%% %% %CopyrightBegin% %% %% Copyright Ericsson AB 2011-2016. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. %% You may obtain a copy of the License at %% %% http://www.apache.org/licenses/LICENSE-2.0 %% %% Unless required by applicable law or agreed to in writing, software %% distributed under the License is distributed on an "AS IS" BASIS, %% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. %% See the License for the specific language governing permissions and %% limitations under the License. %% %% %CopyrightEnd% %% -module(installer). -include("test_lib.hrl"). %%-compile(export_all). -export([install_1/2]). -export([install_2/1]). -export([install_3/2]). -export([install_6a/1]). -export([install_4/1]). -export([install_5/1]). -export([install_5a/1]). -export([install_6/1]). -export([install_7/1]). -export([install_7a/1]). -export([install_8/1]). -export([install_8a/1]). -export([install_9/1]). -export([install_10/1]). -export([install_11/1]). -export([install_12/1]). -export([install_13/1]). -export([install_14/1]). -export([upgrade_restart_1/2]). -export([upgrade_restart_1a/1]). -export([upgrade_restart_2/1]). -export([upgrade_restart_2a/1]). -export([upgrade_restart_2b/1]). -export([upgrade_restart_3/1]). -export([client1_1/4]). -export([client2/3]). -export([stop/1]). -export([unpack_p1h/2]). -export([permanent_p1h/1]). -export([reg_proc/1]). -export([registered_loop/1]). -define(print(List), io:format(user,"(~w:~w) ~tp~n",[?MODULE,?LINE,List]), {rh_print, TestNode} ! {print, {?MODULE, ?LINE}, List}). -define(print_line(Line,List), io:format(user,"(~w:~w) ~tp~n",[?MODULE,Line,List]), {rh_print, TestNode} ! {print, {?MODULE, Line}, List}). -define(fail(Term), exit({?MODULE, ?LINE, Term})). -define(fail_line(Line,Term), exit({?MODULE, Line, Term})). -define(check_release_states(States), check_release_states(TestNode,node(),States,?LINE)). -define(check_release_states_client(Node,States), check_release_states(TestNode,Node,States,?LINE)). -define(check_release_lib(Vsn,Apps), check_release_lib(TestNode,node(),Vsn,Apps,?LINE)). -define(check_release_lib_client(Node,Vsn,Apps), check_release_lib(TestNode,Node,Vsn,Apps,?LINE)). -define(check_running_app(App,Vsn), check_running_app(TestNode,node(),App,Vsn,?LINE)). -define(check_running_app_client(Node,App,Vsn), check_running_app(TestNode,Node,App,Vsn,?LINE)). -define(check_disallowed_calls,check_disallowed_calls(TestNode,?LINE)). install_1(TestNode,PrivDir) -> ?print([TestNode]), ?print(["install_1 start"]), ?check_release_states([permanent]), % Unpack and install P1H {ok, "P1H"} = unpack_release(PrivDir,"rel1"), ?check_release_states([permanent,unpacked]), ?check_release_lib("P1H",["a-1.0"]), {ok,"P1G",[new_appl]} = release_handler:install_release("P1H"), ?check_release_states([permanent,current]), ?check_running_app(a,"1.0"), X = a:a(), ?print(["X", X]), {key2, val2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), ?print(["install_1 end OK"]), ok. % release_handler_SUITE will reboot this node now! install_2(TestNode) -> ?print(["install_2 start"]), % Check that P1H is still unpacked, install it and make_permanent ?check_release_states([permanent,unpacked]), {ok,"P1G",[new_appl]} = release_handler:install_release("P1H"), ?print(["install_2 install_release ok"]), ?check_release_states([permanent,current]), ?check_running_app(a,"1.0"), ok = release_handler:make_permanent("P1H"), ?print(["install_2 make permanent P1H ok"]), ?check_release_states([old,permanent]), ?check_running_app(a,"1.0"), ok. % release_handler_SUITE will reboot this node now! install_3(TestNode,PrivDir) -> ?print(["install_3 start"]), % Check that P1H is permanent ?check_release_states([old,permanent]), ?check_running_app(a,"1.0"), X = a:a(), {key2, val2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), % Unpack and install P1I {ok, "P1I"} = unpack_release(PrivDir,"rel2"), ?check_release_states([old,permanent,unpacked]), ?check_release_lib("P1I",["a-1.1"]), {ok,"P1H",[{extra, gott}]} = release_handler:check_install_release("P1I"), ?print(["install_3 check_install_release P1I ok"]), {error,_} = release_handler:check_install_release("P1J"), ?print(["install_3 check_install_release P1J fails - ok"]), {ok,"P1H",[{extra, gott}]} = release_handler:install_release("P1I"), ?check_release_states([old,permanent,current]), ?check_running_app(a,"1.1"), X2 = a:a(), {key2, newval2} = lists:keyfind(key2, 1, X2), {key1, val1} = lists:keyfind(key1, 1, X2), {ok, bval} = a:b(), ?print(["install_3 env ok"]), % Unpack P2A {ok, "P2A"} = unpack_release(PrivDir,"rel3"), ?check_release_states([old,permanent,current,unpacked]), ?check_release_lib("P2A",["a-1.1"]), {ok, "P1I", [new_emu]} = release_handler:check_install_release("P2A"), ?print(["install_3 check_install_release P2A ok"]), ok. % release_handler_SUITE will reboot this node now! install_4(TestNode) -> ?print(["install_4 start"]), %% Check that P1H is the one that is used ?check_release_states([old,permanent,unpacked,unpacked]), ?check_running_app(a,"1.0"), %% Install P2A {continue_after_restart, "P1H", [new_emu,new_appl]} = release_handler:install_release("P2A"), %% Node is rebooted by the release_handler:install_release %% (init:reboot) because P2A includes a new erts vsn and the relup %% file contains a 'restart_new_emulator' instruction. ?print(["install_4 P2A installed"]), ok. install_5(TestNode) -> ?print(["install_5 start"]), %% Check that the upgrade was done via a temporary release due to %% new emulator version. {"SASL-test","__new_emulator__P1H"} = init:script_id(), %% Check that P2A is in use. ?check_release_states([old,permanent,unpacked,current]), ?check_running_app(a,"1.1"), X = a:a(), {key2, newval2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), {ok, bval} = a:b(), ?print(["install_5 check env ok"]), ok. install_5a(TestNode) -> ?print(["install_5a start"]), %% Install P1I (this will be a downgrade) {ok, "P1I", [old_emu]} = release_handler:install_release("P1I"), %% Node is rebooted by the release_handler:install_release %% (init:reboot) because P2A includes a new erts vsn and the relup %% file contains a 'restart_new_emulator' instruction. ?print(["install_5a P1I installed"]), ok. install_6(TestNode) -> ?print(["install_6 start"]), %% Check that P1I is used ?check_release_states([old,permanent,current,old]), ?check_running_app(a,"1.1"), %% Make P1I permanent ok = release_handler:make_permanent("P1I"), ?check_release_states([old,old,permanent,old]), ?check_running_app(a,"1.1"), ok. install_6a(TestNode) -> %% Install P2A {continue_after_restart, "P1I", [new_emu]} = release_handler:install_release("P2A"), %% Node is rebooted by the release_handler:install_release %% (init:reboot) because P2A includes a new erts vsn and the relup %% file contains a 'restart_new_emulator' instruction. ?print(["install_6a P2A installed"]), ok. install_7(TestNode) -> ?print(["install_7 start"]), %% Check that the upgrade was done via a temporary release due to %% new emulator version. {"SASL-test","__new_emulator__P1I"} = init:script_id(), % Check that P2A is in use. ?check_release_states([old,old,permanent,current]), ?check_running_app(a,"1.1"), X = a:a(), {key2, newval2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), {ok, bval} = a:b(), ?print(["install_7 check env ok"]), ok. install_7a(TestNode) -> %% Install P1H (this will be a downgrade) {ok, "P1H", [old_emu,old_appl]} = release_handler:install_release("P1H"), %% Node is rebooted by the release_handler:install_release %% (init:reboot) because P2A includes a new erts vsn and the relup %% file contains a 'restart_new_emulator' instruction. ?print(["install_7a P1H installed"]), ok. install_8(TestNode) -> ?print(["install_8 start"]), %% Check that P1H is used ?check_release_states([old,current,permanent,old]), ?check_running_app(a,"1.0"), {ok,"P1H",[new_emu,new_appl]} = release_handler:check_install_release("P2A"), ?print(["install_8 check_install_release P2A ok"]), %% Install P1I and check that it is permanent {ok,"P1H",[{extra, gott}]} = release_handler:install_release("P1I"), ?check_release_states([old,old,permanent,old]), ?check_running_app(a,"1.1"), ok. install_8a(TestNode) -> % Install P2A again {continue_after_restart, "P1I", [new_emu]} = release_handler:install_release("P2A"), %% Node is rebooted by the release_handler:install_release %% (init:reboot) because P2A includes a new erts vsn and the relup %% file contains a 'restart_new_emulator' instruction. ?print(["install_8a P2A installed"]), ok. install_9(TestNode) -> ?print(["install_9 start"]), %% Check that the upgrade was done via a temporary release due to %% new emulator version. {"SASL-test","__new_emulator__P1I"} = init:script_id(), % Check that P2A is used ?check_release_states([old,old,permanent,current]), ?check_running_app(a,"1.1"), X = a:a(), {key2, newval2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), {ok, bval} = a:b(), ?print(["install_9 check env ok"]), ok = release_handler:make_permanent("P2A"), ?check_release_states([old,old,old,permanent]), ?check_running_app(a,"1.1"), ok. % release_handler_SUITE will reboot this node now! install_10(TestNode) -> ?print(["install_10 start"]), % Check that P2A is used ?check_release_states([old,old,old,permanent]), ?check_running_app(a,"1.1"), % Install old P1H ok = release_handler:reboot_old_release("P1H"), ?print(["install_10 reboot_old ok"]), ok. install_11(TestNode) -> ?print(["install_11 start"]), % Check that P1H is permanent ?check_release_states([old,permanent,old,old]), ?check_running_app(a,"1.0"), X = a:a(), {key2, val2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), ?print(["install_11 check env ok"]), %% Remove P1I and P2A and check that a-1.1 and erts- are removed ok = release_handler:remove_release("P2A"), ?check_release_states([old,permanent,old]), ok = release_handler:remove_release("P1I"), ?check_release_states([old,permanent]), {ok, Libs} = file:list_dir(code:lib_dir()), {_,_,StdlibVsn} = lists:keyfind(stdlib,1,application:which_applications()), true = lists:member("stdlib-"++StdlibVsn, Libs), true = lists:member("a-1.0", Libs), false = lists:member("a-1.1", Libs), {ok, Dirs} = file:list_dir(code:root_dir()), ErtsDir = "erts-"++?ertsvsn, [ErtsDir] = lists:filter(fun(Dir) -> lists:prefix("erts-",Dir) end, Dirs), ?print(["install_11 file checks ok"]), ok. % release_handler_SUITE will reboot this node now! install_12(TestNode) -> ?print(["install_12 start"]), % Check that P1H is permanent ?check_release_states([old,permanent]), ?check_running_app(a,"1.0"), X = a:a(), {key2, val2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), ?print(["install_12 check env ok"]), % Install old P1G ok = release_handler:reboot_old_release("P1G"), ?print(["install_12 reboot_old ok"]), ok. install_13(TestNode) -> ?print(["install_13 start"]), % Check that P1G is permanent ?check_release_states([permanent,old]), false = lists:keysearch(a,1,application:loaded_applications()), ?print(["install_13 no a application found - ok"]), %% Remove P1H and check that both versions of application a is removed ok = release_handler:remove_release("P1H"), ?check_release_states([permanent]), {ok, Libs} = file:list_dir(code:lib_dir()), {_,_,StdlibVsn} = lists:keyfind(stdlib,1,application:which_applications()), true = lists:member("stdlib-"++StdlibVsn, Libs), false = lists:member("a-1.0", Libs), false = lists:member("a-1.1", Libs), ?print(["install_13 file checks ok"]), ok. % release_handler_SUITE will reboot this node now! install_14(TestNode) -> ?print(["install_14 start"]), % Check that P1G is permanent ?check_release_states([permanent]), false = lists:keysearch(a,1,application:loaded_applications()), ?print(["install_13 no a application found - ok"]), ok. %%%----------------------------------------------------------------- %%% Ths test checks that an upgrade which both upgrades to a new %%% emulator version, and had a restart_emulator option to %%% systools:make_relup will be restarted twice on upgrade. %%% (On downgrade it will happen only once.) upgrade_restart_1(TestNode,PrivDir) -> ?print([TestNode]), ?print(["upgrade_restart_1 start"]), ?check_release_states([permanent]), {ok, "P2B"} = unpack_release(PrivDir,"rel4"), ?check_release_states([permanent,unpacked]), ?check_release_lib("P2B",["a-1.1"]), ok. upgrade_restart_1a(TestNode) -> ?print(["upgrade_restart_1a start"]), {continue_after_restart,"P1G",[new_emu,add_appl]} = release_handler:install_release("P2B"), ?print(["upgrade_restart_1a P2B installed"]), ok. upgrade_restart_2(TestNode) -> ?print(["upgrade_restart_2 start"]), %% Check that the node has been restarted once more after the tmp release case init:script_id() of {"SASL-test","P2B"} -> upgrade_restart_2a(TestNode); {"SASL-test","__new_emulator__P1G"} -> %% catched the node too early - give it another try {wait,whereis(init)} end. upgrade_restart_2a(TestNode) -> ?print(["upgrade_restart_2a start"]), %% This time we must be there, else something is definitely wrong {"SASL-test","P2B"} = init:script_id(), ?check_release_states([permanent,current]), ?check_running_app(a,"1.1"), ok = release_handler:make_permanent("P2B"), ?check_release_states([old,permanent]), ok. upgrade_restart_2b(TestNode) -> ?print(["upgrade_restart_2b start"]), {ok,"P1G",[old_emu,rm_appl]} = release_handler:install_release("P1G"), ?print(["upgrade_restart_2b P1G installed"]), ok. upgrade_restart_3(TestNode) -> ?print(["upgrade_restart_3 start"]), %% Ideally we should test that the node has only been restarted %% once... but that's not so easy. Let's just check that P1G is running. ?check_release_states([current,permanent]), false = lists:keysearch(a,1,application:loaded_applications()), ?print(["upgrade_restart_3 no a application found - ok"]), ok. %%----------------------------------------------------------------- %% This test starts a client node which uses this node as master %% for the release_handler. %% The client node runs all tests as in installer/1 test case. %% Thus, the client node will be rebooted several times. %% The to_erl /tmp/NODENAME@HOSTNAME/ command can be used to connect %% to the client node. %% run_erl logs for the client can be found in the directory: %% code:root_dir() ++ "/clients/type1/NODENAME@HOSTNAME/log %%----------------------------------------------------------------- client1_1(TestNode,PrivDir,MasterDir,ClientSname) -> TestHost = test_host(), ?print(["client1_1 start"]), {ok,IP} = inet:getaddr(TestHost,inet), erl_boot_server:start([IP]), ok = net_kernel:monitor_nodes(true), Node = start_client(TestNode,client1,ClientSname), trace_disallowed_calls(Node), ?check_release_states_client(Node,[permanent]), %% Check env var for SASL on client node SaslEnv = rpc:call(Node, application, get_all_env, [sasl]), ?print([{client1_1,sasl_env},SaslEnv]), {_,CliDir} = lists:keyfind(client_directory,1,SaslEnv), {_,[Master]} = lists:keyfind(masters,1,SaslEnv), {_,StartCli} = lists:keyfind(start_prg,1,SaslEnv), NodeStr = atom_to_list(Node), [NodeStr,"type1","clients"|_] = lists:reverse(filename:split(CliDir)), true = (Master =:= node()), case os:type() of {unix,_} -> true = (StartCli =:= filename:join([CliDir,"bin","start"])); _ -> ok end, %% Unpack P1H on master {ok, "P1H"} = unpack_release(PrivDir,"rel1"), %% Unpack and install P1H on client Root = code:root_dir(), P1HDir = filename:join([Root, "releases", "P1H"]), %% The AppDirs argument (last arg to set_unpacked) below is really %% not necessary, it could just be [] since the path is the same %% as default. But it is given here in order to force hitting the %% release_handler:check_path function so it can be checked that %% it does not use file:read_file_info on the client node, see %% trace_disallowed_calls/1 and check_disallowed_calls/2 below. %% (OTP-9142) {ok, "P1H"} = rpc:call(Node, release_handler, set_unpacked, [filename:join(P1HDir, "rel1.rel"), [{a,"1.0",filename:join(MasterDir,lib)}]]), ?check_release_states_client(Node,[permanent,unpacked]), ?check_release_lib_client(Node,"P1H",["a-1.0"]), ok = rpc:call(Node, release_handler, install_file, ["P1H", filename:join(P1HDir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, ["P1H", filename:join(P1HDir, "sys.config")]), ok = rpc:call(Node, release_handler, install_file, ["P1H", filename:join(P1HDir, "relup")]), ?print([{release_handler_state, Node}, rpc:call(Node, sys, get_status, [release_handler])]), {ok,"P1G",[new_appl]} = rpc:call(Node, release_handler, check_install_release, ["P1H"]), {ok,"P1G",[new_appl]} = rpc:call(Node, release_handler, install_release, ["P1H"]), ?check_release_states_client(Node,[permanent,current]), ?check_running_app_client(Node,a,"1.0"), Apps = rpc:call(Node, application, which_applications, []), {a,"A CXC 138 11","1.0"} = lists:keyfind(a, 1, Apps), X = rpc:call(Node, a, a, []), {key2, val2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), ?check_disallowed_calls, reboot(TestNode,Node), trace_disallowed_calls(Node), client1_2(TestNode,PrivDir,Node). client1_2(TestNode,PrivDir,Node) -> ?print(["client1_2 start"]), %% Check that P1H is still unpacked, install it and make_permanent ?check_release_states_client(Node,[permanent,unpacked]), {ok,"P1G",[new_appl]} = rpc:call(Node, release_handler, install_release, ["P1H"]), ?check_release_states_client(Node,[permanent,current]), ?check_running_app_client(Node,a,"1.0"), ok = rpc:call(Node, release_handler, make_permanent, ["P1H"]), ?check_release_states_client(Node,[old,permanent]), ?check_disallowed_calls, reboot(TestNode,Node), trace_disallowed_calls(Node), client1_3(TestNode,PrivDir,Node). client1_3(TestNode,PrivDir,Node) -> ?print(["client1_3 start"]), %% Check that P1H is permanent ?check_release_states_client(Node,[old,permanent]), ?check_running_app_client(Node,a,"1.0"), %% Unpack P1I on master {ok, "P1I"} = unpack_release(PrivDir,"rel2"), MasterRoot = code:root_dir(), %% Unpack and install P1I on client P1IDir = filename:join([MasterRoot, "releases", "P1I"]), {ok, "P1I"} = rpc:call(Node, release_handler, set_unpacked, [filename:join(P1IDir, "rel2.rel"),[]]), ?check_release_states_client(Node,[old,permanent,unpacked]), ?check_release_lib_client(Node,"P1I",["a-1.1"]), ok = rpc:call(Node, release_handler, install_file, ["P1I", filename:join(P1IDir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, ["P1I", filename:join(P1IDir, "sys.config")]), ok = rpc:call(Node, release_handler, install_file, ["P1I", filename:join(P1IDir, "relup")]), {ok,"P1H",[{extra, gott}]} = rpc:call(Node, release_handler, check_install_release, ["P1I"]), {error,_} = rpc:call(Node, release_handler, check_install_release, ["P1J"]), {ok,"P1H",[{extra, gott}]} = rpc:call(Node, release_handler, install_release, ["P1I"]), ?check_release_states_client(Node,[old,permanent,current]), ?check_running_app_client(Node,a,"1.1"), X2 = rpc:call(Node, a, a, []), {key2, newval2} = lists:keyfind(key2, 1, X2), {key1, val1} = lists:keyfind(key1, 1, X2), {ok, bval} = rpc:call(Node, a, b, []), %% Unpack P2A on master {ok, "P2A"} = unpack_release(PrivDir,"rel3"), %% Unpack and install P2A on client P2ADir = filename:join([MasterRoot, "releases", "P2A"]), {ok, "P2A"} = rpc:call(Node, release_handler, set_unpacked, [filename:join(P2ADir, "rel3.rel"),[]]), ?check_release_states_client(Node,[old,permanent,current,unpacked]), ?check_release_lib_client(Node,"P2A",["a-1.1"]), ok = rpc:call(Node, release_handler, install_file, ["P2A", filename:join(P2ADir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, ["P2A", filename:join(P2ADir, "sys.config")]), ok = rpc:call(Node, release_handler, install_file, ["P2A", filename:join(P2ADir, "relup")]), {ok, "P1I", [new_emu]} = rpc:call(Node, release_handler, check_install_release, ["P2A"]), %% Reboot from P1H ?check_disallowed_calls, reboot(TestNode,Node), trace_disallowed_calls(Node), client1_4(TestNode,Node). client1_4(TestNode,Node) -> ?print(["client1_4 start"]), %% check that P1H is used ?check_release_states_client(Node,[old,permanent,unpacked,unpacked]), %% since the install_release below reboot the node... ?check_disallowed_calls, cover_client(TestNode,Node,stop_cover), {continue_after_restart, "P1H", [new_emu,new_appl]} = rpc:call(Node, release_handler, install_release, ["P2A"]), %% Reboots the client ! check_reboot(TestNode,Node), trace_disallowed_calls(Node), client1_5(TestNode,Node). client1_5(TestNode,Node) -> ?print(["client1_5 start"]), %% Check that P2A is in use. ?check_release_states_client(Node,[old,permanent,unpacked,current]), ?check_running_app_client(Node,a,"1.1"), X = rpc:call(Node, a, a, []), {key2, newval2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), {ok, bval} = rpc:call(Node, a, b, []), %% since the install_release below reboot the node... ?check_disallowed_calls, cover_client(TestNode,Node,stop_cover), {ok,"P1I",[old_emu]} = rpc:call(Node, release_handler, install_release, ["P1I"]), check_reboot(TestNode,Node), trace_disallowed_calls(Node), client1_6(TestNode,Node). client1_6(TestNode,Node) -> ?print(["client1_6 start"]), ?check_release_states_client(Node,[old,permanent,current,old]), ?check_running_app_client(Node,a,"1.1"), ok = rpc:call(Node, release_handler, make_permanent, ["P1I"]), ?check_release_states_client(Node,[old,old,permanent,old]), %% since the install_release below reboot the node... ?check_disallowed_calls, cover_client(TestNode,Node,stop_cover), {continue_after_restart, "P1I", [new_emu]} = rpc:call(Node, release_handler, install_release, ["P2A"]), %% Reboots the client ! check_reboot(TestNode,Node), trace_disallowed_calls(Node), client1_7(TestNode,Node). client1_7(TestNode,Node) -> ?print(["client1_7 start"]), %% Check that P2A is in use. ?check_release_states_client(Node,[old,old,permanent,current]), ?check_running_app_client(Node,a,"1.1"), X = rpc:call(Node, a, a, []), {key2, newval2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), {ok, bval} = rpc:call(Node, a, b, []), %% since the install_release below reboot the node... ?check_disallowed_calls, cover_client(TestNode,Node,stop_cover), {ok,"P1H",[old_emu,old_appl]} = rpc:call(Node, release_handler, install_release, ["P1H"]), check_reboot(TestNode,Node), trace_disallowed_calls(Node), client1_8(TestNode,Node). client1_8(TestNode,Node) -> ?print(["client1_8 start"]), %% Check that P1H is used ?check_release_states_client(Node,[old,current,permanent,old]), ?check_running_app_client(Node,a,"1.0"), {ok, "P1H", [new_emu,new_appl]} = rpc:call(Node, release_handler, check_install_release, ["P2A"]), {ok,"P1H",[{extra, gott}]} = rpc:call(Node, release_handler, install_release, ["P1I"]), ?check_release_states_client(Node,[old,old,permanent,old]), ?check_running_app_client(Node,a,"1.1"), %% since the install_release below will reboot the node... ?check_disallowed_calls, cover_client(TestNode,Node,stop_cover), %% Install P2A again {continue_after_restart, "P1I", [new_emu]} = rpc:call(Node, release_handler, install_release, ["P2A"]), %% We are rebooted again. check_reboot(TestNode,Node), trace_disallowed_calls(Node), client1_9(TestNode,Node). client1_9(TestNode,Node) -> ?print(["client1_9 start"]), %% Check that P2A is used ?check_release_states_client(Node,[old,old,permanent,current]), ?check_running_app_client(Node,a,"1.1"), X = rpc:call(Node, a, a, []), {key2, newval2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), {ok, bval} = rpc:call(Node, a, b, []), %% Make P2A permanent ok = rpc:call(Node, release_handler, make_permanent, ["P2A"]), ?check_release_states_client(Node,[old,old,old,permanent]), %% Reboot from P2A ?check_disallowed_calls, reboot(TestNode,Node), trace_disallowed_calls(Node), client1_10(TestNode,Node). client1_10(TestNode,Node) -> ?print(["client1_10 start"]), %% Check that P2A is used ?check_release_states_client(Node,[old,old,old,permanent]), %% since the reboot_old_release below will reboot the node ?check_disallowed_calls, cover_client(TestNode,Node,stop_cover), %% Install old P1H rpc:call(Node, release_handler, reboot_old_release, ["P1H"]), %% We are rebooted. check_reboot(TestNode,Node), trace_disallowed_calls(Node), client1_11(TestNode,Node). client1_11(TestNode,Node) -> ?print(["client1_11 start"]), %% Check that P1H is permanent ?check_release_states_client(Node,[old,permanent,old,old]), ?check_running_app_client(Node,a,"1.0"), X = rpc:call(Node, a, a, []), {key2, val2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), %% Remove P1I and P2A from client ok = rpc:call(Node, release_handler, set_removed, ["P2A"]), ?check_release_states_client(Node,[old,permanent,old]), ok = rpc:call(Node, release_handler, set_removed, ["P1I"]), ?check_release_states_client(Node,[old,permanent]), %% Check that P2A and P1I does not exists Rels = rpc:call(Node, release_handler, which_releases, []), false = lists:keysearch("P2A", 2, Rels), false = lists:keysearch("P1I", 2, Rels), X = rpc:call(Node, a, a, []), {key2, val2} = lists:keyfind(key2, 1, X), {key1, val1} = lists:keyfind(key1, 1, X), ?check_disallowed_calls, reboot(TestNode,Node), trace_disallowed_calls(Node), client1_12(TestNode,Node). client1_12(TestNode,Node) -> ?print(["client1_12 start"]), ?check_release_states_client(Node,[old,permanent]), %% since the reboot_old_release below will reboot the node ?check_disallowed_calls, cover_client(TestNode,Node,stop_cover), %% Install old P1G rpc:call(Node, release_handler, reboot_old_release, ["P1G"]), %% We are rebooted. check_reboot(TestNode,Node), trace_disallowed_calls(Node), client1_13(TestNode,Node). client1_13(TestNode,Node) -> ?print(["client1_13 start"]), %% Check that P1G is permanent ?check_release_states_client(Node,[permanent,old]), {error,client_node} = rpc:call(Node,release_handler,remove_release,["P1H"]), ok = rpc:call(Node, release_handler, set_removed, ["P1H"]), ?check_release_states_client(Node,[permanent]), ?check_disallowed_calls, reboot(TestNode,Node), trace_disallowed_calls(Node), client1_14(TestNode,Node). client1_14(TestNode,Node) -> ?print(["client1_14 start"]), %% Check that P1G is permanent ?check_release_states_client(Node,[permanent]), ?check_disallowed_calls, stop_client(TestNode,Node), %% TEST IS OK !! net_kernel:monitor_nodes(false), %% Remove releases from master ok = release_handler:remove_release("P2A"), ok = release_handler:remove_release("P1I"), ok = release_handler:remove_release("P1H"), ok. %% Start tracing of the file module on the client node. This module %% shall never be called, since %% 1) the node is a client from the release_handler's point of view, %% so all file access should be done via rpc calls to the master %% 2) it is started with erl_prim_loader loader set to 'inet' so all %% code loading should be done via the inet to the master %% (OTP-9142) %% This function is called each time the client node is started and to %% check if a call has been made, call check_disallowed_node/0 trace_disallowed_calls(Node) -> MasterProc = self(), rpc:call(Node,dbg,tracer,[process,{fun(T,_) -> MasterProc ! T end,[]}]), rpc:call(Node,dbg,p,[all,call]), rpc:call(Node,dbg,tp,[file,[{'_',[],[{message,{caller}}]}]]), %% File:native_name_encoding/0 is a BIF and OK to use rpc:call(Node,dbg,ctp,[file,native_name_encoding,0]). check_disallowed_calls(TestNode,Line) -> receive Trace when element(1,Trace)==trace -> ?print_line(Line,["Disallowed function called",Trace]), exit({disallowed_function_call,Trace}) after 0 -> ok end. start_client(TestNode,Client,Sname) -> Node = list_to_atom(lists:concat([Sname,"@",test_host()])), case os:type() of {unix,_} -> start_client_unix(TestNode,Sname,Node); {win32,_} -> start_client_win32(TestNode,Client,Sname) end, receive {nodeup, Node} -> wait_started(TestNode,Node) after 30000 -> ?print([{start_client,failed,Node},net_adm:ping(Node)]), ?fail({"can not start", Node}) end. start_client_unix(TestNode,Sname,Node) -> Start = filename:join(["clients", "type1", Node, "bin", "start"]), Cmd = filename:join(code:root_dir(), Start), ?print([{start_client,Sname},Cmd]), Res = rh_test_lib:cmd(Cmd,[],[{"NODENAME",atom_to_list(Sname)}]), ?print([{start_client,result},Res]). start_client_win32(TestNode,Client,ClientSname) -> Name = atom_to_list(ClientSname) ++ "_P1G", RootDir = code:root_dir(), ErtsBinDir = filename:join([RootDir,"erts-"++?ertsvsn,"bin"]), {ClientArgs,RelClientDir} = rh_test_lib:get_client_args(Client,ClientSname, RootDir), StartErlArgs = rh_test_lib:get_start_erl_args(RootDir,RelClientDir, ClientArgs), ServiceArgs = rh_test_lib:get_service_args(RootDir, RelClientDir, ClientSname, StartErlArgs), ?print([{start_client,ClientSname},ServiceArgs]), Erlsrv = filename:nativename(filename:join(ErtsBinDir,"erlsrv")), rh_test_lib:erlsrv(Erlsrv,stop,Name), rh_test_lib:erlsrv(Erlsrv,remove,Name), ok = rh_test_lib:erlsrv(Erlsrv,add,Name,ServiceArgs), ok = rh_test_lib:erlsrv(Erlsrv,start,Name), ?print([{start_client,result},ok]), ok. reboot(TestNode,Node) -> cover_client(TestNode,Node,stop_cover), rpc:call(Node, init, reboot, []), check_reboot(TestNode,Node). %% This way of checking that the node is rebooted will only work if %% the nodes are automatically re-connected after the reboot. This %% happens for master/client (when sasl is started on the client). check_reboot(TestNode,Node) -> receive {nodedown, Node} -> receive {nodeup, Node} -> wait_started(TestNode,Node) after 30000 -> ?fail({Node, "not rebooted",net_adm:ping(Node)}) end after 30000 -> ?fail({Node, "not closing down",net_adm:ping(Node)}) end. stop_client(TestNode,Node) -> cover_client(TestNode,Node,stop_cover), rpc:call(Node, init, stop, []), receive {nodedown, Node} -> ok after 30000 -> ?fail({Node, "not stopping"}) end. wait_started(TestNode,Node) -> case rpc:call(Node, init, get_status, []) of {started, _} -> cover_client(TestNode,Node,start_cover), Node; _ -> timer:sleep(1000), wait_started(TestNode,Node) end. cover_client(TestNode,Node,Func) -> R = rpc:call(TestNode,release_handler_SUITE,Func,[Node]), ?print([{Func,Node,R}]). %%----------------------------------------------------------------- %% This test starts a client node which uses this node as master %% for the release_handler. %% The client node has the name cli2@HOSTNAME. %% The client node is not allowed to do ANY release updates %% as it also have another (non-existing) master node. %% %% The to_erl /tmp/cli2@HOSTNAME/ command can be used to connect %% to the client node. %% run_erl logs for the client can be found in the directory: %% code:root_dir() ++ "/clients/type1/cli2@HOSTNAME/log %%----------------------------------------------------------------- client2(TestNode,PrivDir,ClientSname) -> TestHost = test_host(), ?print(["client2 start"]), %% Clean up if previous test case failed release_handler:remove_release("P1H"), ok = net_kernel:monitor_nodes(true), Node = start_client(TestNode,client2,ClientSname), %% Check env var for SASL on client node SaslEnv = rpc:call(Node, application, get_all_env, [sasl]), ?print([{client1_1,sasl_env},SaslEnv]), {_,CliDir} = lists:keyfind(client_directory,1,SaslEnv), {_,[Master,Master2]} = lists:keyfind(masters,1,SaslEnv), {_,StartCli} = lists:keyfind(start_prg,1,SaslEnv), NodeStr = atom_to_list(Node), [NodeStr,"type1","clients"|_] = lists:reverse(filename:split(CliDir)), true = (Master =:= node()), true = (Master2 =:= list_to_atom("master2@"++TestHost)), case os:type() of {unix,_} -> true = (StartCli =:= filename:join([CliDir,"bin","start"])); _ -> ok end, %% Unpack P1H on master {ok, "P1H"} = unpack_release(PrivDir,"rel1"), %% Try to set P1H unpacked on client Root = code:root_dir(), {error,{bad_masters,[Master2]}} = rpc:call(Node, release_handler, set_unpacked, [filename:join([Root, "releases", "P1H", "rel1.rel"]),[]]), {error,{no_such_release,"P1H"}} = rpc:call(Node, release_handler, check_install_release, ["P1H"]), stop_client(TestNode,Node), %% TEST IS OK !! net_kernel:monitor_nodes(false), release_handler:remove_release("P1H"), ok. stop(Now) -> %% The timestamp is only used for debugging. It is printed by %% release_handler_SUITE also. R = init:stop(), erlang:display({init_stop,Now,R}), R. unpack_p1h(TestNode,PrivDir) -> {ok, "P1H"} = unpack_release(PrivDir,"rel1"), ?check_release_states([permanent,unpacked]), ?check_release_lib("P1H",["a-1.0"]), ok. permanent_p1h(TestNode) -> ?check_release_states([permanent,unpacked]), ?check_release_lib("P1H",["a-1.0"]), {ok,"P1G",[new_appl]} = release_handler:install_release("P1H"), ?check_release_states([permanent,current]), ok = release_handler:make_permanent("P1H"), ?check_release_states([old,permanent]), ok. reg_proc(Name) -> catch unregister(Name), Pid = spawn_link(?MODULE, registered_loop, [Name]), global:register_name(Name, Pid), ok. registered_loop(_Name) -> receive kill -> exit(killed) end. %% Checks that the list of states for all releases (sorted on vsn) %% equals the input States check_release_states(TestNode,Node,States,Line) -> case rpc:call(Node,release_handler,which_releases,[]) of {badrpc,_}=Error -> ?fail_line(Line,{check_release_states,Node,States,Error}); Rels -> ?print_line(Line,["check_release_states:", Rels]), States = [Status || {_,_,_,Status} <- lists:keysort(2,Rels)], ok end. %% Check that the given release (Vsn) sees the correct vsn of App. check_release_lib(TestNode,Node,Vsn,Apps,Line) -> case rpc:call(Node,release_handler,which_releases,[]) of {badrpc,_}=Error -> ?fail_line(Line,{check_release_lib,Node,Vsn,Apps,Error}); Rels -> ?print_line(Line,["check_release_lib:", Rels]), {"SASL-test", Vsn, Libs, _Status} = lists:keyfind(Vsn, 2, Rels), true = lists:all(fun(App) -> lists:member(App,Libs) end,Apps), ok end. %% Check that the given Vsn of App is executed check_running_app(TestNode,Node,App,Vsn,Line) -> case rpc:call(Node,application,which_applications,[]) of {badrpc,_}=Error -> ?fail_line(Line,{check_running_app,Node,App,Vsn,Error}); Apps -> ?print_line(Line,["check_running_app:", Apps]), {App, _, Vsn} = lists:keyfind(App, 1, Apps), ok end. test_host() -> {ok,Host} = inet:gethostname(), Host. unpack_release(PrivDir,Rel) -> copy(filename:join([PrivDir,Rel,Rel++".tar.gz"]), filename:join(code:root_dir(),releases)), release_handler:unpack_release(Rel). copy(Src, DestDir) -> Dest = filename:join(DestDir, filename:basename(Src)), {ok,_} = file:copy(Src, Dest), ok.