@@copyright 2007 R. J. Hacker
@@version 1.0.0
@@title Welcome to the `frob' application!
@@doc `frob' is a highly advanced frobnicator with low latency,
...
'''
== Generic tags ==
The following tags can be used anywhere within a module:
- `@clear'
- This tag causes all tags above it (up to the previous program
construct), to be discarded, including the `@clear'
tag itself. The text following the tag
is also ignored. This is typically only useful in code
containing conditional compilation, when preprocessing is turned
on. (Preprocessing is turned off by default.) E.g., in
```-ifdef(DEBUG).
%% @doc ...
foo(...) -> ...
-endif.
%% @clear
%% @doc ...
bar(...) -> ...'''
the `@clear' tag makes sure that EDoc does not see
two `@doc' tags before the function `bar',
even if the code for function `foo' is removed by
preprocessing. (There is no way for EDoc to see what the first
`@doc' tag "really" belongs to, since preprocessing
strips away all such information.)
- `@docfile'
- Reads a plain documentation file (on the same format as an
overview file - see {@section The overview page} for details), and
uses the tags in that file as if they had been written in place of
the `@docfile' tag. The content is the name of the file to be
read; leading and trailing whitespace is ignored. See also `@headerfile'.
- `@end'
- The text following this tag is always ignored. Use this to
mark the end of the previous tag, when necessary, as e.g. in:
```%% ----------------------------------
%% ...
%% @doc ...
%% ...
%% @end
%% ----------------------------------'''
to avoid including the last "ruler" line in the
`@doc' tag.
Note: using some other "dummy" `@'-tag for
the same purpose might work in a particular implementation of
EDoc, but is not guaranteed to. Always use `@end'
to ensure future compatibility.
- `@headerfile'
- Similar to the `@docfile' tag, but
reads a file containing Erlang source code - generally this should
be a header file (with the extension `.hrl'). If the file turns
out to contain one or more function definitions or a module
declaration, all tags that occur above the last such definition or
module declaration are ignored, and EDoc will print a
warning. This tag allows you to write documentation in a header
file and insert it at a specific place in the documentation, even
if the header file is used (i.e., included) by several
modules. The `includes' option can be used to specify a search
path (see {@link edoc:read_source/2}).
- `@todo' (or `@TODO')
- Attaches a To-Do note to a function, module or
overview-page. The content can be any XHTML text describing
the issue, e.g.:
```%% @TODO Finish writing the documentation.'''
or
```%% @todo Implement RFC 2549.'''
These tags can also be written as "`TODO:'", e.g.:
```%% TODO: call your mother'''
see {@section Wiki notation} for more information. To-Do notes are
normally not shown unless the `todo' option is turned on (see
{@link edoc:get_doc/2}).
- `@type'
- Documents an abstract data type or type alias. The content
consists of a type declaration or definition, optionally
followed by a period ('`.'') separator and XHTML
text describing the type (i.e., its purpose, use, etc.). There
must be at least one whitespace character between the '`.'' and
the text. See {@section Type specifications} for syntax and
examples.
All data type descriptions are placed in a separate section of
the documentation, regardless of where the tags occur.
Instead of specifying the complete type alias in an EDoc
documentation comment, type definitions from the actual
Erlang code can be re-used for documentation.
See {@section Type specifications} for examples.
== Overview tags ==
The following tags can be used in an overview file.
- `@author'
- See the `@author' module tag for
details.
- `@copyright'
- See the `@copyright' module tag
for details.
- `@doc'
- See the `@doc' module tag for
details.
- `@reference'
- See the `@reference' module tag
for details.
- `@see'
- See the `@see' module tag for
details.
- `@since'
- See the `@since' module tag for
details.
- `@title'
- Specifies a title for the overview page. This tag can
only be used in an overview file. The content can be
arbitrary text.
- `@version'
- See the `@version' module
tag for details.
== Module tags ==
The following tags can be used before a module declaration:
- `@author'
- Specifies the name of an author, along with contact
information. An e-mail address can be given within `<...>'
delimiters, and a URI within `[...]' delimiters. Both e-mail and
URI are optional, and any surrounding whitespace is stripped from
all strings.
The name is the first nonempty string that is not within `<...>'
or `[...]', and does not contain only whitespace. (In other words,
the name can come before, between, or after the e-mail and URI,
but cannot be split up; any sections after the first are ignored.)
If an e-mail address is given, but no name, the e-mail string will
be used also for the name. If no `<...>' section is present, but
the name string contains an '`@'' character, it is assumed to be
an e-mail address. Not both name and e-mail may be left out.
Examples:
```%% @author Richard Carlsson'''
```%% @author Richard Carlsson
%% [http://user.it.uu.se/~richardc/]'''
```%% @author '''
```%% @author carlsson.richard@gmail.com [http://user.it.uu.se/~richardc/]'''
- `@copyright'
- Specifies the module copyrights. The content can be
arbitrary text; for example:
```
%% @copyright 2001-2003 Richard Carlsson'''
- `@deprecated'
- Mark the module as deprecated, indicating that it should no
longer be used. The content must be well-formed XHTML, and should
preferably include a `@{@link}' reference to a
replacement; as in:
```
%% @deprecated Please use the module @{@link foo} instead.'''
- `@doc'
- Describes the module, using well-formed XHTML text. The
first sentence is used as a summary (see the
`@doc' function tag for details). For
example.:
```%% @doc This is a very useful module. It is ...'''
- `@hidden'
- Marks the module so that it will not appear in the
documentation (even if "private" documentation is generated).
Useful for sample code, test modules, etc. The content can be
used as a comment; it is ignored by EDoc.
- `@private'
- Marks the module as private (i.e., not part of the public
interface), so that it will not appear in the normal
documentation. (If "private" documentation is generated, the
module will be included.) The content can be used as a comment; it
is ignored by EDoc.
- `@reference'
- Specifies a reference to some arbitrary external resource,
such as an article, book, or web site. The content must be
well-formed XHTML text. Examples:
```%% @reference Pratchett, T., Interesting Times,
%% Victor Gollancz Ltd, 1994.'''
```%% @reference See Google for
%% more information.'''
- `@see'
- See the `@see' function tag
for details.
- `@since'
- Specifies when the module was introduced, with respect to
the application, release or distribution it is part
of. The content can be arbitrary text.
- `@version'
- Specifies the module version. The content can be arbitrary
text.
== Function tags ==
The following tags can be used before a function definition:
- `@deprecated'
- See the `@deprecated'
module tag for details.
- `@doc'
- XHTML text describing the function. The first
sentence of the text is used as a quick summary; this ends at
the first period character ('`.'') or exclamation mark
('`!'') that is followed by a whitespace character, a
line break, or the end of the tag text, and is not within XML
markup. (As an exception, the first sentence may be within an
initial paragraph element)
- `@equiv'
- Specify equivalence to another function call/expression.
The content must be a proper Erlang expression. If the
expression is a function call, a cross-reference to the called
function is created automatically. Typically, this tag is used
instead of `@doc'.
- `@hidden'
- Marks the function so that it will not appear in the
documentation (even if "private" documentation is generated).
Useful for debug/test functions, etc. The content can be
used as a comment; it is ignored by EDoc.
- `@param'
- Provide more information on a single parameter of the
enclosing function. The content consists of a parameter name,
followed by one or more whitespace characters, and XHTML text.
- `@private'
- Marks the function as private (i.e., not part of the public
interface), so that it will not appear in the normal
documentation. (If "private" documentation is generated, the
function will be included.) Only useful for exported functions,
e.g. entry points for `spawn'. (Non-exported functions are
always "private".) The content can be used as a comment; it is
ignored by EDoc.
- `@returns'
- Specify additional information about the value returned by
the function. Content consists of XHTML text.
- `@see'
- Make a reference to a module, function, datatype, or
application. (See {@section References}.)
The content consists of a reference, optionally followed by a
period ('`.''), one or more whitespace characters, and
XHTML text to be used for the label; for example "`@see edoc'" or
"`@see edoc. EDoc'". If no label text is specified, the
reference itself is used as the label.
- `@since'
- Specifies in what version of the module the function was
introduced; cf. the
`@version'
module tag. The content can be arbitrary text.
- `@spec'
- Used to specify the function type; see {@section Type
specifications} for syntax details. If the function name is
included in the specification, it must match the name in the
actual code. When parameter names are not given in the
specification, suitable names will be taken from the source
code if possible, and otherwise synthesized.
Instead of specifying the complete function type in an EDoc
documentation comment, specifications from the actual
Erlang code can be re-used for documentation.
See {@section Type specifications} for examples.
- `@throws'
- Specifies which types of terms may be thrown by the
function, if its execution terminates abruptly due to a call to
`erlang:throw(Term)'. The content is a type expression (see {@section
Type specifications}), and can be a union type.
Note that exceptions of type `exit' (as caused by calls to
`erlang:exit(Term)') and `error' (run-time errors such as `badarg'
or `badarith') are not viewed as part of the normal interface of
the function, and cannot be documented with the `@throws' tag.
- `@type'
- See the `@type' generic tag
for details. Placing a `@type' tag by a function
definition may be convenient, but does not affect where the
description is placed in the generated documentation.
== References ==
In several contexts (`@see' tags, `@link' macros, etc.), EDoc lets
you refer to the generated documentation for modules, functions,
datatypes, and applications, using a simple and compact syntax. The
possible formats for references are:
| Reference syntax | Example | Scope |
|---|
| `Module' | {@link edoc_run}, `erl.lang.list' | Global |
| `Function/Arity' | `file/2' | Within module |
| `Module:Function/Arity' | {@link edoc:application/2} | Global |
| `Type()' | `filename()' | Within module |
| `Module:Type()' | {@link edoc:edoc_module()} | Global |
| `//Application' | {@link //edoc} | Global |
| `//Application/Module' | {@link //edoc/edoc_doclet} | Global |
| `//Application/Module:Function/Arity' | {@link //edoc/edoc_run:file/1} | Global |
| `//Application/Module:Type()' | {@link //edoc/edoc:edoc_module()} | Global |
EDoc will resolve references using the information it finds in
`edoc-info'-files at the locations specified with the `doc_path'
option. EDoc will automatically (and somewhat intelligently) try to find
any local `edoc-info'-files using the current code path, and add them to
the end of the `doc_path' list. The target doc-directory is also
searched for an existing info file; this allows documentation to be
built incrementally. (Use the `new' option to ignore any old info
file.)
Note that if the name of a module, function or datatype is explicitly
qualified with an application (as in "`//edoc/edoc_run'"), this
overrides any other information about that name, and the reference will
be made relative to the location of the application (if it can be
found). This makes it possible to refer to e.g. a module "`fred'" as
"`//foo/fred'" without accidentally getting a reference to
"`//bar/fred'". You should not use this form of explicit references for
names that are local to the application you are currently creating -
they will always be resolved correctly.
Note that module-local references such as `file/2' only work properly
within a module. In an overview-page like this (i.e., the one you are
currently reading), no module context is available.
== Notes on XHTML ==
In several places, XHTML markup can be used in the documentation
text, in particular in `@doc' tags. The main differences from
HTML are the following:
- All elements must have explicit start and end tags, and be
correctly nested. This means that you cannot e.g. write a
`
- ' tag without also writing a corresponding `
'
tag in the right place. This could be an annoyance
at times, but has the great advantage that EDoc can report all
malformed XHTML in your source code, rather than propagate the
errors to the generated documentation.
- XHTML tag and attribute names should always be lower-case.
- Attributes must be quoted, as in e.g. `'.
To write an element like the HTML `
', which has no actual content,
you can write either the full `
', or better, use the XHTML
abbreviated form `
'.
Since the purpose of EDoc is to document programs, there is also a
limited form of "wiki"-syntax available for making program code easier
to write inline (and to make the doc-comments easier to read).
See {@section Wiki notation} for details.
The HTML heading tags `h1' and `h2' are reserved for use by EDoc.
Headings in documentation source code should start at `h3'. There is
however a special syntax for writing headings which avoids using
specific level numbers altogether; see {@section Headings} for details.
EDoc uses {@link //xmerl. XMerL} to parse and export XML markup.
== Wiki notation ==
When EDoc parses XHTML, it does additional pre- and post-processing of
the text in order to expand certain notation specific to EDoc into
proper XHTML markup. This "wiki" ([http://en.wikipedia.org/wiki/Wiki])
notation is intended to make it easier to write source code
documentation.
=== Empty lines separate paragraphs ===
Leaving an empty line in XHTML text (i.e., a line which except for
any leading start-of-comment '%' characters contains only
whitespace), will make EDoc split the text before and
after the empty line into separate paragraphs. For example:
```%% @doc This will all be part of the first paragraph.
%% It can stretch over several lines and contain any
%% XHTML markup.
%%
%% This is the second paragraph. The above line is
%% regarded as "empty" by EDoc, even though it ends with
%% a space.'''
will generate the following text:
This will all be part of the first paragraph. It can
stretch over several lines and contain any XHTML markup.
This is the second paragraph. The above line is regarded as "empty" by
EDoc, even though it ends with a space.
Paragraph splitting takes place after the actual XHTML parsing. It only
affects block-level text, and not e.g., text within `' markup, or
text that is already within `' markup.
=== Headings ===
Section headings, sub-headings, and sub-sub-headings, can be written
using the following notation:
```== Heading ==
=== Sub-heading ===
==== Sub-sub-heading ===='''
Such a heading must be alone on a line, except for whitespace, and
cannot be split over several lines. A link target is automatically
created for the heading, by replacing any whitespace within the text by
a single underscore character. E.g.,
```== Concerning Hobbits =='''
is equivalent to
```
'''
Thus, headings using this notation should not contain characters that
may not be part of URL labels, except for whitespace. If you need to
create such headings, you have to use the explicit XHTML markup.
A hypertext link to a heading written this way can be created using the
`@section' macro, which transforms the argument text into a label as
described above. E.g.,
```@{@section Concerning Hobbits}'''
is equivalent to writing
```Concerning Hobbits'''
The above expansions take place before XML parsing.
=== External links ===
Writing a URL within brackets, as in "`[http://www.w3c.org/]'", will
generate a hyperlink such as [http://www.w3c.org/], using the URL both
for the destination and the label of the reference, equivalent to writing
"`http://www.w3c.org/'". This
short-hand keeps external URL references short and readable. The
recognized protocols are `http', `ftp', and `file'. This expansion takes
place before XML parsing.
=== TODO-notes ===
Lines that begin with the text "`TODO:'" (the colon is required) are
recognized as tags, as if they had been written as "`@todo ...'" (see @todo tags for further details).
=== Verbatim quoting ===
In XHTML text, the '`' character (Unicode `000060',
known as "grave accent" or "back-quote") can be used for verbatim
quoting. This expansion takes place before XML parsing.
- A character sequence "
`...'" or
"``...''" will be expanded to
"`...'", where all occurrences of the special XML
characters '`<'' and '`&'' (and for completeness, also '`>'') in
the quoted text have been escaped to "`<'", "`&'", and
"`>'", respectively.
All whitespace is stripped from the beginning and end of the
quoted text.
Double back-quotes "``...''" can be used
to quote text containing single '`` ' ''' characters. The automatic
stripping of any surrounding whitespace makes it possible to write
things like "`` 'foo@bar' ''".
To quote text containing "''" verbatim,
explicit `' markup or similar must be used.
- A character sequence "
```...'''"
will be expanded to "`'", which disables
all XML markup within the quoted text, and displays the result in
fixed-font with preserved indentation. Whitespace is stripped from
the end of the quoted text, but not from the beginning, except for
whole leading lines of whitespace. This is
useful for multi-line code examples, or displayed
one-liners.
- To produce a single '
`'-character in XML
without beginning a new quote, you can write "`'"
(no space between the '`' and the ''').
You can of course also use the XML character entity
"``'".
Examples:
```%% @doc ...where the variable `Foo' refers to... '''
```%% @doc ...returns the atom `` 'foo@erlang.org' ''... '''
%% @doc ...use the command ```erl -name foo''' to...
%% @doc ...as in the following code:
%% ```f(X) ->
%% case X of
%% ...
%% end'''
%% @doc ...or in the following:
%% ```
%% g(X) ->
%% fun () -> ... end
%% '''
== Macro expansion ==
Before the content of a tag is parsed, the text undergoes macro
expansion. The syntax for macro calls is:
@{@name}
or
@{@name argument}
where name and argument are separated by one or more
whitespace characters. The argument can be any text, which may contain
other macro calls. The number of non-escaped "@{@" and
"`}'" delimiters must be balanced.
The argument text is first expanded in the current environment, and
the result is bound to the macro parameter, written
@{@?}. (If no argument is given, @{@?} is
bound to the empty string.) The macro definition is then substituted
for the call, and expansion continues over the resulting text. Recursive
macro expansions are not allowed.
=== User-defined macros ===
Users can define their own macros by using the `def' EDoc
option; see {@link edoc:file/2} and {@link edoc:get_doc/2} for more
information. User-defined macros override predefined macros.
=== Predefined macros ===
@{@date}- Expands to the current date, as "Month Day Year",
e.g. "{@date}".
@{@link reference.
description}- This creates a hypertext link; cf. the
`@see' function tag above for
details. The description text (including the period separator)
is optional; if no text is given, the reference itself is
used. For example,
@{@link edoc:file/2} creates the
link {@link edoc:file/2}, and `@{@link edoc:file/2. this link}'
creates {@link edoc:file/2. this link}.
@{@module}- Expands to the name of the current module. Only defined when a
module is being processed.
@{@section
heading}- Expands to a hypertext link to the specified section heading;
see {@section Headings} for more information.
@{@time}- Expands to the current time, as "Hr:Min:Sec",
e.g. "{@time}".
@{@type
type-expression}- Formats a type expression within `
...'
markup and with hypertext links for data types. For example,
@{@type {options, List::edoc:option_list()@@}}
generates "{@type {options, List::edoc:option_list()@}}". (Cf.
{@section Escape sequences}.)
@{@version}- Intended for use in `@version'
tags. Defaults to a timestamp using `@{@date}' and `@{@time}'.
Typically, this macro is redefined by the user when an official
release of the application is generated.
=== Escape sequences ===
To prevent certain characters from being interpreted as delimiters,
for example to produce the text "@{@" in the output, or use a
'`}'' character in the argument text of a macro call, the
following escape sequences may be used:
@@{- Expands to "`{'". Example:
```
%% @doc A macro call starts with the sequence "@@@{@".'''
@@}- Expands to "`}'". Example:
```
%% @doc ...@{@foo ...{Key, Value@@}...}...'''
@@@@- Expands to "`@'". Example:
```
%% @doc Contact us at support@@@@@{@hostname}'''
Will generate the text "Contact us at support@vaporware.acme.com"
if the macro `hostname' is bound to
"`vaporware.acme.com'". Also:
```
%% @doc You might want to write something like
%% @@@@foo that will expand to @@foo and does not start
%% a new tag even if it appears first in a line.'''
== Type specifications ==
=== Function specifications ===
Note that although the syntax described in the following can still be used
for specifying functions we recommend that Erlang specifications as
described in Types
and Function Specification should be added to the source
code instead. This way the analyses of Dialyzer's can be utilized in the
process of keeping the documentation consistent and up-to-date.
Erlang specifications will be used unless there is also a function
specification (a `@spec' tag followed by a type) with the same name.
The following grammar describes the form of the specifications following
a `@spec' tag. A '`?'' suffix implies that the element is optional.
Function types have higher precedence than union types; e.g., "`(atom())
-> atom() | integer()'" is parsed as `((atom()) -> atom()) | integer()',
not as `(atom()) -> (atom() | integer())'.
Spec |
::= |
FunType "where"? DefList?
| FunctionName FunType "where"? DefList? |
FunctionName |
::= |
Atom |
FunType |
::= |
"(" UnionTypes? ")" "->" UnionType |
UnionTypes |
::= |
UnionType
| UnionType "," UnionTypes |
UnionType |
::= |
UnionList
| Name "::" UnionList |
Name |
::= |
Variable |
UnionList |
::= |
Type
| Type "+" UnionList
| Type "|" UnionList |
Type |
::= |
TypeVariable
| Atom
| Integer
| Float
| Integer ".." Integer
| FunType
| "fun(" FunType ")"
| "fun(...)"
| "{" UnionTypes? "}"
| "#" Atom "{" Fields? "}"
| "[" "]"
| "[" UnionType "]"
| "[" UnionType "," "..." "]"
| "(" UnionType ")"
| BinType
| TypeName "(" UnionTypes? ")"
| ModuleName ":" TypeName "(" UnionTypes? ")"
| "//" AppName "/" ModuleName ":" TypeName "(" UnionTypes? ")" |
Fields |
::= |
Field
| Fields "," Fields |
Field |
::= |
Atom "=" UnionList |
BinType |
::= |
"<<>>"
| "<<" BaseType ">>"
| "<<" UnitType ">>"
| "<<" BaseType "," UnitType ">>" |
BaseType |
::= |
"_" ":" Integer |
UnitType |
::= |
"_" ":" "_" "*" Integer |
TypeVariable |
::= |
Variable |
TypeName |
::= |
Atom |
ModuleName |
::= |
Atom
| ModuleName "." Atom |
AppName |
::= |
Atom |
DefList |
::= |
Def
| DefList Def
| DefList "," Def |
Def |
::= |
TypeVariable "=" UnionList
| TypeName "(" TypeVariables? ")" "=" UnionType |
TypeVariables |
::= |
TypeVariable
| TypeVariable "," TypeVariables |
Examples:
```
-spec my_function(X :: integer()) -> integer().
%% @doc Creates ...'''
```
%% @spec my_function(X::integer()) -> integer()'''
```
%% @spec (X::integer()) -> integer()'''
```
%% @spec sqrt(float()) -> float()'''
```
%% @spec pair(S, T) -> {S, T}'''
```
%% @spec append(List, List) -> List
%% List = [term()]'''
```
%% @spec append(A::List, B::List) -> List
%% List = [Item]
%% Item = term()'''
```
%% @spec open(File::filename()) -> FileDescriptor
%% where
%% filename() = string() + atom(),
%% FileDescriptor = term()'''
```
%% @spec close(graphics:window()) -> ok'''
The first example shows the recommended way of specifying functions.
In the above examples, `X', `A', `B',
and `File' are parameter names, used for referring to the
parameters from the documentation text. The type variables
`S', `T' and `List' are used to
simplify the type specifications, and may be supplied with
definitions. It is also possible to give definitions for named types,
which means that the name is simply an alias. (Use the
`@type' tag to document abstract data types.) If a named type
is defined in another module, it can be referred to as
`Module:TypeName(...)'. Note that the keyword '`where'' is optional
before a list of definitions, and that the definitions in the list may
optionally be separated by '`,''.
Both the '`|'' and the '`+'' character may be
used to separate alternatives in union types; there is no semantic
difference. Note that the notation `[Type]' means "proper
(nil-terminated) list whose elements all belong to `Type'";
For example, `[atom()|integer()]' means the same thing as
`[atom()+integer()]', i.e., a proper list of atoms and/or
integers.
If only a type variable is given for a parameter, as in
"`pair(S, T) -> ...'", the same variable name may implicitly
be used as the parameter name; there is no need to write
"`pair(S::S, T::T) -> ...'".
EDoc automatically extracts possible parameter names from the source
code, to be used if no parameter name is given in the specification (or
if the specification is missing altogether). If this fails, EDoc will
generate a dummy parameter name, such as `X1'. This way, EDoc
can often produce helpful documentation even for code that does not
contain any annotations at all.
=== Type definitions ===
Note that although the syntax described in the following can still be used
for specifying types we recommend that Erlang types as described in
Types and Function
Specification should be added to the source code instead.
Erlang types will be used unless there is a type alias with the same
name.
The following grammar (see above for auxiliary definitions) describes
the form of the definitions that may follow a `@type' tag:
Typedef |
::= |
TypeName "(" TypeVariables? ")" DefList?
| TypeName "(" TypeVariables? ")" "=" UnionList DefList? |
(For a truly abstract data type, no equivalence is specified.) The main
definition may be followed by additional local definitions. Examples:
```
-type my_list(X) :: [X]. %% A special kind of lists ...'''
```
-opaque another_list(X) :: [X].
%% another_list() is a kind of list...'''
```
%% @type myList(X). A special kind of lists ...'''
```
%% @type filename() = string(). Atoms not allowed!'''
```
%% @type thing(A) = {thong, A}
%% A = term().
%% A kind of wrapper type thingy.'''
The first two examples show the recommended way of specifying types.
=== Pre-defined data types ===
The following data types are predefined by EDoc, and may not be
redefined:
```
any()
arity()
atom()
binary()
bitstring()
bool() (allowed, but use boolean() instead)
boolean()
byte()
char()
cons()
deep_string()
float()
function()
integer()
iodata()
iolist()
list()
maybe_improper_list()
mfa()
module()
nil()
neg_integer()
node()
non_neg_integer()
nonempty_improper_list()
nonempty_list()
nonempty_maybe_improper_list()
nonempty_string()
none()
number()
pid()
port()
pos_integer()
reference()
string()
term()
timeout()
tuple()
'''
Details:
- `any()' means "any Erlang data type".
`term()' is simply an alias for `any()'.
- `atom()', `binary()',
`float()', `function()',
`integer()', `pid()', `port()'
and `reference()' are primitive data types of
the Erlang programming language.
- `boolean()' is the subset of `atom()' consisting
of the atoms `true' and `false'.
- `char()' is the subset of `integer()' representing
Unicode character codes: hex 000000-10FFFF.
- `tuple()' is the set of all tuples `{...}'.
- `list(T)' is just an alias for `[T]'; list() is an alias
for `list(any())', i.e., `[any()]'.
- `nil()' is an alias for the empty list `[]'.
- `cons(H,T)' is the list constructor. This is usually not
used directly. It is possible to recursively define `list(T)
:= nil()+cons(T,list(T))'.
- `string()' is an alias for `[char()]'.
- `deep_string()' is recursively defined as
`[char()+deep_string()]'.
- `none()' means "no data type". E.g., a function
that never returns has type `(...) -> none()'
== Acknowledgements ==
Since the first version of EDoc, several people have come up with
suggestions (Luke Gorrie, Joe Armstrong, Erik Stenman, Sean Hinde, Ulf
Wiger, ...), and some have even submitted code to demonstrate their
ideas (Vlad Dumitrescu, Johan Blom, Vijay Hirani, ...). None of that
code was actually included in the Great Rewriting that followed the
initial public release (EDoc version 0.1), but most of the central
points were addressed in the new system, such as better modularization
and possibility to plug in different layout engines, and making EDoc
understand the application directory layout.
It is now getting too hard to keep track of all the people who have made
further suggestions or submitted bug reports, but your input is always
appreciated. Thank you.