OTP-SNMPEA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress FROM SNMPv2-SMI DisplayString, RowStatus, StorageType FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF otpModules, otpApplications FROM OTP-REG ; otpSnmpeaModule MODULE-IDENTITY LAST-UPDATED "0305130000Z" ORGANIZATION "Ericsson" CONTACT-INFO "Contact: Erlang Support see license agreement for Erlang/OTP." DESCRIPTION "This MIB module defines MIB objects for the SNMPEA component in OTP." REVISION "0305130000Z" DESCRIPTION "Changed CONTACT-INFO as it was outdated, made it more generic to avoid such changes in the future." REVISION "9808280000Z" DESCRIPTION "Since there are standard MIBs in the SNMPv3 framework that implements the functionality defined in this MIB, all objects in this MIB is now obsolete. There are still a few OID assignments defined in this MIB. Removed intCommunityTable; replaced by snmpCommunityTable in SNMP-COMMUNITY-MIB. Removed intAddressTable; replaced by SNMP-TARGET-MIB. Removed intAgentMaxPacketSize, replaced by snmpEngineMaxPacketSize in SNMP-FRAMEWORK-MIB. Removed intAgentIpAddress and intAgentUDPPort. Removed intViewTable, replaced by SNMP-VIEW-BASED-ACM-MIB." REVISION "9804160000Z" DESCRIPTION "Updated to support MIBs from SNMPv3. Since SNMPv3 standardizes some of the functionality provided by this MIB, we're using the standard instead. Removed intTrapDestTable; replaced by SNMP-TARGET-MIB and SNMP-NOTIFICATION-MIB." REVISION "9709220900Z" DESCRIPTION "The initial version of this MIB module. It is the old INTERNAL-MIB renamed." ::= { otpModules 5 } otpSnmpeaMIB OBJECT IDENTIFIER ::= { otpApplications 3 } otpSnmpeaMIBConformance OBJECT IDENTIFIER ::= { otpSnmpeaMIB 1 } otpSnmpeaMIBObjects OBJECT IDENTIFIER ::= { otpSnmpeaMIB 2 } snmpeaAdm OBJECT IDENTIFIER ::= { otpSnmpeaMIBObjects 1} community OBJECT IDENTIFIER ::= { snmpeaAdm 1 } trap OBJECT IDENTIFIER ::= { snmpeaAdm 2 } view OBJECT IDENTIFIER ::= { snmpeaAdm 3 } -- Obsolete objects -- The Administration Group -- -- This group consists of objects to configure the access for -- managers to the MIB tree. -- -- These objects were previously defined in INTERNAL-MIB intCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF IntCommunityEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This table defines access for the different communities. When a request comes from a certain ip address, referring to a community string, the mib view and access corresponding to these are looked up in this table. Then the operation is validatated against the access, and all requested objects validated against the mib view." ::= { community 1 } intCommunityEntry OBJECT-TYPE SYNTAX IntCommunityEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" INDEX { intCommunityDestination, intCommunityString } ::= { intCommunityTable 1 } IntCommunityEntry ::= SEQUENCE { intCommunityDestination IpAddress, intCommunityString DisplayString, intCommunityViewIndex Integer32, intCommunityAccess INTEGER, intCommunityStatus RowStatus } intCommunityDestination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The ip address of a management station. The special ip address {0.0.0.0} is a wildcard, meaning all possible ip addresses. In this way, access can be granted to all ip addressed for some communities." ::= { intCommunityEntry 1 } intCommunityString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The community string, defining the community." ::= { intCommunityEntry 2 } intCommunityViewIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Identifies a mib view. Index into the intViewTable." ::= { intCommunityEntry 3 } intCommunityAccess OBJECT-TYPE SYNTAX INTEGER { read(1), readWrite(2) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Defines which operations the manager can perform on the objects in the mib view." ::= { intCommunityEntry 4 } intCommunityStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The status of this conceptual row in the intCommunityTable." ::= { intCommunityEntry 5 } intAgentIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The IP address of this agent." ::= { community 2 } intAgentUDPPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The UDP port the agent listens to." ::= { community 3 } intAgentMaxPacketSize OBJECT-TYPE SYNTAX Integer32 (484..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The maximum packet size in bytes this agent will send to a manager." ::= { community 4 } intAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF IntAddressEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "This table holds UDP related information on each known management station." ::= { community 5 } intAddressEntry OBJECT-TYPE SYNTAX IntAddressEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" INDEX { intAddressDestination } ::= { intAddressTable 1 } IntAddressEntry ::= SEQUENCE { intAddressDestination IpAddress, intAddressUDPPort Integer32, intAddressMaxPacketSize Integer32 (484..65535), intAddressStatus RowStatus } intAddressDestination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The ip address of the management station." ::= { intAddressEntry 1 } intAddressUDPPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The UDP port to which traps will be sent to this destination." DEFVAL { 162 } ::= { intAddressEntry 2 } intAddressMaxPacketSize OBJECT-TYPE SYNTAX Integer32 (484..65535) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The maximum packet size in bytes for Messages sent to this destination. The max size of a packet sent to this destination will be the minumim of this variable and agentMaxPacketSize.0." ::= { intAddressEntry 3 } intAddressStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The status of this conceptual row in the intAddressTable." ::= { intAddressEntry 4 } intTrapDestTable OBJECT-TYPE SYNTAX SEQUENCE OF IntTrapDestEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The intTrapDestTable defines to which destination all traps for a specific community should be sent." ::= { trap 1 } intTrapDestEntry OBJECT-TYPE SYNTAX IntTrapDestEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" INDEX { intTrapDestCommunityString, intTrapDestDestination } ::= { intTrapDestTable 1 } IntTrapDestEntry ::= SEQUENCE { intTrapDestCommunityString DisplayString, intTrapDestDestination IpAddress, intTrapDestStatus RowStatus, intTrapDestSnmpVersion INTEGER } intTrapDestCommunityString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" ::= { intTrapDestEntry 1 } intTrapDestDestination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "" ::= { intTrapDestEntry 2 } intTrapDestStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The status of this conceptual row in the intTrapDestTable." ::= { intTrapDestEntry 3 } intTrapDestSnmpVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2(2) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The SNMP version of the manager. If it is v1, SNMPv1Traps are sent. If it is v2, SNMPv2Traps are sent" ::= { intTrapDestEntry 4 } intViewTable OBJECT-TYPE SYNTAX SEQUENCE OF IntViewEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Locally held information about the MIB views known to this agent. Each MIB view is defined by two collections of view subtrees: the included view subtrees, and the excluded view subtrees. Every such subtree, both included and excluded, is defined in this table. To determine if a particular object instance is in a particular MIB view, compare the object instance's OBJECT IDENTIFIER with each of the MIB view's entries in this table. If none match, then the object instance is not in the MIB view. If one or more match, then the object instance is included in, or excluded from, the MIB view according to the value of viewType in the entry whose value of viewSubtree has the most sub- identifiers. If multiple entries match and have the same number of sub-identifiers, then the lexicographically greatest instance of viewType determines the inclusion or exclusion. An object instance's OBJECT IDENTIFIER X matches an entry in this table when the number of sub- identifiers in X is at least as many as in the value of viewSubtree for the entry, and each sub- identifier in the value of viewSubtree matches its corresponding sub-identifier in X. Two sub- identifiers match either if the corresponding bit of viewMask is zero (the 'wild card' value), or if they are equal. Due to this 'wild card' capability, we introduce the term, a 'family' of view subtrees, to refer to the set of subtrees defined by a particular combination of values of viewSubtree and viewMask. In the case where no 'wild card' is defined in viewMask, the family of view subtrees reduces to a single view subtree." ::= { view 1 } intViewEntry OBJECT-TYPE SYNTAX IntViewEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Information on a particular family of view subtrees included in or excluded from a particular MIB view. Implementations must not restrict the number of families of view subtrees for a given MIB view, except as dictated by resource constraints on the overall number of entries in the viewTable." INDEX { intViewIndex, intViewSubtree } ::= { intViewTable 1 } IntViewEntry ::= SEQUENCE { intViewIndex Integer32, intViewSubtree OBJECT IDENTIFIER, intViewMask OCTET STRING, intViewType INTEGER, intViewStorageType StorageType, intViewStatus RowStatus } intViewIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A unique value for each MIB view. The value for each MIB view must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { intViewEntry 1 } intViewSubtree OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A MIB subtree." ::= { intViewEntry 2 } intViewMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The bit mask which, in combination with the corresponding instance of viewSubtree, defines a family of view subtrees. Each bit of this bit mask corresponds to a sub- identifier of viewSubtree, with the most significant bit of the i-th octet of this octet string value (extended if necessary, see below) corresponding to the (8*i - 7)-th sub-identifier, and the least significant bit of the i-th octet of this octet string corresponding to the (8*i)-th sub-identifier, where i is in the range 1 through 16. Each bit of this bit mask specifies whether or not the corresponding sub-identifiers must match when determining if an OBJECT IDENTIFIER is in this family of view subtrees; a '1' indicates that an exact match must occur; a '0' indicates 'wild card', i.e., any sub-identifier value matches. Thus, the OBJECT IDENTIFIER X of an object instance is contained in a family of view subtrees if the following criteria are met: for each sub-identifier of the value of viewSubtree, either: the i-th bit of viewMask is 0, or the i-th sub-identifier of X is equal to the i-th sub-identifier of the value of viewSubtree. If the value of this bit mask is M bits long and there are more than M sub-identifiers in the corresponding instance of viewSubtree, then the bit mask is extended with 1's to be the required length. Note that when the value of this object is the zero-length string, this extension rule results in a mask of all-1's being used (i.e., no 'wild card'), and the family of view subtrees is the one view subtree uniquely identified by the corresponding instance of viewSubtree." DEFVAL { ''H } ::= { intViewEntry 3 } intViewType OBJECT-TYPE SYNTAX INTEGER { included(1), excluded(2) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The status of a particular family of view subtrees within the particular MIB view. The value 'included(1)' indicates that the corresponding instances of viewSubtree and viewMask define a family of view subtrees included in the MIB view. The value 'excluded(2)' indicates that the corresponding instances of viewSubtree and viewMask define a family of view subtrees excluded from the MIB view." DEFVAL { included } ::= { intViewEntry 4 } intViewStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The storage type for this conceptual row in the intViewTable." DEFVAL { nonVolatile } ::= { intViewEntry 5 } intViewStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The status of this conceptual row in the intViewTable." ::= { intViewEntry 6 } -- conformance information otpSnmpeaMIBCompliances OBJECT IDENTIFIER ::= { otpSnmpeaMIBConformance 1 } otpSnmpeaMIBGroups OBJECT IDENTIFIER ::= { otpSnmpeaMIBConformance 2 } -- compliance statements otpSnmpeaBasicCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for SNMPv2 entities which implement the OTP-SNMPEA-MIB." MODULE -- this module MANDATORY-GROUPS { addressGroup } ::= { otpSnmpeaMIBCompliances 1 } -- units of conformance communityGroup OBJECT-GROUP OBJECTS { intCommunityViewIndex, intCommunityAccess, intCommunityStatus } STATUS obsolete DESCRIPTION "A collection of objects providing basic instrumentation of the load of the OTP system." ::= { otpSnmpeaMIBGroups 1 } addressGroup OBJECT-GROUP OBJECTS { intAgentIpAddress, intAgentUDPPort, intAgentMaxPacketSize, intAddressUDPPort, intAddressMaxPacketSize, intAddressStatus } STATUS obsolete DESCRIPTION "A collection of objects providing basic instrumentation of the load of the OTP system." ::= { otpSnmpeaMIBGroups 2 } trapGroup OBJECT-GROUP OBJECTS { intTrapDestStatus, intTrapDestSnmpVersion } STATUS obsolete DESCRIPTION "A collection of objects providing basic instrumentation of the load of the OTP system." ::= { otpSnmpeaMIBGroups 3 } viewGroup OBJECT-GROUP OBJECTS { intViewMask, intViewType, intViewStorageType, intViewStatus } STATUS obsolete DESCRIPTION "A collection of objects providing basic instrumentation of the load of the OTP system." ::= { otpSnmpeaMIBGroups 4 } END