19962016 Ericsson AB. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. error_logger
error_logger Erlang error logger.

The Erlang error logger is an event manager (see OTP Design Principles and stdlib:gen_event(3)), registered as error_logger. Errors, warnings, and info events are sent to the error logger from the Erlang runtime system and the different Erlang/OTP applications. The events are, by default, logged to the terminal. Notice that an event from a process P is logged at the node of the group leader of P. This means that log output is directed to the node from which a process was created, which not necessarily is the same node as where it is executing.

Initially, error_logger has only a primitive event handler, which buffers and prints the raw event messages. During system startup, the Kernel application replaces this with a standard event handler, by default one that writes nicely formatted output to the terminal. Kernel can also be configured so that events are logged to a file instead, or not logged at all, see kernel(6).

Also the SASL application, if started, adds its own event handler, which by default writes supervisor, crash, and progress reports to the terminal. See sasl(6).

It is recommended that user-defined applications report errors through the error logger to get uniform reports. User-defined event handlers can be added to handle application-specific events, see add_report_handler/1,2. Also, a useful event handler is provided in STDLIB for multi-file logging of events, see stdlib:log_mf_h(3).

Warning events were introduced in Erlang/OTP R9C and are enabled by default as from Erlang/OTP 18.0. To retain backwards compatibility with existing user-defined event handlers, the warning events can be tagged as errors or info using command-line flag ]]>, thus showing up as ERROR REPORT or INFO REPORT in the logs.

 Add an event handler to the error logger.

Adds a new event handler to the error logger. The event handler must be implemented as a gen_event callback module, see stdlib:gen_event(3).

Handler is typically the name of the callback module and Args is an optional term (defaults to []) passed to the initialization callback function Handler:init/1. The function returns ok if successful.

The event handler must be able to handle the events in this module, see section Events.

 Delete an event handler from the error logger.

Deletes an event handler from the error logger by calling gen_event:delete_handler(error_logger, Handler, []), see stdlib:gen_event(3).

 Send a standard error event to the error logger.

Sends a standard error event to the error logger. The Format and Data arguments are the same as the arguments of io:format/2 in STDLIB. The event is handled by the standard event handler.

Example:

1> error_logger:error_msg("An error occurred in ~p~n", [a_module]).

=ERROR REPORT==== 11-Aug-2005::14:03:19 ===
An error occurred in a_module
ok

If called with bad arguments, this function can crash the standard event handler, meaning no further events are logged. When in doubt, use error_report/1 instead.

 Send a standard error report event to the error logger.

Sends a standard error report event to the error logger. The event is handled by the standard event handler.

Example:

2> error_logger:error_report([{tag1,data1},a_term,{tag2,data}]).

=ERROR REPORT==== 11-Aug-2005::13:45:41 ===
    tag1: data1
    a_term
    tag2: data
ok
3> error_logger:error_report("Serious error in my module").

=ERROR REPORT==== 11-Aug-2005::13:45:49 ===
Serious error in my module
ok
 Send a user-defined error report event to the error logger.

Sends a user-defined error report event to the error logger. An event handler to handle the event is supposed to have been added. The event is ignored by the standard event handler.

It is recommended that Report follows the same structure as for error_report/1.

 Send a standard information event to the error logger.

Sends a standard information event to the error logger. The Format and Data arguments are the same as the arguments of io:format/2 in STDLIB. The event is handled by the standard event handler.

Example:

1> error_logger:info_msg("Something happened in ~p~n", [a_module]).

=INFO REPORT==== 11-Aug-2005::14:06:15 ===
Something happened in a_module
ok

If called with bad arguments, this function can crash the standard event handler, meaning no further events are logged. When in doubt, use info_report/1 instead.

 Send a standard information report event to the error logger.

Sends a standard information report event to the error logger. The event is handled by the standard event handler.

Example:

2> error_logger:info_report([{tag1,data1},a_term,{tag2,data}]).

=INFO REPORT==== 11-Aug-2005::13:55:09 ===
    tag1: data1
    a_term
    tag2: data
ok
3> error_logger:info_report("Something strange happened").

=INFO REPORT==== 11-Aug-2005::13:55:36 ===
Something strange happened
ok
 Send a user-defined information report event to the error logger.

Sends a user-defined information report event to the error logger. An event handler to handle the event is supposed to have been added. The event is ignored by the standard event handler.

It is recommended that Report follows the same structure as for info_report/1.

 Enable or disable error printouts to a file.

Enables or disables printout of standard events to a file.

This is done by adding or deleting the standard event handler for output to file. Thus, calling this function overrides the value of the Kernel error_logger configuration parameter.

Enabling file logging can be used together with calling tty(false), to have a silent system where all standard events are logged to a file only. Only one log file can be active at a time.

Request is one of the following:

{open, Filename}

Opens log file Filename. Returns ok if successful, or {error, allready_have_logfile} if logging to file is already enabled, or an error tuple if another error occurred (for example, if Filename cannot be opened).

 close

Closes the current log file. Returns ok, or {error, module_not_found}.

 filename

Returns the name of the log file Filename, or {error, no_log_file} if logging to file is not enabled.

 Enable or disable printouts to the terminal.

Enables (Flag == true) or disables (Flag == false) printout of standard events to the terminal.

This is done by adding or deleting the standard event handler for output to the terminal. Thus, calling this function overrides the value of the Kernel error_logger configuration parameter.

 Return the current mapping for warning events.

Returns the current mapping for warning events. Events sent using warning_msg/1,2 or warning_report/1,2 are tagged as errors, warnings (default), or info, depending on the value of command-line flag +W.

Example:

os$ erl
Erlang (BEAM) emulator version 5.4.8 [hipe] [threads:0] [kernel-poll]

Eshell V5.4.8  (abort with ^G)
1> error_logger:warning_map().
warning
2> error_logger:warning_msg("Warnings tagged as: ~p~n", [warning]).

=WARNING REPORT==== 11-Aug-2005::15:31:55 ===
Warnings tagged as: warning
ok
3>
User switch command
 --> q
os$ erl +W e
Erlang (BEAM) emulator version 5.4.8 [hipe] [threads:0] [kernel-poll]

Eshell V5.4.8  (abort with ^G)
1> error_logger:warning_map().
error
2> error_logger:warning_msg("Warnings tagged as: ~p~n", [error]).

=ERROR REPORT==== 11-Aug-2005::15:31:23 ===
Warnings tagged as: error
ok
 Send a standard warning event to the error logger.

Sends a standard warning event to the error logger. The Format and Data arguments are the same as the arguments of io:format/2 in STDLIB. The event is handled by the standard event handler. It is tagged as an error, warning, or info, see warning_map/0.

If called with bad arguments, this function can crash the standard event handler, meaning no further events are logged. When in doubt, use warning_report/1 instead.

 Send a standard warning report event to the error logger.

Sends a standard warning report event to the error logger. The event is handled by the standard event handler. It is tagged as an error, warning, or info, see warning_map/0.

 Send a user-defined warning report event to the error logger.

Sends a user-defined warning report event to the error logger. An event handler to handle the event is supposed to have been added. The event is ignored by the standard event handler. It is tagged as an error, warning, or info, depending on the value of warning_map/0.
Events

All event handlers added to the error logger must handle the following events. Gleader is the group leader pid of the process that sent the event, and Pid is the process that sent the event.

{error, Gleader, {Pid, Format, Data}}

Generated when error_msg/1,2 or format is called.

 {error_report, Gleader, {Pid, std_error, Report}}

Generated when error_report/1 is called.

 {error_report, Gleader, {Pid, Type, Report}}

Generated when error_report/2 is called.

 {warning_msg, Gleader, {Pid, Format, Data}}

Generated when warning_msg/1,2 is called if warnings are set to be tagged as warnings.

 {warning_report, Gleader, {Pid, std_warning, Report}}

Generated when warning_report/1 is called if warnings are set to be tagged as warnings.

 {warning_report, Gleader, {Pid, Type, Report}}

Generated when warning_report/2 is called if warnings are set to be tagged as warnings.

 {info_msg, Gleader, {Pid, Format, Data}}

Generated when info_msg/1,2 is called.

 {info_report, Gleader, {Pid, std_info, Report}}

Generated when info_report/1 is called.

 {info_report, Gleader, {Pid, Type, Report}}

Generated when info_report/2 is called.

Notice that some system-internal events can also be received. Therefore a catch-all clause last in the definition of the event handler callback function Module:handle_event/2 is necessary. This also applies for Module:handle_info/2, as the event handler must also take care of some system-internal messages.

See Also

stdlib:gen_event(3), stdlib:log_mf_h(3) kernel(6) sasl(6)