Established Automata theory does not deal much with how a state transition is triggered, but assumes that the output is a function of the input (and the state) and that they are some kind of values.

For an Event-Driven State Machine, the input is an event that triggers a state transition and the output is actions executed during the state transition. It can analogously to the mathematical model of a Finite-State Machine be described as a set of relations of the following form:

State(S) x Event(E) -> Actions(A), State(S')

These relations are interpreted as follows: if we are in state S and event E occurs, we are to perform actions A and make a transition to state S'. Notice that S' can be equal to S.

As A and S' depend only on S and E, the kind of state machine described here is a Mealy Machine (see, for example, the corresponding Wikipedia article).

Like most gen_ behaviors, gen_statem keeps a server Data besides the state. Because of this, and as there is no restriction on the number of states (assuming that there is enough virtual machine memory) or on the number of distinct input events, a state machine implemented with this behavior is in fact Turing complete. But it feels mostly like an Event-Driven Mealy Machine.

This example starts off as equivalent to the example in section gen_fsm Behavior. In later sections, additions and tweaks are made using features in gen_statem that gen_fsm does not have. The end of this chapter provides the example again with all the added features.

A door with a code lock can be seen as a state machine. Initially, the door is locked. When someone presses a button, an event is generated. Depending on what buttons have been pressed before, the sequence so far can be correct, incomplete, or wrong. If correct, the door is unlocked for 10 seconds (10,000 milliseconds). If incomplete, we wait for another button to be pressed. If wrong, we start all over, waiting for a new button sequence.

This code lock state machine can be implemented using gen_statem with the following callback module:

The code is explained in the next sections.

In the example in the previous section, gen_statem is started by calling code_lock:start_link(Code):

start_link calls function gen_statem:start_link/4, which spawns and links to a new process, a gen_statem.

If name registration succeeds, the new gen_statem process calls callback function code_lock:init(Code). This function is expected to return {CallbackMode,State,Data}, where CallbackMode selects callback module state function mode, in this case state_functions through macro ?CALLBACK_MODE. That is, each state has got its own handler function. State is the initial state of the gen_statem, in this case locked; assuming that the door is locked to begin with. Data is the internal server data of the gen_statem. Here the server data is a map with key code that stores the correct button sequence, and key remaining that stores the remaining correct button sequence (the same as the code to begin with).

Function gen_statem:start_link is synchronous. It does not return until the gen_statem is initialized and is ready to receive events.

Function gen_statem:start_link must be used if the gen_statem is part of a supervision tree, that is, started by a supervisor. Another function, gen_statem:start can be used to start a standalone gen_statem, that is, a gen_statem that is not part of a supervision tree.

The function notifying the code lock about a button event is implemented using gen_statem:cast/2:

The first argument is the name of the gen_statem and must agree with the name used to start it. So, we use the same macro ?NAME as when starting. {button,Digit} is the event content.

The event is made into a message and sent to the gen_statem. When the event is received, the gen_statem calls StateName(cast, Event, Data), which is expected to return a tuple {next_state,NewStateName,NewData}. StateName is the name of the current state and NewStateName is the name of the next state to go to. NewData is a new value for the server data of the gen_statem.

If the door is locked and a button is pressed, the pressed button is compared with the next correct button. Depending on the result, the door is either unlocked and the gen_statem goes to state open, or the door remains in state locked.

If the pressed button is incorrect, the server data restarts from the start of the code sequence.

In state open, any button locks the door, as any event cancels the event timer, so no time-out event occurs after a button event.

When a correct code has been given, the door is unlocked and the following tuple is returned from locked/2:

10,000 is a time-out value in milliseconds. After this time (10 seconds), a time-out occurs. Then, StateName(timeout, 10000, Data) is called. The time-out occurs when the door has been in state open for 10 seconds. After that the door is locked again:

Sometimes events can arrive in any state of the gen_statem. It is convenient to handle these in a common state handler function that all state functions call for events not specific to the state.

Consider a code_length/0 function that returns the length of the correct code (that should not be sensitive to reveal). We dispatch all events that are not state-specific to the common function handle_event/3:

This example uses gen_statem:call/2, which waits for a reply from the server. The reply is sent with a {reply,From,Reply} tuple in an action list in the {keep_state,...} tuple that retains the current state.

If mode handle_event_function is used, all events are handled in Module:handle_event/4 and we can (but do not have to) use an event-centered approach where we first branch depending on event and then depending on state:

In the first sections actions were mentioned as a part of the general state machine model. These general actions are implemented with the code that callback module gen_statem executes in an event-handling callback function before returning to the gen_statem engine.

There are more specific state-transition actions that a callback function can order the gen_statem engine to do after the callback function return. These are ordered by returning a list of actions in the return tuple from the callback function. These state transition actions affect the gen_statem engine itself and can do the following:

In the example earlier was mentioned the event time-out and replying to a caller. An example of event postponing is included later in this chapter. For details, see the gen_statem(3) manual page. You can, for example, reply to many callers and generate multiple next events to handle.

The previous sections mentioned a few event types. Events of all types are handled in the same callback function, for a given state, and the function gets EventType and EventContent as arguments.

The following is a complete list of event types and where they come from:

The time-out event generated by state transition action {timeout,Time,EventContent} is an event time-out, that is, if an event arrives the timer is cancelled. You get either an event or a time-out, but not both.

Often you want a timer not to be cancelled by any event or you want to start a timer in one state and respond to the time-out in another. This can be accomplished with a regular Erlang timer: erlang:start_timer.

For the example so far in this chapter: using the gen_statem event timer has the consequence that if a button event is generated while in the open state, the time-out is cancelled and the button event is delivered. So, we choose to lock the door if this occurred.

Suppose that we do not want a button to lock the door, instead we want to ignore button events in the open state. Then we start a timer when entering the open state and wait for it to expire while ignoring button events:

If you need to cancel a timer because of some other event, you can use erlang:cancel_timer(Tref). Notice that a time-out message cannot arrive after this, unless you have postponed it (see the next section) before, so ensure that you do not accidentally postpone such messages.

Another way to cancel a timer is not to cancel it, but to ignore it if it arrives in a state where it is known to be late.

If you want to ignore a particular event in the current state and handle it in a future state, you can postpone the event. A postponed event is retried after the state has changed, that is, OldState =/= NewState.

Postponing is ordered by the state transition action postpone.

In this example, instead of ignoring button events while in the open state, we can postpone them and they are queued and later handled in the locked state:

The fact that a postponed event is only retried after a state change translates into a requirement on the event and state space. If you have a choice between storing a state data item in the State or in the Data: if a change in the item value affects which events that are handled, then this item is to be part of the state.

You want to avoid that you maybe much later decide to postpone an event in one state and by misfortune it is never retried, as the code only changes the Data but not the State.

It can sometimes be beneficial to be able to generate events to your own state machine. This can be done with the state transition action {next_event,EventType,EventContent}.

You can generate events of any existing type, but the internal type can only be generated through action next_event. Hence, it cannot come from an external source, so you can be certain that an internal event is an event from your state machine to itself.

One example of using self-generated events can be when you have a state machine specification that uses state entry actions. You can code that using a dedicated function to do the state transition. But if you want that code to be visible besides the other state logic, you can insert an internal event that does the entry actions. This has the same unfortunate consequence as using state transition functions: everywhere you go to the state, you must explicitly insert the internal event or use a state transition function.

The following is an implementation of entry actions using internal events with content enter using a helper function enter/3 for state entry:

This section includes the example after all mentioned modifications and some more using the entry actions, which deserves a new state diagram:

Notice that this state diagram does not specify how to handle a button event in the state open. So, you need to read somewhere else that unspecified events must be ignored as in not consumed but handled in some other state. Also, the state diagram does not show that the code_length/0 call must be handled in every state.

Notice that postponing buttons from the locked state to the open state feels like the wrong thing to do for a code lock, but it at least illustrates event postponing.

The example servers so far in this chapter print the full internal state in the error log, for example, when killed by an exit signal or because of an internal error. This state contains both the code lock code and which digits that remain to unlock.

This state data can be regarded as sensitive, and maybe not what you want in the error log because of some unpredictable event.

Another reason to filter the state can be that the state is too large to print, as it fills the error log with uninteresting details.

To avoid this, you can format the internal state that gets in the error log and gets returned from sys:get_status/1,2 by implementing function Module:format_status/2, for example like this:

It is not mandatory to implement a Module:format_status/2 function. If you do not, a default implementation is used that does the same as this example function without filtering the Data term, that is, StateData = {State,Data}.

The callback mode handle_event_function enables using a non-atom state as described in section Callback Modes, for example, a complex state term like a tuple.

One reason to use this is when you have a state item that affects the event handling, in particular in combination with postponing events. We complicate the previous example by introducing a configurable lock button (this is the state item in question), which in the open state immediately locks the door, and an API function set_lock_button/1 to set the lock button.

Suppose now that we call set_lock_button while the door is open, and have already postponed a button event that until now was not the lock button. The sensible thing can be to say that the button was pressed too early so it is not to be recognized as the lock button. However, then it can be surprising that a button event that now is the lock button event arrives (as retried postponed) immediately after the state transits to locked.

So we make the button/1 function synchronous by using gen_statem:call and still postpone its events in the open state. Then a call to button/1 during the open state does not return until the state transits to locked, as it is there the event is handled and the reply is sent.

If a process now calls set_lock_button/1 to change the lock button while another process hangs in button/1 with the new lock button, it can be expected that the hanging lock button call immediately takes effect and locks the lock. Therefore, we make the current lock button a part of the state, so that when we change the lock button, the state changes and all postponed events are retried.

We define the state as {StateName,LockButton}, where StateName is as before and LockButton is the current lock button:

It can be an ill-fitting model for a physical code lock that the button/1 call can hang until the lock is locked. But for an API in general it is not that strange.

If you have many servers in one node and they have some state(s) in their lifetime in which the servers can be expected to idle for a while, and the amount of heap memory all these servers need is a problem, then the memory footprint of a server can be mimimized by hibernating it through proc_lib:hibernate/3.

We can in this example hibernate in the {open,_} state, because what normally occurs in that state is that the state time-out after a while triggers a transition to {locked,_}:

The [hibernate] action list on the last line when entering the {open,_} state is the only change. If any event arrives in the {open,_}, state, we do not bother to rehibernate, so the server stays awake after any event.

To change that we would need to insert action hibernate in more places. For example, for the state-independent set_lock_button and code_length operations that then would have to be aware of using hibernate while in the {open,_} state, which would clutter the code.

This server probably does not use heap memory worth hibernating for. To gain anything from hibernation, your server would have to produce some garbage during callback execution, for which this example server can serve as a bad example.