STANDARD-MIB DEFINITIONS ::= BEGIN
 
          IMPORTS
                  Counter, TimeTicks, IpAddress
                      FROM RFC1155-SMI
                  OBJECT-TYPE
                      FROM RFC-1212
                  mgmt, NetworkAddress, IpAddress, Counter, Gauge,
                          TimeTicks
                      FROM RFC1155-SMI
                  DisplayString, mib-2
                      FROM RFC1213-MIB
                  OBJECT-TYPE
                          FROM RFC-1212;
 

          -- Standard Datatypes
 
          -- Represents a boolean value (from rfc1443)
          TruthValue ::=  INTEGER { true(1), false(2) }

          -- From SNMPv2 (rfc1443)
	  RowStatus ::= 
                INTEGER {
                         -- the following two values are states:
                         -- these values may be read or written
                         active(1),
                         notInService(2),

                         -- the following value is a state:
                         -- this value may be read, but not written
                         notReady(3),

                         -- the following three values are
                         -- actions: these values may be written,
                         --   but are never read
                         createAndGo(4),
                         createAndWait(5),
                         destroy(6)
                      }


          system       OBJECT IDENTIFIER ::= { mib-2 1 }
          snmp         OBJECT IDENTIFIER ::= { mib-2 11 }

 
          -- the System group
 
          -- Implementation of the System group is mandatory for all
          -- systems.  If an agent is not configured to have a value
          -- for any of these variables, a string of length 0 is
          -- returned.
 
          sysDescr OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A textual description of the entity.  This value
                      should include the full name and version
                      identification of the system's hardware type,
                      software operating-system, and networking
                      software.  It is mandatory that this only contain
                      printable ASCII characters."
              ::= { system 1 }
 
          sysObjectID OBJECT-TYPE
              SYNTAX  OBJECT IDENTIFIER
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The vendor's authoritative identification of the
                      network management subsystem contained in the
                      entity.  This value is allocated within the SMI
                      enterprises subtree (1.3.6.1.4.1) and provides an
                      easy and unambiguous means for determining `what
                      kind of box' is being managed.  For example, if
                      vendor `Flintstones, Inc.' was assigned the
                      subtree 1.3.6.1.4.1.4242, it could assign the
                      identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
                      Router'."
              ::= { system 2 }
 
          sysUpTime OBJECT-TYPE
              SYNTAX  TimeTicks
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The time (in hundredths of a second) since the
                      network management portion of the system was last
                      re-initialized."
              ::= { system 3 }
 
          sysContact OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The textual identification of the contact person
                      for this managed node, together with information
                      on how to contact this person."
              ::= { system 4 }
 
          sysName OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
 
 
 
 
 
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "An administratively-assigned name for this
                      managed node.  By convention, this is the node's
                      fully-qualified domain name."
              ::= { system 5 }
 
          sysLocation OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The physical location of this node (e.g.,
                      `telephone closet, 3rd floor')."
              ::= { system 6 }
 
          sysServices OBJECT-TYPE
              SYNTAX  INTEGER (0..127)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A value which indicates the set of services that
                      this entity primarily offers.
 
                      The value is a sum.  This sum initially takes the
                      value zero, Then, for each layer, L, in the range
                      1 through 7, that this node performs transactions
                      for, 2 raised to (L - 1) is added to the sum.  For
                      example, a node which performs primarily routing
                      functions would have a value of 4 (2^(3-1)).  In
                      contrast, a node which is a host offering
                      application services would have a value of 72
                      (2^(4-1) + 2^(7-1)).  Note that in the context of
                      the Internet suite of protocols, values should be
                      calculated accordingly:
 
                           layer  functionality
                               1  physical (e.g., repeaters)
                               2  datalink/subnetwork (e.g., bridges)
                               3  internet (e.g., IP gateways)
                               4  end-to-end  (e.g., IP hosts)
                               7  applications (e.g., mail relays)
 
                      For systems including OSI protocols, layers 5 and
                      6 may also be counted."
              ::= { system 7 }
 

          -- the SNMP group
 
          -- Implementation of the SNMP group is mandatory for all
          -- systems which support an SNMP protocol entity.  Some of
          -- the objects defined below will be zero-valued in those
          -- SNMP implementations that are optimized to support only
          -- those functions specific to either a management agent or
          -- a management station.  In particular, it should be
          -- observed that the objects below refer to an SNMP entity,
          -- and there may be several SNMP entities residing on a
          -- managed node (e.g., if the node is hosting acting as
          -- a management station).
 
          snmpInPkts OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of Messages delivered to the
                      SNMP entity from the transport service."
              ::= { snmp 1 }
 
          snmpOutPkts OBJECT-TYPE
              SYNTAX  Counter
 
 
 
 
 
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Messages which were
                      passed from the SNMP protocol entity to the
                      transport service."
              ::= { snmp 2 }
 
          snmpInBadVersions OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Messages which were
                      delivered to the SNMP protocol entity and were for
                      an unsupported SNMP version."
              ::= { snmp 3 }
 
          snmpInBadCommunityNames OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Messages delivered to
                      the SNMP protocol entity which used a SNMP
                      community name not known to said entity."
              ::= { snmp 4 }
 
          snmpInBadCommunityUses OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Messages delivered to
                      the SNMP protocol entity which represented an SNMP
                      operation which was not allowed by the SNMP
                      community named in the Message."
              ::= { snmp 5 }
 
          snmpInASNParseErrs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of ASN.1 or BER errors
                      encountered by the SNMP protocol entity when
                      decoding received SNMP Messages."
              ::= { snmp 6 }
 
 
 
 
 
          -- { snmp 7 } is not used
 
          snmpInTooBigs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP PDUs which were
                      delivered to the SNMP protocol entity and for
                      which the value of the error-status field is
                      `tooBig'."
              ::= { snmp 8 }
 
          snmpInNoSuchNames OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP PDUs which were
                      delivered to the SNMP protocol entity and for
                      which the value of the error-status field is
                      `noSuchName'."
              ::= { snmp 9 }
 
          snmpInBadValues OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP PDUs which were
                      delivered to the SNMP protocol entity and for
                      which the value of the error-status field is
                      `badValue'."
              ::= { snmp 10 }
 
          snmpInReadOnlys OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number valid SNMP PDUs which were
                      delivered to the SNMP protocol entity and for
                      which the value of the error-status field is
                      `readOnly'.  It should be noted that it is a
                      protocol error to generate an SNMP PDU which
                      contains the value `readOnly' in the error-status
                      field, as such this object is provided as a means
                      of detecting incorrect implementations of the
 
 
 
 
 
                      SNMP."
              ::= { snmp 11 }
 
          snmpInGenErrs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP PDUs which were
                      delivered to the SNMP protocol entity and for
                      which the value of the error-status field is
                      `genErr'."
              ::= { snmp 12 }
 
          snmpInTotalReqVars OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of MIB objects which have been
                      retrieved successfully by the SNMP protocol entity
                      as the result of receiving valid SNMP Get-Request
                      and Get-Next PDUs."
              ::= { snmp 13 }
 
          snmpInTotalSetVars OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of MIB objects which have been
                      altered successfully by the SNMP protocol entity
                      as the result of receiving valid SNMP Set-Request
                      PDUs."
              ::= { snmp 14 }
 
          snmpInGetRequests OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Get-Request PDUs which
                      have been accepted and processed by the SNMP
                      protocol entity."
              ::= { snmp 15 }
 
          snmpInGetNexts OBJECT-TYPE
              SYNTAX  Counter
 
 
 
 
 
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Get-Next PDUs which have
                      been accepted and processed by the SNMP protocol
                      entity."
              ::= { snmp 16 }
 
          snmpInSetRequests OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Set-Request PDUs which
                      have been accepted and processed by the SNMP
                      protocol entity."
              ::= { snmp 17 }
 
          snmpInGetResponses OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Get-Response PDUs which
                      have been accepted and processed by the SNMP
                      protocol entity."
              ::= { snmp 18 }
 
          snmpInTraps OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Trap PDUs which have
                      been accepted and processed by the SNMP protocol
                      entity."
              ::= { snmp 19 }
 
          snmpOutTooBigs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP PDUs which were
                      generated by the SNMP protocol entity and for
                      which the value of the error-status field is
                      `tooBig.'"
              ::= { snmp 20 }
 
 
 
 
 
          snmpOutNoSuchNames OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP PDUs which were
                      generated by the SNMP protocol entity and for
                      which the value of the error-status is
                      `noSuchName'."
              ::= { snmp 21 }
 
          snmpOutBadValues OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP PDUs which were
                      generated by the SNMP protocol entity and for
                      which the value of the error-status field is
                      `badValue'."
              ::= { snmp 22 }
 
          -- { snmp 23 } is not used
 
          snmpOutGenErrs OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP PDUs which were
                      generated by the SNMP protocol entity and for
                      which the value of the error-status field is
                      `genErr'."
              ::= { snmp 24 }
 
          snmpOutGetRequests OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Get-Request PDUs which
                      have been generated by the SNMP protocol entity."
              ::= { snmp 25 }
 
          snmpOutGetNexts OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
 
 
 
 
 
              DESCRIPTION
                      "The total number of SNMP Get-Next PDUs which have
                      been generated by the SNMP protocol entity."
              ::= { snmp 26 }
 
          snmpOutSetRequests OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Set-Request PDUs which
                      have been generated by the SNMP protocol entity."
              ::= { snmp 27 }
 
          snmpOutGetResponses OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Get-Response PDUs which
                      have been generated by the SNMP protocol entity."
              ::= { snmp 28 }
 
          snmpOutTraps OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of SNMP Trap PDUs which have
                      been generated by the SNMP protocol entity."
              ::= { snmp 29 }
 
          snmpEnableAuthenTraps OBJECT-TYPE
              SYNTAX  INTEGER { enabled(1), disabled(2) }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Indicates whether the SNMP agent process is
                      permitted to generate authentication-failure
                      traps.  The value of this object overrides any
                      configuration information; as such, it provides a
                      means whereby all authentication-failure traps may
                      be disabled.
 
                      Note that it is strongly recommended that this
                      object be stored in non-volatile memory so that it
                      remains constant between re-initializations of the
                      network management system."
              ::= { snmp 30 }
 
          authenticationFailure TRAP-TYPE
              ENTERPRISE  snmp
              DESCRIPTION
                          "An authenticationFailure trap signifies that
                          the sending protocol entity is the addressee
                          of a protocol message that is not properly
                          authenticated.  While implementations of the
                          SNMP must be capable of generating this trap,
                          they must also be capable of suppressing the
                          emission of such traps via an implementation-
                          specific mechanism."
              ::= 4

          END