= cowboy_stream(3)
== Name
cowboy_stream - Stream handlers
== Description
The module `cowboy_stream` defines a callback interface
and a protocol for handling HTTP streams.
An HTTP request and its associated response is called
a stream. A connection may have many streams. In HTTP/1.1
they are executed sequentially, while in HTTP/2 they are
executed concurrently.
Cowboy calls the stream handler for nearly all events
related to a stream. Exceptions vary depending on the
protocol.
Extra care must be taken when implementing stream handlers
to ensure compatibility. While some modification of the
events and commands is allowed, it is generally not a good
idea to completely omit them.
== Callbacks
Stream handlers must implement the following interface:
[source,erlang]
----
init(StreamID, Req, Opts) -> {Commands, State}
data(StreamID, IsFin, Data, State) -> {Commands, State}
info(StreamID, Info, State) -> {Commands, State}
terminate(StreamID, Reason, State) -> any()
early_error(StreamID, Reason, PartialReq, Resp, Opts) -> Resp
StreamID :: cowboy_stream:streamid()
Req :: cowboy_req:req()
Opts :: cowboy:opts()
Commands :: cowboy_stream:commands()
State :: any()
IsFin :: cowboy_stream:fin()
Data :: binary()
Info :: any()
Reason :: cowboy_stream:reason()
PartialReq - cowboy_req:req(), except all fields are optional
Resp :: cowboy_stream:resp_command()
----
HTTP/1.1 will initialize a stream only when the request-line
and all headers have been received. When errors occur before
that point Cowboy will call the callback `early_error/5`
with a partial request, the error reason and the response
Cowboy intends to send. All other events go throuh the
stream handler using the normal callbacks.
HTTP/2 will initialize the stream when the `HEADERS` block has
been fully received and decoded. Any protocol error occuring
before that will not result in a response being sent and
will therefore not go through the stream handler. In addition
Cowboy may terminate streams without sending an HTTP response
back.
The stream is initialized by calling `init/3`. All streams
that are initialized will eventually be terminated by calling
`terminate/3`.
When Cowboy receives data for the stream it will call `data/4`.
The data given is the request body after any transfer decoding
has been applied.
When Cowboy receives a message addressed to a stream, or when
Cowboy needs to inform the stream handler that an internal
event has occurred, it will call `info/3`.
[[commands]]
== Commands
Stream handlers can return a list of commands to be executed
from the `init/3`, `data/4` and `info/3` callbacks. In addition,
the `early_error/5` callback must return a response command.
// @todo The logger option and the {log, Level, Format, Args}
// options need to be documented and tested.
The following commands are defined:
[[inform_command]]
=== inform
Send an informational response to the client.
[source,erlang]
----
{inform, cowboy:http_status(), cowboy:http_headers()}
----
Any number of informational responses may be sent,
but only until the final response is sent.
[[response_command]]
=== response
Send a response to the client.
[source,erlang]
----
{response, cowboy:http_status(), cowboy:http_headers(),
cowboy_req:resp_body()}
----
No more data can be sent after this command.
[[headers_command]]
=== headers
Initiate a response to the client.
[source,erlang]
----
{headers, cowboy:http_status(), cowboy:http_headers()}
----
This initiates a response to the client. The stream
will end when a data command with the `fin` flag or
a trailer command is returned.
[[data_command]]
=== data
Send data to the client.
[source,erlang]
----
{data, fin(), iodata()}
----
[[trailers_command]]
=== trailers
Send response trailers to the client.
[source,erlang]
----
{trailers, cowboy:http_headers()}
----
[[push_command]]
=== push
Push a resource to the client.
[source,erlang]
----
{push, Method, Scheme, Host, inet:port_number(),
Path, Qs, cowboy:http_headers()}
Method = Scheme = Host = Path = Qs = binary()
----
The command will be ignored if the protocol does not provide
any server push mechanism.
=== flow
[source,erlang]
----
{flow, pos_integer()}
----
Request more data to be read from the request body. The
exact behavior depends on the protocol.
=== spawn
Inform Cowboy that a process was spawned and should be
supervised.
[source,erlang]
----
{spawn, pid(), timeout()}
----
=== error_response
Send an error response if no response was sent previously.
[source,erlang]
----
{error_response, cowboy:http_status(), cowboy:http_headers(), iodata()}
----
[[switch_protocol_command]]
=== switch_protocol
Switch to a different protocol.
[source,erlang]
----
{switch_protocol, cowboy:http_headers(), module(), state()}
----
Contains the headers that will be sent in the 101 response,
along with the module implementing the protocol we are
switching to and its initial state.
Note that the 101 informational response will not be sent
after a final response.
=== stop
Stop the stream.
[source,erlang]
----
stop
----
While no more data can be sent after the `fin` flag was set,
the stream is still tracked by Cowboy until it is stopped by
the handler.
The behavior when stopping a stream for which no response
has been sent will vary depending on the protocol. The stream
will end successfully as far as the client is concerned.
To indicate that an error occurred, either use `error_response`
before stopping, or use `internal_error`.
=== internal_error
Stop the stream with an error.
[source,erlang]
----
{internal_error, Reason, HumanReadable}
Reason = any()
HumanReadable = atom()
----
This command should be used when the stream cannot continue
because of an internal error. An `error_response` command
may be sent before that to advertise to the client why the
stream is dropped.
== Predefined events
Cowboy will forward all messages sent to the stream to
the `info/3` callback. To send a message to a stream,
send a message to the connection process with the form
`{{Pid, StreamID}, Msg}`. The connection process will
then forward `Msg` to the stream handlers.
Cowboy will also forward the exit signals for the
processes that the stream spawned.
=== EXIT
//info(_StreamID, {'EXIT', Pid, normal}, State=#state{pid=Pid}) ->
//info(_StreamID, {'EXIT', Pid, {_Reason, [_, {cow_http_hd, _, _, _}|_]}}, State=#state{pid=Pid}) ->
//info(StreamID, Exit = {'EXIT', Pid, {Reason, Stacktrace}}, State=#state{ref=Ref, pid=Pid}) ->
A process spawned by this stream has exited.
[source,erlang]
----
{'EXIT', pid(), any()}
----
This is the raw exit message without any modification.
// === read_body
//
// //info(_StreamID, {read_body, Ref, Length, _},
// //info(StreamID, {read_body, Ref, Length, Period}, State) ->
//
// TODO yeah I am not actually sure this one should be public just yet
=== inform
Same as the xref:inform_command[inform command].
Sent when the request process reads the body and an
expect: 100-continue header was present in the request,
or when the request process sends an informational
response on its own.
=== response
Same as the xref:response_command[response command].
Usually sent when the request process replies to the client.
May also be sent by Cowboy internally.
=== headers
Same as the xref:headers_command[headers command].
Sent when the request process starts replying to the client.
=== data
Same as the xref:data_command[data command].
Sent when the request process streams data to the client.
=== trailers
Same as the xref:trailers_command[trailers command].
Sent when the request process sends the trailer field values
to the client.
=== push
Same as the xref:push_command[push command].
Sent when the request process pushes a resource to the client.
=== switch_protocol
Same as the xref:switch_protocol_command[switch_protocol command].
Sent when switching to the HTTP/2 or Websocket protocol.
== Exports
The following function should be called by modules implementing
stream handlers to execute the next stream handler in the list:
* link:man:cowboy_stream:init(3)[cowboy_stream:init(3)] - Initialize a stream
* link:man:cowboy_stream:data(3)[cowboy_stream:data(3)] - Handle data for a stream
* link:man:cowboy_stream:info(3)[cowboy_stream:info(3)] - Handle a message for a stream
* link:man:cowboy_stream:terminate(3)[cowboy_stream:terminate(3)] - Terminate a stream
* link:man:cowboy_stream:early_error(3)[cowboy_stream:early_error(3)] - Handle an early error for a stream
== Types
=== commands()
[source,erlang]
----
commands() :: [Command]
----
See the xref:commands[list of commands] for details.
=== fin()
[source,erlang]
----
fin() :: fin | nofin
----
Used in commands and events to indicate that this is
the end of the stream.
=== partial_req()
[source,erlang]
----
req() :: #{
method => binary(), %% case sensitive
version => cowboy:http_version() | atom(),
scheme => binary(), %% lowercase; case insensitive
host => binary(), %% lowercase; case insensitive
port => inet:port_number(),
path => binary(), %% case sensitive
qs => binary(), %% case sensitive
headers => cowboy:http_headers(),
peer => {inet:ip_address(), inet:port_number()}
}
----
Partial request information received when an early error is
detected.
=== reason()
[source,erlang]
----
reason() :: normal | switch_protocol
| {internal_error, timeout | {error | exit | throw, any()}, HumanReadable}
| {socket_error, closed | atom(), HumanReadable}
| {stream_error, Error, HumanReadable}
| {connection_error, Error, HumanReadable}
| {stop, cow_http2:frame() | {exit, any()}, HumanReadable}
Error = atom()
HumanReadable = atom()
----
Reason for the stream termination.
=== resp_command()
[source,erlang]
----
resp_command() :: {response, cowboy:http_status(),
cowboy:http_headers(), cowboy_req:resp_body()}
----
See the xref:response_command[response command] for details.
=== streamid()
[source,erlang]
----
streamid() :: any()
----
The identifier for this stream.
The identifier is unique over the connection process.
It is possible to form a unique identifier node-wide and
cluster-wide by wrapping it in a `{self(), StreamID}`
tuple.
== Changelog
* *2.6*: The `{stop, {exit, any()}, HumanReadable}` terminate reason was added.
* *2.2*: The trailers command was introduced.
* *2.0*: Module introduced.
== See also
link:man:cowboy(7)[cowboy(7)],
link:man:cowboy_http(3)[cowboy_http(3)],
link:man:cowboy_http2(3)[cowboy_http2(3)]
