%% %% %CopyrightBegin% %% %% Copyright Ericsson AB 2004-2016. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. %% You may obtain a copy of the License at %% %% http://www.apache.org/licenses/LICENSE-2.0 %% %% Unless required by applicable law or agreed to in writing, software %% distributed under the License is distributed on an "AS IS" BASIS, %% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. %% See the License for the specific language governing permissions and %% limitations under the License. %% %% %CopyrightEnd% %% %% -module(ssh_eqc_client_server). -compile(export_all). -include_lib("common_test/include/ct.hrl"). -ifdef(PROPER). %% Proper is not supported. -else. -ifdef(TRIQ). %% Proper is not supported. -else. %% Limit the testing time on CI server... this needs to be improved in % from total budget. -define(TESTINGTIME(Prop), eqc:testing_time(30,Prop)). -include_lib("eqc/include/eqc.hrl"). -include_lib("eqc/include/eqc_statem.hrl"). -eqc_group_commands(true). -define(SSH_DIR,"ssh_eqc_client_server_dirs"). -define(sec, *1000). -define(min, *60?sec). -record(srvr,{ref, address, port }). -record(conn,{ref, srvr_ref }). -record(chan, {ref, conn_ref, subsystem, client_pid }). -record(state,{ initialized = false, servers = [], % [#srvr{}] clients = [], connections = [], % [#conn{}] channels = [], % [#chan{}] data_dir }). %%%=============================================================== %%% %%% Specification of addresses, subsystems and such. %%% -define(MAX_NUM_SERVERS, 3). -define(MAX_NUM_CLIENTS, 3). -define(SUBSYSTEMS, ["echo1", "echo2", "echo3", "echo4"]). -define(SERVER_ADDRESS, { {127,1,0,choose(1,254)}, % IP choose(1024,65535) % Port }). -define(SERVER_EXTRA_OPTIONS, [{parallel_login,bool()}] ). %%%================================================================ %%% %%% The properties - one sequantial and one parallel with the same model %%% %%% Run as %%% %%% $ (cd ..; make) %%% $ erl -pz .. %%% %%% eqc:quickcheck( ssh_eqc_client_server:prop_seq() ). %%% eqc:quickcheck( ssh_eqc_client_server:prop_parallel() ). %%% eqc:quickcheck( ssh_eqc_client_server:prop_parallel_multi() ). %%% %% To be called as eqc:quickcheck( ssh_eqc_client_server:prop_seq() ). prop_seq() -> ?TESTINGTIME(do_prop_seq(?SSH_DIR)). %% To be called from a common_test test suite prop_seq(CT_Config) -> do_prop_seq(full_path(?SSH_DIR, CT_Config)). do_prop_seq(DataDir) -> setup_rsa(DataDir), ?FORALL(Cmds,commands(?MODULE), begin {H,Sf,Result} = run_commands(?MODULE,Cmds,[{data_dir,DataDir}]), present_result(?MODULE, Cmds, {H,Sf,Result}, Result==ok) end). full_path(SSHdir, CT_Config) -> filename:join(proplists:get_value(property_dir, CT_Config), SSHdir). %%%---- prop_parallel() -> ?TESTINGTIME(do_prop_parallel(?SSH_DIR)). %% To be called from a common_test test suite prop_parallel(CT_Config) -> do_prop_parallel(full_path(?SSH_DIR, CT_Config)). do_prop_parallel(DataDir) -> setup_rsa(DataDir), ?FORALL(Cmds,parallel_commands(?MODULE), begin {H,Sf,Result} = run_parallel_commands(?MODULE,Cmds,[{data_dir,DataDir}]), present_result(?MODULE, Cmds, {H,Sf,Result}, Result==ok) end). %%%---- prop_parallel_multi() -> ?TESTINGTIME(do_prop_parallel_multi(?SSH_DIR)). %% To be called from a common_test test suite prop_parallel_multi(CT_Config) -> do_prop_parallel_multi(full_path(?SSH_DIR, CT_Config)). do_prop_parallel_multi(DataDir) -> setup_rsa(DataDir), ?FORALL(Repetitions,?SHRINK(1,[10]), ?FORALL(Cmds,parallel_commands(?MODULE), ?ALWAYS(Repetitions, begin {H,Sf,Result} = run_parallel_commands(?MODULE,Cmds,[{data_dir,DataDir}]), present_result(?MODULE, Cmds, {H,Sf,Result}, Result==ok) end))). %%%================================================================ %%% State machine spec %%% called when using commands/1 initial_state() -> #state{}. %%% called when using commands/2 initial_state(DataDir) -> application:stop(ssh), ssh:start(). %%%---------------- weight(S, ssh_send) -> 5*length([C || C<-S#state.channels, has_subsyst(C)]); weight(S, ssh_start_subsyst) -> 3*length([C || C<-S#state.channels, no_subsyst(C)]); weight(S, ssh_close_channel) -> 2*length([C || C<-S#state.channels, has_subsyst(C)]); weight(S, ssh_open_channel) -> length(S#state.connections); weight(_S, _) -> 1. %%%---------------- %%% Initialize initial_state_pre(S) -> not S#state.initialized. initial_state_args(_) -> [{var,data_dir}]. initial_state_next(S, _, _) -> S#state{initialized=true}. %%%---------------- %%% Start a new daemon %%% Precondition: not more than ?MAX_NUM_SERVERS started %%% This is a bit funny because we need to pick an IP address and Port to %%% run the server on, but there is no way to atomically select a free Port! %%% %%% Therefore we just grab one IP-Port pair randomly and try to start the ssh server %%% on that pair. If it fails, we just forget about it and goes on. Yes, it %%% is a waste of cpu cycles, but at least it works! ssh_server_pre(S) -> S#state.initialized andalso length(S#state.servers) < ?MAX_NUM_SERVERS. ssh_server_args(_) -> [?SERVER_ADDRESS, {var,data_dir}, ?SERVER_EXTRA_OPTIONS]. ssh_server({IP,Port}, DataDir, ExtraOptions) -> ok(ssh:daemon(IP, Port, [ {system_dir, system_dir(DataDir)}, {user_dir, user_dir(DataDir)}, {subsystems, [{SS, {ssh_eqc_subsys, [SS]}} || SS <- ?SUBSYSTEMS]} | ExtraOptions ])). ssh_server_post(_S, _Args, {error,eaddrinuse}) -> true; ssh_server_post(_S, _Args, Result) -> is_ok(Result). ssh_server_next(S, {error,eaddrinuse}, _) -> S; ssh_server_next(S, Result, [{IP,Port},_,_]) -> S#state{servers=[#srvr{ref = Result, address = IP, port = Port} | S#state.servers]}. %%%---------------- %%% Start a new client %%% Precondition: not more than ?MAX_NUM_CLIENTS started ssh_client_pre(S) -> S#state.initialized andalso length(S#state.clients) < ?MAX_NUM_CLIENTS. ssh_client_args(_S) -> []. ssh_client() -> spawn(fun client_init/0). ssh_client_next(S, Pid, _) -> S#state{clients=[Pid|S#state.clients]}. client_init() -> client_loop(). client_loop() -> receive {please_do,Fun,Ref,Pid} -> Pid ! {my_pleasure, catch Fun(), Ref}, client_loop() end. do(Pid, Fun) -> do(Pid, Fun, 30?sec). do(Pid, Fun, Timeout) when is_function(Fun,0) -> Pid ! {please_do,Fun,Ref=make_ref(),self()}, receive {my_pleasure, Result, Ref} -> Result after Timeout -> {error,do_timeout} end. %%%---------------- %%% Start a new connection %%% Precondition: deamon exists ssh_open_connection_pre(S) -> S#state.servers /= []. ssh_open_connection_args(S) -> [oneof(S#state.servers), {var,data_dir}]. ssh_open_connection(#srvr{address=Ip, port=Port}, DataDir) -> ok(ssh:connect(ensure_string(Ip), Port, [ {silently_accept_hosts, true}, {user_dir, user_dir(DataDir)}, {user_interaction, false}, {connect_timeout, 2000} ], 2000)). ssh_open_connection_post(_S, _Args, Result) -> is_ok(Result). ssh_open_connection_next(S, ConnRef, [#srvr{ref=SrvrRef},_]) -> S#state{connections=[#conn{ref=ConnRef, srvr_ref=SrvrRef}|S#state.connections]}. %%%---------------- %%% Stop a new connection %%% Precondition: connection exists ssh_close_connection_pre(S) -> S#state.connections /= []. ssh_close_connection_args(S) -> [oneof(S#state.connections)]. ssh_close_connection(#conn{ref=ConnectionRef}) -> ssh:close(ConnectionRef). ssh_close_connection_next(S, _, [Conn=#conn{ref=ConnRef}]) -> S#state{connections = S#state.connections--[Conn], channels = [C || C <- S#state.channels, C#chan.conn_ref /= ConnRef] }. %%%---------------- %%% Start a new channel without a sub system %%% Precondition: connection exists ssh_open_channel_pre(S) -> S#state.connections /= []. ssh_open_channel_args(S) -> [oneof(S#state.connections)]. %%% For re-arrangement in parallel tests. ssh_open_channel_pre(S,[C]) -> lists:member(C,S#state.connections). ssh_open_channel(#conn{ref=ConnectionRef}) -> ok(ssh_connection:session_channel(ConnectionRef, 20?sec)). ssh_open_channel_post(_S, _Args, Result) -> is_ok(Result). ssh_open_channel_next(S, ChannelRef, [#conn{ref=ConnRef}]) -> S#state{channels=[#chan{ref=ChannelRef, conn_ref=ConnRef} | S#state.channels]}. %%%---------------- %%% Stop a channel %%% Precondition: a channel exists, with or without a subsystem ssh_close_channel_pre(S) -> S#state.channels /= []. ssh_close_channel_args(S) -> [oneof(S#state.channels)]. ssh_close_channel(#chan{ref=ChannelRef, conn_ref=ConnectionRef}) -> ssh_connection:close(ConnectionRef, ChannelRef). ssh_close_channel_next(S, _, [C]) -> S#state{channels = [Ci || Ci <- S#state.channels, sig(C) /= sig(Ci)]}. sig(C) -> {C#chan.ref, C#chan.conn_ref}. %%%---------------- %%% Start a sub system on a channel %%% Precondition: A channel without subsystem exists ssh_start_subsyst_pre(S) -> lists:any(fun no_subsyst/1, S#state.channels) andalso S#state.clients /= []. ssh_start_subsyst_args(S) -> [oneof(lists:filter(fun no_subsyst/1, S#state.channels)), oneof(?SUBSYSTEMS), oneof(S#state.clients) ]. %% For re-arrangement in parallel tests. ssh_start_subsyst_pre(S, [C|_]) -> lists:member(C,S#state.channels) andalso no_subsyst(C). ssh_start_subsyst(#chan{ref=ChannelRef, conn_ref=ConnectionRef}, SubSystem, Pid) -> do(Pid, fun()->ssh_connection:subsystem(ConnectionRef, ChannelRef, SubSystem, 120?sec) end). ssh_start_subsyst_post(_S, _Args, Result) -> Result==success. ssh_start_subsyst_next(S, _Result, [C,SS,Pid|_]) -> S#state{channels = [C#chan{subsystem=SS, client_pid=Pid}|(S#state.channels--[C])] }. %%%---------------- %%% Send a message on a channel %%% Precondition: a channel exists with a subsystem connected ssh_send_pre(S) -> lists:any(fun has_subsyst/1, S#state.channels). ssh_send_args(S) -> [oneof(lists:filter(fun has_subsyst/1, S#state.channels)), choose(0,1), message()]. %% For re-arrangement in parallel tests. ssh_send_pre(S, [C|_]) -> lists:member(C, S#state.channels). ssh_send(C=#chan{conn_ref=ConnectionRef, ref=ChannelRef, client_pid=Pid}, Type, Msg) -> do(Pid, fun() -> case ssh_connection:send(ConnectionRef, ChannelRef, Type, modify_msg(C,Msg), 10?sec) of ok -> receive {ssh_cm,ConnectionRef,{data,ChannelRef,Type,Answer}} -> Answer after 15?sec -> %% receive %% Other -> {error,{unexpected,Other}} %% after 0 -> {error,receive_timeout} %% end end; Other -> Other end end). ssh_send_blocking(_S, _Args) -> true. ssh_send_post(_S, [C,_,Msg], Response) when is_binary(Response) -> Expected = ssh_eqc_subsys:response(modify_msg(C,Msg), C#chan.subsystem), case Response of Expected -> true; _ -> {send_failed, size(Response), size(Expected)} end; ssh_send_post(_S, _Args, Response) -> {error,Response}. modify_msg(_, <<>>) -> <<>>; modify_msg(#chan{subsystem=SS}, Msg) -> <<(list_to_binary(SS))/binary,Msg/binary>>. %%%================================================================ %%% Misc functions message() -> resize(500, binary()). %% binary(). %% oneof([binary(), %% ?LET(Size, choose(0,10000), binary(Size)) %% ]). has_subsyst(C) -> C#chan.subsystem /= undefined. no_subsyst(C) -> not has_subsyst(C). ok({ok,X}) -> X; ok({error,Err}) -> {error,Err}. is_ok({error,_}) -> false; is_ok(_) -> true. ensure_string({A,B,C,D}) -> lists:flatten(io_lib:format("~w.~w.~w.~w",[A,B,C,D])); ensure_string(X) -> X. %%%---------------------------------------------------------------- present_result(_Module, Cmds, _Triple, true) -> aggregate(with_title("Distribution sequential/parallel"), sequential_parallel(Cmds), aggregate(with_title("Function calls"), cmnd_names(Cmds), aggregate(with_title("Message sizes"), empty_msgs(Cmds), aggregate(print_frequencies(), message_sizes(Cmds), aggregate(title("Length of command sequences",print_frequencies()), num_calls(Cmds), true))))); present_result(Module, Cmds, Triple, false) -> pretty_commands(Module, Cmds, Triple, [{show_states,true}], false). cmnd_names(Cs) -> traverse_commands(fun cmnd_name/1, Cs). cmnd_name(L) -> [F || {set,_Var,{call,_Mod,F,_As}} <- L]. empty_msgs(Cs) -> traverse_commands(fun empty_msg/1, Cs). empty_msg(L) -> [empty || {set,_,{call,_,ssh_send,[_,_,Msg]}} <- L, size(Msg)==0]. message_sizes(Cs) -> traverse_commands(fun message_size/1, Cs). message_size(L) -> [size(Msg) || {set,_,{call,_,ssh_send,[_,_,Msg]}} <- L]. num_calls(Cs) -> traverse_commands(fun num_call/1, Cs). num_call(L) -> [length(L)]. sequential_parallel(Cs) -> traverse_commands(fun(L) -> dup_module(L, sequential) end, fun(L) -> [dup_module(L1, mkmod("parallel",num(L1,L))) || L1<-L] end, Cs). dup_module(L, ModName) -> lists:duplicate(length(L), ModName). mkmod(PfxStr,N) -> list_to_atom(PfxStr++"_"++integer_to_list(N)). %% Meta functions for the aggregate functions traverse_commands(Fun, L) when is_list(L) -> Fun(L); traverse_commands(Fun, {Seq, ParLs}) -> Fun(lists:append([Seq|ParLs])). traverse_commands(Fseq, _Fpar, L) when is_list(L) -> Fseq(L); traverse_commands(Fseq, Fpar, {Seq, ParLs}) -> lists:append([Fseq(Seq)|Fpar(ParLs)]). %%%---------------- %% PrintMethod([{term(), int()}]) -> any(). print_frequencies() -> print_frequencies(10). print_frequencies(Ngroups) -> fun([]) -> io:format('Empty list!~n',[]); (L ) -> print_frequencies(L,Ngroups,0,element(1,lists:last(L))) end. print_frequencies(Ngroups, MaxValue) -> fun(L) -> print_frequencies(L,Ngroups,0,MaxValue) end. print_frequencies(L, N, Min, Max) when N>Max -> print_frequencies(L++[{N,0}], N, Min, N); print_frequencies(L, N, Min, Max) -> %%io:format('L=~p~n',[L]), try IntervalUpperLimits = lists:reverse( [Max | tl(lists:reverse(lists:seq(Min,Max,round((Max-Min)/N))))] ), {Acc0,_} = lists:mapfoldl(fun(Upper,Lower) -> {{{Lower,Upper},0}, Upper+1} end, hd(IntervalUpperLimits), tl(IntervalUpperLimits)), Fs0 = get_frequencies(L, Acc0), SumVal = lists:sum([V||{_,V}<-Fs0]), Fs = with_percentage(Fs0, SumVal), Mean = mean(L), Median = median(L), Npos_value = num_digits(SumVal), Npos_range = num_digits(Max), io:format("Range~*s: ~s~n",[2*Npos_range-2,"", "Number in range"]), io:format("~*c:~*c~n",[2*Npos_range+3,$-, max(16,Npos_value+10),$- ]), [begin io:format("~*w - ~*w: ~*w ~5.1f%",[Npos_range,Rlow, Npos_range,Rhigh, Npos_value,Val, Percent]), [io:format(" <-- mean=~.1f",[Mean]) || in_interval(Mean, Interval)], [io:format(" <-- median=" ++ if is_float(Median) -> "~.1f"; true -> "~p" end, [Median]) || in_interval(Median, Interval)], io:nl() end || {Interval={Rlow,Rhigh},Val,Percent} <- Fs], io:format('~*c ~*c~n',[2*Npos_range,32,Npos_value+2,$-]), io:format('~*c ~*w~n',[2*Npos_range,32,Npos_value,SumVal]) %%,io:format('L=~p~n',[L]) catch C:E -> io:format('*** Faild printing (~p:~p) for~n~p~n',[C,E,L]) end. get_frequencies([{I,Num}|T], [{{Lower,Upper},Cnt}|Acc]) when Lower= get_frequencies(T, [{{Lower,Upper},Cnt+Num}|Acc]); get_frequencies(L=[{I,_Num}|_], [Ah={{_Lower,Upper},_Cnt}|Acc]) when I>Upper -> [Ah | get_frequencies(L,Acc)]; get_frequencies([], Acc) -> Acc. with_percentage(Fs, Sum) -> [{Rng,Val,100*Val/Sum} || {Rng,Val} <- Fs]. title(Str, Fun) -> fun(L) -> io:format('~s~n',[Str]), Fun(L) end. num_digits(I) -> 1+trunc(math:log(I)/math:log(10)). num(Elem, List) -> length(lists:takewhile(fun(E) -> E /= Elem end, List)) + 1. %%%---- Just for naming an operation for readability is_odd(I) -> (I rem 2) == 1. in_interval(Value, {Rlow,Rhigh}) -> try Rlow= false end. %%%================================================================ %%% Statistical functions %%%---- Mean value mean(L = [X|_]) when is_number(X) -> lists:sum(L) / length(L); mean(L = [{_Value,_Weight}|_]) -> SumOfWeights = lists:sum([W||{_,W}<-L]), WeightedSum = lists:sum([W*V||{V,W}<-L]), WeightedSum / SumOfWeights; mean(_) -> undefined. %%%---- Median median(L = [X|_]) when is_number(X) -> case is_odd(length(L)) of true -> hd(lists:nthtail(length(L) div 2, L)); false -> %% 1) L has at least on element (the when test). %% 2) Length is even. %% => Length >= 2 [M1,M2|_] = lists:nthtail((length(L) div 2)-1, L), (M1+M2) / 2 end; %% integer Weights... median(L = [{_Value,_Weight}|_]) -> median( lists:append([lists:duplicate(W,V) || {V,W} <- L]) ); median(_) -> undefined. %%%================================================================ %%% The rest is taken and modified from ssh_test_lib.erl setup_rsa(Dir) -> erase_dir(system_dir(Dir)), erase_dir(user_dir(Dir)), file:make_dir(system_dir(Dir)), file:make_dir(user_dir(Dir)), file:copy(data_dir(Dir,"id_rsa"), user_dir(Dir,"id_rsa")), file:copy(data_dir(Dir,"ssh_host_rsa_key"), system_dir(Dir,"ssh_host_rsa_key")), file:copy(data_dir(Dir,"ssh_host_rsa_key"), system_dir(Dir,"ssh_host_rsa_key.pub")), ssh_test_lib:setup_rsa_known_host(data_dir(Dir), user_dir(Dir)), ssh_test_lib:setup_rsa_auth_keys(data_dir(Dir), user_dir(Dir)). data_dir(Dir, File) -> filename:join(Dir, File). system_dir(Dir, File) -> filename:join([Dir, "system", File]). user_dir(Dir, File) -> filename:join([Dir, "user", File]). data_dir(Dir) -> Dir. system_dir(Dir) -> system_dir(Dir,""). user_dir(Dir) -> user_dir(Dir,""). erase_dir(Dir) -> case file:list_dir(Dir) of {ok,Files} -> lists:foreach(fun(F) -> file:delete(filename:join(Dir,F)) end, Files); _ -> ok end, file:del_dir(Dir). -endif. -endif.