%% %% %CopyrightBegin% %% %% Copyright Ericsson AB 2005-2010. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in %% compliance with the License. You should have received a copy of the %% Erlang Public License along with this software. If not, it can be %% retrieved online at http://www.erlang.org/. %% %% Software distributed under the License is distributed on an "AS IS" %% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See %% the License for the specific language governing rights and limitations %% under the License. %% %% %CopyrightEnd% %% %% -module(ftp_format_SUITE). -author('ingela@erix.ericsson.se'). -include_lib("common_test/include/ct.hrl"). -include("test_server_line.hrl"). -include("ftp_internal.hrl"). %% Test server specific exports -export([all/0, suite/0,groups/0,init_per_suite/1, end_per_suite/1, init_per_group/2,end_per_group/2, init_per_testcase/2, end_per_testcase/2]). %% Test cases must be exported. -export([ ftp_150/1, ftp_200/1, ftp_220/1, ftp_226/1, ftp_257/1, ftp_331/1, ftp_425/1, ftp_other_status_codes/1, ftp_multiple_lines/1, ftp_multipel_ctrl_messages/1, format_error/1]). suite() -> [{suite_callbacks,[ts_install_scb]}]. all() -> [{group, ftp_response}, format_error]. groups() -> [{ftp_response, [], [ftp_150, ftp_200, ftp_220, ftp_226, ftp_257, ftp_331, ftp_425, ftp_other_status_codes, ftp_multiple_lines, ftp_multipel_ctrl_messages]}]. init_per_suite(Config) -> Config. end_per_suite(_Config) -> ok. init_per_group(_GroupName, Config) -> Config. end_per_group(_GroupName, Config) -> Config. init_per_testcase(_, Config) -> Dog = test_server:timetrap(?t:minutes(1)), NewConfig = lists:keydelete(watchdog, 1, Config), [{watchdog, Dog} | NewConfig]. end_per_testcase(_, Config) -> Dog = ?config(watchdog, Config), test_server:timetrap_cancel(Dog), ok. %%------------------------------------------------------------------------- %% Test cases starts here. %%------------------------------------------------------------------------- ftp_150(doc) -> ["Especially check that respons can be devided in a random place."]; ftp_150(suite) -> []; ftp_150(Config) when is_list(Config) -> FtpResponse = ["150 ASCII data conn", "ection for /bin/ls ", "(134.138.177", ".89,50434) (0 bytes).\r\n"], "150 ASCII data connection for /bin/ls " "(134.138.177.89,50434) (0 bytes).\r\n" = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse), {pos_prel, _} = ftp_response:interpret(Msg), ok. ftp_200(doc) -> ["Especially check that respons can be devided after the first status " "code character and in the end delimiter."]; ftp_200(suite) -> []; ftp_200(Config) when is_list(Config) -> FtpResponse = ["2", "00 PORT command successful.", [?CR], [?LF]], "200 PORT command successful.\r\n" = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse), {pos_compl, _} = ftp_response:interpret(Msg), ok. ftp_220(doc) -> ["Especially check that respons can be devided after the " "first with space "]; ftp_220(suite) -> []; ftp_220(Config) when is_list(Config) -> FtpResponse = ["220 ","fingon FTP server (SunOS 5.8) ready.\r\n"], "220 fingon FTP server (SunOS 5.8) ready.\r\n" = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse), {pos_compl, _} = ftp_response:interpret(Msg), ok. ftp_226(doc) -> ["Especially check that respons can be devided after second status code" " character and in the end delimiter."]; ftp_226(suite) -> []; ftp_226(Config) when is_list(Config) -> FtpResponse = ["22" "6 Transfer complete.\r", [?LF]], "226 Transfer complete.\r\n" = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse), {pos_compl, _} = ftp_response:interpret(Msg), ok. ftp_257(doc) -> ["Especially check that quoted chars do not cause a problem."]; ftp_257(suite) -> []; ftp_257(Config) when is_list(Config) -> FtpResponse = ["257 \"/\" is current directory.\r\n"], "257 \"/\" is current directory.\r\n" = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse), {pos_compl, _} = ftp_response:interpret(Msg), ok. ftp_331(doc) -> ["Especially check that respons can be devided after the third status " " status code character."]; ftp_331(suite) -> []; ftp_331(Config) when is_list(Config) -> %% Brake before white space after code FtpResponse = ["331"," Guest login ok, send ient as password.\r\n"], "331 Guest login ok, send ient as password.\r\n" = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse), {pos_interm, _} = ftp_response:interpret(Msg), ok. ftp_425(doc) -> ["Especially check a message that was received in only one part."]; ftp_425(suite) -> []; ftp_425(Config) when is_list(Config) -> FtpResponse = ["425 Can't build data connection: Connection refused.\r\n"], "425 Can't build data connection: Connection refused.\r\n" = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse), {trans_neg_compl, _} = ftp_response:interpret(Msg), ok. ftp_multiple_lines(doc) -> ["Especially check multiple lines devided in significant places"]; ftp_multiple_lines(suite) -> []; ftp_multiple_lines(Config) when is_list(Config) -> FtpResponse = ["21", "4","-The", " following commands are recognized:\r\n" " USER EPRT STRU MAIL* ALLO CWD", " STAT* XRMD \r\n" " PASS LPRT MODE MSND* " " REST* XCWD HELP PWD ", [?CRLF], " ACCT* EPSV RETR MSOM* RNFR LIST " " NOOP XPWD \r\n", " REIN* LPSV STOR MSAM* RNTO NLST " " MKD CDUP \r\n" " QUIT PASV APPE MRSQ* ABOR SITE* " " XMKD XCUP \r\n" " PORT TYPE MLFL* MRCP* DELE SYST " " RMD STOU \r\n" "214 (*'s => unimplemented)", [?CR], [?LF]], FtpResponse1 = ["214-", "The", " following commands are recognized:\r\n" " USER EPRT STRU MAIL* ALLO CWD", " STAT* XRMD \r\n" " PASS LPRT MODE MSND* " " REST* XCWD HELP PWD ", [?CRLF], " ACCT* EPSV RETR MSOM* RNFR LIST " " NOOP XPWD \r\n", " REIN* LPSV STOR MSAM* RNTO NLST " " MKD CDUP \r\n" " QUIT PASV APPE MRSQ* ABOR SITE* " " XMKD XCUP \r\n" " PORT TYPE MLFL* MRCP* DELE SYST " " RMD STOU \r\n" "2", "14 (*'s => unimplemented)", [?CR], [?LF]], FtpResponse2 = ["214-", "The", " following commands are recognized:\r\n" " USER EPRT STRU MAIL* ALLO CWD", " STAT* XRMD \r\n" " PASS LPRT MODE MSND* " " REST* XCWD HELP PWD ", [?CRLF], " ACCT* EPSV RETR MSOM* RNFR LIST " " NOOP XPWD \r\n", " REIN* LPSV STOR MSAM* RNTO NLST " " MKD CDUP \r\n" " QUIT PASV APPE MRSQ* ABOR SITE* " " XMKD XCUP \r\n" " PORT TYPE MLFL* MRCP* DELE SYST " " RMD STOU \r\n" "21", "4"," (*'s => unimplemented)", [?CR], [?LF]], MultiLineResultStr = "214-The following commands are recognized:\r\n" " USER EPRT STRU MAIL* ALLO CWD STAT* " "XRMD \r\n" " PASS LPRT MODE MSND* REST* XCWD HELP " "PWD \r\n" " ACCT* EPSV RETR MSOM* RNFR LIST NOOP " "XPWD \r\n" " REIN* LPSV STOR MSAM* RNTO NLST MKD " "CDUP \r\n" " QUIT PASV APPE MRSQ* ABOR SITE* XMKD " "XCUP \r\n" " PORT TYPE MLFL* MRCP* DELE SYST RMD " "STOU \r\n" "214 (*'s => unimplemented)\r\n", MultiLineResultStr = parse(ftp_response, parse_lines, [[], start], FtpResponse), {pos_compl, _} = ftp_response:interpret(MultiLineResultStr), MultiLineResultStr = parse(ftp_response, parse_lines, [[], start], FtpResponse1), MultiLineResultStr = parse(ftp_response, parse_lines, [[], start], FtpResponse2), ok. ftp_other_status_codes(doc) -> ["Check that other valid status codes, than the ones above, are handled" "by ftp_response:interpret/1. Note there are som ftp status codes" "that will not be received with the current ftp instruction support," "they are not included here."]; ftp_other_status_codes(suite) -> []; ftp_other_status_codes(Config) when is_list(Config) -> %% 1XX {pos_prel, _ } = ftp_response:interpret("120 Foobar\r\n"), %% 2XX {pos_compl, _ } = ftp_response:interpret("202 Foobar\r\n"), {pos_compl, _ } = ftp_response:interpret("221 Foobar\r\n"), {pos_compl, _ } = ftp_response:interpret("227 Foobar\r\n"), {pos_compl, _ } = ftp_response:interpret("230 Foobar\r\n"), {pos_compl, _ } = ftp_response:interpret("250 Foobar\r\n"), %% 3XX {pos_interm_acct, _ } = ftp_response:interpret("332 Foobar\r\n"), {pos_interm, _ } = ftp_response:interpret("350 Foobar\r\n"), %% 4XX {trans_neg_compl, _ } = ftp_response:interpret("421 Foobar\r\n"), {trans_neg_compl, _ } = ftp_response:interpret("426 Foobar\r\n"), {trans_neg_compl, _ } = ftp_response:interpret("450 Foobar\r\n"), {trans_neg_compl, _ } = ftp_response:interpret("451 Foobar\r\n"), {etnospc, _ } = ftp_response:interpret("452 Foobar\r\n"), %% 5XX {perm_neg_compl, _ } = ftp_response:interpret("500 Foobar\r\n"), {perm_neg_compl, _ } = ftp_response:interpret("501 Foobar\r\n"), {perm_neg_compl, _ } = ftp_response:interpret("503 Foobar\r\n"), {perm_neg_compl, _ } = ftp_response:interpret("504 Foobar\r\n"), {perm_neg_compl, _ } = ftp_response:interpret("530 Foobar\r\n"), {perm_neg_compl, _ } = ftp_response:interpret("532 Foobar\r\n"), {epath, _ } = ftp_response:interpret("550 Foobar\r\n"), {epnospc, _ } = ftp_response:interpret("552 Foobar\r\n"), {efnamena, _ } = ftp_response:interpret("553 Foobar\r\n"), ok. ftp_multipel_ctrl_messages(doc) -> ["The ftp server may send more than one control message as a reply," "check that they are handled one at the time."]; ftp_multipel_ctrl_messages(suite) -> []; ftp_multipel_ctrl_messages(Config) when is_list(Config) -> FtpResponse = ["200 PORT command successful.\r\n200 Foobar\r\n"], {"200 PORT command successful.\r\n" = Msg, NextMsg} = parse(ftp_response, parse_lines, [[], start], FtpResponse), {pos_compl, _} = ftp_response:interpret(Msg), NewMsg = parse(ftp_response, parse_lines, [[], start], NextMsg), {pos_compl, _} = ftp_response:interpret(NewMsg), ok. %%------------------------------------------------------------------------- format_error(doc) -> [""]; format_error(suite) -> []; format_error(Config) when is_list(Config) -> "Synchronisation error during chunk sending." = ftp:formaterror(echunk), "Session has been closed." = ftp:formaterror(eclosed), "Connection to remote server prematurely closed." = ftp:formaterror(econn), "File or directory already exists." = ftp:formaterror(eexists), "Host not found, FTP server not found, or connection rejected." = ftp:formaterror(ehost), "User not logged in." = ftp:formaterror(elogin), "Term is not a binary." = ftp:formaterror(enotbinary), "No such file or directory, already exists, or permission denied." = ftp:formaterror(epath), "No such type." = ftp:formaterror(etype), "User name or password not valid." = ftp:formaterror(euser), "Insufficient storage space in system." = ftp:formaterror(etnospc), "Exceeded storage allocation (for current directory or dataset)." = ftp:formaterror(epnospc), "File name not allowed." = ftp:formaterror(efnamena), "Unknown error: foobar" = ftp:formaterror({error, foobar}). %%-------------------------------------------------------------------- %%% Internal functions %%-------------------------------------------------------------------- parse(Module, Function, Args, Bin) when is_binary(Bin) -> parse(Module, Function, Args, [binary_to_list(Bin)]); parse(Module, Function, [AccLines, StatusCode], [Data | Rest]) -> case Module:Function(list_to_binary(Data), AccLines, StatusCode) of {ok, Result, <<>>} -> Result; {ok, Result, Next} -> {Result, Next}; {continue, {NewData, NewAccLines, NewStatusCode}} -> case Rest of [] -> test_server:fail({wrong_input, Data, Rest}); [_ | _] -> parse(Module, Function, [NewAccLines, NewStatusCode], [binary_to_list(NewData) ++ hd(Rest) | tl(Rest)]) end end.