%% %% %CopyrightBegin% %% %% Copyright Ericsson AB 2011-2013. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in %% compliance with the License. You should have received a copy of the %% Erlang Public License along with this software. If not, it can be %% retrieved online at http://www.erlang.org/. %% %% Software distributed under the License is distributed on an "AS IS" %% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See %% the License for the specific language governing rights and limitations %% under the License. %% %% %CopyrightEnd% %% -module(release_handler_SUITE). -include_lib("common_test/include/ct.hrl"). -include("test_lib.hrl"). -include_lib("kernel/include/file.hrl"). -compile(export_all). % Default timetrap timeout (set in init_per_testcase). %-define(default_timeout, ?t:minutes(40)). -define(default_timeout, ?t:minutes(10)). suite() -> [{ct_hooks, [ts_install_cth]}]. init_per_suite(Config) -> init_priv_dir(Config), application:start(sasl), Config. end_per_suite(_Config) -> ok. all() -> case os:type() of {unix, _} -> unix_cases(); {win32, _} -> win32_cases() end. unix_cases() -> RunErl = filename:join([code:root_dir(),"bin","run_erl"]), RunErlCases = case filelib:is_file(RunErl) of true -> [{group, release}]; false -> [no_run_erl] end, [target_system, target_system_unicode] ++ RunErlCases ++ cases(). win32_cases() -> [{group,release} | cases()]. %% Cases that can be run on all platforms cases() -> [otp_2740, otp_2760, otp_5761, otp_9402, otp_9417, otp_9395_check_old_code, otp_9395_check_and_purge, otp_9395_update_many_mods, otp_9395_rm_many_mods, instructions, eval_appup, eval_appup_with_restart, supervisor_which_children_timeout, release_handler_which_releases, install_release_syntax_check, upgrade_supervisor, upgrade_supervisor_fail, otp_9864, otp_10463_upgrade_script_regexp]. groups() -> [{release,[], [ {group,release_single}, {group,release_gg} ]}, {release_single,[], [ upgrade, upgrade_restart, client1, client2 ]}, {release_gg,[], [ upgrade_gg ]}]. %% {group,release} %% Top group for all cases using run_erl init_per_group(release, Config) -> Dog = ?t:timetrap(?default_timeout), P1gInstall = filename:join(priv_dir(Config),p1g_install), ok = create_p1g(Config,P1gInstall), ok = create_p1h(Config), ?t:timetrap_cancel(Dog); %% {group,release_single} %% Subgroup of {group,release}, contains all cases that are not %% related to global_group init_per_group(release_single, Config) -> Dog = ?t:timetrap(?default_timeout), %% Create some more releases to upgrade to ok = create_p1i(Config), ok = create_p2a(Config), ok = create_p2b(Config), ?t:timetrap_cancel(Dog); %% {group,release_gg} %% Subgroup of {group,release}. global_group tests. init_per_group(release_gg, Config0) -> Config = [{sname_prefix,release_gg}|Config0], PrivDir = priv_dir(Config), Dog = ?t:timetrap(?default_timeout), reg_print_proc(), %% starts a printer process on this node Snames = [Gg1Sname,Gg2Sname,Gg3Sname,Gg4Sname,Gg5Sname,Gg6Sname] = gg_node_snames(Config), %% kill all possible nodes which are to be used ok = stop_nodes([node_name(Sname) || Sname <- Snames]), %% For gg1, gg3, gg4 and gg5: create a target system running %% P1G, and with P1H unpacked. %% For gg2 and gg6: create a target system running P1H. %% Use gg2 for unpacking and permanenting P1H. ok = copy_installed(Config,p1g_install,[Gg2Sname]), InstallNode = unpack_p1h(Config,Gg2Sname), ok = copy_installed(Config,Gg2Sname,[Gg1Sname,Gg3Sname,Gg4Sname,Gg5Sname]), ok = permanent_p1h(InstallNode), ok = stop_nodes([InstallNode]), ok = copy_installed(Config,Gg2Sname,[Gg6Sname]), %% Replace the sys.config files %% The reason for not creating the releases with these configs in %% the first place (create_p1g, create_p1h) is that then the %% InstallNode (gg2) will be very slow started since it will try %% to synch with the other nodes in the global group. %% Also, the rpc call for installing the P1H release (in %% permanent_p1h/1) would return {rpc,nodedown} due to change of %% global groups. lists:foreach( fun(Sname) -> ReleasesDir = filename:join([PrivDir,Sname,"releases"]), write_term_file(filename:join([ReleasesDir,"P1G","sys.config"]), gg_config([Gg1Sname,Gg3Sname,Gg4Sname,Gg5Sname])), write_term_file(filename:join([ReleasesDir,"P1H","sys.config"]), gg_config([Gg1Sname,Gg2Sname,Gg4Sname, Gg5Sname,Gg6Sname])) end, Snames), ?t:timetrap_cancel(Dog), [{snames,Snames}|Config]. end_per_group(release, Config) -> Dog = ?t:timetrap(?default_timeout), stop_print_proc(), case os:type() of {win32,_} -> delete_all_services(); _ -> ok end, clean_priv_dir(Config,true), ?t:timetrap_cancel(Dog), Config; end_per_group(_GroupName, Config) -> Config. init_per_testcase(Case, Config0) -> Dog = test_server:timetrap(?default_timeout), Config = [{sname_prefix,Case},{watchdog, Dog}|Config0], try apply(?MODULE,Case,[cleanup,Config]) catch error:undef -> ok end, ?t:format("~n======= init_per_testcase done =======~n",[]), Config. end_per_testcase(Case, Config) -> ?t:format("~n======= start end_per_testcase =======~n",[]), Dog=?config(watchdog, Config), test_server:timetrap_cancel(Dog), try apply(?MODULE,Case,[cleanup,Config]) catch error:undef -> ok end, %% DEBUG case ?config(tc_status,Config) of ok -> ok; _Fail -> %% save logs from master and client nodes PrivDir = priv_dir(Config), SaveDir = filename:join(PrivDir,save), FailDir = filename:join(SaveDir,lists:concat(["failed-",Case])), ok = filelib:ensure_dir(filename:join(FailDir,"*")), LogDirs = filelib:wildcard(filename:join([PrivDir,"*",log])) ++ filelib:wildcard(filename:join([PrivDir,"*",clients, type1,"*",log])), lists:foreach( fun(LogDir) -> ["log",Sname|_] = lists:reverse(filename:split(LogDir)), copy_tree(Config,LogDir,Sname,FailDir) end, LogDirs), case filelib:is_file("sasl_erl_crash.dump") of true -> copy_file("sasl_erl_crash.dump",FailDir); _ -> ok end end, %% End DEBUG %% Remove any remaining sasl_erl_crash.dump %% These can occur when a new master@ is started, before %% the old usage of the name is unregistered, causing the node to %% terminate. (This has no effect on the test case, as the node is %% immediately restarted by heart and the test cases wait until %% the node is actually up and running -- see wait_nodes_up/2) file:delete("sasl_erl_crash.dump"), ok. gg_node_snames(Config) -> [tc_sname(Config,X) || X <- [gg1,gg2,gg3,gg4,gg5,gg6]]. %%%----------------------------------------------------------------- %%% TEST CASES %% Executed instead of release group when no run_erl program exists no_run_erl(Config) when is_list(Config) -> {comment, "No run_erl program"}. break(Config) -> erlang:display(test_break), ?t:break(priv_dir(Config)), ok. %% Test upgrade and downgrade of erts and other apps on embedded node upgrade(Conf) when is_list(Conf) -> reg_print_proc(), %% starts a printer process on test_server node ?t:format("upgrade ~p~n",[reg_print_proc]), PrivDir = priv_dir(Conf), Sname = tc_sname(Conf), % nodename for use in this testcase %% Copy the P1G release to a directory for use in this testcase ok = copy_installed(Conf,p1g_install,[Sname]), %% start the test node [TestNode] = start_nodes(Conf,[Sname],"upgrade start"), %% unpack and install P1H ok = rpc_inst(TestNode, install_1, [PrivDir]), stop_cover(TestNode), reboot_and_wait(TestNode,"install_1"), %% reinstall P1H and make it permanent ok = rpc_inst(TestNode, install_2, []), stop_cover(TestNode), reboot_and_wait(TestNode,"install_2",[a]), %% check that P1H is permanent, unpack and install P1I, unpack P2A ok = rpc_inst(TestNode, install_3, [PrivDir]), stop_cover(TestNode), reboot_and_wait(TestNode,"install_3",[a]), %% check that P1H is used, install P2A TestNodeInit1 = rpc:call(TestNode,erlang,whereis,[init]), stop_cover(TestNode), ok = rpc_inst(TestNode, install_4, []), wait_nodes_up([{TestNode,TestNodeInit1}],"install_4",[a]), %% check that P2A is used, then downgrade to P1I TestNodeInit2 = rpc:call(TestNode,erlang,whereis,[init]), ok = rpc_inst(TestNode, install_5, []), stop_cover(TestNode), ok = rpc_inst(TestNode, install_5a, []), wait_nodes_up([{TestNode,TestNodeInit2}],"install_5",[a]), %% Check that P1I is used, then make P1I permanent and install P2A TestNodeInit3 = rpc:call(TestNode,erlang,whereis,[init]), ok = rpc_inst(TestNode, install_6, []), stop_cover(TestNode), ok = rpc_inst(TestNode, install_6a, []), wait_nodes_up([{TestNode,TestNodeInit3}],"install_6",[a]), %% check that P2A is used, then downgrade to P1H TestNodeInit4 = rpc:call(TestNode,erlang,whereis,[init]), ok = rpc_inst(TestNode, install_7, []), stop_cover(TestNode), ok = rpc_inst(TestNode, install_7a, []), wait_nodes_up([{TestNode,TestNodeInit4}],"install_7",[a]), %% check that P1H is used, then install P1I and check that it is permanent %% then reinstall P2A TestNodeInit5 = rpc:call(TestNode,erlang,whereis,[init]), ok = rpc_inst(TestNode, install_8, []), stop_cover(TestNode), ok = rpc_inst(TestNode, install_8a, []), wait_nodes_up([{TestNode,TestNodeInit5}],"install_8",[a]), %% check that P2A is used, make P2A permanent ok = rpc_inst(TestNode, install_9, []), stop_cover(TestNode), reboot_and_wait(TestNode,"install_9",[a]), %% check that P2A is permanent, reboot to old P1H TestNodeInit6 = rpc:call(TestNode,erlang,whereis,[init]), stop_cover(TestNode), ok = rpc_inst(TestNode, install_10, []), wait_nodes_up([{TestNode,TestNodeInit6}],"install_10",[a]), %% check that P1H is permanent, remove P1I and P2A ok = rpc_inst(TestNode, install_11, []), stop_cover(TestNode), reboot_and_wait(TestNode,"install_11",[a]), %% check that P1H is permanent, reboot old P1G TestNodeInit7 = rpc:call(TestNode,erlang,whereis,[init]), stop_cover(TestNode), ok = rpc_inst(TestNode, install_12, []), wait_nodes_up([{TestNode,TestNodeInit7}],"install_12"), %% check that P1G is permanent, remove P1H ok = rpc_inst(TestNode, install_13, []), stop_cover(TestNode), reboot_and_wait(TestNode,"install_13"), %% check that P1G is permanent ok = rpc_inst(TestNode, install_14, []), ok. upgrade(cleanup,Config) -> TestNode = tc_full_node_name(Config), ok = stop_nodes([TestNode]). reboot_and_wait(Node,Tag) -> reboot_and_wait(Node,Tag,[]). reboot_and_wait(Node,Tag,Apps) -> InitPid = rpc:call(Node,erlang,whereis,[init]), ok = rpc:call(Node,init,reboot,[]), wait_nodes_up([{Node,InitPid}],Tag,Apps). %% Test upgrade and downgrade of erts in combination with the %% restart_emulator option to systools:make_relup. For upgrade, this %% should cause one restart before the upgrade code, and one %% after. For downgrade, there will be one restart only - at the end. upgrade_restart(Conf) when is_list(Conf) -> reg_print_proc(), %% starts a printer process on test_server node ?t:format("upgrade_restart ~p~n",[reg_print_proc]), PrivDir = priv_dir(Conf), Sname = tc_sname(Conf), % nodename for use in this testcase %% Copy the P1G release to a directory for use in this testcase ok = copy_installed(Conf,p1g_install,[Sname]), %% start the test node [TestNode] = start_nodes(Conf,[Sname],"upgrade_restart start"), %% unpack and install P2B TestNodeInit1 = rpc:call(TestNode,erlang,whereis,[init]), ok = rpc_inst(TestNode, upgrade_restart_1, [PrivDir]), stop_cover(TestNode), ok = rpc_inst(TestNode, upgrade_restart_1a, []), wait_nodes_up([{TestNode,TestNodeInit1}],"upgrade_restart_1",[a]), %% install P1G case rpc_inst(TestNode, upgrade_restart_2, []) of ok -> ok; {wait,TestNodeInit2a} -> %% We catched the node too early - it was supposed to %% restart twice, so let's wait for one more restart. wait_nodes_up([{TestNode,TestNodeInit2a}],"upgrade_restart_2a",[]), ok = rpc_inst(TestNode, upgrade_restart_2a, []) end, TestNodeInit2 = rpc:call(TestNode,erlang,whereis,[init]), stop_cover(TestNode), ok = rpc_inst(TestNode, upgrade_restart_2b, []), wait_nodes_up([{TestNode,TestNodeInit2}],"upgrade_restart_2b",[]), %% Check that P1G is going again ok = rpc_inst(TestNode, upgrade_restart_3, []), ok. upgrade_restart(cleanup,Config) -> TestNode = tc_full_node_name(Config), ok = stop_nodes([TestNode]). %% Test upgrade and downgrade of erts, diskless client1(Conf) when is_list(Conf) -> reg_print_proc(), %% starts a printer process on test_server node PrivDir = priv_dir(Conf), Master = tc_sname(Conf,master), Client = tc_sname(Conf,client), MasterDir = filename:join(PrivDir,Master), %% Copy the P1G release to a directory for use in this testcase ok = copy_installed(Conf,p1g_install,[Master]), ok = copy_client(Conf,Master,Client,client1), %% start the master node [TestNode] = start_nodes(Conf,[Master],"client1"), ok = rpc_inst(TestNode, client1_1, [PrivDir,MasterDir,Client]), ok. client1(cleanup,Config) -> MasterNode = tc_full_node_name(Config,master), ClientNode = tc_full_node_name(Config,client), ok = stop_nodes([MasterNode,ClientNode]). %% Test diskless release handling when illegal master node client2(Conf) when is_list(Conf) -> reg_print_proc(), %% starts a printer process on test_server node PrivDir = priv_dir(Conf), Master = tc_sname(Conf,master), Client = tc_sname(Conf,client), %% Copy the P1G release to a directory for use in this testcase ok = copy_installed(Conf,p1g_install,[Master]), ok = copy_client(Conf,Master,Client,client2), %% start the master node [TestNode] = start_nodes(Conf,[Master],"client2"), ok = rpc_inst(TestNode, client2, [PrivDir,Client]), ok. client2(cleanup,Config) -> MasterNode = tc_full_node_name(Config,master), ClientNode = tc_full_node_name(Config,client), ok = stop_nodes([MasterNode,ClientNode]). %% Test instructions _not_ tested by the installer module. instructions(Conf) when is_list(Conf) -> DataDir = ?config(data_dir, Conf), Dir = filename:join(DataDir, "c"), true = code:add_path(Dir), check_bstate("no", []), ok = application:start(c), ok = wait_for(bb), check_bstate("first", []), FirstBB = whereis(bb), case whereis(cc) of Pid when is_pid(Pid) -> ok; _ -> ?t:fail("cc not started") end, %% Stop and start cc process S1 = [point_of_no_return, {stop, [aa]}, {apply, {?MODULE, no_cc, []}}, {start, [aa]}], {ok, _} = release_handler_1:eval_script(S1), case whereis(cc) of Pid2 when is_pid(Pid2) -> ok; _ -> ?t:fail("cc not started") end, %% Make bb run old version of b. S2 = [point_of_no_return, {remove, {b, soft_purge, soft_purge}}], {ok, [{b, soft_purge}]} = release_handler_1:eval_script(S2), check_bstate("first", [FirstBB]), false = code:is_loaded(b), {error,{old_processes,b}} = release_handler_1:eval_script(S2), check_bstate("first", [FirstBB]), %% Let supervisor restart bb with new code S3 = [point_of_no_return, {purge, [b]}], {ok, []} = release_handler_1:eval_script(S3), ok = wait_for(bb), check_bstate("second", []), SecondBB = whereis(bb), if SecondBB =:= FirstBB -> ?t:fail("bb not killed"); true -> ok end, %% Restart bb yet another time ok = application:stop(c), ok = application:start(c), ok = wait_for(bb), check_bstate("third", []), ThirdBB = whereis(bb), case ThirdBB of _ when is_pid(ThirdBB) -> ok; undefined -> ?t:fail("bb not started") end, %% Make bb run old version of b. %%c:l(b), check_bstate("third", []), false = code:purge(b), check_bstate("third", []), {module,b} = code:load_file(b), check_bstate("third", [ThirdBB]), %% Let supervisor restart bb yet another time S4 = [point_of_no_return, {remove, {b, brutal_purge, soft_purge}}], {ok, HopefullyEmpty} = release_handler_1:eval_script(S4), ok = wait_for(bb), FourthBB = whereis(bb), case HopefullyEmpty of [{b, soft_purge}] -> %% The process managed to start between purge and delete check_bstate("fourth", [FourthBB]); [] -> %% The process started after delete check_bstate("fourth", []) end, application:stop(c), check_bstate("no", []), ok. instructions(cleanup,Conf) -> application:stop(c), really_del_code([aa,b,c_sup]), code:del_path(filename:join(?config(data_dir,Conf), "c")), ok. really_del_code(Mods) -> lists:foreach(fun(Mod) -> code:purge(Mod), % remove old code code:delete(Mod),% make current code old code:purge(Mod) % remove old code end, Mods). check_bstate(Slogan,ExpectedProcs) -> BB = whereis(bb), ActualProcs = lists:sort([P || P <- processes(), erlang:check_process_code(P, b)]), ExpectedProcs2 = lists:sort(ExpectedProcs), ?t:format("check_bstate:~n~p~n~p~n", [{"bb process", Slogan, BB}, {"Processes running old b code", ActualProcs}]), if Slogan =:= "no", BB =/= undefined -> ?t:fail("instructions failed; process bb is running"); Slogan =/= "no", BB =:= undefined -> ?t:fail("instructions failed; process bb is not running"); ExpectedProcs2 =:= [], ActualProcs =/= ExpectedProcs2 -> ?t:fail("instructions failed; old b processes are running"); ActualProcs =/= ExpectedProcs2 -> ?t:fail("instructions failed; wrong number of old b processes are running"); true -> ok end. wait_for(Name) -> case whereis(Name) of undefined -> timer:sleep(100), wait_for(Name); Pid when is_pid(Pid) -> ok end. no_cc() -> case whereis(cc) of Pid when is_pid(Pid) -> ?t:fail("cc not stopped"); _ -> ok end. %%%----------------------------------------------------------------- %%% Testing of reported bugs and other tickets. %%%----------------------------------------------------------------- %%----------------------------------------------------------------- %% release_handler_1:get_supervised_procs/0 test %%----------------------------------------------------------------- supervisor_which_children_timeout(Conf) -> PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"supervisor_which_children_timeout"), DataDir = ?config(data_dir,Conf), LibDir = filename:join([DataDir,release_handler_timeouts]), Rel1 = create_and_install_fake_first_release(Dir,[{dummy,"0.1",LibDir}]), {ok, Node} = t_start_node(supervisor_which_children_timeout, Rel1, []), Proc = rpc:call(Node, erlang, whereis, [dummy_sup_2]), ok = rpc:call(Node, sys, suspend, [Proc]), Result = {badrpc, {'EXIT', {suspended_supervisor, _}}} = rpc:call(Node, release_handler_1, get_supervised_procs, []), ?t:format("release_handler_1:get_supervised_procs/0: ~p~n", [Result]), ok. supervisor_which_children_timeout(cleanup, _Conf) -> stop_node(node_name(supervisor_which_children_timeout)). %% Test that check_install_release will fail for illegal relup %% instructions, even after point of no return. install_release_syntax_check(Conf) when is_list(Conf) -> S1 = [point_of_no_return, illegal_instruction], {error,{illegal_instruction_after_point_of_no_return,illegal_instruction}} = release_handler_1:check_script(S1,[]), S2 = [point_of_no_return,restart_new_emulator], {error,{illegal_instruction_after_point_of_no_return,restart_new_emulator}} = release_handler_1:check_script(S2,[]), ok. %%----------------------------------------------------------------- %% release_handler:which_releases/0 and 1 test %%----------------------------------------------------------------- release_handler_which_releases(Conf) -> PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"release_handler_which_releases"), DataDir = ?config(data_dir,Conf), LibDir = filename:join([DataDir,release_handler_timeouts]), Rel1 = create_and_install_fake_first_release(Dir,[{dummy,"0.1",LibDir}]), {ok, Node} = t_start_node(release_handler_which_releases, Rel1, []), Releases0 = rpc:call(Node, release_handler, which_releases, []), Releases1 = rpc:call(Node, release_handler, which_releases, [permanent]), Releases2 = rpc:call(Node, release_handler, which_releases, [old]), 1 = length(Releases0), 1 = length(Releases1), 0 = length(Releases2), ?t:format("release_handler:which_releases/0: ~p~n", [Releases0]), ?t:format("release_handler:which_releases/1: ~p~n", [Releases1]), ?t:format("release_handler:which_releases/1: ~p~n", [Releases2]), ok. %%----------------------------------------------------------------- %% Ticket: OTP-2740 %% Slogan: vsn not numeric doesn't work so good in release_handling %%----------------------------------------------------------------- %% Test vsn. otp_2740(Conf) -> DataDir = ?config(data_dir, Conf), Dir = filename:join(DataDir, "otp_2740"), true = code:add_path(Dir), {module, vsn_numeric} = c:l(vsn_numeric), {module, vsn_tuple} = c:l(vsn_tuple), {module, vsn_list} = c:l(vsn_list), {module, vsn_atom} = c:l(vsn_atom), {module, vsn_string} = c:l(vsn_string), 231894 = release_handler_1:get_current_vsn(vsn_numeric), {tuple,["of",terms]} = release_handler_1:get_current_vsn(vsn_tuple), [list,"of",{some,terms}] = release_handler_1:get_current_vsn(vsn_list), atom = release_handler_1:get_current_vsn(vsn_atom), "a string" = release_handler_1:get_current_vsn(vsn_string), true = code:del_path(Dir), ok. %%----------------------------------------------------------------- %% Ticket: OTP-2760 %% Slogan: when an application is removed from a node it is not unloaded %%----------------------------------------------------------------- %% Test that when an application is removed from a node it is also unloaded. otp_2760(Conf) -> PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"otp_2760"), DataDir = ?config(data_dir,Conf), LibDir = filename:join([DataDir,app1_app2,lib1]), Rel1 = create_and_install_fake_first_release(Dir,[{app1,"1.0",LibDir}]), Rel2 = create_fake_upgrade_release(Dir,"after",[],{[Rel1],[Rel1],[LibDir]}), Rel2Dir = filename:dirname(Rel2), %% Start a node with Rel1.boot and check that the app1 module is loaded {ok, Node} = t_start_node(otp_2760, Rel1, []), {file, _} = rpc:call(Node, code, is_loaded, [app1]), %% Execute the relup script and check that app1 is unloaded {ok, [{"after", [{_Rel1Vsn, _Descr, Script}], _}]} = file:consult(filename:join(Rel2Dir, "relup")), {ok, []} = rpc:call(Node, release_handler_1, eval_script, [Script]), false = rpc:call(Node, code, is_loaded, [app1]), ok. otp_2760(cleanup,_Conf) -> stop_node(node_name(otp_2760)). %% Test upgrade using other filesystem than the defined in OTP and %% option {update_paths, true} otp_5761(Conf) when is_list(Conf) -> %% In the following test case, the release upgrade is somewhat %% simplified (since it is not this procedure in itself we want to %% test, but that application code directories are set correctly.) %% Existing Erlang release is used as base, instead of creating %% a new one. %% Set some paths PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"otp_5761"), RelDir = filename:join(?config(data_dir, Conf), "app1_app2"), LibDir1 = filename:join(RelDir, "lib1"), LibDir2 = filename:join(RelDir, "lib2"), %% Create the releases Rel1 = create_and_install_fake_first_release(Dir, [{app1,"1.0",LibDir1}, {app2,"1.0",LibDir1}]), Rel2 = create_fake_upgrade_release(Dir, "2", [{app1,"2.0",LibDir2}, {app2,"1.0",LibDir2}], {[Rel1],[Rel1],[LibDir1]}), Rel1Dir = filename:dirname(Rel1), Rel2Dir = filename:dirname(Rel2), %% Start a slave node {ok, Node} = t_start_node(otp_5761, Rel1, filename:join(Rel1Dir,"sys.config")), %% Bind some variable names that will be used in patternmatching below App11Dir = filename:join([LibDir1, "app1-1.0"]), App12Dir = filename:join([LibDir2, "app1-2.0"]), App2aDir = filename:join([LibDir1, "app2-1.0"]), App2bDir = filename:join([LibDir2, "app2-1.0"]), %% Make sure correct code paths are used App11Dir = rpc:call(Node, code, lib_dir, [app1]), App2aDir = rpc:call(Node, code, lib_dir, [app2]), %% Unpack rel2 (make sure it does not work if an AppDir is bad) LibDir3 = filename:join(RelDir, "lib3"), {error, {no_such_directory, _}} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", [{app1,"2.0",LibDir2}, {app2,"1.0",LibDir3}]]), {ok, RelVsn2} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", [{app1,"2.0",LibDir2}, {app2,"1.0",LibDir2}]]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "relup")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "sys.config")]), %% Install RelVsn2 without {update_paths, true} option {ok, RelVsn1, []} = rpc:call(Node, release_handler, install_release, [RelVsn2]), App12Dir = rpc:call(Node, code, lib_dir, [app1]), App2aDir = rpc:call(Node, code, lib_dir, [app2]), %% Install RelVsn1 again {ok, RelVsn1, []} = rpc:call(Node, release_handler, install_release, [RelVsn1]), %% Install RelVsn2 with {update_paths, true} option {ok, RelVsn1, []} = rpc:call(Node, release_handler, install_release, [RelVsn2, [{update_paths, true}]]), App12Dir = rpc:call(Node, code, lib_dir, [app1]), App2bDir = rpc:call(Node, code, lib_dir, [app2]), %% Install RelVsn1 again {ok, RelVsn1, []} = rpc:call(Node, release_handler, install_release, [RelVsn1, [{update_paths, true}]]), App11Dir = rpc:call(Node, code, lib_dir, [app1]), App2aDir = rpc:call(Node, code, lib_dir, [app2]), ok. otp_5761(cleanup,_Conf) -> stop_node(node_name(otp_5761)). %% When a new version of an application is added, but no module is %% changed - the path was not updated - i.e. code:priv_dir would point %% to the old location. otp_9402(Conf) when is_list(Conf) -> %% Set some paths PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"otp_9402"), LibDir = filename:join(?config(data_dir, Conf), "lib"), %% Create the releases Rel1 = create_and_install_fake_first_release(Dir, [{a,"1.1",LibDir}]), Rel2 = create_fake_upgrade_release(Dir, "2", [{a,"1.2",LibDir}], {[Rel1],[Rel1],[LibDir]}), Rel1Dir = filename:dirname(Rel1), Rel2Dir = filename:dirname(Rel2), %% Start a slave node {ok, Node} = t_start_node(otp_9402, Rel1, filename:join(Rel1Dir,"sys.config")), %% Check path Dir1 = filename:join([LibDir, "a-1.1"]), Dir1 = rpc:call(Node, code, lib_dir, [a]), ABeam = rpc:call(Node, code, which, [a]), %% Install second release, with no changed modules {ok, RelVsn2} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", [{a,"1.2",LibDir}]]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "relup")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "sys.config")]), {ok, RelVsn1, []} = rpc:call(Node, release_handler, install_release, [RelVsn2]), %% Check path Dir2 = filename:join([LibDir, "a-1.2"]), Dir2 = rpc:call(Node, code, lib_dir, [a]), APrivDir2 = rpc:call(Node, code, priv_dir, [a]), true = filelib:is_regular(filename:join(APrivDir2,"file")), %% Just to make sure no modules have been re-loaded ABeam = rpc:call(Node, code, which, [a]), %% Install RelVsn1 again {ok, _OtherVsn, []} = rpc:call(Node, release_handler, install_release, [RelVsn1]), %% Check path Dir1 = rpc:call(Node, code, lib_dir, [a]), APrivDir1 = rpc:call(Node, code, priv_dir, [a]), false = filelib:is_regular(filename:join(APrivDir1,"file")), %% Just to make sure no modules have been re-loaded ABeam = rpc:call(Node, code, which, [a]), ok. otp_9402(cleanup,_Conf) -> stop_node(node_name(otp_9402)). %% When a module is deleted in an appup instruction, the upgrade %% failed if the module was not loaded. otp_9417(Conf) when is_list(Conf) -> %% Set some paths PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"otp_9417"), LibDir = filename:join(?config(data_dir, Conf), "lib"), %% Create the releases Rel1 = create_and_install_fake_first_release(Dir, [{b,"1.0",LibDir}]), Rel2 = create_fake_upgrade_release(Dir, "2", [{b,"2.0",LibDir}], {[Rel1],[Rel1],[LibDir]}), Rel1Dir = filename:dirname(Rel1), Rel2Dir = filename:dirname(Rel2), %% Start a slave node {ok, Node} = t_start_node(otp_9417, Rel1, filename:join(Rel1Dir,"sys.config")), %% Check paths Dir1 = filename:join([LibDir, "b-1.0"]), Dir1 = rpc:call(Node, code, lib_dir, [b]), BLibBeam = filename:join([Dir1,"ebin","b_lib.beam"]), BLibBeam = rpc:call(Node,code,which,[b_lib]), false = rpc:call(Node,code,is_loaded,[b_lib]), false = rpc:call(Node,code,is_loaded,[b_server]), %% Install second release, which removes b_lib module {ok, RelVsn2} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", [{b,"2.0",LibDir}]]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "relup")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "sys.config")]), {ok, _RelVsn1, []} = rpc:call(Node, release_handler, install_release, [RelVsn2]), %% Check that the module does no longer exist false = rpc:call(Node, code, is_loaded, [b_lib]), non_existing = rpc:call(Node, code, which, [b_lib]), %% And check some paths Dir2 = filename:join([LibDir, "b-2.0"]), Dir2 = rpc:call(Node, code, lib_dir, [b]), BServerBeam = filename:join([Dir2,"ebin","b_server.beam"]), {file,BServerBeam} = rpc:call(Node,code,is_loaded,[b_server]), ok. otp_9417(cleanup,_Conf) -> stop_node(node_name(otp_9417)). %% OTP-9395 - performance problems when there are MANY processes %% Test that the procedure of checking for old code before an upgrade %% can be started is faster when there is no old code in %% the system. otp_9395_check_old_code(Conf) when is_list(Conf) -> NProcs = 1000, MPath = filename:join([?config(data_dir,Conf),"lib","many_mods-1.0","ebin"]), code:add_path(MPath), %% Start NProc processes, each referencing each module {Modules,Pids} = m:start(NProcs), %% Load each module again in order to get old code [code:load_file(Mod) || Mod <- Modules], true = erlang:check_old_code(m10), S = [point_of_no_return | [{remove,{M,soft_purge,soft_purge}} || M <- Modules]], %% Do the old code check, then purge, and redo {T1,{ok,PurgeMods}} = timer:tc(release_handler_1,check_script,[S,[]]), true = (lists:sort(PurgeMods) == lists:sort(Modules)), [code:purge(M) || M <- PurgeMods], {T2,{ok,[]}} = timer:tc(release_handler_1,check_script,[S,[]]), %% Cleanup lists:foreach(fun(Pid) -> Pid ! stop end, Pids), lists:foreach(fun(Mod) -> code:purge(Mod), code:delete(Mod), code:purge(Mod) end, Modules), code:del_path(MPath), %% Test that second run was much faster than the first if T2 > 0 -> X = T1/T2, ct:log("~p procs, ~p mods -> ~n" "\tWith old code: ~.2f sec~n" "\tAfter purge: ~.2f sec~n" "\tT1/T2: ~.2f", [NProcs,length(Modules),T1/1000000,T2/1000000,X]), if X < 1 -> ct:fail({no_improvement_after_purge,X}); true -> ok end; T1 > 0 -> %% Means T1/T2 = infinite ok; true -> ct:fail({unexpected_values,T1,T2}) end, ok. %% OTP-9395 - performance problems when there are MANY processes %% Added option 'purge' to check_install_release otp_9395_check_and_purge(Conf) when is_list(Conf) -> %% Set some paths PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"otp_9395_check_and_purge"), LibDir = filename:join(?config(data_dir, Conf), "lib"), %% Create the releases Rel1 = create_and_install_fake_first_release(Dir, [{b,"1.0",LibDir}]), Rel2 = create_fake_upgrade_release(Dir, "2", [{b,"2.0",LibDir}], {[Rel1],[Rel1],[LibDir]}), Rel1Dir = filename:dirname(Rel1), Rel2Dir = filename:dirname(Rel2), %% Start a slave node {ok, Node} = t_start_node(otp_9395_check_and_purge, Rel1, filename:join(Rel1Dir,"sys.config")), %% Make sure there is old code for b_lib and b_server rpc:call(Node,code,load_file,[b_lib]), rpc:call(Node,code,load_file,[b_lib]), rpc:call(Node,code,load_file,[b_server]), rpc:call(Node,code,load_file,[b_server]), true = rpc:call(Node,erlang,check_old_code,[b_lib]), true = rpc:call(Node,erlang,check_old_code,[b_server]), %% Unpack second release, which removes b_lib module and loads b_server {ok, RelVsn2} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", [{b,"2.0",LibDir}]]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "relup")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "sys.config")]), %% Do check_install_release, and check that old code still exists {ok, _RelVsn1, []} = rpc:call(Node, release_handler, check_install_release, [RelVsn2]), true = rpc:call(Node,erlang,check_old_code,[b_lib]), true = rpc:call(Node,erlang,check_old_code,[b_server]), %% Do check_install_release with option 'purge' and check that old %% code is gone {ok, _RelVsn1, []} = rpc:call(Node, release_handler, check_install_release, [RelVsn2,[purge]]), false = rpc:call(Node,erlang,check_old_code,[b_lib]), false = rpc:call(Node,erlang,check_old_code,[b_server]), ok. otp_9395_check_and_purge(cleanup,_Conf) -> stop_node(node_name(otp_9395_check_and_purge)). %% OTP-9395 - performance problems when there are MANY processes %% Upgrade which updates many modules (brutal_purge) otp_9395_update_many_mods(Conf) when is_list(Conf) -> %% Set some paths PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"otp_9395_update_many_mods"), LibDir = filename:join(?config(data_dir, Conf), "lib"), %% Create the releases Rel1 = create_and_install_fake_first_release(Dir, [{many_mods,"1.0",LibDir}]), Rel2 = create_fake_upgrade_release(Dir, "2", [{many_mods,"1.1",LibDir}], {[Rel1],[Rel1],[LibDir]}), Rel1Dir = filename:dirname(Rel1), Rel2Dir = filename:dirname(Rel2), %% Start a slave node {ok, Node} = t_start_node(otp_9395_update_many_mods, Rel1, filename:join(Rel1Dir,"sys.config")), %% Start a lot of processes on the new node, all with refs to each %% module that will be updated NProcs = 1000, {Modules,Pids1} = rpc:call(Node,m,start,[NProcs]), %% Then load modules in order to get old code [rpc:call(Node,code,load_file,[Mod]) || Mod <- Modules], true = rpc:call(Node,erlang,check_old_code,[m10]), %% Unpack second release, which updates all mX modules {ok, RelVsn2} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", [{many_mods,"1.1",LibDir}]]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "relup")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "sys.config")]), %% First, install release directly and check how much time it takes rpc:call(Node,erlang,system_flag,[scheduler_wall_time,true]), {TInst0,{ok, _, []}} = timer:tc(rpc,call,[Node, release_handler, install_release, [RelVsn2]]), SWT0 = rpc:call(Node,erlang,statistics,[scheduler_wall_time]), % ct:log("install_release: ~.2f",[TInst0/1000000]), %% Restore to old release, spawn processes again and load to get old code {_,RelVsn1} = init:script_id(), {_TInst1,{ok, _, []}} = timer:tc(rpc,call,[Node, release_handler, install_release, [RelVsn1]]), % ct:log("install_release: ~.2f",[_TInst1/1000000]), [exit(Pid,kill) || Pid <- Pids1], {Modules,_Pids2} = rpc:call(Node,m,start,[NProcs]), [rpc:call(Node,code,load_file,[Mod]) || Mod <- Modules], true = rpc:call(Node,erlang,check_old_code,[m10]), %% Run check_install_release with purge before install this time {_TCheck,{ok, _RelVsn1, []}} = timer:tc(rpc,call,[Node, release_handler, check_install_release, [RelVsn2,[purge]]]), % ct:log("check_install_release with purge: ~.2f",[_TCheck/1000000]), %% Finally install release after check and purge, and check that %% this install was faster than the first. rpc:call(Node,erlang,system_flag,[scheduler_wall_time,false]), rpc:call(Node,erlang,system_flag,[scheduler_wall_time,true]), {TInst2,{ok, _RelVsn1, []}} = timer:tc(rpc,call,[Node, release_handler, install_release, [RelVsn2]]), SWT2 = rpc:call(Node,erlang,statistics,[scheduler_wall_time]), % ct:log("install_release: ~.2f",[TInst2/1000000]), %% Calculate and print real time and CPU utilization SumFun = fun({_,A,T},{AAcc,TAcc}) -> {A+AAcc,T+TAcc} end, {SumA0,SumT0} = lists:foldl(SumFun,{0,0},SWT0), {SumA2,SumT2} = lists:foldl(SumFun,{0,0},SWT2), TI0=TInst0/1000000, TI2=TInst2/1000000, CPU0=SumA0/SumT0, CPU2=SumA2/SumT2, X0 = TI0*CPU0, X2 = TI2*CPU2, ct:log("First run: T=~.2fsec, CPU=~.2f, T*CPU=~.2f~n" "Second run: T=~.2fsec, CPU=~.2f, T*CPU=~.2f~n", [TI0, CPU0, X0, TI2, CPU2, X2]), true = (X2 =< X0), % disregarding wait time for file access etc. ok. otp_9395_update_many_mods(cleanup,_Conf) -> stop_node(node_name(otp_9395_update_many_mods)). %% OTP-9395 - performance problems when there are MANY processes %% Upgrade which removes many modules (brutal_purge) otp_9395_rm_many_mods(Conf) when is_list(Conf) -> %% Set some paths PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"otp_9395_rm_many_mods"), LibDir = filename:join(?config(data_dir, Conf), "lib"), %% Create the releases Rel1 = create_and_install_fake_first_release(Dir, [{many_mods,"1.0",LibDir}]), Rel2 = create_fake_upgrade_release(Dir, "2", [{many_mods,"2.0",LibDir}], {[Rel1],[Rel1],[LibDir]}), Rel1Dir = filename:dirname(Rel1), Rel2Dir = filename:dirname(Rel2), %% Start a slave node {ok, Node} = t_start_node(otp_9395_rm_many_mods, Rel1, filename:join(Rel1Dir,"sys.config")), %% Start a lot of processes on the new node, all with refs to each %% module that will be updated NProcs = 1000, {Modules,Pids1} = rpc:call(Node,m,start,[NProcs]), %% Then load modules in order to get old code [rpc:call(Node,code,load_file,[Mod]) || Mod <- Modules], true = rpc:call(Node,erlang,check_old_code,[m10]), %% Unpack second release, which removes all mX modules {ok, RelVsn2} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", [{many_mods,"2.0",LibDir}]]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "relup")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "sys.config")]), %% First, install release directly and check how much time it takes rpc:call(Node,erlang,system_flag,[scheduler_wall_time,true]), {TInst0,{ok, _, []}} = timer:tc(rpc,call,[Node, release_handler, install_release, [RelVsn2]]), SWT0 = rpc:call(Node,erlang,statistics,[scheduler_wall_time]), % ct:log("install_release: ~.2f",[TInst0/1000000]), %% Restore to old release, spawn processes again and load to get old code {_,RelVsn1} = init:script_id(), {_TInst1,{ok, _, []}} = timer:tc(rpc,call,[Node, release_handler, install_release, [RelVsn1]]), % ct:log("install_release: ~.2f",[_TInst1/1000000]), [exit(Pid,kill) || Pid <- Pids1], {Modules,_Pids2} = rpc:call(Node,m,start,[NProcs]), [rpc:call(Node,code,load_file,[Mod]) || Mod <- Modules], true = rpc:call(Node,erlang,check_old_code,[m10]), %% Run check_install_release with purge before install this time {_TCheck,{ok, _RelVsn1, []}} = timer:tc(rpc,call,[Node, release_handler, check_install_release, [RelVsn2,[purge]]]), % ct:log("check_install_release with purge: ~.2f",[_TCheck/1000000]), %% Finally install release after check and purge, and check that %% this install was faster than the first. rpc:call(Node,erlang,system_flag,[scheduler_wall_time,false]), rpc:call(Node,erlang,system_flag,[scheduler_wall_time,true]), {TInst2,{ok, _RelVsn1, []}} = timer:tc(rpc,call,[Node, release_handler, install_release, [RelVsn2]]), SWT2 = rpc:call(Node,erlang,statistics,[scheduler_wall_time]), % ct:log("install_release: ~.2f",[TInst2/1000000]), %% Calculate and print real time and CPU utilization SumFun = fun({_,A,T},{AAcc,TAcc}) -> {A+AAcc,T+TAcc} end, {SumA0,SumT0} = lists:foldl(SumFun,{0,0},SWT0), {SumA2,SumT2} = lists:foldl(SumFun,{0,0},SWT2), TI0=TInst0/1000000, TI2=TInst2/1000000, CPU0=SumA0/SumT0, CPU2=SumA2/SumT2, X0 = TI0*CPU0, X2 = TI2*CPU2, ct:log("First run: T=~.2fsec, CPU=~.2f, T*CPU=~.2f~n" "Second run: T=~.2fsec, CPU=~.2f, T*CPU=~.2f~n", [TI0, CPU0, X0, TI2, CPU2, X2]), true = (X2 =< X0), % disregarding wait time for file access etc. ok. otp_9395_rm_many_mods(cleanup,_Conf) -> stop_node(node_name(otp_9395_rm_many_mods)). otp_9864(Conf) -> case os:type() of {win32,_} -> {skip,"Testing handling of symlinks - skipped on windows"}; _ -> do_otp_9864(Conf) end. do_otp_9864(Conf) -> %% Set some paths PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"otp_9864"), RelDir = filename:join(?config(data_dir, Conf), "app1_app2"), %% Copy libs to priv_dir because remove_release will remove some %% of these again, and we don't want to remove anything from %% data_dir copy_tree(Conf,filename:join(RelDir, "lib1"),Dir), copy_tree(Conf,filename:join(RelDir, "lib2"),Dir), LibDir1 = filename:join(Dir, "lib1"), LibDir2 = filename:join(Dir, "lib2"), %% Create the releases Rel1 = create_and_install_fake_first_release(Dir, [{app1,"1.0",LibDir1}, {app2,"1.0",LibDir1}]), Rel2 = create_fake_upgrade_release(Dir, "2", [{app1,"2.0",LibDir2}, {app2,"1.0",LibDir2}], {[Rel1],[Rel1],[LibDir1]}), Rel1Dir = filename:dirname(Rel1), Rel2Dir = filename:dirname(Rel2), %% Start a slave node {ok, Node} = t_start_node(otp_9864, Rel1, filename:join(Rel1Dir,"sys.config")), %% Unpack rel2 (make sure it does not work if an AppDir is bad) {ok, RelVsn2} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", [{app1,"2.0",LibDir2}, {app2,"1.0",LibDir2}]]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "relup")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "sys.config")]), %% Install RelVsn2 {ok, RelVsn1, []} = rpc:call(Node, release_handler, install_release, [RelVsn2]), %% Create a symlink inside release 2 Releases2Dir = filename:join([Dir,"releases","2"]), Link = filename:join(Releases2Dir,"foo_symlink_dir"), file:make_symlink(Releases2Dir,Link), %% Back down to RelVsn1 {ok, RelVsn1, []} = rpc:call(Node, release_handler, install_release, [RelVsn1]), %% This will fail if symlinks are not handled ok = rpc:call(Node, release_handler, remove_release, [RelVsn2]), ok. otp_9864(cleanup,_Conf) -> stop_node(node_name(otp_9864)). upgrade_supervisor(Conf) when is_list(Conf) -> %% Set some paths PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"upgrade_supervisor"), LibDir = filename:join(?config(data_dir, Conf), "lib"), %% Create the releases Lib1 = [{a,"1.0",LibDir}], Lib2 = [{a,"9.0",LibDir}], Rel1 = create_and_install_fake_first_release(Dir,Lib1), Rel2 = create_fake_upgrade_release(Dir,"2",Lib2,{[Rel1],[Rel1],[LibDir]}), Rel1Dir = filename:dirname(Rel1), Rel2Dir = filename:dirname(Rel2), %% Start a slave node {ok, Node} = t_start_node(upgrade_supervisor, Rel1, filename:join(Rel1Dir,"sys.config")), %% Check path Dir1 = filename:join([LibDir, "a-1.0"]), Dir1 = rpc:call(Node, code, lib_dir, [a]), ASupBeam1 = filename:join([Dir1,ebin,"a_sup.beam"]), ASupBeam1 = rpc:call(Node, code, which, [a_sup]), %% Install second release, with no changed modules {ok, RelVsn2} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", Lib2]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "relup")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "sys.config")]), {ok, _RelVsn1, []} = rpc:call(Node, release_handler, install_release, [RelVsn2]), %% Check that libdir is changed Dir2 = filename:join([LibDir, "a-9.0"]), Dir2 = rpc:call(Node, code, lib_dir, [a]), ASupBeam2 = filename:join([Dir2,ebin,"a_sup.beam"]), ASupBeam2 = rpc:call(Node, code, which, [a_sup]), %% Check that the restart strategy and child spec is updated {status, _, {module, _}, [_, _, _, _, [_,_,{data,[{"State",State}]}]]} = rpc:call(Node,sys,get_status,[a_sup]), {state,_,RestartStrategy,[Child],_,_,_,_,_,_} = State, one_for_all = RestartStrategy, % changed from one_for_one {child,_,_,_,_,brutal_kill,_,_} = Child, % changed from timeout 2000 ok. %% Check that if the supervisor fails, then the upgrade is rolled back %% and an ok error message is returned upgrade_supervisor_fail(Conf) when is_list(Conf) -> %% Set some paths PrivDir = priv_dir(Conf), Dir = filename:join(PrivDir,"upgrade_supervisor_fail"), LibDir = filename:join(?config(data_dir, Conf), "lib"), %% Create the releases Lib1 = [{a,"1.0",LibDir}], Lib2 = [{a,"9.1",LibDir}], Rel1 = create_and_install_fake_first_release(Dir,Lib1), Rel2 = create_fake_upgrade_release(Dir,"2",Lib2,{[Rel1],[Rel1],[LibDir]}), Rel1Dir = filename:dirname(Rel1), Rel2Dir = filename:dirname(Rel2), %% Start a slave node {ok, Node} = t_start_node(upgrade_supervisor_fail, Rel1, filename:join(Rel1Dir,"sys.config")), %% Check path Dir1 = filename:join([LibDir, "a-1.0"]), Dir1 = rpc:call(Node, code, lib_dir, [a]), ASupBeam1 = filename:join([Dir1,ebin,"a_sup.beam"]), ASupBeam1 = rpc:call(Node, code, which, [a_sup]), %% Install second release, with no changed modules {ok, RelVsn2} = rpc:call(Node, release_handler, set_unpacked, [Rel2++".rel", Lib2]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "relup")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "start.boot")]), ok = rpc:call(Node, release_handler, install_file, [RelVsn2, filename:join(Rel2Dir, "sys.config")]), ok = net_kernel:monitor_nodes(true), {error,{code_change_failed,_Pid,a_sup,_Vsn, {error,{invalid_shutdown,brutal_kil}}}} = rpc:call(Node, release_handler, install_release, [RelVsn2]), %% Check that the upgrade is terminated - normally this would mean %% rollback, but since this testcase is very simplified the node %% is not started with heart supervision and will therefore not be %% restarted. So we just check that the node goes down. receive {nodedown,Node} -> ok after 10000 -> ct:fail(failed_upgrade_never_restarted_node) end, ok. %% Test upgrade and downgrade of applications eval_appup(Conf) when is_list(Conf) -> %% OTP-6162 %% Create an ETS table which is updated by app1 if there is any %% change made to the application configuration parameter 'var' %% (see config_change/3 in myrel/lib1|2/app1-1|2.0/src/app1.erl) ets:new(otp_6162, [set, public, named_table]), %% Set some paths RelDir = filename:join(?config(data_dir, Conf), "app1_app2"), App11Dir = filename:join([RelDir, "lib1", "app1-1.0"]), App12Dir = filename:join([RelDir, "lib2", "app1-2.0"]), EbinDir = filename:join(App11Dir, "ebin"), %% Start app1-1.0 code:add_patha(EbinDir), ok = application:start(app1), App11Dir = code:lib_dir(app1), ok = gen_server:call(harry, error), %% Read appup script {ok,"2.0",UpScript} = release_handler:upgrade_script(app1,App12Dir), [{load_object_code,_}, point_of_no_return, {load,_}] = UpScript, %% Upgrade to app1-2.0 {ok, []} = release_handler:upgrade_app(app1, App12Dir), App12Dir = code:lib_dir(app1), error = gen_server:call(harry, error), %% OTP-6162 %% Value of config parameter 'var' should now be 'val2' %% (see myrel/lib2/app1-2.0/ebin/app1.app) [{var,val2}] = ets:lookup(otp_6162, var), %% Read appup script {ok,DnScript} = release_handler:downgrade_script(app1,"1.0",App11Dir), [{load_object_code,_}, point_of_no_return, {load,_}] = DnScript, %% Downgrade to app1-1.0 {ok, []} = release_handler:downgrade_app(app1,"1.0",App11Dir), App11Dir = code:lib_dir(app1), ok = gen_server:call(harry, error), %% OTP-6162 %% Value of config parameter 'var' should now be 'val1' %% (see myrel/lib1/app1-1.0/ebin/app1.app) [{var,val1}] = ets:lookup(otp_6162, var), ok = application:stop(app1), ok = application:unload(app1), true = code:del_path(EbinDir), ok. %% Test upgrade and downgrade of applications when appup contains %% restart_emulator and restart_new_emulator instructions eval_appup_with_restart(Conf) when is_list(Conf) -> %% Set some paths RelDir = filename:join(?config(data_dir, Conf), "app1_app2"), App11Dir = filename:join([RelDir, "lib1", "app1-1.0"]), App13Dir = filename:join([RelDir, "lib3", "app1-3.0"]), %restart_emulator App14Dir = filename:join([RelDir, "lib4", "app1-4.0"]), %restart_new_emulator EbinDir1 = filename:join(App11Dir, "ebin"), EbinDir3 = filename:join(App13Dir, "ebin"), EbinDir4 = filename:join(App14Dir, "ebin"), %% Start app1-1.0 code:add_patha(EbinDir1), ok = application:start(app1), App11Dir = code:lib_dir(app1), %% Read appup script {ok,"3.0",UpScript3} = release_handler:upgrade_script(app1,App13Dir), [{load_object_code,_}, point_of_no_return, {load,_}, restart_emulator] = UpScript3, %% Upgrade to app1-3.0 - restart_emulator restart_emulator = release_handler:upgrade_app(app1, App13Dir), App13Dir = code:lib_dir(app1), %% Fake full upgrade to 3.0 {ok,AppSpec} = file:consult(filename:join([App13Dir,"ebin","app1.app"])), application_controller:change_application_data(AppSpec,[]), %% Read appup script {ok,"4.0",UpScript4} = release_handler:upgrade_script(app1,App14Dir), [restart_new_emulator,point_of_no_return] = UpScript4, %% Try pgrade to app1-4.0 - restart_new_emulator {error,restart_new_emulator} = release_handler:upgrade_app(app1, App14Dir), App13Dir = code:lib_dir(app1), %% Read appup script {ok,DnScript1} = release_handler:downgrade_script(app1,"1.0",App11Dir), [{load_object_code,_}, point_of_no_return, {load,_}, restart_emulator] = DnScript1, %% Still running 3.0 - downgrade to app1-1.0 - restart_emulator restart_emulator = release_handler:downgrade_app(app1,"1.0",App11Dir), App11Dir = code:lib_dir(app1), ok = application:stop(app1), ok = application:unload(app1), true = code:del_path(EbinDir1), %% Start again as version 4.0 code:add_patha(EbinDir4), ok = application:start(app1), App14Dir = code:lib_dir(app1), %% Read appup script {ok,DnScript3} = release_handler:downgrade_script(app1,"3.0",App13Dir), [point_of_no_return,restart_emulator] = DnScript3, %% Downgrade to app1-3.0 - restart_new_emulator restart_emulator = release_handler:downgrade_app(app1,"3.0",App13Dir), App13Dir = code:lib_dir(app1), ok = application:stop(app1), ok = application:unload(app1), true = code:del_path(EbinDir3), false = code:del_path(EbinDir1), false = code:del_path(EbinDir4), ok. %% Test the example/target_system.erl module target_system(Conf) when is_list(Conf) -> PrivDir = priv_dir(Conf), target_system1(Conf,PrivDir). target_system1(Conf,PrivDir) -> DataDir = ?config(data_dir,Conf), TargetCreateDir = filename:join([PrivDir,"target_system","create"]), TargetInstallDir = filename:join([PrivDir,"target_system","install"]), ok = filelib:ensure_dir(filename:join(TargetCreateDir,"xx")), ok = filelib:ensure_dir(filename:join(TargetInstallDir,"xx")), %% Create the .rel file RelName = filename:join(TargetCreateDir,"ts-1.0"), RelFile = RelName++".rel", RelVsn = "R1A", create_rel_file(RelFile,RelName,RelVsn,current,[{a, "1.0"}]), %% Build the target_system module ExamplesEbin = filename:join([code:lib_dir(sasl),examples,ebin]), TSPath = case filelib:is_file(filename:join(ExamplesEbin,"target_system.beam")) of true -> ExamplesEbin; false -> {ok,_} = compile:file(filename:join(DataDir,"target_system.erl"), [{outdir,TargetCreateDir}]), TargetCreateDir end, code:add_path(TSPath), %% Create the release target_system:create(RelName,[{path,[filename:join([DataDir, lib, "a-1.0", ebin])]}]), %% Install the release target_system:install(RelName,TargetInstallDir), code:del_path(TSPath), %% Check that all files exist in installation ErtsDir = app_dir(erts,current), true = filelib:is_dir(filename:join(TargetInstallDir,ErtsDir)), LibDir = filename:join(TargetInstallDir,lib), KernelVsn = vsn(kernel,current), StdlibVsn = vsn(stdlib,current), SaslVsn = vsn(sasl,current), RelFileBasename = filename:basename(RelFile), KernelLibDir = filename:join(LibDir,"kernel-"++KernelVsn), true = filelib:is_dir(KernelLibDir), true = filelib:is_dir(filename:join(LibDir,"stdlib-"++StdlibVsn)), true = filelib:is_dir(filename:join(LibDir,"sasl-"++SaslVsn)), true = filelib:is_dir(filename:join(LibDir,"a-1.0")), RelDir = filename:join(TargetInstallDir,releases), true = filelib:is_regular(filename:join(RelDir,"RELEASES")), true = filelib:is_regular(filename:join(RelDir,"start_erl.data")), true = filelib:is_regular(filename:join(RelDir,RelFileBasename)), true = filelib:is_dir(filename:join(RelDir,RelVsn)), StartBoot = filename:join([RelDir,RelVsn,"start.boot"]), true = filelib:is_regular(StartBoot), true = filelib:is_regular(filename:join([RelDir,RelVsn,RelFileBasename])), BinDir = filename:join(TargetInstallDir,bin), Erl = filename:join(BinDir,erl), true = filelib:is_regular(Erl), true = filelib:is_regular(filename:join(BinDir,"start.boot")), true = filelib:is_regular(filename:join(BinDir,start_erl)), true = filelib:is_regular(filename:join(BinDir,start)), true = filelib:is_regular(filename:join(BinDir,epmd)), true = filelib:is_regular(filename:join(BinDir,run_erl)), true = filelib:is_regular(filename:join(BinDir,to_erl)), %% Check content of files ErtsVsn = vsn(erts,current), {ok,SED} = file:read_file(filename:join(RelDir,"start_erl.data")), [ErtsVsn,RelVsn] = string:tokens(binary_to_list(SED),"\s\n"), %% Check that installation can be started Sname = list_to_atom(atom_to_list(?MODULE) ++ "-target_system"), {ok,Node} = start_target_node_with_erl(Erl,Sname,StartBoot), TargetInstallDir = rpc:call(Node,code,root_dir,[]), KernelLibDir = rpc:call(Node,code,lib_dir,[kernel]), [{RelName,RelVsn,_Apps,permanent}] = rpc:call(Node,release_handler,which_releases,[]), ?t:format("Target node ok:~nRootDir: ~ts~nKernelLibDir: ~ts~nRelease: ~ts", [TargetInstallDir,KernelLibDir,RelName]), ok. target_system(cleanup,_Conf) -> Sname = list_to_atom(atom_to_list(?MODULE) ++ "-target_system"), stop_target_node(node_name(Sname)), ok. start_target_node_with_erl(Erl,Sname,Boot) -> FullName = node_name(Sname), FilenameMode = case file:native_name_encoding() of latin1 -> "+fnl"; utf8 -> "+fnui" end, Args = [FilenameMode,"-detached", "-noinput","-sname",atom_to_list(Sname), "-boot",filename:rootname(Boot)], ?t:format("Starting node ~p: ~ts~n", [FullName, lists:flatten([[X," "] || X <- [Erl|Args]])]), ?t:format("open_port({spawn_executable, ~tp}, [{args,~p}])~n",[Erl,Args]), case open_port({spawn_executable, Erl}, [{args,Args}]) of Port when is_port(Port) -> unlink(Port), erlang:port_close(Port), %% timer:sleep(10000), %% io:format("PING: ~p~n",[net_adm:ping(FullName)]), ok = wait_nodes_up([FullName],"target_system test node"), {ok,FullName}; Error -> ?t:fail({failed_to_start_node, FullName, Error}) end. stop_target_node(Node) -> monitor_node(Node, true), _ = rpc:call(Node,erlang,halt,[]), receive {nodedown, Node} -> ok end. %% Test that the example/target_system.erl module can create and %% install under a path which includes unicode characters target_system_unicode(Conf) when is_list(Conf) -> PrivDir = priv_dir(Conf), UnicodeStr = [945,946], % alhpa beta in greek letters UnicodePrivDir = filename:join(PrivDir,UnicodeStr), PA = filename:dirname(code:which(?MODULE)), %% Make sure this runs on a node with unicode file name mode Sname = list_to_atom(atom_to_list(?MODULE) ++ "-target_system_unicode"), {ok,Node} = ?t:start_node(Sname,peer,[{args,"+fnui -pa " ++ PA}]), ok = rpc:call(Node,file,make_dir,[UnicodePrivDir]), case rpc:call(Node,application,start,[sasl]) of ok -> ok; {error,{already_started,sasl}} -> ok; Error -> ?t:fail({failed_to_start_sasl_on_test_node,Node,Error}) end, ok = rpc:call(Node,?MODULE,target_system1,[Conf,UnicodePrivDir]), ok. target_system_unicode(cleanup,Conf) -> Sname = list_to_atom(atom_to_list(?MODULE) ++ "-target_system_unicode"), Node = node_name(Sname), _ = rpc:call(Node,?MODULE,target_system,[cleanup,Conf]), _ = stop_node(Node), ok. %%%================================================================= %%% Testing global groups. %%%================================================================= %% This test case involves P1G and P1H with the sys.config as %% specified in gg_config/1. The test case checks that the global %% group information is correct before and after the upgrade and also %% after terminating one of the nodes. The flow is as follows: %% 1. Start all four nodes of global group gg1 with P1G %% 2. Terminate one of the nodes, and upgrade the others to P1H. P1H %% config adds to more nodes to the global group. %% 3. Start the two remaining nodes with P1H upgrade_gg(Conf) -> [Gg1Sname,Gg2Sname,Gg3Sname,Gg4Sname,Gg5Sname,Gg6Sname] = ?config(snames,Conf), %% start gg1, gg3, gg4, gg5 and check that global group info is ok Nodes1 = [Gg1,Gg3,Gg4,Gg5] = start_nodes(Conf,[Gg1Sname,Gg3Sname,Gg4Sname,Gg5Sname],"upgrade_gg"), %% Give some time to synch nodes, then check global group info. timer:sleep(1000), [check_gg_info(Node,Nodes1,[],Nodes1--[Node]) || Node <- Nodes1], %% register a process on each of the nodes ok = rpc:call(Gg1, installer, reg_proc, [reg1]), ok = rpc:call(Gg3, installer, reg_proc, [reg3]), ok = rpc:call(Gg4, installer, reg_proc, [reg4]), ok = rpc:call(Gg5, installer, reg_proc, [reg5]), are_names_reg_gg(Gg1, [reg1, reg3, reg4, reg5]), %% Stop gg3, then upgrade gg1, gg4 and gg5 to P1H ok = stop_nodes([Gg3]), ok = install_release_changed_gg(Gg1,"P1H"), ok = install_release_changed_gg(Gg4,"P1H"), ok = install_release_changed_gg(Gg5,"P1H"), %% Check global group info Gg2 = node_name(Gg2Sname), Gg6 = node_name(Gg6Sname), Nodes2 = [Gg1,Gg4,Gg5], [check_gg_info(Node,Nodes2,[Gg2,Gg6],Nodes2--[Node]) || Node <- Nodes2], %% start gg2 and gg6 [Gg2,Gg6] = start_nodes(Conf,[Gg2Sname,Gg6Sname],"upgrade_gg start gg2/gg6"), %% reg proc on each of the nodes ok = rpc:call(Gg2, installer, reg_proc, [reg2]), ok = rpc:call(Gg6, installer, reg_proc, [reg6]), are_names_reg_gg(Gg1, [reg1, reg2, reg4, reg5, reg6]), %% Check global group info Nodes3 = [Gg1,Gg2,Gg4,Gg5,Gg6], [check_gg_info(Node,Nodes3,[],Nodes3--[Node]) || Node <- Nodes3], ok. upgrade_gg(cleanup,Config) -> Snames = ?config(snames,Config), NodeNames = [node_name(Sname) || Sname <- Snames], ok = stop_nodes(NodeNames). %%%----------------------------------------------------------------- %%% OTP-10463, Bug - release_handler could not handle regexp in appup %%% files. otp_10463_upgrade_script_regexp(_Config) -> %% Assuming that kernel always has a regexp in it's appup KernelVsn = vsn(kernel,current), {ok,KernelVsn,_} = release_handler:upgrade_script(kernel,code:lib_dir(kernel)), ok. %%%================================================================= %%% Misceleaneous functions %%%================================================================= stop_nodes(Nodes) -> ?t:format("Stopping nodes: ~p~n",[Nodes]), Running = lists:foldl(fun(Node,Acc) -> Now = now(), stop_cover(Node), case rpc:call(Node,installer,stop,[Now]) of {badrpc,nodedown} -> Acc; Other -> ?t:format("Stop ~p(~p): ~p~n", [Node,Now,Other]), [Node|Acc] end end, [], Nodes), wait_nodes_down(Running). wait_nodes_down(Nodes) -> ?t:format( "wait_nodes_down ~p:",[Nodes]), wait_nodes_down(Nodes, 30). wait_nodes_down(Nodes, 0) -> test_server:fail({error, {"could not kill nodes", Nodes}}); wait_nodes_down(Nodes, N) -> Fun = fun(Node, A) -> case net_adm:ping(Node) of pong -> ?t:format( " net_adm:ping(~p) = pong", [Node]), [Node|A]; pang -> ?t:format( " net_adm:ping(~p) = pang", [Node]), A end end, Pang = lists:foldl(Fun, [], Nodes), case Pang of [] -> ?t:format("",[]), ok; _ -> timer:sleep(1000), wait_nodes_down(Pang, N-1) end. wait_nodes_up(Nodes, Tag) -> wait_nodes_up(Nodes, Tag, []). wait_nodes_up(Nodes0, Tag, Apps) -> ?t:format("wait_nodes_up(~p, ~p, ~p):",[Nodes0, Tag, Apps]), Nodes = fix_nodes(Nodes0), wait_nodes_up(Nodes, Tag, lists:umerge(Apps,[kernel,stdlib,sasl]), 30). fix_nodes([{Node,InitPid}|Nodes]) -> [{Node,InitPid} | fix_nodes(Nodes)]; fix_nodes([Node|Nodes]) -> [{Node,fake_init_pid} | fix_nodes(Nodes)]; fix_nodes([]) -> []. wait_nodes_up(Nodes, Tag, Apps, 0) -> test_server:fail({error, {"nodes not started", Nodes, Tag, Apps}}); wait_nodes_up(Nodes, Tag, Apps, N) -> Fun = fun(NodeInfo={Node,OldInitPid}, A) -> case rpc:call(Node, application, which_applications, []) of {badrpc, nodedown} -> ?t:format( " ~p = {badarg, nodedown}",[Node]), [NodeInfo | A]; List when is_list(List)-> ?t:format( " ~p = [~p]",[Node, List]), case lists:all(fun(App) -> lists:keymember(App,1,List) end, Apps) of true -> case rpc:call(Node,erlang,whereis,[init]) of OldInitPid -> [NodeInfo | A]; _ -> start_cover(Node), A end; false -> [NodeInfo | A] end end end, Pang = lists:foldl(Fun,[],Nodes), case Pang of [] -> ?t:format("",[]), ok; _ -> timer:sleep(1000), wait_nodes_up(Pang, Tag, Apps, N-1) end. are_names_reg_gg(Node, Names) -> ?t:format( "are_names_reg_gg ~p~n",[Names]), are_names_reg_gg(Node, Names, 30). are_names_reg_gg(Node, Names, N) -> case lists:sort(rpc:call(Node, global, registered_names, [])) of Names -> ok; Regs when N > 0 -> timer:sleep(1000), ?t:format( "are_names_reg_gg Regs ~p~n",[Regs]), are_names_reg_gg(Node, Names, N-1); Regs -> ?t:fail({error, {"Names not registered", {{"should :", Names}, {"was :", Regs}}}}) end. t_start_node(Name, Boot, SysConfig) -> Args = case Boot of [] -> []; _ -> " -boot " ++ Boot end ++ case SysConfig of [] -> []; _ -> " -config " ++ SysConfig end, test_server:start_node(Name, slave, [{args, Args}]). stop_node(Node) -> ?t:stop_node(Node). copy_client(Conf,Master,Sname,Client) -> ?t:format("copy_client(Conf)"), DataDir = ?config(data_dir, Conf), MasterDir = filename:join(priv_dir(Conf),Master), {ClientArgs,RelCliDir} = rh_test_lib:get_client_args(Client,Sname,MasterDir, node_name(Master)), Cli = filename:join([MasterDir, RelCliDir]), ok = filelib:ensure_dir(filename:join([Cli,"bin","."])), ok = filelib:ensure_dir(filename:join([Cli,"releases","."])), ok = filelib:ensure_dir(filename:join([Cli,"log","."])), P1GOrig = filename:join([MasterDir, "releases", "P1G"]), ok = copy_tree(Conf,P1GOrig,filename:join(Cli,"releases")), case os:type() of {unix,_} -> ok = subst_file(filename:join([DataDir, "start_client"]), filename:join([Cli,"bin","start"]), [{"ROOT",MasterDir}, {"CLIENTARGS",ClientArgs}], [{chmod,8#0755}]); _ -> ok end, StartErlData = filename:join([MasterDir, "releases", "start_erl.data"]), CliRelDir = filename:join([Cli, "releases"]), copy_file(StartErlData, CliRelDir), RR = filename:join([MasterDir, "releases", "RELEASES"]), copy_file(RR, CliRelDir), ok. clean_priv_dir(Conf,Save) -> PrivDir = priv_dir(Conf), ?t:format("======== current dir ~p~n",[PrivDir]), Dirs = filelib:wildcard(filename:join(PrivDir,"*")), ?t:format("======== deleting ~p~n",[Dirs]), ok = rm_rf(Dirs,Save), Remaining = filelib:wildcard(filename:join(PrivDir,"*")), ?t:format("======== remaining ~p~n",[Remaining]), case Remaining of [] -> ok; _ -> rm_rf(Remaining,Save), Remaining2 = filelib:wildcard(filename:join(PrivDir,"*")), ?t:format("======== remaining after second try ~p~n",[Remaining2]) end, ok. rm_rf([File|Files],Save) -> case Save andalso filename:basename(File)=="save" of true -> rm_rf(Files,Save); false -> case file:read_link_info(File) of {ok,#file_info{type=directory}} -> MoreFiles = filelib:wildcard(filename:join(File,"*")), rm_rf(MoreFiles,Save), file:del_dir(File), rm_rf(Files,Save); {ok,#file_info{}} -> file:delete(File), rm_rf(Files,Save); Other -> ?t:format("======== could not delete file ~p~n" "read_link_info -> ~p~n",[File,Other]), rm_rf(Files,Save) end end; rm_rf([],_) -> ok. node_name(Sname) when is_atom(Sname) -> {ok,Host} = inet:gethostname(), list_to_atom(atom_to_list(Sname) ++ "@" ++ Host). copy_file(Src, Dest) -> copy_file(Src, Dest, []). copy_file(Src, Dest, Opts) -> case file:copy(Src,Dest) of {ok,_} -> preserve(Src,Dest,Opts), chmod(Dest,Opts), ok; {error,eisdir} -> NewDest = filename:join(Dest, filename:basename(Src)), case file:copy(Src,NewDest) of {ok,_} -> preserve(Src,NewDest,Opts), chmod(NewDest,Opts); {error,Reason} -> copy_error(Src,Dest,Reason) end; {error,Reason} -> copy_error(Src,Dest,Reason) end. preserve(Src,Dest,Opts) -> case lists:member(preserve, Opts) of true -> {ok, FileInfo} = file:read_file_info(Src), ok = file:write_file_info(Dest, FileInfo); false -> ok end. chmod(Dest,Opts) -> case lists:keyfind(chmod,1,Opts) of {chmod,Mode} -> ok = file:change_mode(Dest, Mode); false -> ok end. copy_error(Src, Dest, Reason) -> ?t:format("Copy ~s to ~s failed: ~s\n", [Src,Dest,file:format_error(Reason)]), ?t:fail(file_copy_failed). copy_tree(Conf, Src, DestDir) -> case catch copy_tree(Conf, Src, filename:basename(Src), DestDir) of ok -> ok; {'EXIT', {{badmatch,Error},_Stack}} -> %% Most probably, an erl_tar call has failed. %% Known to happen on some platforms (symbolic_link_too_long) Error; {'EXIT', Reason} -> {error, Reason} end. copy_tree(Conf, Src, NewName, DestDir) -> PrivDir = priv_dir(Conf), TempTarName = filename:join(PrivDir, "temp_tar_file.tar"), %% Not compressing tar file here since that would increase test %% suite time by almost 100%, and the tar file is deleted %% imediately anyway. {ok,Tar} = erl_tar:open(TempTarName, [write]), ok = erl_tar:add(Tar, Src, NewName, []), ok = erl_tar:close(Tar), ok = erl_tar:extract(TempTarName, [{cwd,DestDir}]), ok = file:delete(TempTarName), ok. %% subst_file(Src, Dest, Vars) %% Src = Dest = string(), filename and path %% Vars = [{Var, Val}] %% Var = Val = string() %% Substitute all occurrences of %Var% for Val in Src, using the list %% of variables in Vars. Result is written to Dest. %% subst_file(Src, Dest, Vars) -> subst_file(Src, Dest, Vars, []). subst_file(Src, Dest, Vars, Opts) -> {ok, Bin} = file:read_file(Src), Conts = binary_to_list(Bin), NConts = subst(Conts, Vars), ok = file:write_file(Dest, NConts), preserve(Src,Dest,Opts), chmod(Dest,Opts). subst(Str, Vars) -> subst(Str, Vars, []). subst([$%, C| Rest], Vars, Result) when $A =< C, C =< $Z -> subst_var([C| Rest], Vars, Result, []); subst([$%, C| Rest], Vars, Result) when $a =< C, C =< $z -> subst_var([C| Rest], Vars, Result, []); subst([$%, C| Rest], Vars, Result) when C == $_ -> subst_var([C| Rest], Vars, Result, []); subst([C| Rest], Vars, Result) -> subst(Rest, Vars, [C| Result]); subst([], _Vars, Result) -> lists:reverse(Result). subst_var([$%| Rest], Vars, Result, VarAcc) -> Key = lists:reverse(VarAcc), case lists:keysearch(Key, 1, Vars) of {value, {Key, Value}} -> subst(Rest, Vars, lists:reverse(Value, Result)); false -> subst(Rest, Vars, [$%| VarAcc ++ [$%| Result]]) end; subst_var([C| Rest], Vars, Result, VarAcc) -> subst_var(Rest, Vars, Result, [C| VarAcc]); subst_var([], Vars, Result, VarAcc) -> subst([], Vars, [VarAcc ++ [$%| Result]]). priv_dir(Conf) -> %% filename:absname(?config(priv_dir, Conf)). % Get rid of trailing slash %% Due to problem with long paths on windows => creating a new %% priv_dir under data_dir filename:absname(filename:join(?config(data_dir, Conf),priv_dir)). init_priv_dir(Conf) -> Dir = filename:absname(filename:join(?config(data_dir, Conf),priv_dir)), case filelib:is_dir(Dir) of true -> clean_priv_dir(Conf,false); false -> ok end, filelib:ensure_dir(filename:join(Dir,"*")). latest_version(Dir) -> List = filelib:wildcard(Dir ++ "*"), lists:last(lists:sort(List)). %% A printer process which receives messages from other nodes and %% prints in the log reg_print_proc() -> catch unregister(rh_print), Pid = spawn_link(?MODULE, rh_print, []), register(rh_print, Pid), ok. rh_print() -> receive {print, {Module,Line}, [H|T]} -> ?t:format("=== ~p:~p - ~p",[Module,Line,H]), lists:foreach(fun(Term) -> ?t:format(" ~p",[Term]) end, T), ?t:format("",[]), rh_print(); kill -> exit(normal) end. stop_print_proc() -> case whereis(rh_print) of %%removes the printer process undefined -> ok; Pid when is_pid(Pid) -> rh_print ! kill end. %% Create the first target release, vsn P1G. This release is used for %% all test cases in {group,release} create_p1g(Conf,TargetDir) -> DataDir = ?config(data_dir,Conf), PrivDir = priv_dir(Conf), ErtsDir = app_dir(erts,old), KernelDir = app_dir(kernel,old), StdlibDir = app_dir(stdlib,old), %% Fake earlier version of kernel and stdlib SystemLib = system_lib(PrivDir), ok = filelib:ensure_dir(filename:join(SystemLib,"*")), KernelLib = code:lib_dir(kernel), StdlibLib = code:lib_dir(stdlib), ok = copy_tree(Conf,KernelLib,KernelDir,SystemLib), ok = copy_tree(Conf,StdlibLib,StdlibDir,SystemLib), fix_version(SystemLib,kernel), fix_version(SystemLib,stdlib), %% Create dirs BinDir = filename:join(TargetDir,bin), ReleasesDir = filename:join(TargetDir,releases), LogDir = filename:join(TargetDir,log), ok = filelib:ensure_dir(filename:join(BinDir,"*")), ok = filelib:ensure_dir(filename:join(ReleasesDir,"*")), ok = filelib:ensure_dir(filename:join(LogDir,"*")), %% Copy stuff ErtsLatest = latest_version(filename:join(code:root_dir(),"erts")), ok = copy_tree(Conf, ErtsLatest, ErtsDir, TargetDir), ErtsBinDir = filename:join([TargetDir,ErtsDir,bin]), case os:type() of {unix, _} -> copy_file(filename:join([ErtsBinDir, "epmd"]), BinDir, [preserve]), copy_file(filename:join([ErtsBinDir, "run_erl"]), BinDir, [preserve]), copy_file(filename:join([ErtsBinDir, "to_erl"]), BinDir, [preserve]), %% Create the start_erl shell script ok = subst_file(filename:join([ErtsBinDir,"start_erl.src"]), filename:join([BinDir,"start_erl"]), [{"EMU","beam"}], [{chmod,8#0755}]); {win32,_} -> %% Add a batch file to use as HEART_COMMAND ok = copy_file(filename:join(DataDir, "heart_restart.bat"), ErtsBinDir,[preserve]) end, copy_file(filename:join(DataDir, "../installer.beam"), filename:join([DataDir,lib,"installer-1.0",ebin])), copy_file(filename:join(DataDir, "../rh_test_lib.beam"), filename:join([DataDir,lib,"installer-1.0",ebin])), %% Create .rel, .script and .boot files RelName = "rel0", RelVsn = "P1G", RelDir = filename:join(PrivDir,RelName), RelFileName = filename:join(RelDir,RelName), RelFile = RelFileName ++ ".rel", ok = filelib:ensure_dir(RelFile), TarFile = create_basic_release(Conf,RelFile,RelVsn,{old,false}), %% Extract tar file in target directory (i.e. same directory as erts etc.) ok = erl_tar:extract(TarFile, [{cwd, TargetDir}, compressed]), %% Create start_erl.data StartErlDataFile = filename:join([ReleasesDir, "start_erl.data"]), StartErlData = io_lib:fwrite("~s ~s~n", [vsn(erts,old), RelVsn]), ok = file:write_file(StartErlDataFile, StartErlData), %% Create RELEASES ok = release_handler:create_RELEASES(TargetDir,ReleasesDir,RelFile,[]), ok. fix_version(SystemLib,App) -> FromVsn = vsn(App,current), ToVsn = vsn(App,old), Rootname = filename:join([SystemLib,app_dir(App,old),ebin,atom_to_list(App)]), AppFile = Rootname ++ ".app", {ok,OrigApp} = file:read_file(AppFile), ok = file:write_file(AppFile,re:replace(OrigApp,FromVsn,ToVsn, [{return,binary}])), AppupFile = Rootname ++ ".appup", {ok,OrigAppup} = file:read_file(AppupFile), ok = file:write_file(AppupFile,re:replace(OrigAppup,FromVsn,ToVsn, [{return,binary}])). %% Create version P1H - which is P1G + a-1.0 %% Must have run create_p1g first!! create_p1h(Conf) -> create_upgrade_release(Conf,"rel1","P1H",{old,false},[{a,"1.0"}], [{a,[{key2,val2}]}],[{"rel0",[new_appl]}]). %% Create version P1I - which is P1H, but with application a upgraded to a-1.1 %% Must have run create_p1h first!! create_p1i(Conf) -> create_upgrade_release(Conf,"rel2","P1I",{old,false},[{a,"1.1"}], [{a,[{key2,newval2}]}], [{"rel1",[{extra,gott}]}]). %% Create version P2A - which is P1I, but with erts- %% Must have run create_p1i first!! create_p2a(Conf) -> create_upgrade_release(Conf,"rel3","P2A",{current,code:root_dir()}, [{a,"1.1"}],[{a,[{key2,newval2}]}], [{"rel1",[new_emu,new_appl]},{"rel2",[new_emu]}], [{"rel1",[old_emu,old_appl]},{"rel2",[old_emu]}]). %% Create version P2B - which is P2A, but with relup containing an %% extra reboot. %% Can be upgraded to from P1G - so must have run create_p1g first!! create_p2b(Conf) -> create_upgrade_release(Conf,"rel4","P2B",{current,code:root_dir()}, [{a,"1.1"}],[{a,[{key2,newval2}]}], [{"rel0",[new_emu,add_appl]}], [{"rel0",[old_emu,rm_appl]}], [restart_emulator]). %% Create a release tar package which can be installed on top of P1G create_upgrade_release(Conf,RelName,RelVsn,Erts,Apps,Config,UpFrom) -> create_upgrade_release(Conf,RelName,RelVsn,Erts,Apps,Config,UpFrom,[]). create_upgrade_release(Conf,RelName,RelVsn,Erts,Apps,Config,UpFrom,DownTo) -> create_upgrade_release(Conf,RelName,RelVsn,Erts,Apps,Config,UpFrom,DownTo,[]). create_upgrade_release(Conf,RelName,RelVsn,Erts,Apps,Config,UpFrom0,DownTo0,RelupOpts) -> PrivDir = priv_dir(Conf), RelDir = filename:join(PrivDir,RelName), RelFileName = filename:join(RelDir,RelName), RelFile = RelFileName ++ ".rel", ok = filelib:ensure_dir(RelFile), UpFrom = [{filename:join([PrivDir,UpFromName,UpFromName]),Descr} || {UpFromName,Descr} <- UpFrom0], DownTo = [{filename:join([PrivDir,DownToName,DownToName]),Descr} || {DownToName,Descr} <- DownTo0], create_basic_release(Conf,RelFile,RelVsn,Erts,Apps,Config, UpFrom,DownTo,RelupOpts), ok. %% Create .rel, .script, .boot, sys.config and tar create_basic_release(Conf,RelFile,RelVsn,{Erts,ErtsDir}) -> create_basic_release(Conf, RelFile,RelVsn,{Erts,ErtsDir},[],[],[],[],[]). create_basic_release(Conf,RelFile,RelVsn,{Erts,ErtsDir},ExtraApps,Config,UpFrom,DownTo,RelupOpts) -> DataDir = ?config(data_dir,Conf), PrivDir = priv_dir(Conf), SystemLib = system_lib(PrivDir), LibPath = [filename:join([SystemLib,"*",ebin]), filename:join([DataDir,lib,"*",ebin])], RelDir = filename:dirname(RelFile), RelFileName = filename:rootname(RelFile), %% Create .rel file create_installer_rel_file(RelFile,RelVsn,Erts,ExtraApps), %% Generate .script and .boot ok = systools:make_script(RelFileName, [{path,LibPath}, {outdir,RelDir}]), %% Generate relup ok = systools:make_relup(RelFileName,UpFrom,DownTo,[{path,LibPath}, {outdir,RelDir} | RelupOpts]), %% Create sys.config ok = write_term_file(filename:join(RelDir,"sys.config"),Config), %% Create tar file (i.e. collect all lib/app-*/* and system files) ok = systools:make_tar(RelFileName, [{path,LibPath}, {outdir,RelDir} | case ErtsDir of false -> []; _ -> [{erts,ErtsDir}] end]), TarFileName = RelFileName ++ ".tar.gz", case os:type() of {win32,_} when ErtsDir=/=false -> modify_tar_win32(Conf, TarFileName); _ -> ok end, TarFileName. %% Create a .rel file create_installer_rel_file(RelFile,RelVsn,Erts,ExtraApps) -> create_rel_file(RelFile,"SASL-test",RelVsn,Erts, [{installer,"1.0"}|ExtraApps]). create_rel_file(RelFile,RelName,RelVsn,Erts,ExtraApps) -> ErtsVsn = vsn(erts,Erts), KernelVsn = vsn(kernel,Erts), StdlibVsn = vsn(stdlib,Erts), SaslVsn = vsn(sasl,current), application:load(tools), ToolsVsn = vsn(tools,current), application:load(runtime_tools), RuntimeToolsVsn = vsn(runtime_tools,current), RelFileContent = {release, {RelName, RelVsn}, {erts, ErtsVsn}, [{kernel, KernelVsn}, {stdlib, StdlibVsn}, {sasl, SaslVsn}, {runtime_tools, RuntimeToolsVsn}, {tools, ToolsVsn} | ExtraApps]}, ok = write_term_file(RelFile,RelFileContent). %% Insert a term in a file, which can be read with file:consult/1. write_term_file(File,Term) -> ok = file:write_file(File,io_lib:format("~p.~n",[Term])). %% Check that global group info is correct check_gg_info(Node,OtherAlive,OtherDead,Synced) -> GGI = rpc:call(Node, global_group, info, []), GI = rpc:call(Node, global, info,[]), try do_check_gg_info(OtherAlive,OtherDead,Synced,GGI,GI) catch _:E -> ?t:format("~ncheck_gg_info failed for ~p: ~p~nwhen GGI was: ~p~n" "and GI was: ~p~n", [Node,E,GGI,GI]), ?t:fail("check_gg_info failed") end. do_check_gg_info(OtherAlive,OtherDead,Synced,GGI,GI) -> {_,gg1} = lists:keyfind(own_group_name,1,GGI), {_,synced} = lists:keyfind(state,1,GGI), {_,AllNodes} = lists:keyfind(own_group_nodes,1,GGI), true = lists:sort(AllNodes) =:= lists:sort(OtherAlive++OtherDead), {_,[]} = lists:keyfind(sync_error,1,GGI), {_,[{gg2,[_,_]}]} = lists:keyfind(other_groups,1,GGI), %% There is a known bug in global_group (OTP-9177) which causes %% the following to fail every now and then: %% {_,SyncedNodes} = lists:keyfind(synced_nodes,1,GGI), %% true = lists:sort(SyncedNodes) =:= lists:sort(Synced), %% {_,NoContact} = lists:keyfind(no_contact,1,GGI), %% true = lists:sort(NoContact) =:= lists:sort(OtherDead), %% Therefore we use global:info instead for this part {state,_,_,SyncedNodes,_,_,_,_,_,_,_} = GI, true = lists:sort(SyncedNodes) =:= lists:sort(Synced), %% .. and we only check that all OtherDead are listed as %% no_contact (due to th bug there might be more nodes in this %% list) {_,NoContact} = lists:keyfind(no_contact,1,GGI), true = lists:sort(OtherDead) =:= lists:sort([NC || NC <- NoContact,lists:member(NC,OtherDead)]), ok. %% Return the configuration (to be inserted in sys.config) for global group tests gg_config(Snames) -> Nodes = [node_name(Sname) || Sname <- Snames], [{kernel, [{sync_nodes_optional, Nodes}, {sync_nodes_timeout, 10000}, {global_groups, [{gg1, Nodes}, {gg2, [node_name(Sname) || Sname <- [ggq,ggw]]}]}]}, {a, [{key2, val2}]}]. %% Start a node with short name SnameStr, and unpack P1H unpack_p1h(Conf,Sname) -> PrivDir = priv_dir(Conf), [Node] = start_nodes(Conf,[Sname],"create_p1h"), ok = rpc_inst(Node, unpack_p1h, [PrivDir]), Node. %% On the given node, install P1H and make it permanent %% This function is to be called after unpack_p1h/2, with the same node. permanent_p1h(Node) -> ok = rpc_inst(Node, permanent_p1h, []). %% For each node in ToNodes, create a target installation which is %% indentical to the target installation for FromNode. copy_installed(Conf,FromNode,ToNodes) -> PrivDir = priv_dir(Conf), DataDir = ?config(data_dir,Conf), %% Instead of using copy_tree on the complete node directory, I'm %% splitting this in separate tar files per subdirectory so the %% log directory can be completely skipped. The reason for this is %% that the tar file might become faulty if the node is alive and %% writing to the log while the tar is created. FromDir = filename:join(PrivDir,FromNode), {ok,FromDirNames} = file:list_dir(FromDir), TempTarFiles = [begin TempTarFile = filename:join(PrivDir,"temp_" ++ FDN ++ ".tar"), {ok,Tar} = erl_tar:open(TempTarFile,[write]), ok = erl_tar:add(Tar,filename:join(FromDir,FDN),FDN,[]), ok = erl_tar:close(Tar), TempTarFile end || FDN <- FromDirNames, FDN=/="log"], lists:foreach( fun(Node) -> NodeDir = filename:join(PrivDir,Node), ok = filelib:ensure_dir(filename:join([NodeDir,"log","*"])), lists:foreach( fun(TempTarFile) -> ok = erl_tar:extract(TempTarFile,[{cwd,NodeDir}]) end, TempTarFiles), case os:type() of {unix,_} -> %% Create start script %% Using a customized start script from DataDir %% where some options (heart and nodename) are %% added compared to the start.src in the erlang %% distribution. ok = subst_file(filename:join(DataDir, "start"), filename:join([NodeDir, "bin", "start"]), [{"ROOT",NodeDir}], [preserve]); {win32,_} -> %% Write erl.ini ErtsDirs = filelib:wildcard(filename:join(NodeDir,"erts-*")), lists:foreach( fun(ErtsDir) -> ok = subst_file( filename:join(DataDir, "erl.ini.src"), filename:join([ErtsDir, "bin", "erl.ini"]), [{"ROOTDIR",NodeDir}, {"BINDIR",filename:join(ErtsDir,"bin")}]) end, ErtsDirs), %% The service on windows runs as local %% administrator (not otptest user), so we need %% to chmod the release in order to allow the %% executing node to install releases, write %% logs etc. chmod_release_win32(NodeDir) end end, ToNodes), lists:foreach(fun(TempTarFile) -> file:delete(TempTarFile) end, TempTarFiles), ok. chmod_release_win32(Dir) -> os:cmd("echo y|cacls " ++ Dir ++ " /T /E /G Administrators:F"). start_nodes(Conf,Snames,Tag) -> PrivDir = priv_dir(Conf), Nodes = lists:map( fun(Sname) -> NodeDir = filename:join(PrivDir,Sname), Node = node_name(Sname), case os:type() of {unix,_} -> start_node_unix(Sname,NodeDir); {win32,_} -> start_node_win32(Sname,NodeDir) end, Node end, Snames), wait_nodes_up(Nodes,Tag), Nodes. start_node_unix(Sname,NodeDir) -> Script = filename:join([NodeDir,"bin","start"]), Cmd = "env NODENAME="++atom_to_list(Sname) ++ " " ++ Script, %% {ok,StartFile} = file:read_file(Cmd), %% ?t:format("~s:\n~s~n~n",[Start,binary_to_list(StartFile)]), Res = os:cmd(Cmd), ?t:format("Start ~p: ~p~n=>\t~p~n", [Sname,Cmd,Res]). start_node_win32(Sname,NodeDir) -> Name = atom_to_list(Sname) ++ "_P1G", ErtsBinDir = filename:join([NodeDir,app_dir(erts,old),"bin"]), StartErlArgs = rh_test_lib:get_start_erl_args(NodeDir), ServiceArgs = rh_test_lib:get_service_args(NodeDir, Sname, StartErlArgs), Erlsrv = filename:nativename(filename:join(ErtsBinDir,"erlsrv")), rh_test_lib:erlsrv(Erlsrv,stop,Name), rh_test_lib:erlsrv(Erlsrv,remove,Name), ok = rh_test_lib:erlsrv(Erlsrv,add,Name,ServiceArgs), ok = rh_test_lib:erlsrv(Erlsrv,start,Name), ok. %% Create a unique node name for each test case tc_sname(Config) -> tc_sname(Config,""). tc_sname(Config,Fix) when is_atom(Fix) -> tc_sname(Config,atom_to_list(Fix)); tc_sname(Config,Fix) when is_list(Fix) -> list_to_atom( atom_to_list(?MODULE) ++ "-" ++ atom_to_list(?config(sname_prefix, Config)) ++ case Fix of "" -> ""; _ -> "-" ++ Fix end). tc_full_node_name(Config) -> tc_full_node_name(Config,""). tc_full_node_name(Config,Fix) -> node_name(tc_sname(Config,Fix)). %% When installing a release for which the sys.config includes added %% or changed global group(s), this node (test_sever@host) will be %% disconnected from the test node (Node) by global_group.erl. This %% will cause the rpc:call to terminate with {badrpc,nodedown} even if %% the installation succeeds. This function installs the release, %% accepts the faulty return value and then checks if the release was %% successfully installed. install_release_changed_gg(Node,RelVsn) -> stop_cover(Node), {badrpc,nodedown} = rpc:call(Node,release_handler,install_release,[RelVsn]), timer:sleep(100), wait_installed(Node,RelVsn,4). wait_installed(Node,RelVsn,0) -> ?t:fail("install_release_changed_gg failed for " ++ RelVsn ++ " on " ++ atom_to_list(Node)); wait_installed(Node,RelVsn,N) -> Rels = rpc:call(Node,release_handler,which_releases,[]), case lists:keyfind(RelVsn, 2, Rels) of {"SASL-test", RelVsn, _Libs, current} -> start_cover(Node), ok; _ -> timer:sleep(500), wait_installed(Node,RelVsn,N-1) end. %% Start/stop cover measurements on the given node start_cover(Node) -> cover_fun(Node,start). stop_cover(Node) -> cover_fun(Node,stop). cover_fun(Node,Func) -> case ?t:is_cover() of true -> cover:Func(Node); false -> ok end. %%%----------------------------------------------------------------- %%% Create a fake release .... %% This function will create and install a release build on the %% current running OTP release. It includes kernel, stdlib and sasl, %% and possibly other applications if they are listed in AppDirs = %% [{App,Vsn,LibDir}] create_and_install_fake_first_release(Dir,AppDirs) -> %% Create the first release {RelName,RelVsn} = init:script_id(), {Rel,_} = create_fake_release(Dir,RelName,RelVsn,AppDirs), ReleasesDir = filename:join(Dir, "releases"), RelDir = filename:dirname(Rel), %% And install it RelVsnDir = filename:join(ReleasesDir, RelVsn), ok = filelib:ensure_dir(filename:join(RelVsnDir,"*")), ok = copy_file(Rel++".rel",RelVsnDir), ok = copy_file(Rel++".boot",filename:join(RelVsnDir, "start.boot")), ok = copy_file(filename:join(RelDir,"sys.config"),RelVsnDir), ok = release_handler:create_RELEASES(code:root_dir(), ReleasesDir, Rel++".rel", AppDirs), Rel. %% This function create a new release, including a relup file. It can %% be upgraded to from the release created by %% create_and_install_fake_first_release/2. Unpack first by calls to %% release_handler:set_unpacked and release_handler:install_file. create_fake_upgrade_release(Dir,RelVsn,AppDirs,{UpFrom,DownTo,ExtraLibs}) -> %% Create a new release {RelName,_} = init:script_id(), {Rel,Paths} = create_fake_release(Dir,RelName,RelVsn,AppDirs), RelDir = filename:dirname(Rel), %% And a relup file so it can be upgraded to RelupPath = Paths ++ [filename:join([Lib,"*","ebin"]) || Lib <- ExtraLibs], ok = systools:make_relup(Rel,UpFrom,DownTo,[{path,RelupPath}, {outdir,RelDir}]), Rel. create_fake_release(Dir,RelName,RelVsn,AppDirs) -> %% Create .rel files RelDir = filename:join(Dir,"rel_" ++ RelVsn), Rel = filename:join([RelDir,"rel_" ++ RelVsn]), ok = filelib:ensure_dir(Rel), {Apps,Paths} = lists:foldl(fun({App,Vsn,Lib},{As,Ps}) -> {[{App,Vsn}|As], lists:umerge([filename:join([Lib,"*",ebin])],Ps)} end, {[],[]}, AppDirs), create_rel_file(Rel++".rel",RelName,RelVsn,current,Apps), %% Generate boot scripts ok = systools:make_script(Rel,[local, {path, Paths}, {outdir,RelDir}]), ok = copy_file(Rel++".boot", filename:join(RelDir,"start.boot")), %% Use an own 'releases' directory - we don't want to change the %% contents of $OTP_ROOT/releases %% Inform SASL about this via sys.config ReleasesDir = filename:join(Dir, "releases"), Config = [{sasl,[{releases_dir,ReleasesDir}]}], ok = write_term_file(filename:join(RelDir,"sys.config"), Config), {Rel,Paths}. rpc_inst(Node,Func,Args) -> rpc:call(Node,installer,Func,[node()|Args]). delete_all_services() -> ErlSrv = erlsrv:erlsrv(erlang:system_info(version)), [_|Serviceinfo] = string:tokens(os:cmd(ErlSrv ++ " list"),"\n"), Services = [lists:takewhile(fun($\t) -> false; (_) -> true end,S) || S <- Serviceinfo], ?t:format("Services to remove: ~p~n",[Services]), lists:foreach(fun(S) -> rh_test_lib:erlsrv(ErlSrv,stop,S), rh_test_lib:erlsrv(ErlSrv,remove,S) end, Services). modify_tar_win32(Conf, TarFileName) -> DataDir = ?config(data_dir,Conf), PrivDir = priv_dir(Conf), TmpDir = filename:join(PrivDir,"tmp_modify_tar_win32"), ok = erl_tar:extract(TarFileName,[{cwd,TmpDir},compressed]), ErtsBinDir = filelib:wildcard(filename:join([TmpDir,"erts-*","bin"])), ok = copy_file(filename:join(DataDir, "heart_restart.bat"), ErtsBinDir,[preserve]), {ok,Fs} = file:list_dir(TmpDir), {ok,T} = erl_tar:open(TarFileName,[write,compressed]), [ok = erl_tar:add(T,filename:join(TmpDir,F),F,[]) || F <- Fs], ok = erl_tar:close(T), ok. app_dir(App,Vsn) -> atom_to_list(App) ++ "-" ++ vsn(App,Vsn). vsn(erts,old) -> ?ertsvsn; vsn(kernel,old) -> ?kernelvsn; vsn(stdlib,old) -> ?stdlibvsn; vsn(erts,current) -> erlang:system_info(version); vsn(App,current) -> {ok,Vsn} = application:get_key(App,vsn), Vsn. system_lib(PrivDir) -> filename:join(PrivDir,"system_lib").