%% %% %CopyrightBegin% %% %% Copyright Ericsson AB 2006-2016. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. %% You may obtain a copy of the License at %% %% http://www.apache.org/licenses/LICENSE-2.0 %% %% Unless required by applicable law or agreed to in writing, software %% distributed under the License is distributed on an "AS IS" BASIS, %% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. %% See the License for the specific language governing permissions and %% limitations under the License. %% %% %CopyrightEnd% %% -module(tftp_SUITE). -compile(export_all). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% Includes and defines %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -include("tftp_test_lib.hrl"). -define(START_DAEMON(PortX, OptionsX), fun(Port, Options) -> {ok, Pid} = ?VERIFY({ok, _Pid}, tftp:start([{port, Port} | Options])), if Port == 0 -> {ok, ActualOptions} = ?IGNORE(tftp:info(Pid)), {value, {port, ActualPort}} = lists:keysearch(port, 1, ActualOptions), {ActualPort, Pid}; true -> {Port, Pid} end end(PortX, OptionsX)). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% API %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% t() -> tftp_test_lib:t([{?MODULE, all}]). t(Cases) -> tftp_test_lib:t(Cases, default_config()). t(Cases, Config) -> tftp_test_lib:t(Cases, Config). default_config() -> []. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% Test server callbacks %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% init_per_testcase(Case, Config) -> tftp_test_lib:init_per_testcase(Case, Config). end_per_testcase(Case, Config) when is_list(Config) -> tftp_test_lib:end_per_testcase(Case, Config). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% Top test case %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% suite() -> [{ct_hooks,[ts_install_cth]}]. all() -> [simple, extra, reuse_connection, resend_client, resend_server, large_file]. groups() -> []. init_per_suite(Config) -> Config. end_per_suite(_Config) -> ok. init_per_group(_GroupName, Config) -> Config. end_per_group(_GroupName, Config) -> Config. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% Simple %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% simple(doc) -> ["Start the daemon and perform simple a read and write."]; simple(suite) -> []; simple(Config) when is_list(Config) -> ?VERIFY(ok, application:start(inets)), {Port, DaemonPid} = ?IGNORE(?START_DAEMON(0, [{debug, brief}])), %% Read fail RemoteFilename = "tftp_temporary_remote_test_file.txt", LocalFilename = "tftp_temporary_local_test_file.txt", Blob = list_to_binary(lists:duplicate(2000, $1)), %% Blob = <<"Some file contents\n">>, Size = size(Blob), ?IGNORE(file:delete(RemoteFilename)), ?VERIFY({error, {client_open, enoent, _}}, tftp:read_file(RemoteFilename, binary, [{port, Port}])), %% Write and read ?VERIFY({ok, Size}, tftp:write_file(RemoteFilename, Blob, [{port, Port}])), ?VERIFY({ok, Blob}, tftp:read_file(RemoteFilename, binary, [{port, Port}])), ?IGNORE(file:delete(LocalFilename)), ?VERIFY({ok, Size}, tftp:read_file(RemoteFilename, LocalFilename, [{port, Port}])), %% Cleanup unlink(DaemonPid), exit(DaemonPid, kill), ?VERIFY(ok, file:delete(LocalFilename)), ?VERIFY(ok, file:delete(RemoteFilename)), ?VERIFY(ok, application:stop(inets)), ok. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% Extra %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% extra(doc) -> ["Verify new stuff for IS 1.2."]; extra(suite) -> []; extra(Config) when is_list(Config) -> ?VERIFY({'EXIT', {badarg,{fake_key, fake_flag}}}, tftp:start([{port, 0}, {fake_key, fake_flag}])), {Port, DaemonPid} = ?IGNORE(?START_DAEMON(0, [{debug, brief}])), RemoteFilename = "tftp_extra_temporary_remote_test_file.txt", LocalFilename = "tftp_extra_temporary_local_test_file.txt", Blob = <<"Some file contents\n">>, Size = size(Blob), Host = "127.0.0.1", Peer = {inet, Host, Port}, Generic = [ {state, []}, {prepare, fun extra_prepare/6}, {open, fun extra_open/6}, {read, fun extra_read/1}, {write, fun extra_write/2}, {abort, fun extra_abort/3 } ], Options = [{host, Host}, {port, Port}, %%{ debug,all}, {callback, {".*", tftp_test_lib, Generic}}], ?VERIFY(ok, file:write_file(LocalFilename, Blob)), ?VERIFY({ok, [{count, Size}, Peer]}, tftp:write_file(RemoteFilename, LocalFilename, Options)), ?VERIFY(ok, file:delete(LocalFilename)), ?VERIFY({ok,[{bin, Blob}, Peer]}, tftp:read_file(RemoteFilename, LocalFilename, Options)), %% Cleanup unlink(DaemonPid), exit(DaemonPid, kill), ?VERIFY(ok, file:delete(LocalFilename)), ?VERIFY(ok, file:delete(RemoteFilename)), ok. -record(extra_state, {file, blksize, count, acc, peer}). %%------------------------------------------------------------------- %% Prepare %%------------------------------------------------------------------- extra_prepare(Peer, Access, LocalFilename, Mode, SuggestedOptions, []) -> %% Client side BlkSize = list_to_integer(tftp_test_lib:lookup_option("blksize", "512", SuggestedOptions)), State = #extra_state{blksize = BlkSize, peer = Peer}, extra_open(Peer, Access, LocalFilename, Mode, SuggestedOptions, State), {ok, SuggestedOptions, State}; extra_prepare(_Peer, _Access, _Bin, _Mode, _SuggestedOptions, _Initial) -> {error, {undef, "Illegal callback options."}}. %%------------------------------------------------------------------- %% Open %%------------------------------------------------------------------- extra_open(Peer, Access, LocalFilename, Mode, SuggestedOptions, []) -> %% Server side case extra_prepare(Peer, Access, LocalFilename, Mode, SuggestedOptions, []) of {ok, AcceptedOptions, []} -> BlkSize = list_to_integer(tftp_test_lib:lookup_option("blksize", "512", AcceptedOptions)), State = #extra_state{blksize = BlkSize, peer = Peer}, extra_open(Peer, Access, LocalFilename, Mode, AcceptedOptions, State); {error, {Code, Text}} -> {error, {Code, Text}} end; extra_open(_Peer, Access, LocalFilename, _Mode, NegotiatedOptions, #extra_state{} = State) -> {File, Acc} = case Access of read -> if is_binary(LocalFilename) -> {undefined, LocalFilename}; is_list(LocalFilename) -> {ok, Bin} = file:read_file(LocalFilename), {LocalFilename, Bin} end; write -> {LocalFilename, []} end, %% Both sides State2 = State#extra_state{file = File, acc = Acc, count = 0}, {ok, NegotiatedOptions, State2}. %%------------------------------------------------------------------- %% Read %%------------------------------------------------------------------- extra_read(#extra_state{acc = Bin} = State) when is_binary(Bin) -> BlkSize = State#extra_state.blksize, Count = State#extra_state.count + size(Bin), if size(Bin) >= BlkSize -> <> = Bin, State2 = State#extra_state{acc = Bin2, count = Count}, {more, Block, State2}; size(Bin) < BlkSize -> Res = [{count, Count}, State#extra_state.peer], {last, Bin, Res} end. %%------------------------------------------------------------------- %% Write %%------------------------------------------------------------------- extra_write(Bin, #extra_state{acc = List} = State) when is_binary(Bin), is_list(List) -> Size = size(Bin), BlkSize = State#extra_state.blksize, if Size == BlkSize -> {more, State#extra_state{acc = [Bin | List]}}; Size < BlkSize -> Bin2 = list_to_binary(lists:reverse([Bin | List])), Res = [{bin, Bin2}, State#extra_state.peer], file:write_file(State#extra_state.file, Bin2), {last, Res} end. %%------------------------------------------------------------------- %% Abort %%------------------------------------------------------------------- extra_abort(_Code, _Text, #extra_state{}) -> ok. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% Re-send client %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% resend_client(doc) -> ["Verify that the server behaves correctly when the client re-sends packets."]; resend_client(suite) -> []; resend_client(Config) when is_list(Config) -> Host = {127, 0, 0, 1}, {Port, DaemonPid} = ?IGNORE(?START_DAEMON(0, [{debug, all}])), ?VERIFY(ok, resend_read_client(Host, Port, 10)), ?VERIFY(ok, resend_read_client(Host, Port, 512)), ?VERIFY(ok, resend_read_client(Host, Port, 1025)), ?VERIFY(ok, resend_write_client(Host, Port, 10)), ?VERIFY(ok, resend_write_client(Host, Port, 512)), ?VERIFY(ok, resend_write_client(Host, Port, 1025)), %% Cleanup unlink(DaemonPid), exit(DaemonPid, kill), ok. resend_read_client(Host, Port, BlkSize) -> RemoteFilename = "tftp_resend_read_client.tmp", Block1 = lists:duplicate(BlkSize, $1), Block2 = lists:duplicate(BlkSize, $2), Block3 = lists:duplicate(BlkSize, $3), Block4 = lists:duplicate(BlkSize, $4), Block5 = lists:duplicate(BlkSize, $5), Blocks = [Block1, Block2, Block3, Block4, Block5], Blob = list_to_binary(Blocks), ?VERIFY(ok, file:write_file(RemoteFilename, Blob)), Timeout = timer:seconds(3), ?VERIFY(timeout, recv(0)), %% Open socket {ok, Socket} = ?VERIFY({ok, _}, gen_udp:open(0, [binary, {reuseaddr, true}, {active, true}])), ReadList = [0, 1, RemoteFilename, 0, "octet", 0], Data1Bin = list_to_binary([0, 3, 0, 1 | Block1]), NewPort = if BlkSize =:= 512 -> %% Send READ ReadBin = list_to_binary(ReadList), ?VERIFY(ok, gen_udp:send(Socket, Host, Port, ReadBin)), %% Sleep a while in order to provoke the server to re-send the packet timer:sleep(Timeout + timer:seconds(1)), %% Recv DATA #1 (the packet that the server think that we have lost) {udp, _, _, NewPort0, _} = ?VERIFY({udp, Socket, Host, _, Data1Bin}, recv(Timeout)), NewPort0; true -> %% Send READ BlkSizeList = integer_to_list(BlkSize), Options = ["blksize", 0, BlkSizeList, 0], ReadBin = list_to_binary([ReadList | Options]), ?VERIFY(ok, gen_udp:send(Socket, Host, Port, ReadBin)), %% Recv OACK OptionAckBin = list_to_binary([0, 6 | Options]), {udp, _, _, NewPort0, _} = ?VERIFY({udp, Socket, Host, _, OptionAckBin}, recv(Timeout)), %% Send ACK #0 Ack0Bin = <<0, 4, 0, 0>>, ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort0, Ack0Bin)), %% Send ACK #0 AGAIN (pretend that we timed out) timer:sleep(timer:seconds(1)), ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort0, Ack0Bin)), %% Recv DATA #1 (the packet that the server think that we have lost) ?VERIFY({udp, Socket, Host, NewPort0, Data1Bin}, recv(Timeout)), NewPort0 end, %% Recv DATA #1 AGAIN (the re-sent package) ?VERIFY({udp, Socket, Host, NewPort, Data1Bin}, recv(Timeout)), %% Send ACK #1 Ack1Bin = <<0, 4, 0, 1>>, ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack1Bin)), %% Recv DATA #2 Data2Bin = list_to_binary([0, 3, 0, 2 | Block2]), ?VERIFY({udp, Socket, Host, NewPort, Data2Bin}, recv(Timeout)), %% Send ACK #2 Ack2Bin = <<0, 4, 0, 2>>, ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack2Bin)), %% Recv DATA #3 Data3Bin = list_to_binary([0, 3, 0, 3 | Block3]), ?VERIFY({udp, Socket, Host, NewPort, Data3Bin}, recv(Timeout)), %% Send ACK #3 Ack3Bin = <<0, 4, 0, 3>>, ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack3Bin)), %% Send ACK #3 AGAIN (pretend that we timed out) timer:sleep(timer:seconds(1)), ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack3Bin)), %% Recv DATA #4 (the packet that the server think that we have lost) Data4Bin = list_to_binary([0, 3, 0, 4 | Block4]), ?VERIFY({udp, Socket, Host, NewPort, Data4Bin}, recv(Timeout)), %% Recv DATA #4 AGAIN (the re-sent package) ?VERIFY({udp, Socket, Host, NewPort, Data4Bin}, recv(Timeout)), %% Send ACK #2 which is out of range ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack2Bin)), %% Send ACK #4 Ack4Bin = <<0, 4, 0, 4>>, ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack4Bin)), %% Recv DATA #5 Data5Bin = list_to_binary([0, 3, 0, 5 | Block5]), ?VERIFY({udp, Socket, Host, NewPort, Data5Bin}, recv(Timeout)), %% Send ACK #5 Ack5Bin = <<0, 4, 0, 5>>, ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack5Bin)), %% Close socket ?VERIFY(ok, gen_udp:close(Socket)), ?VERIFY(timeout, recv(Timeout)), ?VERIFY(ok, file:delete(RemoteFilename)), ok. resend_write_client(Host, Port, BlkSize) -> RemoteFilename = "tftp_resend_write_client.tmp", Block1 = lists:duplicate(BlkSize, $1), Block2 = lists:duplicate(BlkSize, $2), Block3 = lists:duplicate(BlkSize, $3), Block4 = lists:duplicate(BlkSize, $4), Block5 = lists:duplicate(BlkSize, $5), Blocks = [Block1, Block2, Block3, Block4, Block5], Blob = list_to_binary(Blocks), ?IGNORE(file:delete(RemoteFilename)), ?VERIFY({error, enoent}, file:read_file(RemoteFilename)), Timeout = timer:seconds(3), ?VERIFY(timeout, recv(0)), %% Open socket {ok, Socket} = ?VERIFY({ok, _}, gen_udp:open(0, [binary, {reuseaddr, true}, {active, true}])), WriteList = [0, 2, RemoteFilename, 0, "octet", 0], NewPort = if BlkSize =:= 512 -> %% Send WRITE WriteBin = list_to_binary(WriteList), ?VERIFY(ok, gen_udp:send(Socket, Host, Port, WriteBin)), %% Sleep a while in order to provoke the server to re-send the packet timer:sleep(Timeout + timer:seconds(1)), %% Recv ACK #0 (the packet that the server think that we have lost) Ack0Bin = <<0, 4, 0, 0>>, ?VERIFY({udp, Socket, Host, _, Ack0Bin}, recv(Timeout)), %% Recv ACK #0 AGAIN (the re-sent package) {udp, _, _, NewPort0, _} = ?VERIFY({udp, Socket, Host, _, Ack0Bin}, recv(Timeout)), NewPort0; true -> %% Send WRITE BlkSizeList = integer_to_list(BlkSize), WriteBin = list_to_binary([WriteList, "blksize", 0, BlkSizeList, 0]), ?VERIFY(ok, gen_udp:send(Socket, Host, Port, WriteBin)), %% Sleep a while in order to provoke the server to re-send the packet timer:sleep(timer:seconds(1)), %% Recv OACK (the packet that the server think that we have lost) OptionAckBin = list_to_binary([0, 6, "blksize",0, BlkSizeList, 0]), ?VERIFY({udp, Socket, Host, _, OptionAckBin}, recv(Timeout)), %% Recv OACK AGAIN (the re-sent package) {udp, _, _, NewPort0, _} = ?VERIFY({udp, Socket, Host, _, OptionAckBin}, recv(Timeout)), NewPort0 end, %% Send DATA #1 Data1Bin = list_to_binary([0, 3, 0, 1 | Block1]), ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Data1Bin)), %% Recv ACK #1 Ack1Bin = <<0, 4, 0, 1>>, ?VERIFY({udp, Socket, Host, NewPort, Ack1Bin}, recv(Timeout)), %% Send DATA #2 Data2Bin = list_to_binary([0, 3, 0, 2 | Block2]), ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Data2Bin)), %% Recv ACK #2 Ack2Bin = <<0, 4, 0, 2>>, ?VERIFY({udp, Socket, Host, NewPort, Ack2Bin}, recv(Timeout)), %% Send DATA #3 Data3Bin = list_to_binary([0, 3, 0, 3 | Block3]), ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Data3Bin)), %% Recv ACK #3 Ack3Bin = <<0, 4, 0, 3>>, ?VERIFY({udp, Socket, Host, NewPort, Ack3Bin}, recv(Timeout)), %% Send DATA #3 AGAIN (pretend that we timed out) timer:sleep(timer:seconds(1)), ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Data3Bin)), %% Recv ACK #3 AGAIN (the packet that the server think that we have lost) ?VERIFY({udp, Socket, Host, NewPort, Ack3Bin}, recv(Timeout)), %% Send DATA #2 which is out of range ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Data2Bin)), %% Send DATA #4 Data4Bin = list_to_binary([0, 3, 0, 4 | Block4]), ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Data4Bin)), %% Recv ACK #4 Ack4Bin = <<0, 4, 0, 4>>, ?VERIFY({udp, Socket, Host, NewPort, Ack4Bin}, recv(Timeout)), %% Send DATA #5 Data5Bin = list_to_binary([0, 3, 0, 5 | Block5]), ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Data5Bin)), %% Recv ACK #5 Ack5Bin = <<0, 4, 0, 5>>, ?VERIFY({udp, Socket, Host, NewPort, Ack5Bin}, recv(Timeout)), %% Close socket ?VERIFY(ok, gen_udp:close(Socket)), ?VERIFY(timeout, recv(Timeout)), ?VERIFY({ok, Blob}, file:read_file(RemoteFilename)), ?VERIFY(ok, file:delete(RemoteFilename)), ok. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% Re-send server %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% resend_server(doc) -> ["Verify that the server behaves correctly when the server re-sends packets."]; resend_server(suite) -> []; resend_server(Config) when is_list(Config) -> Host = {127, 0, 0, 1}, ?VERIFY(ok, resend_read_server(Host, 10)), ?VERIFY(ok, resend_read_server(Host, 512)), ?VERIFY(ok, resend_read_server(Host, 1025)), ?VERIFY(ok, resend_write_server(Host, 10)), ?VERIFY(ok, resend_write_server(Host, 512)), ?VERIFY(ok, resend_write_server(Host, 1025)), ok. resend_read_server(Host, BlkSize) -> RemoteFilename = "tftp_resend_read_server.tmp", Block1 = lists:duplicate(BlkSize, $1), Block2 = lists:duplicate(BlkSize, $2), Block3 = lists:duplicate(BlkSize, $3), Block4 = lists:duplicate(BlkSize, $4), Block5 = lists:duplicate(BlkSize, $5), Block6 = [], Blocks = [Block1, Block2, Block3, Block4, Block5, Block6], Blob = list_to_binary(Blocks), Timeout = timer:seconds(3), ?VERIFY(timeout, recv(0)), %% Open daemon socket {ok, DaemonSocket} = ?VERIFY({ok, _}, gen_udp:open(0, [binary, {reuseaddr, true}, {active, true}])), {ok, DaemonPort} = ?IGNORE(inet:port(DaemonSocket)), %% Open server socket {ok, ServerSocket} = ?VERIFY({ok, _}, gen_udp:open(0, [binary, {reuseaddr, true}, {active, true}])), ?IGNORE(inet:port(ServerSocket)), %% Prepare client process ReplyTo = self(), ClientFun = fun(Extra) -> Options = [{port, DaemonPort}, {debug, brief}] ++ Extra, Res = ?VERIFY({ok, Blob}, tftp:read_file(RemoteFilename, binary, Options)), ReplyTo ! {self(), {tftp_client_reply, Res}}, exit(normal) end, ReadList = [0, 1, RemoteFilename, 0, "octet", 0], Data1Bin = list_to_binary([0, 3, 0, 1 | Block1]), Ack1Bin = <<0, 4, 0, 1>>, {ClientPort, ClientPid} = if BlkSize =:= 512 -> %% Start client process ClientPid0 = spawn_link(fun() -> ClientFun([]) end), %% Recv READ ReadBin = list_to_binary(ReadList), {udp, _, _, ClientPort0, _} = ?VERIFY({udp, DaemonSocket, Host, _, ReadBin}, recv(Timeout)), %% Send DATA #1 ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort0, Data1Bin)), %% Sleep a while in order to provoke the client to re-send the packet timer:sleep(Timeout + timer:seconds(1)), %% Recv ACK #1 (the packet that the server think that we have lost) ?VERIFY({udp, ServerSocket, Host, ClientPort0, Ack1Bin}, recv(Timeout)), %% Recv ACK #1 AGAIN (the re-sent package) ?VERIFY({udp, ServerSocket, Host, _, Ack1Bin}, recv(Timeout)), {ClientPort0, ClientPid0}; true -> %% Start client process BlkSizeList = integer_to_list(BlkSize), ClientPid0 = spawn_link(fun() -> ClientFun([{"blksize", BlkSizeList}]) end), %% Recv READ Options = ["blksize", 0, BlkSizeList, 0], ReadBin = list_to_binary([ReadList | Options]), {udp, _, _, ClientPort0, _} = ?VERIFY({udp, DaemonSocket, Host, _, ReadBin}, recv(Timeout)), %% Send OACK BlkSizeList = integer_to_list(BlkSize), OptionAckBin = list_to_binary([0, 6, "blksize",0, BlkSizeList, 0]), ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort0, OptionAckBin)), %% Sleep a while in order to provoke the client to re-send the packet timer:sleep(Timeout + timer:seconds(1)), %% Recv ACK #0 (the packet that the server think that we have lost) Ack0Bin = <<0, 4, 0, 0>>, ?VERIFY({udp, ServerSocket, Host, ClientPort0, Ack0Bin}, recv(Timeout)), %% Recv ACK #0 AGAIN (the re-sent package) ?VERIFY({udp, ServerSocket, Host, ClientPort0, Ack0Bin}, recv(Timeout)), %% Send DATA #1 ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort0, Data1Bin)), %% Recv ACK #1 ?VERIFY({udp, ServerSocket, Host, _, Ack1Bin}, recv(Timeout)), {ClientPort0, ClientPid0} end, %% Send DATA #2 Data2Bin = list_to_binary([0, 3, 0, 2 | Block2]), ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Data2Bin)), %% Recv ACK #2 Ack2Bin = <<0, 4, 0, 2>>, ?VERIFY({udp, ServerSocket, Host, ClientPort, Ack2Bin}, recv(Timeout)), %% Send DATA #3 Data3Bin = list_to_binary([0, 3, 0, 3 | Block3]), ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Data3Bin)), %% Recv ACK #3 Ack3Bin = <<0, 4, 0, 3>>, ?VERIFY({udp, ServerSocket, Host, ClientPort, Ack3Bin}, recv(Timeout)), %% Send DATA #3 AGAIN (pretend that we timed out) timer:sleep(timer:seconds(1)), ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Data3Bin)), %% Recv ACK #3 AGAIN (the packet that the server think that we have lost) ?VERIFY({udp, ServerSocket, Host, ClientPort, Ack3Bin}, recv(Timeout)), %% Send DATA #4 Data4Bin = list_to_binary([0, 3, 0, 4 | Block4]), ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Data4Bin)), %% Recv ACK #4 Ack4Bin = <<0, 4, 0, 4>>, ?VERIFY({udp, ServerSocket, Host, ClientPort, Ack4Bin}, recv(Timeout)), %% Send DATA #3 which is out of range ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Data3Bin)), %% Send DATA #5 Data5Bin = list_to_binary([0, 3, 0, 5 | Block5]), ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Data5Bin)), %% Recv ACK #5 Ack5Bin = <<0, 4, 0, 5>>, ?VERIFY({udp, ServerSocket, Host, ClientPort, Ack5Bin}, recv(Timeout)), %% Send DATA #6 Data6Bin = list_to_binary([0, 3, 0, 6 | Block6]), ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Data6Bin)), %% Close daemon and server sockets ?VERIFY(ok, gen_udp:close(ServerSocket)), ?VERIFY(ok, gen_udp:close(DaemonSocket)), ?VERIFY({ClientPid, {tftp_client_reply, {ok, Blob}}}, recv(Timeout)), ?VERIFY(timeout, recv(Timeout)), ok. resend_write_server(Host, BlkSize) -> RemoteFilename = "tftp_resend_write_server.tmp", Block1 = lists:duplicate(BlkSize, $1), Block2 = lists:duplicate(BlkSize, $2), Block3 = lists:duplicate(BlkSize, $3), Block4 = lists:duplicate(BlkSize, $4), Block5 = lists:duplicate(BlkSize, $5), Block6 = [], Blocks = [Block1, Block2, Block3, Block4, Block5, Block6], Blob = list_to_binary(Blocks), Size = size(Blob), Timeout = timer:seconds(3), ?VERIFY(timeout, recv(0)), %% Open daemon socket {ok, DaemonSocket} = ?VERIFY({ok, _}, gen_udp:open(0, [binary, {reuseaddr, true}, {active, true}])), {ok, DaemonPort} = ?IGNORE(inet:port(DaemonSocket)), %% Open server socket {ok, ServerSocket} = ?VERIFY({ok, _}, gen_udp:open(0, [binary, {reuseaddr, true}, {active, true}])), ?IGNORE(inet:port(ServerSocket)), %% Prepare client process ReplyTo = self(), ClientFun = fun(Extra) -> Options = [{port, DaemonPort}, {debug, brief}] ++ Extra, Res = ?VERIFY({ok, Size}, tftp:write_file(RemoteFilename, Blob, Options)), ReplyTo ! {self(), {tftp_client_reply, Res}}, exit(normal) end, WriteList = [0, 2, RemoteFilename, 0, "octet", 0], Data1Bin = list_to_binary([0, 3, 0, 1 | Block1]), {ClientPort, ClientPid} = if BlkSize =:= 512 -> %% Start client process ClientPid0 = spawn_link(fun() -> ClientFun([]) end), %% Recv WRITE WriteBin = list_to_binary(WriteList), io:format("WriteBin ~p\n", [WriteBin]), {udp, _, _, ClientPort0, _} = ?VERIFY({udp, DaemonSocket, Host, _, WriteBin}, recv(Timeout)), %% Send ACK #1 Ack0Bin = <<0, 4, 0, 0>>, ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort0, Ack0Bin)), %% Sleep a while in order to provoke the client to re-send the packet timer:sleep(Timeout + timer:seconds(1)), %% Recv DATA #1 (the packet that the server think that we have lost) ?VERIFY({udp, ServerSocket, Host, ClientPort0, Data1Bin}, recv(Timeout)), %% Recv DATA #1 AGAIN (the re-sent package) ?VERIFY({udp, ServerSocket, Host, _, Data1Bin}, recv(Timeout)), {ClientPort0, ClientPid0}; true -> %% Start client process BlkSizeList = integer_to_list(BlkSize), ClientPid0 = spawn_link(fun() -> ClientFun([{"blksize", BlkSizeList}]) end), %% Recv WRITE Options = ["blksize", 0, BlkSizeList, 0], WriteBin = list_to_binary([WriteList | Options]), {udp, _, _, ClientPort0, _} = ?VERIFY({udp, DaemonSocket, Host, _, WriteBin}, recv(Timeout)), %% Send OACK BlkSizeList = integer_to_list(BlkSize), OptionAckBin = list_to_binary([0, 6, "blksize",0, BlkSizeList, 0]), ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort0, OptionAckBin)), %% Sleep a while in order to provoke the client to re-send the packet timer:sleep(Timeout + timer:seconds(1)), %% Recv DATA #1 (the packet that the server think that we have lost) ?VERIFY({udp, ServerSocket, Host, ClientPort0, Data1Bin}, recv(Timeout)), %% Recv DATA #1 AGAIN (the re-sent package) ?VERIFY({udp, ServerSocket, Host, ClientPort0, Data1Bin}, recv(Timeout)), {ClientPort0, ClientPid0} end, %% Send ACK #1 Ack1Bin = <<0, 4, 0, 1>>, ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Ack1Bin)), %% Recv DATA #2 Data2Bin = list_to_binary([0, 3, 0, 2 | Block2]), ?VERIFY({udp, ServerSocket, Host, ClientPort, Data2Bin}, recv(Timeout)), %% Send ACK #2 Ack2Bin = <<0, 4, 0, 2>>, ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Ack2Bin)), %% Recv DATA #3 Data3Bin = list_to_binary([0, 3, 0, 3 | Block3]), ?VERIFY({udp, ServerSocket, Host, ClientPort, Data3Bin}, recv(Timeout)), %% Send ACK #3 Ack3Bin = <<0, 4, 0, 3>>, ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Ack3Bin)), %% Send ACK #3 AGAIN (pretend that we timed out) timer:sleep(timer:seconds(1)), ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Ack3Bin)), %% Recv DATA #4 (the packet that the server think that we have lost) Data4Bin = list_to_binary([0, 3, 0, 4 | Block4]), ?VERIFY({udp, ServerSocket, Host, ClientPort, Data4Bin}, recv(Timeout)), %% Recv DATA #4 AGAIN (the re-sent package) ?VERIFY({udp, ServerSocket, Host, ClientPort, Data4Bin}, recv(Timeout)), %% Send ACK #4 Ack4Bin = <<0, 4, 0, 4>>, ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Ack4Bin)), %% Recv DATA #5 Data5Bin = list_to_binary([0, 3, 0, 5 | Block5]), ?VERIFY({udp, ServerSocket, Host, ClientPort, Data5Bin}, recv(Timeout)), %% Send ACK #3 which is out of range ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Ack3Bin)), %% Send ACK #5 Ack5Bin = <<0, 4, 0, 5>>, ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Ack5Bin)), %% Recv DATA #6 Data6Bin = list_to_binary([0, 3, 0, 6 | Block6]), ?VERIFY({udp, ServerSocket, Host, ClientPort, Data6Bin}, recv(Timeout)), %% Send ACK #6 Ack6Bin = <<0, 4, 0, 6>>, ?VERIFY(ok, gen_udp:send(ServerSocket, Host, ClientPort, Ack6Bin)), %% Close daemon and server sockets ?VERIFY(ok, gen_udp:close(ServerSocket)), ?VERIFY(ok, gen_udp:close(DaemonSocket)), ?VERIFY({ClientPid, {tftp_client_reply, {ok, Size}}}, recv(Timeout)), ?VERIFY(timeout, recv(Timeout)), ok. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% reuse_connection(doc) -> ["Verify that the server can reuse an ongiong connection when same client resends request."]; reuse_connection(suite) -> []; reuse_connection(Config) when is_list(Config) -> Host = {127, 0, 0, 1}, {Port, DaemonPid} = ?IGNORE(?START_DAEMON(0, [{debug, all}])), RemoteFilename = "reuse_connection.tmp", BlkSize = 512, Block1 = lists:duplicate(BlkSize, $1), Block2 = lists:duplicate(BlkSize div 2, $2), Blocks = [Block1, Block2], Blob = list_to_binary(Blocks), ?VERIFY(ok, file:write_file(RemoteFilename, Blob)), Seconds = 3, Timeout = timer:seconds(Seconds), ?VERIFY(timeout, recv(0)), %% Open socket {ok, Socket} = ?VERIFY({ok, _}, gen_udp:open(0, [binary, {reuseaddr, true}, {active, true}])), ReadList = [0, 1, RemoteFilename, 0, "octet", 0], Data1Bin = list_to_binary([0, 3, 0, 1 | Block1]), %% Send READ TimeoutList = integer_to_list(Seconds), Options = ["timeout", 0, TimeoutList, 0], ReadBin = list_to_binary([ReadList | Options]), ?VERIFY(ok, gen_udp:send(Socket, Host, Port, ReadBin)), %% Send yet another READ for same file ?VERIFY(ok, gen_udp:send(Socket, Host, Port, ReadBin)), %% Recv OACK OptionAckBin = list_to_binary([0, 6 | Options]), {udp, _, _, NewPort, _} = ?VERIFY({udp, Socket, Host, _, OptionAckBin}, recv(Timeout)), %% Send ACK #0 Ack0Bin = <<0, 4, 0, 0>>, ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack0Bin)), %% Recv DATA #1 ?VERIFY({udp, Socket, Host, NewPort, Data1Bin}, recv(Timeout)), %% Send ACK #1 Ack1Bin = <<0, 4, 0, 1>>, ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack1Bin)), %% Recv DATA #2 Data2Bin = list_to_binary([0, 3, 0, 2 | Block2]), ?VERIFY({udp, Socket, Host, NewPort, Data2Bin}, recv(Timeout)), %% Send ACK #2 Ack2Bin = <<0, 4, 0, 2>>, ?VERIFY(ok, gen_udp:send(Socket, Host, NewPort, Ack2Bin)), %% Close socket ?VERIFY(ok, gen_udp:close(Socket)), ?VERIFY(timeout, recv(Timeout)), ?VERIFY(ok, file:delete(RemoteFilename)), %% Cleanup unlink(DaemonPid), exit(DaemonPid, kill), ok. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% Large file: transfer > 65535 blocks %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% large_file(doc) -> ["Start the daemon and test transfer of files greater than 32M."]; large_file(suite) -> []; large_file(Config) when is_list(Config) -> ?VERIFY(ok, application:start(inets)), {Port, DaemonPid} = ?IGNORE(?START_DAEMON(0, [{debug, brief}])), %% Read fail RemoteFilename = "tftp_temporary_large_file_remote_test_file.txt", LocalFilename = "tftp_temporary_large_file_local_test_file.txt", {ok, FH} = file:open(LocalFilename, [write,exclusive]), {ok, Size} = file:position(FH, {eof, 2*512*65535}), ok = file:truncate(FH), ?IGNORE(file:close(FH)), %% Write and read ?VERIFY({ok, Size}, tftp:write_file(RemoteFilename, LocalFilename, [{port, Port}])), ?IGNORE(file:delete(LocalFilename)), ?VERIFY({ok, Size}, tftp:read_file(RemoteFilename, LocalFilename, [{port, Port}])), %% Cleanup unlink(DaemonPid), exit(DaemonPid, kill), ?VERIFY(ok, file:delete(LocalFilename)), ?VERIFY(ok, file:delete(RemoteFilename)), ?VERIFY(ok, application:stop(inets)), ok. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% Goodies %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% recv(Timeout) -> receive Msg -> Msg after Timeout -> timeout end.