%% %% %CopyrightBegin% %% %% Copyright Ericsson AB 1996-2016. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. %% You may obtain a copy of the License at %% %% http://www.apache.org/licenses/LICENSE-2.0 %% %% Unless required by applicable law or agreed to in writing, software %% distributed under the License is distributed on an "AS IS" BASIS, %% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. %% See the License for the specific language governing permissions and %% limitations under the License. %% %% %CopyrightEnd% %% %% A primary loader, provides two different methods to fetch a file: %% efile and inet. The efile method is simple communication with a %% port program. %% %% The distribution loading was removed and replaced with %% inet loading %% %% The start_it/4 function initializes a record with callback %% functions used to handle the interface functions. %% -module(erl_prim_loader). %% If the macro DEBUG is defined during compilation, %% debug printouts are done through erlang:display/1. %% Activate this feature by starting the compiler %% with> erlc -DDEBUG ... %% or by> setenv ERL_COMPILER_FLAGS DEBUG %% before running make (in the OTP make system) %% (the example is for tcsh) -include("inet_boot.hrl"). %% Public -export([start/0, set_path/1, get_path/0, get_file/1, list_dir/1, read_file_info/1, read_link_info/1, get_cwd/0, get_cwd/1]). %% Used by erl_boot_server -export([prim_init/0, prim_get_file/2, prim_list_dir/2, prim_read_file_info/3, prim_get_cwd/2]). %% Used by escript and code -export([set_primary_archive/4]). %% Used by test suites -export([purge_archive_cache/0]). %% Used by init and the code server. -export([get_modules/2,get_modules/3, is_basename/1]). -include_lib("kernel/include/file.hrl"). -type host() :: atom(). -record(prim_state, {debug :: boolean(), primary_archive}). -type prim_state() :: #prim_state{}. -record(state, {loader :: 'efile' | 'inet', hosts = [] :: [host()], % hosts list (to boot from) data :: 'noport' | port(), % data port etc timeout :: timeout(), % idle timeout prim_state :: prim_state()}). % state for efile code loader -define(EFILE_IDLE_TIMEOUT, (6*60*1000)). %purge archives -define(INET_IDLE_TIMEOUT, (60*1000)). %tear down connection timeout %% Defines for inet as prim_loader -define(INET_FAMILY, inet). -define(INET_ADDRESS, {0,0,0,0}). -ifdef(DEBUG). -define(dbg(Tag, Data), erlang:display({Tag,Data})). -else. -define(dbg(Tag, Data), true). -endif. -define(SAFE2(Expr, State), fun() -> case catch Expr of {'EXIT',XXXReason} -> {{error,XXXReason}, State}; XXXRes -> XXXRes end end()). debug(#prim_state{debug = Deb}, Term) -> case Deb of false -> ok; true -> erlang:display(Term) end. %%% -------------------------------------------------------- %%% Interface Functions. %%% -------------------------------------------------------- -spec start() -> {'ok', Pid} | {'error', What} when Pid :: pid(), What :: term(). start() -> Self = self(), Pid = spawn_link(fun() -> start_it(Self) end), receive {Pid,ok} -> {ok,Pid}; {'EXIT',Pid,Reason} -> {error,Reason} end. start_it(Parent) -> process_flag(trap_exit, true), register(erl_prim_loader, self()), Loader = case init:get_argument(loader) of {ok,[[Loader0]]} -> Loader0; error -> "efile" end, case Loader of "efile" -> start_efile(Parent); "inet" -> start_inet(Parent) end. %% Hosts must be a list of form ['1.2.3.4' ...] start_inet(Parent) -> Hosts = case init:get_argument(hosts) of {ok,[Hosts0]} -> Hosts0; _ -> [] end, AL = ipv4_list(Hosts), ?dbg(addresses, AL), {ok,Tcp} = find_master(AL), init_ack(Parent), PS = prim_init(), State = #state {loader = inet, hosts = AL, data = Tcp, timeout = ?INET_IDLE_TIMEOUT, prim_state = PS}, loop(State, Parent, []). start_efile(Parent) -> %% Check that we started in a valid directory. case prim_file:get_cwd() of {error, _} -> %% At this point in the startup, we have no error_logger at all. Report = "Invalid current directory or invalid filename " "mode: loader cannot read current directory\n", erlang:display(Report), exit({error, invalid_current_directory}); _ -> init_ack(Parent) end, PS = prim_init(), State = #state {loader = efile, data = noport, timeout = ?EFILE_IDLE_TIMEOUT, prim_state = PS}, loop(State, Parent, []). init_ack(Pid) -> Pid ! {self(),ok}, ok. -spec set_path(Path) -> 'ok' when Path :: [Dir :: string()]. set_path(Paths) when is_list(Paths) -> request({set_path,Paths}). -spec get_path() -> {'ok', Path} when Path :: [Dir :: string()]. get_path() -> request({get_path,[]}). -spec get_file(Filename) -> {'ok', Bin, FullName} | 'error' when Filename :: atom() | string(), Bin :: binary(), FullName :: string(). get_file(File) when is_atom(File) -> get_file(atom_to_list(File)); get_file(File) -> check_file_result(get_file, File, request({get_file,File})). -spec list_dir(Dir) -> {'ok', Filenames} | 'error' when Dir :: string(), Filenames :: [Filename :: string()]. list_dir(Dir) -> check_file_result(list_dir, Dir, request({list_dir,Dir})). -spec read_file_info(Filename) -> {'ok', FileInfo} | 'error' when Filename :: string(), FileInfo :: file:file_info(). read_file_info(File) -> check_file_result(read_file_info, File, request({read_file_info,File})). -spec read_link_info(Filename) -> {'ok', FileInfo} | 'error' when Filename :: string(), FileInfo :: file:file_info(). read_link_info(File) -> check_file_result(read_link_info, File, request({read_link_info,File})). -spec get_cwd() -> {'ok', string()} | 'error'. get_cwd() -> check_file_result(get_cwd, [], request({get_cwd,[]})). -spec get_cwd(string()) -> {'ok', string()} | 'error'. get_cwd(Drive) -> check_file_result(get_cwd, Drive, request({get_cwd,[Drive]})). -spec set_primary_archive(File :: string() | 'undefined', ArchiveBin :: binary() | 'undefined', FileInfo :: #file_info{} | 'undefined', ParserFun :: fun()) -> {ok, [string()]} | {error,_}. set_primary_archive(undefined, undefined, undefined, ParserFun) -> request({set_primary_archive, undefined, undefined, undefined, ParserFun}); set_primary_archive(File, ArchiveBin, FileInfo, ParserFun) when is_list(File), is_binary(ArchiveBin), is_record(FileInfo, file_info) -> request({set_primary_archive, File, ArchiveBin, FileInfo, ParserFun}). %% NOTE: Does not close the primary archive. Only closes all %% open zip files kept in the cache. Should be called before an archive %% file is to be removed (for example in the test suites). -spec purge_archive_cache() -> 'ok' | {'error', _}. purge_archive_cache() -> request(purge_archive_cache). -spec get_modules([module()], fun((atom(), string(), binary()) -> {'ok',any()} | {'error',any()})) -> {'ok',{[any()],[any()]}}. get_modules(Modules, Fun) -> request({get_modules,{Modules,Fun}}). -spec get_modules([module()], fun((atom(), string(), binary()) -> {'ok',any()} | {'error',any()}), [string()]) -> {'ok',{[any()],[any()]}}. get_modules(Modules, Fun, Path) -> request({get_modules,{Modules,Fun,Path}}). request(Req) -> Loader = whereis(erl_prim_loader), Loader ! {self(),Req}, receive {Loader,Res} -> Res; {'EXIT',Loader,_What} -> error end. check_file_result(_, _, {error,enoent}) -> error; check_file_result(_, _, {error,enotdir}) -> error; check_file_result(_, _, {error,einval}) -> error; check_file_result(Func, Target, {error,Reason}) -> case (catch atom_to_list(Reason)) of {'EXIT',_} -> % exit trapped error; Errno -> % errno Process = case process_info(self(), registered_name) of {registered_name,R} -> "Process: " ++ atom_to_list(R) ++ "."; _ -> "" end, TargetStr = if is_atom(Target) -> atom_to_list(Target); is_list(Target) -> Target; true -> [] end, Report = case TargetStr of [] -> "File operation error: " ++ Errno ++ ". " ++ "Function: " ++ atom_to_list(Func) ++ ". " ++ Process; _ -> "File operation error: " ++ Errno ++ ". " ++ "Target: " ++ TargetStr ++ ". " ++ "Function: " ++ atom_to_list(Func) ++ ". " ++ Process end, %% this is equal to calling error_logger:error_report/1 which %% we don't want to do from code_server during system boot error_logger ! {notify,{error_report,group_leader(), {self(),std_error,Report}}}, error end; check_file_result(_, _, Other) -> Other. %%% -------------------------------------------------------- %%% The main loop. %%% -------------------------------------------------------- loop(St0, Parent, Paths) -> receive {Pid,{set_path,NewPaths}} when is_pid(Pid) -> Pid ! {self(),ok}, loop(St0, Parent, to_strs(NewPaths)); {Pid,Req} when is_pid(Pid) -> case handle_request(Req, Paths, St0) of ignore -> ok; {Resp,#state{}=St1} -> Pid ! {self(),Resp}, loop(St1, Parent, Paths); {_,State2,_} -> exit({bad_state,Req,State2}) end; {'EXIT',Parent,W} -> _ = handle_stop(St0), exit(W); {'EXIT',P,W} -> St1 = handle_exit(St0, P, W), loop(St1, Parent, Paths); _Message -> loop(St0, Parent, Paths) after St0#state.timeout -> St1 = handle_timeout(St0, Parent), loop(St1, Parent, Paths) end. handle_request(Req, Paths, St0) -> case Req of {get_path,_} -> {{ok,Paths},St0}; {get_file,File} -> handle_get_file(St0, Paths, File); {get_modules,{Modules,Fun}} -> handle_get_modules(St0, Modules, Fun, Paths); {get_modules,{Modules,Fun,ModPaths}} -> handle_get_modules(St0, Modules, Fun, ModPaths); {list_dir,Dir} -> handle_list_dir(St0, Dir); {read_file_info,File} -> handle_read_file_info(St0, File); {read_link_info,File} -> handle_read_link_info(St0, File); {get_cwd,[]} -> handle_get_cwd(St0, []); {get_cwd,[_]=Args} -> handle_get_cwd(St0, Args); {set_primary_archive,File,ArchiveBin,FileInfo,ParserFun} -> handle_set_primary_archive(St0, File, ArchiveBin, FileInfo, ParserFun); purge_archive_cache -> handle_purge_archive_cache(St0); _ -> ignore end. handle_get_file(State = #state{loader = efile}, Paths, File) -> ?SAFE2(efile_get_file_from_port(State, File, Paths), State); handle_get_file(State = #state{loader = inet}, Paths, File) -> ?SAFE2(inet_get_file_from_port(State, File, Paths), State). handle_set_primary_archive(State= #state{loader = efile}, File, ArchiveBin, FileInfo, ParserFun) -> ?SAFE2(efile_set_primary_archive(State, File, ArchiveBin, FileInfo, ParserFun), State). handle_purge_archive_cache(#state{loader = efile}=State) -> prim_purge_cache(), {ok,State}. handle_list_dir(State = #state{loader = efile}, Dir) -> ?SAFE2(efile_list_dir(State, Dir), State); handle_list_dir(State = #state{loader = inet}, Dir) -> ?SAFE2(inet_list_dir(State, Dir), State). handle_read_file_info(State = #state{loader = efile}, File) -> ?SAFE2(efile_read_file_info(State, File, true), State); handle_read_file_info(State = #state{loader = inet}, File) -> ?SAFE2(inet_read_file_info(State, File), State). handle_read_link_info(State = #state{loader = efile}, File) -> ?SAFE2(efile_read_file_info(State, File, false), State); handle_read_link_info(State = #state{loader = inet}, File) -> ?SAFE2(inet_read_link_info(State, File), State). handle_get_cwd(State = #state{loader = efile}, Drive) -> ?SAFE2(efile_get_cwd(State, Drive), State); handle_get_cwd(State = #state{loader = inet}, Drive) -> ?SAFE2(inet_get_cwd(State, Drive), State). handle_stop(State = #state{loader = efile}) -> State; handle_stop(State = #state{loader = inet}) -> inet_stop_port(State). handle_exit(State = #state{loader = efile}, _Who, _Reason) -> State; handle_exit(State = #state{loader = inet}, Who, Reason) -> inet_exit_port(State, Who, Reason). handle_timeout(State = #state{loader = efile}, Parent) -> efile_timeout_handler(State, Parent); handle_timeout(State = #state{loader = inet}, Parent) -> inet_timeout_handler(State, Parent). %%% -------------------------------------------------------- %%% Functions which handle efile as prim_loader (default). %%% -------------------------------------------------------- %% -> {{ok,BinFile,File},State} | {{error,Reason},State} efile_get_file_from_port(State, File, Paths) -> case is_basename(File) of false -> % get absolute file name. efile_get_file_from_port2(State, File); true when Paths =:= [] -> % get plain file name. efile_get_file_from_port2(State, File); true -> % use paths. efile_get_file_from_port3(State, File, Paths) end. efile_get_file_from_port2(#state{prim_state = PS} = State, File) -> {Res, PS2} = prim_get_file(PS, File), case Res of {error,port_died} -> exit('prim_load port died'); {error,Reason} -> {{error,Reason},State#state{prim_state = PS2}}; {ok,BinFile} -> {{ok,BinFile,File},State#state{prim_state = PS2}} end. efile_get_file_from_port3(State, File, [P | Paths]) -> case efile_get_file_from_port2(State, join(P, File)) of {{error,Reason},State1} when Reason =/= emfile -> case Paths of [] -> % return last error {{error,Reason},State1}; _ -> % try more paths efile_get_file_from_port3(State1, File, Paths) end; Result -> Result end; efile_get_file_from_port3(State, _File, []) -> {{error,enoent},State}. efile_set_primary_archive(#state{prim_state = PS} = State, File, ArchiveBin, FileInfo, ParserFun) -> {Res, PS2} = prim_set_primary_archive(PS, File, ArchiveBin, FileInfo, ParserFun), {Res,State#state{prim_state = PS2}}. efile_list_dir(#state{prim_state = PS} = State, Dir) -> {Res, PS2} = prim_list_dir(PS, Dir), {Res, State#state{prim_state = PS2}}. efile_read_file_info(#state{prim_state = PS} = State, File, FollowLinks) -> {Res, PS2} = prim_read_file_info(PS, File, FollowLinks), {Res, State#state{prim_state = PS2}}. efile_get_cwd(#state{prim_state = PS} = State, Drive) -> {Res, PS2} = prim_get_cwd(PS, Drive), {Res, State#state{prim_state = PS2}}. efile_timeout_handler(State, _Parent) -> prim_purge_cache(), State. %%% -------------------------------------------------------- %%% Read and process severals modules in parallel. %%% -------------------------------------------------------- handle_get_modules(#state{loader=efile}=St, Ms, Process, Paths) -> Primary = (St#state.prim_state)#prim_state.primary_archive, Res = case efile_any_archives(Paths, Primary) of false -> efile_get_mods_par(Ms, Process, Paths); true -> Get = fun efile_get_file_from_port/3, gm_get_mods(St, Get, Ms, Process, Paths) end, {Res,St}; handle_get_modules(#state{loader=inet}=St, Ms, Process, Paths) -> Get = fun inet_get_file_from_port/3, {gm_get_mods(St, Get, Ms, Process, Paths),St}. efile_get_mods_par(Ms, Process, Paths) -> Self = self(), Ref = make_ref(), GmSpawn = fun() -> efile_gm_spawn({Self,Ref}, Ms, Process, Paths) end, _ = spawn_link(GmSpawn), N = length(Ms), efile_gm_recv(N, Ref, [], []). efile_any_archives([H|T], Primary) -> case name_split(Primary, H) of {file,_} -> efile_any_archives(T, Primary); {archive,_,_} -> true end; efile_any_archives([], _) -> false. efile_gm_recv(0, _Ref, Succ, Fail) -> {ok,{Succ,Fail}}; efile_gm_recv(N, Ref, Succ, Fail) -> receive {Ref,Mod,{ok,Res}} -> efile_gm_recv(N-1, Ref, [{Mod,Res}|Succ], Fail); {Ref,Mod,{error,Res}} -> efile_gm_recv(N-1, Ref, Succ, [{Mod,Res}|Fail]) end. efile_gm_spawn(ParentRef, Ms, Process, Paths) -> efile_gm_spawn_1(0, Ms, ParentRef, Process, Paths). efile_gm_spawn_1(N, Ms, ParentRef, Process, Paths) when N >= 32 -> receive {'DOWN',_,process,_,_} -> efile_gm_spawn_1(N-1, Ms, ParentRef, Process, Paths) end; efile_gm_spawn_1(N, [M|Ms], ParentRef, Process, Paths) -> Get = fun() -> efile_gm_get(Paths, M, ParentRef, Process) end, _ = spawn_monitor(Get), efile_gm_spawn_1(N+1, Ms, ParentRef, Process, Paths); efile_gm_spawn_1(_, [], _, _, _) -> ok. efile_gm_get(Paths, Mod, ParentRef, Process) -> File = atom_to_list(Mod) ++ init:objfile_extension(), efile_gm_get_1(Paths, File, Mod, ParentRef, Process). efile_gm_get_1([P|Ps], File0, Mod, {Parent,Ref}=PR, Process) -> File = join(P, File0), try prim_file:read_file(File) of {ok,Bin} -> Res = gm_process(Mod, File, Bin, Process), Parent ! {Ref,Mod,Res}; Error -> _ = check_file_result(get_modules, File, Error), efile_gm_get_1(Ps, File0, Mod, PR, Process) catch _:Reason -> Res = {error,{crash,Reason}}, Parent ! {Ref,Mod,Res} end; efile_gm_get_1([], _, Mod, {Parent,Ref}, _Process) -> Parent ! {Ref,Mod,{error,enoent}}. gm_get_mods(St, Get, Ms, Process, Paths) -> gm_get_mods(St, Get, Ms, Process, Paths, [], []). gm_get_mods(St, Get, [M|Ms], Process, Paths, Succ, Fail) -> File = atom_to_list(M) ++ init:objfile_extension(), case gm_arch_get(St, Get, M, File, Paths, Process) of {ok,Res} -> gm_get_mods(St, Get, Ms, Process, Paths, [{M,Res}|Succ], Fail); {error,Res} -> gm_get_mods(St, Get, Ms, Process, Paths, Succ, [{M,Res}|Fail]) end; gm_get_mods(_St, _Get, [], _, _, Succ, Fail) -> {ok,{Succ,Fail}}. gm_arch_get(St, Get, Mod, File, Paths, Process) -> case Get(St, File, Paths) of {{error,_}=E,_} -> E; {{ok,Bin,Full},_} -> gm_process(Mod, Full, Bin, Process) end. gm_process(Mod, File, Bin, Process) -> try Process(Mod, File, Bin) of {ok,_}=Res -> Res; {error,_}=Res -> Res; Other -> {error,{bad_return,Other}} catch _:Error -> {error,{crash,Error}} end. %%% -------------------------------------------------------- %%% Functions which handle inet prim_loader %%% -------------------------------------------------------- %% %% Connect to a boot master %% return {ok, Socket} TCP %% AL is a list of boot servers (including broadcast addresses) %% find_master(AL) -> find_master(AL, ?EBOOT_RETRY, ?EBOOT_REQUEST_DELAY, ?EBOOT_SHORT_RETRY_SLEEP, ?EBOOT_UNSUCCESSFUL_TRIES, ?EBOOT_LONG_RETRY_SLEEP). find_master(AL, Retry, ReqDelay, SReSleep, Tries, LReSleep) -> {ok,U} = ll_udp_open(0), find_master(U, Retry, AL, ReqDelay, SReSleep, [], Tries, LReSleep). %% %% Master connect loop %% find_master(U, Retry, AddrL, ReqDelay, SReSleep, Ignore, Tries, LReSleep) -> case find_loop(U, Retry, AddrL, ReqDelay, SReSleep, Ignore, Tries, LReSleep) of [] -> find_master(U, Retry, AddrL, ReqDelay, SReSleep, Ignore, Tries, LReSleep); Servers -> ?dbg(servers, Servers), case connect_master(Servers) of {ok, Socket} -> ll_close(U), {ok, Socket}; _Error -> find_master(U, Retry, AddrL, ReqDelay, SReSleep, Servers ++ Ignore, Tries, LReSleep) end end. connect_master([{_Prio,IP,Port} | Servers]) -> case ll_tcp_connect(0, IP, Port) of {ok, S} -> {ok, S}; _Error -> connect_master(Servers) end; connect_master([]) -> {error, ebusy}. %% %% Always return a list of boot servers or hang. %% find_loop(U, Retry, AL, ReqDelay, SReSleep, Ignore, Tries, LReSleep) -> case find_loop(U, Retry, AL, ReqDelay, []) of [] -> % no response from any server erlang:display({erl_prim_loader,'no server found'}), % lifesign Tries1 = if Tries > 0 -> sleep(SReSleep), Tries - 1; true -> sleep(LReSleep), 0 end, find_loop(U, Retry, AL, ReqDelay, SReSleep, Ignore, Tries1, LReSleep); Servers -> keysort(1, Servers -- Ignore) end. %% broadcast or send find_loop(_U, 0, _AL, _Delay, Acc) -> Acc; find_loop(U, Retry, AL, Delay, Acc) -> send_all(U, AL, [?EBOOT_REQUEST, erlang:system_info(version)]), find_collect(U, Retry-1, AL, Delay, Acc). find_collect(U,Retry,AL,Delay,Acc) -> receive {udp, U, IP, _Port, [$E,$B,$O,$O,$T,$R,Priority,T1,T0 | _Version]} -> Elem = {Priority,IP,T1*256+T0}, ?dbg(got, Elem), case member(Elem, Acc) of false -> find_collect(U, Retry, AL, Delay, [Elem | Acc]); true -> find_collect(U, Retry, AL, Delay, Acc) end; _Garbage -> ?dbg(collect_garbage, _Garbage), find_collect(U, Retry, AL, Delay, Acc) after Delay -> ?dbg(collected, Acc), case keymember(0, 1, Acc) of %% got high priority server? true -> Acc; false -> find_loop(U, Retry, AL, Delay, Acc) end end. sleep(Time) -> receive after Time -> ok end. inet_exit_port(State, Port, _Reason) when State#state.data =:= Port -> State#state{data = noport, timeout = infinity}; inet_exit_port(State, _, _) -> State. inet_timeout_handler(State, _Parent) -> Tcp = State#state.data, if is_port(Tcp) -> ll_close(Tcp); true -> ok end, State#state{timeout = infinity, data = noport}. %% -> {{ok,BinFile,Tag},State} | {{error,Reason},State} inet_get_file_from_port(State, File, Paths) -> case is_basename(File) of false -> % get absolute file name. inet_send_and_rcv({get,File}, File, State); true when Paths =:= [] -> % get plain file name. inet_send_and_rcv({get,File}, File, State); true -> % use paths. inet_get_file_from_port1(File, Paths, State) end. inet_get_file_from_port1(File, [P | Paths], State) -> File1 = join(P, File), case inet_send_and_rcv({get,File1}, File1, State) of {{error,Reason},State1} -> case Paths of [] -> % return last error {{error,Reason},State1}; _ -> % try more paths inet_get_file_from_port1(File, Paths, State1) end; Result -> Result end; inet_get_file_from_port1(_File, [], State) -> {{error,file_not_found},State}. inet_send_and_rcv(Msg, Tag, State) when State#state.data =:= noport -> {ok,Tcp} = find_master(State#state.hosts), %% reconnect inet_send_and_rcv(Msg, Tag, State#state{data = Tcp, timeout = ?INET_IDLE_TIMEOUT}); inet_send_and_rcv(Msg, Tag, #state{data = Tcp, timeout = Timeout} = State) -> prim_inet:send(Tcp, term_to_binary(Msg)), receive {tcp,Tcp,BinMsg} -> case catch binary_to_term(BinMsg) of {get,{ok,BinFile}} -> {{ok,BinFile,Tag},State}; {_Cmd,Res={ok,_}} -> {Res,State}; {_Cmd,{error,Error}} -> {{error,Error},State}; {error,Error} -> {{error,Error},State}; {'EXIT',Error} -> {{error,Error},State} end; {tcp_closed,Tcp} -> %% Ok we must reconnect inet_send_and_rcv(Msg, Tag, State#state{data = noport}); {tcp_error,Tcp,_Reason} -> %% Ok we must reconnect inet_send_and_rcv(Msg, Tag, inet_stop_port(State)); {'EXIT', Tcp, _} -> %% Ok we must reconnect inet_send_and_rcv(Msg, Tag, State#state{data = noport}) after Timeout -> %% Ok we must reconnect inet_send_and_rcv(Msg, Tag, inet_stop_port(State)) end. %% -> {{ok,List},State} | {{error,Reason},State} inet_list_dir(State, Dir) -> inet_send_and_rcv({list_dir,Dir}, list_dir, State). %% -> {{ok,Info},State} | {{error,Reason},State} inet_read_file_info(State, File) -> inet_send_and_rcv({read_file_info,File}, read_file_info, State). %% -> {{ok,Info},State} | {{error,Reason},State} inet_read_link_info(State, File) -> inet_send_and_rcv({read_link_info,File}, read_link_info, State). %% -> {{ok,Cwd},State} | {{error,Reason},State} inet_get_cwd(State, []) -> inet_send_and_rcv(get_cwd, get_cwd, State); inet_get_cwd(State, [Drive]) -> inet_send_and_rcv({get_cwd,Drive}, get_cwd, State). inet_stop_port(#state{data=Tcp}=State) -> prim_inet:close(Tcp), State#state{data=noport}. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% %% Direct inet_drv access %% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% tcp_options() -> [{mode,binary}, {packet,4}, {active, true}, {deliver,term}]. tcp_timeout() -> 15000. %% options for udp [list, {broadcast, true}, {active,true}] udp_options() -> [{mode,list}, {active, true}, {deliver,term}, {broadcast,true}]. %% %% INET version IPv4 addresses %% ll_tcp_connect(LocalPort, IP, RemotePort) -> case ll_open_set_bind(tcp, ?INET_FAMILY, stream, tcp_options(), ?INET_ADDRESS, LocalPort) of {ok,S} -> case prim_inet:connect(S, IP, RemotePort, tcp_timeout()) of ok -> {ok, S}; Error -> port_error(S, Error) end; Error -> Error end. %% %% Open and initialize an udp port for broadcast %% ll_udp_open(P) -> ll_open_set_bind(udp, ?INET_FAMILY, dgram, udp_options(), ?INET_ADDRESS, P). ll_open_set_bind(Protocol, Family, Type, SOpts, IP, Port) -> case prim_inet:open(Protocol, Family, Type) of {ok, S} -> case prim_inet:setopts(S, SOpts) of ok -> case prim_inet:bind(S, IP, Port) of {ok,_} -> {ok, S}; Error -> port_error(S, Error) end; Error -> port_error(S, Error) end; Error -> Error end. ll_close(S) -> unlink(S), exit(S, kill). port_error(S, Error) -> unlink(S), prim_inet:close(S), Error. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -spec prim_init() -> prim_state(). prim_init() -> Deb = case init:get_argument(loader_debug) of {ok, _} -> true; error -> false end, cache_new(#prim_state{debug = Deb}). prim_purge_cache() -> do_prim_purge_cache(get()). do_prim_purge_cache([{Key,Val}|T]) -> case Val of {Cache,_FI} -> catch clear_cache(Key, Cache); _ -> ok end, do_prim_purge_cache(T); do_prim_purge_cache([]) -> ok. prim_set_primary_archive(PS, undefined, undefined, undefined, _ParserFun) -> debug(PS, {set_primary_archive, clean}), case PS#prim_state.primary_archive of undefined -> Res = {error, enoent}, debug(PS, {return, Res}), {Res, PS}; ArchiveFile -> {primary, PrimZip, _FI, _ParserFun2} = erase(ArchiveFile), ok = prim_zip:close(PrimZip), PS2 = PS#prim_state{primary_archive = undefined}, Res = {ok, []}, debug(PS2, {return, Res}), {Res, PS2} end; prim_set_primary_archive(PS, ArchiveFile0, ArchiveBin, #file_info{} = FileInfo, ParserFun) when is_list(ArchiveFile0), is_binary(ArchiveBin) -> %% Try the archive file debug(PS, {set_primary_archive, ArchiveFile0, byte_size(ArchiveBin)}), ArchiveFile = real_path(absname(ArchiveFile0)), {Res3, PS3} = case PS#prim_state.primary_archive of undefined -> case load_prim_archive(ArchiveFile, ArchiveBin, FileInfo) of {ok, PrimZip, FI, Ebins} -> debug(PS, {set_primary_archive, Ebins}), put(ArchiveFile, {primary, PrimZip, FI, ParserFun}), {{ok, Ebins}, PS#prim_state{primary_archive = ArchiveFile}}; Error -> debug(PS, {set_primary_archive, Error}), {Error, PS} end; OldArchiveFile -> debug(PS, {set_primary_archive, clean}), {primary, PrimZip, _FI, _ParserFun} = erase(OldArchiveFile), ok = prim_zip:close(PrimZip), PS2 = PS#prim_state{primary_archive = undefined}, prim_set_primary_archive(PS2, ArchiveFile, ArchiveBin, FileInfo, ParserFun) end, debug(PS3, {return, Res3}), {Res3, PS3}. -spec prim_get_file(prim_state(), file:filename()) -> {_, prim_state()}. prim_get_file(PS, File) -> debug(PS, {get_file, File}), {Res2, PS2} = case name_split(PS#prim_state.primary_archive, File) of {file, PrimFile} -> Res = prim_file:read_file(PrimFile), {Res, PS}; {archive, ArchiveFile, FileInArchive} -> debug(PS, {archive_get_file, ArchiveFile, FileInArchive}), FileComponents = path_split(FileInArchive), Fun = fun({Components, _GetInfo, GetBin}, Acc) -> if Components =:= FileComponents -> {false, {ok, GetBin()}}; true -> {true, Acc} end end, apply_archive(PS, Fun, {error, enoent}, ArchiveFile) end, debug(PS, {return, Res2}), {Res2, PS2}. -spec prim_list_dir(prim_state(), file:filename()) -> {{'ok', [file:filename()]}, prim_state()} | {{'error', term()}, prim_state()}. prim_list_dir(PS, Dir) -> debug(PS, {list_dir, Dir}), {Res2, PS3} = case name_split(PS#prim_state.primary_archive, Dir) of {file, PrimDir} -> Res = prim_file:list_dir(PrimDir), {Res, PS}; {archive, ArchiveFile, FileInArchive} -> debug(PS, {archive_list_dir, ArchiveFile, FileInArchive}), DirComponents = path_split(FileInArchive), Fun = fun({Components, _GetInfo, _GetBin}, {Status, Names} = Acc) -> case Components of [RevName | DC] when DC =:= DirComponents -> case RevName of "" -> %% The listed directory {true, {ok, Names}}; _ -> %% Plain file Name = reverse(RevName), {true, {Status, [Name | Names]}} end; ["", RevName | DC] when DC =:= DirComponents -> %% Directory Name = reverse(RevName), {true, {Status, [Name | Names]}}; [RevName] when DirComponents =:= [""] -> %% File in top directory Name = reverse(RevName), {true, {ok, [Name | Names]}}; ["", RevName] when DirComponents =:= [""] -> %% Directory in top directory Name = reverse(RevName), {true, {ok, [Name | Names]}}; _ -> %% No match {true, Acc} end end, {{Status, Names}, PS2} = apply_archive(PS, Fun, {error, []}, ArchiveFile), case Status of ok -> {{ok, Names}, PS2}; error -> {{error, enotdir}, PS2} end end, debug(PS, {return, Res2}), {Res2, PS3}. -spec prim_read_file_info(prim_state(), file:filename(), boolean()) -> {{'ok', #file_info{}}, prim_state()} | {{'error', term()}, prim_state()}. prim_read_file_info(PS, File, FollowLinks) -> debug(PS, {read_file_info, File}), {Res2, PS2} = case name_split(PS#prim_state.primary_archive, File) of {file, PrimFile} -> case FollowLinks of true -> {prim_file:read_file_info(PrimFile), PS}; false -> {prim_file:read_link_info(PrimFile), PS} end; {archive, ArchiveFile, []} -> %% Fake top directory debug(PS, {archive_read_file_info, ArchiveFile}), case prim_file:read_file_info(ArchiveFile) of {ok, FI} -> {{ok, FI#file_info{type = directory}}, PS}; Other -> {Other, PS} end; {archive, ArchiveFile, FileInArchive} -> debug(PS, {archive_read_file_info, File}), FileComponents = path_split(FileInArchive), Fun = fun({Components, GetInfo, _GetBin}, Acc) -> case Components of ["" | F] when F =:= FileComponents -> %% Directory {false, {ok, GetInfo()}}; F when F =:= FileComponents -> %% Plain file {false, {ok, GetInfo()}}; _ -> %% No match {true, Acc} end end, apply_archive(PS, Fun, {error, enoent}, ArchiveFile) end, debug(PS2, {return, Res2}), {Res2, PS2}. -spec prim_get_cwd(prim_state(), [file:filename()]) -> {{'error', term()} | {'ok', _}, prim_state()}. prim_get_cwd(PS, []) -> debug(PS, {get_cwd, []}), Res = prim_file:get_cwd(), debug(PS, {return, Res}), {Res, PS}; prim_get_cwd(PS, [Drive]) -> debug(PS, {get_cwd, Drive}), Res = prim_file:get_cwd(Drive), debug(PS, {return, Res}), {Res, PS}. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% apply_archive(PS, Fun, Acc, Archive) -> case get(Archive) of undefined -> case open_archive(Archive, Acc, Fun) of {ok, PrimZip, {Acc2, FI, _}} -> debug(PS, {cache, ok}), put(Archive, {{ok, PrimZip}, FI}), {Acc2, PS}; Error -> debug(PS, {cache, Error}), %% put(Archive, {Error, FI}), {Error, PS} end; {primary, PrimZip, FI, ParserFun} -> case prim_file:read_file_info(Archive) of {ok, FI2} when FI#file_info.mtime =:= FI2#file_info.mtime -> case foldl_archive(PrimZip, Acc, Fun) of {ok, _PrimZip2, Acc2} -> {Acc2, PS}; Error -> debug(PS, {primary, Error}), {Error, PS} end; {ok, FI2} -> ok = clear_cache(Archive, {ok, PrimZip}), case load_prim_archive(Archive, FI2, ParserFun) of {ok, PrimZip2, FI3, _Ebins} -> debug(PS, {cache, {update, Archive}}), put(Archive, {primary, PrimZip2, FI3, ParserFun}); Error2 -> debug(PS, {cache, {clear, Error2}}) end, apply_archive(PS, Fun, Acc, Archive); Error -> debug(PS, {cache, {clear, Error}}), ok = clear_cache(Archive, {ok, PrimZip}), apply_archive(PS, Fun, Acc, Archive) end; {Cache, FI} -> case prim_file:read_file_info(Archive) of {ok, FI2} when FI#file_info.mtime =:= FI2#file_info.mtime -> case Cache of {ok, PrimZip} -> case foldl_archive(PrimZip, Acc, Fun) of {ok, _PrimZip2, Acc2} -> {Acc2, PS}; Error -> debug(PS, {cache, {clear, Error}}), ok = clear_cache(Archive, Cache), debug(PS, {cache, Error}), erase(Archive), %% put(Archive, {Error, FI}), {Error, PS} end; Error -> debug(PS, {cache, Error}), {Error, PS} end; Error -> debug(PS, {cache, {clear, Error}}), ok = clear_cache(Archive, Cache), apply_archive(PS, Fun, Acc, Archive) end end. open_archive(Archive, Acc, Fun) -> case prim_file:read_file_info(Archive) of {ok, FileInfo} -> open_archive(Archive, FileInfo, Acc, Fun); {error, Reason} -> {error, Reason} end. %% Open the given archive and iterate through all files with an own %% wrapper fun in order to identify each file as a component list as %% returned from path_split/1. %% %% In the archive (zip) file, directory elements might or might not be %% present. To ensure consistency, a directory element is added if it %% does not already exist (ensure_virtual_dirs/6). NOTE that there will %% be no such directory element for the top directory of the archive. open_archive(Archive, FileInfo, Acc, Fun) -> FakeFI = FileInfo#file_info{type = directory}, Wrapper = fun({N, GI, GB}, {A, I, Dirs}) -> Components = path_split(N), Dirs2 = case Components of ["" | Dir] -> %% This is a directory [Dir | Dirs]; _ -> %% This is a regular file Dirs end, {Includes, Dirs3, A2} = ensure_virtual_dirs(Components, Fun, FakeFI, [{true, Components}], Dirs2, A), {_Continue, A3} = Fun({Components, GI, GB}, A2), {true, Includes, {A3, I, Dirs3}} end, prim_zip:open(Wrapper, {Acc, FakeFI, []}, Archive). ensure_virtual_dirs(Components, Fun, FakeFI, Includes, Dirs, Acc) -> case Components of [_] -> %% Don't add virtual dir for top directory {Includes, Dirs, Acc}; [_ | Dir] -> case lists:member(Dir, Dirs) of % BIF false -> %% The directory does not yet exist - add it GetInfo = fun() -> FakeFI end, GetBin = fun() -> <<>> end, VirtualDir = ["" | Dir], Includes2 = [{true, VirtualDir, GetInfo, GetBin} | Includes], Dirs2 = [Dir | Dirs], %% Recursively ensure dir elements on all levels {I, F, Acc2} = ensure_virtual_dirs(Dir, Fun, FakeFI, Includes2, Dirs2, Acc), {_Continue, Acc3} = Fun({VirtualDir, GetInfo, GetBin}, Acc2), {I, F, Acc3}; true -> %% The directory element does already exist %% Recursivly ensure dir elements on all levels ensure_virtual_dirs(Dir,Fun,FakeFI,Includes,Dirs,Acc) end end. foldl_archive(PrimZip, Acc, Fun) -> Wrapper = fun({Components, GI, GB}, A) -> %% Allow partial iteration at foldl {Continue, A2} = Fun({Components, GI, GB}, A), {Continue, true, A2} end, prim_zip:foldl(Wrapper, Acc, PrimZip). cache_new(PS) -> PS. clear_cache(Archive, Cache) -> erase(Archive), case Cache of {ok, PrimZip} -> prim_zip:close(PrimZip); {error, _} -> ok end. %%% -------------------------------------------------------- %%% Misc. functions. %%% -------------------------------------------------------- %%% Look for directory separators is_basename(File) -> case deep_member($/, File) of true -> false; false -> case erlang:system_info(os_type) of {win32, _} -> case File of [_,$: | _] -> false; _ -> not deep_member($\\, File) end; _ -> true end end. send_all(U, [IP | AL], Cmd) -> ?dbg(sendto, {U, IP, ?EBOOT_PORT, Cmd}), prim_inet:sendto(U, IP, ?EBOOT_PORT, Cmd), send_all(U, AL, Cmd); send_all(_U, [], _) -> ok. join(P, F) -> P ++ "/" ++ F. member(X, [X|_]) -> true; member(X, [_|Y]) -> member(X, Y); member(_X, []) -> false. deep_member(X, [X|_]) -> true; deep_member(X, [List | Y]) when is_list(List) -> deep_member(X, List) orelse deep_member(X, Y); deep_member(X, [Atom | Y]) when is_atom(Atom) -> deep_member(X, atom_to_list(Atom)) orelse deep_member(X, Y); deep_member(X, [_ | Y]) -> deep_member(X, Y); deep_member(_X, []) -> false. keymember(X, I, [Y | _]) when element(I,Y) =:= X -> true; keymember(X, I, [_ | T]) -> keymember(X, I, T); keymember(_X, _I, []) -> false. keysort(I, L) -> keysort(I, L, []). keysort(I, [X | L], Ls) -> keysort(I, L, keyins(X, I, Ls)); keysort(_I, [], Ls) -> Ls. keyins(X, I, [Y | T]) when X < element(I,Y) -> [X,Y|T]; keyins(X, I, [Y | T]) -> [Y | keyins(X, I, T)]; keyins(X, _I, []) -> [X]. to_strs([P|Paths]) when is_atom(P) -> [atom_to_list(P)|to_strs(Paths)]; to_strs([P|Paths]) when is_list(P) -> [P|to_strs(Paths)]; to_strs([_|Paths]) -> to_strs(Paths); to_strs([]) -> []. reverse([] = L) -> L; reverse([_] = L) -> L; reverse([A, B]) -> [B, A]; reverse([A, B | L]) -> lists:reverse(L, [B, A]). % BIF %% Returns a reversed list of path components, each component itself a %% reversed list (string), e.g. %% /path/to/file -> ["elif","ot","htap",""] %% /path/to/dir/ -> ["","rid","ot","htap",""] %% Note the "" marking leading and trailing / (slash). path_split(List) -> path_split(List, [], []). path_split([$/ | Tail], Path, Paths) -> path_split(Tail, [], [Path | Paths]); path_split([Head | Tail], Path, Paths) -> path_split(Tail, [Head | Path], Paths); path_split([], Path, Paths) -> [Path | Paths]. %% The opposite of path_split/1 path_join(Paths) -> path_join(Paths,[]). path_join([""],Acc) -> Acc; path_join([Path],Acc) -> reverse(Path) ++ Acc; path_join([Path|Paths],Acc) -> path_join(Paths,"/" ++ reverse(Path) ++ Acc). name_split(undefined, File) -> %% Ignore primary archive RevExt = reverse(init:archive_extension()), case archive_split(File, RevExt, []) of no_split -> {file, File}; Archive -> Archive end; name_split(ArchiveFile, File0) -> %% Look first in primary archive File = absname(File0), case string_match(real_path(File), ArchiveFile) of no_match -> %% Archive or plain file name_split(undefined, File); {match, FileInArchive} -> %% Primary archive {archive, ArchiveFile, FileInArchive} end. string_match([Char | File], [Char | Archive]) -> string_match(File, Archive); string_match([] = File, []) -> {match, File}; string_match([$/ | File], []) -> {match, File}; string_match(_File, _Archive) -> no_match. archive_split("/"++File, RevExt, Acc) -> case is_prefix(RevExt, Acc) of false -> archive_split(File, RevExt, [$/|Acc]); true -> ArchiveFile = absname(reverse(Acc)), {archive, ArchiveFile, File} end; archive_split([H|T], RevExt, Acc) -> archive_split(T, RevExt, [H|Acc]); archive_split([], RevExt, Acc) -> case is_prefix(RevExt, Acc) of false -> no_split; true -> ArchiveFile = absname(reverse(Acc)), {archive, ArchiveFile, []} end. is_prefix([H|T1], [H|T2]) -> is_prefix(T1, T2); is_prefix([_|_], _) -> false; is_prefix([], _ ) -> true. %% Parse list of ipv4 addresses ipv4_list([H | T]) -> case ipv4_address(H) of {ok,IP} -> [IP | ipv4_list(T)]; _ -> ipv4_list(T) end; ipv4_list([]) -> []. %% %% Parse Ipv4 address: d1.d2.d3.d4 (from inet_parse) %% %% Return {ok, IP} | {error, einval} %% ipv4_address(Cs) -> case catch ipv4_addr(Cs, []) of {'EXIT',_} -> {error,einval}; Addr -> {ok,Addr} end. ipv4_addr([C | Cs], IP) when C >= $0, C =< $9 -> ipv4_addr(Cs, C-$0, IP). ipv4_addr([$.|Cs], N, IP) when N < 256 -> ipv4_addr(Cs, [N|IP]); ipv4_addr([C|Cs], N, IP) when C >= $0, C =< $9 -> ipv4_addr(Cs, N*10 + (C-$0), IP); ipv4_addr([], D, [C,B,A]) when D < 256 -> {A,B,C,D}. %% A simplified version of filename:absname/1 absname(Name) -> Name2 = normalize(Name, []), case pathtype(Name2) of absolute -> Name2; relative -> case prim_file:get_cwd() of {ok, Cwd} -> Cwd ++ "/" ++ Name2; {error, _} -> Name2 end; volumerelative -> case prim_file:get_cwd() of {ok, Cwd} -> absname_vr(Name2, Cwd); {error, _} -> Name2 end end. %% Assumes normalized name absname_vr([$/ | NameRest], [Drive, $\: | _]) -> %% Absolute path on current drive. [Drive, $\: | NameRest]; absname_vr([Drive, $\: | NameRest], [Drive, $\: | _] = Cwd) -> %% Relative to current directory on current drive. Cwd ++ "/" ++ NameRest; absname_vr([Drive, $\: | NameRest], _) -> %% Relative to current directory on another drive. case prim_file:get_cwd([Drive, $\:]) of {ok, DriveCwd} -> DriveCwd ++ "/" ++ NameRest; {error, _} -> [Drive, $\:, $/] ++ NameRest end. %% Assumes normalized name pathtype(Name) when is_list(Name) -> case erlang:system_info(os_type) of {unix, _} -> unix_pathtype(Name); {win32, _} -> win32_pathtype(Name) end. unix_pathtype(Name) -> case Name of [$/|_] -> absolute; [List|Rest] when is_list(List) -> unix_pathtype(List++Rest); [Atom|Rest] when is_atom(Atom) -> atom_to_list(Atom)++Rest; _ -> relative end. win32_pathtype(Name) -> case Name of [List|Rest] when is_list(List) -> win32_pathtype(List++Rest); [Atom|Rest] when is_atom(Atom) -> win32_pathtype(atom_to_list(Atom)++Rest); [Char, List | Rest] when is_list(List) -> win32_pathtype([Char | List++Rest]); [$/, $/|_] -> absolute; [$/|_] -> volumerelative; [C1, C2, List | Rest] when is_list(List) -> win32_pathtype([C1, C2|List ++ Rest]); [_Letter, $:, $/|_] -> absolute; [_Letter, $:|_] -> volumerelative; _ -> relative end. normalize(Name, Acc) -> case Name of [List | Rest] when is_list(List) -> normalize(List ++ Rest, Acc); [Atom | Rest] when is_atom(Atom) -> normalize(atom_to_list(Atom) ++ Rest, Acc); [$\\ | Chars] -> case erlang:system_info(os_type) of {win32, _} -> normalize(Chars, [$/ | Acc]); _ -> normalize(Chars, [$\\ | Acc]) end; [Char | Chars] -> normalize(Chars, [Char | Acc]); [] -> reverse(Acc) end. %% Remove .. and . from the path, e.g. %% /path/./to/this/../file -> /path/to/file %% This includes resolving symlinks. %% %% This is done to ensure that paths are totally normalized before %% comparing to find out if a file is inside the primary archive or %% not. real_path(Name) -> real_path(Name,reverse(path_split(Name)),[],[]). real_path(_Name,[],Acc,_Links) -> path_join(Acc); real_path(Name,["."|Paths],Acc,Links) -> real_path(Name,Paths,Acc,Links); real_path(Name,[".."|Paths],[""]=Acc,Links) -> %% /.. -> / (can't get higher than root) real_path(Name,Paths,Acc,Links); real_path(Name,[".."|Paths],[Prev|Acc],Links) when Prev=/=".." -> real_path(Name,Paths,Acc,Links); real_path(Name,[Path|Paths],Acc,Links) -> This = [Path|Acc], ThisFile = path_join(This), case lists:member(ThisFile,Links) of true -> % circular!! Name; false -> case prim_file:read_link(ThisFile) of {ok,Link} -> case reverse(path_split(Link)) of [""|_] = LinkPaths -> real_path(Name,LinkPaths++Paths,[],[ThisFile|Links]); LinkPaths -> % windows currently does not allow creation of relative symlinks % across different drives case erlang:system_info(os_type) of {win32, _} -> real_path(Name,LinkPaths++Paths,[],[ThisFile|Links]); _ -> real_path(Name,LinkPaths++Paths,Acc,[ThisFile|Links]) end end; _ -> real_path(Name,Paths,This,Links) end end. load_prim_archive(ArchiveFile, ArchiveBin, #file_info{}=FileInfo) -> Fun = fun({Components, _GI, _GB}, A) -> case Components of ["", "nibe", RevApp] -> % Reverse ebin %% Collect ebin directories in archive Ebin = lists:reverse(RevApp, "/ebin"), {true, [Ebin | A]}; _ -> {true, A} end end, Ebins0 = [ArchiveFile], case open_archive({ArchiveFile, ArchiveBin}, FileInfo, Ebins0, Fun) of {ok, PrimZip, {RevEbins, FI, _}} -> Ebins = reverse(RevEbins), {ok, PrimZip, FI, Ebins}; Error -> Error end; load_prim_archive(ArchiveFile, FileInfo, ParserFun) -> case ParserFun(ArchiveFile) of {ok, ArchiveBin} -> load_prim_archive(ArchiveFile, ArchiveBin, FileInfo); Error -> Error end.