%% %% %CopyrightBegin% %% %% Copyright Ericsson AB 2009-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. %% You may obtain a copy of the License at %% %% http://www.apache.org/licenses/LICENSE-2.0 %% %% Unless required by applicable law or agreed to in writing, software %% distributed under the License is distributed on an "AS IS" BASIS, %% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. %% See the License for the specific language governing permissions and %% limitations under the License. %% %% %CopyrightEnd% %% %%% @doc SSH/SFTP client module. %%% %%%

ct_ssh uses the OTP ssh application and more detailed information %%% about e.g. functions, types and options can be found in the %%% documentation for this application.

%%% %%%

The Server argument in the SFTP functions should %%% only be used for SFTP sessions that have been started on existing %%% SSH connections (i.e. when the original connection type is %%% ssh). Whenever the connection type is %%% sftp, use the SSH connection reference only.

%%% %%%

The following options are valid for specifying an SSH/SFTP %%% connection (i.e. may be used as config elements):

%%% %%% 
%%%
%%%  [{ConnType, Addr},
%%%   {port, Port},
%%%   {user, UserName}
%%%   {password, Pwd}
%%%   {user_dir, String}
%%%   {public_key_alg, PubKeyAlg}
%%%   {connect_timeout, Timeout}
%%%   {key_cb, KeyCallbackMod}]
%%%
%%% %%%

ConnType = ssh | sftp.

%%%

Please see ssh(3) for other types.

%%% %%%

All timeout parameters in ct_ssh functions are values in %%% milliseconds.

%%% %%% @type connection() = handle() | ct:target_name() %%% @type handle() = ct_gen_conn:handle(). Handle for a specific %%% SSH/SFTP connection. %%% @type ssh_sftp_return() = term(). A return value from an ssh_sftp function. -module(ct_ssh). %% SSH Functions -export([connect/1, connect/2, connect/3, disconnect/1, session_open/1, session_open/2, session_close/2, send/3, send/4, send/5, receive_response/2, receive_response/3, receive_response/4, send_and_receive/3, send_and_receive/4, send_and_receive/5, send_and_receive/6, exec/2, exec/3, exec/4, subsystem/3, subsystem/4, shell/2, shell/3]). %% STFP Functions -export([sftp_connect/1, read_file/2, write_file/3, list_dir/2, open/3, opendir/2, close/2, read/3, pread/4, aread/3, apread/4, write/3, pwrite/4, awrite/3, apwrite/4, position/3, read_file_info/2, get_file_info/2, read_link_info/2, write_file_info/3, read_link/2, make_symlink/3, rename/3, delete/2, make_dir/2, del_dir/2, read_file/3, write_file/4, list_dir/3, open/4, opendir/3, close/3, read/4, pread/5, aread/4, apread/5, write/4, pwrite/5, awrite/4, apwrite/5, position/4, read_file_info/3, get_file_info/3, read_link_info/3, write_file_info/4, read_link/3, make_symlink/4, rename/4, delete/3, make_dir/3, del_dir/3]). %% Callbacks -export([init/3, handle_msg/2, reconnect/2, terminate/2, close/1]). -define(DEFAULT_TIMEOUT, 10000). -record(state, {ssh_ref, conn_type, target}). -type handle() :: pid(). %%%----------------------------------------------------------------- %%%------------------------ SSH COMMANDS --------------------------- %%%----------------------------------------------------------------- %%% @spec connect(KeyOrName) -> {ok,Handle} | {error,Reason} %%% @equiv connect(KeyOrName,host,[]) connect(KeyOrName) -> connect(KeyOrName, host). %%%----------------------------------------------------------------- %%% @spec connect(KeyOrName,ConnType) -> {ok,Handle} | {error,Reason} %%% @equiv connect(KeyOrName,ConnType,[]) connect(KeyOrName, ConnType) when is_atom(ConnType) -> connect(KeyOrName, ConnType, []); %%%----------------------------------------------------------------- %%% @spec connect(KeyOrName,ExtraOpts) -> {ok,Handle} | {error,Reason} %%% @equiv connect(KeyOrName,host,ExtraOpts) connect(KeyOrName, ExtraOpts) when is_list(ExtraOpts) -> connect(KeyOrName, host, ExtraOpts). %%%----------------------------------------------------------------- %%% @spec connect(KeyOrName,ConnType,ExtraOpts) -> %%% {ok,Handle} | {error,Reason} %%% KeyOrName = Key | Name %%% Key = atom() %%% Name = ct:target_name() %%% ConnType = ssh | sftp | host %%% ExtraOpts = ssh_connect_options() %%% Handle = handle() %%% Reason = term() %%% %%% @doc Open an SSH or SFTP connection using the information %%% associated with KeyOrName. %%% %%%

If Name (an alias name for Key), %%% is used to identify the connection, this name may %%% be used as connection reference for subsequent calls. %%% It's only possible to have one open connection at a time %%% associated with Name. If Key is %%% used, the returned handle must be used for subsequent calls %%% (multiple connections may be opened using the config %%% data specified by Key). See ct:require/2 %%% for how to create a new Name

%%% %%%

ConnType will always override the type %%% specified in the address tuple in the configuration data (and %%% in ExtraOpts). So it is possible to for example %%% open an sftp connection directly using data originally %%% specifying an ssh connection. The value host %%% means the connection type specified by the host option %%% (either in the configuration data or in ExtraOpts) %%% will be used.

%%% %%%

ExtraOpts (optional) are extra SSH options %%% to be added to the config data for KeyOrName. %%% The extra options will override any existing options with the %%% same key in the config data. For details on valid SSH %%% options, see the documentation for the OTP ssh application.

%%% %%% @see ct:require/2 connect(KeyOrName, ConnType, ExtraOpts) -> case ct:get_config(KeyOrName) of undefined -> log(heading(connect,KeyOrName), "Failed: ~tp\n", [{not_available,KeyOrName}]), {error,{not_available,KeyOrName}}; SSHData -> AllOpts = ExtraOpts++SSHData, {ConnType1,Addr,AllOpts1} = case ConnType of host -> case proplists:get_value(ssh, AllOpts) of undefined -> case proplists:get_value(sftp, AllOpts) of undefined -> log(heading(connect,KeyOrName), "No host information specified!\n",[]); SFTPAddr -> {sftp,SFTPAddr,AllOpts} end; SSHAddr -> {ssh,SSHAddr,AllOpts} end; _ -> case proplists:get_value(ConnType, AllOpts) of undefined when ConnType == ssh -> case proplists:get_value(sftp, AllOpts) of undefined -> {ssh,undefined,AllOpts}; SFTPAddr -> try_log(heading(connect,KeyOrName), "Note: Opening ssh connection " "to sftp host.\n", []), {ssh,SFTPAddr, [{ssh,SFTPAddr} | proplists:delete(sftp, AllOpts)]} end; undefined when ConnType == sftp -> case proplists:get_value(ssh, AllOpts) of undefined -> {sftp,undefined,AllOpts}; SSHAddr -> try_log(heading(connect,KeyOrName), "Note: Opening sftp connection " "to ssh host.\n", []), {sftp,SSHAddr, [{sftp,SSHAddr}|proplists:delete(ssh, AllOpts)]} end; SSHorSFTPAddr -> {ConnType,SSHorSFTPAddr,AllOpts} end end, case {Addr,proplists:get_value(port, AllOpts1)} of {undefined,_} -> log(heading(connect,KeyOrName), "Failed: ~tp\n", [{not_available,{KeyOrName,ConnType1}}]), {error,{not_available,{KeyOrName,ConnType1}}}; {_,undefined} -> try_log(heading(connect,KeyOrName), "Opening ~w connection to ~tp:22\n", [ConnType1,Addr]), ct_gen_conn:start(KeyOrName, {ConnType1,Addr,22}, AllOpts1, ?MODULE); {_,Port} -> try_log(heading(connect,KeyOrName), "Opening ~w connection to ~tp:~w\n", [ConnType1,Addr,Port]), ct_gen_conn:start(KeyOrName, {ConnType1,Addr,Port}, AllOpts1, ?MODULE) end end. %%%----------------------------------------------------------------- %%% @spec disconnect(SSH) -> ok | {error,Reason} %%% SSH = connection() %%% Reason = term() %%% %%% @doc Close an SSH/SFTP connection. disconnect(SSH) -> case get_handle(SSH) of {ok,Pid} -> try_log(heading(disconnect,SSH), "Handle: ~p", [Pid], 5000), case ct_gen_conn:stop(Pid) of {error,{process_down,Pid,noproc}} -> {error,already_closed}; Result -> Result end; Error -> Error end. %%%----------------------------------------------------------------- %%% @spec session_open(SSH) -> {ok,ChannelId} | {error, Reason} %%% @equiv session_open(SSH,DefaultTimeout) session_open(SSH) -> call(SSH, {session_open,?DEFAULT_TIMEOUT}). %%%----------------------------------------------------------------- %%% @spec session_open(SSH,Timeout) -> {ok,ChannelId} | {error, Reason} %%% SSH = connection() %%% Timeout = integer() %%% ChannelId = integer() %%% Reason = term() %%% %%% @doc Opens a channel for an SSH session. session_open(SSH, Timeout) -> call(SSH, {session_open,Timeout}). %%%----------------------------------------------------------------- %%% @spec session_close(SSH,ChannelId) -> ok | {error, Reason} %%% SSH = connection() %%% ChannelId = integer() %%% Reason = term() %%% %%% @doc Closes an SSH session channel. session_close(SSH, ChannelId) -> call(SSH, {session_close,ChannelId}). %%%----------------------------------------------------------------- %%% @spec exec(SSH,Command) -> {ok,Data} | {error,Reason} %%% @equiv exec(SSH,Command,DefaultTimeout) exec(SSH, Command) -> exec(SSH, undefined, Command, ?DEFAULT_TIMEOUT). %%%----------------------------------------------------------------- %%% @spec exec(SSH,Command,Timeout) -> {ok,Data} | {error,Reason} %%% SSH = connection() %%% Command = string() %%% Timeout = integer() %%% Data = list() %%% Reason = term() %%% %%% @doc Requests server to perform Command. A session %%% channel is opened automatically for the request. %%% Data is received from the server as a result %%% of the command. exec(SSH, Command, Timeout) when is_list(Command) -> exec(SSH, undefined, Command, Timeout); %%%----------------------------------------------------------------- %%% @spec exec(SSH,ChannelId,Command) -> {ok,Data} | {error,Reason} %%% @equiv exec(SSH,ChannelId,Command,DefaultTimeout) exec(SSH, ChannelId, Command) when is_integer(ChannelId) -> exec(SSH, ChannelId, Command, ?DEFAULT_TIMEOUT). %%%----------------------------------------------------------------- %%% @spec exec(SSH,ChannelId,Command,Timeout) -> {ok,Data} | {error,Reason} %%% SSH = connection() %%% ChannelId = integer() %%% Command = string() %%% Timeout = integer() %%% Data = list() %%% Reason = term() %%% %%% @doc Requests server to perform Command. A previously %%% opened session channel is used for the request. %%% Data is received from the server as a result %%% of the command. exec(SSH, ChannelId, Command, Timeout) -> call(SSH, {exec,ChannelId,Command,Timeout}). %%%----------------------------------------------------------------- %%% @spec receive_response(SSH,ChannelId) -> {ok,Data} | {error,Reason} %%% @equiv receive_response(SSH,ChannelId,close) receive_response(SSH, ChannelId) -> receive_response(SSH, ChannelId, close, ?DEFAULT_TIMEOUT). %%%----------------------------------------------------------------- %%% @spec receive_response(SSH,ChannelId,End) -> {ok,Data} | {error,Reason} %%% @equiv receive_response(SSH,ChannelId,End,DefaultTimeout) receive_response(SSH, ChannelId, End) when is_function(End) -> receive_response(SSH, ChannelId, End, ?DEFAULT_TIMEOUT); %%%----------------------------------------------------------------- %%% @spec receive_response(SSH,ChannelId,Timeout) -> {ok,Data} | {error,Reason} %%% @equiv receive_response(SSH,ChannelId,close,Timeout) receive_response(SSH, ChannelId, Timeout) when is_integer(Timeout) -> receive_response(SSH, ChannelId, close, Timeout). %%%----------------------------------------------------------------- %%% @spec receive_response(SSH,ChannelId,End,Timeout) -> %%% {ok,Data} | {timeout,Data} | {error,Reason} %%% SSH = connection() %%% ChannelId = integer() %%% End = Fun | close | timeout %%% Timeout = integer() %%% Data = list() %%% Reason = term() %%% %%% @doc Receives expected data from server on the specified %%% session channel. %%% %%%

If End == close, data is returned %%% to the caller when the channel is closed by the %%% server. If a timeout occurs before this happens, %%% the function returns {timeout,Data} %%% (where Data is the data received so far). %%% If End == timeout, a timeout is expected %%% and {ok,Data} is returned both in the case %%% of a timeout and when the channel is closed. If %%% End is a fun, this fun will be %%% called with one argument - the data value in a received %%% ssh_cm message (see ssh_connection(3)). The %%% fun should return true to end the receiving %%% operation (and have the so far collected data returned), or %%% false to wait for more data from the server. %%% (Note that even if a fun is supplied, the function returns %%% immediately if the server closes the channel).

receive_response(SSH, ChannelId, End, Timeout) -> call(SSH, {receive_response,ChannelId,End,Timeout}). %%%----------------------------------------------------------------- %%% @spec send(SSH,ChannelId,Data) -> ok | {error,Reason} %%% @equiv send(SSH,ChannelId,0,Data,DefaultTimeout) send(SSH, ChannelId, Data) -> send(SSH, ChannelId, 0, Data, ?DEFAULT_TIMEOUT). %%%----------------------------------------------------------------- %%% @spec send(SSH,ChannelId,Data,Timeout) -> ok | {error,Reason} %%% @equiv send(SSH,ChannelId,0,Data,Timeout) send(SSH, ChannelId, Data, Timeout) when is_integer(Timeout) -> send(SSH, ChannelId, 0, Data, Timeout); %%%----------------------------------------------------------------- %%% @spec send(SSH,ChannelId,Type,Data) -> ok | {error,Reason} %%% @equiv send(SSH,ChannelId,Type,Data,DefaultTimeout) send(SSH, ChannelId, Type, Data) when is_integer(Type) -> send(SSH, ChannelId, Type, Data, ?DEFAULT_TIMEOUT). %%%----------------------------------------------------------------- %%% @spec send(SSH,ChannelId,Type,Data,Timeout) -> ok | {error,Reason} %%% SSH = connection() %%% ChannelId = integer() %%% Type = integer() %%% Data = list() %%% Timeout = integer() %%% Reason = term() %%% %%% @doc Send data to server on specified session channel. send(SSH, ChannelId, Type, Data, Timeout) -> call(SSH, {send,ChannelId,Type,Data,Timeout}). %%%----------------------------------------------------------------- %%% @spec send_and_receive(SSH,ChannelId,Data) -> %%% {ok,Data} | {error,Reason} %%% @equiv send_and_receive(SSH,ChannelId,Data,close) send_and_receive(SSH, ChannelId, Data) -> send_and_receive(SSH, ChannelId, 0, Data, close, ?DEFAULT_TIMEOUT). %%%----------------------------------------------------------------- %%% @spec send_and_receive(SSH,ChannelId,Data,End) -> %%% {ok,Data} | {error,Reason} %%% @equiv send_and_receive(SSH,ChannelId,0,Data,End,DefaultTimeout) send_and_receive(SSH, ChannelId, Data, End) when is_function(End) -> send_and_receive(SSH, ChannelId, 0, Data, End, ?DEFAULT_TIMEOUT); %%%----------------------------------------------------------------- %%% @spec send_and_receive(SSH,ChannelId,Data,Timeout) -> %%% {ok,Data} | {error,Reason} %%% @equiv send_and_receive(SSH,ChannelId,0,Data,close,Timeout) send_and_receive(SSH, ChannelId, Data, Timeout) when is_integer(Timeout) -> send_and_receive(SSH, ChannelId, 0, Data, close, Timeout); %%%----------------------------------------------------------------- %%% @spec send_and_receive(SSH,ChannelId,Type,Data) -> %%% {ok,Data} | {error,Reason} %%% @equiv send_and_receive(SSH,ChannelId,Type,Data,close,DefaultTimeout) send_and_receive(SSH, ChannelId, Type, Data) when is_integer(Type) -> send_and_receive(SSH, ChannelId, Type, Data, close, ?DEFAULT_TIMEOUT). %%%----------------------------------------------------------------- %%% @spec send_and_receive(SSH,ChannelId,Data,End,Timeout) -> %%% {ok,Data} | {error,Reason} %%% @equiv send_and_receive(SSH,ChannelId,0,Data,End,Timeout) send_and_receive(SSH, ChannelId, Data, End, Timeout) when is_integer(Timeout) -> send_and_receive(SSH, ChannelId, 0, Data, End, Timeout); %%%----------------------------------------------------------------- %%% @spec send_and_receive(SSH,ChannelId,Type,Data,Timeout) -> %%% {ok,Data} | {error,Reason} %%% @equiv send_and_receive(SSH,ChannelId,Type,Data,close,Timeout) send_and_receive(SSH, ChannelId, Type, Data, Timeout) when is_integer(Type) -> send_and_receive(SSH, ChannelId, Type, Data, close, Timeout); %%%----------------------------------------------------------------- %%% @spec send_and_receive(SSH,ChannelId,Type,Data,End) -> %%% {ok,Data} | {error,Reason} %%% @equiv send_and_receive(SSH,ChannelId,Type,Data,End,DefaultTimeout) send_and_receive(SSH, ChannelId, Type, Data, End) when is_function(End) -> send_and_receive(SSH, ChannelId, Type, Data, End, ?DEFAULT_TIMEOUT). %%%----------------------------------------------------------------- %%% @spec send_and_receive(SSH,ChannelId,Type,Data,End,Timeout) -> %%% {ok,Data} | {error,Reason} %%% SSH = connection() %%% ChannelId = integer() %%% Type = integer() %%% Data = list() %%% End = Fun | close | timeout %%% Timeout = integer() %%% Reason = term() %%% %%% @doc Send data to server on specified session channel and wait %%% to receive the server response. %%% %%%

See receive_response/4 for details on the %%% End argument.

send_and_receive(SSH, ChannelId, Type, Data, End, Timeout) -> call(SSH, {send_and_receive,ChannelId,Type,Data,End,Timeout}). %%%----------------------------------------------------------------- %%% @spec subsystem(SSH,ChannelId,Subsystem) -> Status | {error,Reason} %%% @equiv subsystem(SSH,ChannelId,Subsystem,DefaultTimeout) subsystem(SSH, ChannelId, Subsystem) -> subsystem(SSH, ChannelId, Subsystem, ?DEFAULT_TIMEOUT). %%%----------------------------------------------------------------- %%% @spec subsystem(SSH,ChannelId,Subsystem,Timeout) -> %%% Status | {error,Reason} %%% SSH = connection() %%% ChannelId = integer() %%% Subsystem = string() %%% Timeout = integer() %%% Status = success | failure %%% Reason = term() %%% %%% @doc Sends a request to execute a predefined subsystem. subsystem(SSH, ChannelId, Subsystem, Timeout) -> call(SSH, {subsystem,ChannelId,Subsystem,Timeout}). -spec shell(SSH, ChannelId) -> Result when SSH :: handle() | ct:target_name(), ChannelId :: ssh:ssh_channel_id(), Result :: ok | {error,term()}. shell(SSH, ChannelId) -> shell(SSH, ChannelId, ?DEFAULT_TIMEOUT). -spec shell(SSH, ChannelId, Timeout) -> Result when SSH :: handle() | ct:target_name(), ChannelId :: ssh:ssh_channel_id(), Timeout :: timeout(), Result :: ok | {error,term()}. shell(SSH, ChannelId, Timeout) -> call(SSH, {shell,ChannelId,Timeout}). %%%----------------------------------------------------------------- %%%------------------------ SFTP COMMANDS -------------------------- %%%----------------------------------------------------------------- %%% @spec sftp_connect(SSH) -> {ok,Server} | {error,Reason} %%% SSH = connection() %%% Server = pid() %%% Reason = term() %%% @doc Starts an SFTP session on an already existing SSH connection. %%% Server identifies the new session and must be %%% specified whenever SFTP requests are to be sent. sftp_connect(SSH) -> call(SSH, sftp_connect). %%%----------------------------------------------------------------- %%% @spec read_file(SSH, File) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read_file(SSH, File) -> call(SSH, {read_file,sftp,File}). %%%----------------------------------------------------------------- %%% @spec read_file(SSH, Server, File) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read_file(SSH, Server, File) -> call(SSH, {read_file,Server,File}). %%%----------------------------------------------------------------- %%% @spec write_file(SSH, File, Iolist) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). write_file(SSH, File, Iolist) -> call(SSH, {write_file,sftp,File,Iolist}). %%%----------------------------------------------------------------- %%% @spec write_file(SSH, Server, File, Iolist) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). write_file(SSH, Server, File, Iolist) -> call(SSH, {write_file,Server,File,Iolist}). %%%----------------------------------------------------------------- %%% @spec list_dir(SSH, Path) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). list_dir(SSH, Path) -> call(SSH, {list_dir,sftp,Path}). %%%----------------------------------------------------------------- %%% @spec list_dir(SSH, Server, Path) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). list_dir(SSH, Server, Path) -> call(SSH, {list_dir,Server,Path}). %%%----------------------------------------------------------------- %%% @spec open(SSH, File, Mode) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). open(SSH, File, Mode) -> call(SSH, {open,sftp,File,Mode}). %%%----------------------------------------------------------------- %%% @spec open(SSH, Server, File, Mode) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). open(SSH, Server, File, Mode) -> call(SSH, {open,Server,File,Mode}). %%%----------------------------------------------------------------- %%% @spec opendir(SSH, Path) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). opendir(SSH, Path) -> call(SSH, {opendir,sftp,Path}). %%%----------------------------------------------------------------- %%% @spec opendir(SSH, Server, Path) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). opendir(SSH, Server, Path) -> call(SSH, {opendir,Server,Path}). %%%----------------------------------------------------------------- %%% @spec close(SSH, Handle) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). close(SSH, Handle) -> call(SSH, {close,sftp,Handle}). %%%----------------------------------------------------------------- %%% @spec close(SSH, Server, Handle) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). close(SSH, Server, Handle) -> call(SSH, {close,Server,Handle}). %%%----------------------------------------------------------------- %%% @spec read(SSH, Handle, Len) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read(SSH, Handle, Len) -> call(SSH, {read,sftp,Handle,Len}). %%%----------------------------------------------------------------- %%% @spec read(SSH, Server, Handle, Len) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read(SSH, Server, Handle, Len) -> call(SSH, {read,Server,Handle,Len}). %%%----------------------------------------------------------------- %%% @spec pread(SSH, Handle, Position, Length) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). pread(SSH, Handle, Position, Length) -> call(SSH, {pread,sftp,Handle,Position,Length}). %%%----------------------------------------------------------------- %%% @spec pread(SSH, Server, Handle, Position, Length) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). pread(SSH, Server, Handle, Position, Length) -> call(SSH, {pread,Server,Handle,Position,Length}). %%%----------------------------------------------------------------- %%% @spec aread(SSH, Handle, Len) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). aread(SSH, Handle, Len) -> call(SSH, {aread,sftp,Handle,Len}). %%%----------------------------------------------------------------- %%% @spec aread(SSH, Server, Handle, Len) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). aread(SSH, Server, Handle, Len) -> call(SSH, {aread,Server,Handle,Len}). %%%----------------------------------------------------------------- %%% @spec apread(SSH, Handle, Position, Length) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). apread(SSH, Handle, Position, Length) -> call(SSH, {apread,sftp,Handle,Position,Length}). %%%----------------------------------------------------------------- %%% @spec apread(SSH, Server, Handle, Position, Length) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). apread(SSH, Server, Handle, Position, Length) -> call(SSH, {apread,Server,Handle,Position,Length}). %%%----------------------------------------------------------------- %%% @spec write(SSH, Handle, Data) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). write(SSH, Handle, Data) -> call(SSH, {write,sftp,Handle,Data}). %%%----------------------------------------------------------------- %%% @spec write(SSH, Server, Handle, Data) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). write(SSH, Server, Handle, Data) -> call(SSH, {write,Server,Handle,Data}). %%%----------------------------------------------------------------- %%% @spec pwrite(SSH, Handle, Position, Data) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). pwrite(SSH, Handle, Position, Data) -> call(SSH, {pwrite,sftp,Handle,Position,Data}). %%%----------------------------------------------------------------- %%% @spec pwrite(SSH, Server, Handle, Position, Data) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). pwrite(SSH, Server, Handle, Position, Data) -> call(SSH, {pwrite,Server,Handle,Position,Data}). %%%----------------------------------------------------------------- %%% @spec awrite(SSH, Handle, Data) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). awrite(SSH, Handle, Data) -> call(SSH, {awrite,sftp,Handle, Data}). %%%----------------------------------------------------------------- %%% @spec awrite(SSH, Server, Handle, Data) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). awrite(SSH, Server, Handle, Data) -> call(SSH, {awrite,Server,Handle, Data}). %%%----------------------------------------------------------------- %%% @spec apwrite(SSH, Handle, Position, Data) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). apwrite(SSH, Handle, Position, Data) -> call(SSH, {apwrite,sftp,Handle,Position,Data}). %%%----------------------------------------------------------------- %%% @spec apwrite(SSH, Server, Handle, Position, Data) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). apwrite(SSH, Server, Handle, Position, Data) -> call(SSH, {apwrite,Server,Handle,Position,Data}). %%%----------------------------------------------------------------- %%% @spec position(SSH, Handle, Location) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). position(SSH, Handle, Location) -> call(SSH, {position,sftp,Handle,Location}). %%%----------------------------------------------------------------- %%% @spec position(SSH, Server, Handle, Location) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). position(SSH, Server, Handle, Location) -> call(SSH, {position,Server,Handle,Location}). %%%----------------------------------------------------------------- %%% @spec read_file_info(SSH, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read_file_info(SSH, Name) -> call(SSH, {read_file_info,sftp,Name}). %%%----------------------------------------------------------------- %%% @spec read_file_info(SSH, Server, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read_file_info(SSH, Server, Name) -> call(SSH, {read_file_info,Server,Name}). %%%----------------------------------------------------------------- %%% @spec get_file_info(SSH, Handle) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). get_file_info(SSH, Handle) -> call(SSH, {get_file_info,sftp,Handle}). %%%----------------------------------------------------------------- %%% @spec get_file_info(SSH, Server, Handle) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). get_file_info(SSH, Server, Handle) -> call(SSH, {get_file_info,Server,Handle}). %%%----------------------------------------------------------------- %%% @spec read_link_info(SSH, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read_link_info(SSH, Name) -> call(SSH, {read_link_info,sftp,Name}). %%%----------------------------------------------------------------- %%% @spec read_link_info(SSH, Server, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read_link_info(SSH, Server, Name) -> call(SSH, {read_link_info,Server,Name}). %%%----------------------------------------------------------------- %%% @spec write_file_info(SSH, Name, Info) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). write_file_info(SSH, Name, Info) -> call(SSH, {write_file_info,sftp,Name,Info}). %%%----------------------------------------------------------------- %%% @spec write_file_info(SSH, Server, Name, Info) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). write_file_info(SSH, Server, Name, Info) -> call(SSH, {write_file_info,Server,Name,Info}). %%%----------------------------------------------------------------- %%% @spec read_link(SSH, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read_link(SSH, Name) -> call(SSH, {read_link,sftp,Name}). %%%----------------------------------------------------------------- %%% @spec read_link(SSH, Server, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). read_link(SSH, Server, Name) -> call(SSH, {read_link,Server,Name}). %%%----------------------------------------------------------------- %%% @spec make_symlink(SSH, Name, Target) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). make_symlink(SSH, Name, Target) -> call(SSH, {make_symlink,sftp,Name,Target}). %%%----------------------------------------------------------------- %%% @spec make_symlink(SSH, Server, Name, Target) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). make_symlink(SSH, Server, Name, Target) -> call(SSH, {make_symlink,Server,Name,Target}). %%%----------------------------------------------------------------- %%% @spec rename(SSH, OldName, NewName) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). rename(SSH, OldName, NewName) -> call(SSH, {rename,sftp,OldName,NewName}). %%%----------------------------------------------------------------- %%% @spec rename(SSH, Server, OldName, NewName) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). rename(SSH, Server, OldName, NewName) -> call(SSH, {rename,Server,OldName,NewName}). %%%----------------------------------------------------------------- %%% @spec delete(SSH, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). delete(SSH, Name) -> call(SSH, {delete,sftp,Name}). %%%----------------------------------------------------------------- %%% @spec delete(SSH, Server, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). delete(SSH, Server, Name) -> call(SSH, {delete,Server,Name}). %%%----------------------------------------------------------------- %%% @spec make_dir(SSH, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). make_dir(SSH, Name) -> call(SSH, {make_dir,sftp,Name}). %%%----------------------------------------------------------------- %%% @spec make_dir(SSH, Server, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). make_dir(SSH, Server, Name) -> call(SSH, {make_dir,Server,Name}). %%%----------------------------------------------------------------- %%% @spec del_dir(SSH, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). del_dir(SSH, Name) -> call(SSH, {del_dir,sftp,Name}). %%%----------------------------------------------------------------- %%% @spec del_dir(SSH, Server, Name) -> Result %%% SSH = connection() %%% Result = ssh_sftp_return() | {error,Reason} %%% Reason = term() %%% @doc For info and other types, see ssh_sftp(3). del_dir(SSH, Server, Name) -> call(SSH, {del_dir,Server,Name}). %%%================================================================= %%% Callback functions %%%================================================================= %% @hidden init(KeyOrName, {ConnType,Addr,Port}, AllOpts) -> User = proplists:get_value(user, AllOpts), Password = case proplists:get_value(password, AllOpts) of undefined -> ""; Pwd -> Pwd end, AllOpts1 = case proplists:get_value(connect_timeout, AllOpts) of undefined -> [{connect_timeout,?DEFAULT_TIMEOUT}|AllOpts]; _ -> AllOpts end, Options = lists:foldl(fun({ssh,_},Opts) -> Opts; ({sftp,_},Opts) -> Opts; ({port,_},Opts) -> Opts; ({silently_accept_hosts,_},Opts) -> Opts; ({user_interaction,_},Opts) -> Opts; (Opt={Key,_},Opts) -> case lists:keymember(Key, 1, Opts) of true -> Opts; false -> [Opt|Opts] end; (_,Opts) -> Opts end, [], AllOpts1), FinalOptions = [{silently_accept_hosts,true}, {user_interaction,false} | Options], _ = crypto:start(), _ = ssh:start(), Result = case ConnType of ssh -> ssh:connect(Addr, Port, FinalOptions); sftp -> ssh_sftp:start_channel(Addr, Port, FinalOptions) end, case Result of Error = {error,_} -> Error; Ok -> SSHRef = element(2, Ok), try_log(heading(init,KeyOrName), "Opened ~w connection:\n" "Host: ~tp (~p)\nUser: ~tp\nPassword: ~p\n", [ConnType,Addr,Port,User, lists:duplicate(string:length(Password),$*)]), {ok,SSHRef,#state{ssh_ref=SSHRef, conn_type=ConnType, target=KeyOrName}} end. %% @hidden handle_msg(sftp_connect, State) -> #state{ssh_ref=SSHRef, target=Target} = State, try_log(heading(sftp_connect,Target), "SSH Ref: ~p", [SSHRef]), {ssh_sftp:start_channel(SSHRef),State}; handle_msg({session_open,TO}, State) -> #state{ssh_ref=SSHRef, target=Target} = State, try_log(heading(session_open,Target), "SSH Ref: ~p, Timeout: ~p", [SSHRef,TO]), {ssh_connection:session_channel(SSHRef, TO),State}; handle_msg({session_close,Chn}, State) -> #state{ssh_ref=SSHRef, target=Target} = State, try_log(heading(session_close,Target), "SSH Ref: ~p, Chn: ~p", [SSHRef,Chn]), {ssh_connection:close(SSHRef, Chn),State}; handle_msg({exec,Chn,Command,TO}, State) -> #state{ssh_ref=SSHRef, target=Target} = State, Chn1 = if Chn == undefined -> try_log(heading(exec,Target), "Opening channel for exec, SSH Ref: ~p", [SSHRef]), case ssh_connection:session_channel(SSHRef, TO) of {ok,C} -> C; CErr -> CErr end; true -> Chn end, case Chn1 of {error,_} = ChnError -> log(heading(exec,Target), "Opening channel failed: ~tp", [ChnError]), {ChnError,State}; _ -> try_log(heading(exec,Target), "SSH Ref: ~p, Chn: ~p, Command: ~tp, Timeout: ~p", [SSHRef,Chn1,Command,TO]), case ssh_connection:exec(SSHRef, Chn1, Command, TO) of success -> Result = do_recv_response(SSHRef, Chn1, [], close, TO), ssh_connection:close(SSHRef, Chn1), {Result,State}; Other -> {{error,Other},State} end end; handle_msg({receive_response,Chn,End,TO}, State) -> #state{ssh_ref=SSHRef, target=Target} = State, try_log(heading(receive_response,Target), "SSH Ref: ~p, Chn: ~p, Timeout: ~p", [SSHRef,Chn,TO]), Result = do_recv_response(SSHRef, Chn, [], End, TO), {Result,State}; handle_msg({send,Chn,Type,Data,TO}, State) -> #state{ssh_ref=SSHRef, target=Target} = State, try_log(heading(send,Target), "SSH Ref: ~p, Chn: ~p, Type: ~p, Timeout: ~p~n" "Data: ~tp", [SSHRef,Chn,Type,TO,Data]), Result = ssh_connection:send(SSHRef, Chn, Type, Data, TO), {Result,State}; handle_msg({send_and_receive,Chn,Type,Data,End,TO}, State) -> #state{ssh_ref=SSHRef, target=Target} = State, try_log(heading(send_and_receive,Target), "SSH Ref: ~p, Chn: ~p, Type: ~p, Timeout: ~p~n" "Data: ~tp", [SSHRef,Chn,Type,TO,Data]), case ssh_connection:send(SSHRef, Chn, Type, Data, TO) of ok -> Result = do_recv_response(SSHRef, Chn, [], End, TO), {Result,State}; Error -> {Error,State} end; handle_msg({subsystem,Chn,Subsystem,TO}, State) -> #state{ssh_ref=SSHRef, target=Target} = State, try_log(heading(subsystem,Target), "SSH Ref: ~p, Chn: ~p, Subsys: ~tp, Timeout: ~p", [SSHRef,Chn,Subsystem,TO]), Result = ssh_connection:subsystem(SSHRef, Chn, Subsystem, TO), {Result,State}; handle_msg({shell,Chn,TO}, State) -> #state{ssh_ref=SSHRef, target=Target} = State, try_log(heading(shell,Target), "SSH Ref: ~p, Chn: ~p, Timeout: ~p", [SSHRef,Chn,TO]), Result = ssh_connection:shell(SSHRef, Chn), {Result,State}; %% --- SFTP Commands --- handle_msg({read_file,Srv,File}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:read_file(ref(Srv,SSHRef), File),S}; handle_msg({write_file,Srv,File,Iolist}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:write_file(ref(Srv,SSHRef), File, Iolist),S}; handle_msg({list_dir,Srv,Path}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:list_dir(ref(Srv,SSHRef), Path),S}; handle_msg({open,Srv,File,Mode}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:open(ref(Srv,SSHRef), File, Mode),S}; handle_msg({opendir,Srv,Path}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:opendir(ref(Srv,SSHRef), Path),S}; handle_msg({close,Srv,Handle}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:close(ref(Srv,SSHRef), Handle),S}; handle_msg({read,Srv,Handle,Len}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:read(ref(Srv,SSHRef), Handle, Len),S}; handle_msg({pread,Srv,Handle,Position,Length}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:pread(ref(Srv,SSHRef),Handle,Position,Length),S}; handle_msg({aread,Srv,Handle,Len}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:aread(ref(Srv,SSHRef), Handle, Len),S}; handle_msg({apread,Srv,Handle,Position,Length}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:apread(ref(Srv,SSHRef), Handle, Position, Length),S}; handle_msg({write,Srv,Handle,Data}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:write(ref(Srv,SSHRef), Handle, Data),S}; handle_msg({pwrite,Srv,Handle,Position,Data}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:pwrite(ref(Srv,SSHRef), Handle, Position, Data),S}; handle_msg({awrite,Srv,Handle,Data}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:awrite(ref(Srv,SSHRef), Handle, Data),S}; handle_msg({apwrite,Srv,Handle,Position,Data}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:apwrite(ref(Srv,SSHRef), Handle, Position, Data),S}; handle_msg({position,Srv,Handle,Location}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:position(ref(Srv,SSHRef), Handle, Location),S}; handle_msg({read_file_info,Srv,Name}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:read_file_info(ref(Srv,SSHRef), Name),S}; handle_msg({get_file_info,Srv,Handle}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:get_file_info(ref(Srv,SSHRef), Handle),S}; handle_msg({read_link_info,Srv,Name}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:read_link_info(ref(Srv,SSHRef), Name),S}; handle_msg({write_file_info,Srv,Name,Info}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:write_file_info(ref(Srv,SSHRef), Name, Info),S}; handle_msg({read_link,Srv,Name}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:read_link(ref(Srv,SSHRef), Name),S}; handle_msg({make_symlink,Srv,Name,Target}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:make_symlink(ref(Srv,SSHRef), Name, Target),S}; handle_msg({rename,Srv,OldName,NewName}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:rename(ref(Srv,SSHRef), OldName, NewName),S}; handle_msg({delete,Srv,Name}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:delete(ref(Srv,SSHRef), Name),S}; handle_msg({make_dir,Srv,Name}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:make_dir(ref(Srv,SSHRef), Name),S}; handle_msg({del_dir,Srv,Name}=Cmd, S=#state{ssh_ref=SSHRef}) -> try_log(heading(sftp,S#state.target), "SSH Ref: ~p, Server: ~p~nCmd: ~tp", [SSHRef,ref(Srv,SSHRef),mod(Cmd)]), {ssh_sftp:del_dir(ref(Srv,SSHRef), Name),S}. %% @hidden reconnect(_Addr,_State) -> {error,no_reconnection_of_ssh}. %% @hidden close(SSHRef) -> disconnect(SSHRef). %% @hidden terminate(SSHRef, State) -> case State#state.conn_type of ssh -> try_log(heading(disconnect_ssh,State#state.target), "SSH Ref: ~p",[SSHRef], 5000), ssh:close(SSHRef); sftp -> try_log(heading(disconnect_sftp,State#state.target), "SFTP Ref: ~p",[SSHRef], 5000), ssh_sftp:stop_channel(SSHRef) end. %%%================================================================= %%% Internal functions %%%----------------------------------------------------------------- %%% do_recv_response(SSH, Chn, Data, End, Timeout) -> receive {ssh_cm, SSH, {open,Chn,RemoteChn,{session}}} -> debug("RECVD open"), {ok,{open,Chn,RemoteChn,{session}}}; {ssh_cm, SSH, {closed,Chn}} -> ssh_connection:close(SSH, Chn), debug("CLSD~n~p ~p", [SSH,Chn]), {ok,Data}; {ssh_cm, SSH, {data,Chn,_,NewData}} -> ssh_connection:adjust_window(SSH, Chn, size(NewData)), debug("RECVD~n~tp", [binary_to_list(NewData)]), DataAcc = Data ++ binary_to_list(NewData), if is_function(End) -> case End(DataAcc) of true -> {ok,DataAcc}; false -> do_recv_response(SSH, Chn, DataAcc, End, Timeout) end; true -> do_recv_response(SSH, Chn, DataAcc, End, Timeout) end; {ssh_cm, SSH, {eof,Chn}} -> debug("RECVD EOF~n~p ~p", [SSH,Chn]), {ok,Data}; {ssh_cm, SSH, {exit_signal,Chn,Signal,Err,_Lang}} -> debug("RECVD exit_signal~n~p ~p~n~p ~p", [SSH,Chn,Signal,Err]), do_recv_response(SSH, Chn, Data, End, Timeout); %% {ok,{exit_signal,Chn,Signal,Err,_Lang}}; {ssh_cm, SSH, {exit_status,Chn,Status}} -> debug("RECVD exit_status~n~p ~p~n~p", [SSH,Chn,Status]), do_recv_response(SSH, Chn, Data, End, Timeout); %% {ok,{exit_status,Chn,_Status}}; %% --- INTERACTIVE MESSAGES - NOT HANDLED --- %% %% {ssh_cm, SSH, {subsystem,Chn,WantReply,Name}} -> %% debug("RECVD SUBS WNTRPLY~n~p ~p~n~p~n~p", %% [SSH,Chn,WantReply]), %% ssh_connection:reply_request(SSH, WantReply, success, Chn), %% do_recv_response(SSH, Chn, Data, End, Timeout); %% {ssh_cm, SSH, {shell,WantReply}} -> %% debug("RECVD SHELL WNTRPLY~n~p ~p~n~p~n~p", %% [SSH,Chn,WantReply]), %% ssh_connection:reply_request(SSH, WantReply, success, Chn), %% do_recv_response(SSH,Chn,Data,End,Timeout); %% {ssh_cm, SSH, {pty,Chn,WantReply,Pty}} -> %% debug("RECVD PTY WNTRPLY~n~p ~p~n~p~n~p", %% [SSH,Chn,WantReply,Pty]), %% ssh_connection:reply_request(SSH, WantReply, success, Chn), %% do_recv_response(SSH, Chn, Data, End, Timeout); %% {ssh_cm, SSH, WCh={window_change,_Chn,_Width,_Height,_PixWidth,_PixHeight}} -> %% debug("RECVD WINCH"), %% {ok,WCh}; Other -> debug("UNEXPECTED MESSAGE~n~p ~p~n~tp", [SSH,Chn,Other]), do_recv_response(SSH, Chn, Data, End, Timeout) after Timeout -> case End of timeout -> {ok,Data}; _ -> {timeout,Data} end end. %%%----------------------------------------------------------------- %%% get_handle(SSH) when is_pid(SSH) -> {ok,SSH}; get_handle(SSH) -> case ct_util:get_connection(SSH, ?MODULE) of {ok,{Pid,_}} -> {ok,Pid}; {error,no_registered_connection} -> connect(SSH); Error -> Error end. %%%----------------------------------------------------------------- %%% call(SSH, Msg) -> call(SSH, Msg, infinity). call(SSH, Msg, Timeout) -> case get_handle(SSH) of {ok,Pid} -> ct_gen_conn:call(Pid, Msg, Timeout); Error -> Error end. %%%----------------------------------------------------------------- %%% ref(sftp, SSHRef) -> SSHRef; ref(Server, _) -> Server. %%%----------------------------------------------------------------- %%% mod(Cmd) -> [Op,_Server|Args] = tuple_to_list(Cmd), list_to_tuple([Op|Args]). %%%----------------------------------------------------------------- %%% heading(Function, Ref) -> io_lib:format("ct_ssh:~tw ~tp",[Function,Ref]). %%%----------------------------------------------------------------- %%% log(Heading, Str, Args) -> ct_gen_conn:log(Heading, Str, Args). %%%----------------------------------------------------------------- %%% try_log(Heading, Str, Args) -> try_log(Heading, Str, Args, infinity). try_log(Heading, Str, Args, Timeout) -> case ct_util:is_silenced(ssh, Timeout) of true -> ok; false -> ct_gen_conn:log(Heading, Str, Args); _Error -> ok end. %%%----------------------------------------------------------------- %%% debug(Str) -> debug(Str, []). debug(_Str, _Args) -> %% io:format("~n--- ct_ssh debug ---~n" ++ _Str ++ "~n", _Args), ok.