%%---------------------------------------------------------------------- %% %CopyrightBegin% %% %% Copyright Ericsson AB 2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in %% compliance with the License. You should have received a copy of the %% Erlang Public License along with this software. If not, it can be %% retrieved online at http://www.erlang.org/. %% %% Software distributed under the License is distributed on an "AS IS" %% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See %% the License for the specific language governing rights and limitations %% under the License. %% %% %CopyrightEnd% %% %%---------------------------------------------------------------------- %% File: ct_netconfc.erl %% %% Description: %% This file contains the Netconf client interface %% %% @author Support %% %% @doc Netconf client module. %% %%

The Netconf client is compliant with RFC4741 and RFC4742.

%% %%

For each server to test against, the following entry can be %% added to a configuration file:

%% %%

`{server_id(),options()}.'

%% %%

The `server_id()' or an associated `target_name()' (see %% {@link ct}) shall then be used in calls to {@link open/2}.

%% %%

If no configuration exists for a server, a session can still be %% opened by calling {@link open/2} with all necessary options given %% in the call. The first argument to {@link open/2} can then be any %% atom.

%% %% == Logging == %% %% The netconf server uses the `error_logger' for logging of netconf %% traffic. A special purpose error handler is implemented in %% `ct_conn_log_h'. To use this error handler, add the `cth_conn_log' %% hook in your test suite, e.g. %% %% ``` %% suite() -> %% [{ct_hooks, [{cth_conn_log, [{conn_mod(),hook_options()}]}]}]. %%''' %% %% The `conn_mod()' is the name of the common_test module implementing %% the connection protocol, e.g. `ct_netconfc'. %% %% The hook option `log_type' specifies the type of logging: %% %%
%%
`raw'
%%
The sent and received netconf data is logged to a separate %% text file as is without any formatting. A link to the file is %% added to the test case HTML log.
%% %%
`pretty'
%%
The sent and received netconf data is logged to a separate %% text file with XML data nicely indented. A link to the file is %% added to the test case HTML log.
%% %%
`html (default)'
%%
The sent and received netconf traffic is pretty printed %% directly in the test case HTML log.
%% %%
`silent'
%%
Netconf traffic is not logged.
%%
%% %% By default, all netconf traffic is logged in one single log %% file. However, it is possible to have different connections logged %% in separate files. To do this, use the hook option `hosts' and %% list the names of the servers/connections that will be used in the %% suite. Note that the connections must be named for this to work, %% i.e. they must be opened with {@link open/2}. %% %% The `hosts' option has no effect if `log_type' is set to `html' or %% `silent'. %% %% The hook options can also be specified in a configuration file with %% the configuration variable `ct_conn_log': %% %% ``` %% {ct_conn_log,[{conn_mod(),hook_options()}]}. %% ''' %% %% For example: %% %% ``` %% {ct_conn_log,[{ct_netconfc,[{log_type,pretty}, %% {hosts,[key_or_name()]}]}]} %% ''' %% %% Note that hook options specified in a configuration file %% will overwrite the hardcoded hook options in the test suite. %% %% === Logging example 1 === %% %% The following `ct_hooks' statement will cause pretty printing of %% netconf traffic to separate logs for the connections named %% `nc_server1' and `nc_server2'. Any other connections will be logged %% to default netconf log. %% %% ``` %% suite() -> %% [{ct_hooks, [{cth_conn_log, [{ct_netconfc,[{log_type,pretty}}, %% {hosts,[nc_server1,nc_server2]}]} %% ]}]}]. %%''' %% %% Connections must be opened like this: %% %% ``` %% open(nc_server1,[...]), %% open(nc_server2,[...]). %% ''' %% %% === Logging example 2 === %% %% The following configuration file will cause raw logging of all %% netconf traffic into one single text file. %% %% ``` %% {ct_conn_log,[{ct_netconfc,[{log_type,raw}]}]}. %% ''' %% %% The `ct_hooks' statement must look like this: %% %% ``` %% suite() -> %% [{ct_hooks, [{cth_conn_log, []}]}]. %% ''' %% %% The same `ct_hooks' statement without the configuration file would %% cause HTML logging of all netconf connections into the test case %% HTML log. %% %% == Notifications == %% %% The netconf client is also compliant with RFC5277 NETCONF Event %% Notifications, which defines a mechanism for an asynchronous %% message notification delivery service for the netconf protocol. %% %% Specific functions to support this are {@link %% create_subscription/6} and {@link get_event_streams/3}. (The %% functions also exist with other arities.) %% %% @end %%---------------------------------------------------------------------- -module(ct_netconfc). -include("ct_netconfc.hrl"). -include("ct_util.hrl"). -include_lib("xmerl/include/xmerl.hrl"). %%---------------------------------------------------------------------- %% External exports %%---------------------------------------------------------------------- -export([open/1, open/2, only_open/1, only_open/2, hello/1, hello/2, close_session/1, close_session/2, kill_session/2, kill_session/3, send/2, send/3, send_rpc/2, send_rpc/3, lock/2, lock/3, unlock/2, unlock/3, get/2, get/3, get_config/3, get_config/4, edit_config/3, edit_config/4, delete_config/2, delete_config/3, copy_config/3, copy_config/4, action/2, action/3, create_subscription/1, create_subscription/2, create_subscription/3, create_subscription/4, create_subscription/5, create_subscription/6, get_event_streams/2, get_event_streams/3, get_capabilities/1, get_capabilities/2, get_session_id/1, get_session_id/2]). %%---------------------------------------------------------------------- %% Exported types %%---------------------------------------------------------------------- -export_type([hook_options/0, conn_mod/0, log_type/0, key_or_name/0, notification/0]). %%---------------------------------------------------------------------- %% Internal exports %%---------------------------------------------------------------------- %% ct_gen_conn callbacks -export([init/3, handle_msg/3, handle_msg/2, terminate/2, close/1]). %% ct_conn_log callback -export([format_data/2]). %%---------------------------------------------------------------------- %% Internal defines %%---------------------------------------------------------------------- -define(APPLICATION,?MODULE). -define(VALID_SSH_OPTS,[user, password, user_dir]). -define(DEFAULT_STREAM,"NETCONF"). -define(error(ConnName,Report), error_logger:error_report([{ct_connection,ConnName}, {client,self()}, {module,?MODULE}, {line,?LINE} | Report])). -define(is_timeout(T), (is_integer(T) orelse T==infinity)). -define(is_filter(F), (is_atom(F) orelse (is_tuple(F) andalso is_atom(element(1,F))))). -define(is_string(S), (is_list(S) andalso is_integer(hd(S)))). %%---------------------------------------------------------------------- %% Records %%---------------------------------------------------------------------- %% Client state -record(state, {host, port, connection, % #connection capabilities, session_id, msg_id = 1, hello_status, buff = <<>>, pending = [], % [#pending] event_receiver}).% pid %% Run-time client options. -record(options, {ssh = [], % Options for the ssh application host, port = ?DEFAULT_PORT, timeout = ?DEFAULT_TIMEOUT, name}). %% Connection reference -record(connection, {reference, % {CM,Ch} host, port, name}). %% Pending replies from server -record(pending, {tref, % timer ref (returned from timer:xxx) ref, % pending ref msg_id, op, caller}).% pid which sent the request %%---------------------------------------------------------------------- %% Type declarations %%---------------------------------------------------------------------- -type client() :: handle() | server_id() | target_name(). -type handle() :: term(). %% An opaque reference for a connection (netconf session). See {@link %% ct} for more information. -type server_id() :: atom(). %% A `ServerId' which exists in a configuration file. -type target_name() :: atom(). %% A name which is associated to a `server_id()' via a %% `require' statement or a call to {@link ct:require/2} in the %% test suite. -type key_or_name() :: server_id() | target_name(). -type options() :: [option()]. %% Options used for setting up ssh connection to a netconf server. -type option() :: {ssh,host()} | {port,inet:port_number()} | {user,string()} | {password,string()} | {user_dir,string()} | {timeout,timeout()}. -type host() :: inet:host_name() | inet:ip_address(). -type notification() :: {notification, xml_attributes(), notification_content()}. -type notification_content() :: [event_time()|simple_xml()]. -type event_time() :: {eventTime,xml_attributes(),[xs_datetime()]}. -type stream_name() :: string(). -type streams() :: [{stream_name(),[stream_data()]}]. -type stream_data() :: {description,string()} | {replaySupport,string()} | {replayLogCreationTime,string()} | {replayLogAgedTime,string()}. %% See XML Schema for Event Notifications found in RFC5277 for further %% detail about the data format for the string values. -type hook_options() :: [hook_option()]. %% Options that can be given to `cth_conn_log' in the `ct_hook' statement. -type hook_option() :: {log_type,log_type()} | {hosts,[key_or_name()]}. -type log_type() :: raw | pretty | html | silent. %-type error_handler() :: module(). -type conn_mod() :: ct_netconfc. -type error_reason() :: term(). -type simple_xml() :: {xml_tag(), xml_attributes(), xml_content()} | {xml_tag(), xml_content()} | xml_tag(). %%

This type is further described in the documentation for the %% Xmerl application.

-type xml_tag() :: atom(). -type xml_attributes() :: [{xml_attribute_tag(),xml_attribute_value()}]. -type xml_attribute_tag() :: atom(). -type xml_attribute_value() :: string(). -type xml_content() :: [simple_xml() | iolist()]. -type xpath() :: {xpath,string()}. -type netconf_db() :: running | startup | candidate. -type xs_datetime() :: string(). %% This date and time identifyer has the same format as the XML type %% dateTime and compliant to RFC3339. The format is %% ```[-]CCYY-MM-DDThh:mm:ss[.s][Z|(+|-)hh:mm]''' %%---------------------------------------------------------------------- %% External interface functions %%---------------------------------------------------------------------- %%---------------------------------------------------------------------- -spec open(Options) -> Result when Options :: options(), Result :: {ok,handle()} | {error,error_reason()}. %% @doc Open a netconf session and exchange `hello' messages. %% %% If the server options are specified in a configuration file, or if %% a named client is needed for logging purposes (see {@section %% Logging}) use {@link open/2} instead. %% %% The opaque `handler()' reference which is returned from this %% function is required as client identifier when calling any other %% function in this module. %% %% The `timeout' option (milli seconds) is used when setting up %% the ssh connection and when waiting for the hello message from the %% server. It is not used for any other purposes during the lifetime %% of the connection. %% %% @end %%---------------------------------------------------------------------- open(Options) -> open(Options,#options{},[],true). %%---------------------------------------------------------------------- -spec open(KeyOrName, ExtraOptions) -> Result when KeyOrName :: key_or_name(), ExtraOptions :: options(), Result :: {ok,handle()} | {error,error_reason()}. %% @doc Open a named netconf session and exchange `hello' messages. %% %% If `KeyOrName' is a configured `server_id()' or a %% `target_name()' associated with such an ID, then the options %% for this server will be fetched from the configuration file. % %% The `ExtraOptions' argument will be added to the options found in %% the configuration file. If the same options are given, the values %% from the configuration file will overwrite `ExtraOptions'. %% %% If the server is not specified in a configuration file, use {@link %% open/1} instead. %% %% The opaque `handle()' reference which is returned from this %% function can be used as client identifier when calling any other %% function in this module. However, if `KeyOrName' is a %% `target_name()', i.e. if the server is named via a call to %% `ct:require/2' or a `require' statement in the test %% suite, then this name may be used instead of the `handle()'. %% %% The `timeout' option (milli seconds) is used when setting up %% the ssh connection and when waiting for the hello message from the %% server. It is not used for any other purposes during the lifetime %% of the connection. %% %% @see ct:require/2 %% @end %%---------------------------------------------------------------------- open(KeyOrName, ExtraOpts) -> open(KeyOrName, ExtraOpts, true). open(KeyOrName, ExtraOpts, Hello) -> SortedExtra = lists:keysort(1,ExtraOpts), SortedConfig = lists:keysort(1,ct:get_config(KeyOrName,[])), AllOpts = lists:ukeymerge(1,SortedConfig,SortedExtra), open(AllOpts,#options{name=KeyOrName},[{name,KeyOrName}],Hello). open(OptList,InitOptRec,NameOpt,Hello) -> case check_options(OptList,undefined,undefined,InitOptRec) of {Host,Port,Options} -> case ct_gen_conn:start({Host,Port},Options,?MODULE, NameOpt ++ [{reconnect,false}, {use_existing_connection,false}, {forward_messages,true}]) of {ok,Client} when Hello==true -> case hello(Client,Options#options.timeout) of ok -> {ok,Client}; Error -> Error end; Other -> Other end; Error -> Error end. %%---------------------------------------------------------------------- -spec only_open(Options) -> Result when Options :: options(), Result :: {ok,handle()} | {error,error_reason()}. %% @doc Open a netconf session, but don't send `hello'. %% %% As {@link open/1} but does not send a `hello' message. %% %% @end %%---------------------------------------------------------------------- only_open(Options) -> open(Options,#options{},[],false). %%---------------------------------------------------------------------- -spec only_open(KeyOrName,ExtraOptions) -> Result when KeyOrName :: key_or_name(), ExtraOptions :: options(), Result :: {ok,handle()} | {error,error_reason()}. %% @doc Open a name netconf session, but don't send `hello'. %% %% As {@link open/2} but does not send a `hello' message. %% %% @end %%---------------------------------------------------------------------- only_open(KeyOrName, ExtraOpts) -> open(KeyOrName, ExtraOpts, false). %%---------------------------------------------------------------------- %% @spec hello(Client) -> Result %% @equiv hello(Client, infinity) hello(Client) -> hello(Client,?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec hello(Client,Timeout) -> Result when Client :: handle(), Timeout :: timeout(), Result :: ok | {error,error_reason()}. %% @doc Exchange `hello' messages with the server. %% %% Sends a `hello' message to the server and waits for the return. %% %% @end %%---------------------------------------------------------------------- hello(Client,Timeout) -> call(Client, {hello, Timeout}). %%---------------------------------------------------------------------- %% @spec get_session_id(Client) -> Result %% @equiv get_session_id(Client, infinity) get_session_id(Client) -> get_session_id(Client, ?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec get_session_id(Client, Timeout) -> Result when Client :: client(), Timeout :: timeout(), Result :: pos_integer() | {error,error_reason()}. %% @doc Returns the session id associated with the given client. %% %% @end %%---------------------------------------------------------------------- get_session_id(Client, Timeout) -> call(Client, get_session_id, Timeout). %%---------------------------------------------------------------------- %% @spec get_capabilities(Client) -> Result %% @equiv get_capabilities(Client, infinity) get_capabilities(Client) -> get_capabilities(Client, ?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec get_capabilities(Client, Timeout) -> Result when Client :: client(), Timeout :: timeout(), Result :: [string()] | {error,error_reason()}. %% @doc Returns the server side capabilities %% %% The following capability identifiers, defined in RFC 4741, can be returned: %% %% %% %% Note, additional identifiers may exist, e.g. server side namespace. %% %% @end %%---------------------------------------------------------------------- get_capabilities(Client, Timeout) -> call(Client, get_capabilities, Timeout). %% @private send(Client, SimpleXml) -> send(Client, SimpleXml, ?DEFAULT_TIMEOUT). %% @private send(Client, SimpleXml, Timeout) -> call(Client,{send, Timeout, SimpleXml}). %% @private send_rpc(Client, SimpleXml) -> send_rpc(Client, SimpleXml, ?DEFAULT_TIMEOUT). %% @private send_rpc(Client, SimpleXml, Timeout) -> call(Client,{send_rpc, SimpleXml, Timeout}). %%---------------------------------------------------------------------- %% @spec lock(Client, Target) -> Result %% @equiv lock(Client, Target, infinity) lock(Client, Target) -> lock(Client, Target,?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec lock(Client, Target, Timeout) -> Result when Client :: client(), Target :: netconf_db(), Timeout :: timeout(), Result :: ok | {error,error_reason()}. %% @doc Unlock configuration target. %% %% Which target parameters that can be used depends on if %% `:candidate' and/or `:startup' are supported by the %% server. If successfull, the configuration system of the device is %% not available to other clients (Netconf, CORBA, SNMP etc). Locks %% are intended to be short-lived. %% %% The operations {@link kill_session/2} or {@link kill_session/3} can %% be used to force the release of a lock owned by another Netconf %% session. How this is achieved by the server side is implementation %% specific. %% %% @end %%---------------------------------------------------------------------- lock(Client, Target, Timeout) -> call(Client,{send_rpc_op,lock,[Target],Timeout}). %%---------------------------------------------------------------------- %% @spec unlock(Client, Target) -> Result %% @equiv unlock(Client, Target, infinity) unlock(Client, Target) -> unlock(Client, Target,?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec unlock(Client, Target, Timeout) -> Result when Client :: client(), Target :: netconf_db(), Timeout :: timeout(), Result :: ok | {error,error_reason()}. %% @doc Unlock configuration target. %% %% If the client earlier has aquired a lock, via {@link lock/2} or %% {@link lock/3}, this operation release the associated lock. To be %% able to access another target than `running', the server must %% support `:candidate' and/or `:startup'. %% %% @end %%---------------------------------------------------------------------- unlock(Client, Target, Timeout) -> call(Client, {send_rpc_op, unlock, [Target], Timeout}). %%---------------------------------------------------------------------- %% @spec get(Client, Filter) -> Result %% @equiv get(Client, Filter, infinity) get(Client, Filter) -> get(Client, Filter, ?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec get(Client, Filter, Timeout) -> Result when Client :: client(), Filter :: simple_xml() | xpath(), Timeout :: timeout(), Result :: {ok,simple_xml()} | {error,error_reason()}. %% @doc Get data. %% %% This operation returns both configuration and state data from the %% server. %% %% Filter type `xpath' can only be used if the server supports %% `:xpath'. %% %% @end %%---------------------------------------------------------------------- get(Client, Filter, Timeout) -> call(Client,{send_rpc_op, get, [Filter], Timeout}). %%---------------------------------------------------------------------- %% @spec get_config(Client, Source, Filter) -> Result %% @equiv get_config(Client, Source, Filter, infinity) get_config(Client, Source, Filter) -> get_config(Client, Source, Filter, ?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec get_config(Client, Source, Filter, Timeout) -> Result when Client :: client(), Source :: netconf_db(), Filter :: simple_xml() | xpath(), Timeout :: timeout(), Result :: {ok,simple_xml()} | {error,error_reason()}. %% @doc Get configuration data. %% %% To be able to access another source than `running', the server %% must advertise `:candidate' and/or `:startup'. %% %% Filter type `xpath' can only be used if the server supports %% `:xpath'. %% %% %% @end %%---------------------------------------------------------------------- get_config(Client, Source, Filter, Timeout) -> call(Client, {send_rpc_op, get_config, [Source, Filter], Timeout}). %%---------------------------------------------------------------------- %% @spec edit_config(Client, Target, Config) -> Result %% @equiv edit_config(Client, Target, Config, infinity) edit_config(Client, Target, Config) -> edit_config(Client, Target, Config, ?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec edit_config(Client, Target, Config, Timeout) -> Result when Client :: client(), Target :: netconf_db(), Config :: simple_xml(), Timeout :: timeout(), Result :: ok | {error,error_reason()}. %% @doc Edit configuration data. %% %% Per default only the running target is available, unless the server %% include `:candidate' or `:startup' in its list of %% capabilities. %% %% @end %%---------------------------------------------------------------------- edit_config(Client, Target, Config, Timeout) -> call(Client, {send_rpc_op, edit_config, [Target,Config], Timeout}). %%---------------------------------------------------------------------- %% @spec delete_config(Client, Target) -> Result %% @equiv delete_config(Client, Target, infinity) delete_config(Client, Target) -> delete_config(Client, Target, ?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec delete_config(Client, Target, Timeout) -> Result when Client :: client(), Target :: startup | candidate, Timeout :: timeout(), Result :: ok | {error,error_reason()}. %% @doc Delete configuration data. %% %% The running configuration cannot be deleted and `:candidate' %% or `:startup' must be advertised by the server. %% %% @end %%---------------------------------------------------------------------- delete_config(Client, Target, Timeout) when Target == startup; Target == candidate -> call(Client,{send_rpc_op, delete_config, [Target], Timeout}). %%---------------------------------------------------------------------- %% @spec copy_config(Client, Source, Target) -> Result %% @equiv copy_config(Client, Source, Target, infinity) copy_config(Client, Source, Target) -> copy_config(Client, Source, Target, ?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec copy_config(Client, Target, Source, Timeout) -> Result when Client :: client(), Target :: netconf_db(), Source :: netconf_db(), Timeout :: timeout(), Result :: ok | {error,error_reason()}. %% @doc Copy configuration data. %% %% Which source and target options that can be issued depends on the %% capabilities supported by the server. I.e. `:candidate' and/or %% `:startup' are required. %% %% @end %%---------------------------------------------------------------------- copy_config(Client, Target, Source, Timeout) -> call(Client,{send_rpc_op, copy_config, [Target, Source], Timeout}). %%---------------------------------------------------------------------- %% @spec action(Client, Action) -> Result %% @equiv action(Client, Action, infinity) action(Client,Action) -> action(Client,Action,?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec action(Client, Action, Timeout) -> Result when Client :: client(), Action :: simple_xml(), Timeout :: timeout(), Result :: {ok,simple_xml()} | {error,error_reason()}. %% @doc Execute an action. %% %% @end %%---------------------------------------------------------------------- action(Client,Action,Timeout) -> call(Client,{send_rpc_op, action, [Action], Timeout}). %%---------------------------------------------------------------------- create_subscription(Client) -> create_subscription(Client,?DEFAULT_STREAM,?DEFAULT_TIMEOUT). create_subscription(Client,Timeout) when ?is_timeout(Timeout) -> create_subscription(Client,?DEFAULT_STREAM,Timeout); create_subscription(Client,Stream) when is_list(Stream) -> create_subscription(Client,Stream,?DEFAULT_TIMEOUT); create_subscription(Client,Filter) when ?is_filter(Filter) -> create_subscription(Client,?DEFAULT_STREAM,Filter, ?DEFAULT_TIMEOUT). create_subscription(Client,Stream,Timeout) when is_list(Stream) andalso ?is_timeout(Timeout) -> call(Client,{send_rpc_op,{create_subscription,self()}, [Stream,undefined,undefined,undefined], Timeout}); create_subscription(Client,StartTime,StopTime) when is_list(StartTime) andalso is_list(StopTime) -> create_subscription(Client,?DEFAULT_STREAM,StartTime,StopTime, ?DEFAULT_TIMEOUT); create_subscription(Client,Filter,Timeout) when ?is_filter(Filter) andalso ?is_timeout(Timeout) -> create_subscription(Client,?DEFAULT_STREAM,Filter,Timeout); create_subscription(Client,Stream,Filter) when is_list(Stream) andalso ?is_filter(Filter) -> create_subscription(Client,Stream,Filter,?DEFAULT_TIMEOUT). create_subscription(Client,StartTime,StopTime,Timeout) when is_list(StartTime) andalso is_list(StopTime) andalso ?is_timeout(Timeout) -> create_subscription(Client,?DEFAULT_STREAM,StartTime,StopTime,Timeout); create_subscription(Client,Stream,StartTime,StopTime) when is_list(Stream) andalso is_list(StartTime) andalso is_list(StopTime) -> create_subscription(Client,Stream,StartTime,StopTime,?DEFAULT_TIMEOUT); create_subscription(Client,Filter,StartTime,StopTime) when ?is_filter(Filter) andalso is_list(StartTime) andalso is_list(StopTime) -> create_subscription(Client,?DEFAULT_STREAM,Filter, StartTime,StopTime,?DEFAULT_TIMEOUT); create_subscription(Client,Stream,Filter,Timeout) when is_list(Stream) andalso ?is_filter(Filter) andalso ?is_timeout(Timeout) -> call(Client,{send_rpc_op,{create_subscription,self()}, [Stream,Filter,undefined,undefined], Timeout}). create_subscription(Client,Stream,StartTime,StopTime,Timeout) when is_list(Stream) andalso is_list(StartTime) andalso is_list(StopTime) andalso ?is_timeout(Timeout) -> call(Client,{send_rpc_op,{create_subscription,self()}, [Stream,undefined,StartTime,StopTime], Timeout}); create_subscription(Client,Stream,Filter,StartTime,StopTime) when is_list(Stream) andalso ?is_filter(Filter) andalso is_list(StartTime) andalso is_list(StopTime) -> create_subscription(Client,Stream,Filter,StartTime,StopTime,?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec create_subscription(Client, Stream, Filter,StartTime, StopTime, Timeout) -> Result when Client :: client(), Stream :: stream_name(), Filter :: simple_xml(), StartTime :: xs_datetime(), StopTime :: xs_datetime(), Timeout :: timeout(), Result :: ok | {error,error_reason()}. %% @doc Create a subscription for event notifications. %% %% This function sets up a subscription for netconf event %% notifications of the given stream type, matching the given %% filter. The calling process will receive notifications as messages %% of type `notification()'. %% %%
%%
Stream:
%%
An optional parameter that indicates which stream of events %% is of interest. If not present, events in the default NETCONF %% stream will be sent.
%% %%
Filter:
%%
An optional parameter that indicates which subset of all %% possible events is of interest. The format of this parameter is %% the same as that of the filter parameter in the NETCONF protocol %% operations. If not present, all events not precluded by other %% parameters will be sent. See section 3.6 for more information on %% filters.
%% %%
StartTime:
%%
An optional parameter used to trigger the replay feature and %% indicate that the replay should start at the time specified. If %% `StartTime' is not present, this is not a replay subscription. %% It is not valid to specify start times that are later than the %% current time. If the `StartTime' specified is earlier than the %% log can support, the replay will begin with the earliest %% available notification. This parameter is of type dateTime and %% compliant to [RFC3339]. Implementations must support time %% zones.
%% %%
StopTime:
%%
An optional parameter used with the optional replay feature %% to indicate the newest notifications of interest. If `StopTime' %% is not present, the notifications will continue until the %% subscription is terminated. Must be used with and be later than %% `StartTime'. Values of `StopTime' in the future are valid. This %% parameter is of type dateTime and compliant to [RFC3339]. %% Implementations must support time zones.
%%
%% %% See RFC5277 for further details about the event notification %% mechanism. %% %% @end %%---------------------------------------------------------------------- create_subscription(Client,Stream,Filter,StartTime,StopTime,Timeout) -> call(Client,{send_rpc_op,{create_subscription, self()}, [Stream,Filter,StartTime,StopTime], Timeout}). %%---------------------------------------------------------------------- %% @spec get_event_streams(Client, Timeout) -> Result %% @equiv get_event_streams(Client, [], Timeout) get_event_streams(Client,Timeout) when is_integer(Timeout); Timeout==infinity -> get_event_streams(Client,[],Timeout); %%---------------------------------------------------------------------- %% @spec get_event_streams(Client, Streams) -> Result %% @equiv get_event_streams(Client, Streams, infinity) get_event_streams(Client,Streams) when is_list(Streams) -> get_event_streams(Client,Streams,?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec get_event_streams(Client, Streams, Timeout) -> Result when Client :: client(), Streams :: [stream_name()], Timeout :: timeout(), Result :: {ok,streams()} | {error,error_reason()}. %% @doc Send a request to get the given event streams. %% %% `Streams' is a list of stream names. The following filter will %% be sent to the netconf server in a `get' request: %% %% ``` %% %% %% %% StreamName1 %% %% %% StreamName2 %% %% ... %% %% %% ''' %% %% If `Streams' is an empty list, ALL streams will be requested %% by sending the following filter: %% %% ``` %% %% %% %% ''' %% %% If more complex filtering is needed, a use {@link get/2} or {@link %% get/3} and specify the exact filter according to XML Schema for %% Event Notifications found in RFC5277. %% %% @end %%---------------------------------------------------------------------- get_event_streams(Client,Streams,Timeout) -> call(Client,{get_event_streams,Streams,Timeout}). %%---------------------------------------------------------------------- %% @spec close_session(Client) -> Result %% @equiv close_session(Client, infinity) close_session(Client) -> close_session(Client, ?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec close_session(Client, Timeout) -> Result when Client :: client(), Timeout :: timeout(), Result :: ok | {error,error_reason()}. %% @doc Request graceful termination of the session associated with the client. %% %% When a netconf server receives a `close-session' request, it %% will gracefully close the session. The server will release any %% locks and resources associated with the session and gracefully %% close any associated connections. Any NETCONF requests received %% after a `close-session' request will be ignored. %% %% @end %%---------------------------------------------------------------------- close_session(Client, Timeout) -> call(Client,{send_rpc_op, close_session, [], Timeout}). %%---------------------------------------------------------------------- %% @spec kill_session(Client, SessionId) -> Result %% @equiv kill_session(Client, SessionId, infinity) kill_session(Client, SessionId) -> kill_session(Client, SessionId, ?DEFAULT_TIMEOUT). %%---------------------------------------------------------------------- -spec kill_session(Client, SessionId, Timeout) -> Result when Client :: client(), SessionId :: pos_integer(), Timeout :: timeout(), Result :: ok | {error,error_reason()}. %% @doc Force termination of the session associated with the supplied %% session id. %% %% The server side shall abort any operations currently in process, %% release any locks and resources associated with the session, and %% close any associated connections. %% %% Only if the server is in the confirmed commit phase, the %% configuration will be restored to its state before entering the %% confirmed commit phase. Otherwise, no configuration roll back will %% be performed. %% %% If the given `SessionId' is equal to the current session id, %% an error will be returned. %% %% @end %% ---------------------------------------------------------------------- kill_session(Client, SessionId, Timeout) -> call(Client,{send_rpc_op, kill_session, [SessionId], Timeout}). %%---------------------------------------------------------------------- %% Callback functions %%---------------------------------------------------------------------- %% @private init(_KeyOrName,{_Host,_Port},Options) -> case ssh_open(Options) of {ok, Connection} -> log(Connection,open), {ConnPid,_} = Connection#connection.reference, {ok, ConnPid, #state{connection = Connection}}; {error,Reason}-> {error,Reason} end. %% @private terminate(_, #state{connection=Connection}) -> ssh_close(Connection), log(Connection,close), ok. %% @private handle_msg({hello,Timeout}, From, #state{connection=Connection,hello_status=HelloStatus} = State) -> case do_send(Connection, client_hello()) of ok -> case HelloStatus of undefined -> {Ref,TRef} = set_request_timer(Timeout), {noreply, State#state{hello_status=#pending{tref=TRef, ref=Ref, caller=From}}}; received -> {reply, ok, State#state{hello_status=done}}; {error,Reason} -> {stop, {error,Reason}, State} end; Error -> {stop, Error, State} end; handle_msg(_, _From, #state{session_id=undefined} = State) -> %% Hello is not yet excanged - this shall never happen {reply,{error,waiting_for_hello},State}; handle_msg(get_capabilities, _From, #state{capabilities = Caps} = State) -> {reply, Caps, State}; handle_msg(get_session_id, _From, #state{session_id = Id} = State) -> {reply, Id, State}; handle_msg({send, Timeout, SimpleXml}, From, #state{connection=Connection,pending=Pending} = State) -> case do_send(Connection, SimpleXml) of ok -> {Ref,TRef} = set_request_timer(Timeout), {noreply, State#state{pending=[#pending{tref=TRef, ref=Ref, caller=From} | Pending]}}; Error -> {reply, Error, State} end; handle_msg({send_rpc, SimpleXml, Timeout}, From, State) -> do_send_rpc(undefined, SimpleXml, Timeout, From, State); handle_msg({send_rpc_op, Op, Data, Timeout}, From, State) -> SimpleXml = encode_rpc_operation(Op,Data), do_send_rpc(Op, SimpleXml, Timeout, From, State); handle_msg({get_event_streams=Op,Streams,Timeout}, From, State) -> Filter = {netconf,?NETMOD_NOTIF_NAMESPACE_ATTR, [{streams,[{stream,[{name,[Name]}]} || Name <- Streams]}]}, SimpleXml = encode_rpc_operation(get,[Filter]), do_send_rpc(Op, SimpleXml, Timeout, From, State). handle_msg({ssh_cm, _CM, {data, _Ch, _Type, Data}}, State) -> handle_data(Data, State); handle_msg({ssh_cm, _CM, _SshCloseMsg}, State) -> %% _SshCloseMsg can probably be one of %% {eof,Ch} %% {exit_status,Ch,Status} %% {exit_signal,Ch,ExitSignal,ErrorMsg,LanguageString} %% {signal,Ch,Signal} %% This might e.g. happen if the server terminates the connection, %% as in kill-session (or if ssh:close is called from somewhere %% unexpected). %%! Log this?? %%! Currently the log will say that the client closed the %%! connection - due to terminate/2 {stop, State}; handle_msg({Ref,timeout}, #state{hello_status=#pending{ref=Ref,caller=Caller}} = State) -> ct_gen_conn:return(Caller,{error,{hello_session_failed,timeout}}), {stop,State#state{hello_status={error,timeout}}}; handle_msg({Ref,timeout},#state{pending=Pending} = State) -> {value,#pending{caller=Caller},Pending1} = lists:keytake(Ref,#pending.ref,Pending), ct_gen_conn:return(Caller,{error,timeout}), {noreply,State#state{pending=Pending1}}. %% @private %% Called by ct_util_server to close registered connections before terminate. close(Client) -> case get_handle(Client) of {ok,Pid} -> case ct_gen_conn:stop(Pid) of {error,{process_down,Pid,noproc}} -> {error,already_closed}; Result -> Result end; Error -> Error end. %%---------------------------------------------------------------------- %% Internal functions %%---------------------------------------------------------------------- call(Client, Msg) -> call(Client, Msg, infinity). call(Client, Msg, Timeout) -> case get_handle(Client) of {ok,Pid} -> case ct_gen_conn:call(Pid,Msg,Timeout) of {error,{process_down,Client,noproc}} -> {error,no_such_client}; {error,{process_down,Client,normal}} -> {error,closed}; {error,{process_down,Client,Reason}} -> {error,{closed,Reason}}; Other -> Other end; Error -> Error end. get_handle(Client) when is_pid(Client) -> {ok,Client}; get_handle(Client) -> case ct_util:get_connections(Client, ?MODULE) of {ok,[{Pid,_}]} -> {ok,Pid}; {ok,[]} -> {error,{no_connection_found,Client}}; {ok,Conns} -> {error,{multiple_connections_found,Client,Conns}}; Error -> Error end. check_options([], undefined, _Port, _Options) -> {error, no_host_address}; check_options([], _Host, undefined, _Options) -> {error, no_port}; check_options([], Host, Port, Options) -> {Host,Port,Options}; check_options([{ssh, Host}|T], _, Port, #options{} = Options) -> check_options(T, Host, Port, Options#options{host=Host}); check_options([{port,Port}|T], Host, _, #options{} = Options) -> check_options(T, Host, Port, Options#options{port=Port}); check_options([{timeout, Timeout}|T], Host, Port, Options) when is_integer(Timeout); Timeout==infinity -> check_options(T, Host, Port, Options#options{timeout = Timeout}); check_options([{X,_}=Opt|T], Host, Port, #options{ssh=SshOpts}=Options) -> case lists:member(X,?VALID_SSH_OPTS) of true -> check_options(T, Host, Port, Options#options{ssh=[Opt|SshOpts]}); false -> {error, {invalid_option, Opt}} end. %%%----------------------------------------------------------------- set_request_timer(infinity) -> {undefined,undefined}; set_request_timer(T) -> Ref = make_ref(), {ok,TRef} = timer:send_after(T,{Ref,timeout}), {Ref,TRef}. %%%----------------------------------------------------------------- client_hello() -> {hello, ?NETCONF_NAMESPACE_ATTR, [{capabilities, [{capability,[?NETCONF_BASE_CAP++?NETCONF_BASE_CAP_VSN]}]}]}. %%%----------------------------------------------------------------- encode_rpc_operation(Lock,[Target]) when Lock==lock; Lock==unlock -> {Lock,[{target,[Target]}]}; encode_rpc_operation(get,[Filter]) -> {get,filter(Filter)}; encode_rpc_operation(get_config,[Source,Filter]) -> {'get-config',[{source,[Source]}] ++ filter(Filter)}; encode_rpc_operation(edit_config,[Target,Config]) -> {'edit-config',[{target,[Target]},{config,[Config]}]}; encode_rpc_operation(delete_config,[Target]) -> {'delete-config',[{target,[Target]}]}; encode_rpc_operation(copy_config,[Target,Source]) -> {'copy-config',[{target,[Target]},{source,[Source]}]}; encode_rpc_operation(action,[Action]) -> {action,?ACTION_NAMESPACE_ATTR,[{data,[Action]}]}; encode_rpc_operation(kill_session,[SessionId]) -> {'kill-session',[{'session-id',[integer_to_list(SessionId)]}]}; encode_rpc_operation(close_session,[]) -> 'close-session'; encode_rpc_operation({create_subscription,_}, [Stream,Filter,StartTime,StopTime]) -> {'create-subscription',?NETCONF_NOTIF_NAMESPACE_ATTR, [{stream,[Stream]}] ++ filter(Filter) ++ maybe_element(startTime,StartTime) ++ maybe_element(stopTime,StopTime)}. filter(undefined) -> []; filter({xpath,Filter}) when ?is_string(Filter) -> [{filter,[{type,"xpath"},{select, Filter}],[]}]; filter(Filter) -> [{filter,[{type,"subtree"}],[Filter]}]. maybe_element(_,undefined) -> []; maybe_element(Tag,Value) -> [{Tag,[Value]}]. %%%----------------------------------------------------------------- %%% Send XML data to server do_send_rpc(PendingOp,SimpleXml,Timeout,Caller, #state{connection=Connection,msg_id=MsgId,pending=Pending} = State) -> case do_send_rpc(Connection, MsgId, SimpleXml) of ok -> {Ref,TRef} = set_request_timer(Timeout), {noreply, State#state{msg_id=MsgId+1, pending=[#pending{tref=TRef, ref=Ref, msg_id=MsgId, op=PendingOp, caller=Caller} | Pending]}}; Error -> {reply, Error, State#state{msg_id=MsgId+1}} end. do_send_rpc(Connection, MsgId, SimpleXml) -> do_send(Connection, {rpc, [{'message-id',MsgId} | ?NETCONF_NAMESPACE_ATTR], [SimpleXml]}). do_send(Connection, SimpleXml) -> Xml=to_xml_doc(SimpleXml), log(Connection,send,Xml), ssh_send(Connection, Xml). to_xml_doc(Simple) -> Prolog = "", Xml = list_to_binary(xmerl:export_simple([Simple], xmerl_xml, [#xmlAttribute{name=prolog, value=Prolog}])), <>. %%%----------------------------------------------------------------- %%% Parse and handle received XML data handle_data(NewData,#state{connection=Connection,buff=Buff} = State) -> log(Connection,recv,NewData), Data = <>, case xmerl_sax_parser:stream(<<>>, [{continuation_fun,fun sax_cont/1}, {continuation_state,{Data,Connection,false}}, {event_fun,fun sax_event/3}, {event_state,[]}]) of {ok, Simple, Rest} -> decode(Simple,State#state{buff=Rest}); {fatal_error,_Loc,Reason,_EndTags,_EventState} -> ?error(Connection#connection.name,[{parse_error,Reason}, {data,Data}]), case Reason of {could_not_fetch_data,Msg} -> handle_msg(Msg,State#state{buff = <<>>}); _Other -> Pending1 = case State#state.pending of [] -> []; Pending -> %% Assuming the first request gets the %% first answer P=#pending{tref=TRef,caller=Caller} = lists:last(Pending), timer:cancel(TRef), Reason1 = {failed_to_parse_received_data,Reason}, ct_gen_conn:return(Caller,{error,Reason1}), lists:delete(P,Pending) end, {noreply,State#state{pending=Pending1,buff = <<>>}} end end. %%%----------------------------------------------------------------- %%% Parsing of XML data %% Contiuation function for the sax parser sax_cont(done) -> {<<>>,done}; sax_cont({Data,Connection,false}) -> case binary:split(Data,[?END_TAG],[]) of [All] -> %% No end tag found. Remove what could be a part %% of an end tag from the data and save for next %% iteration SafeSize = size(All)-5, <> = All, {New,{Save,Connection,true}}; [_Msg,_Rest]=Msgs -> %% We have at least one full message. Any excess data will %% be returned from xmerl_sax_parser:stream/2 in the Rest %% parameter. {list_to_binary(Msgs),done} end; sax_cont({Data,Connection,true}) -> case ssh_receive_data() of {ok,Bin} -> log(Connection,recv,Bin), sax_cont({<>,Connection,false}); {error,Reason} -> throw({could_not_fetch_data,Reason}) end. %% Event function for the sax parser. It builds a simple XML structure. %% Care is taken to keep namespace attributes and prefixes as in the original XML. sax_event(Event,_Loc,State) -> sax_event(Event,State). sax_event({startPrefixMapping, Prefix, Uri},Acc) -> %% startPrefixMapping will always come immediately before the %% startElement where the namespace is defined. [{xmlns,{Prefix,Uri}}|Acc]; sax_event({startElement,_Uri,_Name,QN,Attrs},Acc) -> %% Pick out any namespace attributes inserted due to a %% startPrefixMapping event.The rest of Acc will then be only %% elements. {NsAttrs,NewAcc} = split_attrs_and_elements(Acc,[]), Tag = qn_to_tag(QN), [{Tag,NsAttrs ++ parse_attrs(Attrs),[]}|NewAcc]; sax_event({endElement,_Uri,_Name,_QN},[{Name,Attrs,Cont},{Parent,PA,PC}|Acc]) -> [{Parent,PA,[{Name,Attrs,lists:reverse(Cont)}|PC]}|Acc]; sax_event(endDocument,[{Tag,Attrs,Cont}]) -> {Tag,Attrs,lists:reverse(Cont)}; sax_event({characters,String},[{Name,Attrs,Cont}|Acc]) -> [{Name,Attrs,[String|Cont]}|Acc]; sax_event(_Event,State) -> State. split_attrs_and_elements([{xmlns,{Prefix,Uri}}|Rest],Attrs) -> split_attrs_and_elements(Rest,[{xmlnstag(Prefix),Uri}|Attrs]); split_attrs_and_elements(Elements,Attrs) -> {Attrs,Elements}. xmlnstag([]) -> xmlns; xmlnstag(Prefix) -> list_to_atom("xmlns:"++Prefix). qn_to_tag({[],Name}) -> list_to_atom(Name); qn_to_tag({Prefix,Name}) -> list_to_atom(Prefix ++ ":" ++ Name). parse_attrs([{_Uri, [], Name, Value}|Attrs]) -> [{list_to_atom(Name),Value}|parse_attrs(Attrs)]; parse_attrs([{_Uri, Prefix, Name, Value}|Attrs]) -> [{list_to_atom(Prefix ++ ":" ++ Name),Value}|parse_attrs(Attrs)]; parse_attrs([]) -> []. %%%----------------------------------------------------------------- %%% Decoding of parsed XML data decode({Tag,Attrs,_}=E, #state{connection=Connection,pending=Pending}=State) -> ConnName = Connection#connection.name, case get_local_name_atom(Tag) of 'rpc-reply' -> case get_msg_id(Attrs) of undefined -> case Pending of [#pending{msg_id=MsgId}] -> ?error(ConnName,[{warning,rpc_reply_missing_msg_id}, {assuming,MsgId}]), decode_rpc_reply(MsgId,E,State); _ -> ?error(ConnName,[{error,rpc_reply_missing_msg_id}]), {noreply,State} end; MsgId -> decode_rpc_reply(MsgId,E,State) end; hello -> case State#state.hello_status of undefined -> case decode_hello(E) of {ok,SessionId,Capabilities} -> {noreply,State#state{session_id = SessionId, capabilities = Capabilities, hello_status = received}}; {error,Reason} -> {noreply,State#state{hello_status = {error,Reason}}} end; #pending{tref=TRef,caller=Caller} -> timer:cancel(TRef), case decode_hello(E) of {ok,SessionId,Capabilities} -> ct_gen_conn:return(Caller,ok), {noreply,State#state{session_id = SessionId, capabilities = Capabilities, hello_status = done}}; {error,Reason} -> ct_gen_conn:return(Caller,{error,Reason}), {stop,State#state{hello_status={error,Reason}}} end; Other -> ?error(ConnName,[{got_unexpected_hello,E}, {hello_status,Other}]), {noreply,State} end; notification -> EventReceiver = State#state.event_receiver, EventReceiver ! E, {noreply,State}; Other -> %% Result of send/2, when not sending an rpc request - or %% if netconf server sends noise. Can handle this only if %% there is just one pending that matches (i.e. has %% undefined msg_id and op) case [P || P = #pending{msg_id=undefined,op=undefined} <- Pending] of [#pending{tref=TRef, caller=Caller}] -> timer:cancel(TRef), ct_gen_conn:return(Caller,E), {noreply,State#state{pending=[]}}; _ -> ?error(ConnName,[{got_unexpected_msg,Other}, {expecting,Pending}]), {noreply,State} end end. get_msg_id(Attrs) -> case lists:keyfind('message-id',1,Attrs) of {_,Str} -> list_to_integer(Str); false -> undefined end. decode_rpc_reply(MsgId,{_,Attrs,Content0}=E,#state{pending=Pending} = State) -> case lists:keytake(MsgId,#pending.msg_id,Pending) of {value, #pending{tref=TRef,op=Op,caller=Caller}, Pending1} -> timer:cancel(TRef), Content = forward_xmlns_attr(Attrs,Content0), {CallerReply,{ServerReply,State2}} = do_decode_rpc_reply(Op,Content,State#state{pending=Pending1}), ct_gen_conn:return(Caller,CallerReply), {ServerReply,State2}; false -> %% Result of send/2, when receiving a correct %% rpc-reply. Can handle this only if there is just one %% pending that matches (i.e. has undefined msg_id and op) case [P || P = #pending{msg_id=undefined,op=undefined} <- Pending] of [#pending{tref=TRef, msg_id=undefined, op=undefined, caller=Caller}] -> timer:cancel(TRef), ct_gen_conn:return(Caller,E), {noreply,State#state{pending=[]}}; _ -> ConnName = (State#state.connection)#connection.name, ?error(ConnName,[{got_unexpected_msg_id,MsgId}, {expecting,Pending}]), {noreply,State} end end. do_decode_rpc_reply(Op,Result,State) when Op==lock; Op==unlock; Op==edit_config; Op==delete_config; Op==copy_config; Op==kill_session -> {decode_ok(Result),{noreply,State}}; do_decode_rpc_reply(Op,Result,State) when Op==get; Op==get_config; Op==action -> {decode_data(Result),{noreply,State}}; do_decode_rpc_reply(close_session,Result,State) -> case decode_ok(Result) of ok -> {ok,{stop,State}}; Other -> {Other,{noreply,State}} end; do_decode_rpc_reply({create_subscription,Caller},Result,State) -> case decode_ok(Result) of ok -> {ok,{noreply,State#state{event_receiver=Caller}}}; Other -> {Other,{noreply,State}} end; do_decode_rpc_reply(get_event_streams,Result,State) -> {decode_streams(decode_data(Result)),{noreply,State}}; do_decode_rpc_reply(undefined,Result,State) -> {Result,{noreply,State}}. decode_ok([{Tag,Attrs,Content}]) -> case get_local_name_atom(Tag) of ok -> ok; 'rpc-error' -> {error,forward_xmlns_attr(Attrs,Content)}; _Other -> {error,{unexpected_rpc_reply,[{Tag,Attrs,Content}]}} end; decode_ok(Other) -> {error,{unexpected_rpc_reply,Other}}. decode_data([{Tag,Attrs,Content}]) -> case get_local_name_atom(Tag) of data -> %% Since content of data has nothing from the netconf %% namespace, we remove the parent's xmlns attribute here %% - just to make the result cleaner {ok,forward_xmlns_attr(remove_xmlnsattr_for_tag(Tag,Attrs),Content)}; 'rpc-error' -> {error,forward_xmlns_attr(Attrs,Content)}; _Other -> {error,{unexpected_rpc_reply,[{Tag,Attrs,Content}]}} end; decode_data(Other) -> {error,{unexpected_rpc_reply,Other}}. get_qualified_name(Tag) -> case string:tokens(atom_to_list(Tag),":") of [TagStr] -> {[],TagStr}; [PrefixStr,TagStr] -> {PrefixStr,TagStr} end. get_local_name_atom(Tag) -> {_,TagStr} = get_qualified_name(Tag), list_to_atom(TagStr). %% Remove the xmlns attr that points to the tag. I.e. if the tag has a %% prefix, remove {'xmlns:prefix',_}, else remove default {xmlns,_}. remove_xmlnsattr_for_tag(Tag,Attrs) -> {Prefix,_TagStr} = get_qualified_name(Tag), XmlnsTag = xmlnstag(Prefix), case lists:keytake(XmlnsTag,1,Attrs) of {value,_,NoNsAttrs} -> NoNsAttrs; false -> Attrs end. %% Take all xmlns attributes from the parent's attribute list and %% forward into all childrens' attribute lists. But do not overwrite %% any. forward_xmlns_attr(ParentAttrs,Children) -> do_forward_xmlns_attr(get_all_xmlns_attrs(ParentAttrs,[]),Children). do_forward_xmlns_attr(XmlnsAttrs,[{ChT,ChA,ChC}|Children]) -> ChA1 = add_xmlns_attrs(XmlnsAttrs,ChA), [{ChT,ChA1,ChC} | do_forward_xmlns_attr(XmlnsAttrs,Children)]; do_forward_xmlns_attr(_XmlnsAttrs,[]) -> []. add_xmlns_attrs([{Key,_}=A|XmlnsAttrs],ChA) -> case lists:keymember(Key,1,ChA) of true -> add_xmlns_attrs(XmlnsAttrs,ChA); false -> add_xmlns_attrs(XmlnsAttrs,[A|ChA]) end; add_xmlns_attrs([],ChA) -> ChA. get_all_xmlns_attrs([{xmlns,_}=Default|Attrs],XmlnsAttrs) -> get_all_xmlns_attrs(Attrs,[Default|XmlnsAttrs]); get_all_xmlns_attrs([{Key,_}=Attr|Attrs],XmlnsAttrs) -> case atom_to_list(Key) of "xmlns:"++_Prefix -> get_all_xmlns_attrs(Attrs,[Attr|XmlnsAttrs]); _ -> get_all_xmlns_attrs(Attrs,XmlnsAttrs) end; get_all_xmlns_attrs([],XmlnsAttrs) -> XmlnsAttrs. %% Decode server hello to pick out session id and capabilities decode_hello({hello,_Attrs,Hello}) -> case lists:keyfind('session-id',1,Hello) of {'session-id',_,[SessionId]} -> case lists:keyfind(capabilities,1,Hello) of {capabilities,_,Capabilities} -> case decode_caps(Capabilities,[],false) of {ok,Caps} -> {ok,list_to_integer(SessionId),Caps}; Error -> Error end; false -> {error,{incorrect_hello,capabilities_not_found}} end; false -> {error,{incorrect_hello,no_session_id_found}} end. decode_caps([{capability,[],[?NETCONF_BASE_CAP++Vsn=Cap]} |Caps], Acc, _) -> case Vsn of ?NETCONF_BASE_CAP_VSN -> decode_caps(Caps, [Cap|Acc], true); _ -> {error,{incompatible_base_capability_vsn,Vsn}} end; decode_caps([{capability,[],[Cap]}|Caps],Acc,Base) -> decode_caps(Caps,[Cap|Acc],Base); decode_caps([H|_T],_,_) -> {error,{unexpected_capability_element,H}}; decode_caps([],_,false) -> {error,{incorrect_hello,no_base_capability_found}}; decode_caps([],Acc,true) -> {ok,lists:reverse(Acc)}. %% Return a list of {Name,Data}, where data is a {Tag,Value} list for each stream decode_streams({error,Reason}) -> {error,Reason}; decode_streams({ok,[{netconf,_,Streams}]}) -> {ok,decode_streams(Streams)}; decode_streams([{streams,_,Streams}]) -> decode_streams(Streams); decode_streams([{stream,_,Stream} | Streams]) -> {name,_,[Name]} = lists:keyfind(name,1,Stream), [{Name,[{Tag,Value} || {Tag,_,[Value]} <- Stream, Tag /= name]} | decode_streams(Streams)]; decode_streams([]) -> []. %%%----------------------------------------------------------------- %%% Logging log(Connection,Action) -> log(Connection,Action,<<>>). log(#connection{host=Host,port=Port,name=Name},Action,Data) -> error_logger:info_report(#conn_log{client=self(), address={Host,Port}, name=Name, action=Action, module=?MODULE}, Data). %% Log callback - called from the error handler process format_data(raw,Data) -> io_lib:format("~n~s~n",[hide_password(Data)]); format_data(pretty,Data) -> io_lib:format("~n~s~n",[indent(Data)]); format_data(html,Data) -> io_lib:format("~n~s~n",[html_format(Data)]). %%%----------------------------------------------------------------- %%% Hide password elements from XML data hide_password(Bin) -> re:replace(Bin,<<"(]*>)[^<]*()">>,<<"\\1*****\\2">>, [global,{return,binary}]). %%%----------------------------------------------------------------- %%% HTML formatting html_format(Bin) -> binary:replace(indent(Bin),<<"<">>,<<"<">>,[global]). %%%----------------------------------------------------------------- %%% Indentation of XML code indent(Bin) -> String = normalize(hide_password(Bin)), IndentedString = case erase(part_of_line) of undefined -> indent1(String,[]); Part -> indent1(lists:reverse(Part)++String,erase(indent)) end, list_to_binary(IndentedString). %% Normalizes the XML document by removing all space and newline %% between two XML tags. %% Returns a list, no matter if the input was a list or a binary. normalize(Str) -> re:replace(Str,<<">[ \r\n\t]+<">>,<<"><">>,[global,{return,list}]). indent1(" %% Prolog {Line,Rest2,Indent2} = indent_line(Rest1,Indent1,[$?,$<]), Line++indent1(Rest2,Indent2); indent1(" %% Stop tag {Line,Rest2,Indent2} = indent_line1(Rest1,Indent1,[$/,$<]), "\n"++Line++indent1(Rest2,Indent2); indent1("<"++Rest1,Indent1) -> %% Start- or empty tag put(tag,get_tag(Rest1)), {Line,Rest2,Indent2} = indent_line(Rest1,Indent1,[$<]), "\n"++Line++indent1(Rest2,Indent2); indent1([H|T],Indent) -> [H|indent1(T,Indent)]; indent1([],_Indent) -> []. indent_line("?>"++Rest,Indent,Line) -> %% Prolog {lists:reverse(Line)++"?>",Rest,Indent}; indent_line("/> %% Empty tag, and stop of parent tag -> one step out in indentation {Indent++lists:reverse(Line)++"/>",""++Rest,Indent,Line) -> %% Empty tag, then probably next tag -> keep indentation {Indent++lists:reverse(Line)++"/>",Rest,Indent}; indent_line("> LastTag = erase(tag), case get_tag(Rest) of LastTag -> %% Start and stop tag, but no content indent_line1(Rest,Indent,[$/,$<,$>|Line]); _ -> %% Stop tag completed, and then stop tag of parent -> one step out {Indent++lists:reverse(Line)++">","<"++Rest,Indent,Line) -> %% Stop tag completed, and new tag comming -> keep indentation {Indent++lists:reverse(Line)++">","<"++Rest," "++Indent}; indent_line(" %% Stop tag starting -> search for end of this tag indent_line1(Rest,Indent,[$/,$<|Line]); indent_line([H|T],Indent,Line) -> indent_line(T,Indent,[H|Line]); indent_line([],Indent,Line) -> %% The line is not complete - will be continued later put(part_of_line,Line), put(indent,Indent), {[],[],Indent}. indent_line1("> %% Stop tag completed, and then stop tag of parent -> one step out {Indent++lists:reverse(Line)++">",""++Rest,Indent,Line) -> %% Stop tag completed -> keep indentation {Indent++lists:reverse(Line)++">",Rest,Indent}; indent_line1([H|T],Indent,Line) -> indent_line1(T,Indent,[H|Line]); indent_line1([],Indent,Line) -> %% The line is not complete - will be continued later put(part_of_line,Line), put(indent,Indent), {[],[],Indent}. get_tag("/>"++_) -> []; get_tag(">"++_) -> []; get_tag([H|T]) -> [H|get_tag(T)]; get_tag([]) -> %% The line is not complete - will be continued later. []. %%%----------------------------------------------------------------- %%% SSH stuff ssh_receive_data() -> receive {ssh_cm, _CM, {data, _Ch, _Type, Data}} -> {ok, Data}; {ssh_cm, _CM, {Closed, _Ch}} = X when Closed == closed; Closed == eof -> {error,X}; {_Ref,timeout} = X -> {error,X} end. ssh_open(#options{host=Host,timeout=Timeout,port=Port,ssh=SshOpts,name=Name}) -> case ssh:connect(Host, Port, [{user_interaction,false}, {silently_accept_hosts, true}|SshOpts]) of {ok,CM} -> case ssh_connection:session_channel(CM, Timeout) of {ok,Ch} -> case ssh_connection:subsystem(CM, Ch, "netconf", Timeout) of success -> {ok, #connection{reference = {CM,Ch}, host = Host, port = Port, name = Name}}; failure -> ssh:close(CM), {error,{ssh,could_not_execute_netconf_subsystem}} end; {error, Reason} -> ssh:close(CM), {error,{ssh,could_not_open_channel,Reason}}; Other -> %% Bug in ssh?? got {closed,0} here once... {error,{ssh,unexpected_from_session_channel,Other}} end; {error,Reason} -> {error,{ssh,could_not_connect_to_server,Reason}} end. ssh_send(#connection{reference = {CM,Ch}}, Data) -> case ssh_connection:send(CM, Ch, Data) of ok -> ok; {error,Reason} -> {error,{ssh,failed_to_send_data,Reason}} end. ssh_close(#connection{reference = {CM,_Ch}}) -> ssh:close(CM). %%---------------------------------------------------------------------- %% END OF MODULE %%----------------------------------------------------------------------