From 6adcbaf611cbe33dc81687190e077dd927a45e54 Mon Sep 17 00:00:00 2001 From: Eric Date: Wed, 21 Nov 2012 17:19:14 -0500 Subject: remove docs (they have been moved to the wiki) Signed-off-by: Jordan Wilberding --- docs/conf.py | 285 ------------------------------------------------- docs/configuration.rst | 89 --------------- docs/docs.mkf | 154 -------------------------- docs/index.rst | 22 ---- docs/overview.rst | 58 ---------- 5 files changed, 608 deletions(-) delete mode 100644 docs/conf.py delete mode 100644 docs/configuration.rst delete mode 100644 docs/docs.mkf delete mode 100644 docs/index.rst delete mode 100644 docs/overview.rst (limited to 'docs') diff --git a/docs/conf.py b/docs/conf.py deleted file mode 100644 index f29af4c..0000000 --- a/docs/conf.py +++ /dev/null @@ -1,285 +0,0 @@ -# -*- coding: utf-8 -*- -# -# Relcool documentation build configuration file, created by -# sphinx-quickstart on Mon Sep 10 10:04:06 2012. -# -# This file is execfile()d with the current directory set to its containing dir. -# -# Note that not all possible configuration values are present in this -# autogenerated file. -# -# All configuration values have a default; values that are commented out -# serve to show the default. - -import sys, os - -# If extensions (or modules to document with autodoc) are in another directory, -# add these directories to sys.path here. If the directory is relative to the -# documentation root, use os.path.abspath to make it absolute, like shown here. -#sys.path.insert(0, os.path.abspath('.')) - -# -- General configuration ----------------------------------------------------- - -# If your documentation needs a minimal Sphinx version, state it here. -#needs_sphinx = '1.0' - -# Add any Sphinx extension module names here, as strings. They can be extensions -# coming with Sphinx (named 'sphinx.ext.*') or your custom ones. -extensions = [] - -# Add any paths that contain templates here, relative to this directory. -templates_path = ['_templates'] - -# The suffix of source filenames. -source_suffix = '.rst' - -# The encoding of source files. -#source_encoding = 'utf-8-sig' - -# The master toctree document. -master_doc = 'index' - -# General information about the project. -project = u'Relcool' -copyright = u'2012, Eric B MErritt' - -# The version info for the project you're documenting, acts as replacement for -# |version| and |release|, also used in various other places throughout the -# built documents. -# -# The short X.Y version. -version = '0.0.1' -# The full version, including alpha/beta/rc tags. -release = '0.0.1' - -# The language for content autogenerated by Sphinx. Refer to documentation -# for a list of supported languages. -#language = None - -# There are two options for replacing |today|: either, you set today to some -# non-false value, then it is used: -#today = '' -# Else, today_fmt is used as the format for a strftime call. -#today_fmt = '%B %d, %Y' - -# List of patterns, relative to source directory, that match files and -# directories to ignore when looking for source files. -exclude_patterns = ['_build'] - -# The reST default role (used for this markup: `text`) to use for all documents. -#default_role = None - -# If true, '()' will be appended to :func: etc. cross-reference text. -#add_function_parentheses = True - -# If true, the current module name will be prepended to all description -# unit titles (such as .. function::). -#add_module_names = True - -# If true, sectionauthor and moduleauthor directives will be shown in the -# output. They are ignored by default. -#show_authors = False - -# The name of the Pygments (syntax highlighting) style to use. -pygments_style = 'sphinx' - -# A list of ignored prefixes for module index sorting. -#modindex_common_prefix = [] - - -# -- Options for HTML output --------------------------------------------------- - -# The theme to use for HTML and HTML Help pages. See the documentation for -# a list of builtin themes. -html_theme = 'default' - -# Theme options are theme-specific and customize the look and feel of a theme -# further. For a list of options available for each theme, see the -# documentation. -#html_theme_options = {} - -# Add any paths that contain custom themes here, relative to this directory. -#html_theme_path = [] - -# The name for this set of Sphinx documents. If None, it defaults to -# " v documentation". -#html_title = None - -# A shorter title for the navigation bar. Default is the same as html_title. -#html_short_title = None - -# The name of an image file (relative to this directory) to place at the top -# of the sidebar. -#html_logo = None - -# The name of an image file (within the static path) to use as favicon of the -# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 -# pixels large. -#html_favicon = None - -# Add any paths that contain custom static files (such as style sheets) here, -# relative to this directory. They are copied after the builtin static files, -# so a file named "default.css" will overwrite the builtin "default.css". -html_static_path = ['_static'] - -# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, -# using the given strftime format. -#html_last_updated_fmt = '%b %d, %Y' - -# If true, SmartyPants will be used to convert quotes and dashes to -# typographically correct entities. -#html_use_smartypants = True - -# Custom sidebar templates, maps document names to template names. -#html_sidebars = {} - -# Additional templates that should be rendered to pages, maps page names to -# template names. -#html_additional_pages = {} - -# If false, no module index is generated. -#html_domain_indices = True - -# If false, no index is generated. -#html_use_index = True - -# If true, the index is split into individual pages for each letter. -#html_split_index = False - -# If true, links to the reST sources are added to the pages. -#html_show_sourcelink = True - -# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. -#html_show_sphinx = True - -# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. -#html_show_copyright = True - -# If true, an OpenSearch description file will be output, and all pages will -# contain a tag referring to it. The value of this option must be the -# base URL from which the finished HTML is served. -#html_use_opensearch = '' - -# This is the file name suffix for HTML files (e.g. ".xhtml"). -#html_file_suffix = None - -# Output file base name for HTML help builder. -htmlhelp_basename = 'Relcooldoc' - - -# -- Options for LaTeX output -------------------------------------------------- - -latex_elements = { -# The paper size ('letterpaper' or 'a4paper'). -#'papersize': 'letterpaper', - -# The font size ('10pt', '11pt' or '12pt'). -#'pointsize': '10pt', - -# Additional stuff for the LaTeX preamble. -#'preamble': '', -} - -# Grouping the document tree into LaTeX files. List of tuples -# (source start file, target name, title, author, documentclass [howto/manual]). -latex_documents = [ - ('index', 'Relcool.tex', u'Relcool Documentation', - u'Eric B MErritt', 'manual'), -] - -# The name of an image file (relative to this directory) to place at the top of -# the title page. -#latex_logo = None - -# For "manual" documents, if this is true, then toplevel headings are parts, -# not chapters. -#latex_use_parts = False - -# If true, show page references after internal links. -#latex_show_pagerefs = False - -# If true, show URL addresses after external links. -#latex_show_urls = False - -# Documents to append as an appendix to all manuals. -#latex_appendices = [] - -# If false, no module index is generated. -#latex_domain_indices = True - - -# -- Options for manual page output -------------------------------------------- - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - ('index', 'relcool', u'Relcool Documentation', - [u'Eric B MErritt'], 1) -] - -# If true, show URL addresses after external links. -#man_show_urls = False - - -# -- Options for Texinfo output ------------------------------------------------ - -# Grouping the document tree into Texinfo files. List of tuples -# (source start file, target name, title, author, -# dir menu entry, description, category) -texinfo_documents = [ - ('index', 'Relcool', u'Relcool Documentation', - u'Eric B MErritt', 'Relcool', 'One line description of project.', - 'Miscellaneous'), -] - -# Documents to append as an appendix to all manuals. -#texinfo_appendices = [] - -# If false, no module index is generated. -#texinfo_domain_indices = True - -# How to display URL addresses: 'footnote', 'no', or 'inline'. -#texinfo_show_urls = 'footnote' - - -# -- Options for Epub output --------------------------------------------------- - -# Bibliographic Dublin Core info. -epub_title = u'Relcool' -epub_author = u'Eric B MErritt' -epub_publisher = u'Eric B MErritt' -epub_copyright = u'2012, Eric B MErritt' - -# The language of the text. It defaults to the language option -# or en if the language is not set. -#epub_language = '' - -# The scheme of the identifier. Typical schemes are ISBN or URL. -#epub_scheme = '' - -# The unique identifier of the text. This can be a ISBN number -# or the project homepage. -#epub_identifier = '' - -# A unique identification for the text. -#epub_uid = '' - -# A tuple containing the cover image and cover page html template filenames. -#epub_cover = () - -# HTML files that should be inserted before the pages created by sphinx. -# The format is a list of tuples containing the path and title. -#epub_pre_files = [] - -# HTML files shat should be inserted after the pages created by sphinx. -# The format is a list of tuples containing the path and title. -#epub_post_files = [] - -# A list of files that should not be packed into the epub file. -#epub_exclude_files = [] - -# The depth of the table of contents in toc.ncx. -#epub_tocdepth = 3 - -# Allow duplicate toc entries. -#epub_tocdup = True diff --git a/docs/configuration.rst b/docs/configuration.rst deleted file mode 100644 index 4e84deb..0000000 --- a/docs/configuration.rst +++ /dev/null @@ -1,89 +0,0 @@ -Configuration -============= - -Configuration of reltool is done via Erlang key, value elements in the -`relcool.config` file. There are various configuration elements that -can appear, each affects the running of the system in specific -ways. Note that these must be complete Erlang terms terminated by a -`.`. - -Paths ------ - -Paths is a way to add additional code paths (that point to Erlang beam -files) to the system. These are not used for dependency resolution, -they are only used as code paths. The main use for this is simply to -provide a non-resolvable path for additional providers. - -the path confuration element looks as follows:: - - {paths, []}. - -So if we wanted to add `/usr/local/lib` and `/opt/lib` to the code -paths for the system we could add the following:: - - {paths, ["/usr/local/lib", "/opt/lib"]}. - -to our configuration. - -Providers ---------- - -Providers are how the Relcool system can be extended by a user. They -are basically Erlang modules that implement the `rcl_provider` -behaviour and are available via a code path. See the section on -providers for more information. - -The `providers` element provides a completely new list of providers, -replacing any providers that may already exist. The provider element -is as follows:: - - {providers, }. - -Lets say I have three providers; `my_custom_assembler`, -`my_rpm_assembler` and `my_deb_assembler`. I could make these the -complete list of providers by doing the following in my config:: - - {providers, [my_custom_assembler, - my_rpm_assembler, - my_deb_assembler]}. - -Order is important in the providers as they will be executed in the -order specified. - -Add Providers -------------- - -`add_providers` is very similar to `providers` with the exception that -the listed providers are added to the end of the current list of -providers rather then replacing the list all together. Add providres -looks as follows:: - - - {add_providers, }. - -Lets take our previous example but only add `my_rpm_assembler` and -`my_deb_assembler` to the existing list of providers. We do this by -adding the following:: - - {add_providers, [my_rpm_assembler, - my_deb_assembler]}. - -Releases --------- - -Release configuration is the bread and butter, the blood and bones of -the Relcool system. It provides the framework for realizing -dependencies in the system. The release element basically minics the -standard _Erlang/OTP Release Metadata file format: -http://www.erlang.org/doc/man/rel.html. There are two main -differences. The first is that you don't have to specify a complete -list of applications and you may specify version constraints instead -of hard versions. - - -{release, {relname, vsn}, - app goals} -{release, {relname, vsn}, -{erts, vsn}, -app goals} diff --git a/docs/docs.mkf b/docs/docs.mkf deleted file mode 100644 index 6987063..0000000 --- a/docs/docs.mkf +++ /dev/null @@ -1,154 +0,0 @@ -# -*- mode: Makefile; fill-column: 80; comment-column: 75; -*- -# Makefile for Sphinx documentation -# - -# You can set these variables from the command line. -SPHINXOPTS = -SPHINXBUILD = sphinx-build -PAPER = -BUILDDIR = _build - -# Internal variables. -PAPEROPT_a4 = -D latex_paper_size=a4 -PAPEROPT_letter = -D latex_paper_size=letter -ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . -# the i18n builder cannot share the environment and doctrees with the others -I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . - -.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext - -doc-help: - @echo "Please use \`make ' where is one of" - @echo " html to make standalone HTML files" - @echo " dirhtml to make HTML files named index.html in directories" - @echo " singlehtml to make a single large HTML file" - @echo " pickle to make pickle files" - @echo " json to make JSON files" - @echo " htmlhelp to make HTML files and a HTML help project" - @echo " qthelp to make HTML files and a qthelp project" - @echo " devhelp to make HTML files and a Devhelp project" - @echo " epub to make an epub" - @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" - @echo " latexpdf to make LaTeX files and run them through pdflatex" - @echo " text to make text files" - @echo " man to make manual pages" - @echo " texinfo to make Texinfo files" - @echo " info to make Texinfo files and run them through makeinfo" - @echo " gettext to make PO message catalogs" - @echo " changes to make an overview of all changed/added/deprecated items" - @echo " linkcheck to check all external links for integrity" - @echo " doctest to run all doctests embedded in the documentation (if enabled)" - -doc-clean: - -rm -rf $(BUILDDIR)/* - -html: - $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html - @echo - @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." - -dirhtml: - $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml - @echo - @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." - -singlehtml: - $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml - @echo - @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." - -pickle: - $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle - @echo - @echo "Build finished; now you can process the pickle files." - -json: - $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json - @echo - @echo "Build finished; now you can process the JSON files." - -htmlhelp: - $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp - @echo - @echo "Build finished; now you can run HTML Help Workshop with the" \ - ".hhp project file in $(BUILDDIR)/htmlhelp." - -qthelp: - $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp - @echo - @echo "Build finished; now you can run "qcollectiongenerator" with the" \ - ".qhcp project file in $(BUILDDIR)/qthelp, like this:" - @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Relcool.qhcp" - @echo "To view the help file:" - @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Relcool.qhc" - -devhelp: - $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp - @echo - @echo "Build finished." - @echo "To view the help file:" - @echo "# mkdir -p $$HOME/.local/share/devhelp/Relcool" - @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Relcool" - @echo "# devhelp" - -epub: - $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub - @echo - @echo "Build finished. The epub file is in $(BUILDDIR)/epub." - -latex: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo - @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." - @echo "Run \`make' in that directory to run these through (pdf)latex" \ - "(use \`make latexpdf' here to do that automatically)." - -latexpdf: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo "Running LaTeX files through pdflatex..." - $(MAKE) -C $(BUILDDIR)/latex all-pdf - @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." - -text: - $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text - @echo - @echo "Build finished. The text files are in $(BUILDDIR)/text." - -man: - $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man - @echo - @echo "Build finished. The manual pages are in $(BUILDDIR)/man." - -texinfo: - $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo - @echo - @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." - @echo "Run \`make' in that directory to run these through makeinfo" \ - "(use \`make info' here to do that automatically)." - -info: - $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo - @echo "Running Texinfo files through makeinfo..." - make -C $(BUILDDIR)/texinfo info - @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." - -gettext: - $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale - @echo - @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." - -changes: - $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes - @echo - @echo "The overview file is in $(BUILDDIR)/changes." - -linkcheck: - $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck - @echo - @echo "Link check complete; look for any errors in the above output " \ - "or in $(BUILDDIR)/linkcheck/output.txt." - -doctest: - $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest - @echo "Testing of doctests in the sources finished, look at the " \ - "results in $(BUILDDIR)/doctest/output.txt." diff --git a/docs/index.rst b/docs/index.rst deleted file mode 100644 index f367ef8..0000000 --- a/docs/index.rst +++ /dev/null @@ -1,22 +0,0 @@ -.. Relcool documentation master file, created by - sphinx-quickstart on Mon Sep 10 10:04:06 2012. - You can adapt this file completely to your liking, but it should at least - contain the root `toctree` directive. - -Welcome to Relcool's documentation! -=================================== - -Contents: - -.. toctree:: - :maxdepth: 2 - - - -Indices and tables -================== - -* :ref:`genindex` -* :ref:`modindex` -* :ref:`search` - diff --git a/docs/overview.rst b/docs/overview.rst deleted file mode 100644 index 77453a3..0000000 --- a/docs/overview.rst +++ /dev/null @@ -1,58 +0,0 @@ -Overview -======== - -Relcool is a tool that, given a specification, assembles -releases. That is it makes an assessment of all of the Erlang/OTP Apps -available to it and the constraints that you supply as part of your -configuration and resolves a complete set of OTP Applications and -thier versions for use in the release. This may be a bit hard to -understand if you are not familiar with the way version resolutions -work in package management systems. So lets look at an example. - -Lets say that you have the following OTP Applications - -* app1-1.2 - with dependencies:: - app2 - app5 - app6 -* app1-1.3 - with dependencies:: - app2 - app6 -* app2-2.0 - with dependencies:: - app6 -* app2-2.1 - with dependencies:: - app6 - app7 -* app3-2.0 -* app4-1.0.0 -* app5-3.0 -* app6-1.0 - with dependencies:: - app3 -* app7-2.0 - -This is the world of OTP Apps your Relcool knows about (basically OTP -Apps in the Library Directories you have specified). You have set a -config that looks like the following:: - - {release, {awesome_supercool, "1.0"}, - [{app1, "1.3", '>='}, - {app2, "2.0", '>'}, - app3]} - -When the Relcool process has run you will end up with a complete release as follows:: - - {release, {awesome_supercool, "1.0"}, - [{app1, "1.3"}, - {app2, "2.1"}, - {app3, "2.0"}, - {app6, "1.0"}, - {app7, "2.0"}]} - -As you can see that is a fully realied view of your direct and -transative dependencies based on the world that Relcool knows about -and the constraints that you specified in your configuration. -- cgit v1.2.3