changecom(`/*', `*/')dnl /* * %CopyrightBegin% * * Copyright Ericsson AB 2001-2016. All Rights Reserved. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * %CopyrightEnd% */ #`define ASM' include(`hipe/hipe_sparc_asm.m4') #`include' "config.h" #`include' "hipe_literals.h" .section ".text" .align 4 `#if defined(ERTS_ENABLE_LOCK_CHECK) && defined(ERTS_SMP) # define CALL_BIF(F) set F, %o7; st %o7, [%o0+P_BIF_CALLEE]; call hipe_debug_bif_wrapper #else # define CALL_BIF(F) call F #endif' /* * Test for exception. This macro executes its delay slot. */ define(TEST_GOT_EXN,`cmp %o0, THE_NON_VALUE ! `TEST_GOT_EXN' bz,pn %icc, nbif_$1_simple_exception') define(TEST_GOT_MBUF,`ld [P+P_MBUF], %o1 ! `TEST_GOT_MBUF' cmp %o1, 0 bne 3f nop 2:') define(HANDLE_GOT_MBUF,` 3: call nbif_$1_gc_after_bif ! `HANDLE_GOT_MBUF' nop b 2b nop') /* * standard_bif_interface_1(nbif_name, cbif_name) * standard_bif_interface_2(nbif_name, cbif_name) * standard_bif_interface_3(nbif_name, cbif_name) * standard_bif_interface_4(nbif_name, cbif_name) * standard_bif_interface_0(nbif_name, cbif_name) * * Generate native interface for a BIF with 0-4 parameters and * standard failure mode. */ define(standard_bif_interface_1, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,1,0) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_BIF st %o1, [%o0+P_ARG0] ! Store BIF__ARGS in def_arg_reg add %o0, P_ARG0, %o1 CALL_BIF($2) nop TEST_GOT_MBUF /* Restore registers. Check for exception. */ TEST_GOT_EXN(1) RESTORE_CONTEXT_BIF NBIF_RET(1) HANDLE_GOT_MBUF(1) .size $1, .-$1 .type $1, #function #endif') define(standard_bif_interface_2, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,2,0) NBIF_ARG(%o2,2,1) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_BIF st %o1, [%o0+P_ARG0] ! Store BIF__ARGS in def_arg_reg st %o2, [%o0+P_ARG1] add %o0, P_ARG0, %o1 CALL_BIF($2) nop TEST_GOT_MBUF /* Restore registers. Check for exception. */ TEST_GOT_EXN(2) RESTORE_CONTEXT_BIF NBIF_RET(2) HANDLE_GOT_MBUF(2) .size $1, .-$1 .type $1, #function #endif') define(standard_bif_interface_3, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,3,0) NBIF_ARG(%o2,3,1) NBIF_ARG(%o3,3,2) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_BIF st %o1, [%o0+P_ARG0] ! Store BIF__ARGS in def_arg_reg st %o2, [%o0+P_ARG1] st %o3, [%o0+P_ARG2] add %o0, P_ARG0, %o1 CALL_BIF($2) nop TEST_GOT_MBUF /* Restore registers. Check for exception. */ TEST_GOT_EXN(3) RESTORE_CONTEXT_BIF NBIF_RET(3) HANDLE_GOT_MBUF(3) .size $1, .-$1 .type $1, #function #endif') define(standard_bif_interface_4, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,4,0) NBIF_ARG(%o2,4,1) NBIF_ARG(%o3,4,2) NBIF_ARG(%o4,4,3) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_BIF st %o1, [%o0+P_ARG0] ! Store BIF__ARGS in def_arg_reg st %o2, [%o0+P_ARG1] st %o3, [%o0+P_ARG2] st %o4, [%o0+P_ARG3] add %o0, P_ARG0, %o1 CALL_BIF($2) nop TEST_GOT_MBUF /* Restore registers. Check for exception. */ TEST_GOT_EXN(4) RESTORE_CONTEXT_BIF NBIF_RET(4) HANDLE_GOT_MBUF(4) .size $1, .-$1 .type $1, #function #endif') define(standard_bif_interface_0, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_BIF /* ignore empty BIF__ARGS */ CALL_BIF($2) nop TEST_GOT_MBUF /* Restore registers. Check for exception. */ TEST_GOT_EXN(0) RESTORE_CONTEXT_BIF NBIF_RET(0) HANDLE_GOT_MBUF(0) .size $1, .-$1 .type $1, #function #endif') /* * gc_bif_interface_0(nbif_name, cbif_name) * gc_bif_interface_1(nbif_name, cbif_name) * gc_bif_interface_2(nbif_name, cbif_name) * * Generate native interface for a BIF with 0-2 parameters and * standard failure mode. * The BIF may do a GC. */ define(gc_bif_interface_0, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_GC /* ignore empty BIF__ARGS */ CALL_BIF($2) nop TEST_GOT_MBUF /* Restore registers. */ RESTORE_CONTEXT_GC NBIF_RET(0) HANDLE_GOT_MBUF(0) .size $1, .-$1 .type $1, #function #endif') define(gc_bif_interface_1, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,1,0) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_GC st %o1, [%o0+P_ARG0] ! Store BIF__ARGS in def_arg_reg add %o0, P_ARG0, %o1 CALL_BIF($2) nop TEST_GOT_MBUF /* Restore registers. Check for exception. */ TEST_GOT_EXN(1) RESTORE_CONTEXT_GC NBIF_RET(1) HANDLE_GOT_MBUF(1) .size $1, .-$1 .type $1, #function #endif') define(gc_bif_interface_2, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,2,0) NBIF_ARG(%o2,2,1) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_GC st %o1, [%o0+P_ARG0] ! Store BIF__ARGS in def_arg_reg st %o2, [%o0+P_ARG1] add %o0, P_ARG0, %o1 CALL_BIF($2) nop TEST_GOT_MBUF /* Restore registers. Check for exception. */ TEST_GOT_EXN(2) RESTORE_CONTEXT_GC NBIF_RET(2) HANDLE_GOT_MBUF(2) .size $1, .-$1 .type $1, #function #endif') /* * gc_nofail_primop_interface_1(nbif_name, cbif_name) * * Generate native interface for a primop with implicit P * parameter, 1 ordinary parameter and no failure mode. * The primop may do a GC. */ define(gc_nofail_primop_interface_1, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,1,0) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_GC call $2 nop /* Restore register. */ RESTORE_CONTEXT_GC NBIF_RET(1) .size $1, .-$1 .type $1, #function #endif') /* * nofail_primop_interface_0(nbif_name, cbif_name) * nofail_primop_interface_1(nbif_name, cbif_name) * nofail_primop_interface_2(nbif_name, cbif_name) * nofail_primop_interface_3(nbif_name, cbif_name) * * Generate native interface for a primop with implicit P * parameter, 0-3 ordinary parameters and no failure mode. * Also used for guard BIFs. */ define(nofail_primop_interface_0, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_BIF call $2 nop TEST_GOT_MBUF /* Restore registers. */ RESTORE_CONTEXT_BIF NBIF_RET(0) HANDLE_GOT_MBUF(0) .size $1, .-$1 .type $1, #function #endif') define(nofail_primop_interface_1, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,1,0) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_BIF call $2 nop TEST_GOT_MBUF /* Restore registers. */ RESTORE_CONTEXT_BIF NBIF_RET(1) HANDLE_GOT_MBUF(1) .size $1, .-$1 .type $1, #function #endif') define(nofail_primop_interface_2, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,2,0) NBIF_ARG(%o2,2,1) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_BIF call $2 nop TEST_GOT_MBUF /* Restore registers. */ RESTORE_CONTEXT_BIF NBIF_RET(2) HANDLE_GOT_MBUF(2) .size $1, .-$1 .type $1, #function #endif') define(nofail_primop_interface_3, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,3,0) NBIF_ARG(%o2,3,1) NBIF_ARG(%o3,3,2) /* Save caller-save registers and call the C function. */ SAVE_CONTEXT_BIF call $2 nop TEST_GOT_MBUF /* Restore registers. */ RESTORE_CONTEXT_BIF NBIF_RET(3) HANDLE_GOT_MBUF(3) .size $1, .-$1 .type $1, #function #endif') /* * nocons_nofail_primop_interface_0(nbif_name, cbif_name) * nocons_nofail_primop_interface_1(nbif_name, cbif_name) * nocons_nofail_primop_interface_2(nbif_name, cbif_name) * nocons_nofail_primop_interface_3(nbif_name, cbif_name) * nocons_nofail_primop_interface_5(nbif_name, cbif_name) * * Generate native interface for a primop with implicit P * parameter, 0-3 or 5 ordinary parameters, and no failure mode. * The primop cannot CONS or gc. */ define(nocons_nofail_primop_interface_0, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,0) nop .size $1, .-$1 .type $1, #function #endif') define(nocons_nofail_primop_interface_1, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,1,0) /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,1) nop .size $1, .-$1 .type $1, #function #endif') define(nocons_nofail_primop_interface_2, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,2,0) NBIF_ARG(%o2,2,1) /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,2) nop .size $1, .-$1 .type $1, #function #endif') define(nocons_nofail_primop_interface_3, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,3,0) NBIF_ARG(%o2,3,1) NBIF_ARG(%o3,3,2) /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,3) nop .size $1, .-$1 .type $1, #function #endif') define(nocons_nofail_primop_interface_5, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ mov P, %o0 NBIF_ARG(%o1,5,0) NBIF_ARG(%o2,5,1) NBIF_ARG(%o3,5,2) NBIF_ARG(%o4,5,3) NBIF_ARG(%o5,5,4) /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,5) nop .size $1, .-$1 .type $1, #function #endif') /* * noproc_primop_interface_0(nbif_name, cbif_name) * noproc_primop_interface_1(nbif_name, cbif_name) * noproc_primop_interface_2(nbif_name, cbif_name) * noproc_primop_interface_3(nbif_name, cbif_name) * noproc_primop_interface_5(nbif_name, cbif_name) * * Generate native interface for a primop with no implicit P * parameter, 0-3 or 5 ordinary parameters, and no failure mode. * The primop cannot CONS or gc. */ define(noproc_primop_interface_0, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* XXX: this case is always trivial; how to suppress the branch? */ /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,0) nop .size $1, .-$1 .type $1, #function #endif') define(noproc_primop_interface_1, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ NBIF_ARG(%o0,1,0) /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,1) nop .size $1, .-$1 .type $1, #function #endif') define(noproc_primop_interface_2, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ NBIF_ARG(%o0,2,0) NBIF_ARG(%o1,2,1) /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,2) nop .size $1, .-$1 .type $1, #function #endif') define(noproc_primop_interface_3, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ NBIF_ARG(%o0,3,0) NBIF_ARG(%o1,3,1) NBIF_ARG(%o2,3,2) /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,3) nop .size $1, .-$1 .type $1, #function #endif') define(noproc_primop_interface_5, ` #ifndef HAVE_$1 #`define' HAVE_$1 .global $1 $1: /* Set up C argument registers. */ NBIF_ARG(%o0,5,0) NBIF_ARG(%o1,5,1) NBIF_ARG(%o2,5,2) NBIF_ARG(%o3,5,3) NBIF_ARG(%o4,5,4) /* Perform a quick save;call;restore;ret sequence. */ QUICK_CALL_RET($2,5) nop .size $1, .-$1 .type $1, #function #endif') include(`hipe/hipe_bif_list.m4') `#if defined(__linux__) && defined(__ELF__) .section .note.GNU-stack,"",%progbits #endif'