<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>1996</year><year>2016</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. </legalnotice> <title>proc_lib</title> <prepared></prepared> <docno></docno> <date></date> <rev></rev> </header> <module>proc_lib</module> <modulesummary>Functions for asynchronous and synchronous start of processes adhering to the OTP design principles.</modulesummary> <description> <p>This module is used to start processes adhering to the <seealso marker="doc/design_principles:des_princ"> OTP Design Principles</seealso>. Specifically, the functions in this module are used by the OTP standard behaviors (for example, <c>gen_server</c>, <c>gen_fsm</c>, and <c>gen_statem</c>) when starting new processes. The functions can also be used to start <em>special processes</em>, user-defined processes that comply to the OTP design principles. For an example, see section <seealso marker="doc/design_principles:spec_proc"> sys and proc_lib</seealso> in OTP Design Principles.</p> <p>Some useful information is initialized when a process starts. The registered names, or the process identifiers, of the parent process, and the parent ancestors, are stored together with information about the function initially called in the process.</p> <p>While in "plain Erlang", a process is said to terminate normally only for exit reason <c>normal</c>, a process started using <c>proc_lib</c> is also said to terminate normally if it exits with reason <c>shutdown</c> or <c>{shutdown,Term}</c>. <c>shutdown</c> is the reason used when an application (supervision tree) is stopped.</p> <p>When a process that is started using <c>proc_lib</c> terminates abnormally (that is, with another exit reason than <c>normal</c>, <c>shutdown</c>, or <c>{shutdown,Term}</c>), a <em>crash report</em> is generated, which is written to terminal by the default SASL event handler. That is, the crash report is normally only visible if the SASL application is started; see <seealso marker="sasl:sasl_app"><c>sasl(6)</c></seealso> and section <seealso marker="sasl:error_logging">SASL Error Logging</seealso> in the SASL User's Guide.</p> <p>The crash report contains the previously stored information, such as ancestors and initial function, the termination reason, and information about other processes that terminate as a result of this process terminating.</p> </description> <datatypes> <datatype> <name name="spawn_option"/> <desc> <p>See <seealso marker="erts:erlang#spawn_opt/4"> <c>erlang:spawn_opt/2,3,4,5</c></seealso>.</p> </desc> </datatype> <datatype> <name name="priority_level"/> </datatype> <datatype> <name name="max_heap_size"/> <desc> <p>See <seealso marker="erts:erlang#process_flag_max_heap_size"> erlang:process_flag(max_heap_size, MaxHeapSize)</seealso>.</p> </desc> </datatype> <datatype> <name name="dict_or_pid"/> </datatype> </datatypes> <funcs> <func> <name name="format" arity="1"/> <fsummary>Format a crash report.</fsummary> <desc> <p>Equivalent to <seealso marker="#format/2"> <c>format(<anno>CrashReport</anno>, latin1)</c></seealso>.</p> </desc> </func> <func> <name name="format" arity="2"/> <fsummary>Format a crash report.</fsummary> <desc> <p>This function can be used by a user-defined event handler to format a crash report. The crash report is sent using <seealso marker="kernel:error_logger#error_report/2"> <c>error_logger:error_report(crash_report, <anno>CrashReport</anno>)</c></seealso>. That is, the event to be handled is of the format <c>{error_report, GL, {Pid, crash_report, <anno>CrashReport</anno>}}</c>, where <c>GL</c> is the group leader pid of process <c>Pid</c> that sent the crash report.</p> </desc> </func> <func> <name name="format" arity="3"/> <fsummary>Format a crash report.</fsummary> <desc> <p>This function can be used by a user-defined event handler to format a crash report. When <anno>Depth</anno> is specified as a positive integer, it is used in the format string to limit the output as follows: <c>io_lib:format("~P", [Term,<anno>Depth</anno>])</c>.</p> </desc> </func> <func> <name name="hibernate" arity="3"/> <fsummary>Hibernate a process until a message is sent to it.</fsummary> <desc> <p>This function does the same as (and does call) the <seealso marker="erts:erlang#erlang:hibernate/3"> <c>hibernate/3</c></seealso> BIF, but ensures that exception handling and logging continues to work as expected when the process wakes up.</p> <p>Always use this function instead of the BIF for processes started using <c>proc_lib</c> functions.</p> </desc> </func> <func> <name name="init_ack" arity="1"/> <name name="init_ack" arity="2"/> <fsummary>Used by a process when it has started.</fsummary> <desc> <p>This function must be used by a process that has been started by a <seealso marker="#start/3"><c>start[_link]/3,4,5</c></seealso> function. It tells <c><anno>Parent</anno></c> that the process has initialized itself, has started, or has failed to initialize itself.</p> <p>Function <c>init_ack/1</c> uses the parent value previously stored by the start function used.</p> <p>If this function is not called, the start function returns an error tuple (if a link and/or a time-out is used) or hang otherwise.</p> <p>The following example illustrates how this function and <c>proc_lib:start_link/3</c> are used:</p> <code type="none"> -module(my_proc). -export([start_link/0]). -export([init/1]). start_link() -> proc_lib:start_link(my_proc, init, [self()]). init(Parent) -> case do_initialization() of ok -> proc_lib:init_ack(Parent, {ok, self()}); {error, Reason} -> exit(Reason) end, loop(). ...</code> </desc> </func> <func> <name name="initial_call" arity="1"/> <fsummary>Extract the initial call of a <c>proc_lib</c>spawned process. </fsummary> <desc> <p>Extracts the initial call of a process that was started using one of the spawn or start functions in this module. <c><anno>Process</anno></c> can either be a pid, an integer tuple (from which a pid can be created), or the process information of a process <c>Pid</c> fetched through an <c>erlang:process_info(Pid)</c> function call.</p> <note> <p>The list <c><anno>Args</anno></c> no longer contains the arguments, but the same number of atoms as the number of arguments; the first atom is <c>'Argument__1'</c>, the second <c>'Argument__2'</c>, and so on. The reason is that the argument list could waste a significant amount of memory, and if the argument list contained funs, it could be impossible to upgrade the code for the module.</p> <p>If the process was spawned using a fun, <c>initial_call/1</c> no longer returns the fun, but the module, function for the local function implementing the fun, and the arity, for example, <c>{some_module,-work/3-fun-0-,0}</c> (meaning that the fun was created in function <c>some_module:work/3</c>). The reason is that keeping the fun would prevent code upgrade for the module, and that a significant amount of memory could be wasted.</p> </note> </desc> </func> <func> <name name="spawn" arity="1"/> <name name="spawn" arity="2"/> <name name="spawn" arity="3"/> <name name="spawn" arity="4"/> <fsummary>Spawn a new process.</fsummary> <type variable="Node"/> <type variable="Fun" name_i="1"/> <type variable="Module"/> <type variable="Function"/> <type variable="Args"/> <desc> <p>Spawns a new process and initializes it as described in the beginning of this manual page. The process is spawned using the <seealso marker="erts:erlang#spawn/1"><c>spawn</c></seealso> BIFs.</p> </desc> </func> <func> <name name="spawn_link" arity="1"/> <name name="spawn_link" arity="2"/> <name name="spawn_link" arity="3"/> <name name="spawn_link" arity="4"/> <fsummary>Spawn and link to a new process.</fsummary> <type variable="Node"/> <type variable="Fun" name_i="1"/> <type variable="Module"/> <type variable="Function"/> <type variable="Args"/> <desc> <p>Spawns a new process and initializes it as described in the beginning of this manual page. The process is spawned using the <seealso marker="erts:erlang#spawn_link/1"><c>spawn_link</c></seealso> BIFs.</p> </desc> </func> <func> <name name="spawn_opt" arity="2"/> <name name="spawn_opt" arity="3"/> <name name="spawn_opt" arity="4"/> <name name="spawn_opt" arity="5"/> <fsummary>Spawn a new process with specified options.</fsummary> <type variable="Node"/> <type variable="Fun" name_i="1"/> <type variable="Module"/> <type variable="Function"/> <type variable="Args"/> <type variable="SpawnOpts"/> <desc> <p>Spawns a new process and initializes it as described in the beginning of this manual page. The process is spawned using the <seealso marker="erts:erlang#spawn_opt/2"><c>spawn_opt</c></seealso> BIFs.</p> <note> <p>Using spawn option <c>monitor</c> is not allowed. It causes the function to fail with reason <c>badarg</c>.</p> </note> </desc> </func> <func> <name name="start" arity="3"/> <name name="start" arity="4"/> <name name="start" arity="5"/> <name name="start_link" arity="3"/> <name name="start_link" arity="4"/> <name name="start_link" arity="5"/> <fsummary>Start a new process synchronously.</fsummary> <desc> <p>Starts a new process synchronously. Spawns the process and waits for it to start. When the process has started, it <em>must</em> call <seealso marker="#init_ack/2"><c>init_ack(Parent, Ret)</c></seealso> or <seealso marker="#init_ack/1"><c>init_ack(Ret)</c></seealso>, where <c>Parent</c> is the process that evaluates this function. At this time, <c>Ret</c> is returned.</p> <p>If function <c>start_link/3,4,5</c> is used and the process crashes before it has called <c>init_ack/1,2</c>, <c>{error, <anno>Reason</anno>}</c> is returned if the calling process traps exits.</p> <p>If <c><anno>Time</anno></c> is specified as an integer, this function waits for <c><anno>Time</anno></c> milliseconds for the new process to call <c>init_ack</c>, or <c>{error, timeout}</c> is returned, and the process is killed.</p> <p>Argument <c><anno>SpawnOpts</anno></c>, if specified, is passed as the last argument to the <seealso marker="erts:erlang#spawn_opt/2"> <c>spawn_opt/2,3,4,5</c></seealso> BIF.</p> <note> <p>Using spawn option <c>monitor</c> is not allowed. It causes the function to fail with reason <c>badarg</c>.</p> </note> </desc> </func> <func> <name name="stop" arity="1"/> <fsummary>Terminate a process synchronously.</fsummary> <type variable="Process"/> <desc> <p>Equivalent to <seealso marker="#stop/3"> <c>stop(Process, normal, infinity)</c></seealso>.</p> </desc> </func> <func> <name name="stop" arity="3"/> <fsummary>Terminate a process synchronously.</fsummary> <type variable="Process"/> <type variable="Reason"/> <type variable="Timeout"/> <desc> <p>Orders the process to exit with the specified <c>Reason</c> and waits for it to terminate.</p> <p>Returns <c>ok</c> if the process exits with the specified <c>Reason</c> within <c>Timeout</c> milliseconds.</p> <p>If the call times out, a <c>timeout</c> exception is raised.</p> <p>If the process does not exist, a <c>noproc</c> exception is raised.</p> <p>The implementation of this function is based on the <c>terminate</c> system message, and requires that the process handles system messages correctly. For information about system messages, see <seealso marker="sys"><c>sys(3)</c></seealso> and section <seealso marker="doc/design_principles:spec_proc"> sys and proc_lib</seealso> in OTP Design Principles.</p> </desc> </func> <func> <name name="translate_initial_call" arity="1"/> <fsummary>Extract and translate the initial call of a <c>proc_lib</c>spawned process.</fsummary> <desc> <p>This function is used by functions <seealso marker="c#i/0"><c>c:i/0</c></seealso> and <seealso marker="c#regs/0"><c>c:regs/0</c></seealso> to present process information.</p> <p>This function extracts the initial call of a process that was started using one of the spawn or start functions in this module, and translates it to more useful information. <c><anno>Process</anno></c> can either be a pid, an integer tuple (from which a pid can be created), or the process information of a process <c>Pid</c> fetched through an <c>erlang:process_info(Pid)</c> function call.</p> <p>If the initial call is to one of the system-defined behaviors such as <c>gen_server</c> or <c>gen_event</c>, it is translated to more useful information. If a <c>gen_server</c> is spawned, the returned <c><anno>Module</anno></c> is the name of the callback module and <c><anno>Function</anno></c> is <c>init</c> (the function that initiates the new server).</p> <p>A <c>supervisor</c> and a <c>supervisor_bridge</c> are also <c>gen_server</c> processes. To return information that this process is a supervisor and the name of the callback module, <c><anno>Module</anno></c> is <c>supervisor</c> and <c><anno>Function</anno></c> is the name of the supervisor callback module. <c><anno>Arity</anno></c> is <c>1</c>, as the <c>init/1</c> function is called initially in the callback module.</p> <p>By default, <c>{proc_lib,init_p,5}</c> is returned if no information about the initial call can be found. It is assumed that the caller knows that the process has been spawned with the <c>proc_lib</c> module.</p> </desc> </func> </funcs> <section> <title>See Also</title> <p><seealso marker="kernel:error_logger"> <c>error_logger(3)</c></seealso></p> </section> </erlref>