%% %% %CopyrightBegin% %% %% Copyright Ericsson AB 1996-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in %% compliance with the License. You should have received a copy of the %% Erlang Public License along with this software. If not, it can be %% retrieved online at http://www.erlang.org/. %% %% Software distributed under the License is distributed on an "AS IS" %% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See %% the License for the specific language governing rights and limitations %% under the License. %% %% %CopyrightEnd% %% %% A primary loader, provides two different methods to fetch a file: %% efile and inet. The efile method is simple communication with a %% port program. %% %% The distribution loading was removed and replaced with %% inet loading %% %% The start_it/4 function initializes a record with callback %% functions used to handle the interface functions. %% -module(erl_prim_loader). %% If the macro DEBUG is defined during compilation, %% debug printouts are done through erlang:display/1. %% Activate this feature by starting the compiler %% with> erlc -DDEBUG ... %% or by> setenv ERL_COMPILER_FLAGS DEBUG %% before running make (in the OTP make system) %% (the example is for tcsh) -include("inet_boot.hrl"). %% Public -export([start/3, set_path/1, get_path/0, get_file/1, get_files/2, list_dir/1, read_file_info/1, get_cwd/0, get_cwd/1]). %% Used by erl_boot_server -export([prim_init/0, prim_get_file/2, prim_list_dir/2, prim_read_file_info/2, prim_get_cwd/2]). %% Used by escript and code -export([set_primary_archive/3, release_archives/0]). -include_lib("kernel/include/file.hrl"). -type host() :: atom(). -record(prim_state, {debug :: boolean(), cache, primary_archive}). -type prim_state() :: #prim_state{}. -record(state, {loader :: 'efile' | 'inet', hosts = [] :: [host()], % hosts list (to boot from) id, % not used any more? data :: 'noport' | port(), % data port etc timeout :: timeout(), % idle timeout %% Number of timeouts before archives are released n_timeouts :: non_neg_integer(), multi_get = false :: boolean(), prim_state :: prim_state()}). % state for efile code loader -define(IDLE_TIMEOUT, 60000). %% tear inet connection after 1 minutes -define(N_TIMEOUTS, 6). %% release efile archive after 6 minutes %% Defines for inet as prim_loader -define(INET_FAMILY, inet). -define(INET_ADDRESS, {0,0,0,0}). -ifdef(DEBUG). -define(dbg(Tag, Data), erlang:display({Tag,Data})). -else. -define(dbg(Tag, Data), true). -endif. -define(SAFE2(Expr, State), fun() -> case catch Expr of {'EXIT',XXXReason} -> {{error,XXXReason}, State}; XXXRes -> XXXRes end end()). debug(#prim_state{debug = Deb}, Term) -> case Deb of false -> ok; true -> erlang:display(Term) end. %%% -------------------------------------------------------- %%% Interface Functions. %%% -------------------------------------------------------- -spec start(Id, Loader, Hosts) -> {'ok', Pid} | {'error', What} when Id :: term(), Loader :: atom() | string(), Hosts :: Host | [Host], Host :: host(), Pid :: pid(), What :: term(). start(Id, Pgm, Hosts) when is_atom(Hosts) -> start(Id, Pgm, [Hosts]); start(Id, Pgm0, Hosts) -> Pgm = if is_atom(Pgm0) -> atom_to_list(Pgm0); true -> Pgm0 end, Self = self(), Pid = spawn_link(fun() -> start_it(Pgm, Id, Self, Hosts) end), register(erl_prim_loader, Pid), receive {Pid,ok} -> {ok,Pid}; {'EXIT',Pid,Reason} -> {error,Reason} end. %% Hosts must be a list of form ['1.2.3.4' ...] start_it("inet", Id, Pid, Hosts) -> process_flag(trap_exit, true), ?dbg(inet, {Id,Pid,Hosts}), AL = ipv4_list(Hosts), ?dbg(addresses, AL), {ok,Tcp} = find_master(AL), init_ack(Pid), PS = prim_init(), State = #state {loader = inet, hosts = AL, id = Id, data = Tcp, timeout = ?IDLE_TIMEOUT, n_timeouts = ?N_TIMEOUTS, prim_state = PS}, loop(State, Pid, []); start_it("efile", Id, Pid, _Hosts) -> process_flag(trap_exit, true), {ok, Port} = prim_file:open([binary]), init_ack(Pid), MultiGet = case erlang:system_info(thread_pool_size) of 0 -> false; _ -> true end, PS = prim_init(), State = #state {loader = efile, id = Id, data = Port, timeout = infinity, multi_get = MultiGet, prim_state = PS}, loop(State, Pid, []). init_ack(Pid) -> Pid ! {self(),ok}, ok. -spec set_path(Path) -> 'ok' when Path :: [Dir :: string()]. set_path(Paths) when is_list(Paths) -> request({set_path,Paths}). -spec get_path() -> {'ok', Path} when Path :: [Dir :: string()]. get_path() -> request({get_path,[]}). -spec get_file(Filename) -> {'ok', Bin, FullName} | 'error' when Filename :: atom() | string(), Bin :: binary(), FullName :: string(). get_file(File) when is_atom(File) -> get_file(atom_to_list(File)); get_file(File) -> check_file_result(get_file, File, request({get_file,File})). -spec get_files([{atom(), string()}], fun((atom(),binary(),string()) -> 'ok' | {'error', atom()})) -> 'ok' | {'error', atom()}. get_files(ModFiles, Fun) -> case request({get_files,{ModFiles,Fun}}) of E = {error,_M} -> E; {error,Reason,M} -> check_file_result(get_files, M, {error,Reason}), {error,M}; ok -> ok end. -spec list_dir(Dir) -> {'ok', Filenames} | 'error' when Dir :: string(), Filenames :: [Filename :: string()]. list_dir(Dir) -> check_file_result(list_dir, Dir, request({list_dir,Dir})). -spec read_file_info(Filename) -> {'ok', FileInfo} | 'error' when Filename :: string(), FileInfo :: file:file_info(). read_file_info(File) -> check_file_result(read_file_info, File, request({read_file_info,File})). -spec get_cwd() -> {'ok', string()} | 'error'. get_cwd() -> check_file_result(get_cwd, [], request({get_cwd,[]})). -spec get_cwd(string()) -> {'ok', string()} | 'error'. get_cwd(Drive) -> check_file_result(get_cwd, Drive, request({get_cwd,[Drive]})). -spec set_primary_archive(File :: string() | 'undefined', ArchiveBin :: binary() | 'undefined', FileInfo :: #file_info{} | 'undefined') -> {ok, [string()]} | {error,_}. set_primary_archive(undefined, undefined, undefined) -> request({set_primary_archive, undefined, undefined, undefined}); set_primary_archive(File, ArchiveBin, FileInfo) when is_list(File), is_binary(ArchiveBin), is_record(FileInfo, file_info) -> request({set_primary_archive, File, ArchiveBin, FileInfo}). -spec release_archives() -> 'ok' | {'error', _}. release_archives() -> request(release_archives). request(Req) -> Loader = whereis(erl_prim_loader), Loader ! {self(),Req}, receive {Loader,Res} -> Res; {'EXIT',Loader,_What} -> error end. check_file_result(_, _, {error,enoent}) -> error; check_file_result(_, _, {error,enotdir}) -> error; check_file_result(Func, Target, {error,Reason}) -> case (catch atom_to_list(Reason)) of {'EXIT',_} -> % exit trapped error; Errno -> % errno Process = case process_info(self(), registered_name) of {registered_name,R} -> "Process: " ++ atom_to_list(R) ++ "."; _ -> "" end, TargetStr = if is_atom(Target) -> atom_to_list(Target); is_list(Target) -> Target; true -> [] end, Report = case TargetStr of [] -> "File operation error: " ++ Errno ++ ". " ++ "Function: " ++ atom_to_list(Func) ++ ". " ++ Process; _ -> "File operation error: " ++ Errno ++ ". " ++ "Target: " ++ TargetStr ++ ". " ++ "Function: " ++ atom_to_list(Func) ++ ". " ++ Process end, %% this is equal to calling error_logger:error_report/1 which %% we don't want to do from code_server during system boot error_logger ! {notify,{error_report,group_leader(), {self(),std_error,Report}}}, error end; check_file_result(_, _, Other) -> Other. %%% -------------------------------------------------------- %%% The main loop. %%% -------------------------------------------------------- loop(State, Parent, Paths) -> receive {Pid,Req} when is_pid(Pid) -> %% erlang:display(Req), {Resp,State2,Paths2} = case Req of {set_path,NewPaths} -> {ok,State,to_strs(NewPaths)}; {get_path,_} -> {{ok,Paths},State,Paths}; {get_file,File} -> {Res,State1} = handle_get_file(State, Paths, File), {Res,State1,Paths}; {get_files,{ModFiles,Fun}} -> {Res,State1} = handle_get_files(State, ModFiles, Paths, Fun), {Res,State1,Paths}; {list_dir,Dir} -> {Res,State1} = handle_list_dir(State, Dir), {Res,State1,Paths}; {read_file_info,File} -> {Res,State1} = handle_read_file_info(State, File), {Res,State1,Paths}; {get_cwd,[]} -> {Res,State1} = handle_get_cwd(State, []), {Res,State1,Paths}; {get_cwd,[_]=Args} -> {Res,State1} = handle_get_cwd(State, Args), {Res,State1,Paths}; {set_primary_archive,File,Bin,FileInfo} -> {Res,State1} = handle_set_primary_archive(State, File, Bin, FileInfo), {Res,State1,Paths}; release_archives -> {Res,State1} = handle_release_archives(State), {Res,State1,Paths}; _Other -> {ignore,State,Paths} end, if Resp =:= ignore -> ok; true -> Pid ! {self(),Resp}, ok end, if is_record(State2, state) -> loop(State2, Parent, Paths2); true -> exit({bad_state, Req, State2}) end; {'EXIT',Parent,W} -> _State1 = handle_stop(State), exit(W); {'EXIT',P,W} -> State1 = handle_exit(State, P, W), loop(State1, Parent, Paths); _Message -> loop(State, Parent, Paths) after State#state.timeout -> State1 = handle_timeout(State, Parent), loop(State1, Parent, Paths) end. handle_get_files(State = #state{multi_get = true}, ModFiles, Paths, Fun) -> ?SAFE2(efile_multi_get_file_from_port(State, ModFiles, Paths, Fun), State); handle_get_files(State, _ModFiles, _Paths, _Fun) -> % no multi get {{error,no_multi_get},State}. handle_get_file(State = #state{loader = efile}, Paths, File) -> ?SAFE2(efile_get_file_from_port(State, File, Paths), State); handle_get_file(State = #state{loader = inet}, Paths, File) -> ?SAFE2(inet_get_file_from_port(State, File, Paths), State). handle_set_primary_archive(State= #state{loader = efile}, File, Bin, FileInfo) -> ?SAFE2(efile_set_primary_archive(State, File, Bin, FileInfo), State). handle_release_archives(State= #state{loader = efile}) -> ?SAFE2(efile_release_archives(State), State). handle_list_dir(State = #state{loader = efile}, Dir) -> ?SAFE2(efile_list_dir(State, Dir), State); handle_list_dir(State = #state{loader = inet}, Dir) -> ?SAFE2(inet_list_dir(State, Dir), State). handle_read_file_info(State = #state{loader = efile}, File) -> ?SAFE2(efile_read_file_info(State, File), State); handle_read_file_info(State = #state{loader = inet}, File) -> ?SAFE2(inet_read_file_info(State, File), State). handle_get_cwd(State = #state{loader = efile}, Drive) -> ?SAFE2(efile_get_cwd(State, Drive), State); handle_get_cwd(State = #state{loader = inet}, Drive) -> ?SAFE2(inet_get_cwd(State, Drive), State). handle_stop(State = #state{loader = efile}) -> efile_stop_port(State); handle_stop(State = #state{loader = inet}) -> inet_stop_port(State). handle_exit(State = #state{loader = efile}, Who, Reason) -> efile_exit_port(State, Who, Reason); handle_exit(State = #state{loader = inet}, Who, Reason) -> inet_exit_port(State, Who, Reason). handle_timeout(State = #state{loader = efile}, Parent) -> efile_timeout_handler(State, Parent); handle_timeout(State = #state{loader = inet}, Parent) -> inet_timeout_handler(State, Parent). %%% -------------------------------------------------------- %%% Functions which handle efile as prim_loader (default). %%% -------------------------------------------------------- %%% Reading many files in parallel is an optimization. %%% See also comment in init.erl. %% -> {ok,State} | {{error,Module},State} | {{error,Reason,Module},State} efile_multi_get_file_from_port(State, ModFiles, Paths, Fun) -> Ref = make_ref(), %% More than 200 processes is no gain. Max = erlang:min(200, erlang:system_info(thread_pool_size)), efile_multi_get_file_from_port2(ModFiles, 0, Max, State, Paths, Fun, Ref, ok). efile_multi_get_file_from_port2([MF | MFs], Out, Max, State, Paths, Fun, Ref, Ret) when Out < Max -> Self = self(), _Pid = spawn(fun() -> efile_par_get_file(Ref, State, MF, Paths, Self, Fun) end), efile_multi_get_file_from_port2(MFs, Out+1, Max, State, Paths, Fun, Ref, Ret); efile_multi_get_file_from_port2(MFs, Out, Max, _State, Paths, Fun, Ref, Ret) when Out > 0 -> receive {Ref, ok, State1} -> efile_multi_get_file_from_port2(MFs, Out-1, Max, State1, Paths, Fun, Ref, Ret); {Ref, {error,_Mod} = Error, State1} -> efile_multi_get_file_from_port2(MFs, Out-1, Max, State1, Paths, Fun, Ref, Error); {Ref, MF, {error,emfile,State1}} -> %% Max can take negative values. Out cannot. efile_multi_get_file_from_port2([MF | MFs], Out-1, Max-1, State1, Paths, Fun, Ref, Ret); {Ref, {M,_F}, {error,Error,State1}} -> efile_multi_get_file_from_port2(MFs, Out-1, 0, State1, Paths, Fun, Ref, {error,Error,M}) end; efile_multi_get_file_from_port2(_MFs, 0, _Max, State, _Paths, _Fun, _Ref, Ret) -> {Ret,State}. efile_par_get_file(Ref, State, {Mod,File} = MF, Paths, Pid, Fun) -> %% One port for each file read in "parallel": case prim_file:open([binary]) of {ok, Port} -> Port0 = State#state.data, State1 = State#state{data = Port}, R = case efile_get_file_from_port(State1, File, Paths) of {{error,Reason},State2} -> {Ref,MF,{error,Reason,State2}}; {{ok,BinFile,Full},State2} -> %% Fun(...) -> ok | {error,Mod} {Ref,Fun(Mod, BinFile, Full),State2#state{data=Port0}} end, prim_file:close(Port), Pid ! R; {error, Error} -> Pid ! {Ref,MF,{error,Error,State}} end. %% -> {{ok,BinFile,File},State} | {{error,Reason},State} efile_get_file_from_port(State, File, Paths) -> case is_basename(File) of false -> % get absolute file name. efile_get_file_from_port2(State, File); true when Paths =:= [] -> % get plain file name. efile_get_file_from_port2(State, File); true -> % use paths. efile_get_file_from_port3(State, File, Paths) end. efile_get_file_from_port2(#state{prim_state = PS} = State, File) -> {Res, PS2} = prim_get_file(PS, File), case Res of {error,port_died} -> exit('prim_load port died'); {error,Reason} -> {{error,Reason},State#state{prim_state = PS2}}; {ok,BinFile} -> {{ok,BinFile,File},State#state{prim_state = PS2}} end. efile_get_file_from_port3(State, File, [P | Paths]) -> case efile_get_file_from_port2(State, join(P, File)) of {{error,Reason},State1} when Reason =/= emfile -> case Paths of [] -> % return last error {{error,Reason},State1}; _ -> % try more paths efile_get_file_from_port3(State1, File, Paths) end; Result -> Result end; efile_get_file_from_port3(State, _File, []) -> {{error,enoent},State}. efile_set_primary_archive(#state{prim_state = PS} = State, File, Bin, FileInfo) -> {Res, PS2} = prim_set_primary_archive(PS, File, Bin, FileInfo), {Res,State#state{prim_state = PS2}}. efile_release_archives(#state{prim_state = PS} = State) -> {Res, PS2} = prim_release_archives(PS), {Res,State#state{prim_state = PS2}}. efile_list_dir(#state{prim_state = PS} = State, Dir) -> {Res, PS2} = prim_list_dir(PS, Dir), {Res, State#state{prim_state = PS2}}. efile_read_file_info(#state{prim_state = PS} = State, File) -> {Res, PS2} = prim_read_file_info(PS, File), {Res, State#state{prim_state = PS2}}. efile_get_cwd(#state{prim_state = PS} = State, Drive) -> {Res, PS2} = prim_get_cwd(PS, Drive), {Res, State#state{prim_state = PS2}}. efile_stop_port(#state{data=Port}=State) -> prim_file:close(Port), State#state{data=noport}. efile_exit_port(State, Port, Reason) when State#state.data =:= Port -> exit({port_died,Reason}); efile_exit_port(State, _Port, _Reason) -> State. efile_timeout_handler(#state{n_timeouts = N} = State, _Parent) -> if N =< 0 -> {_Res, State2} = efile_release_archives(State), State2#state{n_timeouts = ?N_TIMEOUTS}; true -> State#state{n_timeouts = N - 1} end. %%% -------------------------------------------------------- %%% Functions which handle inet prim_loader %%% -------------------------------------------------------- %% %% Connect to a boot master %% return {ok, Socket} TCP %% AL is a list of boot servers (including broadcast addresses) %% find_master(AL) -> find_master(AL, ?EBOOT_RETRY, ?EBOOT_REQUEST_DELAY, ?EBOOT_SHORT_RETRY_SLEEP, ?EBOOT_UNSUCCESSFUL_TRIES, ?EBOOT_LONG_RETRY_SLEEP). find_master(AL, Retry, ReqDelay, SReSleep, Tries, LReSleep) -> {ok,U} = ll_udp_open(0), find_master(U, Retry, AL, ReqDelay, SReSleep, [], Tries, LReSleep). %% %% Master connect loop %% find_master(U, Retry, AddrL, ReqDelay, SReSleep, Ignore, Tries, LReSleep) -> case find_loop(U, Retry, AddrL, ReqDelay, SReSleep, Ignore, Tries, LReSleep) of [] -> find_master(U, Retry, AddrL, ReqDelay, SReSleep, Ignore, Tries, LReSleep); Servers -> ?dbg(servers, Servers), case connect_master(Servers) of {ok, Socket} -> ll_close(U), {ok, Socket}; _Error -> find_master(U, Retry, AddrL, ReqDelay, SReSleep, Servers ++ Ignore, Tries, LReSleep) end end. connect_master([{_Prio,IP,Port} | Servers]) -> case ll_tcp_connect(0, IP, Port) of {ok, S} -> {ok, S}; _Error -> connect_master(Servers) end; connect_master([]) -> {error, ebusy}. %% %% Always return a list of boot servers or hang. %% find_loop(U, Retry, AL, ReqDelay, SReSleep, Ignore, Tries, LReSleep) -> case find_loop(U, Retry, AL, ReqDelay, []) of [] -> % no response from any server erlang:display({erl_prim_loader,'no server found'}), % lifesign Tries1 = if Tries > 0 -> sleep(SReSleep), Tries - 1; true -> sleep(LReSleep), 0 end, find_loop(U, Retry, AL, ReqDelay, SReSleep, Ignore, Tries1, LReSleep); Servers -> keysort(1, Servers -- Ignore) end. %% broadcast or send find_loop(_U, 0, _AL, _Delay, Acc) -> Acc; find_loop(U, Retry, AL, Delay, Acc) -> send_all(U, AL, [?EBOOT_REQUEST, erlang:system_info(version)]), find_collect(U, Retry-1, AL, Delay, Acc). find_collect(U,Retry,AL,Delay,Acc) -> receive {udp, U, IP, _Port, [$E,$B,$O,$O,$T,$R,Priority,T1,T0 | _Version]} -> Elem = {Priority,IP,T1*256+T0}, ?dbg(got, Elem), case member(Elem, Acc) of false -> find_collect(U, Retry, AL, Delay, [Elem | Acc]); true -> find_collect(U, Retry, AL, Delay, Acc) end; _Garbage -> ?dbg(collect_garbage, _Garbage), find_collect(U, Retry, AL, Delay, Acc) after Delay -> ?dbg(collected, Acc), case keymember(0, 1, Acc) of %% got high priority server? true -> Acc; false -> find_loop(U, Retry, AL, Delay, Acc) end end. sleep(Time) -> receive after Time -> ok end. inet_exit_port(State, Port, _Reason) when State#state.data =:= Port -> State#state{data = noport, timeout = infinity}; inet_exit_port(State, _, _) -> State. inet_timeout_handler(State, _Parent) -> Tcp = State#state.data, if is_port(Tcp) -> ll_close(Tcp); true -> ok end, State#state{timeout = infinity, data = noport}. %% -> {{ok,BinFile,Tag},State} | {{error,Reason},State} inet_get_file_from_port(State, File, Paths) -> case is_basename(File) of false -> % get absolute file name. inet_send_and_rcv({get,File}, File, State); true when Paths =:= [] -> % get plain file name. inet_send_and_rcv({get,File}, File, State); true -> % use paths. inet_get_file_from_port1(File, Paths, State) end. inet_get_file_from_port1(File, [P | Paths], State) -> File1 = join(P, File), case inet_send_and_rcv({get,File1}, File1, State) of {{error,Reason},State1} -> case Paths of [] -> % return last error {{error,Reason},State1}; _ -> % try more paths inet_get_file_from_port1(File, Paths, State1) end; Result -> Result end; inet_get_file_from_port1(_File, [], State) -> {{error,file_not_found},State}. inet_send_and_rcv(Msg, Tag, State) when State#state.data =:= noport -> {ok,Tcp} = find_master(State#state.hosts), %% reconnect inet_send_and_rcv(Msg, Tag, State#state{data = Tcp, timeout = ?IDLE_TIMEOUT}); inet_send_and_rcv(Msg, Tag, #state{data = Tcp, timeout = Timeout} = State) -> prim_inet:send(Tcp, term_to_binary(Msg)), receive {tcp,Tcp,BinMsg} -> case catch binary_to_term(BinMsg) of {get,{ok,BinFile}} -> {{ok,BinFile,Tag},State}; {_Cmd,Res={ok,_}} -> {Res,State}; {_Cmd,{error,Error}} -> {{error,Error},State}; {error,Error} -> {{error,Error},State}; {'EXIT',Error} -> {{error,Error},State} end; {tcp_closed,Tcp} -> %% Ok we must reconnect inet_send_and_rcv(Msg, Tag, State#state{data = noport}); {tcp_error,Tcp,_Reason} -> %% Ok we must reconnect inet_send_and_rcv(Msg, Tag, inet_stop_port(State)); {'EXIT', Tcp, _} -> %% Ok we must reconnect inet_send_and_rcv(Msg, Tag, State#state{data = noport}) after Timeout -> %% Ok we must reconnect inet_send_and_rcv(Msg, Tag, inet_stop_port(State)) end. %% -> {{ok,List},State} | {{error,Reason},State} inet_list_dir(State, Dir) -> inet_send_and_rcv({list_dir,Dir}, list_dir, State). %% -> {{ok,Info},State} | {{error,Reason},State} inet_read_file_info(State, File) -> inet_send_and_rcv({read_file_info,File}, read_file_info, State). %% -> {{ok,Cwd},State} | {{error,Reason},State} inet_get_cwd(State, []) -> inet_send_and_rcv(get_cwd, get_cwd, State); inet_get_cwd(State, [Drive]) -> inet_send_and_rcv({get_cwd,Drive}, get_cwd, State). inet_stop_port(#state{data=Tcp}=State) -> prim_inet:close(Tcp), State#state{data=noport}. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% %% Direct inet_drv access %% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% tcp_options() -> [{mode,binary}, {packet,4}, {active, true}, {deliver,term}]. tcp_timeout() -> 15000. %% options for udp [list, {broadcast, true}, {active,true}] udp_options() -> [{mode,list}, {active, true}, {deliver,term}, {broadcast,true}]. %% %% INET version IPv4 addresses %% ll_tcp_connect(LocalPort, IP, RemotePort) -> case ll_open_set_bind(tcp, ?INET_FAMILY, stream, tcp_options(), ?INET_ADDRESS, LocalPort) of {ok,S} -> case prim_inet:connect(S, IP, RemotePort, tcp_timeout()) of ok -> {ok, S}; Error -> port_error(S, Error) end; Error -> Error end. %% %% Open and initialize an udp port for broadcast %% ll_udp_open(P) -> ll_open_set_bind(udp, ?INET_FAMILY, dgram, udp_options(), ?INET_ADDRESS, P). ll_open_set_bind(Protocol, Family, Type, SOpts, IP, Port) -> case prim_inet:open(Protocol, Family, Type) of {ok, S} -> case prim_inet:setopts(S, SOpts) of ok -> case prim_inet:bind(S, IP, Port) of {ok,_} -> {ok, S}; Error -> port_error(S, Error) end; Error -> port_error(S, Error) end; Error -> Error end. ll_close(S) -> unlink(S), exit(S, kill). port_error(S, Error) -> unlink(S), prim_inet:close(S), Error. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -spec prim_init() -> prim_state(). prim_init() -> Deb = case init:get_argument(loader_debug) of {ok, _} -> true; error -> false end, cache_new(#prim_state{debug = Deb}). prim_release_archives(PS) -> debug(PS, release_archives), {Res, PS2} = prim_do_release_archives(PS, get(), []), debug(PS2, {return, Res}), {Res, PS2}. prim_do_release_archives(PS, [{ArchiveFile, DictVal} | KeyVals], Acc) -> Res = case DictVal of {primary, _PrimZip, _FI} -> ok; % Keep primary archive {Cache, _FI} -> debug(PS, {release, cache, ArchiveFile}), erase(ArchiveFile), clear_cache(ArchiveFile, Cache) end, case Res of ok -> prim_do_release_archives(PS, KeyVals, Acc); {error, Reason} -> prim_do_release_archives(PS, KeyVals, [{ArchiveFile, Reason} | Acc]) end; prim_do_release_archives(PS, [], []) -> {ok, PS#prim_state{primary_archive = undefined}}; prim_do_release_archives(PS, [], Errors) -> {{error, Errors}, PS#prim_state{primary_archive = undefined}}. prim_set_primary_archive(PS, undefined, undefined, undefined) -> debug(PS, {set_primary_archive, clean}), case PS#prim_state.primary_archive of undefined -> Res = {error, enoent}, debug(PS, {return, Res}), {Res, PS}; ArchiveFile -> {primary, PrimZip, _FI} = erase(ArchiveFile), ok = prim_zip:close(PrimZip), PS2 = PS#prim_state{primary_archive = undefined}, Res = {ok, []}, debug(PS2, {return, Res}), {Res, PS2} end; prim_set_primary_archive(PS, ArchiveFile0, ArchiveBin, #file_info{} = FileInfo) when is_list(ArchiveFile0), is_binary(ArchiveBin) -> %% Try the archive file debug(PS, {set_primary_archive, ArchiveFile0, byte_size(ArchiveBin)}), ArchiveFile = absname(ArchiveFile0), {Res3, PS3} = case PS#prim_state.primary_archive of undefined -> Fun = fun({Components, _GI, _GB}, A) -> case Components of ["", "nibe", RevApp] -> % Reverse ebin %% Collect ebin directories in archive Ebin = reverse(RevApp) ++ "/ebin", {true, [Ebin | A]}; _ -> {true, A} end end, Ebins0 = [ArchiveFile], case open_archive({ArchiveFile, ArchiveBin}, FileInfo, Ebins0, Fun) of {ok, PrimZip, {RevEbins, FI, _}} -> Ebins = reverse(RevEbins), debug(PS, {set_primary_archive, Ebins}), put(ArchiveFile, {primary, PrimZip, FI}), {{ok, Ebins}, PS#prim_state{primary_archive = ArchiveFile}}; Error -> debug(PS, {set_primary_archive, Error}), {Error, PS} end; OldArchiveFile -> debug(PS, {set_primary_archive, clean}), {primary, PrimZip, _FI} = erase(OldArchiveFile), ok = prim_zip:close(PrimZip), PS2 = PS#prim_state{primary_archive = undefined}, prim_set_primary_archive(PS2, ArchiveFile, ArchiveBin, FileInfo) end, debug(PS3, {return, Res3}), {Res3, PS3}. -spec prim_get_file(prim_state(), file:filename()) -> {_, prim_state()}. prim_get_file(PS, File) -> debug(PS, {get_file, File}), {Res2, PS2} = case name_split(PS#prim_state.primary_archive, File) of {file, PrimFile} -> Res = prim_file:read_file(PrimFile), {Res, PS}; {archive, ArchiveFile, FileInArchive} -> debug(PS, {archive_get_file, ArchiveFile, FileInArchive}), FileComponents = path_split(FileInArchive), Fun = fun({Components, _GetInfo, GetBin}, Acc) -> if Components =:= FileComponents -> {false, {ok, GetBin()}}; true -> {true, Acc} end end, apply_archive(PS, Fun, {error, enoent}, ArchiveFile) end, debug(PS, {return, Res2}), {Res2, PS2}. -spec prim_list_dir(prim_state(), file:filename()) -> {{'ok', [file:filename()]}, prim_state()} | {{'error', term()}, prim_state()}. prim_list_dir(PS, Dir) -> debug(PS, {list_dir, Dir}), {Res2, PS3} = case name_split(PS#prim_state.primary_archive, Dir) of {file, PrimDir} -> Res = prim_file:list_dir(PrimDir), {Res, PS}; {archive, ArchiveFile, FileInArchive} -> debug(PS, {archive_list_dir, ArchiveFile, FileInArchive}), DirComponents = path_split(FileInArchive), Fun = fun({Components, _GetInfo, _GetBin}, {Status, Names} = Acc) -> case Components of [RevName | DC] when DC =:= DirComponents -> case RevName of "" -> %% The listed directory {true, {ok, Names}}; _ -> %% Plain file Name = reverse(RevName), {true, {Status, [Name | Names]}} end; ["", RevName | DC] when DC =:= DirComponents -> %% Directory Name = reverse(RevName), {true, {Status, [Name | Names]}}; [RevName] when DirComponents =:= [""] -> %% File in top directory Name = reverse(RevName), {true, {ok, [Name | Names]}}; ["", RevName] when DirComponents =:= [""] -> %% Directory in top directory Name = reverse(RevName), {true, {ok, [Name | Names]}}; _ -> %% No match {true, Acc} end end, {{Status, Names}, PS2} = apply_archive(PS, Fun, {error, []}, ArchiveFile), case Status of ok -> {{ok, Names}, PS2}; error -> {{error, enotdir}, PS2} end end, debug(PS, {return, Res2}), {Res2, PS3}. -spec prim_read_file_info(prim_state(), file:filename()) -> {{'ok', #file_info{}}, prim_state()} | {{'error', term()}, prim_state()}. prim_read_file_info(PS, File) -> debug(PS, {read_file_info, File}), {Res2, PS2} = case name_split(PS#prim_state.primary_archive, File) of {file, PrimFile} -> Res = prim_file:read_file_info(PrimFile), {Res, PS}; {archive, ArchiveFile, []} -> %% Fake top directory debug(PS, {archive_read_file_info, ArchiveFile}), case prim_file:read_file_info(ArchiveFile) of {ok, FI} -> {{ok, FI#file_info{type = directory}}, PS}; Other -> {Other, PS} end; {archive, ArchiveFile, FileInArchive} -> debug(PS, {archive_read_file_info, File}), FileComponents = path_split(FileInArchive), Fun = fun({Components, GetInfo, _GetBin}, Acc) -> case Components of ["" | F] when F =:= FileComponents -> %% Directory {false, {ok, GetInfo()}}; F when F =:= FileComponents -> %% Plain file {false, {ok, GetInfo()}}; _ -> %% No match {true, Acc} end end, apply_archive(PS, Fun, {error, enoent}, ArchiveFile) end, debug(PS2, {return, Res2}), {Res2, PS2}. -spec prim_get_cwd(prim_state(), [file:filename()]) -> {{'error', term()} | {'ok', _}, prim_state()}. prim_get_cwd(PS, []) -> debug(PS, {get_cwd, []}), Res = prim_file:get_cwd(), debug(PS, {return, Res}), {Res, PS}; prim_get_cwd(PS, [Drive]) -> debug(PS, {get_cwd, Drive}), Res = prim_file:get_cwd(Drive), debug(PS, {return, Res}), {Res, PS}. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% apply_archive(PS, Fun, Acc, Archive) -> case get(Archive) of undefined -> case open_archive(Archive, Acc, Fun) of {ok, PrimZip, {Acc2, FI, _}} -> debug(PS, {cache, ok}), put(Archive, {{ok, PrimZip}, FI}), {Acc2, PS}; Error -> debug(PS, {cache, Error}), %% put(Archive, {Error, FI}), {Error, PS} end; {primary, PrimZip, FI} -> case prim_file:read_file_info(Archive) of {ok, FI2} when FI#file_info.mtime =:= FI2#file_info.mtime -> case foldl_archive(PrimZip, Acc, Fun) of {ok, _PrimZip2, Acc2} -> {Acc2, PS}; Error -> debug(PS, {primary, Error}), {Error, PS} end; Error -> debug(PS, {cache, {clear, Error}}), clear_cache(Archive, {ok, PrimZip}), apply_archive(PS, Fun, Acc, Archive) end; {Cache, FI} -> case prim_file:read_file_info(Archive) of {ok, FI2} when FI#file_info.mtime =:= FI2#file_info.mtime -> case Cache of {ok, PrimZip} -> case foldl_archive(PrimZip, Acc, Fun) of {ok, _PrimZip2, Acc2} -> {Acc2, PS}; Error -> debug(PS, {cache, {clear, Error}}), ok = clear_cache(Archive, Cache), debug(PS, {cache, Error}), erase(Archive), %% put(Archive, {Error, FI}), {Error, PS} end; Error -> debug(PS, {cache, Error}), {Error, PS} end; Error -> debug(PS, {cache, {clear, Error}}), ok = clear_cache(Archive, Cache), apply_archive(PS, Fun, Acc, Archive) end end. open_archive(Archive, Acc, Fun) -> case prim_file:read_file_info(Archive) of {ok, FileInfo} -> open_archive(Archive, FileInfo, Acc, Fun); {error, Reason} -> {error, Reason} end. %% Open the given archive and iterate through all files with an own %% wrapper fun in order to identify each file as a component list as %% returned from path_split/1. %% %% In the archive (zip) file, directory elements might or might not be %% present. To ensure consistency, a directory element is added if it %% does not already exist (ensure_virual_dir/6). NOTE that there will %% be no such directory element for the top directory of the archive. open_archive(Archive, FileInfo, Acc, Fun) -> FakeFI = FileInfo#file_info{type = directory}, Wrapper = fun({N, GI, GB}, {A, I, Dirs}) -> Components = path_split(N), Dirs2 = case Components of ["" | Dir] -> %% This is a directory [Dir | Dirs]; _ -> %% This is a regular file Dirs end, {Includes, Dirs3, A2} = ensure_virtual_dirs(Components, Fun, FakeFI, [{true, Components}], Dirs2, A), {_Continue, A3} = Fun({Components, GI, GB}, A2), {true, Includes, {A3, I, Dirs3}} end, prim_zip:open(Wrapper, {Acc, FakeFI, []}, Archive). ensure_virtual_dirs(Components, Fun, FakeFI, Includes, Dirs, Acc) -> case Components of [_] -> %% Don't add virtual dir for top directory {Includes, Dirs, Acc}; [_ | Dir] -> case lists:member(Dir, Dirs) of % BIF false -> %% The directory does not yet exist - add it GetInfo = fun() -> FakeFI end, GetBin = fun() -> <<>> end, VirtualDir = ["" | Dir], Includes2 = [{true, VirtualDir, GetInfo, GetBin} | Includes], Dirs2 = [Dir | Dirs], %% Recursively ensure dir elements on all levels {I, F, Acc2} = ensure_virtual_dirs(Dir, Fun, FakeFI, Includes2, Dirs2, Acc), {_Continue, Acc3} = Fun({VirtualDir, GetInfo, GetBin}, Acc2), {I, F, Acc3}; true -> %% The directory element does already exist %% Recursivly ensure dir elements on all levels ensure_virtual_dirs(Dir,Fun,FakeFI,Includes,Dirs,Acc) end end. foldl_archive(PrimZip, Acc, Fun) -> Wrapper = fun({Components, GI, GB}, A) -> %% Allow partial iteration at foldl {Continue, A2} = Fun({Components, GI, GB}, A), {Continue, true, A2} end, prim_zip:foldl(Wrapper, Acc, PrimZip). cache_new(PS) -> PS. clear_cache(Archive, Cache) -> erase(Archive), case Cache of {ok, PrimZip} -> prim_zip:close(PrimZip); {error, _} -> ok end. %%% -------------------------------------------------------- %%% Misc. functions. %%% -------------------------------------------------------- %%% Look for directory separators is_basename(File) -> case deep_member($/, File) of true -> false; false -> case erlang:system_info(os_type) of {win32, _} -> case File of [_,$: | _] -> false; _ -> not deep_member($\\, File) end; _ -> true end end. send_all(U, [IP | AL], Cmd) -> ?dbg(sendto, {U, IP, ?EBOOT_PORT, Cmd}), prim_inet:sendto(U, IP, ?EBOOT_PORT, Cmd), send_all(U, AL, Cmd); send_all(_U, [], _) -> ok. join(P, F) -> P ++ "/" ++ F. member(X, [X|_]) -> true; member(X, [_|Y]) -> member(X, Y); member(_X, []) -> false. deep_member(X, [X|_]) -> true; deep_member(X, [List | Y]) when is_list(List) -> deep_member(X, List) orelse deep_member(X, Y); deep_member(X, [Atom | Y]) when is_atom(Atom) -> deep_member(X, atom_to_list(Atom)) orelse deep_member(X, Y); deep_member(X, [_ | Y]) -> deep_member(X, Y); deep_member(_X, []) -> false. keymember(X, I, [Y | _]) when element(I,Y) =:= X -> true; keymember(X, I, [_ | T]) -> keymember(X, I, T); keymember(_X, _I, []) -> false. keysort(I, L) -> keysort(I, L, []). keysort(I, [X | L], Ls) -> keysort(I, L, keyins(X, I, Ls)); keysort(_I, [], Ls) -> Ls. keyins(X, I, [Y | T]) when X < element(I,Y) -> [X,Y|T]; keyins(X, I, [Y | T]) -> [Y | keyins(X, I, T)]; keyins(X, _I, []) -> [X]. to_strs([P|Paths]) when is_atom(P) -> [atom_to_list(P)|to_strs(Paths)]; to_strs([P|Paths]) when is_list(P) -> [P|to_strs(Paths)]; to_strs([_|Paths]) -> to_strs(Paths); to_strs([]) -> []. reverse([] = L) -> L; reverse([_] = L) -> L; reverse([A, B]) -> [B, A]; reverse([A, B | L]) -> lists:reverse(L, [B, A]). % BIF %% Returns a reversed list of path components, each component itself a %% reversed list (string), e.g. %% /path/to/file -> ["elif","ot","htap",""] %% /path/to/dir/ -> ["","rid","ot","htap",""] %% Note the "" marking leading and trailing / (slash). path_split(List) -> path_split(List, [], []). path_split([$/ | Tail], Path, Paths) -> path_split(Tail, [], [Path | Paths]); path_split([Head | Tail], Path, Paths) -> path_split(Tail, [Head | Path], Paths); path_split([], Path, Paths) -> [Path | Paths]. name_split(ArchiveFile, File0) -> File = absname(File0), do_name_split(ArchiveFile, File). do_name_split(undefined, File) -> %% Ignore primary archive case string_split(File, init:archive_extension(), []) of no_split -> %% Plain file {file, File}; {split, _RevArchiveBase, RevArchiveFile, []} -> %% Top dir in archive ArchiveFile = reverse(RevArchiveFile), {archive, ArchiveFile, []}; {split, _RevArchiveBase, RevArchiveFile, [$/ | FileInArchive]} -> %% File in archive ArchiveFile = reverse(RevArchiveFile), {archive, ArchiveFile, FileInArchive}; {split, _RevArchiveBase, _RevArchiveFile, _FileInArchive} -> %% False match. Assume plain file {file, File} end; do_name_split(ArchiveFile, File) -> %% Look first in primary archive case string_match(File, ArchiveFile, []) of no_match -> %% Archive or plain file do_name_split(undefined, File); {match, _RevPrimArchiveFile, FileInArchive} -> %% Primary archive {archive, ArchiveFile, FileInArchive} end. string_match([Char | File], [Char | Archive], RevTop) -> string_match(File, Archive, [Char | RevTop]); string_match([] = File, [], RevTop) -> {match, RevTop, File}; string_match([$/ | File], [], RevTop) -> {match, RevTop, File}; string_match(_File, _Archive, _RevTop) -> no_match. string_split([Char | File], [Char | Ext] = FullExt, RevTop) -> RevTop2 = [Char | RevTop], string_split2(File, Ext, RevTop, RevTop2, File, FullExt, RevTop2); string_split([Char | File], Ext, RevTop) -> string_split(File, Ext, [Char | RevTop]); string_split([], _Ext, _RevTop) -> no_split. string_split2([Char | File], [Char | Ext], RevBase, RevTop, SaveFile, SaveExt, SaveTop) -> string_split2(File, Ext, RevBase, [Char | RevTop], SaveFile, SaveExt, SaveTop); string_split2(File, [], RevBase, RevTop, _SaveFile, _SaveExt, _SaveTop) -> {split, RevBase, RevTop, File}; string_split2(_, _Ext, _RevBase, _RevTop, SaveFile, SaveExt, SaveTop) -> string_split(SaveFile, SaveExt, SaveTop). %% Parse list of ipv4 addresses ipv4_list([H | T]) -> IPV = if is_atom(H) -> ipv4_address(atom_to_list(H)); is_list(H) -> ipv4_address(H); true -> {error,einal} end, case IPV of {ok,IP} -> [IP | ipv4_list(T)]; _ -> ipv4_list(T) end; ipv4_list([]) -> []. %% %% Parse Ipv4 address: d1.d2.d3.d4 (from inet_parse) %% %% Return {ok, IP} | {error, einval} %% ipv4_address(Cs) -> case catch ipv4_addr(Cs, []) of {'EXIT',_} -> {error,einval}; Addr -> {ok,Addr} end. ipv4_addr([C | Cs], IP) when C >= $0, C =< $9 -> ipv4_addr(Cs, C-$0, IP). ipv4_addr([$.|Cs], N, IP) when N < 256 -> ipv4_addr(Cs, [N|IP]); ipv4_addr([C|Cs], N, IP) when C >= $0, C =< $9 -> ipv4_addr(Cs, N*10 + (C-$0), IP); ipv4_addr([], D, [C,B,A]) when D < 256 -> {A,B,C,D}. %% A simplified version of filename:absname/1 absname(Name) -> Name2 = normalize(Name, []), Name3 = case pathtype(Name2) of absolute -> Name2; relative -> case prim_file:get_cwd() of {ok, Cwd} -> Cwd ++ "/" ++ Name2; {error, _} -> Name2 end; volumerelative -> case prim_file:get_cwd() of {ok, Cwd} -> absname_vr(Name2, Cwd); {error, _} -> Name2 end end, path_flatten(Name3). %% Assumes normalized name absname_vr([$/ | NameRest], [Drive, $\: | _]) -> %% Absolute path on current drive. [Drive, $\: | NameRest]; absname_vr([Drive, $\: | NameRest], [Drive, $\: | _] = Cwd) -> %% Relative to current directory on current drive. Cwd ++ "/" ++ NameRest; absname_vr([Drive, $\: | NameRest], _) -> %% Relative to current directory on another drive. case prim_file:get_cwd([Drive, $\:]) of {ok, DriveCwd} -> DriveCwd ++ "/" ++ NameRest; {error, _} -> [Drive, $\:, $/] ++ NameRest end. %% Assumes normalized name pathtype(Name) when is_list(Name) -> case erlang:system_info(os_type) of {unix, _} -> unix_pathtype(Name); {win32, _} -> win32_pathtype(Name); {vxworks, _} -> case vxworks_first(Name) of {device, _Rest, _Dev} -> absolute; _ -> relative end end. unix_pathtype(Name) -> case Name of [$/|_] -> absolute; [List|Rest] when is_list(List) -> unix_pathtype(List++Rest); [Atom|Rest] when is_atom(Atom) -> atom_to_list(Atom)++Rest; _ -> relative end. win32_pathtype(Name) -> case Name of [List|Rest] when is_list(List) -> win32_pathtype(List++Rest); [Atom|Rest] when is_atom(Atom) -> win32_pathtype(atom_to_list(Atom)++Rest); [Char, List | Rest] when is_list(List) -> win32_pathtype([Char | List++Rest]); [$/, $/|_] -> absolute; [$/|_] -> volumerelative; [C1, C2, List | Rest] when is_list(List) -> win32_pathtype([C1, C2|List ++ Rest]); [_Letter, $:, $/|_] -> absolute; [_Letter, $:|_] -> volumerelative; _ -> relative end. vxworks_first(Name) -> case Name of [] -> {not_device, [], []}; [$/ | T] -> vxworks_first2(device, T, [$/]); [H | T] when is_list(H) -> vxworks_first(H ++ T); [H | T] -> vxworks_first2(not_device, T, [H]) end. vxworks_first2(Devicep, Name, FirstComp) -> case Name of [] -> {Devicep, [], FirstComp}; [$/ |T ] -> {Devicep, [$/ | T], FirstComp}; [$: | T]-> {device, T, [$: | FirstComp]}; [H | T] when is_list(H) -> vxworks_first2(Devicep, H ++ T, FirstComp); [H | T] -> vxworks_first2(Devicep, T, [H | FirstComp]) end. normalize(Name, Acc) -> case Name of [List | Rest] when is_list(List) -> normalize(List ++ Rest, Acc); [Atom | Rest] when is_atom(Atom) -> normalize(atom_to_list(Atom) ++ Rest, Acc); [$\\ | Chars] -> normalize(Chars, [$/ | Acc]); [Char | Chars] -> normalize(Chars, [Char | Acc]); [] -> reverse(Acc) end. %% Remove .. and . from the path, e.g. %% /path/./to/this/../file -> /path/to/file path_flatten(Name) -> path_flatten(Name,[],[]). path_flatten([$/,$.,$.,$/|Rest],_RevLast,RevTop) -> path_flatten(Rest,[],RevTop); path_flatten([$/,$.,$/|Rest],RevLast,RevTop) -> path_flatten([$/|Rest],RevLast,RevTop); path_flatten([$/,$.,$.],_RevLast,RevTop) -> path_flatten([],[],RevTop); path_flatten([$/,$.],RevLast,RevTop) -> path_flatten([],RevLast,RevTop); path_flatten([$/],RevLast,RevTop) -> path_flatten([],RevLast,RevTop); path_flatten([$/|Rest],RevLast,RevTop) -> path_flatten(Rest,[],[$/|RevLast++RevTop]); path_flatten([Ch|Rest],RevLast,RevTop) -> path_flatten(Rest,[Ch|RevLast],RevTop); path_flatten([],RevLast,RevTop) -> reverse(RevLast++RevTop).