</fsummary>
      <desc>
        <p>The system is restarted <em>inside</em> the running Erlang
          node, which means that the emulator is not restarted. All
          applications are taken down smoothly, all code is unloaded,
          and all ports are closed before the system is booted again in
          the same way as initially started. The same <c>BootArgs</c>
          are used again.</p>
        <p>To limit the shutdown time, the time <c>init</c> is allowed
          to spend taking down applications, the <c>-shutdown_time</c>
          command line flag should be used.</p>
      </desc>
    </func>
    <func>
      <name name="script_id" arity="0"/>
      <fsummary>Get the identity of the used boot script</fsummary>
      <desc>
        <p>Get the identity of the boot script used to boot the system.
          <c><anno>Id</anno></c> can be any Erlang term. In the delivered boot
          scripts, <c><anno>Id</anno></c> is <c>{Name, Vsn}</c>. <c>Name</c> and
          <c>Vsn</c> are strings.</p>
      </desc>
    </func>
    <func>
      <name name="stop" arity="0"/>
      <fsummary>Take down an Erlang node smoothly</fsummary>
      <desc>
        <p>All applications are taken down smoothly, all code is
          unloaded, and all ports are closed before the system
          terminates. If the <c>-heart</c> command line flag was given, 
          the <c>heart</c> program is terminated before the Erlang node
          terminates. Refer to <c>heart(3)</c> for more information.</p>
        <p>To limit the shutdown time, the time <c>init</c> is allowed
          to spend taking down applications, the <c>-shutdown_time</c>
          command line flag should be used.</p>
      </desc>
    </func>
    <func>
      <name name="stop" arity="1"/>
      <fsummary>Take down an Erlang node smoothly</fsummary>
      <desc>
        <p>All applications are taken down smoothly, all code is
          unloaded, and all ports are closed before the system
          terminates by calling <c>halt(<anno>Status</anno>)</c>. If the
          <c>-heart</c> command line flag was given, the <c>heart</c>
          program is terminated before the Erlang node
          terminates. Refer to <c>heart(3)</c> for more
          information.</p>
        <p>To limit the shutdown time, the time <c>init</c> is allowed
          to spend taking down applications, the <c>-shutdown_time</c>
          command line flag should be used.</p>
      </desc>
    </func>
  </funcs>

  <section>
    <marker id="flags"></marker>
    <title>Command Line Flags</title>
    <warning><p>The support for loading of code from archive files is
     experimental. The sole purpose of releasing it before it is ready
     is to obtain early feedback. The file format, semantics,
     interfaces etc. may be changed in a future release. The
     <c>-code_path_choice</c> flag is also experimental.</p></warning>

    <p>The <c>init</c> module interprets the following command line
      flags:</p>

    <taglist>
      <tag><c>--</c></tag>
      <item>
        <p>Everything following <c>--</c> up to the next flag is
          considered plain arguments and can be retrieved using
          <c>get_plain_arguments/0</c>.</p>
      </item>
      <tag><c>-code_path_choice Choice</c></tag>
      <item>
        <p>This flag can be set to <c>strict</c> or <c>relaxed</c>. It
         controls whether each directory in the code path should be
         interpreted strictly as it appears in the <c>boot script</c> or if
         <c>init</c> should be more relaxed and try to find a suitable
         directory if it can choose from a regular ebin directory and
         an ebin directory in an archive file. This flag is particular
         useful when you want to elaborate with code loading from
         archives without editing the <c>boot script</c>. See <seealso
         marker="sasl:script">script(4)</seealso> for more information
         about interpretation of boot scripts. The flag does also have
         a similar affect on how the code server works. See <seealso
         marker="kernel:code">code(3)</seealso>.</p>
	 
      </item>
      <tag><c>-eval Expr</c></tag>
      <item>
        <p>Scans, parses and evaluates an arbitrary expression
          <c>Expr</c> during system initialization. If any of these
          steps fail (syntax error, parse error or exception during
          evaluation), Erlang stops with an error message. Here is an
          example that seeds the random number generator:</p>
        <pre>
% <input>erl -eval '{X,Y,Z} = now(), random:seed(X,Y,Z).'</input></pre>
        <p>This example uses Erlang as a hexadecimal calculator:</p>
        <pre>
% <input>erl -noshell -eval 'R = 16#1F+16#A0, io:format("~.16B~n", [R])' \\</input>
<input>-s erlang halt</input>
BF</pre>
        <p>If multiple <c>-eval</c> expressions are specified, they
          are evaluated sequentially in the order specified.
          <c>-eval</c> expressions are evaluated sequentially with
          <c>-s</c> and <c>-run</c> function calls (this also in
          the order specified). As with <c>-s</c> and <c>-run</c>, an
          evaluation that does not terminate, blocks the system
          initialization process.</p>
      </item>
      <tag><c>-extra</c></tag>
      <item>
        <p>Everything following <c>-extra</c> is considered plain
          arguments and can be retrieved using
          <c>get_plain_arguments/0</c>.</p>
      </item>
      <tag><c>-run Mod [Func [Arg1, Arg2, ...]]</c></tag>
      <item>
        <p>Evaluates the specified function call during system
          initialization. <c>Func</c> defaults to <c>start</c>. If no
          arguments are provided, the function is assumed to be of arity
          0. Otherwise it is assumed to be of arity 1, taking the list
          <c>[Arg1,Arg2,...]</c> as argument. All arguments are passed
          as strings. If an exception is raised, Erlang stops with an
          error message.</p>
        <p>Example:</p>
        <pre>
% <input>erl -run foo -run foo bar -run foo bar baz 1 2</input></pre>
        <p>This starts the Erlang runtime system and evaluates
          the following functions:</p>
        <code type="none">
foo:start()
foo:bar()
foo:bar(["baz", "1", "2"]).</code>
        <p>The functions are executed sequentially in an initialization
          process, which then terminates normally and passes control to
          the user. This means that a <c>-run</c> call which does not
          return will block further processing; to avoid this, use
          some variant of <c>spawn</c> in such cases.</p>
      </item>
      <tag><c>-s Mod [Func [Arg1, Arg2, ...]]</c></tag>
      <item>
        <p>Evaluates the specified function call during system
          initialization. <c>Func</c> defaults to <c>start</c>. If no
          arguments are provided, the function is assumed to be of arity
          0. Otherwise it is assumed to be of arity 1, taking the list
          <c>[Arg1,Arg2,...]</c> as argument. All arguments are passed
          as atoms. If an exception is raised, Erlang stops with an
          error message.</p>
        <p>Example:</p>
        <pre>
% <input>erl -s foo -s foo bar -s foo bar baz 1 2</input></pre>
        <p>This starts the Erlang runtime system and evaluates
          the following functions:</p>
        <code type="none">
foo:start()
foo:bar()
foo:bar([baz, '1', '2']).</code>
        <p>The functions are executed sequentially in an initialization
          process, which then terminates normally and passes control to
          the user. This means that a <c>-s</c> call which does not
          return will block further processing; to avoid this, use
          some variant of <c>spawn</c> in such cases.</p>
        <p>Due to the limited length of atoms, it is recommended that
          <c>-run</c> be used instead.</p>
      </item>
    </taglist>
  </section>

  <section>
    <title>Example</title>
    <pre>
% <input>erl -- a b -children thomas claire -ages 7 3 -- x y</input>
...

1> <input>init:get_plain_arguments().</input>
["a","b","x","y"]
2> <input>init:get_argument(children).</input>
{ok,[["thomas","claire"]]}
3> <input>init:get_argument(ages).</input>
{ok, [["7","3"]]}
4> <input>init:get_argument(silly).</input>
error</pre>
  </section>

  <section>
    <title>SEE ALSO</title>
    <p><seealso marker="erl_prim_loader">erl_prim_loader(3)</seealso>, 
      <seealso marker="kernel:heart">heart(3)</seealso></p>
  </section>
</erlref>