The El Library User's Guide

20022016 Ericsson AB. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. The El Library User's Guide Kent Boortz Kent Boortz ei_users_guide.xml

The Erl_Interface library contains functions. which help you integrate programs written in C and Erlang. The functions in Erl_Interface support the following:

manipulation of data represented as Erlang data types conversion of data between C and Erlang formats encoding and decoding of Erlang data types for transmission or storage communication between C nodes and Erlang processes backup and restore of C node state to and from Mnesia

In the following sections, these topics are described:

compiling your code for use with Erl_Interface initializing Erl_Interface encoding, decoding, and sending Erlang terms building terms and patterns pattern matching connecting to a distributed Erlang node using EPMD sending and receiving Erlang messages remote procedure calls global names the registry

Compiling and Linking Your Code

In order to use any of the Erl_Interface functions, include the following lines in your code:

Determine where the top directory of your OTP installation is. You can find this out by starting Erlang and entering the following command at the Eshell prompt:

 code:root_dir().
/usr/local/otp    ]]>

To compile your code, make sure that your C compiler knows where to find by specifying an appropriate argument on the command line, or by adding it to the definition in your . The correct value for this path is Vsn, where is the path reported by in the above example, and Vsn is the version of the Erl_interface application, for example

When linking, you will need to specify the path to and with , and you will need to specify the name of the libraries with . You can do this on the command line or by adding the flags to the definition in your .

Also, on some systems it may be necessary to link with some additional libraries (e.g. and on Solaris, or on Windows) in order to use the communication facilities of Erl_Interface.

If you are using Erl_Interface functions in a threaded application based on POSIX threads or Solaris threads, then Erl_Interface needs access to some of the synchronization facilities in your threads package, and you will need to specify additional compiler flags in order to indicate which of the packages you are using. Define and either or . The default is to use POSIX threads if is specified.

Initializing the erl_interface Library

Before calling any of the other Erl_Interface functions, you must call exactly once to initialize the library. takes two arguments, however the arguments are no longer used by Erl_Interface, and should therefore be specified as .

Encoding, Decoding and Sending Erlang Terms

Data sent between distributed Erlang nodes is encoded in the Erlang external format. Consequently, you have to encode and decode Erlang terms into byte streams if you want to use the distribution protocol to communicate between a C program and Erlang.

The Erl_Interface library supports this activity. It has a number of C functions which create and manipulate Erlang data structures. The library also contains an encode and a decode function. The example below shows how to create and encode an Erlang tuple :

Alternatively, you can use and , which handle the encoding and decoding of messages transparently.

Refer to the Reference Manual for a complete description of the following modules:

the module for creating Erlang terms the module for encoding and decoding routines.

Building Terms and Patterns

The previous example can be simplified by using to create an Erlang term.

Refer to the Reference Manual, the module, for a full description of the different format directives. The following example is more complex:

As in previous examples, it is your responsibility to free the memory allocated for Erlang terms. In this example, ensures that the complete term pointed to by is released. This is necessary, because the pointer from the second call to is lost.

The following example shows a slightly different solution:

In this case, you free the two terms independently. The order in which you free the terms and is not important, because the Erl_Interface library uses reference counting to determine when it is safe to actually remove objects.

If you are not sure whether you have freed the terms properly, you can use the following function to see the status of the fixed term allocator:

Refer to the Reference Manual, the module for more information.

Pattern Matching

An Erlang pattern is a term that may contain unbound variables or symbols. Such a pattern can be matched against a term and, if the match is successful, any unbound variables in the pattern will be bound as a side effect. The content of a bound variable can then be retrieved.

is used to perform pattern matching. It takes a pattern and a term and tries to match them. As a side effect any unbound variables in the pattern will be bound. In the following example, we create a pattern with a variable Age which appears at two positions in the tuple. The pattern match is performed as follows:

will bind the contents of Age to 21 the first time it reaches the variable the second occurrence of Age will cause a test for equality between the terms since Age is already bound to 21. Since Age is bound to 21, the equality test will succeed and the match continues until the end of the pattern. if the end of the pattern is reached, the match succeeds and you can retrieve the contents of the variable

Refer to the Reference Manual, the function for more information.

Connecting to a Distributed Erlang Node

In order to connect to a distributed Erlang node you need to first initialize the connection routine with , which stores information such as the host name, node name, and IP address for later use:

Refer to the Reference Manual, the module for more information.

After initialization, you set up the connection to the Erlang node. Use to specify the Erlang node you want to connect to. The following example sets up the connection and should result in a valid socket file descriptor:

prints the specified string and terminates the program. Refer to the Reference Manual, the function for more information.

Using EPMD

is the Erlang Port Mapper Daemon. Distributed Erlang nodes register with on the localhost to indicate to other nodes that they exist and can accept connections. maintains a register of node and port number information, and when a node wishes to connect to another node, it first contacts in order to find out the correct port number to connect to.

When you use to connect to an Erlang node, a connection is first made to and, if the node is known, a connection is then made to the Erlang node.

C nodes can also register themselves with if they want other nodes in the system to be able to find and connect to them.

Before registering with , you need to first create a listen socket and bind it to a port. Then:

is a file descriptor now connected to . monitors the other end of the connection, and if it detects that the connection has been closed, the node will be unregistered. So, if you explicitly close the descriptor or if your node fails, it will be unregistered from .

Be aware that on some systems (such as VxWorks), a failed node will not be detected by this mechanism since the operating system does not automatically close descriptors that were left open when the node failed. If a node has failed in this way, will prevent you from registering a new node with the old name, since it thinks that the old name is still in use. In this case, you must unregister the name explicitly:

This will cause to close the connection from the far end. Note that if the name was in fact still in use by a node, the results of this operation are unpredictable. Also, doing this does not cause the local end of the connection to close, so resources may be consumed.

Sending and Receiving Erlang Messages

Use one of the following two functions to send messages:

As in Erlang, it is possible to send messages to a Pid or to a registered name. It is easier to send a message to a registered name because it avoids the problem of finding a suitable Pid.

Use one of the following two functions to receive messages:

receives the message into a buffer, while decodes the message into an Erlang term.

Example of Sending Messages

In the following example, is sent to a registered process . The message is encoded by :

The first element of the tuple that is sent is your own Pid. This enables to reply. Refer to the Reference Manual, the module for more information about send primitives.

Example of Receiving Messages

In this example is received. The received Pid is then used to return

In order to provide robustness, a distributed Erlang node occasionally polls all its connected neighbours in an attempt to detect failed nodes or communication links. A node which receives such a message is expected to respond immediately with an message. This is done automatically by , however when this has occurred returns to the caller without storing a message into the structure.

When a message has been received, it is the caller's responsibility to free the received message as well as or , depending on the type of message received.

Refer to the Reference Manual for additional information about the following modules:

Remote Procedure Calls

An Erlang node acting as a client to another Erlang node typically sends a request and waits for a reply. Such a request is included in a function call at a remote node and is called a remote procedure call. The following example shows how the Erl_Interface library supports remote procedure calls:

 when compiling file: %s.erl !\n", modname);
erl_free_term(ep);
ep = erl_format("{ok,_}");
if (!erl_match(ep, reply))
  erl_err_msg(" compiler errors !\n");
erl_free_term(ep);
erl_free_term(reply);    ]]>

is called to compile the specified module on the remote node. checks that the compilation was successful by testing for the expected .

Refer to the Reference Manual, the module for more information about , and its companions and .

Using Global Names

A C node has access to names registered through the Erlang Global module. Names can be looked up, allowing the C node to send messages to named Erlang services. C nodes can also register global names, allowing them to provide named services to Erlang processes or other C nodes.

Erl_Interface does not provide a native implementation of the global service. Instead it uses the global services provided by a "nearby" Erlang node. In order to use the services described in this section, it is necessary to first open a connection to an Erlang node.

To see what names there are:

allocates and returns a buffer containing all the names known to global. will be initialized to indicate how many names are in the array. The array of strings in names is terminated by a NULL pointer, so it is not necessary to use to determine when the last name is reached.

It is the caller's responsibility to free the array. allocates the array and all of the strings using a single call to , so is all that is necessary.

To look up one of the names:

If is known to global, an Erlang pid is returned that can be used to send messages to the schedule service. Additionally, will be initialized to contain the name of the node where the service is registered, so that you can make a connection to it by simply passing the variable to .

Before registering a name, you should already have registered your port number with . This is not strictly necessary, but if you neglect to do so, then other nodes wishing to communicate with your service will be unable to find or connect to your process.

Create a pid that Erlang processes can use to communicate with your service:

After registering the name, you should use to wait for incoming connections.

Do not forget to free later with !

To unregister a name:

The Registry

This section describes the use of the registry, a simple mechanism for storing key-value pairs in a C-node, as well as backing them up or restoring them from a Mnesia table on an Erlang node. More detailed information about the individual API functions can be found in the Reference Manual.

Keys are strings, i.e. 0-terminated arrays of characters, and values are arbitrary objects. Although integers and floating point numbers are treated specially by the registry, you can store strings or binary objects of any type as pointers.

To start, you need to open a registry:

The number 45 in the example indicates the approximate number of objects that you expect to store in the registry. Internally the registry uses hash tables with collision chaining, so there is no absolute upper limit on the number of objects that the registry can contain, but if performance or memory usage are important, then you should choose a number accordingly. The registry can be resized later.

You can open as many registries as you like (if memory permits).

Objects are stored and retrieved through set and get functions. In the following examples you see how to store integers, floats, strings and arbitrary binary objects:

l = 42;
b->m = 12;
ei_reg_setpval(reg,"jox",b,sizeof(*b));    ]]>

If you attempt to store an object in the registry and there is an existing object with the same key, the new value will replace the old one. This is done regardless of whether the new object and the old one have the same type, so you can, for example, replace a string with an integer. If the existing value is a string or binary, it will be freed before the new value is assigned.

Stored values are retrieved from the registry as follows:

In all of the above examples, the object must exist and it must be of the right type for the specified operation. If you do not know the type of a given object, you can ask:

Buf will be initialized to contain object attributes.

Objects can be removed from the registry:

When you are finished with a registry, close it to remove all the objects and free the memory back to the system:

Backing Up the Registry to Mnesia

The contents of a registry can be backed up to Mnesia on a "nearby" Erlang node. You need to provide an open connection to the Erlang node (see ). Also, Mnesia 3.0 or later must be running on the Erlang node before the backup is initiated:

The example above will backup the contents of the registry to the specified Mnesia table . Once a registry has been backed up to Mnesia in this manner, additional backups will only affect objects that have been modified since the most recent backup, i.e. objects that have been created, changed or deleted. The backup operation is done as a single atomic transaction, so that the entire backup will be performed or none of it will.

In the same manner, a registry can be restored from a Mnesia table:

This will read the entire contents of into the specified registry. After the restore, all of the objects in the registry will be marked as unmodified, so a subsequent backup will only affect objects that you have modified since the restore.

Note that if you restore to a non-empty registry, objects in the table will overwrite objects in the registry with the same keys. Also, the entire contents of the registry is marked as unmodified after the restore, including any modified objects that were not overwritten by the restore operation. This may not be your intention.

Storing Strings and Binaries

When string or binary objects are stored in the registry it is important that a number of simple guidelines are followed.

Most importantly, the object must have been created with a single call to (or similar), so that it can later be removed by a single call to . Objects will be freed by the registry when it is closed, or when you assign a new value to an object that previously contained a string or binary.

You should also be aware that if you store binary objects that are context-dependent (e.g. containing pointers or open file descriptors), they will lose their meaning if they are backed up to a Mnesia table and subsequently restored in a different context.

When you retrieve a stored string or binary value from the registry, the registry maintains a pointer to the object and you are passed a copy of that pointer. You should never free an object retrieved in this manner because when the registry later attempts to free it, a runtime error will occur that will likely cause the C-node to crash.

You are free to modify the contents of an object retrieved this way. However when you do so, the registry will not be aware of the changes you make, possibly causing it to be missed the next time you make a Mnesia backup of the registry contents. This can be avoided if you mark the object as dirty after any such changes with , or pass appropriate flags to .