%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2018-2019. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
-module(socket).
-compile(no_native).
-compile({no_auto_import,[error/1]}).
%% Administrative and "global" utility functions
-export([
on_load/0, on_load/1,
ensure_sockaddr/1,
debug/1,
%% command/1,
info/0, info/1,
supports/0, supports/1, supports/2, supports/3
]).
-export([
open/2, open/3, open/4,
bind/2, bind/3,
connect/2, connect/3,
listen/1, listen/2,
accept/1, accept/2,
send/2, send/3, send/4,
sendto/3, sendto/4, sendto/5,
sendmsg/2, sendmsg/3, sendmsg/4,
recv/1, recv/2, recv/3, recv/4,
recvfrom/1, recvfrom/2, recvfrom/3, recvfrom/4,
recvmsg/1, recvmsg/2, recvmsg/3, recvmsg/5,
close/1,
shutdown/2,
setopt/4,
getopt/3,
sockname/1,
peername/1,
cancel/2
]).
-export_type([
select_tag/0,
select_ref/0,
select_info/0,
socket_counters/0,
socket_counter/0,
socket_info/0,
%% command/0,
domain/0,
type/0,
protocol/0,
socket/0,
port_number/0,
ip_address/0,
ip4_address/0,
ip6_address/0,
sockaddr/0,
sockaddr_in4/0,
sockaddr_in6/0,
sockaddr_un/0,
accept_flags/0,
accept_flag/0,
send_flags/0,
send_flag/0,
recv_flags/0,
recv_flag/0,
shutdown_how/0,
sockopt_level/0,
otp_socket_option/0,
socket_option/0,
ip_socket_option/0,
ipv6_socket_option/0,
tcp_socket_option/0,
udp_socket_option/0,
sctp_socket_option/0,
raw_socket_option/0,
timeval/0,
ip_tos/0,
ip_mreq/0,
ip_mreq_source/0,
ip_pmtudisc/0,
ip_msfilter_mode/0,
ip_msfilter/0,
ip_pktinfo/0,
ipv6_mreq/0,
ipv6_pmtudisc/0,
ipv6_pktinfo/0,
in6_flow_info/0,
in6_scope_id/0,
sctp_assoc_id/0,
sctp_sndrcvinfo/0,
sctp_event_subscribe/0,
sctp_assocparams/0,
sctp_initmsg/0,
sctp_rtoinfo/0,
msghdr_flag/0,
msghdr_flags/0,
msghdr/0,
cmsghdr_level/0,
cmsghdr_type/0,
%% cmsghdr_data/0,
cmsghdr_recv/0, cmsghdr_send/0,
uint8/0,
uint16/0,
uint20/0,
uint32/0,
int32/0
]).
%% The command type has the general form:
%% #{
%% command := atom(),
%% data := term()
%% }
%% But only certain values are actually valid, so the type gets the form:
-type debug_command() :: #{
command := debug,
data := boolean()
}.
%% -type command() :: debug_command().
-type socket_counters() :: [{socket_counter(), non_neg_integer()}].
-type socket_counter() :: read_byte | read_fails | read_pkg | read_tries |
read_waits | write_byte | write_fails | write_pkg |
write_tries | write_waits.
-type socket_info() :: #{counters := socket_counters(),
num_readers := non_neg_integer(),
num_writers := non_neg_integer(),
num_acceptors := non_neg_integer()}.
-type uint8() :: 0..16#FF.
-type uint16() :: 0..16#FFFF.
-type uint20() :: 0..16#FFFFF.
-type uint32() :: 0..16#FFFFFFFF.
-type int32() :: -2147483648..2147483647.
%% We support only a subset of all domains.
-type domain() :: local | inet | inet6.
%% We support only a subset of all types.
%% RDM - Reliably Delivered Messages
-type type() :: stream | dgram | raw | rdm | seqpacket.
%% We support only a subset of all protocols:
%% Note that the '{raw, integer()}' construct is intended
%% to be used with type = raw.
%% Note also that only the "superuser" can create a raw socket.
-type protocol() :: ip | tcp | udp | sctp | icmp | igmp | {raw, integer()}.
-type port_number() :: 0..65535.
-type ip_address() :: ip4_address() | ip6_address().
-type ip4_address() :: {0..255, 0..255, 0..255, 0..255}.
-type in6_flow_info() :: uint20().
-type in6_scope_id() :: uint32().
-type ip6_address() ::
{0..65535,
0..65535,
0..65535,
0..65535,
0..65535,
0..65535,
0..65535,
0..65535}.
-type timeval() :: #{sec := integer(),
usec := integer()}.
-type ip_pktinfo() :: #{
ifindex := non_neg_integer(), % Interface Index
spec_dst := ip4_address(), % Local Address
addr := ip4_address() % Header Destination address
}.
%% If the integer value is used, its up to the caller to ensure its valid!
-type ip_tos() :: lowdeley |
throughput |
reliability |
mincost |
integer().
%% This type is used when requesting to become member of a multicast
%% group with a call to setopt. Example:
%%
%% socket:setopt(Socket, ip, add_membership, #{multiaddr => Addr,
%% interface => any}).
%%
%% Its also used when removing from a multicast group. Example:
%%
%% socket:setopt(Socket, ip, drop_membership, #{multiaddr => Addr,
%% interface => any}).
%%
-type ip_mreq() :: #{multiaddr := ip4_address(),
interface := any | ip4_address()}.
%% -type ip_mreqn() :: #{multiaddr := ip4_address(),
%% address := any | ip4_address(),
%% ifindex := integer()}.
-type ip_mreq_source() :: #{multiaddr := ip4_address(),
interface := ip4_address(),
sourceaddr := ip4_address()}.
-type ip_pmtudisc() :: want | dont | do | probe.
%% multiaddr: Multicast group address
%% interface: Address of local interface
%% mode: Filter mode
%% slist: List of source addresses
-type ip_msfilter_mode() :: include | exclude.
-type ip_msfilter() :: #{multiaddr := ip4_address(),
interface := ip4_address(),
mode := ip_msfilter_mode(),
slist := [ip4_address()]}.
-type ipv6_mreq() :: #{multiaddr := ip6_address(),
interface := non_neg_integer()}.
-type ipv6_pmtudisc() :: ip_pmtudisc().
-type ipv6_pktinfo() :: #{
addr := ip6_address(),
ifindex := integer()
}.
-type sctp_assoc_id() :: int32().
-type sctp_sndrcvinfo() :: #{
stream := uint16(),
ssn := uint16(),
flags := uint16(),
ppid := uint16(),
context := uint16(),
timetolive := uint16(),
tsn := uint16(),
cumtsn := uint16(),
assoc_id := sctp_assoc_id()
}.
-type sctp_event_subscribe() :: #{data_in := boolean(),
association := boolean(),
address := boolean(),
send_failure := boolean(),
peer_error := boolean(),
shutdown := boolean(),
partial_delivery := boolean(),
adaptation_layer := boolean(),
authentication := boolean(),
sender_dry := boolean()}.
-type sctp_assocparams() :: #{assoc_id := sctp_assoc_id(),
max_rxt := uint16(),
num_peer_dests := uint16(),
peer_rwnd := uint32(),
local_rwnd := uint32(),
cookie_life := uint32()}.
-type sctp_initmsg() :: #{num_outstreams := uint16(),
max_instreams := uint16(),
max_attempts := uint16(),
max_init_timeo := uint16()
}.
-type sctp_rtoinfo() :: #{assoc_id := sctp_assoc_id(),
initial := uint32(),
max := uint32(),
min := uint32()}.
-type sockaddr_un() :: #{family := local,
path := binary() | string()}.
-type sockaddr_in4() :: #{family := inet,
port := port_number(),
%% The 'broadcast' here is the "limited broadcast"
addr := any | broadcast | loopback | ip4_address()}.
-type sockaddr_in6() :: #{family := inet6,
port := port_number(),
addr := any | loopback | ip6_address(),
flowinfo := in6_flow_info(),
scope_id := in6_scope_id()}.
-type sockaddr() :: sockaddr_in4() |
sockaddr_in6() |
sockaddr_un().
-define(SOCKADDR_IN4_DEFAULTS(A), #{port => 0,
addr => A}).
-define(SOCKADDR_IN4_DEFAULTS, ?SOCKADDR_IN4_DEFAULTS(any)).
-define(SOCKADDR_IN4_DEFAULT(A), (?SOCKADDR_IN4_DEFAULTS(A))#{family => inet}).
-define(SOCKADDR_IN6_DEFAULTS(A), #{port => 0,
addr => A,
flowinfo => 0,
scope_id => 0}).
-define(SOCKADDR_IN6_DEFAULTS, ?SOCKADDR_IN6_DEFAULTS(any)).
-define(SOCKADDR_IN6_DEFAULT(A), (?SOCKADDR_IN6_DEFAULTS(A))#{family => inet6}).
%% otp - This option is internal to our (OTP) implementation.
%% socket - The socket layer (SOL_SOCKET).
%% ip - The IP layer (SOL_IP or is it IPPROTO_IP?).
%% ipv6 - The IPv6 layer (SOL_IPV6).
%% tcp - The TCP (Transport Control Protocol) layer (IPPROTO_TCP).
%% udp - The UDP (User Datagram Protocol) layer (IPPROTO_UDP).
%% sctp - The SCTP (Stream Control Transmission Protocol) layer (IPPROTO_SCTP).
%% Int - Raw level, sent down and used "as is".
%% Its up to the caller to make sure this is correct!
-type sockopt_level() :: otp |
socket |
ip | ipv6 | tcp | udp | sctp |
non_neg_integer().
%% There are some options that are 'read-only'.
%% Should those be included here or in a special list?
%% Should we just document it and leave it to the user?
%% Or catch it in the encode functions?
%% A setopt for a readonly option leads to einval?
%% Do we really need a sndbuf?
-type otp_socket_option() :: debug |
iow |
controlling_process |
rcvbuf | % sndbuf |
rcvctrlbuf |
sndctrlbuf |
fd.
%% Shall we have special treatment of linger??
%% read-only options:
%% domain | protocol | type.
%% FreeBSD (only?): acceptfilter
-type socket_option() :: acceptconn |
acceptfilter |
bindtodevice |
broadcast |
busy_poll |
debug |
domain |
dontroute |
error |
keepalive |
linger |
mark |
oobinline |
passcred |
peek_off |
peekcred |
priority |
protocol |
rcvbuf |
rcvbufforce |
rcvlowat |
rcvtimeo |
reuseaddr |
reuseport |
rxq_ovfl |
setfib |
sndbuf |
sndbufforce |
sndlowat |
sndtimeo |
timestamp |
type.
%% Read-only options:
%% mtu
%%
%% Options only valid on FreeBSD?:
%% dontfrag
%% Options only valid for RAW sockets:
%% nodefrag (linux only?)
-type ip_socket_option() :: add_membership |
add_source_membership |
block_source |
dontfrag |
drop_membership |
drop_source_membership |
freebind |
hdrincl |
minttl |
msfilter |
mtu |
mtu_discover |
multicast_all |
multicast_if |
multicast_loop |
multicast_ttl |
nodefrag |
options |
pktinfo |
recverr |
recvif |
recvdstaddr |
recvopts |
recvorigdstaddr |
recvtos |
recvttl |
retopts |
router_alert |
sndsrcaddr |
tos |
transparent |
ttl |
unblock_source.
-type ipv6_socket_option() ::
addrform |
add_membership |
authhdr |
auth_level |
checksum |
drop_membership |
dstopts |
esp_trans_level |
esp_network_level |
faith |
flowinfo |
hoplimit |
hopopts |
ipcomp_level |
join_group |
leave_group |
mtu |
mtu_discover |
multicast_hops |
multicast_if |
multicast_loop |
portrange |
pktoptions |
recverr |
recvpktinfo | pktinfo |
recvtclass |
router_alert |
rthdr |
tclass |
unicast_hops |
use_min_mtu |
v6only.
-type tcp_socket_option() :: congestion |
cork |
info |
keepcnt |
keepidle |
keepintvl |
maxseg |
md5sig |
nodelay |
noopt |
nopush |
syncnt |
user_timeout.
-type udp_socket_option() :: cork.
-type sctp_socket_option() ::
adaption_layer |
associnfo |
auth_active_key |
auth_asconf |
auth_chunk |
auth_key |
auth_delete_key |
autoclose |
context |
default_send_params |
delayed_ack_time |
disable_fragments |
hmac_ident |
events |
explicit_eor |
fragment_interleave |
get_peer_addr_info |
initmsg |
i_want_mapped_v4_addr |
local_auth_chunks |
maxseg |
maxburst |
nodelay |
partial_delivery_point |
peer_addr_params |
peer_auth_chunks |
primary_addr |
reset_streams |
rtoinfo |
set_peer_primary_addr |
status |
use_ext_recvinfo.
-type raw_socket_option() :: filter.
%% -type plain_socket_option() :: integer().
%% -type sockopt() :: otp_socket_option() |
%% socket_option() |
%% ip_socket_option() |
%% ipv6_socket_option() |
%% tcp_socket_option() |
%% udp_socket_option() |
%% sctp_socket_option() |
%% raw_socket_option() |
%% plain_socket_option().
-record(socket, {ref :: reference()}).
-opaque socket() :: #socket{}.
-type accept_flags() :: [accept_flag()].
-type accept_flag() :: nonblock | cloexec.
-type send_flags() :: [send_flag()].
-type send_flag() :: confirm |
dontroute |
eor |
more |
nosignal |
oob.
%% Extend with OWN flags for other usage:
%% - adapt-buffer-sz:
%% This will have the effect that the nif recvfrom will use
%% MSG_PEEK to ensure no part of the message is lost, but if
%% necessary adapt (increase) the buffer size until all of
%% it fits.
%%
%% Note that not all of these flags are useful for every recv function!
%%
-type recv_flags() :: [recv_flag()].
-type recv_flag() :: cmsg_cloexec |
errqueue |
oob |
peek |
trunc.
-type shutdown_how() :: read | write | read_write.
-type msghdr_flag() :: ctrunc | eor | errqueue | oob | trunc.
-type msghdr_flags() :: [msghdr_flag()].
-type msghdr() :: #{
%% *Optional* target address
%% Used on an unconnected socket to specify the
%% target address for a datagram.
addr := sockaddr(),
iov := [binary()],
%% The maximum size of the control buffer is platform
%% specific. It is the users responsibility to ensure
%% that its not exceeded.
ctrl := [cmsghdr_recv()] | [cmsghdr_send()],
%% Only valid with recvmsg
flags := msghdr_flags()
}.
%% We are able to (completely) decode *some* control message headers.
%% Even if we are able to decode both level and type, we may not be
%% able to decode the data, in which case it will be a binary.
-type cmsghdr_level() :: socket | ip | ipv6 | integer().
-type cmsghdr_type() :: timestamp |
pktinfo |
tos |
ttl |
rights |
credentials |
origdstaddr |
integer().
-type cmsghdr_recv() ::
#{level := socket, type := timestamp, data := timeval()} |
#{level := socket, type := rights, data := binary()} |
#{level := socket, type := credentials, data := binary()} |
#{level := socket, type := integer(), data := binary()} |
#{level := ip, type := tos, data := ip_tos()} |
#{level := ip, type := ttl, data := integer()} |
#{level := ip, type := pktinfo, data := ip_pktinfo()} |
#{level := ip, type := origdstaddr, data := sockaddr_in4()} |
#{level := ip, type := integer(), data := binary()} |
#{level := ipv6, type := pktinfo, data := ipv6_pktinfo()} |
#{level := ipv6, type := integer(), data := binary()} |
#{level := integer(), type := integer(), data := binary()}.
-type cmsghdr_send() ::
#{level := socket, type := integer(), data := binary()} |
#{level := ip, type := tos, data := ip_tos() | binary()} |
#{level := ip, type := ttl, data := integer() | binary()} |
#{level := ip, type := integer(), data := binary()} |
#{level := ipv6, type := integer(), data := binary()} |
#{level := udp, type := integer(), data := binary()} |
#{level := integer(), type := integer(), data := binary()}.
-opaque select_tag() :: atom().
-opaque select_ref() :: reference().
%% -record(select_info, {tag :: select_tag(), ref :: select_ref()}).
-type select_info() :: {select_info, select_tag(), select_ref()}.
-define(SELECT_INFO(T, R), {select_info, T, R}).
-define(SELECT(T, R), {select, ?SELECT_INFO(T, R)}).
%% This is used in messages sent from the nif-code to erlang processes:
%%
%% {?SOCKET_TAG, Socket :: socket(), Tag :: atom(), Info :: term()}
%%
-define(SOCKET_TAG, '$socket').
-define(SOCKET_DOMAIN_LOCAL, 1).
-define(SOCKET_DOMAIN_UNIX, ?SOCKET_DOMAIN_LOCAL).
-define(SOCKET_DOMAIN_INET, 2).
-define(SOCKET_DOMAIN_INET6, 3).
-define(SOCKET_TYPE_STREAM, 1).
-define(SOCKET_TYPE_DGRAM, 2).
-define(SOCKET_TYPE_RAW, 3).
%% -define(SOCKET_TYPE_RDM, 4).
-define(SOCKET_TYPE_SEQPACKET, 5).
-define(SOCKET_PROTOCOL_DEFAULT, 0).
-define(SOCKET_PROTOCOL_IP, 1).
-define(SOCKET_PROTOCOL_TCP, 2).
-define(SOCKET_PROTOCOL_UDP, 3).
-define(SOCKET_PROTOCOL_SCTP, 4).
-define(SOCKET_PROTOCOL_ICMP, 5).
-define(SOCKET_PROTOCOL_IGMP, 6).
-define(SOCKET_LISTEN_BACKLOG_DEFAULT, 5).
-define(SOCKET_ACCEPT_TIMEOUT_DEFAULT, infinity).
-define(SOCKET_SEND_FLAG_CONFIRM, 0).
-define(SOCKET_SEND_FLAG_DONTROUTE, 1).
-define(SOCKET_SEND_FLAG_EOR, 2).
-define(SOCKET_SEND_FLAG_MORE, 3).
-define(SOCKET_SEND_FLAG_NOSIGNAL, 4).
-define(SOCKET_SEND_FLAG_OOB, 5).
-define(SOCKET_SEND_FLAGS_DEFAULT, []).
-define(SOCKET_SEND_TIMEOUT_DEFAULT, infinity).
-define(SOCKET_SENDTO_FLAGS_DEFAULT, []).
-define(SOCKET_SENDTO_TIMEOUT_DEFAULT, ?SOCKET_SEND_TIMEOUT_DEFAULT).
-define(SOCKET_SENDMSG_FLAGS_DEFAULT, []).
-define(SOCKET_SENDMSG_TIMEOUT_DEFAULT, ?SOCKET_SEND_TIMEOUT_DEFAULT).
-define(SOCKET_RECV_FLAG_CMSG_CLOEXEC, 0).
-define(SOCKET_RECV_FLAG_ERRQUEUE, 1).
-define(SOCKET_RECV_FLAG_OOB, 2).
-define(SOCKET_RECV_FLAG_PEEK, 3).
-define(SOCKET_RECV_FLAG_TRUNC, 4).
-define(SOCKET_RECV_FLAGS_DEFAULT, []).
-define(SOCKET_RECV_TIMEOUT_DEFAULT, infinity).
-define(SOCKET_OPT_LEVEL_OTP, 0).
-define(SOCKET_OPT_LEVEL_SOCKET, 1).
-define(SOCKET_OPT_LEVEL_IP, 2).
-define(SOCKET_OPT_LEVEL_IPV6, 3).
-define(SOCKET_OPT_LEVEL_TCP, 4).
-define(SOCKET_OPT_LEVEL_UDP, 5).
-define(SOCKET_OPT_LEVEL_SCTP, 6).
%% *** OTP (socket) options
-define(SOCKET_OPT_OTP_DEBUG, 1).
-define(SOCKET_OPT_OTP_IOW, 2).
-define(SOCKET_OPT_OTP_CTRL_PROC, 3).
-define(SOCKET_OPT_OTP_RCVBUF, 4).
%%-define(SOCKET_OPT_OTP_SNDBUF, 5).
-define(SOCKET_OPT_OTP_RCVCTRLBUF, 6).
-define(SOCKET_OPT_OTP_SNDCTRLBUF, 7).
-define(SOCKET_OPT_OTP_FD, 8).
-define(SOCKET_OPT_OTP_DOMAIN, 16#FF01). % INTERNAL
-define(SOCKET_OPT_OTP_TYPE, 16#FF02). % INTERNAL
-define(SOCKET_OPT_OTP_PROTOCOL, 16#FF03). % INTERNAL
%% *** SOCKET (socket) options
-define(SOCKET_OPT_SOCK_ACCEPTCONN, 1).
%% -define(SOCKET_OPT_SOCK_ACCEPTFILTER, 2). % FreeBSD
-define(SOCKET_OPT_SOCK_BINDTODEVICE, 3).
-define(SOCKET_OPT_SOCK_BROADCAST, 4).
%% -define(SOCKET_OPT_SOCK_BUSY_POLL, 5).
-define(SOCKET_OPT_SOCK_DEBUG, 6).
-define(SOCKET_OPT_SOCK_DOMAIN, 7).
-define(SOCKET_OPT_SOCK_DONTROUTE, 8).
%% -define(SOCKET_OPT_SOCK_ERROR, 9).
-define(SOCKET_OPT_SOCK_KEEPALIVE, 10).
-define(SOCKET_OPT_SOCK_LINGER, 11).
%% -define(SOCKET_OPT_SOCK_MARK, 12).
-define(SOCKET_OPT_SOCK_OOBINLINE, 13).
%% -define(SOCKET_OPT_SOCK_PASSCRED, 14).
-define(SOCKET_OPT_SOCK_PEEK_OFF, 15).
%% -define(SOCKET_OPT_SOCK_PEEKCRED, 16).
-define(SOCKET_OPT_SOCK_PRIORITY, 17).
-define(SOCKET_OPT_SOCK_PROTOCOL, 18).
-define(SOCKET_OPT_SOCK_RCVBUF, 19).
%% -define(SOCKET_OPT_SOCK_RCVBUFFORCE, 20).
-define(SOCKET_OPT_SOCK_RCVLOWAT, 21).
-define(SOCKET_OPT_SOCK_RCVTIMEO, 22).
-define(SOCKET_OPT_SOCK_REUSEADDR, 23).
-define(SOCKET_OPT_SOCK_REUSEPORT, 24).
%% -define(SOCKET_OPT_SOCK_RXQ_OVFL, 25).
%% -define(SOCKET_OPT_SOCK_SETFIB, 26). % FreeBSD
-define(SOCKET_OPT_SOCK_SNDBUF, 27).
%% -define(SOCKET_OPT_SOCK_SNDBUFFORCE, 28).
-define(SOCKET_OPT_SOCK_SNDLOWAT, 29).
-define(SOCKET_OPT_SOCK_SNDTIMEO, 30).
-define(SOCKET_OPT_SOCK_TIMESTAMP, 31).
-define(SOCKET_OPT_SOCK_TYPE, 32).
%% *** IP (socket) options
-define(SOCKET_OPT_IP_ADD_MEMBERSHIP, 1).
-define(SOCKET_OPT_IP_ADD_SOURCE_MEMBERSHIP, 2).
-define(SOCKET_OPT_IP_BLOCK_SOURCE, 3).
%% -define(SOCKET_OPT_IP_DONTFRAG, 4). % FreeBSD
-define(SOCKET_OPT_IP_DROP_MEMBERSHIP, 5).
-define(SOCKET_OPT_IP_DROP_SOURCE_MEMBERSHIP, 6).
-define(SOCKET_OPT_IP_FREEBIND, 7).
-define(SOCKET_OPT_IP_HDRINCL, 8).
-define(SOCKET_OPT_IP_MINTTL, 9).
-define(SOCKET_OPT_IP_MSFILTER, 10).
-define(SOCKET_OPT_IP_MTU, 11).
-define(SOCKET_OPT_IP_MTU_DISCOVER, 12).
-define(SOCKET_OPT_IP_MULTICAST_ALL, 13).
-define(SOCKET_OPT_IP_MULTICAST_IF, 14).
-define(SOCKET_OPT_IP_MULTICAST_LOOP, 15).
-define(SOCKET_OPT_IP_MULTICAST_TTL, 16).
-define(SOCKET_OPT_IP_NODEFRAG, 17).
%% -define(SOCKET_OPT_IP_OPTIONS, 18). % FreeBSD
-define(SOCKET_OPT_IP_PKTINFO, 19).
-define(SOCKET_OPT_IP_RECVDSTADDR, 20). % FreeBSD
-define(SOCKET_OPT_IP_RECVERR, 21).
-define(SOCKET_OPT_IP_RECVIF, 22).
-define(SOCKET_OPT_IP_RECVOPTS, 23).
-define(SOCKET_OPT_IP_RECVORIGDSTADDR, 24).
-define(SOCKET_OPT_IP_RECVTOS, 25).
-define(SOCKET_OPT_IP_RECVTTL, 26).
-define(SOCKET_OPT_IP_RETOPTS, 27).
-define(SOCKET_OPT_IP_ROUTER_ALERT, 28).
-define(SOCKET_OPT_IP_SENDSRCADDR, 29). % FreeBSD
-define(SOCKET_OPT_IP_TOS, 30).
-define(SOCKET_OPT_IP_TRANSPARENT, 31).
-define(SOCKET_OPT_IP_TTL, 32).
-define(SOCKET_OPT_IP_UNBLOCK_SOURCE, 33).
%% *** IPv6 (socket) options
-define(SOCKET_OPT_IPV6_ADDRFORM, 1).
-define(SOCKET_OPT_IPV6_ADD_MEMBERSHIP, 2).
-define(SOCKET_OPT_IPV6_AUTHHDR, 3). % Obsolete?
%% -define(SOCKET_OPT_IPV6_AUTH_LEVEL, 4). % FreeBSD
%% -define(SOCKET_OPT_IPV6_CHECKSUM, 5). % FreeBSD
-define(SOCKET_OPT_IPV6_DROP_MEMBERSHIP, 6).
-define(SOCKET_OPT_IPV6_DSTOPTS, 7).
%% -define(SOCKET_OPT_IPV6_ESP_NETWORK_LEVEL, 8). % FreeBSD
%% -define(SOCKET_OPT_IPV6_ESP_TRANS_LEVEL, 9). % FreeBSD
%% -define(SOCKET_OPT_IPV6_FAITH, 10). % FreeBSD
-define(SOCKET_OPT_IPV6_FLOWINFO, 11).
-define(SOCKET_OPT_IPV6_HOPLIMIT, 12).
-define(SOCKET_OPT_IPV6_HOPOPTS, 13).
%% -define(SOCKET_OPT_IPV6_IPCOMP_LEVEL, 14). % FreeBSD
%% -define(SOCKET_OPT_IPV6_JOIN_GROUP, 15). % FreeBSD
%% -define(SOCKET_OPT_IPV6_LEAVE_GROUP, 16). % FreeBSD
-define(SOCKET_OPT_IPV6_MTU, 17).
-define(SOCKET_OPT_IPV6_MTU_DISCOVER, 18).
-define(SOCKET_OPT_IPV6_MULTICAST_HOPS, 19).
-define(SOCKET_OPT_IPV6_MULTICAST_IF, 20).
-define(SOCKET_OPT_IPV6_MULTICAST_LOOP, 21).
%% -define(SOCKET_OPT_IPV6_PORTRANGE, 22). % FreeBSD
%% -define(SOCKET_OPT_IPV6_PKTOPTIONS, 23). % FreeBSD
-define(SOCKET_OPT_IPV6_RECVERR, 24).
-define(SOCKET_OPT_IPV6_RECVPKTINFO, 25). % On FreeBSD: PKTINFO
%% -define(SOCKET_OPT_IPV6_RECVTCLASS, 26).
-define(SOCKET_OPT_IPV6_ROUTER_ALERT, 27).
-define(SOCKET_OPT_IPV6_RTHDR, 28).
%% -define(SOCKET_OPT_IPV6_TCLASS, 29). % FreeBSD
-define(SOCKET_OPT_IPV6_UNICAST_HOPS, 30).
%% -define(SOCKET_OPT_IPV6_USE_MIN_MTU, 31). % FreeBSD
-define(SOCKET_OPT_IPV6_V6ONLY, 32).
%% *** TCP (socket) options
-define(SOCKET_OPT_TCP_CONGESTION, 1).
-define(SOCKET_OPT_TCP_CORK, 2).
%% -define(SOCKET_OPT_TCP_INFO, 3).
%% -define(SOCKET_OPT_TCP_KEEPCNT, 4).
%% -define(SOCKET_OPT_TCP_KEEPIDLE, 5).
%% -define(SOCKET_OPT_TCP_KEEPINTVL, 6).
-define(SOCKET_OPT_TCP_MAXSEG, 7).
%% -define(SOCKET_OPT_TCP_MD5SIG, 8).
-define(SOCKET_OPT_TCP_NODELAY, 9).
%% -define(SOCKET_OPT_TCP_NOOPT, 10).
%% -define(SOCKET_OPT_TCP_NOPUSH, 11).
%% -define(SOCKET_OPT_TCP_SYNCNT, 12).
%% -define(SOCKET_OPT_TCP_USER_TIMEOUT, 13).
%% *** UDP (socket) options
-define(SOCKET_OPT_UDP_CORK, 1).
%% *** SCTP (socket) options
%% -define(SOCKET_OPT_SCTP_ADAPTION_LAYER, 1).
-define(SOCKET_OPT_SCTP_ASSOCINFO, 2).
%% -define(SOCKET_OPT_SCTP_AUTH_ACTIVE_KEY, 3).
%% -define(SOCKET_OPT_SCTP_AUTH_ASCONF, 4).
%% -define(SOCKET_OPT_SCTP_AUTH_CHUNK, 5).
%% -define(SOCKET_OPT_SCTP_AUTH_KEY, 6).
%% -define(SOCKET_OPT_SCTP_AUTH_DELETE_KEY, 7).
-define(SOCKET_OPT_SCTP_AUTOCLOSE, 8).
%% -define(SOCKET_OPT_SCTP_CONTEXT, 9).
%% -define(SOCKET_OPT_SCTP_DEFAULT_SEND_PARAMS, 10).
%% -define(SOCKET_OPT_SCTP_DELAYED_ACK_TIME, 11).
-define(SOCKET_OPT_SCTP_DISABLE_FRAGMENTS, 12).
%% -define(SOCKET_OPT_SCTP_HMAC_IDENT, 13).
-define(SOCKET_OPT_SCTP_EVENTS, 14).
%% -define(SOCKET_OPT_SCTP_EXPLICIT_EOR, 15).
%% -define(SOCKET_OPT_SCTP_FRAGMENT_INTERLEAVE, 16).
%% -define(SOCKET_OPT_SCTP_GET_PEER_ADDR_INFO, 17).
-define(SOCKET_OPT_SCTP_INITMSG, 18).
%% -define(SOCKET_OPT_SCTP_I_WANT_MAPPED_V4_ADDR, 19).
%% -define(SOCKET_OPT_SCTP_LOCAL_AUTH_CHUNKS, 20).
-define(SOCKET_OPT_SCTP_MAXSEG, 21).
%% -define(SOCKET_OPT_SCTP_MAXBURST, 22).
-define(SOCKET_OPT_SCTP_NODELAY, 23).
%% -define(SOCKET_OPT_SCTP_PARTIAL_DELIVERY_POINT, 24).
%% -define(SOCKET_OPT_SCTP_PEER_ADDR_PARAMS, 25).
%% -define(SOCKET_OPT_SCTP_PEER_AUTH_CHUNKS, 26).
%% -define(SOCKET_OPT_SCTP_PRIMARY_ADDR, 27).
%% -define(SOCKET_OPT_SCTP_RESET_STREAMS, 28).
-define(SOCKET_OPT_SCTP_RTOINFO, 29).
%% -define(SOCKET_OPT_SCTP_SET_PEER_PRIMARY_ADDR, 30).
%% -define(SOCKET_OPT_SCTP_STATUS, 31).
%% -define(SOCKET_OPT_SCTP_USE_EXT_RECVINFO, 32).
-define(SOCKET_SHUTDOWN_HOW_READ, 0).
-define(SOCKET_SHUTDOWN_HOW_WRITE, 1).
-define(SOCKET_SHUTDOWN_HOW_READ_WRITE, 2).
-define(SOCKET_SUPPORTS_OPTIONS, 16#0001).
-define(SOCKET_SUPPORTS_SCTP, 16#0002).
-define(SOCKET_SUPPORTS_IPV6, 16#0003).
-define(SOCKET_SUPPORTS_LOCAL, 16#0004).
%% ===========================================================================
%%
%% Administrative and utility API
%%
%% ===========================================================================
-spec on_load() -> ok.
%% Should we require that the Extra arg is a map?
on_load() ->
on_load(#{}).
-spec on_load(Extra) -> ok when
Extra :: map().
on_load(Extra) ->
ok = erlang:load_nif(atom_to_list(?MODULE), Extra).
-spec info() -> map().
info() ->
nif_info().
-spec debug(D) -> ok when
D :: boolean().
debug(D) when is_boolean(D) ->
command(#{command => debug,
data => D}).
-spec command(Command) -> ok when
Command :: debug_command().
command(#{command := debug,
data := Dbg} = Command) when is_boolean(Dbg) ->
nif_command(Command).
%% ===========================================================================
%%
%% info - Get miscellaneous information about a socket.
%%
%% Generates a list of various info about the socket, such as counter values.
%%
%% Do *not* call this function often.
%%
%% ===========================================================================
-spec info(Socket) -> socket_info() when
Socket :: socket().
info(#socket{ref = SockRef}) ->
nif_info(SockRef).
%% ===========================================================================
%%
%% supports - get information about what the platform "supports".
%%
%% Generates a list of various info about what the plaform can support.
%% The most obvious case is 'options'.
%%
%% Each item in a 'supports'-list will appear only *one* time.
%%
%% ===========================================================================
-type supports_options_socket() :: [{socket_option(), boolean()}].
-type supports_options_ip() :: [{ip_socket_option(), boolean()}].
-type supports_options_ipv6() :: [{ipv6_socket_option(), boolean()}].
-type supports_options_tcp() :: [{tcp_socket_option(), boolean()}].
-type supports_options_udp() :: [{udp_socket_option(), boolean()}].
-type supports_options_sctp() :: [{sctp_socket_option(), boolean()}].
-type supports_options() :: [{socket, supports_options_socket()} |
{ip, supports_options_ip()} |
{ipv6, supports_options_ipv6()} |
{tcp, supports_options_tcp()} |
{udp, supports_options_udp()} |
{sctp, supports_options_sctp()}].
-spec supports() -> [{options, supports_options()} |
{sctp, boolean()} |
{ipv6, boolean()} |
{local, boolean()}].
supports() ->
[{options, supports(options)},
{sctp, supports(sctp)},
{ipv6, supports(ipv6)},
{local, supports(local)}].
-dialyzer({nowarn_function, supports/1}).
-spec supports(options) -> supports_options();
(sctp) -> boolean();
(ipv6) -> boolean();
(local) -> boolean();
(Key1) -> false when
Key1 :: term().
supports(options) ->
nif_supports(?SOCKET_SUPPORTS_OPTIONS);
supports(sctp) ->
nif_supports(?SOCKET_SUPPORTS_SCTP);
supports(ipv6) ->
nif_supports(?SOCKET_SUPPORTS_IPV6);
supports(local) ->
nif_supports(?SOCKET_SUPPORTS_LOCAL);
supports(_Key1) ->
false.
-dialyzer({nowarn_function, supports/2}).
-spec supports(options, socket) -> supports_options_socket();
(options, ip) -> supports_options_ip();
(options, ipv6) -> supports_options_ipv6();
(options, tcp) -> supports_options_tcp();
(options, udp) -> supports_options_udp();
(options, sctp) -> supports_options_sctp();
(Key1, Key2) -> false when
Key1 :: term(),
Key2 :: term().
supports(options, Level) ->
proplists:get_value(Level, supports(options), false);
supports(_Key1, _Level) ->
false.
-dialyzer({nowarn_function, supports/3}).
-spec supports(options, socket, Opt) -> boolean() when
Opt :: socket_option();
(options, ip, Opt) -> boolean() when
Opt :: ip_socket_option();
(options, ipv6, Opt) -> boolean() when
Opt :: ipv6_socket_option();
(options, tcp, Opt) -> boolean() when
Opt :: tcp_socket_option();
(options, udp, Opt) -> boolean() when
Opt :: udp_socket_option();
(options, sctp, Opt) -> boolean() when
Opt :: sctp_socket_option();
(Key1, Key2, Key3) -> false when
Key1 :: term(),
Key2 :: term(),
Key3 :: term().
supports(options, Level, Opt) ->
case supports(options, Level) of
S when is_list(S) ->
proplists:get_value(Opt, S, false);
_ ->
false
end;
supports(_Key1, _Key2, _Key3) ->
false.
%% ===========================================================================
%%
%% The proper socket API
%%
%% ===========================================================================
%% ===========================================================================
%%
%%
%%
%% How do we handle the case when an fd has been created (somehow)
%% and we shall create a socket "from it".
%% Can we figure out Domain, Type and Protocol from fd?
%% No we can't: For instance, its not possible to 'get' domain on FreeBSD.
%%
%% Instead, require: open(Domain, Stream, Proto, #{fd => FD}).
%% The last argument, Extra, is used to provide the fd.
%%
%%
%%
%%
%%
%%
%% Possibly add a "registry" in the nif, allowing the user processes to
%% "register" themselves.
%% The point of this would be to ensure that these processes are
%% informed if the socket "terminates". Could possibly be used for
%% other things? If gen_tcp implements the active feature using
%% a reader process, the nif may need to know about this process,
%% since its probably "hidden" from the socket "owner" (someone
%% needs to handle it if it dies).
%% Register under a name?
%%
%% The nif sets up a monitor to this process, and if it dies the socket
%% is closed. It is also used if someone wants to monitor the socket.
%%
%% We may therefor need monitor function(s):
%%
%% socket:monitor(Socket)
%% socket:demonitor(Socket)
%%
%%
%%
%% ===========================================================================
%%
%% open - create an endpoint for communication
%%
%% Extra: Currently only used for netns
%%
-spec open(Domain, Type) -> {ok, Socket} | {error, Reason} when
Domain :: domain(),
Type :: type(),
Socket :: socket(),
Reason :: term().
open(Domain, Type) ->
open(Domain, Type, default).
-spec open(Domain, Type, Protocol) -> {ok, Socket} | {error, Reason} when
Domain :: domain(),
Type :: type(),
Protocol :: default | protocol(),
Socket :: socket(),
Reason :: term().
open(Domain, Type, Protocol) ->
open(Domain, Type, Protocol, #{}).
-spec open(Domain, Type, Protocol, Extra) -> {ok, Socket} | {error, Reason} when
Domain :: domain(),
Type :: type(),
Protocol :: default | protocol(),
Extra :: map(),
Socket :: socket(),
Reason :: term().
open(Domain, Type, Protocol, Extra) when is_map(Extra) ->
try
begin
EDomain = enc_domain(Domain),
EType = enc_type(Domain, Type),
EProtocol = enc_protocol(Type, Protocol),
case nif_open(EDomain, EType, EProtocol, Extra) of
{ok, SockRef} ->
Socket = #socket{ref = SockRef},
{ok, Socket};
{error, _} = ERROR ->
ERROR
end
end
catch
throw:T ->
T;
%%
error:notsup:S ->
erlang:raise(error, notsup, S);
%%
error:Reason ->
{error, Reason}
end.
%% ===========================================================================
%%
%% bind - bind a name to a socket
%%
%% Note that Addr can only have the value of broadcast *if* Domain =:= inet!
%%
-spec bind(Socket, Addr) -> ok | {error, Reason} when
Socket :: socket(),
Addr :: any | broadcast | loopback | sockaddr(),
Reason :: term().
bind(#socket{ref = SockRef}, Addr)
when ((Addr =:= any) orelse
(Addr =:= broadcast) orelse
(Addr =:= loopback)) ->
try which_domain(SockRef) of
inet ->
nif_bind(SockRef, ?SOCKADDR_IN4_DEFAULT(Addr));
inet6 when (Addr =:= any) orelse (Addr =:= loopback) ->
nif_bind(SockRef, ?SOCKADDR_IN6_DEFAULT(Addr));
_ ->
einval()
catch
%%
error:notsup:S ->
erlang:raise(error, notsup, S);
%%
throw:ERROR ->
ERROR
end;
bind(#socket{ref = SockRef} = _Socket, Addr) when is_map(Addr) ->
try
begin
nif_bind(SockRef, ensure_sockaddr(Addr))
end
catch
%%
error:notsup:S ->
erlang:raise(error, notsup, S);
%%
throw:ERROR ->
ERROR
end.
%% ===========================================================================
%%
%% bind - Add or remove a bind addresses on a socket
%%
%% Calling this function is only valid if the socket is:
%% type = seqpacket
%% protocol = sctp
%%
%% If the domain is inet, then all addresses *must* be IPv4.
%% If the domain is inet6, the addresses can be aither IPv4 or IPv6.
%%
-spec bind(Socket, Addrs, Action) -> ok | {error, Reason} when
Socket :: socket(),
Addrs :: [sockaddr()],
Action :: add | remove,
Reason :: term().
bind(#socket{ref = SockRef}, Addrs, Action)
when is_list(Addrs) andalso ((Action =:= add) orelse (Action =:= remove)) ->
try
begin
ensure_type(SockRef, seqpacket),
ensure_proto(SockRef, sctp),
validate_addrs(which_domain(SockRef), Addrs),
nif_bind(SockRef, Addrs, Action)
end
catch
%%
error:notsup:S ->
erlang:raise(error, notsup, S);
%%
throw:ERROR ->
ERROR
end.
ensure_type(SockRef, Type) ->
case which_type(SockRef) of
Type ->
ok;
_InvalidType ->
einval()
end.
ensure_proto(SockRef, Proto) ->
case which_protocol(SockRef) of
Proto ->
ok;
_InvalidProto ->
einval()
end.
validate_addrs(inet = _Domain, Addrs) ->
validate_inet_addrs(Addrs);
validate_addrs(inet6 = _Domain, Addrs) ->
validate_inet6_addrs(Addrs).
validate_inet_addrs(Addrs) ->
Validator = fun(#{family := inet,
addrs := Addr}) when is_tuple(Addr) andalso
(size(Addr) =:= 4) ->
ok;
(X) ->
throw({error, {invalid_address, X}})
end,
lists:foreach(Validator, Addrs).
validate_inet6_addrs(Addrs) ->
Validator = fun(#{family := inet,
addrs := Addr}) when is_tuple(Addr) andalso
(size(Addr) =:= 4) ->
ok;
(#{family := inet6,
addrs := Addr}) when is_tuple(Addr) andalso
(size(Addr) =:= 8) ->
ok;
(X) ->
throw({error, {invalid_address, X}})
end,
lists:foreach(Validator, Addrs).
%% ===========================================================================
%%
%% connect - initiate a connection on a socket
%%
-spec connect(Socket, SockAddr) -> ok | {error, Reason} when
Socket :: socket(),
SockAddr :: sockaddr(),
Reason :: term().
connect(Socket, SockAddr) ->
connect(Socket, SockAddr, infinity).
-spec connect(Socket, SockAddr, nowait) ->
ok | {select, SelectInfo} | {error, Reason} when
Socket :: socket(),
SockAddr :: sockaddr(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, SockAddr, Timeout) -> ok | {error, Reason} when
Socket :: socket(),
SockAddr :: sockaddr(),
Timeout :: timeout(),
Reason :: term().
%%
%% Is it possible to connect with family = local for the (dest) sockaddr?
%%
connect(_Socket, _SockAddr, Timeout)
when (is_integer(Timeout) andalso (Timeout =< 0)) ->
{error, timeout};
connect(#socket{ref = SockRef}, #{family := Fam} = SockAddr, Timeout)
when ((Fam =:= inet) orelse (Fam =:= inet6) orelse (Fam =:= local)) andalso
((Timeout =:= nowait) orelse
(Timeout =:= infinity) orelse is_integer(Timeout)) ->
TS = timestamp(Timeout),
case nif_connect(SockRef, ensure_sockaddr(SockAddr)) of
ok ->
%% Connected!
ok;
{ok, Ref} when (Timeout =:= nowait) ->
%% Connecting, but the caller does not want to wait...
?SELECT(connect, Ref);
{ok, Ref} ->
%% Connecting...
NewTimeout = next_timeout(TS, Timeout),
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, Ref} ->
nif_finalize_connection(SockRef)
after NewTimeout ->
cancel(SockRef, connect, Ref),
{error, timeout}
end;
{error, _} = ERROR ->
ERROR
end.
%% ===========================================================================
%%
%% listen - listen for connections on a socket
%%
-spec listen(Socket) -> ok | {error, Reason} when
Socket :: socket(),
Reason :: term().
listen(Socket) ->
listen(Socket, ?SOCKET_LISTEN_BACKLOG_DEFAULT).
-spec listen(Socket, Backlog) -> ok | {error, Reason} when
Socket :: socket(),
Backlog :: pos_integer(),
Reason :: term().
listen(#socket{ref = SockRef}, Backlog)
when (is_integer(Backlog) andalso (Backlog >= 0)) ->
nif_listen(SockRef, Backlog).
%% ===========================================================================
%%
%% accept, accept4 - accept a connection on a socket
%%
-spec accept(LSocket) -> {ok, Socket} | {error, Reason} when
LSocket :: socket(),
Socket :: socket(),
Reason :: term().
accept(Socket) ->
accept(Socket, ?SOCKET_ACCEPT_TIMEOUT_DEFAULT).
-spec accept(LSocket, nowait) ->
{ok, Socket} |
{select, SelectInfo} |
{error, Reason} when
LSocket :: socket(),
Socket :: socket(),
SelectInfo :: select_info(),
Reason :: term()
; (LSocket, Timeout) -> {ok, Socket} | {error, Reason} when
LSocket :: socket(),
Timeout :: timeout(),
Socket :: socket(),
Reason :: term().
%% Do we really need this optimization?
accept(_, Timeout) when is_integer(Timeout) andalso (Timeout =< 0) ->
{error, timeout};
accept(#socket{ref = LSockRef}, Timeout)
when is_integer(Timeout) orelse
(Timeout =:= infinity) orelse
(Timeout =:= nowait) ->
do_accept(LSockRef, Timeout).
do_accept(LSockRef, Timeout) ->
TS = timestamp(Timeout),
AccRef = make_ref(),
case nif_accept(LSockRef, AccRef) of
{ok, SockRef} ->
Socket = #socket{ref = SockRef},
{ok, Socket};
{error, eagain} when (Timeout =:= nowait) ->
?SELECT(accept, AccRef);
{error, eagain} ->
%% Each call is non-blocking, but even then it takes
%% *some* time, so just to be sure, recalculate before
%% the receive.
NewTimeout = next_timeout(TS, Timeout),
receive
{?SOCKET_TAG, #socket{ref = LSockRef}, select, AccRef} ->
do_accept(LSockRef, next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {AccRef, Reason}} ->
{error, Reason}
after NewTimeout ->
cancel(LSockRef, accept, AccRef),
{error, timeout}
end;
{error, _} = ERROR ->
cancel(LSockRef, accept, AccRef), % Just to be on the safe side...
ERROR
end.
%% ===========================================================================
%%
%% send, sendto, sendmsg - send a message on a socket
%%
-spec send(Socket, Data) -> ok | {error, Reason} when
Socket :: socket(),
Data :: iodata(),
Reason :: term().
send(Socket, Data) ->
send(Socket, Data, ?SOCKET_SEND_FLAGS_DEFAULT, ?SOCKET_SEND_TIMEOUT_DEFAULT).
-spec send(Socket, Data, Flags) -> ok | {error, Reason} when
Socket :: socket(),
Data :: iodata(),
Flags :: send_flags(),
Reason :: term()
; (Socket, Data, Timeout :: nowait) -> ok |
{select, SelectInfo} |
{ok, {RestData, SelectInfo}} |
{error, Reason} when
Socket :: socket(),
Data :: iodata(),
RestData :: binary(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, Data, Timeout) -> ok | {error, Reason} when
Socket :: socket(),
Data :: iodata(),
Timeout :: timeout(),
Reason :: term().
send(Socket, Data, Flags) when is_list(Flags) ->
send(Socket, Data, Flags, ?SOCKET_SEND_TIMEOUT_DEFAULT);
send(Socket, Data, Timeout) ->
send(Socket, Data, ?SOCKET_SEND_FLAGS_DEFAULT, Timeout).
-spec send(Socket, Data, Flags, nowait) -> ok |
{select, SelectInfo} |
{ok, {RestData, SelectInfo}} |
{error, Reason} when
Socket :: socket(),
Data :: iodata(),
Flags :: send_flags(),
RestData :: binary(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, Data, Flags, Timeout) -> ok | {error, Reason} when
Socket :: socket(),
Data :: iodata(),
Flags :: send_flags(),
Timeout :: timeout(),
Reason :: term().
send(Socket, Data, Flags, Timeout) when is_list(Data) ->
Bin = erlang:list_to_binary(Data),
send(Socket, Bin, Flags, Timeout);
send(#socket{ref = SockRef}, Data, Flags, Timeout)
when is_binary(Data) andalso
is_list(Flags) andalso
((Timeout =:= nowait) orelse
(Timeout =:= infinity) orelse
(is_integer(Timeout) andalso (Timeout > 0))) ->
EFlags = enc_send_flags(Flags),
do_send(SockRef, Data, EFlags, Timeout).
do_send(SockRef, Data, EFlags, Timeout) ->
TS = timestamp(Timeout),
SendRef = make_ref(),
case nif_send(SockRef, SendRef, Data, EFlags) of
ok ->
ok;
{ok, Written} when (Timeout =:= nowait) ->
<<_:Written/binary, Rest/binary>> = Data,
%% We are partially done, but the user don't want to wait (here)
%% for completion
{ok, {Rest, ?SELECT_INFO(send, SendRef)}};
{ok, Written} ->
NewTimeout = next_timeout(TS, Timeout),
%% We are partially done, wait for continuation
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, SendRef}
when (Written > 0) ->
<<_:Written/binary, Rest/binary>> = Data,
do_send(SockRef, Rest, EFlags,
next_timeout(TS, Timeout));
{?SOCKET_TAG, #socket{ref = SockRef}, select, SendRef} ->
do_send(SockRef, Data, EFlags,
next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {SendRef, Reason}} ->
{error, Reason}
after NewTimeout ->
cancel(SockRef, send, SendRef),
{error, {timeout, size(Data)}}
end;
{error, eagain} when (Timeout =:= nowait) ->
?SELECT(send, SendRef);
{error, eagain} ->
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, SendRef} ->
do_send(SockRef, Data, EFlags,
next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {SendRef, Reason}} ->
{error, Reason}
after Timeout ->
cancel(SockRef, send, SendRef),
{error, {timeout, size(Data)}}
end;
{error, _} = ERROR ->
ERROR
end.
%% ---------------------------------------------------------------------------
%%
-spec sendto(Socket, Data, Dest) ->
ok | {error, Reason} when
Socket :: socket(),
Data :: binary(),
Dest :: sockaddr(),
Reason :: term().
sendto(Socket, Data, Dest) ->
sendto(Socket, Data, Dest, ?SOCKET_SENDTO_FLAGS_DEFAULT).
-spec sendto(Socket, Data, Dest, Flags) -> ok | {error, Reason} when
Socket :: socket(),
Data :: binary(),
Dest :: sockaddr(),
Flags :: send_flags(),
Reason :: term()
; (Socket, Data, Dest, Timeout :: nowait) -> ok |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
Data :: iodata(),
Dest :: sockaddr(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, Data, Dest, Timeout) -> ok | {error, Reason} when
Socket :: socket(),
Data :: iodata(),
Dest :: sockaddr(),
Timeout :: timeout(),
Reason :: term().
sendto(Socket, Data, Dest, Flags) when is_list(Flags) ->
sendto(Socket, Data, Dest, Flags, ?SOCKET_SENDTO_TIMEOUT_DEFAULT);
sendto(Socket, Data, Dest, Timeout) ->
sendto(Socket, Data, Dest, ?SOCKET_SENDTO_FLAGS_DEFAULT, Timeout).
-spec sendto(Socket, Data, Dest, Flags, nowait) -> ok |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
Data :: binary(),
Dest :: sockaddr(),
Flags :: send_flags(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, Data, Dest, Flags, Timeout) -> ok | {error, Reason} when
Socket :: socket(),
Data :: binary(),
Dest :: sockaddr(),
Flags :: send_flags(),
Timeout :: timeout(),
Reason :: term().
sendto(Socket, Data, Dest, Flags, Timeout) when is_list(Data) ->
Bin = erlang:list_to_binary(Data),
sendto(Socket, Bin, Dest, Flags, Timeout);
sendto(#socket{ref = SockRef}, Data, #{family := Fam} = Dest, Flags, Timeout)
when is_binary(Data) andalso
((Fam =:= inet) orelse (Fam =:= inet6) orelse (Fam =:= local)) andalso
is_list(Flags) andalso
((Timeout =:= nowait) orelse
(Timeout =:= infinity) orelse
(is_integer(Timeout) andalso (Timeout > 0))) ->
EFlags = enc_send_flags(Flags),
do_sendto(SockRef, Data, ensure_sockaddr(Dest), EFlags, Timeout).
do_sendto(SockRef, Data, Dest, EFlags, Timeout) ->
TS = timestamp(Timeout),
SendRef = make_ref(),
case nif_sendto(SockRef, SendRef, Data, Dest, EFlags) of
ok ->
%% We are done
ok;
{ok, Written} when (Timeout =:= nowait) ->
<<_:Written/binary, Rest/binary>> = Data,
{ok, {Rest, ?SELECT_INFO(sendto, SendRef)}};
{ok, Written} ->
%% We are partially done, wait for continuation
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, SendRef}
when (Written > 0) ->
<<_:Written/binary, Rest/binary>> = Data,
do_sendto(SockRef, Rest, Dest, EFlags,
next_timeout(TS, Timeout));
{?SOCKET_TAG, #socket{ref = SockRef}, select, SendRef} ->
do_sendto(SockRef, Data, Dest, EFlags,
next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {SendRef, Reason}} ->
{error, Reason}
after Timeout ->
cancel(SockRef, sendto, SendRef),
{error, timeout}
end;
{error, eagain} when (Timeout =:= nowait) ->
?SELECT(sendto, SendRef);
{error, eagain} ->
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, SendRef} ->
do_sendto(SockRef, Data, Dest, EFlags,
next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {SendRef, Reason}} ->
{error, Reason}
after Timeout ->
cancel(SockRef, sendto, SendRef),
{error, timeout}
end;
{error, _} = ERROR ->
ERROR
end.
%% ---------------------------------------------------------------------------
%%
%% The only part of the msghdr() that *must* exist (a connected
%% socket need not specify the addr field) is the iov.
%% The ctrl field is optional, and the addr and flags are not
%% used when sending.
%%
-spec sendmsg(Socket, MsgHdr) -> ok | {error, Reason} when
Socket :: socket(),
MsgHdr :: msghdr(),
Reason :: term().
sendmsg(Socket, MsgHdr) ->
sendmsg(Socket, MsgHdr,
?SOCKET_SENDMSG_FLAGS_DEFAULT, ?SOCKET_SENDMSG_TIMEOUT_DEFAULT).
-spec sendmsg(Socket, MsgHdr, Flags) -> ok | {error, Reason} when
Socket :: socket(),
MsgHdr :: msghdr(),
Flags :: send_flags(),
Reason :: term()
; (Socket, MsgHdr, Timeout :: nowait) -> ok |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
MsgHdr :: msghdr(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, MsgHdr, Timeout) -> ok | {error, Reason} when
Socket :: socket(),
MsgHdr :: msghdr(),
Timeout :: timeout(),
Reason :: term().
sendmsg(Socket, MsgHdr, Flags) when is_list(Flags) ->
sendmsg(Socket, MsgHdr, Flags, ?SOCKET_SENDMSG_TIMEOUT_DEFAULT);
sendmsg(Socket, MsgHdr, Timeout)
when is_integer(Timeout) orelse (Timeout =:= infinity) ->
sendmsg(Socket, MsgHdr, ?SOCKET_SENDMSG_FLAGS_DEFAULT, Timeout).
-spec sendmsg(Socket, MsgHdr, Flags, nowait) ->
ok |
{ok, Remaining} |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
MsgHdr :: msghdr(),
Flags :: send_flags(),
Remaining :: erlang:iovec(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, MsgHdr, Flags, Timeout) ->
ok |
{ok, Remaining} |
{error, Reason} when
Socket :: socket(),
MsgHdr :: msghdr(),
Flags :: send_flags(),
Timeout :: timeout(),
Remaining :: erlang:iovec(),
Reason :: term().
sendmsg(#socket{ref = SockRef}, #{iov := IOV} = MsgHdr, Flags, Timeout)
when is_list(IOV) andalso
is_list(Flags) andalso
((Timeout =:= nowait) orelse
(Timeout =:= infinity) orelse
(is_integer(Timeout) andalso (Timeout > 0))) ->
try ensure_msghdr(MsgHdr) of
M ->
EFlags = enc_send_flags(Flags),
do_sendmsg(SockRef, M, EFlags, Timeout)
catch
throw:T ->
T;
error:Reason ->
{error, Reason}
end.
do_sendmsg(SockRef, MsgHdr, EFlags, Timeout) ->
TS = timestamp(Timeout),
SendRef = make_ref(),
case nif_sendmsg(SockRef, SendRef, MsgHdr, EFlags) of
ok ->
%% We are done
ok;
{ok, Written} when is_integer(Written) andalso (Written > 0) ->
%% We should not retry here since the protocol may not
%% be able to handle a message being split. Leave it to
%% the caller to figure out (call again with the rest).
%%
%% We should really not need to cancel, since this is
%% accepted for sendmsg!
%%
cancel(SockRef, sendmsg, SendRef),
{ok, do_sendmsg_rest(maps:get(iov, MsgHdr), Written)};
{error, eagain} when (Timeout =:= nowait) ->
?SELECT(sendmsg, SendRef);
{error, eagain} ->
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, SendRef} ->
do_sendmsg(SockRef, MsgHdr, EFlags,
next_timeout(TS, Timeout))
after Timeout ->
cancel(SockRef, sendmsg, SendRef),
{error, timeout}
end;
{error, _} = ERROR ->
ERROR
end.
do_sendmsg_rest([B|IOVec], Written) when (Written >= size(B)) ->
do_sendmsg_rest(IOVec, Written - size(B));
do_sendmsg_rest([B|IOVec], Written) ->
<<_:Written/binary, Rest/binary>> = B,
[Rest|IOVec].
ensure_msghdr(#{ctrl := []} = M) ->
ensure_msghdr(maps:remove(ctrl, M));
ensure_msghdr(#{iov := IOV, addr := Addr} = M)
when is_list(IOV) andalso (IOV =/= []) ->
M#{iov => erlang:iolist_to_iovec(IOV), addr => ensure_sockaddr(Addr)};
ensure_msghdr(#{iov := IOV} = M)
when is_list(IOV) andalso (IOV =/= []) ->
M#{iov => erlang:iolist_to_iovec(IOV)};
ensure_msghdr(_) ->
einval().
%% ===========================================================================
%%
%% recv, recvfrom, recvmsg - receive a message from a socket
%%
%% Description:
%% There is a special case for the argument Length. If its set to zero (0),
%% it means "give me everything you have".
%%
%% Returns: {ok, Binary} | {error, Reason}
%% Binary - The received data as a binary
%% Reason - The error reason:
%% timeout | {timeout, AccData} |
%% posix() | {posix(), AccData} |
%% atom() | {atom(), AccData}
%% AccData - The data (as a binary) that we did manage to receive
%% before the timeout.
%%
%% Arguments:
%% Socket - The socket to read from.
%% Length - The number of bytes to read.
%% Flags - A list of "options" for the read.
%% Timeout - Time-out in milliseconds.
-spec recv(Socket) -> {ok, Data} | {error, Reason} when
Socket :: socket(),
Data :: binary(),
Reason :: term().
recv(Socket) ->
recv(Socket, 0).
-spec recv(Socket, Length) -> {ok, Data} | {error, Reason} when
Socket :: socket(),
Length :: non_neg_integer(),
Data :: binary(),
Reason :: term().
recv(Socket, Length) ->
recv(Socket, Length,
?SOCKET_RECV_FLAGS_DEFAULT,
?SOCKET_RECV_TIMEOUT_DEFAULT).
-spec recv(Socket, Length, Flags) -> {ok, Data} |
{error, Reason} when
Socket :: socket(),
Length :: non_neg_integer(),
Flags :: recv_flags(),
Data :: binary(),
Reason :: term()
; (Socket, Length, Timeout :: nowait) -> {ok, Data} |
{select, SelectInfo} |
{ok, {Data, SelectInfo}} |
{error, Reason} when
Socket :: socket(),
Length :: non_neg_integer(),
Data :: binary(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, Length, Timeout) -> {ok, Data} |
{error, Reason} when
Socket :: socket(),
Length :: non_neg_integer(),
Timeout :: timeout(),
Data :: binary(),
Reason :: term().
recv(Socket, Length, Flags) when is_list(Flags) ->
recv(Socket, Length, Flags, ?SOCKET_RECV_TIMEOUT_DEFAULT);
recv(Socket, Length, Timeout) ->
recv(Socket, Length, ?SOCKET_RECV_FLAGS_DEFAULT, Timeout).
-spec recv(Socket, Length, Flags, nowait) -> {ok, Data} |
{select, SelectInfo} |
{ok, {Data, SelectInfo}} |
{error, Reason} when
Socket :: socket(),
Length :: non_neg_integer(),
Flags :: recv_flags(),
Data :: binary(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, Length, Flags, Timeout) -> {ok, Data} |
{error, Reason} when
Socket :: socket(),
Length :: non_neg_integer(),
Flags :: recv_flags(),
Timeout :: timeout(),
Data :: binary(),
Reason :: term().
recv(#socket{ref = SockRef}, Length, Flags, Timeout)
when (is_integer(Length) andalso (Length >= 0)) andalso
is_list(Flags) andalso
(is_integer(Timeout) orelse
(Timeout =:= infinity) orelse
(Timeout =:= nowait)) ->
EFlags = enc_recv_flags(Flags),
do_recv(SockRef, undefined, Length, EFlags, <<>>, Timeout).
%% We need to pass the "old recv ref" around because of the special case
%% with Length = 0. This case makes it neccessary to have a timeout function
%% clause since we may never wait for anything (no receive select), and so the
%% the only timeout check will be the function clause.
%% Note that the Timeout value of 'nowait' has a special meaning. It means
%% that we will either return with data or with the with {error, NNNN}. In
%% wich case the caller will receive a select message at some later time.
do_recv(SockRef, _OldRef, Length, EFlags, Acc, Timeout)
when (Timeout =:= nowait) orelse
(Timeout =:= infinity) orelse
(is_integer(Timeout) andalso (Timeout > 0)) ->
TS = timestamp(Timeout),
RecvRef = make_ref(),
case nif_recv(SockRef, RecvRef, Length, EFlags) of
{ok, true = _Complete, Bin} when (size(Acc) =:= 0) ->
{ok, Bin};
{ok, true = _Complete, Bin} ->
{ok, <>};
%% It depends on the amount of bytes we tried to read:
%% 0 - Read everything available
%% We got something, but there may be more - keep reading.
%% > 0 - We got a part of the message and we will be notified
%% when there is more to read (a select message)
{ok, false = _Complete, Bin} when (Length =:= 0) ->
do_recv(SockRef, RecvRef,
Length, EFlags,
<>,
next_timeout(TS, Timeout));
%% Did not get all the user asked for, but the user also
%% specified 'nowait', so deliver what we got and the
%% select info.
{ok, false = _Completed, Bin} when (Timeout =:= nowait) andalso
(size(Acc) =:= 0) ->
{ok, {Bin, ?SELECT_INFO(recv, RecvRef)}};
{ok, false = _Completed, Bin} when (size(Acc) =:= 0) ->
%% We got the first chunk of it.
%% We will be notified (select message) when there
%% is more to read.
NewTimeout = next_timeout(TS, Timeout),
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, RecvRef} ->
do_recv(SockRef, RecvRef,
Length-size(Bin), EFlags,
Bin,
next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {RecvRef, Reason}} ->
{error, Reason}
after NewTimeout ->
cancel(SockRef, recv, RecvRef),
{error, {timeout, Acc}}
end;
{ok, false = _Completed, Bin} ->
%% We got a chunk of it!
NewTimeout = next_timeout(TS, Timeout),
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, RecvRef} ->
do_recv(SockRef, RecvRef,
Length-size(Bin), EFlags,
<>,
next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {RecvRef, Reason}} ->
{error, Reason}
after NewTimeout ->
cancel(SockRef, recv, RecvRef),
{error, {timeout, Acc}}
end;
%% The user does not want to wait!
%% The user will be informed that there is something to read
%% via the select socket message (see below).
{error, eagain} when (Timeout =:= nowait) andalso (size(Acc) =:= 0) ->
?SELECT(recv, RecvRef);
{error, eagain} when (Timeout =:= nowait) ->
{ok, {Acc, ?SELECT_INFO(recv, RecvRef)}};
%% We return with the accumulated binary (if its non-empty)
{error, eagain} when (Length =:= 0) andalso (size(Acc) > 0) ->
%% CAN WE REALLY DO THIS? THE NIF HAS SELECTED!! OR?
{ok, Acc};
{error, eagain} ->
%% There is nothing just now, but we will be notified when there
%% is something to read (a select message).
NewTimeout = next_timeout(TS, Timeout),
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, RecvRef} ->
do_recv(SockRef, RecvRef,
Length, EFlags,
Acc,
next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {RecvRef, Reason}} ->
{error, Reason}
after NewTimeout ->
cancel(SockRef, recv, RecvRef),
{error, timeout}
end;
{error, closed = Reason} ->
do_close(SockRef),
if
(size(Acc) =:= 0) ->
{error, Reason};
true ->
{error, {Reason, Acc}}
end;
{error, _} = ERROR when (size(Acc) =:= 0) ->
ERROR;
{error, Reason} ->
{error, {Reason, Acc}}
end;
do_recv(SockRef, RecvRef, 0 = _Length, _Eflags, Acc, _Timeout) ->
%% The current recv operation is to be cancelled, so no need for a ref...
%% The cancel will end our 'read everything you have' and "activate"
%% any waiting reader.
cancel(SockRef, recv, RecvRef),
{ok, Acc};
do_recv(_SockRef, _RecvRef, _Length, _EFlags, Acc, _Timeout)
when (size(Acc) > 0) ->
{error, {timeout, Acc}};
do_recv(_SockRef, _RecvRef, _Length, _EFlags, _Acc, _Timeout) ->
{error, timeout}.
%% ---------------------------------------------------------------------------
%%
%% With recvfrom we get messages, which means that regardless of how
%% much we want to read, we return when we get a message.
%% The MaxSize argument basically defines the size of our receive
%% buffer. By setting the size to zero (0), we use the configured
%% size (see setopt).
%% It may be impossible to know what (buffer) size is appropriate
%% "in advance", and in those cases it may be convenient to use the
%% (recv) 'peek' flag. When this flag is provided the message is *not*
%% "consumed" from the underlying (OS) buffers, so another recvfrom call
%% is needed, possibly with a then adjusted buffer size.
%%
-spec recvfrom(Socket) -> {ok, {Source, Data}} | {error, Reason} when
Socket :: socket(),
Source :: sockaddr() | undefined,
Data :: binary(),
Reason :: term().
recvfrom(Socket) ->
recvfrom(Socket, 0).
-spec recvfrom(Socket, BufSz) -> {ok, {Source, Data}} | {error, Reason} when
Socket :: socket(),
BufSz :: non_neg_integer(),
Source :: sockaddr() | undefined,
Data :: binary(),
Reason :: term().
recvfrom(Socket, BufSz) ->
recvfrom(Socket, BufSz,
?SOCKET_RECV_FLAGS_DEFAULT,
?SOCKET_RECV_TIMEOUT_DEFAULT).
-spec recvfrom(Socket, Flags, nowait) ->
{ok, {Source, Data}} |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
Flags :: recv_flags(),
Source :: sockaddr() | undefined,
Data :: binary(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, Flags, Timeout) ->
{ok, {Source, Data}} |
{error, Reason} when
Socket :: socket(),
Flags :: recv_flags(),
Timeout :: timeout(),
Source :: sockaddr() | undefined,
Data :: binary(),
Reason :: term()
; (Socket, BufSz, Flags) ->
{ok, {Source, Data}} | {error, Reason} when
Socket :: socket(),
BufSz :: non_neg_integer(),
Flags :: recv_flags(),
Source :: sockaddr() | undefined,
Data :: binary(),
Reason :: term()
; (Socket, BufSz, nowait) ->
{ok, {Source, Data}} |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
BufSz :: non_neg_integer(),
Source :: sockaddr() | undefined,
Data :: binary(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, BufSz, Timeout) ->
{ok, {Source, Data}} | {error, Reason} when
Socket :: socket(),
BufSz :: non_neg_integer(),
Timeout :: timeout(),
Source :: sockaddr() | undefined,
Data :: binary(),
Reason :: term().
recvfrom(Socket, Flags, Timeout) when is_list(Flags) ->
recvfrom(Socket, 0, Flags, Timeout);
recvfrom(Socket, BufSz, Flags) when is_list(Flags) ->
recvfrom(Socket, BufSz, Flags, ?SOCKET_RECV_TIMEOUT_DEFAULT);
recvfrom(Socket, BufSz, Timeout) ->
recvfrom(Socket, BufSz, ?SOCKET_RECV_FLAGS_DEFAULT, Timeout).
-spec recvfrom(Socket, BufSz, Flags, nowait) ->
{ok, {Source, Data}} |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
BufSz :: non_neg_integer(),
Flags :: recv_flags(),
Source :: sockaddr() | undefined,
Data :: binary(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, BufSz, Flags, Timeout) ->
{ok, {Source, Data}} |
{error, Reason} when
Socket :: socket(),
BufSz :: non_neg_integer(),
Flags :: recv_flags(),
Timeout :: timeout(),
Source :: sockaddr() | undefined,
Data :: binary(),
Reason :: term().
recvfrom(#socket{ref = SockRef}, BufSz, Flags, Timeout)
when (is_integer(BufSz) andalso (BufSz >= 0)) andalso
is_list(Flags) andalso
(is_integer(Timeout) orelse
(Timeout =:= infinity) orelse
(Timeout =:= nowait)) ->
EFlags = enc_recv_flags(Flags),
do_recvfrom(SockRef, BufSz, EFlags, Timeout).
do_recvfrom(SockRef, BufSz, EFlags, Timeout) ->
TS = timestamp(Timeout),
RecvRef = make_ref(),
case nif_recvfrom(SockRef, RecvRef, BufSz, EFlags) of
{ok, {_Source, _NewData}} = OK ->
OK;
{error, eagain} when (Timeout =:= nowait) ->
?SELECT(recvfrom, RecvRef);
{error, eagain} ->
%% There is nothing just now, but we will be notified when there
%% is something to read (a select message).
NewTimeout = next_timeout(TS, Timeout),
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, RecvRef} ->
do_recvfrom(SockRef, BufSz, EFlags,
next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {RecvRef, Reason}} ->
{error, Reason}
after NewTimeout ->
cancel(SockRef, recvfrom, RecvRef),
{error, timeout}
end;
{error, _Reason} = ERROR ->
ERROR
end.
%% ---------------------------------------------------------------------------
%%
-spec recvmsg(Socket) -> {ok, MsgHdr} | {error, Reason} when
Socket :: socket(),
MsgHdr :: msghdr(),
Reason :: term().
recvmsg(Socket) ->
recvmsg(Socket, 0, 0,
?SOCKET_RECV_FLAGS_DEFAULT, ?SOCKET_RECV_TIMEOUT_DEFAULT).
-spec recvmsg(Socket, Flags) -> {ok, MsgHdr} | {error, Reason} when
Socket :: socket(),
Flags :: recv_flags(),
MsgHdr :: msghdr(),
Reason :: term()
; (Socket, Timeout :: nowait) -> {ok, MsgHdr} |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
MsgHdr :: msghdr(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, Timeout) -> {ok, MsgHdr} | {error, Reason} when
Socket :: socket(),
Timeout :: timeout(),
MsgHdr :: msghdr(),
Reason :: term().
recvmsg(Socket, Flags) when is_list(Flags) ->
recvmsg(Socket, 0, 0, Flags, ?SOCKET_RECV_TIMEOUT_DEFAULT);
recvmsg(Socket, Timeout) ->
recvmsg(Socket, 0, 0, ?SOCKET_RECV_FLAGS_DEFAULT, Timeout).
-spec recvmsg(Socket, Flags, nowait) -> {ok, MsgHdr} |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
Flags :: recv_flags(),
MsgHdr :: msghdr(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket, Flags, Timeout) -> {ok, MsgHdr} | {error, Reason} when
Socket :: socket(),
Flags :: recv_flags(),
Timeout :: timeout(),
MsgHdr :: msghdr(),
Reason :: term()
; (Socket, BufSz, CtrlSz) -> {ok, MsgHdr} | {error, Reason} when
Socket :: socket(),
BufSz :: non_neg_integer(),
CtrlSz :: non_neg_integer(),
MsgHdr :: msghdr(),
Reason :: term().
recvmsg(Socket, Flags, Timeout) when is_list(Flags) ->
recvmsg(Socket, 0, 0, Flags, Timeout);
recvmsg(Socket, BufSz, CtrlSz) when is_integer(BufSz) andalso is_integer(CtrlSz) ->
recvmsg(Socket, BufSz, CtrlSz,
?SOCKET_RECV_FLAGS_DEFAULT, ?SOCKET_RECV_TIMEOUT_DEFAULT).
-spec recvmsg(Socket,
BufSz, CtrlSz,
Flags, nowait) -> {ok, MsgHdr} |
{select, SelectInfo} |
{error, Reason} when
Socket :: socket(),
BufSz :: non_neg_integer(),
CtrlSz :: non_neg_integer(),
Flags :: recv_flags(),
MsgHdr :: msghdr(),
SelectInfo :: select_info(),
Reason :: term()
; (Socket,
BufSz, CtrlSz,
Flags, Timeout) -> {ok, MsgHdr} | {error, Reason} when
Socket :: socket(),
BufSz :: non_neg_integer(),
CtrlSz :: non_neg_integer(),
Flags :: recv_flags(),
Timeout :: timeout(),
MsgHdr :: msghdr(),
Reason :: term().
recvmsg(#socket{ref = SockRef}, BufSz, CtrlSz, Flags, Timeout)
when (is_integer(BufSz) andalso (BufSz >= 0)) andalso
(is_integer(CtrlSz) andalso (CtrlSz >= 0)) andalso
is_list(Flags) andalso
(is_integer(Timeout) orelse
(Timeout =:= infinity) orelse
(Timeout =:= nowait)) ->
EFlags = enc_recv_flags(Flags),
do_recvmsg(SockRef, BufSz, CtrlSz, EFlags, Timeout).
do_recvmsg(SockRef, BufSz, CtrlSz, EFlags, Timeout) ->
TS = timestamp(Timeout),
RecvRef = make_ref(),
case nif_recvmsg(SockRef, RecvRef, BufSz, CtrlSz, EFlags) of
{ok, _MsgHdr} = OK ->
OK;
{error, eagain} when (Timeout =:= nowait) ->
?SELECT(recvmsg, RecvRef);
{error, eagain} ->
%% There is nothing just now, but we will be notified when there
%% is something to read (a select message).
NewTimeout = next_timeout(TS, Timeout),
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, RecvRef} ->
do_recvmsg(SockRef, BufSz, CtrlSz, EFlags,
next_timeout(TS, Timeout));
{?SOCKET_TAG, _Socket, abort, {RecvRef, Reason}} ->
{error, Reason}
after NewTimeout ->
cancel(SockRef, recvmsg, RecvRef),
{error, timeout}
end;
{error, closed} = ERROR ->
do_close(SockRef),
ERROR;
{error, _Reason} = ERROR ->
ERROR
end.
%% ===========================================================================
%%
%% close - close a file descriptor
%%
%% Closing a socket is a two stage rocket (because of linger).
%% We need to perform the actual socket close while in BLOCKING mode.
%% But that would hang the entire VM, so what we do is divide the
%% close in two steps:
%% 1) nif_close + the socket_stop (nif) callback function
%% This is for everything that can be done safely NON-BLOCKING.
%% 2) nif_finalize_close which is executed by a *dirty* scheduler
%% Before we call the socket close function, we set the socket
%% BLOCKING. Thereby linger is handled properly.
-spec close(Socket) -> ok | {error, Reason} when
Socket :: socket(),
Reason :: term().
close(#socket{ref = SockRef}) ->
do_close(SockRef).
do_close(SockRef) ->
case nif_close(SockRef) of
ok ->
nif_finalize_close(SockRef);
{ok, CloseRef} ->
%% We must wait for the socket_stop callback function to
%% complete its work
receive
{?SOCKET_TAG, #socket{ref = SockRef}, close, CloseRef} ->
nif_finalize_close(SockRef)
end;
{error, _} = ERROR ->
ERROR
end.
%% ===========================================================================
%%
%% shutdown - shut down part of a full-duplex connection
%%
-spec shutdown(Socket, How) -> ok | {error, Reason} when
Socket :: socket(),
How :: shutdown_how(),
Reason :: term().
shutdown(#socket{ref = SockRef}, How) ->
try
begin
EHow = enc_shutdown_how(How),
nif_shutdown(SockRef, EHow)
end
catch
throw:T ->
T;
%%
error:notsup:S ->
erlang:raise(error, notsup, S);
%%
error:Reason ->
{error, Reason}
end.
%% ===========================================================================
%%
%% setopt - manipulate individual properties of a socket
%%
%% What properties are valid depend on what kind of socket it is
%% (domain, type and protocol)
%% If its an "invalid" option (or value), we should not crash but return some
%% useful error...
%%
%%
%%
%% WE NEED TO MAKE SURE THAT THE USER DOES NOT MAKE US BLOCKING
%% AS MUCH OF THE CODE EXPECTS TO BE NON-BLOCKING!!
%%
%%
-spec setopt(Socket, otp, otp_socket_option(), Value) -> ok | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, socket, socket_option(), Value) -> ok | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, ip, ip_socket_option(), Value) -> ok | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, ipv6, ipv6_socket_option(), Value) -> ok | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, tcp, tcp_socket_option(), Value) -> ok | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, udp, udp_socket_option(), Value) -> ok | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, sctp, sctp_socket_option(), Value) -> ok | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, Level, Key, Value) -> ok | {error, Reason} when
Socket :: socket(),
Level :: non_neg_integer(),
Key :: non_neg_integer(),
Value :: binary(),
Reason :: term().
setopt(#socket{ref = SockRef}, Level, Key, Value) ->
try
begin
Domain = which_domain(SockRef),
Type = which_type(SockRef),
Protocol = which_protocol(SockRef),
{EIsEncoded, ELevel} = enc_setopt_level(Level),
EKey = enc_setopt_key(Level, Key, Domain, Type, Protocol),
EVal = enc_setopt_value(Level, Key, Value, Domain, Type, Protocol),
nif_setopt(SockRef, EIsEncoded, ELevel, EKey, EVal)
end
catch
throw:T ->
T;
%%
error:notsup:S ->
erlang:raise(error, notsup, S);
%%
error:Reason ->
{error, Reason} % Process more?
end.
%% ===========================================================================
%%
%% getopt - retrieve individual properties of a socket
%%
%% What properties are valid depend on what kind of socket it is
%% (domain, type and protocol).
%% If its an "invalid" option, we should not crash but return some
%% useful error...
%%
%% When specifying level as an integer, and therefor using "native mode",
%% we should make it possible to specify common types instead of the
%% value size. Example: int | bool | {string, pos_integer()} | non_neg_integer()
%%
-spec getopt(Socket, otp, otp_socket_option()) -> {ok, Value} | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, socket, socket_option()) -> {ok, Value} | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, ip, ip_socket_option()) -> {ok, Value} | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, ipv6, ipv6_socket_option()) -> {ok, Value} | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, tcp, tcp_socket_option()) -> {ok, Value} | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, udp, udp_socket_option()) -> {ok, Value} | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, sctp, sctp_socket_option()) -> {ok, Value} | {error, Reason} when
Socket :: socket(),
Value :: term(),
Reason :: term()
; (Socket, Level, Key) -> ok | {ok, Value} | {error, Reason} when
Socket :: socket(),
Level :: integer(),
Key :: {NativeOpt, ValueSize},
NativeOpt :: integer(),
ValueSize :: int | bool | non_neg_integer(),
Value :: term(),
Reason :: term().
getopt(#socket{ref = SockRef}, Level, Key) ->
try
begin
Domain = which_domain(SockRef),
Type = which_type(SockRef),
Protocol = which_protocol(SockRef),
{EIsEncoded, ELevel} = enc_getopt_level(Level),
EKey = enc_getopt_key(Level, Key, Domain, Type, Protocol),
%% We may need to decode the value (for the same reason
%% we (may have) needed to encode the value for setopt).
case nif_getopt(SockRef, EIsEncoded, ELevel, EKey) of
ok ->
ok;
{ok, EVal} ->
Val = dec_getopt_value(Level, Key, EVal,
Domain, Type, Protocol),
{ok, Val};
{error, _} = ERROR ->
ERROR
end
end
catch
throw:E:_S ->
E;
%%
error:notsup:S ->
erlang:raise(error, notsup, S);
%%
error:Reason:_Stack ->
{error, Reason} % Process more?
end.
%% These are internal "shortcut" functions for the options
%% domain, type and protocol.
-spec which_domain(SockRef) -> Domain when
SockRef :: reference(),
Domain :: domain().
which_domain(SockRef) ->
case nif_getopt(SockRef, true,
?SOCKET_OPT_LEVEL_OTP, ?SOCKET_OPT_OTP_DOMAIN) of
{ok, Domain} ->
Domain;
{error, _} = ERROR ->
throw(ERROR)
end.
-spec which_type(SockRef) -> Type when
SockRef :: reference(),
Type :: type().
which_type(SockRef) ->
case nif_getopt(SockRef, true,
?SOCKET_OPT_LEVEL_OTP, ?SOCKET_OPT_OTP_TYPE) of
{ok, Type} ->
Type;
{error, _} = ERROR ->
throw(ERROR)
end.
-spec which_protocol(SockRef) -> Protocol when
SockRef :: reference(),
Protocol :: protocol().
which_protocol(SockRef) ->
case nif_getopt(SockRef, true,
?SOCKET_OPT_LEVEL_OTP, ?SOCKET_OPT_OTP_PROTOCOL) of
{ok, Proto} ->
Proto;
{error, _} = ERROR ->
throw(ERROR)
end.
%% ===========================================================================
%%
%% sockname - return the current address of the socket.
%%
%%
-spec sockname(Socket) -> {ok, SockAddr} | {error, Reason} when
Socket :: socket(),
SockAddr :: sockaddr(),
Reason :: term().
sockname(#socket{ref = SockRef}) ->
nif_sockname(SockRef).
%% ===========================================================================
%%
%% peername - return the address of the peer *connected* to the socket.
%%
%%
-spec peername(Socket) -> {ok, SockAddr} | {error, Reason} when
Socket :: socket(),
SockAddr :: sockaddr(),
Reason :: term().
peername(#socket{ref = SockRef}) ->
nif_peername(SockRef).
%% ===========================================================================
%%
%% cancel - cancel an operation resulting in a select
%%
%% A call to accept, recv/recvfrom/recvmsg and send/sendto/sendmsg
%% can result in a select if they are called with the Timeout argument
%% set to nowait. This is indicated by the return of the select-info.
%% Such a operation can be cancelled by calling this function.
%%
-spec cancel(Socket, SelectInfo) -> ok | {error, Reason} when
Socket :: socket(),
SelectInfo :: select_info(),
Reason :: term().
cancel(#socket{ref = SockRef}, ?SELECT_INFO(Tag, Ref)) ->
cancel(SockRef, Tag, Ref).
%% ===========================================================================
%%
%% Encode / decode
%%
%% ===========================================================================
%% -spec enc_domain(Domain) -> non_neg_integer() when
%% Domain :: domain().
enc_domain(local) -> ?SOCKET_DOMAIN_LOCAL;
enc_domain(inet) -> ?SOCKET_DOMAIN_INET;
enc_domain(inet6) -> ?SOCKET_DOMAIN_INET6;
enc_domain(Domain) -> invalid_domain(Domain).
%% -spec enc_type(Domain, Type) -> non_neg_integer() when
%% Domain :: domain(),
%% Type :: type().
%% What combos are valid?
enc_type(_, stream) -> ?SOCKET_TYPE_STREAM;
enc_type(_, dgram) -> ?SOCKET_TYPE_DGRAM;
enc_type(_, raw) -> ?SOCKET_TYPE_RAW;
enc_type(_, seqpacket) -> ?SOCKET_TYPE_SEQPACKET;
enc_type(_, Type) -> invalid_type(Type).
-spec enc_protocol(Type, Protocol) -> non_neg_integer() |
{raw, non_neg_integer()} when
Type :: type(),
Protocol :: protocol().
enc_protocol(_, default) -> ?SOCKET_PROTOCOL_DEFAULT;
enc_protocol(dgram, ip) -> ?SOCKET_PROTOCOL_IP;
enc_protocol(stream, tcp) -> ?SOCKET_PROTOCOL_TCP;
enc_protocol(dgram, udp) -> ?SOCKET_PROTOCOL_UDP;
enc_protocol(seqpacket, sctp) -> ?SOCKET_PROTOCOL_SCTP;
enc_protocol(raw, icmp) -> ?SOCKET_PROTOCOL_ICMP;
enc_protocol(raw, igmp) -> ?SOCKET_PROTOCOL_IGMP;
enc_protocol(raw, {raw, P} = RAW) when is_integer(P) -> RAW;
enc_protocol(Type, Proto) ->
invalid_protocol(Type, Proto).
-spec enc_send_flags(Flags) -> non_neg_integer() when
Flags :: send_flags().
enc_send_flags(Flags) ->
EFlags = [{confirm, ?SOCKET_SEND_FLAG_CONFIRM},
{dontroute, ?SOCKET_SEND_FLAG_DONTROUTE},
{eor, ?SOCKET_SEND_FLAG_EOR},
{more, ?SOCKET_SEND_FLAG_MORE},
{nosignal, ?SOCKET_SEND_FLAG_NOSIGNAL},
{oob, ?SOCKET_SEND_FLAG_OOB}],
enc_flags(Flags, EFlags).
-spec enc_recv_flags(Flags) -> non_neg_integer() when
Flags :: recv_flags().
enc_recv_flags(Flags) ->
EFlags = [{cmsg_cloexec, ?SOCKET_RECV_FLAG_CMSG_CLOEXEC},
{errqueue, ?SOCKET_RECV_FLAG_ERRQUEUE},
{oob, ?SOCKET_RECV_FLAG_OOB},
{peek, ?SOCKET_RECV_FLAG_PEEK},
{trunc, ?SOCKET_RECV_FLAG_TRUNC}],
enc_flags(Flags, EFlags).
enc_flags([], _) ->
0;
enc_flags(Flags, EFlags) ->
F = fun(Flag, Acc) ->
case lists:keysearch(Flag, 1, EFlags) of
{value, {Flag, EFlag}} ->
Acc bor (1 bsl EFlag);
false ->
throw({error, {unknown_flag, Flag}})
end
end,
lists:foldl(F, 0, Flags).
%% +++ Encode setopt level +++
-spec enc_setopt_level(Level) -> {IsEncoded, EncodedLevel} when
Level :: sockopt_level(),
IsEncoded :: boolean(),
EncodedLevel :: integer().
enc_setopt_level(otp) ->
{true, ?SOCKET_OPT_LEVEL_OTP};
enc_setopt_level(socket) ->
{true, ?SOCKET_OPT_LEVEL_SOCKET};
enc_setopt_level(ip) ->
{true, ?SOCKET_OPT_LEVEL_IP};
enc_setopt_level(ipv6) ->
{true, ?SOCKET_OPT_LEVEL_IPV6};
enc_setopt_level(tcp) ->
{true, ?SOCKET_OPT_LEVEL_TCP};
enc_setopt_level(udp) ->
{true, ?SOCKET_OPT_LEVEL_UDP};
enc_setopt_level(sctp) ->
{true, ?SOCKET_OPT_LEVEL_SCTP};
%% Any option that is of an plain level must be provided as a binary
%% already fully encoded!
enc_setopt_level(L) when is_integer(L) ->
{false, L}.
%% +++ Encode setopt key +++
%% We should ...really... do something with the domain, type and protocol args...
%% Also, any option (key) which has an integer level (plain) must also be provided
%% in a plain mode, that is, as an integer.
%% Also, not all options are available on all platforms. That is something we
%% don't check here, but in the nif-code.
enc_setopt_key(Level, Opt, Domain, Type, Protocol) ->
enc_sockopt_key(Level, Opt, set, Domain, Type, Protocol).
%% +++ Encode setopt value +++
%%
%% For the most part this function does *not* do an actual encode,
%% it simply validates the value type. But in some cases it will
%% encode the value into an more "manageable" type.
%% It also handles "aliases" (see linger).
-dialyzer({nowarn_function, enc_setopt_value/6}).
-spec enc_setopt_value(otp, otp_socket_option(),
Value, Domain, Type, Protocol) -> term() when
Value :: term(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (socket, socket_option(),
Value, Domain, Type, Protocol) -> term() when
Value :: term(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (ip, ip_socket_option(),
Value, Domain, Type, Protocol) -> term() when
Value :: term(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (ipv6, ipv6_socket_option(),
Value, Domain, Type, Protocol) -> term() when
Value :: term(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (tcp, tcp_socket_option(),
Value, Domain, Type, Protocol) -> term() when
Value :: term(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (udp, udp_socket_option(),
Value, Domain, Type, Protocol) -> term() when
Value :: term(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (sctp, sctp_socket_option(),
Value, Domain, Type, Protocol) -> term() when
Value :: term(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (Level, Opt,
Value, Domain, Type, Protocol) -> term() when
Level :: integer(),
Opt :: integer(),
Value :: binary(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol().
enc_setopt_value(otp, debug, V, _, _, _) when is_boolean(V) ->
V;
enc_setopt_value(otp, iow, V, _, _, _) when is_boolean(V) ->
V;
enc_setopt_value(otp, controlling_process, V, _, _, _) when is_pid(V) ->
V;
enc_setopt_value(otp, rcvbuf, V, _, _, _) when (V =:= default) ->
0; % This will cause the nif-code to choose the default value
enc_setopt_value(otp, rcvbuf, V, _, _, _) when is_integer(V) andalso (V > 0) ->
V;
%% N: Number of reads (when specifying length = 0)
%% V: Size of the "read" buffer
enc_setopt_value(otp, rcvbuf, {N, BufSz} = V, _, stream = _T, _P)
when (is_integer(N) andalso (N > 0)) andalso
(is_integer(BufSz) andalso (BufSz > 0)) ->
V;
enc_setopt_value(otp, rcvctrlbuf, V, _, _, _) when (V =:= default) ->
0;
enc_setopt_value(otp, rcvctrlbuf, V, _, _, _) when is_integer(V) andalso (V > 0) ->
V;
enc_setopt_value(otp, sndctrlbuf, V, _, _, _) when (V =:= default) ->
0;
enc_setopt_value(otp, sndctrlbuf, V, _, _, _) when is_integer(V) andalso (V > 0) ->
V;
enc_setopt_value(otp = L, Opt, V, _D, _T, _P) ->
not_supported({L, Opt, V});
enc_setopt_value(socket, bindtodevice, V, _D, _T, _P) when is_list(V) ->
V;
enc_setopt_value(socket, broadcast, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(socket, debug, V, _D, _T, _P) when is_integer(V) ->
V;
enc_setopt_value(socket, dontroute, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(socket, keepalive, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(socket, linger, abort, D, T, P) ->
enc_setopt_value(socket, linger, {true, 0}, D, T, P);
enc_setopt_value(socket, linger, {OnOff, Secs} = V, _D, _T, _P)
when is_boolean(OnOff) andalso is_integer(Secs) andalso (Secs >= 0) ->
V;
enc_setopt_value(socket, oobinline, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(socket, peek_off, V, _D, _T, _P) when is_integer(V) ->
V;
enc_setopt_value(socket, priority, V, _D, _T, _P) when is_integer(V) ->
V;
enc_setopt_value(socket, rcvbuf, V, _D, _T, _P) when is_integer(V) ->
V;
enc_setopt_value(socket, rcvlowat, V, _D, _T, _P) when is_integer(V) ->
V;
enc_setopt_value(socket, rcvtimeo, #{sec := Sec, usec := USec} = V, _D, _T, _P)
when is_integer(Sec) andalso is_integer(USec) ->
V;
enc_setopt_value(socket, reuseaddr, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(socket, reuseport, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(socket, sndbuf, V, _D, _T, _P) when is_integer(V) ->
V;
enc_setopt_value(socket, sndlowat, V, _D, _T, _P) when is_integer(V) ->
V;
enc_setopt_value(socket, sndtimeo, #{sec := Sec, usec := USec} = V, _D, _T, _P)
when is_integer(Sec) andalso is_integer(USec) ->
V;
enc_setopt_value(socket, timestamp, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(socket = L, Opt, V, _D, _T, _P) ->
not_supported({L, Opt, V});
enc_setopt_value(ip, add_membership, #{multiaddr := MA,
interface := IF} = V, _D, _T, _P)
when (is_tuple(MA) andalso (size(MA) =:= 4)) andalso
((IF =:= any) orelse (is_tuple(IF) andalso (size(IF) =:= 4))) ->
V;
enc_setopt_value(ip, add_source_membership, #{multiaddr := MA,
interface := IF,
sourceaddr := SA} = V, _D, _T, _P)
when (is_tuple(MA) andalso (size(MA) =:= 4)) andalso
(is_tuple(IF) andalso (size(IF) =:= 4)) andalso
(is_tuple(SA) andalso (size(SA) =:= 4)) ->
V;
enc_setopt_value(ip, block_source, #{multiaddr := MA,
interface := IF,
sourceaddr := SA} = V, _D, _T, _P)
when (is_tuple(MA) andalso (size(MA) =:= 4)) andalso
(is_tuple(IF) andalso (size(IF) =:= 4)) andalso
(is_tuple(SA) andalso (size(SA) =:= 4)) ->
V;
enc_setopt_value(ip, drop_membership, #{multiaddr := MA,
interface := IF} = V, _D, _T, _P)
when (is_tuple(MA) andalso (size(MA) =:= 4)) andalso
((IF =:= any) orelse (is_tuple(IF) andalso (size(IF) =:= 4))) ->
V;
enc_setopt_value(ip, drop_source_membership, #{multiaddr := MA,
interface := IF,
sourceaddr := SA} = V, _D, _T, _P)
when (is_tuple(MA) andalso (size(MA) =:= 4)) andalso
(is_tuple(IF) andalso (size(IF) =:= 4)) andalso
(is_tuple(SA) andalso (size(SA) =:= 4)) ->
V;
enc_setopt_value(ip, freebind, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(ip, hdrincl, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(ip, minttl, V, _D, _T, _P) when is_integer(V) ->
V;
enc_setopt_value(ip, msfilter, null = V, _D, _T, _P) ->
V;
enc_setopt_value(ip, msfilter, #{multiaddr := MA,
interface := IF,
fmode := FMode,
slist := SL} = V, _D, _T, _P)
when (is_tuple(MA) andalso (size(MA) =:= 4)) andalso
(is_tuple(IF) andalso (size(IF) =:= 4)) andalso
((FMode =:= include) orelse (FMode =:= exclude)) andalso
is_list(SL) ->
ensure_ip_msfilter_slist(SL),
V;
enc_setopt_value(ip, mtu_discover, V, _D, _T, _P)
when (V =:= want) orelse
(V =:= dont) orelse
(V =:= do) orelse
(V =:= probe) orelse
is_integer(V) ->
V;
enc_setopt_value(ip, multicast_all, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, multicast_if, V, _D, _T, _P)
when (V =:= any) orelse (is_tuple(V) andalso (size(V) =:= 4)) ->
V;
enc_setopt_value(ip, multicast_loop, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, multicast_ttl, V, _D, _T, _P)
when is_integer(V) andalso (0 =< V) andalso (V =< 255) ->
V;
enc_setopt_value(ip, nodefrag, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, pktinfo, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, recvdstaddr, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, recverr, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, recvif, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, recvopts, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, recvorigdstaddr, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, recvtos, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, recvttl, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, retopts, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, router_alert, V, _D, _T, _P)
when is_integer(V) ->
V;
enc_setopt_value(ip, sendsrcaddr, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, tos, V, _D, _T, _P)
when (V =:= lowdelay) orelse
(V =:= throughput) orelse
(V =:= reliability) orelse
(V =:= mincost) orelse
is_integer(V) ->
V;
enc_setopt_value(ip, transparent, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ip, ttl, V, _D, _T, _P)
when is_integer(V) ->
V;
enc_setopt_value(ip, unblock_source, #{multiaddr := MA,
interface := IF,
sourceaddr := SA} = V, _D, _T, _P)
when (is_tuple(MA) andalso (size(MA) =:= 4)) andalso
(is_tuple(IF) andalso (size(IF) =:= 4)) andalso
(is_tuple(SA) andalso (size(SA) =:= 4)) ->
V;
enc_setopt_value(ip = L, Opt, V, _D, _T, _P) ->
not_supported({L, Opt, V});
enc_setopt_value(ipv6, addrform, inet = V, _D, _T, _P) ->
enc_domain(V);
enc_setopt_value(ipv6, add_membership, #{multiaddr := MA,
interface := IF} = V, _D, _T, _P)
when ((is_tuple(MA) andalso (size(MA) =:= 8)) andalso
(is_integer(IF) andalso (IF >= 0))) ->
V;
%% Is this obsolete? When get, the result is enoprotoopt and in the
%% header file it says 'obsolete'...
%% But there might be (old?) versions of linux where it still works...
enc_setopt_value(ipv6, authhdr, V, _D, T, _P)
when is_boolean(V) andalso ((T =:= dgram) orelse (T =:= raw)) ->
V;
enc_setopt_value(ipv6, dstopts, V, _D, T, _P)
when is_boolean(V) andalso ((T =:= dgram) orelse (T =:= raw)) ->
V;
enc_setopt_value(ipv6, drop_membership, #{multiaddr := MA,
interface := IF} = V, _D, _T, _P)
when ((is_tuple(MA) andalso (size(MA) =:= 8)) andalso
(is_integer(IF) andalso (IF >= 0))) ->
V;
enc_setopt_value(ipv6, flowinfo, V, _D, T, _P)
when is_boolean(V) andalso ((T =:= dgram) orelse (T =:= raw)) ->
V;
enc_setopt_value(ipv6, hoplimit, V, _D, T, _P)
when is_boolean(V) andalso ((T =:= dgram) orelse (T =:= raw)) ->
V;
enc_setopt_value(ipv6, hopopts, V, _D, T, _P)
when is_boolean(V) andalso ((T =:= dgram) orelse (T =:= raw)) ->
V;
enc_setopt_value(ipv6, mtu, V, _D, _T, _P) when is_integer(V) ->
V;
enc_setopt_value(ipv6, mtu_discover, V, _D, _T, _P)
when (V =:= want) orelse
(V =:= dont) orelse
(V =:= do) orelse
(V =:= probe) orelse
is_integer(V) ->
V;
enc_setopt_value(ipv6, multicast_hops, V, _D, _T, _P)
when (V =:= default) ->
-1;
enc_setopt_value(ipv6, multicast_hops, V, _D, _T, _P)
when is_integer(V) andalso (V >= 0) andalso (V =< 255) ->
V;
enc_setopt_value(ipv6, multicast_if, V, _D, _T, _P)
when is_integer(V) ->
V;
enc_setopt_value(ipv6, multicast_loop, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ipv6, recverr, V, _D, _T, _P)
when is_boolean(V) ->
V;
enc_setopt_value(ipv6, Opt, V, _D, _T, _P)
when ((Opt =:= recvpktinfo) orelse (Opt =:= pktinfo)) andalso
is_boolean(V) ->
V;
enc_setopt_value(ipv6, router_alert, V, _D, T, _P)
when is_integer(V) andalso (T =:= raw) ->
V;
enc_setopt_value(ipv6, rthdr, V, _D, T, _P)
when is_boolean(V) andalso ((T =:= dgram) orelse (T =:= raw)) ->
V;
enc_setopt_value(ipv6, unicast_hops, V, _D, _T, _P)
when (V =:= default) ->
-1;
enc_setopt_value(ipv6, unicast_hops, V, _D, _T, _P)
when is_integer(V) andalso (V >= 0) andalso (V =< 255) ->
V;
enc_setopt_value(ipv6, v6only, V, _D, _T, _P) when is_boolean(V) ->
V;
enc_setopt_value(ipv6 = L, Opt, V, _D, _T, _P) ->
not_supported({L, Opt, V});
enc_setopt_value(tcp, congestion, V, _D, T, P)
when is_list(V) andalso
(T =:= stream) andalso
(P =:= tcp) ->
V;
enc_setopt_value(tcp, maxseg, V, _D, T, P)
when is_integer(V) andalso
(T =:= stream) andalso
(P =:= tcp) ->
V;
enc_setopt_value(tcp, nodelay, V, _D, T, P)
when is_boolean(V) andalso
(T =:= stream) andalso
(P =:= tcp) ->
V;
enc_setopt_value(tcp = L, Opt, V, _D, _T, _P) ->
not_supported({L, Opt, V});
enc_setopt_value(udp, cork, V, _D, T, P)
when is_boolean(V) andalso (T =:= dgram) andalso (P =:= udp) ->
V;
enc_setopt_value(udp = L, Opt, _V, _D, _T, _P) ->
not_supported({L, Opt});
enc_setopt_value(sctp, associnfo, #{assoc_id := AssocId,
asocmaxrxt := MaxRxt,
num_peer_dests := NumPeerDests,
peer_rwnd := PeerRWND,
local_rwnd := LocalRWND,
cookie_life := CLife} = V,
_D, _T, P)
when is_integer(AssocId) andalso
is_integer(MaxRxt) andalso (MaxRxt >= 0) andalso
is_integer(NumPeerDests) andalso (NumPeerDests >= 0) andalso
is_integer(PeerRWND) andalso (PeerRWND >= 0) andalso
is_integer(LocalRWND) andalso (LocalRWND >= 0) andalso
is_integer(CLife) andalso (CLife >= 0) andalso
(P =:= sctp) ->
V;
enc_setopt_value(sctp, autoclose, V, _D, _T, P)
when is_integer(V) andalso (V >= 0) andalso (P =:= sctp) ->
V;
enc_setopt_value(sctp, disable_fragments, V, _D, _T, P)
when is_boolean(V) andalso (P =:= sctp) ->
V;
enc_setopt_value(sctp, events, #{data_in := DataIn,
association := Assoc,
address := Addr,
send_failure := SndFailure,
peer_error := PeerError,
shutdown := Shutdown,
partial_delivery := PartialDelivery,
adaptation_layer := AdaptLayer,
authentication := Auth,
sender_dry := SndDry} = V, _D, _T, P)
when is_boolean(DataIn) andalso
is_boolean(Assoc) andalso
is_boolean(Addr) andalso
is_boolean(SndFailure) andalso
is_boolean(PeerError) andalso
is_boolean(Shutdown) andalso
is_boolean(PartialDelivery) andalso
is_boolean(AdaptLayer) andalso
is_boolean(Auth) andalso
is_boolean(SndDry) andalso
(P =:= sctp) ->
V;
enc_setopt_value(sctp, initmsg, #{num_outstreams := NumOut,
max_instreams := MaxIn,
max_attempts := MaxAttempts,
max_init_timeo := MaxInitTO} = V,
_D, _T, P)
when is_integer(NumOut) andalso (NumOut >= 0) andalso
is_integer(MaxIn) andalso (MaxIn >= 0) andalso
is_integer(MaxAttempts) andalso (MaxAttempts >= 0) andalso
is_integer(MaxInitTO) andalso (MaxInitTO >= 0) andalso
(P =:= sctp) ->
V;
enc_setopt_value(sctp, maxseg, V, _D, _T, P)
when is_integer(V) andalso (V >= 0) andalso (P =:= sctp) ->
V;
enc_setopt_value(sctp, nodelay, V, _D, _T, P)
when is_boolean(V) andalso (P =:= sctp) ->
V;
enc_setopt_value(sctp, rtoinfo, #{assoc_id := AssocId,
initial := Init,
max := Max,
min := Min} = V,
_D, _T, P)
when is_integer(AssocId) andalso
is_integer(Init) andalso (Init >= 0) andalso
is_integer(Max) andalso (Max >= 0) andalso
is_integer(Min) andalso (Min >= 0) andalso
(P =:= sctp) ->
V;
enc_setopt_value(sctp = L, Opt, V, _D, _T, _P) ->
not_supported({L, Opt, V});
%% enc_setopt_value(raw = L, Opt, _V, _D, _T, _P) ->
%% not_supported({L, Opt});
%% Is this correct? What about getopt?
enc_setopt_value(L, Opt, V, _, _, _)
when is_integer(L) andalso is_integer(Opt) andalso is_binary(V) ->
V.
%% +++ Encode getopt value +++
enc_getopt_level(Level) ->
enc_setopt_level(Level).
%% +++ Encode getopt key +++
enc_getopt_key(Level, Opt, Domain, Type, Protocol) ->
enc_sockopt_key(Level, Opt, get, Domain, Type, Protocol).
%% +++ Decode getopt value +++
%%
%% For the most part, we simply let the value pass through, but for some
%% values we may need to do an actual decode.
%%
%% Let the user deal with this for now...
dec_getopt_value(_L, _Opt, V, _D, _T, _P) ->
V.
%% +++ Encode socket option key +++
%% Most options are usable both for set and get, but some are
%% are only available for e.g. get.
-spec enc_sockopt_key(Level, Opt,
Direction,
Domain, Type, Protocol) -> non_neg_integer() when
Level :: otp,
Direction :: set | get,
Opt :: otp_socket_option(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (Level, Direction, Opt,
Domain, Type, Protocol) -> non_neg_integer() when
Level :: socket,
Direction :: set | get,
Opt :: socket_option(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (Level, Direction, Opt,
Domain, Type, Protocol) -> non_neg_integer() when
Level :: ip,
Direction :: set | get,
Opt :: ip_socket_option(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (Level, Direction, Opt,
Domain, Type, Protocol) -> non_neg_integer() when
Level :: ipv6,
Direction :: set | get,
Opt :: ipv6_socket_option(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (Level, Direction, Opt,
Domain, Type, Protocol) -> non_neg_integer() when
Level :: tcp,
Direction :: set | get,
Opt :: tcp_socket_option(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (Level, Direction, Opt,
Domain, Type, Protocol) -> non_neg_integer() when
Level :: udp,
Direction :: set | get,
Opt :: udp_socket_option(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (Level, Direction, Opt,
Domain, Type, Protocol) -> non_neg_integer() when
Level :: sctp,
Direction :: set | get,
Opt :: sctp_socket_option(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (Level, Direction, Opt,
Domain, Type, Protocol) -> non_neg_integer() when
Level :: integer(),
Direction :: set,
Opt :: integer(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol()
; (Level, Direction, Opt,
Domain, Type, Protocol) -> non_neg_integer() when
Level :: integer(),
Direction :: get,
Opt :: {NativeOpt, ValueSize},
NativeOpt :: integer(),
ValueSize :: non_neg_integer(),
Domain :: domain(),
Type :: type(),
Protocol :: protocol().
%% +++ OTP socket options +++
enc_sockopt_key(otp, debug, _, _, _, _) ->
?SOCKET_OPT_OTP_DEBUG;
enc_sockopt_key(otp, iow, _, _, _, _) ->
?SOCKET_OPT_OTP_IOW;
enc_sockopt_key(otp, controlling_process, _, _, _, _) ->
?SOCKET_OPT_OTP_CTRL_PROC;
enc_sockopt_key(otp, rcvbuf, _, _, _, _) ->
?SOCKET_OPT_OTP_RCVBUF;
enc_sockopt_key(otp, rcvctrlbuf, _, _, _, _) ->
?SOCKET_OPT_OTP_RCVCTRLBUF;
enc_sockopt_key(otp, sndctrlbuf, _, _, _, _) ->
?SOCKET_OPT_OTP_SNDCTRLBUF;
enc_sockopt_key(otp, fd, get = _Dir, _, _, _) ->
?SOCKET_OPT_OTP_FD;
enc_sockopt_key(otp = L, Opt, _, _, _, _) ->
not_supported({L, Opt});
%% +++ SOCKET socket options +++
enc_sockopt_key(socket = _L, acceptconn = _Opt, get = _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_ACCEPTCONN;
enc_sockopt_key(socket = L, acceptconn = Opt, Dir, _D, _T, _P) ->
not_supported({L, Opt, Dir});
enc_sockopt_key(socket = L, acceptfilter = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
%% Before linux 3.8, this socket option could be set but not get.
%% Maximum size of buffer for name: IFNAMSIZ
%% So, we let the implementation decide.
enc_sockopt_key(socket = _L, bindtodevice = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_BINDTODEVICE;
enc_sockopt_key(socket, broadcast = _Opt, _Dir, _D, dgram = _T, _P) ->
?SOCKET_OPT_SOCK_BROADCAST;
enc_sockopt_key(socket = L, busy_poll = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(socket = _L, debug = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_DEBUG;
enc_sockopt_key(socket, domain = _Opt, get = _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_DOMAIN;
enc_sockopt_key(socket, dontroute = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_DONTROUTE;
enc_sockopt_key(socket = L, error = Opt, get = _Dir, _D, _T, _P) ->
not_supported({L, Opt});
%% This is only for connection-oriented sockets, but who are those?
%% Type = stream or Protocol = tcp?
%% For now, we just let is pass and it will fail later if not ok...
enc_sockopt_key(socket, keepalive = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_KEEPALIVE;
enc_sockopt_key(socket, linger = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_LINGER;
enc_sockopt_key(socket = L, mark = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(socket = _L, oobinline = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_OOBINLINE;
enc_sockopt_key(socket = L, passcred = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(socket = _L, peek_off = _Opt, _Dir, local = _D, _T, _P) ->
?SOCKET_OPT_SOCK_PEEK_OFF;
enc_sockopt_key(socket = L, peekcred = Opt, get = _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(socket, priority = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_PRIORITY;
enc_sockopt_key(socket, protocol = _Opt, get = _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_PROTOCOL;
enc_sockopt_key(socket, rcvbuf = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_RCVBUF;
enc_sockopt_key(socket = L, rcvbufforce = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
%% May not work on linux.
enc_sockopt_key(socket = _L, rcvlowat = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_RCVLOWAT;
enc_sockopt_key(socket = _L, rcvtimeo = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_RCVTIMEO;
enc_sockopt_key(socket = _L, reuseaddr = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_REUSEADDR;
enc_sockopt_key(socket = _L, reuseport = _Opt, _Dir, D, _T, _P)
when ((D =:= inet) orelse (D =:= inet6)) ->
?SOCKET_OPT_SOCK_REUSEPORT;
enc_sockopt_key(socket = L, rxq_ovfl = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(socket = L, setfib = Opt, set = _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(socket = _L, sndbuf = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_SNDBUF;
enc_sockopt_key(socket = L, sndbufforce = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
%% Not changeable on linux.
enc_sockopt_key(socket = _L, sndlowat = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_SNDLOWAT;
enc_sockopt_key(socket = _L, sndtimeo = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_SNDTIMEO;
enc_sockopt_key(socket = _L, timestamp = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_TIMESTAMP;
enc_sockopt_key(socket = _L, type = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SOCK_TYPE;
enc_sockopt_key(socket = L, UnknownOpt, _Dir, _D, _T, _P) ->
unknown({L, UnknownOpt});
%% +++ IP socket options +++
enc_sockopt_key(ip = _L, add_membership = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_ADD_MEMBERSHIP;
enc_sockopt_key(ip = _L, add_source_membership = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_ADD_SOURCE_MEMBERSHIP;
enc_sockopt_key(ip = _L, block_source = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_BLOCK_SOURCE;
%% FreeBSD only?
%% Only respected on udp and raw ip (unless the hdrincl option has been set).
enc_sockopt_key(ip = L, dontfrag = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ip = _L, drop_membership = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_DROP_MEMBERSHIP;
enc_sockopt_key(ip = _L, drop_source_membership = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_DROP_SOURCE_MEMBERSHIP;
%% Linux only?
enc_sockopt_key(ip = _L, freebind = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_FREEBIND;
enc_sockopt_key(ip = _L, hdrincl = _Opt, _Dir, _D, raw = _T, _P) ->
?SOCKET_OPT_IP_HDRINCL;
enc_sockopt_key(ip = _L, minttl = _Opt, _Dir, _D, raw = _T, _P) ->
?SOCKET_OPT_IP_MINTTL;
enc_sockopt_key(ip = _L, msfilter = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_MSFILTER;
enc_sockopt_key(ip = _L, mtu = _Opt, get = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_MTU;
enc_sockopt_key(ip = _L, mtu_discover = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_MTU_DISCOVER;
enc_sockopt_key(ip = _L, multicast_all = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_MULTICAST_ALL;
enc_sockopt_key(ip = _L, multicast_if = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_MULTICAST_IF;
enc_sockopt_key(ip = _L, multicast_loop = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_MULTICAST_LOOP;
enc_sockopt_key(ip = _L, multicast_ttl = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_MULTICAST_TTL;
enc_sockopt_key(ip = _L, nodefrag = _Opt, _Dir, _D, raw = _T, _P) ->
?SOCKET_OPT_IP_NODEFRAG;
enc_sockopt_key(ip = L, options = Opt, _Dir, _D, _T, _P) ->
not_supported({Opt, L});
enc_sockopt_key(ip = _L, pktinfo = _Opt, _Dir, _D, dgram = _T, _P) ->
?SOCKET_OPT_IP_PKTINFO;
enc_sockopt_key(ip = _L, recvdstaddr = _Opt, _Dir, _D, T, _P) when (T =:= dgram) ->
?SOCKET_OPT_IP_RECVDSTADDR;
enc_sockopt_key(ip = _L, recverr = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_RECVERR;
enc_sockopt_key(ip = _L, recvif = _Opt, _Dir, _D, T, _P)
when (T =:= dgram) orelse (T =:= raw) ->
?SOCKET_OPT_IP_RECVIF;
enc_sockopt_key(ip = _L, recvopts = _Opt, _Dir, _D, T, _P) when (T =/= stream) ->
?SOCKET_OPT_IP_RECVOPTS;
enc_sockopt_key(ip = _L, recvorigdstaddr = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_RECVORIGDSTADDR;
enc_sockopt_key(ip, recvtos = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_RECVTOS;
enc_sockopt_key(ip = _L, recvttl = _Opt, _Dir, _D, T, _P) when (T =/= stream) ->
?SOCKET_OPT_IP_RECVTTL;
enc_sockopt_key(ip = _L, retopts = _Opt, _Dir, _D, T, _P) when (T =/= stream) ->
?SOCKET_OPT_IP_RETOPTS;
enc_sockopt_key(ip, router_alert = _Opt, _Dir, _D, raw = _T, _P) ->
?SOCKET_OPT_IP_ROUTER_ALERT;
enc_sockopt_key(ip, sendsrcaddr = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_SENDSRCADDR;
%% On FreeBSD it specifies that this option is only valid
%% for stream, dgram and "some" raw sockets...
%% No such condition on linux (in the man page)...
enc_sockopt_key(ip, tos = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_TOS;
enc_sockopt_key(ip = _L, transparent = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_TRANSPARENT;
enc_sockopt_key(ip, ttl = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_TTL;
enc_sockopt_key(ip = _L, unblock_source = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IP_UNBLOCK_SOURCE;
enc_sockopt_key(ip = L, UnknownOpt, _Dir, _D, _T, _P) ->
unknown({L, UnknownOpt});
%% IPv6 socket options
enc_sockopt_key(ipv6 = _L, addrform = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_ADDRFORM;
enc_sockopt_key(ipv6, add_membership = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_ADD_MEMBERSHIP;
enc_sockopt_key(ipv6 = _L, authhdr = _Opt, _Dir, _D, T, _P)
when ((T =:= dgram) orelse (T =:= raw)) ->
?SOCKET_OPT_IPV6_AUTHHDR;
enc_sockopt_key(ipv6 = L, auth_level = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = L, checksum = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6, drop_membership = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_DROP_MEMBERSHIP;
enc_sockopt_key(ipv6 = _L, dstopts = _Opt, _Dir, _D, T, _P)
when (T =:= dgram) orelse (T =:= raw) ->
?SOCKET_OPT_IPV6_DSTOPTS;
enc_sockopt_key(ipv6 = L, esp_trans_level = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = L, esp_network_level = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = _L, flowinfo = _Opt, _Dir, _D, T, _P)
when (T =:= dgram) orelse (T =:= raw) ->
?SOCKET_OPT_IPV6_DSTOPTS;
enc_sockopt_key(ipv6, hoplimit = _Opt, _Dir, _D, T, _P)
when (T =:= dgram) orelse (T =:= raw) ->
?SOCKET_OPT_IPV6_HOPLIMIT;
enc_sockopt_key(ipv6 = _L, hopopts = _Opt, _Dir, _D, T, _P)
when ((T =:= dgram) orelse (T =:= raw)) ->
?SOCKET_OPT_IPV6_HOPOPTS;
enc_sockopt_key(ipv6 = L, ipcomp_level = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = L, join_group = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = L, leave_group = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = _L, mtu = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_MTU;
enc_sockopt_key(ipv6 = _L, mtu_discover = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_MTU_DISCOVER;
enc_sockopt_key(ipv6 = _L, multicast_hops = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_MULTICAST_HOPS;
enc_sockopt_key(ipv6 = _L, multicast_if = _Opt, _Dir, _D, T, _P)
when (T =:= dgram) orelse (T =:= raw) ->
?SOCKET_OPT_IPV6_MULTICAST_IF;
enc_sockopt_key(ipv6 = _L, multicast_loop = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_MULTICAST_LOOP;
enc_sockopt_key(ipv6 = L, portrange = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = L, pktoptions = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = _L, recverr = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_RECVERR;
enc_sockopt_key(ipv6 = _L, Opt, _Dir, _D, T, _P)
when ((Opt =:= recvpktinfo) orelse (Opt =:= pktinfo)) andalso
((T =:= dgram) orelse (T =:= raw)) ->
?SOCKET_OPT_IPV6_RECVPKTINFO;
enc_sockopt_key(ipv6 = L, recvtclass = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = _L, router_alert = _Opt, _Dir, _D, T, _P) when (T =:= raw) ->
?SOCKET_OPT_IPV6_ROUTER_ALERT;
enc_sockopt_key(ipv6 = _L, rthdr = _Opt, _Dir, _D, T, _P)
when ((T =:= dgram) orelse (T =:= raw)) ->
?SOCKET_OPT_IPV6_RTHDR;
enc_sockopt_key(ipv6 = L, tclass = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = _L, unicast_hops = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_UNICAST_HOPS;
enc_sockopt_key(ipv6 = L, use_min_mtu = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(ipv6 = _L, v6only = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_IPV6_V6ONLY;
enc_sockopt_key(ipv6 = L, UnknownOpt, _Dir, _D, _T, _P) ->
unknown({L, UnknownOpt});
%% TCP socket options
%% There are other options that would be useful; info,
%% but they are difficult to get portable...
enc_sockopt_key(tcp, congestion = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_TCP_CONGESTION;
enc_sockopt_key(tcp = L, cork = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(tcp = L, keepidle = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(tcp = L, keepintvl = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(tcp = L, keepcnt = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(tcp, maxseg = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_TCP_MAXSEG;
enc_sockopt_key(tcp = L, md5sig = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(tcp, nodelay = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_TCP_NODELAY;
enc_sockopt_key(tcp = L, noopt = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(tcp = L, nopush = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(tcp = L, syncnt = Opt, _Dir, _D, _T, _P) -> % Only set? 1..255
not_supported({L, Opt});
enc_sockopt_key(tcp = L, user_timeout = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(tcp = L, UnknownOpt, _Dir, _D, _T, _P) ->
unknown({L, UnknownOpt});
%% UDP socket options
enc_sockopt_key(udp, cork = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_UDP_CORK;
enc_sockopt_key(udp = L, UnknownOpt, _Dir, _D, _T, _P) ->
unknown({L, UnknownOpt});
%% SCTP socket options
enc_sockopt_key(sctp = L, adaption_layer = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = _L, associnfo = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SCTP_ASSOCINFO;
enc_sockopt_key(sctp = L, auth_active_key = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, auth_asconf = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, auth_chunk = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, auth_key = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, auth_delete_key = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp, autoclose = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SCTP_AUTOCLOSE;
enc_sockopt_key(sctp = L, context = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, default_send_params = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, delayed_ack_time = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = _L, disable_fragments = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SCTP_DISABLE_FRAGMENTS;
enc_sockopt_key(sctp = L, hmac_ident = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = _L, events = _Opt, set = _Dir, _D, _T, _P) ->
?SOCKET_OPT_SCTP_EVENTS;
enc_sockopt_key(sctp = L, explicit_eor = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, fragment_interleave = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, get_peer_addr_info = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = _L, initmsg = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SCTP_INITMSG;
enc_sockopt_key(sctp = L, i_want_mapped_v4_addr = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, local_auth_chunks = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = _L, maxseg = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SCTP_MAXSEG;
enc_sockopt_key(sctp = L, maxburst = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp, nodelay = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SCTP_NODELAY;
enc_sockopt_key(sctp = L, partial_delivery_point = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, peer_addr_params = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, peer_auth_chunks = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, primary_addr = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, reset_streams = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = _L, rtoinfo = _Opt, _Dir, _D, _T, _P) ->
?SOCKET_OPT_SCTP_RTOINFO;
enc_sockopt_key(sctp = L, set_peer_primary_addr = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, status = Opt, get = _Dir, _D, _T, _P) ->
not_supported({L, Opt}); % ?SOCKET_OPT_SCTP_RTOINFO;
enc_sockopt_key(sctp = L, use_exp_recvinfo = Opt, _Dir, _D, _T, _P) ->
not_supported({L, Opt});
enc_sockopt_key(sctp = L, UnknownOpt, _Dir, _D, _T, _P) ->
unknown({L, UnknownOpt});
%% +++ "Native" socket options +++
enc_sockopt_key(Level, Opt, set = _Dir, _D, _T, _P)
when is_integer(Level) andalso is_integer(Opt) ->
Opt;
enc_sockopt_key(Level, {NativeOpt, ValueSize} = Opt, get = _Dir, _D, _T, _P)
when is_integer(Level) andalso
is_integer(NativeOpt) andalso
((is_integer(ValueSize) andalso (ValueSize >= 0)) orelse
((ValueSize =:= int) orelse (ValueSize =:= bool))) ->
Opt;
enc_sockopt_key(Level, Opt, _Dir, _Domain, _Type, _Protocol) ->
unknown({Level, Opt}).
enc_shutdown_how(read) ->
?SOCKET_SHUTDOWN_HOW_READ;
enc_shutdown_how(write) ->
?SOCKET_SHUTDOWN_HOW_WRITE;
enc_shutdown_how(read_write) ->
?SOCKET_SHUTDOWN_HOW_READ_WRITE.
%% ===========================================================================
%%
%% Misc utility functions
%%
%% ===========================================================================
-dialyzer({nowarn_function, ensure_ip_msfilter_slist/1}).
ensure_ip_msfilter_slist(SL) ->
EnsureSA = fun(SA) when is_tuple(SA) andalso (size(SA) =:= 4) -> ok;
(_) -> einval()
end,
lists:foreach(EnsureSA, SL).
ensure_sockaddr(#{family := inet} = SockAddr) ->
maps:merge(?SOCKADDR_IN4_DEFAULTS, SockAddr);
ensure_sockaddr(#{family := inet6} = SockAddr) ->
maps:merge(?SOCKADDR_IN6_DEFAULTS, SockAddr);
ensure_sockaddr(#{family := local, path := Path} = SockAddr)
when is_list(Path) andalso
(length(Path) > 0) andalso
(length(Path) =< 255) ->
BinPath = unicode:characters_to_binary(Path, file:native_name_encoding()),
ensure_sockaddr(SockAddr#{path => BinPath});
ensure_sockaddr(#{family := local, path := Path} = SockAddr)
when is_binary(Path) andalso
(byte_size(Path) > 0) andalso
(byte_size(Path) =< 255) ->
SockAddr;
ensure_sockaddr(_SockAddr) ->
einval().
cancel(SockRef, Op, OpRef) ->
case nif_cancel(SockRef, Op, OpRef) of
%% The select has already completed
{error, select_sent} ->
flush_select_msgs(SockRef, OpRef);
Other ->
Other
end.
flush_select_msgs(SockRef, Ref) ->
receive
{?SOCKET_TAG, #socket{ref = SockRef}, select, Ref} ->
flush_select_msgs(SockRef, Ref)
after 0 ->
ok
end.
%% formated_timestamp() ->
%% format_timestamp(os:timestamp()).
%% format_timestamp(Now) ->
%% N2T = fun(N) -> calendar:now_to_local_time(N) end,
%% format_timestamp(Now, N2T, true).
%% format_timestamp({_N1, _N2, N3} = N, N2T, true) ->
%% FormatExtra = ".~.2.0w",
%% ArgsExtra = [N3 div 10000],
%% format_timestamp(N, N2T, FormatExtra, ArgsExtra);
%% format_timestamp({_N1, _N2, _N3} = N, N2T, false) ->
%% FormatExtra = "",
%% ArgsExtra = [],
%% format_timestamp(N, N2T, FormatExtra, ArgsExtra).
%% format_timestamp(N, N2T, FormatExtra, ArgsExtra) ->
%% {Date, Time} = N2T(N),
%% {YYYY,MM,DD} = Date,
%% {Hour,Min,Sec} = Time,
%% FormatDate =
%% io_lib:format("~.4w-~.2.0w-~.2.0w ~.2.0w:~.2.0w:~.2.0w" ++ FormatExtra,
%% [YYYY, MM, DD, Hour, Min, Sec] ++ ArgsExtra),
%% lists:flatten(FormatDate).
%% A timestamp in ms
timestamp(nowait = T) ->
T;
timestamp(infinity) ->
undefined;
timestamp(_) ->
timestamp().
timestamp() ->
erlang:monotonic_time(milli_seconds).
next_timeout(_, nowait = Timeout) ->
Timeout;
next_timeout(_, infinity = Timeout) ->
Timeout;
next_timeout(TS, Timeout) ->
NewTimeout = Timeout - tdiff(TS, timestamp()),
if
(NewTimeout > 0) ->
NewTimeout;
true ->
0
end.
tdiff(T1, T2) ->
T2 - T1.
%% p(F) ->
%% p(F, []).
%% p(F, A) ->
%% p(get(sname), F, A).
%% p(undefined, F, A) ->
%% p("***", F, A);
%% p(SName, F, A) ->
%% TS = formated_timestamp(),
%% io:format(user,"[~s][~s,~p] " ++ F ++ "~n", [TS, SName, self()|A]),
%% io:format("[~s][~s,~p] " ++ F ++ "~n", [TS, SName, self()|A]).
%% ===========================================================================
%%
%% Error functions
%%
%% ===========================================================================
-spec invalid_domain(Domain) -> no_return() when
Domain :: term().
invalid_domain(Domain) ->
error({invalid_domain, Domain}).
-spec invalid_type(Type) -> no_return() when
Type :: term().
invalid_type(Type) ->
error({invalid_type, Type}).
-spec invalid_protocol(Type, Proto) -> no_return() when
Type :: term(),
Proto :: term().
invalid_protocol(Type, Proto) ->
error({invalid_protocol, {Type, Proto}}).
-spec not_supported(What) -> no_return() when
What :: term().
not_supported(What) ->
error({not_supported, What}).
-spec unknown(What) -> no_return() when
What :: term().
unknown(What) ->
error({unknown, What}).
-spec einval() -> no_return().
einval() ->
error(einval).
-spec error(Reason) -> no_return() when
Reason :: term().
error(Reason) ->
throw({error, Reason}).
%% ===========================================================================
%%
%% Below follows the actual NIF-functions.
%%
%% ===========================================================================
nif_info() ->
erlang:nif_error(undef).
nif_info(_SRef) ->
erlang:nif_error(undef).
nif_command(_Command) ->
erlang:nif_error(undef).
nif_supports(_Key) ->
erlang:nif_error(undef).
nif_open(_Domain, _Type, _Protocol, _Extra) ->
erlang:nif_error(undef).
nif_bind(_SRef, _SockAddr) ->
erlang:nif_error(undef).
nif_bind(_SRef, _SockAddrs, _Action) ->
erlang:nif_error(undef).
nif_connect(_SRef, _SockAddr) ->
erlang:nif_error(undef).
nif_finalize_connection(_SRef) ->
erlang:nif_error(undef).
nif_listen(_SRef, _Backlog) ->
erlang:nif_error(undef).
nif_accept(_SRef, _Ref) ->
erlang:nif_error(undef).
nif_send(_SockRef, _SendRef, _Data, _Flags) ->
erlang:nif_error(undef).
nif_sendto(_SRef, _SendRef, _Data, _Dest, _Flags) ->
erlang:nif_error(undef).
nif_sendmsg(_SRef, _SendRef, _MsgHdr, _Flags) ->
erlang:nif_error(undef).
nif_recv(_SRef, _RecvRef, _Length, _Flags) ->
erlang:nif_error(undef).
nif_recvfrom(_SRef, _RecvRef, _Length, _Flags) ->
erlang:nif_error(undef).
nif_recvmsg(_SRef, _RecvRef, _BufSz, _CtrlSz, _Flags) ->
erlang:nif_error(undef).
nif_cancel(_SRef, _Op, _Ref) ->
erlang:nif_error(undef).
nif_close(_SRef) ->
erlang:nif_error(undef).
nif_shutdown(_SRef, _How) ->
erlang:nif_error(undef).
nif_finalize_close(_SRef) ->
erlang:nif_error(undef).
nif_setopt(_Ref, _IsEnc, _Lev, _Key, _Val) ->
erlang:nif_error(undef).
nif_getopt(_Ref, _IsEnc, _Lev, _Key) ->
erlang:nif_error(undef).
nif_sockname(_Ref) ->
erlang:nif_error(undef).
nif_peername(_Ref) ->
erlang:nif_error(undef).