#! /bin/sh # # %CopyrightBegin% # # Copyright Ericsson AB 2002-2011. All Rights Reserved. # # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in # compliance with the License. You should have received a copy of the # Erlang Public License along with this software. If not, it can be # retrieved online at http://www.erlang.org/. # # Software distributed under the License is distributed on an "AS IS" # basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See # the License for the specific language governing rights and limitations # under the License. # # %CopyrightEnd% # # Expected autoconf version EXPECTED_AUTOCONF_VERSION=2.59 # Global configuration variables # # NOTE: lazy_configure depends on '.' always being last directory if [ -z "$ONLY_ERTS" ]; then AUTOCONF_SUBDIRS="lib lib/* lib/test_server/src" fi AUTOCONF_SUBDIRS="$AUTOCONF_SUBDIRS erts ." # `bootstrap_apps' should include application that are built, or # partly built in one of the bootstrap phases. Applications that # only get some static includes copied into the bootstrap directory # should not be included. bootstrap_apps="erts lib/asn1 lib/compiler lib/hipe lib/ic lib/kernel lib/parsetools lib/sasl lib/snmp lib/stdlib lib/syntax_tools" # We will quote a bit more than needed, but the important thing is that # all that needs quoting will be quoted... DONT_QUOTE="A-Za-z0-9~/=_+-" # Utility functions usage () { echo "Available options (-a switch select all applications):" echo " setup [-a] [<configure parameters>] - does autoconf, configure and boot." echo " all [-a] <dir> - does autoconf, configure, boot, release" echo " autoconf - (re)build the configure scripts" echo " configure [<configure parameters>] - does the actual configuration" echo " boot [-a] - bootstraps and builds the system (after configure)" echo " release <target_dir> - creates a small release to <target_dir>" echo " release [-a] <target_dir> - creates full release to <target_dir>" echo " smp [-a] - build an Erlang system, smp flavor only" echo " hybrid [-a] - build an Erlang system, hybrid flavor only" echo " tests <dir> - Build testsuites to <dir>" echo "" echo "These are for cleaning up an open source distribution" echo "with prebuilt files, so that it resembles the clean developers" echo "codebase:" echo " remove_prebuilt_files - create a minimal source tree" echo " save_bootstrap - recreate primary bootstrap" echo "" echo "Special targets for Windows(tm) build:" echo " debuginfo_win32 <dir> - adds debug emulator and pdb files to <dir>" echo " installer_win32 <dir> - creates a windows installer from <dir>" echo "" echo "Before trying to build on windows, consider the following option" echo " env_win32 - echo environment settings for win32 with visual C++, use with eval" echo " env_mingw32 - echo environment settings for win32 with MinGW, use with eval" echo "" echo "Before trying to build for vxworks, consider the following option" echo " env_vxworks <cpu> - echo environment settings for vxworks, use with eval" echo "" case $version_controller in none) ;; git) echo "" echo "update_primary - build and commit a new primary bootstrap" ;; esac case $version_controller in none) ;; git) echo "" echo "update_preloaded - build and commit the preloaded modules" ;; esac } git_required () { echo "This operation must be run in a git repository." exit 1 } hide_vars () { script= for var in "$@"; do if [ "X$var" != "X" ]; then script="$script test \"X\$$var\" = \"X\" || hidden_$var=\$$var; unset $var;" fi done if [ "X$script" != "X" ]; then eval "$script" fi unset script } restore_vars () { script= for var in "$@"; do if [ "X$var" != "X" ]; then script="$script unset $var; test \"X\$hidden_$var\" = \"X\" || { $var=\$hidden_$var; export $var; } ; unset hidden_$var;" fi done if [ "X$script" != "X" ]; then eval "$script" fi unset script } check_erltop () { ERLTOP_FORCED=false if [ "X$ERL_TOP" = "X" ]; then if [ -f ./otp_build -a -f ./erts/autoconf/config.guess ]; then ERLTOP_FORCED=true ERL_TOP=`/bin/pwd` export ERL_TOP else echo "The environment variable ERL_TOP must be set." >&2 exit 1 fi fi } target_contains () { Y=`echo $TARGET | sed "s,$1,,g"` [ X"$Y" != X"$TARGET" ] return $? } determine_version_controller () { version_controller=none # The current directory is now $ERL_TOP. Find out whether # this directory is a git repository. if { git rev-parse --git-dir; } 2>/dev/null >/dev/null; then version_controller=git fi } # Execution of the different options # Special static config flags for certain platforms are set here set_config_flags () { # * Extra flags to pass to configure are placed in `CONFIG_FLAGS'. # * The command line is no longer added to `CONFIG_FLAGS' by # `set_config_flags'. It is instead passed directly to # `run_configure', or added to `CONFIG_FLAGS' at some other # place. # * `CONFIG_FLAGS' may contain flags when `set_config_flags' is # called. These flags should survive the call to `set_config_flags' # (in the cross compilation case the whole command line as well as # the cross configuration have been moved here). if target_contains linux; then XX=`echo $* | grep -v able-hipe` if [ "$*" = "$XX" ]; then CONFIG_FLAGS="$CONFIG_FLAGS --disable-hipe" fi fi if target_contains "univel-sysv4"; then CONFIG_FLAGS="$CONFIG_FLAGS --x-libraries=/usr/lib/X11" fi if target_contains free_source; then CONFIG_FLAGS="$CONFIG_FLAGS --host=$TARGET" fi # Link SSL static for all binary distributions if not overridden # Even for win32 starting with R14B03 XX=`echo $* | grep -v dynamic-ssl-lib` if [ "$*" = "$XX" ]; then CONFIG_FLAGS="--disable-dynamic-ssl-lib $CONFIG_FLAGS" fi if target_contains win32; then CONFIG_FLAGS="--build=$BUILDSYS build_alias=win32 --host=win32 --target=win32 $CONFIG_FLAGS" fi if [ "x$OVERRIDE_CONFIG_CACHE" = "x" ]; then CONFIG_FLAGS="$CONFIG_FLAGS --cache-file=/dev/null" else CONFIG_FLAGS="$CONFIG_FLAGS --cache-file=$OVERRIDE_CONFIG_CACHE" fi env_to_config_flags $erl_build_tool_vars export CONFIG_FLAGS; } NL="\ " create_lib_configure_in() { cd $ERL_TOP # Multiple versions of autoconf generates code that # don't work on all platforms (e.g. SunOS 5.8) if # sub directories are soft links. Internally at Ericsson # some OTP application directories are soft links. # An added "/." solves this problem. sdirs= for lib_app in $bootstrap_apps; do case $lib_app in lib/*) if [ -f "$lib_app/configure.in" ]; then app=`echo "$lib_app" | sed "s|lib/\(.*\)|\1|"` sdirs="${sdirs}test ! -f $app/configure || AC_CONFIG_SUBDIRS($app/.)${NL}" fi;; *) ;; esac done sed_bootstrap="s%@BOOTSTRAP_CONFIGURE_APPS@%$sdirs%g" sdirs= for lib_app in lib/*; do is_bapp=false for bapp in $bootstrap_apps; do test $bapp != $lib_app || { is_bapp=true; break; } done if [ $is_bapp = false ] && [ -f "$lib_app/configure.in" ]; then app=`echo "$lib_app" | sed "s|lib/\(.*\)|\1|"` sdirs="${sdirs} test ! -f $app/configure || AC_CONFIG_SUBDIRS($app/.)${NL}" fi done sed_non_bootstrap="s%@NON_BOOTSTRAP_CONFIGURE_APPS@%$sdirs%g" rm -f lib/configure.in sed "$sed_bootstrap;$sed_non_bootstrap" > lib/configure.in < lib/configure.in.src || { echo "Failed to create lib/configure.in" exit 1 } } do_autoconf () { create_lib_configure_in if target_contains win32; then # Select the correct autoconf on cygwin save_want_autoconf_ver=$WANT_AUTOCONF_VER WANT_AUTOCONF_VER=$EXPECTED_AUTOCONF_VERSION export WANT_AUTOCONF_VER fi exp_ac_vsn=$EXPECTED_AUTOCONF_VERSION ac_vsn_blob=`autoconf --version` ac_vsn=`echo x$ac_vsn_blob | sed "s|[^0-9]*\([0-9][^ \t\n]*\).*|\1|"` case "$ac_vsn" in $exp_ac_vsn) ;; *) echo "***************************************************" 1>&2 echo "***************************************************" 1>&2 echo "*** WARNING: System might fail to configure or" 1>&2 echo "*** might be erroneously configured" 1>&2 echo "*** since autoconf version $ac_vsn is used" 1>&2 echo "*** instead of version $exp_ac_vsn!" 1>&2 echo "***************************************************" 1>&2 echo "***************************************************" 1>&2 ;; esac if [ ! -z "$OVERRIDE_CONFIGURE" ]; then echo "Autoconf disabled on target $TARGET, but is performed on host" >&2 # We still use erts configure for erl_interface and VxWorks case "$TARGET" in *vxworks*) AUTOCONF_SUBDIRS=`echo $AUTOCONF_SUBDIRS | \ sed -e 's,lib/erl_interface,,' \ -e 's,lib/gs,,' \ -e 's,lib/megaco,,'` ;; esac fi hide_vars OVERRIDE_TARGET TARGET TARGET=$BUILDSYS export TARGET for d in $AUTOCONF_SUBDIRS; do file="$d/configure.in" [ -f "$file" ] || continue echo "" [ ! -d "$d/autom4te.cache" ] || { echo "=== cleaning $d/autom4te.cache" rm -f "$d"/autom4te.cache/* } echo "=== running autoconf in $d" ( cd "$d" && autoconf ) || exit 1 chdr=`cat "$file" | sed -n "s|.*\(AC_CONFIG_HEADER\).*|\1|p"` [ "$chdr" = "AC_CONFIG_HEADER" ] || continue echo "=== running autoheader in $d" ( cd "$d" && autoheader ) || exit 1 done restore_vars OVERRIDE_TARGET TARGET if target_contains win32; then WANT_AUTOCONF_VER=$save_want_autoconf_ver export WANT_AUTOCONF_VER fi } mk_targetdir () { if [ ! -d $ERL_TOP/$TARGET ]; then echo "creating $ERL_TOP/$TARGET" mkdir $ERL_TOP/$TARGET else echo "existing $ERL_TOP/$TARGET is used" fi } run_configure () { cdir="$ERL_TOP" [ -z "$ONLY_ERTS" ] || { cdir="$ERL_TOP/erts" CONFIG_FLAGS="$CONFIG_FLAGS --no-recursion" } echo "$cdir/configure $CONFIG_FLAGS" ${1+"$@"} (cd "$cdir" && $config_eval ./configure $CONFIG_FLAGS ${1+"$@"}) || exit 1 } env_to_config_flags () { for env_var in "$@"; do script="echo $env_var=\$$env_var; unset $env_var >/dev/null 2>&1" env_arg=`eval $script` case $env_arg in "$env_var=") ;; *[!$DONT_QUOTE]*) config_eval=eval new_arg=`echo "X$env_arg" | sed "s|^X||;s|\([^$DONT_QUOTE]\)|\\\\\\\\\1|g"` CONFIG_FLAGS="$CONFIG_FLAGS $new_arg";; *) CONFIG_FLAGS="$CONFIG_FLAGS $env_arg";; esac eval unset $env_var done } try_cross_configure () { cross_configure=no host_value= build_value= # Get `erl_xcomp_vars' . "$ERL_TOP/xcomp/erl-xcomp-vars.sh" || exit 1 for arg in ${1+"$@"}; do case "$arg" in --host=*) host_value=`echo $x | sed "s|^--host=\(.*\)|\1|"`;; --build=*) build_value=`echo $x | sed "s|^--build=\(.*\)|\1|"`;; --xcomp-conf=*) cross_configure=yes;; *) ;; esac done test $cross_configure = yes || { test "X$host_value" = "X" || { test "X$build_value" != "X" || build_value="$BUILDSYS" build_sys=`$ERL_TOP/erts/autoconf/config.sub "$build_value"` || exit 1 host_sys=`$ERL_TOP/erts/autoconf/config.sub "$host_value"` || exit 1 test "$host_sys" = "$build_sys" || cross_configure=yes } } test $cross_configure = yes || return 1 # cross configure... CONFIG_FLAGS= env_to_config_flags $erl_build_tool_vars $erl_xcomp_vars for arg in ${1+"$@"}; do case "$arg" in --host=*) host_value=`echo $x | sed "s|^--host=\(.*\)|\1|"`;; --build=*) build_value=`echo $x | sed "s|^--build=\(.*\)|\1|"`;; --xcomp-conf=*) # tilde expansion is not handled by the `configure' script, # but we do it for this argument. This argument is however not # a `configure' argument. xcomp_conf=`echo "X$arg" | sed "s|^X--xcomp-conf=\(.*\)\$|\1|g;s|\([^$DONT_QUOTE]\)|\\\\\\\\\1|g"` eval "xcomp_conf=$xcomp_conf" test "X$xcomp_conf" != "X" || { echo "$0: Missing xcomp-conf file name" exit 1 } test -f "$xcomp_conf" || { echo "$0: Missing xcomp-conf file: $xcomp_conf" exit 1 } . "$xcomp_conf" test $? -eq 0 || { echo "$0: Failed to read xcomp-conf file: $xcomp_conf" exit 1 } test "X$erl_xcomp_build" = "X" || build_value="$erl_xcomp_build" test "X$erl_xcomp_host" = "X" || host_value="$erl_xcomp_host" unset erl_xcomp_build unset erl_xcomp_host CONFIG_FLAGS="$CONFIG_FLAGS $erl_xcomp_configure_flags" unset erl_xcomp_configure_flags env_to_config_flags $erl_build_tool_vars $erl_xcomp_vars;; *[!$DONT_QUOTE]*) config_eval=eval new_arg=`echo "X$arg" | sed "s|^X||;s|\([^$DONT_QUOTE]\)|\\\\\\\\\1|g"` CONFIG_FLAGS="$CONFIG_FLAGS $new_arg";; *) CONFIG_FLAGS="$CONFIG_FLAGS $arg";; esac done CONFIG_FLAGS="--host=$host_value $CONFIG_FLAGS" test "X$build_value" != "Xguess" || build_value="$BUILDSYS" test "X$build_value" = "X" || CONFIG_FLAGS="--build=$build_value $CONFIG_FLAGS" # Configure build system for boot strap cat <<EOF * * Configuring the bootstrap build system... * EOF # hide build tools environment which is for the cross configure set_config_flags $CONFIG_FLAGS hide_vars CONFIG_FLAGS set_config_flags run_configure --enable-bootstrap-only # restore the hidden build tools environment for the cross configure restore_vars CONFIG_FLAGS COMPFIX="" cat <<EOF * * Configuring the cross host system ($host_value)... * EOF # We don't pass the command line here since we already have moved it # into CONFIG_FLAGS run_configure return 0 } maybe_copy_static_cache () { if [ '!' -z "$OVERRIDE_CONFIG_CACHE_STATIC" ]; then if [ '!' -z "$OVERRIDE_CONFIG_CACHE" ]; then cp -f "$OVERRIDE_CONFIG_CACHE_STATIC" "$OVERRIDE_CONFIG_CACHE" fi fi } do_configure () { setup_make mk_targetdir # Get `erl_build_tool_vars' . "$ERL_TOP/erl-build-tool-vars.sh" || exit 1 if [ ! -z "$OVERRIDE_CONFIGURE" ]; then case $TARGET in vxworks_*) ( cd erts/autoconf && \ $ERL_TOP/erts/autoconf/configure.vxworks $TARGET ) echo "Configuring for build system too..." >&2 hide_vars OVERRIDE_TARGET TARGET TARGET=$BUILDSYS export TARGET mk_targetdir set_config_flags "$@" run_configure "$@" restore_vars OVERRIDE_TARGET TARGET;; *) echo "Unexpected target when ordinary configure is" \ "overridden" >&2 echo 'check if $OVERRIDE_CONFIGURE and $OVERRIDE_TAGET' \ 'environments are correct.' >&2 exit 1;; esac else maybe_copy_static_cache try_cross_configure "$@" if [ $cross_configure = no ]; then CONFIG_FLAGS= set_config_flags "$@" run_configure "$@" fi fi } do_lazy_configure () { setup_make if [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then echo "Not supported for cross compilation" >&2 exit 1 fi maybe_copy_static_cache CONFIG_FLAGS= set_config_flags "$@" CONFIGURE_FLAGS="$@" [ "$CONFIG_FLAGS" = "" ] || CONFIGURE_FLAGS="$CONFIG_FLAGS $CONFIGURE_FLAGS" for c_dir in $AUTOCONF_SUBDIRS; do if test -f $ERL_TOP/$c_dir/configure.in; then dir=$ERL_TOP/$c_dir echo "" echo "=== Begin configuring $dir" xc_dep= ; xcs_dep= ; test -d $dir/$TARGET || mkdir $dir/$TARGET test -f $dir/aclocal.m4 && xc_dep="$xcs_dep $dir/aclocal.m4" test -f $dir/acsite.m4 && xc_dep="$xcs_dep $dir/acsite.m4" test x$c_dir = x"erts" && xcs_dep="$xcs_dep $dir/config.h.in" $MAKE -f $ERL_TOP/make/lazy_configure.mk \ MAKE="$MAKE" TARGET=$TARGET \ ERL_TOP=$ERL_TOP \ CONFIGURE_FLAGS="$CONFIGURE_FLAGS" \ CONFIGURE_DIR=$dir \ EXTRA_CONFIGURE_DEPENDENCIES=$xc_dep \ EXTRA_CONFIG_STATUS_DEPENDENCIES=$xcs_dep \ EXPECTED_AUTOCONF_VERSION=$EXPECTED_AUTOCONF_VERSION \ lazy_configure echo "=== Done configuring $dir" echo "" fi done } do_lazy_configure_clean () { setup_make if [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then echo "Not supported for cross compilation" >&2 exit 1 fi for c_dir in $AUTOCONF_SUBDIRS; do if test -f $ERL_TOP/$c_dir/configure.in; then dir=$ERL_TOP/$c_dir echo "" echo "=== Begin cleaning configure in $dir" xc_dep= ; xcs_dep= ; test -d $dir/$TARGET || mkdir $dir/$TARGET test -f $dir/aclocal.m4 && xc_dep="$xcs_dep $dir/aclocal.m4" test -f $dir/acsite.m4 && xc_dep="$xcs_dep $dir/acsite.m4" test x$c_dir = x"erts" && xcs_dep="$xcs_dep $dir/config.h.in" $MAKE -f $ERL_TOP/make/lazy_configure.mk \ MAKE="$MAKE" TARGET=$TARGET \ ERL_TOP=$ERL_TOP \ CONFIGURE_DIR=$dir \ EXPECTED_AUTOCONF_VERSION=$EXPECTED_AUTOCONF_VERSION \ lazy_configure_clean echo "=== Done cleaning configure in $dir" echo "" fi done } do_lazy_configure_target_clean () { setup_make if [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then echo "Not supported for cross compilation" >&2 exit 1 fi for c_dir in $AUTOCONF_SUBDIRS; do if test -f $ERL_TOP/$c_dir/configure.in; then dir=$ERL_TOP/$c_dir echo "" echo "=== Begin target cleaning configure in $dir" xc_dep= ; xcs_dep= ; test -d $dir/$TARGET || mkdir $dir/$TARGET test -f $dir/aclocal.m4 && xc_dep="$xcs_dep $dir/aclocal.m4" test -f $dir/acsite.m4 && xc_dep="$xcs_dep $dir/acsite.m4" test x$c_dir = x"erts" && xcs_dep="$xcs_dep $dir/config.h.in" $MAKE -f $ERL_TOP/make/lazy_configure.mk \ MAKE="$MAKE" TARGET=$TARGET \ ERL_TOP=$ERL_TOP \ CONFIGURE_DIR=$dir \ EXPECTED_AUTOCONF_VERSION=$EXPECTED_AUTOCONF_VERSION \ lazy_configure_target_clean echo "=== Done target cleaning configure in $dir" echo "" fi done } echo_setenv () { case "$DAILY_BUILD_SCRIPT$SHELL" in true*) echo "$1=$2";; *ash|*ksh|*/sh|*zsh|*ash) echo "$1=\"$2\";export $1$3";; *csh) echo "setenv $1 \"$2\"$3";; esac } echo_env_bootstrap () { boot_bin=$BOOTSTRAP_ROOT/bootstrap/bin echo_setenv PATH $boot_bin:$PATH } echo_env_erltop () { if [ X"$ERL_TOP" = X"" -o "$ERLTOP_FORCED" = "true" ]; then if [ -f ./otp_build ]; then # Seems to be current directory... echo_setenv ERL_TOP `/bin/pwd` ';' else echo "You need to either set ERL_TOP first or stand in the same" \ "directory as this script resides in." >&2 exit 1 fi fi } echo_envinfo () { case "$SHELL" in *csh) return 0 ;; *) ;; esac if [ X"$DAILY_BUILD_SCRIPT" = X"true" ]; then echo '# Output generated for daily build script only '\ '($DAILY_BUILD_SCRIPT=true)' else echo '# Please note:' echo '# The command you are running is supposed to be run'\ 'using the shells' echo '# "eval" builtin, like in:' echo '# $ eval `./otp_build env_<something>`' echo '# If you see this comment, you probably haven'"'"'t done that.' fi } echo_env_vxworks () { if [ -z "$1" ]; then echo "env_vxworks requires CPU architecture as parameter (ppc603, ppc860 etc)." >&2 exit 1 fi echo_env_erltop echo_setenv OVERRIDE_CONFIGURE true ';' echo_setenv OVERRIDE_TARGET vxworks_$1 echo_envinfo } echo_env_win32 () { #echo_envinfo if [ X"$SHELL" = X"" ]; then echo "You need to export the shell variable first," \ "for bourne-like shells, type:" >&2 echo 'export SHELL' >&2 echo "and for csh-like shells, type:" >&2 echo 'setenv SHELL $SHELL' >&2 echo " - then try again." >&2 exit 1 fi echo_env_erltop # Try to cope with paths containing unexpected things like stray # mixed paths (c:/something/bin) and quotes. Only C and D drive # handled. CCYGPATH=`cygpath c:\\` DCYGPATH=`cygpath d:\\` P2=`echo :$PATH | \ sed "s,\",,g;s,:[cC]:,:$CCYGPATH,g;s,:[dD]:,:$DCYGPATH,g;s,^:,,"` P3="" save_ifs=$IFS IFS=: for p in $P2; do if [ -d "$p" ]; then C1="`(cygpath -d $p 2>/dev/null || cygpath -w $p)`" 2> /dev/null C2=`cygpath "$C1" 2> /dev/null` 2> /dev/null else C2="" fi if [ ! -z "$C2" ]; then if [ -z "$P3" ];then P3="$C2" else P3="$P3:$C2" fi fi done IFS=$save_ifs echo_setenv OVERRIDE_TARGET win32 ';' echo_setenv CC cc.sh ';' echo_setenv CXX cc.sh ';' echo_setenv AR ar.sh ';' echo_setenv RANLIB true ';' if [ -f "$ERL_TOP/erts/autoconf/win32.config.cache.static" ]; then echo_setenv OVERRIDE_CONFIG_CACHE_STATIC "$ERL_TOP/erts/autoconf/win32.config.cache.static" ';' fi echo_setenv OVERRIDE_CONFIG_CACHE "$ERL_TOP/erts/autoconf/win32.config.cache" ';' echo_setenv PATH "$ERL_TOP/erts/etc/win32/cygwin_tools/vc:$ERL_TOP/erts/etc/win32/cygwin_tools:$P3" ';' echo_envinfo } echo_env_mingw32 () { #echo_envinfo if [ X"$SHELL" = X"" ]; then echo "You need to export the shell variable first," \ "for bourne-like shells, type:" >&2 echo 'export SHELL' >&2 echo "and for csh-like shells, type:" >&2 echo 'setenv SHELL $SHELL' >&2 echo " - then try again." >&2 exit 1 fi echo_env_erltop CCYGPATH=`cygpath c:\\` DCYGPATH=`cygpath d:\\` P2=`echo :$PATH | \ sed "s,\",,g;s,:[cC]:,:$CCYGPATH,g;s,:[dD]:,:$DCYGPATH,g;s,^:,,"` P3="" save_ifs=$IFS IFS=: for p in $P2; do if [ -d "$p" ]; then C1="`(cygpath -d $p 2>/dev/null || cygpath -w $p)`" 2> /dev/null C2=`cygpath "$C1" 2> /dev/null` 2> /dev/null else C2="" fi if [ ! -z "$C2" ]; then if [ -z "$P3" ];then P3="$C2" else P3="$P3:$C2" fi fi done found=false for p in $P3; do if [ -f "$p/mingw32-gcc.exe" ]; then found=$p fi done found2=false for p in $P3; do if [ -f "$p/wmc.exe" ]; then found2=$p fi done IFS=$save_ifs if [ X"$found" = X"false" ]; then echo "Could not find mingw32-gcc in PATH, build with mingw not possible!" >&2 return fi if [ X"$found2" = X"false" ]; then echo "Could not find wmc.exe in PATH, part of wine for windows, " >&2 echo "needed for message file compilation: http://wine.sourceforge.net!!" >&2 return fi echo_setenv OVERRIDE_TARGET win32 ';' echo_setenv MINGW_EXE_PATH $found ';' echo_setenv WINE_EXE_PATH $found2 ';' echo_setenv CC cc.sh ';' echo_setenv CXX cc.sh ';' echo_setenv AR ar.sh ';' echo_setenv RANLIB true ';' echo_setenv PATH "$ERL_TOP/erts/etc/win32/cygwin_tools/mingw:$ERL_TOP/erts/etc/win32/cygwin_tools:$P3" echo_envinfo } lookup_prog_in_path () { PROG=$1 save_ifs=$IFS IFS=: for p in $PATH; do # In cygwin the programs are not always executable and have .exe suffix... if [ "X$TARGET" = "Xwin32" ]; then if [ -f $p/$PROG.exe ]; then echo $p/$PROG break; fi else if [ -x $p/$PROG ]; then echo $p/$PROG break; fi fi done IFS=$save_ifs } setup_make () { if [ -z "$MAKE" ]; then case $TARGET in win32) MAKE=make;; *) if [ -n "`lookup_prog_in_path gmake`" ]; then MAKE=gmake else MAKE=make fi;; esac fi export MAKE } do_primary_git () { setup_make if [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then do_primary_cross else $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET primary_bootstrap || exit 1; fi git add -A bootstrap/lib/kernel \ bootstrap/lib/stdlib \ bootstrap/lib/compiler \ bootstrap/bin find bootstrap -name egen -o -name '*.script' -o \ -name '*.app' -o -name '*.appup' | xargs git reset HEAD git commit --no-verify -m 'Update primary bootstrap' } do_update_prel_git () { setup_make (cd $ERL_TOP/erts/preloaded/src && $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET clean) $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET preloaded || exit 1 (cd $ERL_TOP/erts/preloaded/src && $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET copy) git add -A $ERL_TOP/erts/preloaded/ebin/*.beam git commit -m 'Update preloaded modules' } do_boot () { setup_make # Bootstrap if we are cross compiling if [ X`$MAKE is_cross_configured` = Xyes ]; then TARGET=$BUILDSYS $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT CROSS_COMPILING=no TARGET=$TARGET bootstrap || exit 1 TARGET=`$MAKE target_configured` elif [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then hide_vars OVERRIDE_TARGET TARGET TARGET=$BUILDSYS $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET bootstrap || exit 1 restore_vars OVERRIDE_TARGET TARGET fi # Build it (including bootstrap if not cross compiling) $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET all || exit 1 } do_boot_emu () { setup_make if [ X`$MAKE is_cross_configured` = Xyes ]; then TARGET=`$MAKE target_configured` fi $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET emulator || exit 1 } do_release () { setup_make if [ X`$MAKE is_cross_configured` = Xyes ]; then TARGET=`$MAKE target_configured` fi $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET \ RELEASE_ROOT=$1 OTP_STRICT_INSTALL=$OTP_STRICT_INSTALL \ release || exit 1 } do_tests () { setup_make if [ X`$MAKE is_cross_configured` = Xyes ]; then TARGET=`$MAKE target_configured` fi if [ X"$1" = X"" ]; then $MAKE MAKE="$MAKE" TARGET=$TARGET release_tests || exit 1 else $MAKE MAKE="$MAKE" TARGET=$TARGET TESTSUITE_ROOT=$1 release_tests || exit 1 fi } do_debuginfo_win32 () { setup_make (cd erts/emulator && $MAKE MAKE="$MAKE" TARGET=$TARGET FLAVOR=smp debug &&\ $MAKE MAKE="$MAKE" TARGET=$TARGET FLAVOR=plain debug) || exit 1 if [ -z "$1" ]; then RELDIR=$ERL_TOP/release/$TARGET else RELDIR="$1" fi BINDIR=$ERL_TOP/bin/$TARGET EVSN=`grep '^VSN' erts/vsn.mk | sed 's,^VSN.*=[^0-9]*\([0-9].*\)$,@\1,g;s,^[^@].*,,g;s,^@,,g'` for f in beam.debug.dll beam.debug.smp.dll beam.pdb beam.smp.pdb erl.pdb werl.pdb erlexec.pdb; do if [ -f $BINDIR/$f ]; then rm -f $RELDIR/erts-$EVSN/bin/$f cp $BINDIR/$f $RELDIR/erts-$EVSN/bin/$f fi done } do_installer_win32 () { setup_make installer_dir=$ERL_TOP/erts/etc/win32/nsis (cd $installer_dir; $MAKE MAKE="$MAKE" TARGET=$TARGET TESTROOT=$1 release) || exit 1 } do_copy_primary_bootstrap () { if [ "x$1" = "x" ]; then echo "Missing bootstrap source top" 1>&2 exit 1 fi if [ ! -d $1 ]; then echo "Invalid bootstrap source top" 1>&2 exit 1 fi if [ "x$2" = "x" ]; then echo "Missing bootstrap root" 1>&2 exit 1 fi if [ ! -d $2 ]; then echo "Invalid bootstrap root" 1>&2 exit 1 fi bootstrap=$2/bootstrap bootstrap_src_top=$1 lib_src=$bootstrap_src_top/lib # kernel test -d $bootstrap/lib/kernel/ebin || mkdir -p $bootstrap/lib/kernel/ebin test -d $bootstrap/lib/kernel/include || mkdir -p $bootstrap/lib/kernel/include cp -f $lib_src/kernel/ebin/*.beam $bootstrap/lib/kernel/ebin cp -f $lib_src/kernel/include/*.hrl $bootstrap/lib/kernel/include # stdlib test -d $bootstrap/lib/stdlib/ebin || mkdir -p $bootstrap/lib/stdlib/ebin test -d $bootstrap/lib/stdlib/include || mkdir -p $bootstrap/lib/stdlib/include cp -f $lib_src/stdlib/ebin/*.beam $bootstrap/lib/stdlib/ebin cp -f $lib_src/stdlib/include/*.hrl $bootstrap/lib/stdlib/include # compiler test -d $bootstrap/lib/compiler/ebin || mkdir -p $bootstrap/lib/compiler/ebin cp -f $lib_src/compiler/ebin/*.beam $bootstrap/lib/compiler/ebin # bootstrap bin if [ $bootstrap_src_top != $ERL_TOP ]; then test -d $bootstrap/bin || mkdir -p $bootstrap/bin cp -f $bootstrap_src_top/bin/* $bootstrap/bin fi } do_save_bootstrap () { if [ ! -f $ERL_TOP/prebuilt.files ]; then echo "This is not a pre-built source distribution" 1>&2 exit 1 fi if [ -d $ERL_TOP/bootstrap/lib ]; then echo "Bootstrap already exist" 1>&2 exit 1 fi do_copy_primary_bootstrap $ERL_TOP $ERL_TOP } do_remove_prebuilt_files () { do_save_bootstrap for file in $ERL_TOP/`cat $ERL_TOP/prebuilt.files` ; do rm -f $file done } # main check_erltop cd $ERL_TOP determine_version_controller # Unset ERL_FLAGS and ERL_<Release>_FLAGS to prevent, for instance, # a value of "-hybrid" to run the hybrid emulator during bootstrap. sys_vsn=`awk '/SYSTEM_VSN = / {print $3}' < erts/vsn.mk` sys_erl_flags="ERL_${sys_vsn}_FLAGS" unset ERL_FLAGS unset ${sys_erl_flags} # Target first guess, won't necessarily hold, may be changed for # certain parameters. if [ X"$TARGET" = X"" ]; then TARGET=`$ERL_TOP/erts/autoconf/config.guess` fi BUILDSYS=$TARGET case $TARGET in *-cygwin) if [ X"$BUILD_FOR_CYGWIN" = X"" ]; then if [ X"$OVERRIDE_TARGET" = X"" -a X"$1" != X"env_win32" -a X"$1" != X"env_mingw32" ];then echo "Building for windows, you should do the " \ "following first:" >&2 echo 'eval `./otp_build env_win32`' >&2 echo 'please note that there are backticks (``) in' \ 'the command' exit 1 fi fi;; *) ;; esac if [ ! -z "$OVERRIDE_TARGET" ]; then TARGET="$OVERRIDE_TARGET" fi # Setting a bootstrap root is inherently very dangerous now that the bootstrap # is prebuilt, avoid it if not forced by setting FORCE_BOOTSTRAP_ROOT=true! if [ X"$FORCE_BOOTSTRAP_ROOT" != X"true" ]; then BOOTSTRAP_ROOT="$ERL_TOP" else if [ -z "$BOOTSTRAP_ROOT" ]; then BOOTSTRAP_ROOT="$ERL_TOP" fi fi if [ X"$1" = X"" ]; then usage exit 1 fi if [ X"$2" = X"-a" ]; then minus_a_flag=true OTP_SMALL_BUILD= else OTP_SMALL_BUILD=true minus_a_flag=false fi export OTP_SMALL_BUILD TYPE= case "$1" in all) do_autoconf; do_configure; do_boot; if [ $minus_a_flag = true ]; then shift fi; do_release "$2";; setup) shift; if [ $minus_a_flag = true ]; then shift fi; do_autoconf; do_configure "$@"; do_boot;; lazy_setup) shift; if [ $minus_a_flag = true ]; then shift fi; do_lazy_configure "$@"; do_boot;; autoconf) do_autoconf;; configure) shift; do_configure "$@";; lazy_configure) shift; do_lazy_configure "$@";; lazy_configure_clean) shift; do_lazy_configure_clean;; lazy_configure_target_clean) shift; do_lazy_configure_target_clean;; opt) do_boot;; plain|smp|hybrid) if [ $minus_a_flag = false ]; then TYPE=opt fi; FLAVOR=$1 if [ $FLAVOR = opt ]; then FLAVOR=plain fi do_boot;; update_primary) case $version_controller in git) do_primary_git ;; none) git_required ;; esac ;; update_preloaded) case $version_controller in git) do_update_prel_git ;; none) git_required ;; esac ;; primary) echo "Primary bootstrap is under version control since R13"; echo "Use update_primary if you really are"; echo "updating the primary bootstrap...";; boot) do_boot;; emulator) do_boot_emu;; release) if [ $minus_a_flag = true ]; then shift fi; do_release "$2";; tests) if [ $minus_a_flag = true ]; then shift fi; do_tests "$2";; remove_prebuilt_files) do_remove_prebuilt_files;; save_bootstrap) do_save_bootstrap;; copy_primary_bootstrap) do_copy_primary_bootstrap $2 $3;; installer_win32) if [ $minus_a_flag = true ]; then shift fi; do_installer_win32 "$2";; debuginfo_win32) if [ $minus_a_flag = true ]; then shift fi; do_debuginfo_win32 "$2";; env_win32) echo_env_win32;; env_mingw32) echo_env_mingw32;; env_vxworks) echo_env_vxworks "$2";; env_cross) echo_env_cross "$2";; env_bootstrap) echo_env_bootstrap;; *) usage;; esac