ssh_sftp

20052014 Ericsson AB. All Rights Reserved. The contents of this file are subject to the Erlang Public License, Version 1.1, (the "License"); you may not use this file except in compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. ssh_sftp OTP 2005-09-22 ssh_sftp.sgml

ssh_sftp SFTP client.

This module implements an SFTP (SSH FTP) client. SFTP is a secure, encrypted file transfer service available for SSH.

DATA TYPES

Type definitions that are used more than once in this module and/or abstractions to indicate the intended use of the data type:

ssh_connection_ref() - opaque to the user returned by ssh:connect/3

timeout() = infinity | integer() - in milliseconds.

TIMEOUTS

If the request functions for the SFTP channel return {error, timeout} it does not guarantee that the request did not reach the server and was not performed, it only means that we did not receive an answer from the server within the time that was expected.

start_channel(ConnectionRef) -> start_channel(ConnectionRef, Options) -> start_channel(Host, Options) -> start_channel(Host, Port, Options) -> {ok, Pid} | {ok, Pid, ConnectionRef} | {error, Reason} Starts a SFTP client Host = string() ConnectionRef = ssh_connection_ref() Port = integer() Options = [{Option, Value}] Reason = term()

If no connection reference is provided, a connection is set up and the new connection is returned. An SSH channel process is started to handle the communication with the SFTP server. The returned pid for this process should be used as input to all other API functions in this module.

Options are:

The timeout is passed to the ssh_channel start function, and defaults to infinity.

Desired SFTP protocol version. The actual version will be the minimum of the desired version and the maximum supported versions by the SFTP server.

All other options are directly passed to ssh:connect/3 or ignored if a connection is already provided.

stop_channel(ChannelPid) -> ok Stops the SFTP client channel. ChannelPid = pid()

Stops an SFTP channel. Does not close the SSH connetion. Use ssh:close/1 to close it.

read_file(ChannelPid, File) -> read_file(ChannelPid, File, Timeout) -> {ok, Data} | {error, Reason} Read a file ChannelPid = pid() File = string() Data = binary() Timeout = timeout() Reason = term()

Reads a file from the server, and returns the data in a binary, like .

write_file(ChannelPid, File, Iolist) -> write_file(ChannelPid, File, Iolist, Timeout) -> ok | {error, Reason} Write a file ChannelPid = pid() File = string() Iolist = iolist() Timeout = timeout() Reason = term()

Writes a file to the server, like . The file is created if it does not exist or is owerwritten if it does.

list_dir(ChannelPid, Path) -> list_dir(ChannelPid, Path, Timeout) -> {ok, Filenames} | {error, Reason} List directory ChannelPid = pid() Path = string() Filenames = [Filename] Filename = string() Timeout = timeout() Reason = term()

Lists the given directory on the server, returning the filenames as a list of strings.

open(ChannelPid, File, Mode) -> open(ChannelPid, File, Mode, Timeout) -> {ok, Handle} | {error, Reason} Open a file and return a handle ChannelPid = pid() File = string() Mode = [Modeflag] Modeflag = read | write | creat | trunc | append | binary Timeout = timeout() Handle = term() Reason = term()

Opens a file on the server, and returns a handle that can be used for reading or writing.

opendir(ChannelPid, Path) -> opendir(ChannelPid, Path, Timeout) -> {ok, Handle} | {error, Reason} Open a directory and return a handle ChannelPid = pid() Path = string() Timeout = timeout() Reason = term()

Opens a handle to a directory on the server, the handle can be used for reading directory contents.

open_tar(ChannelPid, Path) -> open_tar(ChannelPid, Path, Timeout) -> {ok, Handle} | {error, Reason} Open a tar file on the server to which ChannelPid is connected and return a handle ChannelPid = pid() Path = string() Timeout = timeout() Reason = term()

Opens a handle to a tar file on the server, the handle can be used for remote tar manipulation as defined by the erl_tar:init/3 function.

close(ChannelPid, Handle) -> close(ChannelPid, Handle, Timeout) -> ok | {error, Reason} Close an open handle ChannelPid = pid() Handle = term() Timeout = timeout() Reason = term()

Closes a handle to an open file or directory on the server.

read(ChannelPid, Handle, Len) -> read(ChannelPid, Handle, Len, Timeout) -> {ok, Data} | eof | {error, Error} pread(ChannelPid, Handle, Position, Len) -> pread(ChannelPid, Handle, Position, Len, Timeout) -> {ok, Data} | eof | {error, Error} Read from an open file ChannelPid = pid() Handle = term() Position = integer() Len = integer() Timeout = timeout() Data = string() | binary() Reason = term()

Reads bytes from the file referenced by . Returns , , or . If the file is opened with , is a binary, otherwise it is a string.

If the file is read past eof, only the remaining bytes will be read and returned. If no bytes are read, is returned.

The function reads from a specified position, combining the and functions.

aread(ChannelPid, Handle, Len) -> {async, N} | {error, Error} apread(ChannelPid, Handle, Position, Len) -> {async, N} | {error, Error} Read asynchronously from an open file ChannelPid = pid() Handle = term() Position = integer() Len = integer() N = term() Reason = term()

Reads from an open file, without waiting for the result. If the handle is valid, the function returns , where N is a term guaranteed to be unique between calls of . The actual data is sent as a message to the calling process. This message has the form , where is the result from the read, either , or , or .

The function reads from a specified position, combining the and functions.

write(ChannelPid, Handle, Data) -> write(ChannelPid, Handle, Data, Timeout) -> ok | {error, Error} pwrite(ChannelPid, Handle, Position, Data) -> ok pwrite(ChannelPid, Handle, Position, Data, Timeout) -> ok | {error, Error} Write to an open file ChannelPid = pid() Handle = term() Position = integer() Data = iolist() Timeout = timeout() Reason = term()

Writes to the file referenced by . The file should be opened with or flag. Returns if successful or S otherwise.

Typical error reasons are:

The file is not opened for writing.

There is a no space left on the device.

awrite(ChannelPid, Handle, Data) -> ok | {error, Reason} apwrite(ChannelPid, Handle, Position, Data) -> ok | {error, Reason} Write asynchronously to an open file ChannelPid = pid() Handle = term() Position = integer() Len = integer() Data = binary() Timeout = timeout() Reason = term()

Writes to an open file, without waiting for the result. If the handle is valid, the function returns , where N is a term guaranteed to be unique between calls of . The result of the operation is sent as a message to the calling process. This message has the form , where is the result from the write, either , or .

The writes on a specified position, combining the and operations.

position(ChannelPid, Handle, Location) -> position(ChannelPid, Handle, Location, Timeout) -> {ok, NewPosition | {error, Error} Seek position in open file ChannelPid = pid() Handle = term() Location = Offset | {bof, Offset} | {cur, Offset} | {eof, Offset} | bof | cur | eof Offset = integer() Timeout = timeout() NewPosition = integer() Reason = term()

Sets the file position of the file referenced by . Returns (as an absolute offset) if successful, otherwise . is one of the following:

The same as .

Absolute offset.

Offset from the current position.

Offset from the end of file.

The same as above with 0.

read_file_info(ChannelPid, Name) -> read_file_info(ChannelPid, Name, Timeout) -> {ok, FileInfo} | {error, Reason} Get information about a file ChannelPid = pid() Name = string() Handle = term() Timeout = timeout() FileInfo = record() Reason = term()

Returns a record from the file specified by or , like .

read_link_info(ChannelPid, Name) -> {ok, FileInfo} | {error, Reason} read_link_info(ChannelPid, Name, Timeout) -> {ok, FileInfo} | {error, Reason} Get information about a symbolic link ChannelPid = pid() Name = string() Handle = term() Timeout = timeout() FileInfo = record() Reason = term()

Returns a record from the symbolic link specified by or , like .

write_file_info(ChannelPid, Name, Info) -> write_file_info(ChannelPid, Name, Info, Timeout) -> ok | {error, Reason} Write information for a file ChannelPid = pid() Name = string() Info = record() Timeout = timeout() Reason = term()

Writes file information from a record to the file specified by , like .

read_link(ChannelPid, Name) -> read_link(ChannelPid, Name, Timeout) -> {ok, Target} | {error, Reason} Read symbolic link ChannelPid = pid() Name = string() Target = string() Reason = term()

Reads the link target from the symbolic link specified by , like .

make_symlink(ChannelPid, Name, Target) -> make_symlink(ChannelPid, Name, Target, Timeout) -> ok | {error, Reason} Create symbolic link ChannelPid = pid() Name = string() Target = string() Reason = term()

Creates a symbolic link pointing to with the name , like .

rename(ChannelPid, OldName, NewName) -> rename(ChannelPid, OldName, NewName, Timeout) -> ok | {error, Reason} Rename a file ChannelPid = pid() OldName = string() NewName = string() Timeout = timeout() Reason = term()

Renames a file named , and gives it the name , like

delete(ChannelPid, Name) -> delete(ChannelPid, Name, Timeout) -> ok | {error, Reason} Delete a file ChannelPid = pid() Name = string() Timeout = timeout() Reason = term()

Deletes the file specified by , like

make_dir(ChannelPid, Name) -> make_dir(ChannelPid, Name, Timeout) -> ok | {error, Reason} Create a directory ChannelPid = pid() Name = string() Timeout = timeout() Reason = term()

Creates a directory specified by . should be a full path to a new directory. The directory can only be created in an existing directory.

del_dir(ChannelPid, Name) -> del_dir(ChannelPid, Name, Timeout) -> ok | {error, Reason} Delete an empty directory ChannelPid = pid() Name = string() Timeout = timeout() Reason = term()

Deletes a directory specified by . Note that the directory must be empty before it can be successfully deleted