20132018 Ericsson AB. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. maps Björn-Egil Dahlberg 1 2014-02-28 A
maps Maps processing functions.

This module contains functions for maps processing.

An iterator representing the key value associations in a map.

Created using maps:iterator/1.

Consumed by maps:next/1, maps:filter/2, maps:fold/3 and maps:map/2.

Select pairs that satisfy a predicate.

Returns a map Map for which predicate Pred holds true in MapOrIter.

The call fails with a {badmap,Map} exception if MapOrIter is not a map or valid iterator, or with badarg if Pred is not a function of arity 2.

Example:

> M = #{a => 2, b => 3, c=> 4, "a" => 1, "b" => 2, "c" => 4}, Pred = fun(K,V) -> is_atom(K) andalso (V rem 2) =:= 0 end, maps:filter(Pred,M). #{a => 2,c => 4}

Returns a tuple {ok, Value}, where Value is the value associated with Key, or error if no value is associated with Key in Map.

The call fails with a {badmap,Map} exception if Map is not a map.

Example:

> Map = #{"hi" => 42}, Key = "hi", maps:find(Key,Map). {ok,42}

Calls F(K, V, AccIn) for every K to value V association in MapOrIter in any order. Function fun F/3 must return a new accumulator, which is passed to the next successive call. This function returns the final value of the accumulator. The initial accumulator value Init is returned if the map is empty.

The call fails with a {badmap,Map} exception if MapOrIter is not a map or valid iterator, or with badarg if Fun is not a function of arity 3.

Example:

> Fun = fun(K,V,AccIn) when is_list(K) -> AccIn + V end, Map = #{"k1" => 1, "k2" => 2, "k3" => 3}, maps:fold(Fun,0,Map). 6

Takes a list of key-value tuples elements and builds a map. The associations can be in any order, and both keys and values in the association can be of any term. If the same key appears more than once, the latter (right-most) value is used and the previous values are ignored.

Example:

> List = [{"a",ignored},{1337,"value two"},{42,value_three},{"a",1}], maps:from_list(List). #{42 => value_three,1337 => "value two","a" => 1}

Returns value Value associated with Key if Map contains Key.

The call fails with a {badmap,Map} exception if Map is not a map, or with a {badkey,Key} exception if no value is associated with Key.

Example:

> Key = 1337, Map = #{42 => value_two,1337 => "value one","a" => 1}, maps:get(Key,Map). "value one"

Returns value Value associated with Key if Map contains Key. If no value is associated with Key, Default is returned.

The call fails with a {badmap,Map} exception if Map is not a map.

Example:

> Map = #{ key1 => val1, key2 => val2 }. #{key1 => val1,key2 => val2} > maps:get(key1, Map, "Default value"). val1 > maps:get(key3, Map, "Default value"). "Default value"

Returns true if map Map contains Key and returns false if it does not contain the Key.

The call fails with a {badmap,Map} exception if Map is not a map.

Example:

> Map = #{"42" => value}. #{"42" => value} > maps:is_key("42",Map). true > maps:is_key(value,Map). false
Create a map iterator.

Returns a map iterator Iterator that can be used by maps:next/1 to traverse the key-value associations in a map. When iterating over a map, the memory usage is guaranteed to be bounded no matter the size of the map.

The call fails with a {badmap,Map} exception if Map is not a map.

Example:

> M = #{ a => 1, b => 2 }. #{a => 1,b => 2} > I = maps:iterator(M), ok. ok > {K1, V1, I2} = maps:next(I), {K1, V1}. {a,1} > {K2, V2, I3} = maps:next(I2),{K2, V2}. {b,2} > maps:next(I3). none

Returns a complete list of keys, in any order, which resides within Map.

The call fails with a {badmap,Map} exception if Map is not a map.

Example:

> Map = #{42 => value_three,1337 => "value two","a" => 1}, maps:keys(Map). [42,1337,"a"]

Produces a new map Map by calling function fun F(K, V1) for every K to value V1 association in MapOrIter in any order. Function fun F/2 must return value V2 to be associated with key K for the new map Map.

The call fails with a {badmap,Map} exception if MapOrIter is not a map or valid iterator, or with badarg if Fun is not a function of arity 2.

Example:

> Fun = fun(K,V1) when is_list(K) -> V1*2 end, Map = #{"k1" => 1, "k2" => 2, "k3" => 3}, maps:map(Fun,Map). #{"k1" => 2,"k2" => 4,"k3" => 6}

Merges two maps into a single map Map3. If two keys exist in both maps, the value in Map1 is superseded by the value in Map2.

The call fails with a {badmap,Map} exception if Map1 or Map2 is not a map.

Example:

> Map1 = #{a => "value_one", b => "value_two"}, Map2 = #{a => 1, c => 2}, maps:merge(Map1,Map2). #{a => 1,b => "value_two",c => 2}

Returns a new empty map.

Example:

> maps:new(). #{}
Get the next key and value from an iterator.

Returns the next key-value association in Iterator and a new iterator for the remaining associations in the iterator.

If there are no more associations in the iterator, none is returned.

Example:

> Map = #{a => 1, b => 2, c => 3}. #{a => 1,b => 2,c => 3} > I = maps:iterator(Map), ok. ok > {K1, V1, I1} = maps:next(I), {K1, V1}. {a,1} > {K2, V2, I2} = maps:next(I1), {K2, V2}. {b,2} > {K3, V3, I3} = maps:next(I2), {K3, V3}. {c,3} > maps:next(I3). none

Associates Key with value Value and inserts the association into map Map2. If key Key already exists in map Map1, the old associated value is replaced by value Value. The function returns a new map Map2 containing the new association and the old associations in Map1.

The call fails with a {badmap,Map} exception if Map1 is not a map.

Example:

> Map = #{"a" => 1}. #{"a" => 1} > maps:put("a", 42, Map). #{"a" => 42} > maps:put("b", 1337, Map). #{"a" => 1,"b" => 1337}

Removes the Key, if it exists, and its associated value from Map1 and returns a new map Map2 without key Key.

The call fails with a {badmap,Map} exception if Map1 is not a map.

Example:

> Map = #{"a" => 1}. #{"a" => 1} > maps:remove("a",Map). #{} > maps:remove("b",Map). #{"a" => 1}

Returns the number of key-value associations in Map. This operation occurs in constant time.

Example:

> Map = #{42 => value_two,1337 => "value one","a" => 1}, maps:size(Map). 3

The function removes the Key, if it exists, and its associated value from Map1 and returns a tuple with the removed Value and the new map Map2 without key Key. If the key does not exist error is returned.

The call will fail with a {badmap,Map} exception if Map1 is not a map.

Example:

> Map = #{"a" => "hello", "b" => "world"}. #{"a" => "hello", "b" => "world"} > maps:take("a",Map). {"hello",#{"b" => "world"}} > maps:take("does not exist",Map). error

Returns a list of pairs representing the key-value associations of Map, where the pairs [{K1,V1}, ..., {Kn,Vn}] are returned in arbitrary order.

The call fails with a {badmap,Map} exception if Map is not a map.

Example:

> Map = #{42 => value_three,1337 => "value two","a" => 1}, maps:to_list(Map). [{42,value_three},{1337,"value two"},{"a",1}]

If Key exists in Map1, the old associated value is replaced by value Value. The function returns a new map Map2 containing the new associated value.

The call fails with a {badmap,Map} exception if Map1 is not a map, or with a {badkey,Key} exception if no value is associated with Key.

Example:

> Map = #{"a" => 1}. #{"a" => 1} > maps:update("a", 42, Map). #{"a" => 42}

Update a value in a Map1 associated with Key by calling Fun on the old value to get a new value. An exception {badkey,Key} is generated if Key is not present in the map.

Example:

> Map = #{"counter" => 1}, Fun = fun(V) -> V + 1 end, maps:update_with("counter",Fun,Map). #{"counter" => 2}

Update a value in a Map1 associated with Key by calling Fun on the old value to get a new value. If Key is not present in Map1 then Init will be associated with Key.

Example:

> Map = #{"counter" => 1}, Fun = fun(V) -> V + 1 end, maps:update_with("new counter",Fun,42,Map). #{"counter" => 1,"new counter" => 42}

Returns a complete list of values, in arbitrary order, contained in map Map.

The call fails with a {badmap,Map} exception if Map is not a map.

Example:

> Map = #{42 => value_three,1337 => "value two","a" => 1}, maps:values(Map). [value_three,"value two",1]

Returns a new map Map2 with the keys K1 through Kn and their associated values from map Map1. Any key in Ks that does not exist in Map1 is ignored.

Example:

> Map = #{42 => value_three,1337 => "value two","a" => 1}, Ks = ["a",42,"other key"], maps:with(Ks,Map). #{42 => value_three,"a" => 1}

Returns a new map Map2 without keys K1 through Kn and their associated values from map Map1. Any key in Ks that does not exist in Map1 is ignored

Example:

> Map = #{42 => value_three,1337 => "value two","a" => 1}, Ks = ["a",42,"other key"], maps:without(Ks,Map). #{1337 => "value two"}