OTP-SNMPEA-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Integer32, IpAddress
        FROM SNMPv2-SMI
    DisplayString, RowStatus, StorageType
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    otpModules, otpApplications
        FROM OTP-REG
    ;

otpSnmpeaModule MODULE-IDENTITY
    LAST-UPDATED  "0305130000Z"
    ORGANIZATION  "Ericsson"
    CONTACT-INFO
        "Contact:  Erlang Support see license agreement for Erlang/OTP."
    DESCRIPTION
        "This MIB module defines MIB objects for the SNMPEA
        component in OTP."

    REVISION    "0305130000Z"
    DESCRIPTION
        "Changed CONTACT-INFO as it was outdated, made it more generic
	to avoid such changes in the future."

    REVISION    "9808280000Z"
    DESCRIPTION
        "Since there are standard MIBs in the SNMPv3 framework that
        implements the functionality defined in this MIB, all objects in
        this MIB is now obsolete.  There are still a few OID assignments
        defined in this MIB.

        Removed intCommunityTable; replaced by snmpCommunityTable in
        SNMP-COMMUNITY-MIB.

        Removed intAddressTable; replaced by SNMP-TARGET-MIB.

	Removed intAgentMaxPacketSize, replaced by snmpEngineMaxPacketSize
        in SNMP-FRAMEWORK-MIB.

        Removed intAgentIpAddress and intAgentUDPPort.

        Removed intViewTable, replaced by SNMP-VIEW-BASED-ACM-MIB."

    REVISION    "9804160000Z"
    DESCRIPTION
        "Updated to support MIBs from SNMPv3.  Since SNMPv3 standardizes
        some of the functionality provided by this MIB, we're using the
        standard instead.

        Removed intTrapDestTable; replaced by SNMP-TARGET-MIB and
	SNMP-NOTIFICATION-MIB."

    REVISION    "9709220900Z"
    DESCRIPTION
        "The initial version of this MIB module.  It is the old
        INTERNAL-MIB renamed."
    ::= { otpModules 5 }

otpSnmpeaMIB    OBJECT IDENTIFIER ::= { otpApplications 3 }
otpSnmpeaMIBConformance
                OBJECT IDENTIFIER ::= { otpSnmpeaMIB 1 }
otpSnmpeaMIBObjects
                OBJECT IDENTIFIER ::= { otpSnmpeaMIB 2 }

snmpeaAdm       OBJECT IDENTIFIER ::= { otpSnmpeaMIBObjects 1}
community       OBJECT IDENTIFIER ::= { snmpeaAdm 1 }
trap            OBJECT IDENTIFIER ::= { snmpeaAdm 2 }
view            OBJECT IDENTIFIER ::= { snmpeaAdm 3 }


-- Obsolete objects

-- The Administration Group
--
-- This group consists of objects to configure the access for
-- managers to the MIB tree.
--
-- These objects were previously defined in INTERNAL-MIB

intCommunityTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IntCommunityEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "This table defines access for the different
        communities.

        When a request comes from a certain ip address,
        referring to a community string, the mib view
        and access corresponding to these are looked up
        in this table. Then the operation is validatated against
        the access, and all requested objects validated against
        the mib view."
    ::= { community 1 }

intCommunityEntry OBJECT-TYPE
    SYNTAX      IntCommunityEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        ""
    INDEX   { intCommunityDestination, intCommunityString }
    ::= { intCommunityTable 1 }

IntCommunityEntry ::=
    SEQUENCE {
      intCommunityDestination   IpAddress,
      intCommunityString        DisplayString,
      intCommunityViewIndex     Integer32,
      intCommunityAccess        INTEGER,
      intCommunityStatus        RowStatus
    }

intCommunityDestination OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The ip address of a management station. The special
        ip address {0.0.0.0} is a wildcard, meaning all possible
        ip addresses. In this way, access can be granted to all
        ip addressed for some communities."
    ::= { intCommunityEntry 1 }

intCommunityString OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The community string, defining the community."
    ::= { intCommunityEntry 2 }

intCommunityViewIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "Identifies a mib view.  Index into the
        intViewTable."
    ::= { intCommunityEntry 3 }

intCommunityAccess OBJECT-TYPE
    SYNTAX      INTEGER { read(1), readWrite(2) }
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "Defines which operations the manager can perform
        on the objects in the mib view."
    ::= { intCommunityEntry 4 }

intCommunityStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The status of this conceptual row in the
        intCommunityTable."
    ::= { intCommunityEntry 5 }

intAgentIpAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The IP address of this agent."
    ::= { community 2 }

intAgentUDPPort OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The UDP port the agent listens to."
    ::= { community 3 }

intAgentMaxPacketSize OBJECT-TYPE
    SYNTAX      Integer32 (484..65535)
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The maximum packet size in bytes this agent will send to a
        manager."
    ::= { community 4 }


intAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IntAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "This table holds UDP related information on each known
        management station."
    ::= { community 5 }


intAddressEntry OBJECT-TYPE
    SYNTAX      IntAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        ""
    INDEX   { intAddressDestination }
    ::= { intAddressTable 1 }

IntAddressEntry ::=
    SEQUENCE {
      intAddressDestination     IpAddress,
      intAddressUDPPort         Integer32,
      intAddressMaxPacketSize   Integer32 (484..65535),
      intAddressStatus          RowStatus
    }

intAddressDestination OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The ip address of the management station."
    ::= { intAddressEntry 1 }

intAddressUDPPort OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The UDP port to which traps will be sent to
        this destination."
    DEFVAL { 162 }
    ::= { intAddressEntry 2 }

intAddressMaxPacketSize OBJECT-TYPE
    SYNTAX      Integer32 (484..65535)
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The maximum packet size in bytes for Messages
        sent to this destination.  The max size of a packet
        sent to this destination will be the minumim of
        this variable and agentMaxPacketSize.0."
    ::= { intAddressEntry 3 }

intAddressStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The status of this conceptual row in the
        intAddressTable."
    ::= { intAddressEntry 4 }

intTrapDestTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IntTrapDestEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The intTrapDestTable defines to which destination all traps
        for a specific community should be sent."
    ::= { trap 1 }

intTrapDestEntry OBJECT-TYPE
    SYNTAX      IntTrapDestEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        ""
    INDEX   { intTrapDestCommunityString, intTrapDestDestination }
    ::= { intTrapDestTable 1 }

IntTrapDestEntry ::=
    SEQUENCE {
      intTrapDestCommunityString    DisplayString,
      intTrapDestDestination        IpAddress,
      intTrapDestStatus             RowStatus,
      intTrapDestSnmpVersion        INTEGER
    }

intTrapDestCommunityString OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        ""
    ::= { intTrapDestEntry 1 }

intTrapDestDestination OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        ""
    ::= { intTrapDestEntry 2 }

intTrapDestStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The status of this conceptual row in the
        intTrapDestTable."
    ::= { intTrapDestEntry 3 }

intTrapDestSnmpVersion OBJECT-TYPE
    SYNTAX      INTEGER { v1(1), v2(2) }
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The SNMP version of the manager.  If it is v1,
        SNMPv1Traps are sent.  If it is v2, SNMPv2Traps are sent"
    ::= { intTrapDestEntry 4 }

intViewTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IntViewEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Locally held information about the MIB views
        known to this agent.

        Each MIB view is defined by two
        collections of view subtrees: the included view
        subtrees, and the excluded view subtrees.  Every
        such subtree, both included and excluded, is
        defined in this table.

        To determine if a particular object instance is in
        a particular MIB view, compare the object
        instance's OBJECT IDENTIFIER with each of the MIB
        view's entries in this table.  If none match, then
        the object instance is not in the MIB view.  If
        one or more match, then the object instance is
        included in, or excluded from, the MIB view
        according to the value of viewType in the entry
        whose value of viewSubtree has the most sub-
        identifiers.  If multiple entries match and have
        the same number of sub-identifiers, then the
        lexicographically greatest instance of viewType
        determines the inclusion or exclusion.

        An object instance's OBJECT IDENTIFIER X matches
        an entry in this table when the number of sub-
        identifiers in X is at least as many as in the
        value of viewSubtree for the entry, and each sub-
        identifier in the value of viewSubtree matches its
        corresponding sub-identifier in X.  Two sub-
        identifiers match either if the corresponding bit
        of viewMask is zero (the 'wild card' value), or if
        they are equal.

        Due to this 'wild card' capability, we introduce
        the term, a 'family' of view subtrees, to refer to
        the set of subtrees defined by a particular
        combination of values of viewSubtree and viewMask.
        In the case where no 'wild card' is defined in
        viewMask, the family of view subtrees reduces to a
        single view subtree."
    ::= { view 1 }

intViewEntry OBJECT-TYPE
    SYNTAX      IntViewEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Information on a particular family of view
        subtrees included in or excluded from a particular
        MIB view.

        Implementations must not restrict the number of
        families of view subtrees for a given MIB view,
        except as dictated by resource constraints on the
        overall number of entries in the viewTable."
    INDEX   { intViewIndex, intViewSubtree }
    ::= { intViewTable 1 }

IntViewEntry ::=
    SEQUENCE {
      intViewIndex          Integer32,
      intViewSubtree        OBJECT IDENTIFIER,
      intViewMask           OCTET STRING,
      intViewType           INTEGER,
      intViewStorageType    StorageType,
      intViewStatus         RowStatus
    }


intViewIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A unique value for each MIB view.  The value for
        each MIB view must remain constant at least from
        one re-initialization of the entity's network
        management system to the next re-initialization."
    ::= { intViewEntry 1 }

intViewSubtree OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A MIB subtree."
    ::= { intViewEntry 2 }

intViewMask OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..16))
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The bit mask which, in combination with the
        corresponding instance of viewSubtree, defines a
        family of view subtrees.

        Each bit of this bit mask corresponds to a sub-
        identifier of viewSubtree, with the most
        significant bit of the i-th octet of this octet
        string value (extended if necessary, see below)
        corresponding to the (8*i - 7)-th sub-identifier,
        and the least significant bit of the i-th octet of
        this octet string corresponding to the (8*i)-th
        sub-identifier, where i is in the range 1 through
        16.

        Each bit of this bit mask specifies whether or not
        the corresponding sub-identifiers must match when
        determining if an OBJECT IDENTIFIER is in this
        family of view subtrees; a '1' indicates that an
        exact match must occur; a '0' indicates 'wild
        card', i.e., any sub-identifier value matches.


        Thus, the OBJECT IDENTIFIER X of an object
        instance is contained in a family of view subtrees
        if the following criteria are met:

               for each sub-identifier of the value of
               viewSubtree, either:

                the i-th bit of viewMask is 0, or

                the i-th sub-identifier of X is equal to
                the i-th sub-identifier of the value of
                viewSubtree.

        If the value of this bit mask is M bits long and
        there are more than M sub-identifiers in the
        corresponding instance of viewSubtree, then the
        bit mask is extended with 1's to be the required
        length.

        Note that when the value of this object is the
        zero-length string, this extension rule results in
        a mask of all-1's being used (i.e., no 'wild
        card'), and the family of view subtrees is the one
        view subtree uniquely identified by the
        corresponding instance of viewSubtree."
    DEFVAL      { ''H }
    ::= { intViewEntry 3 }


intViewType OBJECT-TYPE
    SYNTAX      INTEGER {
        included(1),
        excluded(2)
        }
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The status of a particular family of view
        subtrees within the particular
        MIB view.  The value 'included(1)' indicates that
        the corresponding instances of viewSubtree and
        viewMask define a family of view subtrees included
        in the MIB view.  The  value 'excluded(2)'
        indicates that the corresponding instances of
        viewSubtree and viewMask define a family of view
        subtrees excluded from the MIB view."
    DEFVAL      { included }
    ::= { intViewEntry 4 }

intViewStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The storage type for this conceptual row in the
        intViewTable."
    DEFVAL      { nonVolatile }
    ::= { intViewEntry 5 }

intViewStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The status of this conceptual row in the
        intViewTable."
    ::= { intViewEntry 6 }

-- conformance information

otpSnmpeaMIBCompliances
                OBJECT IDENTIFIER ::= { otpSnmpeaMIBConformance 1 }
otpSnmpeaMIBGroups
                OBJECT IDENTIFIER ::= { otpSnmpeaMIBConformance 2 }


-- compliance statements

otpSnmpeaBasicCompliance MODULE-COMPLIANCE
    STATUS  obsolete
    DESCRIPTION
        "The compliance statement for SNMPv2 entities which
        implement the OTP-SNMPEA-MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { addressGroup }
    ::= { otpSnmpeaMIBCompliances 1 }


-- units of conformance

communityGroup OBJECT-GROUP
    OBJECTS { intCommunityViewIndex,
              intCommunityAccess,
              intCommunityStatus }
    STATUS  obsolete
    DESCRIPTION
        "A collection of objects providing basic instrumentation
        of the load of the OTP system."
    ::= { otpSnmpeaMIBGroups 1 }

addressGroup OBJECT-GROUP
    OBJECTS { intAgentIpAddress,
              intAgentUDPPort,
              intAgentMaxPacketSize,
              intAddressUDPPort,
              intAddressMaxPacketSize,
              intAddressStatus }
    STATUS  obsolete
    DESCRIPTION
        "A collection of objects providing basic instrumentation
        of the load of the OTP system."
    ::= { otpSnmpeaMIBGroups 2 }

trapGroup OBJECT-GROUP
    OBJECTS { intTrapDestStatus,
              intTrapDestSnmpVersion }
    STATUS  obsolete
    DESCRIPTION
        "A collection of objects providing basic instrumentation
        of the load of the OTP system."
    ::= { otpSnmpeaMIBGroups 3 }

viewGroup OBJECT-GROUP
    OBJECTS { intViewMask,
              intViewType,
              intViewStorageType,
              intViewStatus }
    STATUS  obsolete
    DESCRIPTION
        "A collection of objects providing basic instrumentation
        of the load of the OTP system."
    ::= { otpSnmpeaMIBGroups 4 }


END