20062018 Ericsson AB. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. tftp
tftp Trivial FTP.

Interface module for the tftp application.
DATA TYPES

ServiceConfig = Options

Options = [option()]

Most of the options are common for both the client and the server side, but some of them differs a little. The available option()s are as follows:

{debug, Level}

Level = none | error | warning | brief | normal | verbose | all

Controls the level of debug printouts. Default is none.

 {host, Host}

Host = hostname(), see inet(3).

The name or IP address of the host where the TFTP daemon resides. This option is only used by the client.

 {port, Port}

Port = int()

The TFTP port where the daemon listens. Defaults is the standardized number 69. On the server side, it can sometimes make sense to set it to 0, meaning that the daemon just picks a free port (which one is returned by function info/1).

If a socket is connected already, option {udp, [{fd, integer()}]} can be used to pass the open file descriptor to gen_udp. This can be automated by using a command-line argument stating the prebound file descriptor number. For example, if the port is 69 and file descriptor 22 is opened by setuid_socket_wrap, the command-line argument "-tftpd_69 22" triggers the prebound file descriptor 22 to be used instead of opening port 69. The UDP option {udp, [{fd, 22}]} is automatically added. See init:get_argument/ about command-line arguments and gen_udp:open/2 about UDP options.

 {port_policy, Policy}

Policy = random | Port | {range, MinPort, MaxPort}

Port = MinPort = MaxPort = int()

Policy for the selection of the temporary port that is used by the server/client during the file transfer. Default is random, which is the standardized policy. With this policy a randomized free port is used. A single port or a range of ports can be useful if the protocol passes through a firewall.

 {udp, Options}

Options = [Opt], see gen_udp:open/2.

 {use_tsize, Bool}

Bool = bool()

Flag for automated use of option tsize. With this set to true, the write_file/3 client determines the filesize and sends it to the server as the standardized tsize option. A read_file/3 client acquires only a filesize from the server by sending a zero tsize.

 {max_tsize, MaxTsize}

MaxTsize = int() | infinity

Threshold for the maximal filesize in bytes. The transfer is aborted if the limit is exceeded. Default is infinity.

 {max_conn, MaxConn}

MaxConn = int() | infinity

Threshold for the maximal number of active connections. The daemon rejects the setup of new connections if the limit is exceeded. Default is infinity.

 {TftpKey, TftpVal}

TftpKey = string()

TftpVal = string()

Name and value of a TFTP option.

 {reject, Feature}

Feature = Mode | TftpKey

 Mode = read | write

 TftpKey = string()

Controls which features to reject. This is mostly useful for the server as it can restrict the use of certain TFTP options or read/write access.

 {callback, {RegExp, Module, State}}

RegExp = string()

Module = atom()

State = term()

Registration of a callback module. When a file is to be transferred, its local filename is matched to the regular expressions of the registered callbacks. The first matching callback is used during the transfer. See read_file/3 and write_file/3.

The callback module must implement the tftp behavior, see CALLBACK FUNCTIONS.

 {logger, Module}

Module = module()()

Callback module for customized logging of errors, warnings, and info messages. The callback module must implement the tftp_logger behavior, see LOGGER FUNCTIONS. The default module is tftp_logger.

 {max_retries, MaxRetries}

MaxRetries = int()

Threshold for the maximal number of retries. By default the server/client tries to resend a message up to five times when the time-out expires.
change_config(daemons, Options) -> [{Pid, Result}] Changes configuration for all daemons. Options = [option()] Pid = pid() Result = ok | {error, Reason} Reason = term()

Changes configuration for all TFTP daemon processes.

change_config(servers, Options) -> [{Pid, Result}] Changes configuration for all servers. Options = [option()] Pid = pid() Result = ok | {error, Reason} Reason = term()

Changes configuration for all TFTP server processes.

 change_config(Pid, Options) -> Result Changes configuration for a TFTP daemon, server, or client process. Pid = pid() Options = [option()] Result = ok | {error, Reason} Reason = term()

Changes configuration for a TFTP daemon, server, or client process.

 info(daemons) -> [{Pid, Options}] Returns information about all daemons. Pid = [pid()()] Options = [option()] Reason = term()

Returns information about all TFTP daemon processes.

 info(servers) -> [{Pid, Options}] Returns information about all servers. Pid = [pid()()] Options = [option()] Reason = term()

Returns information about all TFTP server processes.

info(Pid) -> {ok, Options} | {error, Reason} Returns information about a daemon, server, or client process. Options = [option()] Reason = term()

Returns information about a TFTP daemon, server, or client process.

 read_file(RemoteFilename, LocalFilename, Options) -> {ok, LastCallbackState} | {error, Reason} Reads a (virtual) file from a TFTP server. RemoteFilename = string() LocalFilename = binary | string() Options = [option()] LastCallbackState = term() Reason = term()

Reads a (virtual) file RemoteFilename from a TFTP server.

If LocalFilename is the atom binary, tftp_binary is used as callback module. It concatenates all transferred blocks and returns them as one single binary in LastCallbackState.

If LocalFilename is a string and there are no registered callback modules, tftp_file is used as callback module. It writes each transferred block to the file named LocalFilename and returns the number of transferred bytes in LastCallbackState.

If LocalFilename is a string and there are registered callback modules, LocalFilename is tested against the regexps of these and the callback module corresponding to the first match is used, or an error tuple is returned if no matching regexp is found.

 start(Options) -> {ok, Pid} | {error, Reason} Starts a daemon process. Options = [option()] Pid = pid() Reason = term()

Starts a daemon process listening for UDP packets on a port. When it receives a request for read or write, it spawns a temporary server process handling the actual transfer of the (virtual) file.

 write_file(RemoteFilename, LocalFilename, Options) -> {ok, LastCallbackState} | {error, Reason} Writes a (virtual) file to a TFTP server. RemoteFilename = string() LocalFilename = binary() | string() Options = [option()] LastCallbackState = term() Reason = term()

Writes a (virtual) file RemoteFilename to a TFTP server.

If LocalFilename is a binary, tftp_binary is used as callback module. The binary is transferred block by block and the number of transferred bytes is returned in LastCallbackState.

If LocalFilename is a string and there are no registered callback modules, tftp_file is used as callback module. It reads the file named LocalFilename block by block and returns the number of transferred bytes in LastCallbackState.

If LocalFilename is a string and there are registered callback modules, LocalFilename is tested against the regexps of these and the callback module corresponding to the first match is used, or an error tuple is returned if no matching regexp is found.
CALLBACK FUNCTIONS

A tftp callback module is to be implemented as a tftp behavior and export the functions listed in the following.

On the server side, the callback interaction starts with a call to open/5 with the registered initial callback state. open/5 is expected to open the (virtual) file. Then either function read/1 or write/2 is invoked repeatedly, once per transferred block. At each function call, the state returned from the previous call is obtained. When the last block is encountered, function read/1 or write/2 is expected to close the (virtual) file and return its last state. Function abort/3 is only used in error situations. Function prepare/5 is not used on the server side.

On the client side, the callback interaction is the same, but it starts and ends a bit differently. It starts with a call to prepare/5 with the same arguments as open/5 takes. prepare/5 is expected to validate the TFTP options suggested by the user and to return the subset of them that it accepts. Then the options are sent to the server, which performs the same TFTP option negotiation procedure. The options that are accepted by the server are forwarded to function open/5 on the client side. On the client side, function open/5 must accept all option as-is or reject the transfer. Then the callback interaction follows the same pattern as described for the server side. When the last block is encountered in read/1 or write/2, the returned state is forwarded to the user and returned from read_file/3 or write_file/3.

If a callback (performing the file access in the TFTP server) takes too long time (more than the double TFTP time-out), the server aborts the connection and sends an error reply to the client. This implies that the server releases resources attached to the connection faster than before. The server simply assumes that the client has given up.

If the TFTP server receives yet another request from the same client (same host and port) while it already has an active connection to the client, it ignores the new request if the request is equal to the first one (same filename and options). This implies that the (new) client will be served by the already ongoing connection on the server side. By not setting up yet another connection, in parallel with the ongoing one, the server consumes less resources.

Module:abort(Code, Text, State) -> ok Aborts the file transfer. Code = undef | enoent | eacces | enospc   | badop | eexist | baduser | badopt   | int() Text = string() State = term()

Invoked when the file transfer is aborted.

The callback function is expected to clean up its used resources after the aborted file transfer, such as closing open file descriptors and so on. The function is not invoked if any of the other callback functions returns an error, as it is expected that they already have cleaned up the necessary resources. However, it is invoked if the functions fail (crash).

 Module:open(Peer, Access, Filename, Mode, SuggestedOptions, State) -> {ok, AcceptedOptions, NewState} | {error, {Code, Text}} Opens a file for read or write access. Peer = {PeerType, PeerHost, PeerPort} PeerType = inet | inet6 PeerHost = ip_address() PeerPort = integer() Access = read | write Filename = string() Mode = string() SuggestedOptions = AcceptedOptions = [{Key, Value}]  Key = Value = string() State = InitialState | term()  InitialState = [] | [{root_dir, string()}] NewState = term() Code = undef | enoent | eacces | enospc   | badop | eexist | baduser | badopt   | int() Text = string()

Opens a file for read or write access.

On the client side, where the open/5 call has been preceded by a call to prepare/5, all options must be accepted or rejected.

On the server side, where there is no preceding prepare/5 call, no new options can be added, but those present in SuggestedOptions can be omitted or replaced with new values in AcceptedOptions.

 Module:prepare(Peer, Access, Filename, Mode, SuggestedOptions, InitialState) -> {ok, AcceptedOptions, NewState} | {error, {Code, Text}} Prepares to open a file on the client side. Peer = {PeerType, PeerHost, PeerPort} PeerType = inet | inet6 PeerHost = ip_address() PeerPort = integer() Access = read | write Filename = string() Mode = string() SuggestedOptions = AcceptedOptions = [{Key, Value}]  Key = Value = string() InitialState = [] | [{root_dir, string()}] NewState = term() Code = undef | enoent | eacces | enospc   | badop | eexist | baduser | badopt   | int() Text = string()

Prepares to open a file on the client side.

No new options can be added, but those present in SuggestedOptions can be omitted or replaced with new values in AcceptedOptions.

This is followed by a call to open/4 before any read/write access is performed. AcceptedOptions is sent to the server, which replies with the options that it accepts. These are then forwarded to open/4 as SuggestedOptions.

 Module:read(State) -> {more, Bin, NewState} | {last, Bin, FileSize} | {error, {Code, Text}} Reads a chunk from the file. State = NewState = term() Bin = binary() FileSize = int() Code = undef | enoent | eacces | enospc   | badop | eexist | baduser | badopt   | int() Text = string()

Reads a chunk from the file.

The callback function is expected to close the file when the last file chunk is encountered. When an error is encountered, the callback function is expected to clean up after the aborted file transfer, such as closing open file descriptors, and so on. In both cases there will be no more calls to any of the callback functions.

 Module:write(Bin, State) -> {more, NewState} | {last, FileSize} | {error, {Code, Text}} Writes a chunk to the file. Bin = binary() State = NewState = term() FileSize = int() Code = undef | enoent | eacces | enospc   | badop | eexist | baduser | badopt   | int() Text = string()

Writes a chunk to the file.

The callback function is expected to close the file when the last file chunk is encountered. When an error is encountered, the callback function is expected to clean up after the aborted file transfer, such as closing open file descriptors, and so on. In both cases there will be no more calls to any of the callback functions.
LOGGER FUNCTIONS

A tftp_logger callback module is to be implemented as a tftp_logger behavior and export the following functions:

Logger:error_msg(Format, Data) -> ok | exit(Reason) Logs an error message. Format = string() Data = [term()] Reason = term()

Logs an error message. See error_logger:error_msg/2 for details.

 Logger:info_msg(Format, Data) -> ok | exit(Reason) Logs an info message. Format = string() Data = [term()] Reason = term()

Logs an info message. See error_logger:info_msg/2 for details.

 Logger:warning_msg(Format, Data) -> ok | exit(Reason) Logs a warning message. Format = string() Data = [term()] Reason = term()

Logs a warning message. See error_logger:warning_msg/2 for details.