<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE chapter SYSTEM "chapter.dtd"> <chapter> <header> <copyright> <year>1997</year><year>2016</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. </legalnotice> <title>gen_fsm Behaviour</title> <prepared></prepared> <docno></docno> <date></date> <rev></rev> <file>fsm.xml</file> </header> <marker id="gen_fsm behaviour"></marker> <note> <p> There is a new behaviour <seealso marker="statem"><c>gen_statem</c></seealso> that is intended to replace <c>gen_fsm</c> for new code. It has the same features and add some really useful. This module will not be removed for the foreseeable future to keep old state machine implementations running. </p> </note> <p>This section is to be read with the <c>gen_fsm(3)</c> manual page in STDLIB, where all interface functions and callback functions are described in detail.</p> <section> <title>Finite-State Machines</title> <p>A Finite-State Machine (FSM) can be described as a set of relations of the form:</p> <pre> State(S) x Event(E) -> Actions(A), State(S')</pre> <p>These relations are interpreted as meaning:</p> <quote> <p>If we are in state <c>S</c> and event <c>E</c> occurs, we are to perform actions <c>A</c> and make a transition to state <c>S'</c>.</p> </quote> <p>For an FSM implemented using the <c>gen_fsm</c> behaviour, the state transition rules are written as a number of Erlang functions, which conform to the following convention:</p> <pre> StateName(Event, StateData) -> .. code for actions here ... {next_state, StateName', StateData'}</pre> </section> <section> <title>Example</title> <p>A door with a code lock can be viewed as an FSM. Initially, the door is locked. Anytime someone presses a button, this generates an event. Depending on what buttons have been pressed before, the sequence so far can be correct, incomplete, or wrong.</p> <p>If it is correct, the door is unlocked for 30 seconds (30,000 ms). If it is incomplete, we wait for another button to be pressed. If it is is wrong, we start all over, waiting for a new button sequence.</p> <p>Implementing the code lock FSM using <c>gen_fsm</c> results in the following callback module:</p> <marker id="ex"></marker> <code type="none"><![CDATA[ -module(code_lock). -behaviour(gen_fsm). -export([start_link/1]). -export([button/1]). -export([init/1, locked/2, open/2]). start_link(Code) -> gen_fsm:start_link({local, code_lock}, code_lock, lists:reverse(Code), []). button(Digit) -> gen_fsm:send_event(code_lock, {button, Digit}). init(Code) -> {ok, locked, {[], Code}}. locked({button, Digit}, {SoFar, Code}) -> case [Digit|SoFar] of Code -> do_unlock(), {next_state, open, {[], Code}, 30000}; Incomplete when length(Incomplete)<length(Code) -> {next_state, locked, {Incomplete, Code}}; _Wrong -> {next_state, locked, {[], Code}} end. open(timeout, State) -> do_lock(), {next_state, locked, State}.]]></code> <p>The code is explained in the next sections.</p> </section> <section> <title>Starting gen_fsm</title> <p>In the example in the previous section, the <c>gen_fsm</c> is started by calling <c>code_lock:start_link(Code)</c>:</p> <code type="none"> start_link(Code) -> gen_fsm:start_link({local, code_lock}, code_lock, lists:reverse(Code), []). </code> <p><c>start_link</c> calls the function <c>gen_fsm:start_link/4</c>, which spawns and links to a new process, a <c>gen_fsm</c>.</p> <list type="bulleted"> <item> <p>The first argument, <c>{local, code_lock}</c>, specifies the name. In this case, the <c>gen_fsm</c> is locally registered as <c>code_lock</c>.</p> <p>If the name is omitted, the <c>gen_fsm</c> is not registered. Instead its pid must be used. The name can also be given as <c>{global, Name}</c>, in which case the <c>gen_fsm</c> is registered using <c>global:register_name/2</c>.</p> </item> <item> <p>The second argument, <c>code_lock</c>, is the name of the callback module, that is, the module where the callback functions are located.</p> <p>The interface functions (<c>start_link</c> and <c>button</c>) are then located in the same module as the callback functions (<c>init</c>, <c>locked</c>, and <c>open</c>). This is normally good programming practice, to have the code corresponding to one process contained in one module.</p> </item> <item> <p>The third argument, <c>Code</c>, is a list of digits that which is passed reversed to the callback function <c>init</c>. Here, <c>init</c> gets the correct code for the lock as indata.</p> </item> <item> <p>The fourth argument, <c>[]</c>, is a list of options. See the <c>gen_fsm(3)</c> manual page for available options.</p> </item> </list> <p>If name registration succeeds, the new <c>gen_fsm</c> process calls the callback function <c>code_lock:init(Code)</c>. This function is expected to return <c>{ok, StateName, StateData}</c>, where <c>StateName</c> is the name of the initial state of the <c>gen_fsm</c>. In this case <c>locked</c>, assuming the door is locked to begin with. <c>StateData</c> is the internal state of the <c>gen_fsm</c>. (For <c>gen_fsm</c>, the internal state is often referred to 'state data' to distinguish it from the state as in states of a state machine.) In this case, the state data is the button sequence so far (empty to begin with) and the correct code of the lock.</p> <code type="none"> init(Code) -> {ok, locked, {[], Code}}.</code> <p><c>gen_fsm:start_link</c> is synchronous. It does not return until the <c>gen_fsm</c> has been initialized and is ready to receive notifications.</p> <p><c>gen_fsm:start_link</c> must be used if the <c>gen_fsm</c> is part of a supervision tree, that is, started by a supervisor. There is another function, <c>gen_fsm:start</c>, to start a standalone <c>gen_fsm</c>, that is, a <c>gen_fsm</c> that is not part of a supervision tree.</p> </section> <section> <title>Notifying about Events</title> <p>The function notifying the code lock about a button event is implemented using <c>gen_fsm:send_event/2</c>:</p> <code type="none"> button(Digit) -> gen_fsm:send_event(code_lock, {button, Digit}).</code> <p><c>code_lock</c> is the name of the <c>gen_fsm</c> and must agree with the name used to start it. <c>{button, Digit}</c> is the actual event.</p> <p>The event is made into a message and sent to the <c>gen_fsm</c>. When the event is received, the <c>gen_fsm</c> calls <c>StateName(Event, StateData)</c>, which is expected to return a tuple <c>{next_state,StateName1,StateData1}</c>. <c>StateName</c> is the name of the current state and <c>StateName1</c> is the name of the next state to go to. <c>StateData1</c> is a new value for the state data of the <c>gen_fsm</c>.</p> <code type="none"><![CDATA[ locked({button, Digit}, {SoFar, Code}) -> case [Digit|SoFar] of Code -> do_unlock(), {next_state, open, {[], Code}, 30000}; Incomplete when length(Incomplete)<length(Code) -> {next_state, locked, {Incomplete, Code}}; _Wrong -> {next_state, locked, {[], Code}}; end. open(timeout, State) -> do_lock(), {next_state, locked, State}.]]></code> <p>If the door is locked and a button is pressed, the complete button sequence so far is compared with the correct code for the lock and, depending on the result, the door is either unlocked and the <c>gen_fsm</c> goes to state <c>open</c>, or the door remains in state <c>locked</c>.</p> </section> <section> <title>Time-Outs</title> <p>When a correct code has been given, the door is unlocked and the following tuple is returned from <c>locked/2</c>:</p> <code type="none"> {next_state, open, {[], Code}, 30000};</code> <p>30,000 is a time-out value in milliseconds. After this time, that is, 30 seconds, a time-out occurs. Then, <c>StateName(timeout, StateData)</c> is called. The time-out then occurs when the door has been in state <c>open</c> for 30 seconds. After that the door is locked again:</p> <code type="none"> open(timeout, State) -> do_lock(), {next_state, locked, State}.</code> </section> <section> <title>All State Events</title> <p>Sometimes an event can arrive at any state of the <c>gen_fsm</c>. Instead of sending the message with <c>gen_fsm:send_event/2</c> and writing one clause handling the event for each state function, the message can be sent with <c>gen_fsm:send_all_state_event/2</c> and handled with <c>Module:handle_event/3</c>:</p> <code type="none"> -module(code_lock). ... -export([stop/0]). ... stop() -> gen_fsm:send_all_state_event(code_lock, stop). ... handle_event(stop, _StateName, StateData) -> {stop, normal, StateData}.</code> </section> <section> <title>Stopping</title> <section> <title>In a Supervision Tree</title> <p>If the <c>gen_fsm</c> is part of a supervision tree, no stop function is needed. The <c>gen_fsm</c> is automatically terminated by its supervisor. Exactly how this is done is defined by a <seealso marker="sup_princ#shutdown">shutdown strategy</seealso> set in the supervisor.</p> <p>If it is necessary to clean up before termination, the shutdown strategy must be a time-out value and the <c>gen_fsm</c> must be set to trap exit signals in the <c>init</c> function. When ordered to shutdown, the <c>gen_fsm</c> then calls the callback function <c>terminate(shutdown, StateName, StateData)</c>:</p> <code type="none"> init(Args) -> ..., process_flag(trap_exit, true), ..., {ok, StateName, StateData}. ... terminate(shutdown, StateName, StateData) -> ..code for cleaning up here.. ok.</code> </section> <section> <title>Standalone gen_fsm</title> <p>If the <c>gen_fsm</c> is not part of a supervision tree, a stop function can be useful, for example:</p> <code type="none"> ... -export([stop/0]). ... stop() -> gen_fsm:send_all_state_event(code_lock, stop). ... handle_event(stop, _StateName, StateData) -> {stop, normal, StateData}. ... terminate(normal, _StateName, _StateData) -> ok.</code> <p>The callback function handling the <c>stop</c> event returns a tuple, <c>{stop,normal,StateData1}</c>, where <c>normal</c> specifies that it is a normal termination and <c>StateData1</c> is a new value for the state data of the <c>gen_fsm</c>. This causes the <c>gen_fsm</c> to call <c>terminate(normal,StateName,StateData1)</c> and then it terminates gracefully:</p> </section> </section> <section> <title>Handling Other Messages</title> <p>If the <c>gen_fsm</c> is to be able to receive other messages than events, the callback function <c>handle_info(Info, StateName, StateData)</c> must be implemented to handle them. Examples of other messages are exit messages, if the <c>gen_fsm</c> is linked to other processes (than the supervisor) and trapping exit signals.</p> <code type="none"> handle_info({'EXIT', Pid, Reason}, StateName, StateData) -> ..code to handle exits here.. {next_state, StateName1, StateData1}.</code> <p>The code_change method must also be implemented.</p> <code type="none"> code_change(OldVsn, StateName, StateData, Extra) -> ..code to convert state (and more) during code change {ok, NextStateName, NewStateData}</code> </section> </chapter>