-*- html -*- EDoc overview page @author Richard Carlsson @copyright 2003-2006 Richard Carlsson @version {@version} @title Welcome to EDoc @doc EDoc is the Erlang program documentation generator. Inspired by the JavadocTM tool for the JavaTM programming language, EDoc is adapted to the conventions of the Erlang world, and has several features not found in Javadoc. == Contents ==
  1. {@section Introduction}
  2. {@section Running EDoc}
  3. {@section The overview page}
  4. {@section Generic tags}
  5. {@section Overview tags}
  6. {@section Module tags}
  7. {@section Function tags}
  8. {@section References}
  9. {@section Notes on XHTML}
  10. {@section Wiki notation}
  11. {@section Macro expansion}
  12. {@section Type specifications}
  13. {@section Acknowledgements}
== Introduction == EDoc lets you write the documentation of an Erlang program as comments in the source code itself, using tags on the form "`@Name ...'". A source file does not have to contain tags for EDoc to generate its documentation, but without tags the result will only contain the basic available information that can be extracted from the module. A tag must be the first thing on a comment line, except for leading '`%'' characters and whitespace. The comment must be between program declarations, and not on the same line as any program text. All the following text - including consecutive comment lines - up until the end of the comment or the next tagged line, is taken as the content of the tag. Tags are associated with the nearest following program construct "of significance" (the module name declaration and function definitions). Other constructs are ignored; e.g., in: ``` %% @doc Prints the value X. -record(foo, {x, y, z}). print(X) -> ... ''' the `@doc' tag is associated with the function `print/1'. Note that in a comment such as: ```% % @doc ...''' the tag is ignored, because only the first '`%'' character is considered "leading". This allows tags to be "commented out". Some tags, such as `@type', do not need to be associated with any program construct. These may be placed at the end of the file, in the "footer". == Running EDoc == The following are the main functions for running EDoc: Note that the function {@link edoc:file/2} belongs to the old, deprecated interface (from EDoc version 0.1), and should not be used. == The overview page == When documentation is generated for an entire application, an overview page, or "front page", is generated. (The page you are now reading is an overview page.) This should contain the high-level description or user manual for the application, leaving the finer details to the documentation for individual modules. By default, the overview page is generated from the file `overview.edoc' in the target directory (typically, this is the `doc' subdirectory of the application directory); see {@link edoc_doclet} for details. The format of the overview file is the same as for EDoc documentation comments (see {@section Introduction}), except that the lines do not have leading '`%'' characters. Furthermore, all lines before the first tag line are ignored, and can be used as a comment. All tags in the overview file, such as `@@doc', `@@version', etc., refer to the application as a whole; see {@section Overview tags} for details. Here is an example of the contents of an overview file: ```** this is the overview.doc file for the application 'frob' ** @@author R. J. Hacker @@copyright 2007 R. J. Hacker @@version 1.0.0 @@title Welcome to the `frob' application! @@doc `frob' is a highly advanced frobnicator with low latency, ... ''' == Generic tags == The following tags can be used anywhere within a module:
`@clear'
This tag causes all tags above it (up to the previous program construct), to be discarded, including the `@clear' tag itself. The text following the tag is also ignored. This is typically only useful in code containing conditional compilation, when preprocessing is turned on. (Preprocessing is turned off by default.) E.g., in ```-ifdef(DEBUG). %% @doc ... foo(...) -> ... -endif. %% @clear %% @doc ... bar(...) -> ...''' the `@clear' tag makes sure that EDoc does not see two `@doc' tags before the function `bar', even if the code for function `foo' is removed by preprocessing. (There is no way for EDoc to see what the first `@doc' tag "really" belongs to, since preprocessing strips away all such information.)
`@docfile'
Reads a plain documentation file (on the same format as an overview file - see {@section The overview page} for details), and uses the tags in that file as if they had been written in place of the `@docfile' tag. The content is the name of the file to be read; leading and trailing whitespace is ignored. See also `@headerfile'.
`@end'
The text following this tag is always ignored. Use this to mark the end of the previous tag, when necessary, as e.g. in: ```%% ---------------------------------- %% ... %% @doc ... %% ... %% @end %% ----------------------------------''' to avoid including the last "ruler" line in the `@doc' tag. Note: using some other "dummy" `@'-tag for the same purpose might work in a particular implementation of EDoc, but is not guaranteed to. Always use `@end' to ensure future compatibility.
`@headerfile'
Similar to the `@docfile' tag, but reads a file containing Erlang source code - generally this should be a header file (with the extension `.hrl'). If the file turns out to contain one or more function definitions or a module declaration, all tags that occur above the last such definition or module declaration are ignored, and EDoc will print a warning. This tag allows you to write documentation in a header file and insert it at a specific place in the documentation, even if the header file is used (i.e., included) by several modules. The `includes' option can be used to specify a search path (see {@link edoc:read_source/2}).
`@todo' (or `@TODO')
Attaches a To-Do note to a function, module or overview-page. The content can be any XHTML text describing the issue, e.g.: ```%% @TODO Finish writing the documentation.''' or ```%% @todo Implement RFC 2549.''' These tags can also be written as "`TODO:'", e.g.: ```%% TODO: call your mother''' see {@section Wiki notation} for more information. To-Do notes are normally not shown unless the `todo' option is turned on (see {@link edoc:get_doc/2}).
`@type'
Documents an abstract data type or type alias. The content consists of a type declaration or definition, optionally followed by a period ('`.'') separator and XHTML text describing the type (i.e., its purpose, use, etc.). There must be at least one whitespace character between the '`.'' and the text. See {@section Type specifications} for syntax and examples. All data type descriptions are placed in a separate section of the documentation, regardless of where the tags occur. Instead of specifying the complete type alias in an EDoc documentation comment, type definitions from the actual Erlang code can be re-used for documentation. See {@section Type specifications} for examples.
== Overview tags == The following tags can be used in an overview file.
`@author'
See the `@author' module tag for details.
`@copyright'
See the `@copyright' module tag for details.
`@doc'
See the `@doc' module tag for details.
`@reference'
See the `@reference' module tag for details.
`@see'
See the `@see' module tag for details.
`@since'
See the `@since' module tag for details.
`@title'
Specifies a title for the overview page. This tag can only be used in an overview file. The content can be arbitrary text.
`@version'
See the `@version' module tag for details.
== Module tags == The following tags can be used before a module declaration:
`@author'
Specifies the name of an author, along with contact information. An e-mail address can be given within `<...>' delimiters, and a URI within `[...]' delimiters. Both e-mail and URI are optional, and any surrounding whitespace is stripped from all strings. The name is the first nonempty string that is not within `<...>' or `[...]', and does not contain only whitespace. (In other words, the name can come before, between, or after the e-mail and URI, but cannot be split up; any sections after the first are ignored.) If an e-mail address is given, but no name, the e-mail string will be used also for the name. If no `<...>' section is present, but the name string contains an '`@'' character, it is assumed to be an e-mail address. Not both name and e-mail may be left out. Examples: ```%% @author Richard Carlsson''' ```%% @author Richard Carlsson %% [http://user.it.uu.se/~richardc/]''' ```%% @author ''' ```%% @author carlsson.richard@gmail.com [http://user.it.uu.se/~richardc/]'''
`@copyright'
Specifies the module copyrights. The content can be arbitrary text; for example: ``` %% @copyright 2001-2003 Richard Carlsson'''
`@deprecated'
Mark the module as deprecated, indicating that it should no longer be used. The content must be well-formed XHTML, and should preferably include a `@{@link}' reference to a replacement; as in: ``` %% @deprecated Please use the module @{@link foo} instead.'''
`@doc'
Describes the module, using well-formed XHTML text. The first sentence is used as a summary (see the `@doc' function tag for details). For example.: ```%% @doc This is a very useful module. It is ...'''
`@hidden'
Marks the module so that it will not appear in the documentation (even if "private" documentation is generated). Useful for sample code, test modules, etc. The content can be used as a comment; it is ignored by EDoc.
`@private'
Marks the module as private (i.e., not part of the public interface), so that it will not appear in the normal documentation. (If "private" documentation is generated, the module will be included.) The content can be used as a comment; it is ignored by EDoc.
`@reference'
Specifies a reference to some arbitrary external resource, such as an article, book, or web site. The content must be well-formed XHTML text. Examples: ```%% @reference Pratchett, T., Interesting Times, %% Victor Gollancz Ltd, 1994.''' ```%% @reference See Google for %% more information.'''
`@see'
See the `@see' function tag for details.
`@since'
Specifies when the module was introduced, with respect to the application, release or distribution it is part of. The content can be arbitrary text.
`@version'
Specifies the module version. The content can be arbitrary text.
== Function tags == The following tags can be used before a function definition:
`@deprecated'
See the `@deprecated' module tag for details.
`@doc'
XHTML text describing the function. The first sentence of the text is used as a quick summary; this ends at the first period character ('`.'') or exclamation mark ('`!'') that is followed by a whitespace character, a line break, or the end of the tag text, and is not within XML markup. (As an exception, the first sentence may be within an initial paragraph element)
`@equiv'
Specify equivalence to another function call/expression. The content must be a proper Erlang expression. If the expression is a function call, a cross-reference to the called function is created automatically. Typically, this tag is used instead of `@doc'.
`@hidden'
Marks the function so that it will not appear in the documentation (even if "private" documentation is generated). Useful for debug/test functions, etc. The content can be used as a comment; it is ignored by EDoc.
`@param'
Provide more information on a single parameter of the enclosing function. The content consists of a parameter name, followed by one or more whitespace characters, and XHTML text.
`@private'
Marks the function as private (i.e., not part of the public interface), so that it will not appear in the normal documentation. (If "private" documentation is generated, the function will be included.) Only useful for exported functions, e.g. entry points for `spawn'. (Non-exported functions are always "private".) The content can be used as a comment; it is ignored by EDoc.
`@returns'
Specify additional information about the value returned by the function. Content consists of XHTML text.
`@see'
Make a reference to a module, function, datatype, or application. (See {@section References}.) The content consists of a reference, optionally followed by a period ('`.''), one or more whitespace characters, and XHTML text to be used for the label; for example "`@see edoc'" or "`@see edoc. EDoc'". If no label text is specified, the reference itself is used as the label.
`@since'
Specifies in what version of the module the function was introduced; cf. the `@version' module tag. The content can be arbitrary text.
`@spec'
Used to specify the function type; see {@section Type specifications} for syntax details. If the function name is included in the specification, it must match the name in the actual code. When parameter names are not given in the specification, suitable names will be taken from the source code if possible, and otherwise synthesized. Instead of specifying the complete function type in an EDoc documentation comment, specifications from the actual Erlang code can be re-used for documentation. See {@section Type specifications} for examples.
`@throws'
Specifies which types of terms may be thrown by the function, if its execution terminates abruptly due to a call to `erlang:throw(Term)'. The content is a type expression (see {@section Type specifications}), and can be a union type. Note that exceptions of type `exit' (as caused by calls to `erlang:exit(Term)') and `error' (run-time errors such as `badarg' or `badarith') are not viewed as part of the normal interface of the function, and cannot be documented with the `@throws' tag.
`@type'
See the `@type' generic tag for details. Placing a `@type' tag by a function definition may be convenient, but does not affect where the description is placed in the generated documentation.
== References == In several contexts (`@see' tags, `@link' macros, etc.), EDoc lets you refer to the generated documentation for modules, functions, datatypes, and applications, using a simple and compact syntax. The possible formats for references are:
Reference syntaxExampleScope
`Module'{@link edoc_run}, `erl.lang.list'Global
`Function/Arity'`file/2'Within module
`Module:Function/Arity'{@link edoc:application/2}Global
`Type()'`filename()'Within module
`Module:Type()'{@link edoc:edoc_module()}Global
`//Application'{@link //edoc}Global
`//Application/Module'{@link //edoc/edoc_doclet}Global
`//Application/Module:Function/Arity'{@link //edoc/edoc_run:file/1}Global
`//Application/Module:Type()'{@link //edoc/edoc:edoc_module()}Global
EDoc will resolve references using the information it finds in `edoc-info'-files at the locations specified with the `doc_path' option. EDoc will automatically (and somewhat intelligently) try to find any local `edoc-info'-files using the current code path, and add them to the end of the `doc_path' list. The target doc-directory is also searched for an existing info file; this allows documentation to be built incrementally. (Use the `new' option to ignore any old info file.) Note that if the name of a module, function or datatype is explicitly qualified with an application (as in "`//edoc/edoc_run'"), this overrides any other information about that name, and the reference will be made relative to the location of the application (if it can be found). This makes it possible to refer to e.g. a module "`fred'" as "`//foo/fred'" without accidentally getting a reference to "`//bar/fred'". You should not use this form of explicit references for names that are local to the application you are currently creating - they will always be resolved correctly. Note that module-local references such as `file/2' only work properly within a module. In an overview-page like this (i.e., the one you are currently reading), no module context is available. == Notes on XHTML == In several places, XHTML markup can be used in the documentation text, in particular in `@doc' tags. The main differences from HTML are the following: To write an element like the HTML `
', which has no actual content, you can write either the full `

', or better, use the XHTML abbreviated form `
'. Since the purpose of EDoc is to document programs, there is also a limited form of "wiki"-syntax available for making program code easier to write inline (and to make the doc-comments easier to read). See {@section Wiki notation} for details. The HTML heading tags `h1' and `h2' are reserved for use by EDoc. Headings in documentation source code should start at `h3'. There is however a special syntax for writing headings which avoids using specific level numbers altogether; see {@section Headings} for details. EDoc uses {@link //xmerl. XMerL} to parse and export XML markup. == Wiki notation == When EDoc parses XHTML, it does additional pre- and post-processing of the text in order to expand certain notation specific to EDoc into proper XHTML markup. This "wiki" ([http://en.wikipedia.org/wiki/Wiki]) notation is intended to make it easier to write source code documentation. === Empty lines separate paragraphs === Leaving an empty line in XHTML text (i.e., a line which except for any leading start-of-comment '%' characters contains only whitespace), will make EDoc split the text before and after the empty line into separate paragraphs. For example: ```%% @doc This will all be part of the first paragraph. %% It can stretch over several lines and contain any %% XHTML markup. %% %% This is the second paragraph. The above line is %% regarded as "empty" by EDoc, even though it ends with %% a space.''' will generate the following text:

This will all be part of the first paragraph. It can stretch over several lines and contain any XHTML markup.

This is the second paragraph. The above line is regarded as "empty" by EDoc, even though it ends with a space.
Paragraph splitting takes place after the actual XHTML parsing. It only affects block-level text, and not e.g., text within `
' markup, or
text that is already within `

' markup. === Headings === Section headings, sub-headings, and sub-sub-headings, can be written using the following notation: ```== Heading == === Sub-heading === ==== Sub-sub-heading ====''' Such a heading must be alone on a line, except for whitespace, and cannot be split over several lines. A link target is automatically created for the heading, by replacing any whitespace within the text by a single underscore character. E.g., ```== Concerning Hobbits ==''' is equivalent to ```

Concerning Hobbits

''' Thus, headings using this notation should not contain characters that may not be part of URL labels, except for whitespace. If you need to create such headings, you have to use the explicit XHTML markup. A hypertext link to a heading written this way can be created using the `@section' macro, which transforms the argument text into a label as described above. E.g., ```@{@section Concerning Hobbits}''' is equivalent to writing ```Concerning Hobbits''' The above expansions take place before XML parsing. === External links === Writing a URL within brackets, as in "`[http://www.w3c.org/]'", will generate a hyperlink such as [http://www.w3c.org/], using the URL both for the destination and the label of the reference, equivalent to writing "`http://www.w3c.org/'". This short-hand keeps external URL references short and readable. The recognized protocols are `http', `ftp', and `file'. This expansion takes place before XML parsing. === TODO-notes === Lines that begin with the text "`TODO:'" (the colon is required) are recognized as tags, as if they had been written as "`@todo ...'" (see @todo tags for further details). === Verbatim quoting === In XHTML text, the '`' character (Unicode `000060', known as "grave accent" or "back-quote") can be used for verbatim quoting. This expansion takes place before XML parsing.
  • A character sequence "`...'" or "``...''" will be expanded to "`...'", where all occurrences of the special XML characters '`<'' and '`&'' (and for completeness, also '`>'') in the quoted text have been escaped to "`<'", "`&'", and "`>'", respectively. All whitespace is stripped from the beginning and end of the quoted text. Double back-quotes "``...''" can be used to quote text containing single '`` ' ''' characters. The automatic stripping of any surrounding whitespace makes it possible to write things like "`` 'foo@bar' ''". To quote text containing "''" verbatim, explicit `' markup or similar must be used.
  • A character sequence "```...'''" will be expanded to "`
    '", which disables all XML markup within the quoted text, and displays the result in fixed-font with preserved indentation. Whitespace is stripped from the end of the quoted text, but not from the beginning, except for whole leading lines of whitespace. This is useful for multi-line code examples, or displayed one-liners.
  • To produce a single '`'-character in XML without beginning a new quote, you can write "`'" (no space between the '`' and the '''). You can of course also use the XML character entity "``'".
Examples: ```%% @doc ...where the variable `Foo' refers to... ''' ```%% @doc ...returns the atom `` 'foo@erlang.org' ''... '''
     %% @doc ...use the command ```erl -name foo''' to...
     %% @doc ...as in the following code:
     %% ```f(X) ->
     %%       case X of
     %%          ...
     %%       end'''
     %% @doc ...or in the following:
     %% ```
     %%     g(X) ->
     %%       fun () -> ... end
     %% '''
== Macro expansion == Before the content of a tag is parsed, the text undergoes macro expansion. The syntax for macro calls is:
    @{@name}
or
    @{@name argument}
where name and argument are separated by one or more whitespace characters. The argument can be any text, which may contain other macro calls. The number of non-escaped "@{@" and "`}'" delimiters must be balanced. The argument text is first expanded in the current environment, and the result is bound to the macro parameter, written @{@?}. (If no argument is given, @{@?} is bound to the empty string.) The macro definition is then substituted for the call, and expansion continues over the resulting text. Recursive macro expansions are not allowed. === User-defined macros === Users can define their own macros by using the `def' EDoc option; see {@link edoc:file/2} and {@link edoc:get_doc/2} for more information. User-defined macros override predefined macros. === Predefined macros ===
@{@date}
Expands to the current date, as "Month Day Year", e.g. "{@date}".
@{@link reference. description}
This creates a hypertext link; cf. the `@see' function tag above for details. The description text (including the period separator) is optional; if no text is given, the reference itself is used. For example, @{@link edoc:file/2} creates the link {@link edoc:file/2}, and `@{@link edoc:file/2. this link}' creates {@link edoc:file/2. this link}.
@{@module}
Expands to the name of the current module. Only defined when a module is being processed.
@{@section heading}
Expands to a hypertext link to the specified section heading; see {@section Headings} for more information.
@{@time}
Expands to the current time, as "Hr:Min:Sec", e.g. "{@time}".
@{@type type-expression}
Formats a type expression within `...' markup and with hypertext links for data types. For example, @{@type {options, List::edoc:option_list()@@}} generates "{@type {options, List::edoc:option_list()@}}". (Cf. {@section Escape sequences}.)
@{@version}
Intended for use in `@version' tags. Defaults to a timestamp using `@{@date}' and `@{@time}'. Typically, this macro is redefined by the user when an official release of the application is generated.
=== Escape sequences === To prevent certain characters from being interpreted as delimiters, for example to produce the text "@{@" in the output, or use a '`}'' character in the argument text of a macro call, the following escape sequences may be used:
@@{
Expands to "`{'". Example: ``` %% @doc A macro call starts with the sequence "@@@{@".'''
@@}
Expands to "`}'". Example: ``` %% @doc ...@{@foo ...{Key, Value@@}...}...'''
@@@@
Expands to "`@'". Example: ``` %% @doc Contact us at support@@@@@{@hostname}''' Will generate the text "Contact us at support@vaporware.acme.com" if the macro `hostname' is bound to "`vaporware.acme.com'". Also: ``` %% @doc You might want to write something like %% @@@@foo that will expand to @@foo and does not start %% a new tag even if it appears first in a line.'''
== Type specifications == === Function specifications === Note that although the syntax described in the following can still be used for specifying functions we recommend that Erlang specifications as described in Types and Function Specification should be added to the source code instead. This way the analyses of Dialyzer's can be utilized in the process of keeping the documentation consistent and up-to-date. Erlang specifications will be used unless there is also a function specification (a `@spec' tag followed by a type) with the same name. The following grammar describes the form of the specifications following a `@spec' tag. A '`?'' suffix implies that the element is optional. Function types have higher precedence than union types; e.g., "`(atom()) -> atom() | integer()'" is parsed as `((atom()) -> atom()) | integer()', not as `(atom()) -> (atom() | integer())'.
Spec ::= FunType "where"? DefList?
| FunctionName FunType "where"? DefList?
FunctionName ::= Atom
FunType ::= "(" UnionTypes? ")" "->" UnionType
UnionTypes ::= UnionType
| UnionType "," UnionTypes
UnionType ::= UnionList
| Name "::" UnionList
Name ::= Variable
UnionList ::= Type
| Type "+" UnionList
| Type "|" UnionList
Type ::= TypeVariable
| Atom
| Integer
| Float
| Integer ".." Integer
| FunType
| "fun(" FunType ")"
| "fun(...)"
| "{" UnionTypes? "}"
| "#" Atom "{" Fields? "}"
| "[" "]"
| "[" UnionType "]"
| "[" UnionType "," "..." "]"
| "(" UnionType ")"
| BinType
| TypeName "(" UnionTypes? ")"
| ModuleName ":" TypeName "(" UnionTypes? ")"
| "//" AppName "/" ModuleName ":" TypeName "(" UnionTypes? ")"
Fields ::= Field
| Fields "," Fields
Field ::= Atom "=" UnionList
BinType ::= "<<>>"
| "<<" BaseType ">>"
| "<<" UnitType ">>"
| "<<" BaseType "," UnitType ">>"
BaseType ::= "_" ":" Integer
UnitType ::= "_" ":" "_" "*" Integer
TypeVariable ::= Variable
TypeName ::= Atom
ModuleName ::= Atom
| ModuleName "." Atom
AppName ::= Atom
DefList ::= Def
| DefList Def
| DefList "," Def
Def ::= TypeVariable "=" UnionList
| TypeName "(" TypeVariables? ")" "=" UnionType
TypeVariables ::= TypeVariable
| TypeVariable "," TypeVariables
Examples: ``` -spec my_function(X :: integer()) -> integer(). %% @doc Creates ...''' ``` %% @spec my_function(X::integer()) -> integer()''' ``` %% @spec (X::integer()) -> integer()''' ``` %% @spec sqrt(float()) -> float()''' ``` %% @spec pair(S, T) -> {S, T}''' ``` %% @spec append(List, List) -> List %% List = [term()]''' ``` %% @spec append(A::List, B::List) -> List %% List = [Item] %% Item = term()''' ``` %% @spec open(File::filename()) -> FileDescriptor %% where %% filename() = string() + atom(), %% FileDescriptor = term()''' ``` %% @spec close(graphics:window()) -> ok''' The first example shows the recommended way of specifying functions. In the above examples, `X', `A', `B', and `File' are parameter names, used for referring to the parameters from the documentation text. The type variables `S', `T' and `List' are used to simplify the type specifications, and may be supplied with definitions. It is also possible to give definitions for named types, which means that the name is simply an alias. (Use the `@type' tag to document abstract data types.) If a named type is defined in another module, it can be referred to as `Module:TypeName(...)'. Note that the keyword '`where'' is optional before a list of definitions, and that the definitions in the list may optionally be separated by '`,''. Both the '`|'' and the '`+'' character may be used to separate alternatives in union types; there is no semantic difference. Note that the notation `[Type]' means "proper (nil-terminated) list whose elements all belong to `Type'"; For example, `[atom()|integer()]' means the same thing as `[atom()+integer()]', i.e., a proper list of atoms and/or integers. If only a type variable is given for a parameter, as in "`pair(S, T) -> ...'", the same variable name may implicitly be used as the parameter name; there is no need to write "`pair(S::S, T::T) -> ...'". EDoc automatically extracts possible parameter names from the source code, to be used if no parameter name is given in the specification (or if the specification is missing altogether). If this fails, EDoc will generate a dummy parameter name, such as `X1'. This way, EDoc can often produce helpful documentation even for code that does not contain any annotations at all. === Type definitions === Note that although the syntax described in the following can still be used for specifying types we recommend that Erlang types as described in Types and Function Specification should be added to the source code instead. Erlang types will be used unless there is a type alias with the same name. The following grammar (see above for auxiliary definitions) describes the form of the definitions that may follow a `@type' tag:
Typedef ::= TypeName "(" TypeVariables? ")" DefList?
| TypeName "(" TypeVariables? ")" "=" UnionList DefList?
(For a truly abstract data type, no equivalence is specified.) The main definition may be followed by additional local definitions. Examples: ``` -type my_list(X) :: [X]. %% A special kind of lists ...''' ``` -opaque another_list(X) :: [X]. %% another_list() is a kind of list...''' ``` %% @type myList(X). A special kind of lists ...''' ``` %% @type filename() = string(). Atoms not allowed!''' ``` %% @type thing(A) = {thong, A} %% A = term(). %% A kind of wrapper type thingy.''' The first two examples show the recommended way of specifying types. === Pre-defined data types === The following data types are predefined by EDoc, and may not be redefined: ``` any() arity() atom() binary() bitstring() bool() (allowed, but use boolean() instead) boolean() byte() char() cons() deep_string() float() function() integer() iodata() iolist() list() maybe_improper_list() mfa() module() nil() neg_integer() node() non_neg_integer() nonempty_improper_list() nonempty_list() nonempty_maybe_improper_list() nonempty_string() none() number() pid() port() pos_integer() reference() string() term() timeout() tuple() ''' Details:
  • `any()' means "any Erlang data type". `term()' is simply an alias for `any()'.
  • `atom()', `binary()', `float()', `function()', `integer()', `pid()', `port()' and `reference()' are primitive data types of the Erlang programming language.
  • `boolean()' is the subset of `atom()' consisting of the atoms `true' and `false'.
  • `char()' is the subset of `integer()' representing Unicode character codes: hex 000000-10FFFF.
  • `tuple()' is the set of all tuples `{...}'.
  • `list(T)' is just an alias for `[T]'; list() is an alias for `list(any())', i.e., `[any()]'.
  • `nil()' is an alias for the empty list `[]'.
  • `cons(H,T)' is the list constructor. This is usually not used directly. It is possible to recursively define `list(T) := nil()+cons(T,list(T))'.
  • `string()' is an alias for `[char()]'.
  • `deep_string()' is recursively defined as `[char()+deep_string()]'.
  • `none()' means "no data type". E.g., a function that never returns has type `(...) -> none()'
== Acknowledgements == Since the first version of EDoc, several people have come up with suggestions (Luke Gorrie, Joe Armstrong, Erik Stenman, Sean Hinde, Ulf Wiger, ...), and some have even submitted code to demonstrate their ideas (Vlad Dumitrescu, Johan Blom, Vijay Hirani, ...). None of that code was actually included in the Great Rewriting that followed the initial public release (EDoc version 0.1), but most of the central points were addressed in the new system, such as better modularization and possibility to plug in different layout engines, and making EDoc understand the application directory layout. It is now getting too hard to keep track of all the people who have made further suggestions or submitted bug reports, but your input is always appreciated. Thank you.